645 lines
14 KiB
C
645 lines
14 KiB
C
/*
|
|
* linux/arch/arm/mach-pxa/cm-x270.c
|
|
*
|
|
* Copyright (C) 2007 CompuLab, Ltd.
|
|
* Mike Rapoport <mike@compulab.co.il>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/types.h>
|
|
#include <linux/pm.h>
|
|
#include <linux/fb.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/sysdev.h>
|
|
#include <linux/io.h>
|
|
#include <linux/delay.h>
|
|
|
|
#include <linux/dm9000.h>
|
|
#include <linux/rtc-v3020.h>
|
|
#include <linux/serial_8250.h>
|
|
|
|
#include <video/mbxfb.h>
|
|
|
|
#include <asm/mach/arch.h>
|
|
#include <asm/mach-types.h>
|
|
#include <asm/mach/map.h>
|
|
|
|
#include <asm/arch/pxa-regs.h>
|
|
#include <asm/arch/pxa2xx-regs.h>
|
|
#include <asm/arch/pxa2xx-gpio.h>
|
|
#include <asm/arch/pxafb.h>
|
|
#include <asm/arch/ohci.h>
|
|
#include <asm/arch/mmc.h>
|
|
#include <asm/arch/bitfield.h>
|
|
#include <asm/arch/cm-x270.h>
|
|
|
|
#include <asm/hardware/it8152.h>
|
|
|
|
#include "generic.h"
|
|
#include "cm-x270-pci.h"
|
|
|
|
#define RTC_PHYS_BASE (PXA_CS1_PHYS + (5 << 22))
|
|
#define DM9000_PHYS_BASE (PXA_CS1_PHYS + (6 << 22))
|
|
|
|
static struct resource cmx270_dm9k_resource[] = {
|
|
[0] = {
|
|
.start = DM9000_PHYS_BASE,
|
|
.end = DM9000_PHYS_BASE + 4,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = DM9000_PHYS_BASE + 8,
|
|
.end = DM9000_PHYS_BASE + 8 + 500,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[2] = {
|
|
.start = CMX270_ETHIRQ,
|
|
.end = CMX270_ETHIRQ,
|
|
.flags = IORESOURCE_IRQ,
|
|
}
|
|
};
|
|
|
|
/* for the moment we limit ourselves to 32bit IO until some
|
|
* better IO routines can be written and tested
|
|
*/
|
|
static struct dm9000_plat_data cmx270_dm9k_platdata = {
|
|
.flags = DM9000_PLATF_32BITONLY,
|
|
};
|
|
|
|
/* Ethernet device */
|
|
static struct platform_device cmx270_device_dm9k = {
|
|
.name = "dm9000",
|
|
.id = 0,
|
|
.num_resources = ARRAY_SIZE(cmx270_dm9k_resource),
|
|
.resource = cmx270_dm9k_resource,
|
|
.dev = {
|
|
.platform_data = &cmx270_dm9k_platdata,
|
|
}
|
|
};
|
|
|
|
/* audio device */
|
|
static struct platform_device cmx270_audio_device = {
|
|
.name = "pxa2xx-ac97",
|
|
.id = -1,
|
|
};
|
|
|
|
/* touchscreen controller */
|
|
static struct platform_device cmx270_ts_device = {
|
|
.name = "ucb1400_ts",
|
|
.id = -1,
|
|
};
|
|
|
|
/* RTC */
|
|
static struct resource cmx270_v3020_resource[] = {
|
|
[0] = {
|
|
.start = RTC_PHYS_BASE,
|
|
.end = RTC_PHYS_BASE + 4,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
};
|
|
|
|
struct v3020_platform_data cmx270_v3020_pdata = {
|
|
.leftshift = 16,
|
|
};
|
|
|
|
static struct platform_device cmx270_rtc_device = {
|
|
.name = "v3020",
|
|
.num_resources = ARRAY_SIZE(cmx270_v3020_resource),
|
|
.resource = cmx270_v3020_resource,
|
|
.id = -1,
|
|
.dev = {
|
|
.platform_data = &cmx270_v3020_pdata,
|
|
}
|
|
};
|
|
|
|
/*
|
|
* CM-X270 LEDs
|
|
*/
|
|
static struct platform_device cmx270_led_device = {
|
|
.name = "cm-x270-led",
|
|
.id = -1,
|
|
};
|
|
|
|
/* 2700G graphics */
|
|
static u64 fb_dma_mask = ~(u64)0;
|
|
|
|
static struct resource cmx270_2700G_resource[] = {
|
|
/* frame buffer memory including ODFB and External SDRAM */
|
|
[0] = {
|
|
.start = MARATHON_PHYS,
|
|
.end = MARATHON_PHYS + 0x02000000,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
/* Marathon registers */
|
|
[1] = {
|
|
.start = MARATHON_PHYS + 0x03fe0000,
|
|
.end = MARATHON_PHYS + 0x03ffffff,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
};
|
|
|
|
static unsigned long save_lcd_regs[10];
|
|
|
|
static int cmx270_marathon_probe(struct fb_info *fb)
|
|
{
|
|
/* save PXA-270 pin settings before enabling 2700G */
|
|
save_lcd_regs[0] = GPDR1;
|
|
save_lcd_regs[1] = GPDR2;
|
|
save_lcd_regs[2] = GAFR1_U;
|
|
save_lcd_regs[3] = GAFR2_L;
|
|
save_lcd_regs[4] = GAFR2_U;
|
|
|
|
/* Disable PXA-270 on-chip controller driving pins */
|
|
GPDR1 &= ~(0xfc000000);
|
|
GPDR2 &= ~(0x00c03fff);
|
|
GAFR1_U &= ~(0xfff00000);
|
|
GAFR2_L &= ~(0x0fffffff);
|
|
GAFR2_U &= ~(0x0000f000);
|
|
return 0;
|
|
}
|
|
|
|
static int cmx270_marathon_remove(struct fb_info *fb)
|
|
{
|
|
GPDR1 = save_lcd_regs[0];
|
|
GPDR2 = save_lcd_regs[1];
|
|
GAFR1_U = save_lcd_regs[2];
|
|
GAFR2_L = save_lcd_regs[3];
|
|
GAFR2_U = save_lcd_regs[4];
|
|
return 0;
|
|
}
|
|
|
|
static struct mbxfb_platform_data cmx270_2700G_data = {
|
|
.xres = {
|
|
.min = 240,
|
|
.max = 1200,
|
|
.defval = 640,
|
|
},
|
|
.yres = {
|
|
.min = 240,
|
|
.max = 1200,
|
|
.defval = 480,
|
|
},
|
|
.bpp = {
|
|
.min = 16,
|
|
.max = 32,
|
|
.defval = 16,
|
|
},
|
|
.memsize = 8*1024*1024,
|
|
.probe = cmx270_marathon_probe,
|
|
.remove = cmx270_marathon_remove,
|
|
};
|
|
|
|
static struct platform_device cmx270_2700G = {
|
|
.name = "mbx-fb",
|
|
.dev = {
|
|
.platform_data = &cmx270_2700G_data,
|
|
.dma_mask = &fb_dma_mask,
|
|
.coherent_dma_mask = 0xffffffff,
|
|
},
|
|
.num_resources = ARRAY_SIZE(cmx270_2700G_resource),
|
|
.resource = cmx270_2700G_resource,
|
|
.id = -1,
|
|
};
|
|
|
|
static u64 ata_dma_mask = ~(u64)0;
|
|
|
|
static struct platform_device cmx270_ata = {
|
|
.name = "pata_cm_x270",
|
|
.id = -1,
|
|
.dev = {
|
|
.dma_mask = &ata_dma_mask,
|
|
.coherent_dma_mask = 0xffffffff,
|
|
},
|
|
};
|
|
|
|
/* platform devices */
|
|
static struct platform_device *platform_devices[] __initdata = {
|
|
&cmx270_device_dm9k,
|
|
&cmx270_audio_device,
|
|
&cmx270_rtc_device,
|
|
&cmx270_2700G,
|
|
&cmx270_led_device,
|
|
&cmx270_ts_device,
|
|
&cmx270_ata,
|
|
};
|
|
|
|
/* Map PCI companion and IDE/General Purpose CS statically */
|
|
static struct map_desc cmx270_io_desc[] __initdata = {
|
|
[0] = { /* IDE/general purpose space */
|
|
.virtual = CMX270_IDE104_VIRT,
|
|
.pfn = __phys_to_pfn(CMX270_IDE104_PHYS),
|
|
.length = SZ_64M - SZ_8M,
|
|
.type = MT_DEVICE
|
|
},
|
|
[1] = { /* PCI bridge */
|
|
.virtual = CMX270_IT8152_VIRT,
|
|
.pfn = __phys_to_pfn(CMX270_IT8152_PHYS),
|
|
.length = SZ_64M,
|
|
.type = MT_DEVICE
|
|
},
|
|
};
|
|
|
|
/*
|
|
Display definitions
|
|
keep these for backwards compatibility, although symbolic names (as
|
|
e.g. in lpd270.c) looks better
|
|
*/
|
|
#define MTYPE_STN320x240 0
|
|
#define MTYPE_TFT640x480 1
|
|
#define MTYPE_CRT640x480 2
|
|
#define MTYPE_CRT800x600 3
|
|
#define MTYPE_TFT320x240 6
|
|
#define MTYPE_STN640x480 7
|
|
|
|
static struct pxafb_mode_info generic_stn_320x240_mode = {
|
|
.pixclock = 76923,
|
|
.bpp = 8,
|
|
.xres = 320,
|
|
.yres = 240,
|
|
.hsync_len = 3,
|
|
.vsync_len = 2,
|
|
.left_margin = 3,
|
|
.upper_margin = 0,
|
|
.right_margin = 3,
|
|
.lower_margin = 0,
|
|
.sync = (FB_SYNC_HOR_HIGH_ACT |
|
|
FB_SYNC_VERT_HIGH_ACT),
|
|
.cmap_greyscale = 0,
|
|
};
|
|
|
|
static struct pxafb_mach_info generic_stn_320x240 = {
|
|
.modes = &generic_stn_320x240_mode,
|
|
.num_modes = 1,
|
|
.lccr0 = 0,
|
|
.lccr3 = (LCCR3_PixClkDiv(0x03) |
|
|
LCCR3_Acb(0xff) |
|
|
LCCR3_PCP),
|
|
.cmap_inverse = 0,
|
|
.cmap_static = 0,
|
|
};
|
|
|
|
static struct pxafb_mode_info generic_tft_640x480_mode = {
|
|
.pixclock = 38461,
|
|
.bpp = 8,
|
|
.xres = 640,
|
|
.yres = 480,
|
|
.hsync_len = 60,
|
|
.vsync_len = 2,
|
|
.left_margin = 70,
|
|
.upper_margin = 10,
|
|
.right_margin = 70,
|
|
.lower_margin = 5,
|
|
.sync = 0,
|
|
.cmap_greyscale = 0,
|
|
};
|
|
|
|
static struct pxafb_mach_info generic_tft_640x480 = {
|
|
.modes = &generic_tft_640x480_mode,
|
|
.num_modes = 1,
|
|
.lccr0 = (LCCR0_PAS),
|
|
.lccr3 = (LCCR3_PixClkDiv(0x01) |
|
|
LCCR3_Acb(0xff) |
|
|
LCCR3_PCP),
|
|
.cmap_inverse = 0,
|
|
.cmap_static = 0,
|
|
};
|
|
|
|
static struct pxafb_mode_info generic_crt_640x480_mode = {
|
|
.pixclock = 38461,
|
|
.bpp = 8,
|
|
.xres = 640,
|
|
.yres = 480,
|
|
.hsync_len = 63,
|
|
.vsync_len = 2,
|
|
.left_margin = 81,
|
|
.upper_margin = 33,
|
|
.right_margin = 16,
|
|
.lower_margin = 10,
|
|
.sync = (FB_SYNC_HOR_HIGH_ACT |
|
|
FB_SYNC_VERT_HIGH_ACT),
|
|
.cmap_greyscale = 0,
|
|
};
|
|
|
|
static struct pxafb_mach_info generic_crt_640x480 = {
|
|
.modes = &generic_crt_640x480_mode,
|
|
.num_modes = 1,
|
|
.lccr0 = (LCCR0_PAS),
|
|
.lccr3 = (LCCR3_PixClkDiv(0x01) |
|
|
LCCR3_Acb(0xff)),
|
|
.cmap_inverse = 0,
|
|
.cmap_static = 0,
|
|
};
|
|
|
|
static struct pxafb_mode_info generic_crt_800x600_mode = {
|
|
.pixclock = 28846,
|
|
.bpp = 8,
|
|
.xres = 800,
|
|
.yres = 600,
|
|
.hsync_len = 63,
|
|
.vsync_len = 2,
|
|
.left_margin = 26,
|
|
.upper_margin = 21,
|
|
.right_margin = 26,
|
|
.lower_margin = 11,
|
|
.sync = (FB_SYNC_HOR_HIGH_ACT |
|
|
FB_SYNC_VERT_HIGH_ACT),
|
|
.cmap_greyscale = 0,
|
|
};
|
|
|
|
static struct pxafb_mach_info generic_crt_800x600 = {
|
|
.modes = &generic_crt_800x600_mode,
|
|
.num_modes = 1,
|
|
.lccr0 = (LCCR0_PAS),
|
|
.lccr3 = (LCCR3_PixClkDiv(0x02) |
|
|
LCCR3_Acb(0xff)),
|
|
.cmap_inverse = 0,
|
|
.cmap_static = 0,
|
|
};
|
|
|
|
static struct pxafb_mode_info generic_tft_320x240_mode = {
|
|
.pixclock = 134615,
|
|
.bpp = 16,
|
|
.xres = 320,
|
|
.yres = 240,
|
|
.hsync_len = 63,
|
|
.vsync_len = 7,
|
|
.left_margin = 75,
|
|
.upper_margin = 0,
|
|
.right_margin = 15,
|
|
.lower_margin = 15,
|
|
.sync = 0,
|
|
.cmap_greyscale = 0,
|
|
};
|
|
|
|
static struct pxafb_mach_info generic_tft_320x240 = {
|
|
.modes = &generic_tft_320x240_mode,
|
|
.num_modes = 1,
|
|
.lccr0 = (LCCR0_PAS),
|
|
.lccr3 = (LCCR3_PixClkDiv(0x06) |
|
|
LCCR3_Acb(0xff) |
|
|
LCCR3_PCP),
|
|
.cmap_inverse = 0,
|
|
.cmap_static = 0,
|
|
};
|
|
|
|
static struct pxafb_mode_info generic_stn_640x480_mode = {
|
|
.pixclock = 57692,
|
|
.bpp = 8,
|
|
.xres = 640,
|
|
.yres = 480,
|
|
.hsync_len = 4,
|
|
.vsync_len = 2,
|
|
.left_margin = 10,
|
|
.upper_margin = 5,
|
|
.right_margin = 10,
|
|
.lower_margin = 5,
|
|
.sync = (FB_SYNC_HOR_HIGH_ACT |
|
|
FB_SYNC_VERT_HIGH_ACT),
|
|
.cmap_greyscale = 0,
|
|
};
|
|
|
|
static struct pxafb_mach_info generic_stn_640x480 = {
|
|
.modes = &generic_stn_640x480_mode,
|
|
.num_modes = 1,
|
|
.lccr0 = 0,
|
|
.lccr3 = (LCCR3_PixClkDiv(0x02) |
|
|
LCCR3_Acb(0xff)),
|
|
.cmap_inverse = 0,
|
|
.cmap_static = 0,
|
|
};
|
|
|
|
static struct pxafb_mach_info *cmx270_display = &generic_crt_640x480;
|
|
|
|
static int __init cmx270_set_display(char *str)
|
|
{
|
|
int disp_type = simple_strtol(str, NULL, 0);
|
|
switch (disp_type) {
|
|
case MTYPE_STN320x240:
|
|
cmx270_display = &generic_stn_320x240;
|
|
break;
|
|
case MTYPE_TFT640x480:
|
|
cmx270_display = &generic_tft_640x480;
|
|
break;
|
|
case MTYPE_CRT640x480:
|
|
cmx270_display = &generic_crt_640x480;
|
|
break;
|
|
case MTYPE_CRT800x600:
|
|
cmx270_display = &generic_crt_800x600;
|
|
break;
|
|
case MTYPE_TFT320x240:
|
|
cmx270_display = &generic_tft_320x240;
|
|
break;
|
|
case MTYPE_STN640x480:
|
|
cmx270_display = &generic_stn_640x480;
|
|
break;
|
|
default: /* fallback to CRT 640x480 */
|
|
cmx270_display = &generic_crt_640x480;
|
|
break;
|
|
}
|
|
return 1;
|
|
}
|
|
|
|
/*
|
|
This should be done really early to get proper configuration for
|
|
frame buffer.
|
|
Indeed, pxafb parameters can be used istead, but CM-X270 bootloader
|
|
has limitied line length for kernel command line, and also it will
|
|
break compatibitlty with proprietary releases already in field.
|
|
*/
|
|
__setup("monitor=", cmx270_set_display);
|
|
|
|
/* PXA27x OHCI controller setup */
|
|
static int cmx270_ohci_init(struct device *dev)
|
|
{
|
|
/* Set the Power Control Polarity Low */
|
|
UHCHR = (UHCHR | UHCHR_PCPL) &
|
|
~(UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSE);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct pxaohci_platform_data cmx270_ohci_platform_data = {
|
|
.port_mode = PMM_PERPORT_MODE,
|
|
.init = cmx270_ohci_init,
|
|
};
|
|
|
|
|
|
static int cmx270_mci_init(struct device *dev,
|
|
irq_handler_t cmx270_detect_int,
|
|
void *data)
|
|
{
|
|
int err;
|
|
|
|
/*
|
|
* setup GPIO for PXA27x MMC controller
|
|
*/
|
|
pxa_gpio_mode(GPIO32_MMCCLK_MD);
|
|
pxa_gpio_mode(GPIO112_MMCCMD_MD);
|
|
pxa_gpio_mode(GPIO92_MMCDAT0_MD);
|
|
pxa_gpio_mode(GPIO109_MMCDAT1_MD);
|
|
pxa_gpio_mode(GPIO110_MMCDAT2_MD);
|
|
pxa_gpio_mode(GPIO111_MMCDAT3_MD);
|
|
|
|
/* SB-X270 uses GPIO105 as SD power enable */
|
|
pxa_gpio_mode(105 | GPIO_OUT);
|
|
|
|
/* card detect IRQ on GPIO 83 */
|
|
pxa_gpio_mode(IRQ_TO_GPIO(CMX270_MMC_IRQ));
|
|
|
|
err = request_irq(CMX270_MMC_IRQ, cmx270_detect_int,
|
|
IRQF_DISABLED | IRQF_TRIGGER_FALLING,
|
|
"MMC card detect", data);
|
|
if (err)
|
|
printk(KERN_ERR "cmx270_mci_init: MMC/SD: can't"
|
|
" request MMC card detect IRQ\n");
|
|
|
|
return err;
|
|
}
|
|
|
|
static void cmx270_mci_setpower(struct device *dev, unsigned int vdd)
|
|
{
|
|
struct pxamci_platform_data *p_d = dev->platform_data;
|
|
|
|
if ((1 << vdd) & p_d->ocr_mask) {
|
|
printk(KERN_DEBUG "%s: on\n", __func__);
|
|
GPCR(105) = GPIO_bit(105);
|
|
} else {
|
|
GPSR(105) = GPIO_bit(105);
|
|
printk(KERN_DEBUG "%s: off\n", __func__);
|
|
}
|
|
}
|
|
|
|
static void cmx270_mci_exit(struct device *dev, void *data)
|
|
{
|
|
free_irq(CMX270_MMC_IRQ, data);
|
|
}
|
|
|
|
static struct pxamci_platform_data cmx270_mci_platform_data = {
|
|
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
|
|
.init = cmx270_mci_init,
|
|
.setpower = cmx270_mci_setpower,
|
|
.exit = cmx270_mci_exit,
|
|
};
|
|
|
|
#ifdef CONFIG_PM
|
|
static unsigned long sleep_save_msc[10];
|
|
|
|
static int cmx270_suspend(struct sys_device *dev, pm_message_t state)
|
|
{
|
|
cmx270_pci_suspend();
|
|
|
|
/* save MSC registers */
|
|
sleep_save_msc[0] = MSC0;
|
|
sleep_save_msc[1] = MSC1;
|
|
sleep_save_msc[2] = MSC2;
|
|
|
|
/* setup power saving mode registers */
|
|
PCFR = 0x0;
|
|
PSLR = 0xff400000;
|
|
PMCR = 0x00000005;
|
|
PWER = 0x80000000;
|
|
PFER = 0x00000000;
|
|
PRER = 0x00000000;
|
|
PGSR0 = 0xC0018800;
|
|
PGSR1 = 0x004F0002;
|
|
PGSR2 = 0x6021C000;
|
|
PGSR3 = 0x00020000;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int cmx270_resume(struct sys_device *dev)
|
|
{
|
|
cmx270_pci_resume();
|
|
|
|
/* restore MSC registers */
|
|
MSC0 = sleep_save_msc[0];
|
|
MSC1 = sleep_save_msc[1];
|
|
MSC2 = sleep_save_msc[2];
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct sysdev_class cmx270_pm_sysclass = {
|
|
.name = "pm",
|
|
.resume = cmx270_resume,
|
|
.suspend = cmx270_suspend,
|
|
};
|
|
|
|
static struct sys_device cmx270_pm_device = {
|
|
.cls = &cmx270_pm_sysclass,
|
|
};
|
|
|
|
static int __init cmx270_pm_init(void)
|
|
{
|
|
int error;
|
|
error = sysdev_class_register(&cmx270_pm_sysclass);
|
|
if (error == 0)
|
|
error = sysdev_register(&cmx270_pm_device);
|
|
return error;
|
|
}
|
|
#else
|
|
static int __init cmx270_pm_init(void) { return 0; }
|
|
#endif
|
|
|
|
static void __init cmx270_init(void)
|
|
{
|
|
cmx270_pm_init();
|
|
|
|
set_pxa_fb_info(cmx270_display);
|
|
|
|
/* register CM-X270 platform devices */
|
|
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
|
|
|
|
/* set MCI and OHCI platform parameters */
|
|
pxa_set_mci_info(&cmx270_mci_platform_data);
|
|
pxa_set_ohci_info(&cmx270_ohci_platform_data);
|
|
|
|
/* This enables the STUART */
|
|
pxa_gpio_mode(GPIO46_STRXD_MD);
|
|
pxa_gpio_mode(GPIO47_STTXD_MD);
|
|
|
|
/* This enables the BTUART */
|
|
pxa_gpio_mode(GPIO42_BTRXD_MD);
|
|
pxa_gpio_mode(GPIO43_BTTXD_MD);
|
|
pxa_gpio_mode(GPIO44_BTCTS_MD);
|
|
pxa_gpio_mode(GPIO45_BTRTS_MD);
|
|
}
|
|
|
|
static void __init cmx270_init_irq(void)
|
|
{
|
|
pxa27x_init_irq();
|
|
|
|
|
|
cmx270_pci_init_irq();
|
|
|
|
/* Setup interrupt for dm9000 */
|
|
pxa_gpio_mode(IRQ_TO_GPIO(CMX270_ETHIRQ));
|
|
set_irq_type(CMX270_ETHIRQ, IRQT_RISING);
|
|
|
|
/* Setup interrupt for 2700G */
|
|
pxa_gpio_mode(IRQ_TO_GPIO(CMX270_GFXIRQ));
|
|
set_irq_type(CMX270_GFXIRQ, IRQT_FALLING);
|
|
}
|
|
|
|
static void __init cmx270_map_io(void)
|
|
{
|
|
pxa_map_io();
|
|
iotable_init(cmx270_io_desc, ARRAY_SIZE(cmx270_io_desc));
|
|
}
|
|
|
|
|
|
MACHINE_START(ARMCORE, "Compulab CM-x270")
|
|
.boot_params = 0xa0000100,
|
|
.phys_io = 0x40000000,
|
|
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
|
|
.map_io = cmx270_map_io,
|
|
.init_irq = cmx270_init_irq,
|
|
.timer = &pxa_timer,
|
|
.init_machine = cmx270_init,
|
|
MACHINE_END
|