302 lines
7.0 KiB
C
302 lines
7.0 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* pata_cs5536.c - CS5536 PATA for new ATA layer
|
|
* (C) 2007 Martin K. Petersen <mkp@mkp.net>
|
|
* (C) 2011 Bartlomiej Zolnierkiewicz
|
|
*
|
|
* Documentation:
|
|
* Available from AMD web site.
|
|
*
|
|
* The IDE timing registers for the CS5536 live in the Geode Machine
|
|
* Specific Register file and not PCI config space. Most BIOSes
|
|
* virtualize the PCI registers so the chip looks like a standard IDE
|
|
* controller. Unfortunately not all implementations get this right.
|
|
* In particular some have problems with unaligned accesses to the
|
|
* virtualized PCI registers. This driver always does full dword
|
|
* writes to work around the issue. Also, in case of a bad BIOS this
|
|
* driver can be loaded with the "msr=1" parameter which forces using
|
|
* the Machine Specific Registers to configure the device.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/blkdev.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/libata.h>
|
|
#include <scsi/scsi_host.h>
|
|
#include <linux/dmi.h>
|
|
|
|
#ifdef CONFIG_X86_32
|
|
#include <asm/msr.h>
|
|
static int use_msr;
|
|
module_param_named(msr, use_msr, int, 0644);
|
|
MODULE_PARM_DESC(msr, "Force using MSR to configure IDE function (Default: 0)");
|
|
#else
|
|
#undef rdmsr /* avoid accidental MSR usage on, e.g. x86-64 */
|
|
#undef wrmsr
|
|
#define rdmsr(x, y, z) do { } while (0)
|
|
#define wrmsr(x, y, z) do { } while (0)
|
|
#define use_msr 0
|
|
#endif
|
|
|
|
#define DRV_NAME "pata_cs5536"
|
|
#define DRV_VERSION "0.0.8"
|
|
|
|
enum {
|
|
MSR_IDE_CFG = 0x51300010,
|
|
PCI_IDE_CFG = 0x40,
|
|
|
|
CFG = 0,
|
|
DTC = 2,
|
|
CAST = 3,
|
|
ETC = 4,
|
|
|
|
IDE_CFG_CHANEN = (1 << 1),
|
|
IDE_CFG_CABLE = (1 << 17) | (1 << 16),
|
|
|
|
IDE_D0_SHIFT = 24,
|
|
IDE_D1_SHIFT = 16,
|
|
IDE_DRV_MASK = 0xff,
|
|
|
|
IDE_CAST_D0_SHIFT = 6,
|
|
IDE_CAST_D1_SHIFT = 4,
|
|
IDE_CAST_DRV_MASK = 0x3,
|
|
IDE_CAST_CMD_MASK = 0xff,
|
|
IDE_CAST_CMD_SHIFT = 24,
|
|
|
|
IDE_ETC_UDMA_MASK = 0xc0,
|
|
};
|
|
|
|
/* Some Bachmann OT200 devices have a non working UDMA support due a
|
|
* missing resistor.
|
|
*/
|
|
static const struct dmi_system_id udma_quirk_dmi_table[] = {
|
|
{
|
|
.ident = "Bachmann electronic OT200",
|
|
.matches = {
|
|
DMI_MATCH(DMI_SYS_VENDOR, "Bachmann electronic"),
|
|
DMI_MATCH(DMI_PRODUCT_NAME, "OT200"),
|
|
DMI_MATCH(DMI_PRODUCT_VERSION, "1")
|
|
},
|
|
},
|
|
{ }
|
|
};
|
|
|
|
static int cs5536_read(struct pci_dev *pdev, int reg, u32 *val)
|
|
{
|
|
if (unlikely(use_msr)) {
|
|
u32 dummy __maybe_unused;
|
|
|
|
rdmsr(MSR_IDE_CFG + reg, *val, dummy);
|
|
return 0;
|
|
}
|
|
|
|
return pci_read_config_dword(pdev, PCI_IDE_CFG + reg * 4, val);
|
|
}
|
|
|
|
static int cs5536_write(struct pci_dev *pdev, int reg, int val)
|
|
{
|
|
if (unlikely(use_msr)) {
|
|
wrmsr(MSR_IDE_CFG + reg, val, 0);
|
|
return 0;
|
|
}
|
|
|
|
return pci_write_config_dword(pdev, PCI_IDE_CFG + reg * 4, val);
|
|
}
|
|
|
|
static void cs5536_program_dtc(struct ata_device *adev, u8 tim)
|
|
{
|
|
struct pci_dev *pdev = to_pci_dev(adev->link->ap->host->dev);
|
|
int dshift = adev->devno ? IDE_D1_SHIFT : IDE_D0_SHIFT;
|
|
u32 dtc;
|
|
|
|
cs5536_read(pdev, DTC, &dtc);
|
|
dtc &= ~(IDE_DRV_MASK << dshift);
|
|
dtc |= tim << dshift;
|
|
cs5536_write(pdev, DTC, dtc);
|
|
}
|
|
|
|
/**
|
|
* cs5536_cable_detect - detect cable type
|
|
* @ap: Port to detect on
|
|
*
|
|
* Perform cable detection for ATA66 capable cable.
|
|
*
|
|
* Returns a cable type.
|
|
*/
|
|
|
|
static int cs5536_cable_detect(struct ata_port *ap)
|
|
{
|
|
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
|
|
u32 cfg;
|
|
|
|
cs5536_read(pdev, CFG, &cfg);
|
|
|
|
if (cfg & IDE_CFG_CABLE)
|
|
return ATA_CBL_PATA80;
|
|
else
|
|
return ATA_CBL_PATA40;
|
|
}
|
|
|
|
/**
|
|
* cs5536_set_piomode - PIO setup
|
|
* @ap: ATA interface
|
|
* @adev: device on the interface
|
|
*/
|
|
|
|
static void cs5536_set_piomode(struct ata_port *ap, struct ata_device *adev)
|
|
{
|
|
static const u8 drv_timings[5] = {
|
|
0x98, 0x55, 0x32, 0x21, 0x20,
|
|
};
|
|
|
|
static const u8 addr_timings[5] = {
|
|
0x2, 0x1, 0x0, 0x0, 0x0,
|
|
};
|
|
|
|
static const u8 cmd_timings[5] = {
|
|
0x99, 0x92, 0x90, 0x22, 0x20,
|
|
};
|
|
|
|
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
|
|
struct ata_device *pair = ata_dev_pair(adev);
|
|
int mode = adev->pio_mode - XFER_PIO_0;
|
|
int cmdmode = mode;
|
|
int cshift = adev->devno ? IDE_CAST_D1_SHIFT : IDE_CAST_D0_SHIFT;
|
|
u32 cast;
|
|
|
|
if (pair)
|
|
cmdmode = min(mode, pair->pio_mode - XFER_PIO_0);
|
|
|
|
cs5536_program_dtc(adev, drv_timings[mode]);
|
|
|
|
cs5536_read(pdev, CAST, &cast);
|
|
|
|
cast &= ~(IDE_CAST_DRV_MASK << cshift);
|
|
cast |= addr_timings[mode] << cshift;
|
|
|
|
cast &= ~(IDE_CAST_CMD_MASK << IDE_CAST_CMD_SHIFT);
|
|
cast |= cmd_timings[cmdmode] << IDE_CAST_CMD_SHIFT;
|
|
|
|
cs5536_write(pdev, CAST, cast);
|
|
}
|
|
|
|
/**
|
|
* cs5536_set_dmamode - DMA timing setup
|
|
* @ap: ATA interface
|
|
* @adev: Device being configured
|
|
*
|
|
*/
|
|
|
|
static void cs5536_set_dmamode(struct ata_port *ap, struct ata_device *adev)
|
|
{
|
|
static const u8 udma_timings[6] = {
|
|
0xc2, 0xc1, 0xc0, 0xc4, 0xc5, 0xc6,
|
|
};
|
|
|
|
static const u8 mwdma_timings[3] = {
|
|
0x67, 0x21, 0x20,
|
|
};
|
|
|
|
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
|
|
u32 etc;
|
|
int mode = adev->dma_mode;
|
|
int dshift = adev->devno ? IDE_D1_SHIFT : IDE_D0_SHIFT;
|
|
|
|
cs5536_read(pdev, ETC, &etc);
|
|
|
|
if (mode >= XFER_UDMA_0) {
|
|
etc &= ~(IDE_DRV_MASK << dshift);
|
|
etc |= udma_timings[mode - XFER_UDMA_0] << dshift;
|
|
} else { /* MWDMA */
|
|
etc &= ~(IDE_ETC_UDMA_MASK << dshift);
|
|
cs5536_program_dtc(adev, mwdma_timings[mode - XFER_MW_DMA_0]);
|
|
}
|
|
|
|
cs5536_write(pdev, ETC, etc);
|
|
}
|
|
|
|
static struct scsi_host_template cs5536_sht = {
|
|
ATA_BMDMA_SHT(DRV_NAME),
|
|
};
|
|
|
|
static struct ata_port_operations cs5536_port_ops = {
|
|
.inherits = &ata_bmdma32_port_ops,
|
|
.cable_detect = cs5536_cable_detect,
|
|
.set_piomode = cs5536_set_piomode,
|
|
.set_dmamode = cs5536_set_dmamode,
|
|
};
|
|
|
|
/**
|
|
* cs5536_init_one
|
|
* @dev: PCI device
|
|
* @id: Entry in match table
|
|
*
|
|
*/
|
|
|
|
static int cs5536_init_one(struct pci_dev *dev, const struct pci_device_id *id)
|
|
{
|
|
static const struct ata_port_info info = {
|
|
.flags = ATA_FLAG_SLAVE_POSS,
|
|
.pio_mask = ATA_PIO4,
|
|
.mwdma_mask = ATA_MWDMA2,
|
|
.udma_mask = ATA_UDMA5,
|
|
.port_ops = &cs5536_port_ops,
|
|
};
|
|
|
|
static const struct ata_port_info no_udma_info = {
|
|
.flags = ATA_FLAG_SLAVE_POSS,
|
|
.pio_mask = ATA_PIO4,
|
|
.port_ops = &cs5536_port_ops,
|
|
};
|
|
|
|
|
|
const struct ata_port_info *ppi[2];
|
|
u32 cfg;
|
|
|
|
if (dmi_check_system(udma_quirk_dmi_table))
|
|
ppi[0] = &no_udma_info;
|
|
else
|
|
ppi[0] = &info;
|
|
|
|
ppi[1] = &ata_dummy_port_info;
|
|
|
|
if (use_msr)
|
|
dev_err(&dev->dev, DRV_NAME ": Using MSR regs instead of PCI\n");
|
|
|
|
cs5536_read(dev, CFG, &cfg);
|
|
|
|
if ((cfg & IDE_CFG_CHANEN) == 0) {
|
|
dev_err(&dev->dev, DRV_NAME ": disabled by BIOS\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
return ata_pci_bmdma_init_one(dev, ppi, &cs5536_sht, NULL, 0);
|
|
}
|
|
|
|
static const struct pci_device_id cs5536[] = {
|
|
{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_CS5536_IDE), },
|
|
{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_CS5536_DEV_IDE), },
|
|
{ },
|
|
};
|
|
|
|
static struct pci_driver cs5536_pci_driver = {
|
|
.name = DRV_NAME,
|
|
.id_table = cs5536,
|
|
.probe = cs5536_init_one,
|
|
.remove = ata_pci_remove_one,
|
|
#ifdef CONFIG_PM_SLEEP
|
|
.suspend = ata_pci_device_suspend,
|
|
.resume = ata_pci_device_resume,
|
|
#endif
|
|
};
|
|
|
|
module_pci_driver(cs5536_pci_driver);
|
|
|
|
MODULE_AUTHOR("Martin K. Petersen");
|
|
MODULE_DESCRIPTION("low-level driver for the CS5536 IDE controller");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_DEVICE_TABLE(pci, cs5536);
|
|
MODULE_VERSION(DRV_VERSION);
|