1230 lines
31 KiB
C
1230 lines
31 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* nct6775 - Platform driver for the hardware monitoring
|
|
* functionality of Nuvoton NCT677x Super-I/O chips
|
|
*
|
|
* Copyright (C) 2012 Guenter Roeck <linux@roeck-us.net>
|
|
*/
|
|
|
|
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
|
|
|
|
#include <linux/acpi.h>
|
|
#include <linux/dmi.h>
|
|
#include <linux/hwmon-sysfs.h>
|
|
#include <linux/hwmon-vid.h>
|
|
#include <linux/init.h>
|
|
#include <linux/io.h>
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/wmi.h>
|
|
|
|
#include "nct6775.h"
|
|
|
|
enum sensor_access { access_direct, access_asuswmi };
|
|
|
|
static const char * const nct6775_sio_names[] __initconst = {
|
|
"NCT6106D",
|
|
"NCT6116D",
|
|
"NCT6775F",
|
|
"NCT6776D/F",
|
|
"NCT6779D",
|
|
"NCT6791D",
|
|
"NCT6792D",
|
|
"NCT6793D",
|
|
"NCT6795D",
|
|
"NCT6796D",
|
|
"NCT6797D",
|
|
"NCT6798D",
|
|
};
|
|
|
|
static unsigned short force_id;
|
|
module_param(force_id, ushort, 0);
|
|
MODULE_PARM_DESC(force_id, "Override the detected device ID");
|
|
|
|
static unsigned short fan_debounce;
|
|
module_param(fan_debounce, ushort, 0);
|
|
MODULE_PARM_DESC(fan_debounce, "Enable debouncing for fan RPM signal");
|
|
|
|
#define DRVNAME "nct6775"
|
|
|
|
#define NCT6775_PORT_CHIPID 0x58
|
|
|
|
/*
|
|
* ISA constants
|
|
*/
|
|
|
|
#define IOREGION_ALIGNMENT (~7)
|
|
#define IOREGION_OFFSET 5
|
|
#define IOREGION_LENGTH 2
|
|
#define ADDR_REG_OFFSET 0
|
|
#define DATA_REG_OFFSET 1
|
|
|
|
/*
|
|
* Super-I/O constants and functions
|
|
*/
|
|
|
|
#define NCT6775_LD_ACPI 0x0a
|
|
#define NCT6775_LD_HWM 0x0b
|
|
#define NCT6775_LD_VID 0x0d
|
|
#define NCT6775_LD_12 0x12
|
|
|
|
#define SIO_REG_LDSEL 0x07 /* Logical device select */
|
|
#define SIO_REG_DEVID 0x20 /* Device ID (2 bytes) */
|
|
#define SIO_REG_ENABLE 0x30 /* Logical device enable */
|
|
#define SIO_REG_ADDR 0x60 /* Logical device address (2 bytes) */
|
|
|
|
#define SIO_NCT6106_ID 0xc450
|
|
#define SIO_NCT6116_ID 0xd280
|
|
#define SIO_NCT6775_ID 0xb470
|
|
#define SIO_NCT6776_ID 0xc330
|
|
#define SIO_NCT6779_ID 0xc560
|
|
#define SIO_NCT6791_ID 0xc800
|
|
#define SIO_NCT6792_ID 0xc910
|
|
#define SIO_NCT6793_ID 0xd120
|
|
#define SIO_NCT6795_ID 0xd350
|
|
#define SIO_NCT6796_ID 0xd420
|
|
#define SIO_NCT6797_ID 0xd450
|
|
#define SIO_NCT6798_ID 0xd428
|
|
#define SIO_ID_MASK 0xFFF8
|
|
|
|
/*
|
|
* Control registers
|
|
*/
|
|
#define NCT6775_REG_CR_FAN_DEBOUNCE 0xf0
|
|
|
|
struct nct6775_sio_data {
|
|
int sioreg;
|
|
int ld;
|
|
enum kinds kind;
|
|
enum sensor_access access;
|
|
|
|
/* superio_() callbacks */
|
|
void (*sio_outb)(struct nct6775_sio_data *sio_data, int reg, int val);
|
|
int (*sio_inb)(struct nct6775_sio_data *sio_data, int reg);
|
|
void (*sio_select)(struct nct6775_sio_data *sio_data, int ld);
|
|
int (*sio_enter)(struct nct6775_sio_data *sio_data);
|
|
void (*sio_exit)(struct nct6775_sio_data *sio_data);
|
|
};
|
|
|
|
#define ASUSWMI_MONITORING_GUID "466747A0-70EC-11DE-8A39-0800200C9A66"
|
|
#define ASUSWMI_METHODID_RSIO 0x5253494F
|
|
#define ASUSWMI_METHODID_WSIO 0x5753494F
|
|
#define ASUSWMI_METHODID_RHWM 0x5248574D
|
|
#define ASUSWMI_METHODID_WHWM 0x5748574D
|
|
#define ASUSWMI_UNSUPPORTED_METHOD 0xFFFFFFFE
|
|
|
|
static int nct6775_asuswmi_evaluate_method(u32 method_id, u8 bank, u8 reg, u8 val, u32 *retval)
|
|
{
|
|
#if IS_ENABLED(CONFIG_ACPI_WMI)
|
|
u32 args = bank | (reg << 8) | (val << 16);
|
|
struct acpi_buffer input = { (acpi_size) sizeof(args), &args };
|
|
struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL };
|
|
acpi_status status;
|
|
union acpi_object *obj;
|
|
u32 tmp = ASUSWMI_UNSUPPORTED_METHOD;
|
|
|
|
status = wmi_evaluate_method(ASUSWMI_MONITORING_GUID, 0,
|
|
method_id, &input, &output);
|
|
|
|
if (ACPI_FAILURE(status))
|
|
return -EIO;
|
|
|
|
obj = output.pointer;
|
|
if (obj && obj->type == ACPI_TYPE_INTEGER)
|
|
tmp = obj->integer.value;
|
|
|
|
if (retval)
|
|
*retval = tmp;
|
|
|
|
kfree(obj);
|
|
|
|
if (tmp == ASUSWMI_UNSUPPORTED_METHOD)
|
|
return -ENODEV;
|
|
return 0;
|
|
#else
|
|
return -EOPNOTSUPP;
|
|
#endif
|
|
}
|
|
|
|
static inline int nct6775_asuswmi_write(u8 bank, u8 reg, u8 val)
|
|
{
|
|
return nct6775_asuswmi_evaluate_method(ASUSWMI_METHODID_WHWM, bank,
|
|
reg, val, NULL);
|
|
}
|
|
|
|
static inline int nct6775_asuswmi_read(u8 bank, u8 reg, u8 *val)
|
|
{
|
|
u32 ret, tmp = 0;
|
|
|
|
ret = nct6775_asuswmi_evaluate_method(ASUSWMI_METHODID_RHWM, bank,
|
|
reg, 0, &tmp);
|
|
*val = tmp;
|
|
return ret;
|
|
}
|
|
|
|
static int superio_wmi_inb(struct nct6775_sio_data *sio_data, int reg)
|
|
{
|
|
int tmp = 0;
|
|
|
|
nct6775_asuswmi_evaluate_method(ASUSWMI_METHODID_RSIO, sio_data->ld,
|
|
reg, 0, &tmp);
|
|
return tmp;
|
|
}
|
|
|
|
static void superio_wmi_outb(struct nct6775_sio_data *sio_data, int reg, int val)
|
|
{
|
|
nct6775_asuswmi_evaluate_method(ASUSWMI_METHODID_WSIO, sio_data->ld,
|
|
reg, val, NULL);
|
|
}
|
|
|
|
static void superio_wmi_select(struct nct6775_sio_data *sio_data, int ld)
|
|
{
|
|
sio_data->ld = ld;
|
|
}
|
|
|
|
static int superio_wmi_enter(struct nct6775_sio_data *sio_data)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static void superio_wmi_exit(struct nct6775_sio_data *sio_data)
|
|
{
|
|
}
|
|
|
|
static void superio_outb(struct nct6775_sio_data *sio_data, int reg, int val)
|
|
{
|
|
int ioreg = sio_data->sioreg;
|
|
|
|
outb(reg, ioreg);
|
|
outb(val, ioreg + 1);
|
|
}
|
|
|
|
static int superio_inb(struct nct6775_sio_data *sio_data, int reg)
|
|
{
|
|
int ioreg = sio_data->sioreg;
|
|
|
|
outb(reg, ioreg);
|
|
return inb(ioreg + 1);
|
|
}
|
|
|
|
static void superio_select(struct nct6775_sio_data *sio_data, int ld)
|
|
{
|
|
int ioreg = sio_data->sioreg;
|
|
|
|
outb(SIO_REG_LDSEL, ioreg);
|
|
outb(ld, ioreg + 1);
|
|
}
|
|
|
|
static int superio_enter(struct nct6775_sio_data *sio_data)
|
|
{
|
|
int ioreg = sio_data->sioreg;
|
|
|
|
/*
|
|
* Try to reserve <ioreg> and <ioreg + 1> for exclusive access.
|
|
*/
|
|
if (!request_muxed_region(ioreg, 2, DRVNAME))
|
|
return -EBUSY;
|
|
|
|
outb(0x87, ioreg);
|
|
outb(0x87, ioreg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void superio_exit(struct nct6775_sio_data *sio_data)
|
|
{
|
|
int ioreg = sio_data->sioreg;
|
|
|
|
outb(0xaa, ioreg);
|
|
outb(0x02, ioreg);
|
|
outb(0x02, ioreg + 1);
|
|
release_region(ioreg, 2);
|
|
}
|
|
|
|
static inline void nct6775_wmi_set_bank(struct nct6775_data *data, u16 reg)
|
|
{
|
|
u8 bank = reg >> 8;
|
|
|
|
data->bank = bank;
|
|
}
|
|
|
|
static int nct6775_wmi_reg_read(void *ctx, unsigned int reg, unsigned int *val)
|
|
{
|
|
struct nct6775_data *data = ctx;
|
|
int err, word_sized = nct6775_reg_is_word_sized(data, reg);
|
|
u8 tmp = 0;
|
|
u16 res;
|
|
|
|
nct6775_wmi_set_bank(data, reg);
|
|
|
|
err = nct6775_asuswmi_read(data->bank, reg & 0xff, &tmp);
|
|
if (err)
|
|
return err;
|
|
|
|
res = tmp;
|
|
if (word_sized) {
|
|
err = nct6775_asuswmi_read(data->bank, (reg & 0xff) + 1, &tmp);
|
|
if (err)
|
|
return err;
|
|
|
|
res = (res << 8) + tmp;
|
|
}
|
|
*val = res;
|
|
return 0;
|
|
}
|
|
|
|
static int nct6775_wmi_reg_write(void *ctx, unsigned int reg, unsigned int value)
|
|
{
|
|
struct nct6775_data *data = ctx;
|
|
int res, word_sized = nct6775_reg_is_word_sized(data, reg);
|
|
|
|
nct6775_wmi_set_bank(data, reg);
|
|
|
|
if (word_sized) {
|
|
res = nct6775_asuswmi_write(data->bank, reg & 0xff, value >> 8);
|
|
if (res)
|
|
return res;
|
|
|
|
res = nct6775_asuswmi_write(data->bank, (reg & 0xff) + 1, value);
|
|
} else {
|
|
res = nct6775_asuswmi_write(data->bank, reg & 0xff, value);
|
|
}
|
|
|
|
return res;
|
|
}
|
|
|
|
/*
|
|
* On older chips, only registers 0x50-0x5f are banked.
|
|
* On more recent chips, all registers are banked.
|
|
* Assume that is the case and set the bank number for each access.
|
|
* Cache the bank number so it only needs to be set if it changes.
|
|
*/
|
|
static inline void nct6775_set_bank(struct nct6775_data *data, u16 reg)
|
|
{
|
|
u8 bank = reg >> 8;
|
|
|
|
if (data->bank != bank) {
|
|
outb_p(NCT6775_REG_BANK, data->addr + ADDR_REG_OFFSET);
|
|
outb_p(bank, data->addr + DATA_REG_OFFSET);
|
|
data->bank = bank;
|
|
}
|
|
}
|
|
|
|
static int nct6775_reg_read(void *ctx, unsigned int reg, unsigned int *val)
|
|
{
|
|
struct nct6775_data *data = ctx;
|
|
int word_sized = nct6775_reg_is_word_sized(data, reg);
|
|
|
|
nct6775_set_bank(data, reg);
|
|
outb_p(reg & 0xff, data->addr + ADDR_REG_OFFSET);
|
|
*val = inb_p(data->addr + DATA_REG_OFFSET);
|
|
if (word_sized) {
|
|
outb_p((reg & 0xff) + 1,
|
|
data->addr + ADDR_REG_OFFSET);
|
|
*val = (*val << 8) + inb_p(data->addr + DATA_REG_OFFSET);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int nct6775_reg_write(void *ctx, unsigned int reg, unsigned int value)
|
|
{
|
|
struct nct6775_data *data = ctx;
|
|
int word_sized = nct6775_reg_is_word_sized(data, reg);
|
|
|
|
nct6775_set_bank(data, reg);
|
|
outb_p(reg & 0xff, data->addr + ADDR_REG_OFFSET);
|
|
if (word_sized) {
|
|
outb_p(value >> 8, data->addr + DATA_REG_OFFSET);
|
|
outb_p((reg & 0xff) + 1,
|
|
data->addr + ADDR_REG_OFFSET);
|
|
}
|
|
outb_p(value & 0xff, data->addr + DATA_REG_OFFSET);
|
|
return 0;
|
|
}
|
|
|
|
static void nct6791_enable_io_mapping(struct nct6775_sio_data *sio_data)
|
|
{
|
|
int val;
|
|
|
|
val = sio_data->sio_inb(sio_data, NCT6791_REG_HM_IO_SPACE_LOCK_ENABLE);
|
|
if (val & 0x10) {
|
|
pr_info("Enabling hardware monitor logical device mappings.\n");
|
|
sio_data->sio_outb(sio_data, NCT6791_REG_HM_IO_SPACE_LOCK_ENABLE,
|
|
val & ~0x10);
|
|
}
|
|
}
|
|
|
|
static int __maybe_unused nct6775_suspend(struct device *dev)
|
|
{
|
|
int err;
|
|
u16 tmp;
|
|
struct nct6775_data *data = dev_get_drvdata(dev);
|
|
|
|
if (IS_ERR(data))
|
|
return PTR_ERR(data);
|
|
|
|
mutex_lock(&data->update_lock);
|
|
err = nct6775_read_value(data, data->REG_VBAT, &tmp);
|
|
if (err)
|
|
goto out;
|
|
data->vbat = tmp;
|
|
if (data->kind == nct6775) {
|
|
err = nct6775_read_value(data, NCT6775_REG_FANDIV1, &tmp);
|
|
if (err)
|
|
goto out;
|
|
data->fandiv1 = tmp;
|
|
|
|
err = nct6775_read_value(data, NCT6775_REG_FANDIV2, &tmp);
|
|
if (err)
|
|
goto out;
|
|
data->fandiv2 = tmp;
|
|
}
|
|
out:
|
|
mutex_unlock(&data->update_lock);
|
|
|
|
return err;
|
|
}
|
|
|
|
static int __maybe_unused nct6775_resume(struct device *dev)
|
|
{
|
|
struct nct6775_data *data = dev_get_drvdata(dev);
|
|
struct nct6775_sio_data *sio_data = dev_get_platdata(dev);
|
|
int i, j, err = 0;
|
|
u8 reg;
|
|
|
|
mutex_lock(&data->update_lock);
|
|
data->bank = 0xff; /* Force initial bank selection */
|
|
|
|
err = sio_data->sio_enter(sio_data);
|
|
if (err)
|
|
goto abort;
|
|
|
|
sio_data->sio_select(sio_data, NCT6775_LD_HWM);
|
|
reg = sio_data->sio_inb(sio_data, SIO_REG_ENABLE);
|
|
if (reg != data->sio_reg_enable)
|
|
sio_data->sio_outb(sio_data, SIO_REG_ENABLE, data->sio_reg_enable);
|
|
|
|
if (data->kind == nct6791 || data->kind == nct6792 ||
|
|
data->kind == nct6793 || data->kind == nct6795 ||
|
|
data->kind == nct6796 || data->kind == nct6797 ||
|
|
data->kind == nct6798)
|
|
nct6791_enable_io_mapping(sio_data);
|
|
|
|
sio_data->sio_exit(sio_data);
|
|
|
|
/* Restore limits */
|
|
for (i = 0; i < data->in_num; i++) {
|
|
if (!(data->have_in & BIT(i)))
|
|
continue;
|
|
|
|
err = nct6775_write_value(data, data->REG_IN_MINMAX[0][i], data->in[i][1]);
|
|
if (err)
|
|
goto abort;
|
|
err = nct6775_write_value(data, data->REG_IN_MINMAX[1][i], data->in[i][2]);
|
|
if (err)
|
|
goto abort;
|
|
}
|
|
|
|
for (i = 0; i < ARRAY_SIZE(data->fan_min); i++) {
|
|
if (!(data->has_fan_min & BIT(i)))
|
|
continue;
|
|
|
|
err = nct6775_write_value(data, data->REG_FAN_MIN[i], data->fan_min[i]);
|
|
if (err)
|
|
goto abort;
|
|
}
|
|
|
|
for (i = 0; i < NUM_TEMP; i++) {
|
|
if (!(data->have_temp & BIT(i)))
|
|
continue;
|
|
|
|
for (j = 1; j < ARRAY_SIZE(data->reg_temp); j++)
|
|
if (data->reg_temp[j][i]) {
|
|
err = nct6775_write_temp(data, data->reg_temp[j][i],
|
|
data->temp[j][i]);
|
|
if (err)
|
|
goto abort;
|
|
}
|
|
}
|
|
|
|
/* Restore other settings */
|
|
err = nct6775_write_value(data, data->REG_VBAT, data->vbat);
|
|
if (err)
|
|
goto abort;
|
|
if (data->kind == nct6775) {
|
|
err = nct6775_write_value(data, NCT6775_REG_FANDIV1, data->fandiv1);
|
|
if (err)
|
|
goto abort;
|
|
err = nct6775_write_value(data, NCT6775_REG_FANDIV2, data->fandiv2);
|
|
}
|
|
|
|
abort:
|
|
/* Force re-reading all values */
|
|
data->valid = false;
|
|
mutex_unlock(&data->update_lock);
|
|
|
|
return err;
|
|
}
|
|
|
|
static SIMPLE_DEV_PM_OPS(nct6775_dev_pm_ops, nct6775_suspend, nct6775_resume);
|
|
|
|
static void
|
|
nct6775_check_fan_inputs(struct nct6775_data *data, struct nct6775_sio_data *sio_data)
|
|
{
|
|
bool fan3pin = false, fan4pin = false, fan4min = false;
|
|
bool fan5pin = false, fan6pin = false, fan7pin = false;
|
|
bool pwm3pin = false, pwm4pin = false, pwm5pin = false;
|
|
bool pwm6pin = false, pwm7pin = false;
|
|
|
|
/* Store SIO_REG_ENABLE for use during resume */
|
|
sio_data->sio_select(sio_data, NCT6775_LD_HWM);
|
|
data->sio_reg_enable = sio_data->sio_inb(sio_data, SIO_REG_ENABLE);
|
|
|
|
/* fan4 and fan5 share some pins with the GPIO and serial flash */
|
|
if (data->kind == nct6775) {
|
|
int cr2c = sio_data->sio_inb(sio_data, 0x2c);
|
|
|
|
fan3pin = cr2c & BIT(6);
|
|
pwm3pin = cr2c & BIT(7);
|
|
|
|
/* On NCT6775, fan4 shares pins with the fdc interface */
|
|
fan4pin = !(sio_data->sio_inb(sio_data, 0x2A) & 0x80);
|
|
} else if (data->kind == nct6776) {
|
|
bool gpok = sio_data->sio_inb(sio_data, 0x27) & 0x80;
|
|
const char *board_vendor, *board_name;
|
|
|
|
board_vendor = dmi_get_system_info(DMI_BOARD_VENDOR);
|
|
board_name = dmi_get_system_info(DMI_BOARD_NAME);
|
|
|
|
if (board_name && board_vendor &&
|
|
!strcmp(board_vendor, "ASRock")) {
|
|
/*
|
|
* Auxiliary fan monitoring is not enabled on ASRock
|
|
* Z77 Pro4-M if booted in UEFI Ultra-FastBoot mode.
|
|
* Observed with BIOS version 2.00.
|
|
*/
|
|
if (!strcmp(board_name, "Z77 Pro4-M")) {
|
|
if ((data->sio_reg_enable & 0xe0) != 0xe0) {
|
|
data->sio_reg_enable |= 0xe0;
|
|
sio_data->sio_outb(sio_data, SIO_REG_ENABLE,
|
|
data->sio_reg_enable);
|
|
}
|
|
}
|
|
}
|
|
|
|
if (data->sio_reg_enable & 0x80)
|
|
fan3pin = gpok;
|
|
else
|
|
fan3pin = !(sio_data->sio_inb(sio_data, 0x24) & 0x40);
|
|
|
|
if (data->sio_reg_enable & 0x40)
|
|
fan4pin = gpok;
|
|
else
|
|
fan4pin = sio_data->sio_inb(sio_data, 0x1C) & 0x01;
|
|
|
|
if (data->sio_reg_enable & 0x20)
|
|
fan5pin = gpok;
|
|
else
|
|
fan5pin = sio_data->sio_inb(sio_data, 0x1C) & 0x02;
|
|
|
|
fan4min = fan4pin;
|
|
pwm3pin = fan3pin;
|
|
} else if (data->kind == nct6106) {
|
|
int cr24 = sio_data->sio_inb(sio_data, 0x24);
|
|
|
|
fan3pin = !(cr24 & 0x80);
|
|
pwm3pin = cr24 & 0x08;
|
|
} else if (data->kind == nct6116) {
|
|
int cr1a = sio_data->sio_inb(sio_data, 0x1a);
|
|
int cr1b = sio_data->sio_inb(sio_data, 0x1b);
|
|
int cr24 = sio_data->sio_inb(sio_data, 0x24);
|
|
int cr2a = sio_data->sio_inb(sio_data, 0x2a);
|
|
int cr2b = sio_data->sio_inb(sio_data, 0x2b);
|
|
int cr2f = sio_data->sio_inb(sio_data, 0x2f);
|
|
|
|
fan3pin = !(cr2b & 0x10);
|
|
fan4pin = (cr2b & 0x80) || // pin 1(2)
|
|
(!(cr2f & 0x10) && (cr1a & 0x04)); // pin 65(66)
|
|
fan5pin = (cr2b & 0x80) || // pin 126(127)
|
|
(!(cr1b & 0x03) && (cr2a & 0x02)); // pin 94(96)
|
|
|
|
pwm3pin = fan3pin && (cr24 & 0x08);
|
|
pwm4pin = fan4pin;
|
|
pwm5pin = fan5pin;
|
|
} else {
|
|
/*
|
|
* NCT6779D, NCT6791D, NCT6792D, NCT6793D, NCT6795D, NCT6796D,
|
|
* NCT6797D, NCT6798D
|
|
*/
|
|
int cr1a = sio_data->sio_inb(sio_data, 0x1a);
|
|
int cr1b = sio_data->sio_inb(sio_data, 0x1b);
|
|
int cr1c = sio_data->sio_inb(sio_data, 0x1c);
|
|
int cr1d = sio_data->sio_inb(sio_data, 0x1d);
|
|
int cr2a = sio_data->sio_inb(sio_data, 0x2a);
|
|
int cr2b = sio_data->sio_inb(sio_data, 0x2b);
|
|
int cr2d = sio_data->sio_inb(sio_data, 0x2d);
|
|
int cr2f = sio_data->sio_inb(sio_data, 0x2f);
|
|
bool dsw_en = cr2f & BIT(3);
|
|
bool ddr4_en = cr2f & BIT(4);
|
|
int cre0;
|
|
int creb;
|
|
int cred;
|
|
|
|
sio_data->sio_select(sio_data, NCT6775_LD_12);
|
|
cre0 = sio_data->sio_inb(sio_data, 0xe0);
|
|
creb = sio_data->sio_inb(sio_data, 0xeb);
|
|
cred = sio_data->sio_inb(sio_data, 0xed);
|
|
|
|
fan3pin = !(cr1c & BIT(5));
|
|
fan4pin = !(cr1c & BIT(6));
|
|
fan5pin = !(cr1c & BIT(7));
|
|
|
|
pwm3pin = !(cr1c & BIT(0));
|
|
pwm4pin = !(cr1c & BIT(1));
|
|
pwm5pin = !(cr1c & BIT(2));
|
|
|
|
switch (data->kind) {
|
|
case nct6791:
|
|
fan6pin = cr2d & BIT(1);
|
|
pwm6pin = cr2d & BIT(0);
|
|
break;
|
|
case nct6792:
|
|
fan6pin = !dsw_en && (cr2d & BIT(1));
|
|
pwm6pin = !dsw_en && (cr2d & BIT(0));
|
|
break;
|
|
case nct6793:
|
|
fan5pin |= cr1b & BIT(5);
|
|
fan5pin |= creb & BIT(5);
|
|
|
|
fan6pin = !dsw_en && (cr2d & BIT(1));
|
|
fan6pin |= creb & BIT(3);
|
|
|
|
pwm5pin |= cr2d & BIT(7);
|
|
pwm5pin |= (creb & BIT(4)) && !(cr2a & BIT(0));
|
|
|
|
pwm6pin = !dsw_en && (cr2d & BIT(0));
|
|
pwm6pin |= creb & BIT(2);
|
|
break;
|
|
case nct6795:
|
|
fan5pin |= cr1b & BIT(5);
|
|
fan5pin |= creb & BIT(5);
|
|
|
|
fan6pin = (cr2a & BIT(4)) &&
|
|
(!dsw_en || (cred & BIT(4)));
|
|
fan6pin |= creb & BIT(3);
|
|
|
|
pwm5pin |= cr2d & BIT(7);
|
|
pwm5pin |= (creb & BIT(4)) && !(cr2a & BIT(0));
|
|
|
|
pwm6pin = (cr2a & BIT(3)) && (cred & BIT(2));
|
|
pwm6pin |= creb & BIT(2);
|
|
break;
|
|
case nct6796:
|
|
fan5pin |= cr1b & BIT(5);
|
|
fan5pin |= (cre0 & BIT(3)) && !(cr1b & BIT(0));
|
|
fan5pin |= creb & BIT(5);
|
|
|
|
fan6pin = (cr2a & BIT(4)) &&
|
|
(!dsw_en || (cred & BIT(4)));
|
|
fan6pin |= creb & BIT(3);
|
|
|
|
fan7pin = !(cr2b & BIT(2));
|
|
|
|
pwm5pin |= cr2d & BIT(7);
|
|
pwm5pin |= (cre0 & BIT(4)) && !(cr1b & BIT(0));
|
|
pwm5pin |= (creb & BIT(4)) && !(cr2a & BIT(0));
|
|
|
|
pwm6pin = (cr2a & BIT(3)) && (cred & BIT(2));
|
|
pwm6pin |= creb & BIT(2);
|
|
|
|
pwm7pin = !(cr1d & (BIT(2) | BIT(3)));
|
|
break;
|
|
case nct6797:
|
|
fan5pin |= !ddr4_en && (cr1b & BIT(5));
|
|
fan5pin |= creb & BIT(5);
|
|
|
|
fan6pin = cr2a & BIT(4);
|
|
fan6pin |= creb & BIT(3);
|
|
|
|
fan7pin = cr1a & BIT(1);
|
|
|
|
pwm5pin |= (creb & BIT(4)) && !(cr2a & BIT(0));
|
|
pwm5pin |= !ddr4_en && (cr2d & BIT(7));
|
|
|
|
pwm6pin = creb & BIT(2);
|
|
pwm6pin |= cred & BIT(2);
|
|
|
|
pwm7pin = cr1d & BIT(4);
|
|
break;
|
|
case nct6798:
|
|
fan6pin = !(cr1b & BIT(0)) && (cre0 & BIT(3));
|
|
fan6pin |= cr2a & BIT(4);
|
|
fan6pin |= creb & BIT(5);
|
|
|
|
fan7pin = cr1b & BIT(5);
|
|
fan7pin |= !(cr2b & BIT(2));
|
|
fan7pin |= creb & BIT(3);
|
|
|
|
pwm6pin = !(cr1b & BIT(0)) && (cre0 & BIT(4));
|
|
pwm6pin |= !(cred & BIT(2)) && (cr2a & BIT(3));
|
|
pwm6pin |= (creb & BIT(4)) && !(cr2a & BIT(0));
|
|
|
|
pwm7pin = !(cr1d & (BIT(2) | BIT(3)));
|
|
pwm7pin |= cr2d & BIT(7);
|
|
pwm7pin |= creb & BIT(2);
|
|
break;
|
|
default: /* NCT6779D */
|
|
break;
|
|
}
|
|
|
|
fan4min = fan4pin;
|
|
}
|
|
|
|
/* fan 1 and 2 (0x03) are always present */
|
|
data->has_fan = 0x03 | (fan3pin << 2) | (fan4pin << 3) |
|
|
(fan5pin << 4) | (fan6pin << 5) | (fan7pin << 6);
|
|
data->has_fan_min = 0x03 | (fan3pin << 2) | (fan4min << 3) |
|
|
(fan5pin << 4) | (fan6pin << 5) | (fan7pin << 6);
|
|
data->has_pwm = 0x03 | (pwm3pin << 2) | (pwm4pin << 3) |
|
|
(pwm5pin << 4) | (pwm6pin << 5) | (pwm7pin << 6);
|
|
}
|
|
|
|
static ssize_t
|
|
cpu0_vid_show(struct device *dev, struct device_attribute *attr, char *buf)
|
|
{
|
|
struct nct6775_data *data = dev_get_drvdata(dev);
|
|
|
|
return sprintf(buf, "%d\n", vid_from_reg(data->vid, data->vrm));
|
|
}
|
|
|
|
static DEVICE_ATTR_RO(cpu0_vid);
|
|
|
|
/* Case open detection */
|
|
|
|
static const u8 NCT6775_REG_CR_CASEOPEN_CLR[] = { 0xe6, 0xee };
|
|
static const u8 NCT6775_CR_CASEOPEN_CLR_MASK[] = { 0x20, 0x01 };
|
|
|
|
static ssize_t
|
|
clear_caseopen(struct device *dev, struct device_attribute *attr,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct nct6775_data *data = dev_get_drvdata(dev);
|
|
struct nct6775_sio_data *sio_data = data->driver_data;
|
|
int nr = to_sensor_dev_attr(attr)->index - INTRUSION_ALARM_BASE;
|
|
unsigned long val;
|
|
u8 reg;
|
|
int ret;
|
|
|
|
if (kstrtoul(buf, 10, &val) || val != 0)
|
|
return -EINVAL;
|
|
|
|
mutex_lock(&data->update_lock);
|
|
|
|
/*
|
|
* Use CR registers to clear caseopen status.
|
|
* The CR registers are the same for all chips, and not all chips
|
|
* support clearing the caseopen status through "regular" registers.
|
|
*/
|
|
ret = sio_data->sio_enter(sio_data);
|
|
if (ret) {
|
|
count = ret;
|
|
goto error;
|
|
}
|
|
|
|
sio_data->sio_select(sio_data, NCT6775_LD_ACPI);
|
|
reg = sio_data->sio_inb(sio_data, NCT6775_REG_CR_CASEOPEN_CLR[nr]);
|
|
reg |= NCT6775_CR_CASEOPEN_CLR_MASK[nr];
|
|
sio_data->sio_outb(sio_data, NCT6775_REG_CR_CASEOPEN_CLR[nr], reg);
|
|
reg &= ~NCT6775_CR_CASEOPEN_CLR_MASK[nr];
|
|
sio_data->sio_outb(sio_data, NCT6775_REG_CR_CASEOPEN_CLR[nr], reg);
|
|
sio_data->sio_exit(sio_data);
|
|
|
|
data->valid = false; /* Force cache refresh */
|
|
error:
|
|
mutex_unlock(&data->update_lock);
|
|
return count;
|
|
}
|
|
|
|
static SENSOR_DEVICE_ATTR(intrusion0_alarm, 0644, nct6775_show_alarm,
|
|
clear_caseopen, INTRUSION_ALARM_BASE);
|
|
static SENSOR_DEVICE_ATTR(intrusion1_alarm, 0644, nct6775_show_alarm,
|
|
clear_caseopen, INTRUSION_ALARM_BASE + 1);
|
|
static SENSOR_DEVICE_ATTR(intrusion0_beep, 0644, nct6775_show_beep,
|
|
nct6775_store_beep, INTRUSION_ALARM_BASE);
|
|
static SENSOR_DEVICE_ATTR(intrusion1_beep, 0644, nct6775_show_beep,
|
|
nct6775_store_beep, INTRUSION_ALARM_BASE + 1);
|
|
static SENSOR_DEVICE_ATTR(beep_enable, 0644, nct6775_show_beep,
|
|
nct6775_store_beep, BEEP_ENABLE_BASE);
|
|
|
|
static umode_t nct6775_other_is_visible(struct kobject *kobj,
|
|
struct attribute *attr, int index)
|
|
{
|
|
struct device *dev = kobj_to_dev(kobj);
|
|
struct nct6775_data *data = dev_get_drvdata(dev);
|
|
|
|
if (index == 0 && !data->have_vid)
|
|
return 0;
|
|
|
|
if (index == 1 || index == 2) {
|
|
if (data->ALARM_BITS[INTRUSION_ALARM_BASE + index - 1] < 0)
|
|
return 0;
|
|
}
|
|
|
|
if (index == 3 || index == 4) {
|
|
if (data->BEEP_BITS[INTRUSION_ALARM_BASE + index - 3] < 0)
|
|
return 0;
|
|
}
|
|
|
|
return nct6775_attr_mode(data, attr);
|
|
}
|
|
|
|
/*
|
|
* nct6775_other_is_visible uses the index into the following array
|
|
* to determine if attributes should be created or not.
|
|
* Any change in order or content must be matched.
|
|
*/
|
|
static struct attribute *nct6775_attributes_other[] = {
|
|
&dev_attr_cpu0_vid.attr, /* 0 */
|
|
&sensor_dev_attr_intrusion0_alarm.dev_attr.attr, /* 1 */
|
|
&sensor_dev_attr_intrusion1_alarm.dev_attr.attr, /* 2 */
|
|
&sensor_dev_attr_intrusion0_beep.dev_attr.attr, /* 3 */
|
|
&sensor_dev_attr_intrusion1_beep.dev_attr.attr, /* 4 */
|
|
&sensor_dev_attr_beep_enable.dev_attr.attr, /* 5 */
|
|
|
|
NULL
|
|
};
|
|
|
|
static const struct attribute_group nct6775_group_other = {
|
|
.attrs = nct6775_attributes_other,
|
|
.is_visible = nct6775_other_is_visible,
|
|
};
|
|
|
|
static int nct6775_platform_probe_init(struct nct6775_data *data)
|
|
{
|
|
int err;
|
|
u8 cr2a;
|
|
struct nct6775_sio_data *sio_data = data->driver_data;
|
|
|
|
err = sio_data->sio_enter(sio_data);
|
|
if (err)
|
|
return err;
|
|
|
|
cr2a = sio_data->sio_inb(sio_data, 0x2a);
|
|
switch (data->kind) {
|
|
case nct6775:
|
|
data->have_vid = (cr2a & 0x40);
|
|
break;
|
|
case nct6776:
|
|
data->have_vid = (cr2a & 0x60) == 0x40;
|
|
break;
|
|
case nct6106:
|
|
case nct6116:
|
|
case nct6779:
|
|
case nct6791:
|
|
case nct6792:
|
|
case nct6793:
|
|
case nct6795:
|
|
case nct6796:
|
|
case nct6797:
|
|
case nct6798:
|
|
break;
|
|
}
|
|
|
|
/*
|
|
* Read VID value
|
|
* We can get the VID input values directly at logical device D 0xe3.
|
|
*/
|
|
if (data->have_vid) {
|
|
sio_data->sio_select(sio_data, NCT6775_LD_VID);
|
|
data->vid = sio_data->sio_inb(sio_data, 0xe3);
|
|
data->vrm = vid_which_vrm();
|
|
}
|
|
|
|
if (fan_debounce) {
|
|
u8 tmp;
|
|
|
|
sio_data->sio_select(sio_data, NCT6775_LD_HWM);
|
|
tmp = sio_data->sio_inb(sio_data,
|
|
NCT6775_REG_CR_FAN_DEBOUNCE);
|
|
switch (data->kind) {
|
|
case nct6106:
|
|
case nct6116:
|
|
tmp |= 0xe0;
|
|
break;
|
|
case nct6775:
|
|
tmp |= 0x1e;
|
|
break;
|
|
case nct6776:
|
|
case nct6779:
|
|
tmp |= 0x3e;
|
|
break;
|
|
case nct6791:
|
|
case nct6792:
|
|
case nct6793:
|
|
case nct6795:
|
|
case nct6796:
|
|
case nct6797:
|
|
case nct6798:
|
|
tmp |= 0x7e;
|
|
break;
|
|
}
|
|
sio_data->sio_outb(sio_data, NCT6775_REG_CR_FAN_DEBOUNCE,
|
|
tmp);
|
|
pr_info("Enabled fan debounce for chip %s\n", data->name);
|
|
}
|
|
|
|
nct6775_check_fan_inputs(data, sio_data);
|
|
|
|
sio_data->sio_exit(sio_data);
|
|
|
|
return nct6775_add_attr_group(data, &nct6775_group_other);
|
|
}
|
|
|
|
static const struct regmap_config nct6775_regmap_config = {
|
|
.reg_bits = 16,
|
|
.val_bits = 16,
|
|
.reg_read = nct6775_reg_read,
|
|
.reg_write = nct6775_reg_write,
|
|
};
|
|
|
|
static const struct regmap_config nct6775_wmi_regmap_config = {
|
|
.reg_bits = 16,
|
|
.val_bits = 16,
|
|
.reg_read = nct6775_wmi_reg_read,
|
|
.reg_write = nct6775_wmi_reg_write,
|
|
};
|
|
|
|
static int nct6775_platform_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct nct6775_sio_data *sio_data = dev_get_platdata(dev);
|
|
struct nct6775_data *data;
|
|
struct resource *res;
|
|
const struct regmap_config *regmapcfg;
|
|
|
|
if (sio_data->access == access_direct) {
|
|
res = platform_get_resource(pdev, IORESOURCE_IO, 0);
|
|
if (!devm_request_region(&pdev->dev, res->start, IOREGION_LENGTH, DRVNAME))
|
|
return -EBUSY;
|
|
}
|
|
|
|
data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
|
|
if (!data)
|
|
return -ENOMEM;
|
|
|
|
data->kind = sio_data->kind;
|
|
data->sioreg = sio_data->sioreg;
|
|
|
|
if (sio_data->access == access_direct) {
|
|
data->addr = res->start;
|
|
regmapcfg = &nct6775_regmap_config;
|
|
} else {
|
|
regmapcfg = &nct6775_wmi_regmap_config;
|
|
}
|
|
|
|
platform_set_drvdata(pdev, data);
|
|
|
|
data->driver_data = sio_data;
|
|
data->driver_init = nct6775_platform_probe_init;
|
|
|
|
return nct6775_probe(&pdev->dev, data, regmapcfg);
|
|
}
|
|
|
|
static struct platform_driver nct6775_driver = {
|
|
.driver = {
|
|
.name = DRVNAME,
|
|
.pm = &nct6775_dev_pm_ops,
|
|
},
|
|
.probe = nct6775_platform_probe,
|
|
};
|
|
|
|
/* nct6775_find() looks for a '627 in the Super-I/O config space */
|
|
static int __init nct6775_find(int sioaddr, struct nct6775_sio_data *sio_data)
|
|
{
|
|
u16 val;
|
|
int err;
|
|
int addr;
|
|
|
|
sio_data->access = access_direct;
|
|
sio_data->sioreg = sioaddr;
|
|
|
|
err = sio_data->sio_enter(sio_data);
|
|
if (err)
|
|
return err;
|
|
|
|
val = (sio_data->sio_inb(sio_data, SIO_REG_DEVID) << 8) |
|
|
sio_data->sio_inb(sio_data, SIO_REG_DEVID + 1);
|
|
if (force_id && val != 0xffff)
|
|
val = force_id;
|
|
|
|
switch (val & SIO_ID_MASK) {
|
|
case SIO_NCT6106_ID:
|
|
sio_data->kind = nct6106;
|
|
break;
|
|
case SIO_NCT6116_ID:
|
|
sio_data->kind = nct6116;
|
|
break;
|
|
case SIO_NCT6775_ID:
|
|
sio_data->kind = nct6775;
|
|
break;
|
|
case SIO_NCT6776_ID:
|
|
sio_data->kind = nct6776;
|
|
break;
|
|
case SIO_NCT6779_ID:
|
|
sio_data->kind = nct6779;
|
|
break;
|
|
case SIO_NCT6791_ID:
|
|
sio_data->kind = nct6791;
|
|
break;
|
|
case SIO_NCT6792_ID:
|
|
sio_data->kind = nct6792;
|
|
break;
|
|
case SIO_NCT6793_ID:
|
|
sio_data->kind = nct6793;
|
|
break;
|
|
case SIO_NCT6795_ID:
|
|
sio_data->kind = nct6795;
|
|
break;
|
|
case SIO_NCT6796_ID:
|
|
sio_data->kind = nct6796;
|
|
break;
|
|
case SIO_NCT6797_ID:
|
|
sio_data->kind = nct6797;
|
|
break;
|
|
case SIO_NCT6798_ID:
|
|
sio_data->kind = nct6798;
|
|
break;
|
|
default:
|
|
if (val != 0xffff)
|
|
pr_debug("unsupported chip ID: 0x%04x\n", val);
|
|
sio_data->sio_exit(sio_data);
|
|
return -ENODEV;
|
|
}
|
|
|
|
/* We have a known chip, find the HWM I/O address */
|
|
sio_data->sio_select(sio_data, NCT6775_LD_HWM);
|
|
val = (sio_data->sio_inb(sio_data, SIO_REG_ADDR) << 8)
|
|
| sio_data->sio_inb(sio_data, SIO_REG_ADDR + 1);
|
|
addr = val & IOREGION_ALIGNMENT;
|
|
if (addr == 0) {
|
|
pr_err("Refusing to enable a Super-I/O device with a base I/O port 0\n");
|
|
sio_data->sio_exit(sio_data);
|
|
return -ENODEV;
|
|
}
|
|
|
|
/* Activate logical device if needed */
|
|
val = sio_data->sio_inb(sio_data, SIO_REG_ENABLE);
|
|
if (!(val & 0x01)) {
|
|
pr_warn("Forcibly enabling Super-I/O. Sensor is probably unusable.\n");
|
|
sio_data->sio_outb(sio_data, SIO_REG_ENABLE, val | 0x01);
|
|
}
|
|
|
|
if (sio_data->kind == nct6791 || sio_data->kind == nct6792 ||
|
|
sio_data->kind == nct6793 || sio_data->kind == nct6795 ||
|
|
sio_data->kind == nct6796 || sio_data->kind == nct6797 ||
|
|
sio_data->kind == nct6798)
|
|
nct6791_enable_io_mapping(sio_data);
|
|
|
|
sio_data->sio_exit(sio_data);
|
|
pr_info("Found %s or compatible chip at %#x:%#x\n",
|
|
nct6775_sio_names[sio_data->kind], sioaddr, addr);
|
|
|
|
return addr;
|
|
}
|
|
|
|
/*
|
|
* when Super-I/O functions move to a separate file, the Super-I/O
|
|
* bus will manage the lifetime of the device and this module will only keep
|
|
* track of the nct6775 driver. But since we use platform_device_alloc(), we
|
|
* must keep track of the device
|
|
*/
|
|
static struct platform_device *pdev[2];
|
|
|
|
static const char * const asus_wmi_boards[] = {
|
|
"PRO H410T",
|
|
"ProArt X570-CREATOR WIFI",
|
|
"Pro B550M-C",
|
|
"Pro WS X570-ACE",
|
|
"PRIME B360-PLUS",
|
|
"PRIME B460-PLUS",
|
|
"PRIME B550-PLUS",
|
|
"PRIME B550M-A",
|
|
"PRIME B550M-A (WI-FI)",
|
|
"PRIME H410M-R",
|
|
"PRIME X570-P",
|
|
"PRIME X570-PRO",
|
|
"ROG CROSSHAIR VIII DARK HERO",
|
|
"ROG CROSSHAIR VIII FORMULA",
|
|
"ROG CROSSHAIR VIII HERO",
|
|
"ROG CROSSHAIR VIII IMPACT",
|
|
"ROG STRIX B550-A GAMING",
|
|
"ROG STRIX B550-E GAMING",
|
|
"ROG STRIX B550-F GAMING",
|
|
"ROG STRIX B550-F GAMING (WI-FI)",
|
|
"ROG STRIX B550-F GAMING WIFI II",
|
|
"ROG STRIX B550-I GAMING",
|
|
"ROG STRIX B550-XE GAMING (WI-FI)",
|
|
"ROG STRIX X570-E GAMING",
|
|
"ROG STRIX X570-E GAMING WIFI II",
|
|
"ROG STRIX X570-F GAMING",
|
|
"ROG STRIX X570-I GAMING",
|
|
"ROG STRIX Z390-E GAMING",
|
|
"ROG STRIX Z390-F GAMING",
|
|
"ROG STRIX Z390-H GAMING",
|
|
"ROG STRIX Z390-I GAMING",
|
|
"ROG STRIX Z490-A GAMING",
|
|
"ROG STRIX Z490-E GAMING",
|
|
"ROG STRIX Z490-F GAMING",
|
|
"ROG STRIX Z490-G GAMING",
|
|
"ROG STRIX Z490-G GAMING (WI-FI)",
|
|
"ROG STRIX Z490-H GAMING",
|
|
"ROG STRIX Z490-I GAMING",
|
|
"TUF GAMING B550M-PLUS",
|
|
"TUF GAMING B550M-PLUS (WI-FI)",
|
|
"TUF GAMING B550-PLUS",
|
|
"TUF GAMING B550-PRO",
|
|
"TUF GAMING X570-PLUS",
|
|
"TUF GAMING X570-PLUS (WI-FI)",
|
|
"TUF GAMING X570-PRO (WI-FI)",
|
|
"TUF GAMING Z490-PLUS",
|
|
"TUF GAMING Z490-PLUS (WI-FI)",
|
|
};
|
|
|
|
static int __init sensors_nct6775_platform_init(void)
|
|
{
|
|
int i, err;
|
|
bool found = false;
|
|
int address;
|
|
struct resource res;
|
|
struct nct6775_sio_data sio_data;
|
|
int sioaddr[2] = { 0x2e, 0x4e };
|
|
enum sensor_access access = access_direct;
|
|
const char *board_vendor, *board_name;
|
|
u8 tmp;
|
|
|
|
err = platform_driver_register(&nct6775_driver);
|
|
if (err)
|
|
return err;
|
|
|
|
board_vendor = dmi_get_system_info(DMI_BOARD_VENDOR);
|
|
board_name = dmi_get_system_info(DMI_BOARD_NAME);
|
|
|
|
if (board_name && board_vendor &&
|
|
!strcmp(board_vendor, "ASUSTeK COMPUTER INC.")) {
|
|
err = match_string(asus_wmi_boards, ARRAY_SIZE(asus_wmi_boards),
|
|
board_name);
|
|
if (err >= 0) {
|
|
/* if reading chip id via WMI succeeds, use WMI */
|
|
if (!nct6775_asuswmi_read(0, NCT6775_PORT_CHIPID, &tmp) && tmp) {
|
|
pr_info("Using Asus WMI to access %#x chip.\n", tmp);
|
|
access = access_asuswmi;
|
|
} else {
|
|
pr_err("Can't read ChipID by Asus WMI.\n");
|
|
}
|
|
}
|
|
}
|
|
|
|
/*
|
|
* initialize sio_data->kind and sio_data->sioreg.
|
|
*
|
|
* when Super-I/O functions move to a separate file, the Super-I/O
|
|
* driver will probe 0x2e and 0x4e and auto-detect the presence of a
|
|
* nct6775 hardware monitor, and call probe()
|
|
*/
|
|
for (i = 0; i < ARRAY_SIZE(pdev); i++) {
|
|
sio_data.sio_outb = superio_outb;
|
|
sio_data.sio_inb = superio_inb;
|
|
sio_data.sio_select = superio_select;
|
|
sio_data.sio_enter = superio_enter;
|
|
sio_data.sio_exit = superio_exit;
|
|
|
|
address = nct6775_find(sioaddr[i], &sio_data);
|
|
if (address <= 0)
|
|
continue;
|
|
|
|
found = true;
|
|
|
|
sio_data.access = access;
|
|
|
|
if (access == access_asuswmi) {
|
|
sio_data.sio_outb = superio_wmi_outb;
|
|
sio_data.sio_inb = superio_wmi_inb;
|
|
sio_data.sio_select = superio_wmi_select;
|
|
sio_data.sio_enter = superio_wmi_enter;
|
|
sio_data.sio_exit = superio_wmi_exit;
|
|
}
|
|
|
|
pdev[i] = platform_device_alloc(DRVNAME, address);
|
|
if (!pdev[i]) {
|
|
err = -ENOMEM;
|
|
goto exit_device_unregister;
|
|
}
|
|
|
|
err = platform_device_add_data(pdev[i], &sio_data,
|
|
sizeof(struct nct6775_sio_data));
|
|
if (err)
|
|
goto exit_device_put;
|
|
|
|
if (sio_data.access == access_direct) {
|
|
memset(&res, 0, sizeof(res));
|
|
res.name = DRVNAME;
|
|
res.start = address + IOREGION_OFFSET;
|
|
res.end = address + IOREGION_OFFSET + IOREGION_LENGTH - 1;
|
|
res.flags = IORESOURCE_IO;
|
|
|
|
err = acpi_check_resource_conflict(&res);
|
|
if (err) {
|
|
platform_device_put(pdev[i]);
|
|
pdev[i] = NULL;
|
|
continue;
|
|
}
|
|
|
|
err = platform_device_add_resources(pdev[i], &res, 1);
|
|
if (err)
|
|
goto exit_device_put;
|
|
}
|
|
|
|
/* platform_device_add calls probe() */
|
|
err = platform_device_add(pdev[i]);
|
|
if (err)
|
|
goto exit_device_put;
|
|
}
|
|
if (!found) {
|
|
err = -ENODEV;
|
|
goto exit_unregister;
|
|
}
|
|
|
|
return 0;
|
|
|
|
exit_device_put:
|
|
platform_device_put(pdev[i]);
|
|
exit_device_unregister:
|
|
while (--i >= 0) {
|
|
if (pdev[i])
|
|
platform_device_unregister(pdev[i]);
|
|
}
|
|
exit_unregister:
|
|
platform_driver_unregister(&nct6775_driver);
|
|
return err;
|
|
}
|
|
|
|
static void __exit sensors_nct6775_platform_exit(void)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(pdev); i++) {
|
|
if (pdev[i])
|
|
platform_device_unregister(pdev[i]);
|
|
}
|
|
platform_driver_unregister(&nct6775_driver);
|
|
}
|
|
|
|
MODULE_AUTHOR("Guenter Roeck <linux@roeck-us.net>");
|
|
MODULE_DESCRIPTION("Platform driver for NCT6775F and compatible chips");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_IMPORT_NS(HWMON_NCT6775);
|
|
|
|
module_init(sensors_nct6775_platform_init);
|
|
module_exit(sensors_nct6775_platform_exit);
|