577 lines
15 KiB
C
577 lines
15 KiB
C
/**
|
|
* APM X-Gene PCIe Driver
|
|
*
|
|
* Copyright (c) 2014 Applied Micro Circuits Corporation.
|
|
*
|
|
* Author: Tanmay Inamdar <tinamdar@apm.com>.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
*/
|
|
#include <linux/clk.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/io.h>
|
|
#include <linux/jiffies.h>
|
|
#include <linux/memblock.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/of_irq.h>
|
|
#include <linux/of_pci.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/slab.h>
|
|
|
|
#define PCIECORE_CTLANDSTATUS 0x50
|
|
#define PIM1_1L 0x80
|
|
#define IBAR2 0x98
|
|
#define IR2MSK 0x9c
|
|
#define PIM2_1L 0xa0
|
|
#define IBAR3L 0xb4
|
|
#define IR3MSKL 0xbc
|
|
#define PIM3_1L 0xc4
|
|
#define OMR1BARL 0x100
|
|
#define OMR2BARL 0x118
|
|
#define OMR3BARL 0x130
|
|
#define CFGBARL 0x154
|
|
#define CFGBARH 0x158
|
|
#define CFGCTL 0x15c
|
|
#define RTDID 0x160
|
|
#define BRIDGE_CFG_0 0x2000
|
|
#define BRIDGE_CFG_4 0x2010
|
|
#define BRIDGE_STATUS_0 0x2600
|
|
|
|
#define LINK_UP_MASK 0x00000100
|
|
#define AXI_EP_CFG_ACCESS 0x10000
|
|
#define EN_COHERENCY 0xF0000000
|
|
#define EN_REG 0x00000001
|
|
#define OB_LO_IO 0x00000002
|
|
#define XGENE_PCIE_VENDORID 0x10E8
|
|
#define XGENE_PCIE_DEVICEID 0xE004
|
|
#define SZ_1T (SZ_1G*1024ULL)
|
|
#define PIPE_PHY_RATE_RD(src) ((0xc000 & (u32)(src)) >> 0xe)
|
|
|
|
#define ROOT_CAP_AND_CTRL 0x5C
|
|
|
|
/* PCIe IP version */
|
|
#define XGENE_PCIE_IP_VER_UNKN 0
|
|
#define XGENE_PCIE_IP_VER_1 1
|
|
|
|
struct xgene_pcie_port {
|
|
struct device_node *node;
|
|
struct device *dev;
|
|
struct clk *clk;
|
|
void __iomem *csr_base;
|
|
void __iomem *cfg_base;
|
|
unsigned long cfg_addr;
|
|
bool link_up;
|
|
u32 version;
|
|
};
|
|
|
|
static inline u32 pcie_bar_low_val(u32 addr, u32 flags)
|
|
{
|
|
return (addr & PCI_BASE_ADDRESS_MEM_MASK) | flags;
|
|
}
|
|
|
|
/*
|
|
* When the address bit [17:16] is 2'b01, the Configuration access will be
|
|
* treated as Type 1 and it will be forwarded to external PCIe device.
|
|
*/
|
|
static void __iomem *xgene_pcie_get_cfg_base(struct pci_bus *bus)
|
|
{
|
|
struct xgene_pcie_port *port = bus->sysdata;
|
|
|
|
if (bus->number >= (bus->primary + 1))
|
|
return port->cfg_base + AXI_EP_CFG_ACCESS;
|
|
|
|
return port->cfg_base;
|
|
}
|
|
|
|
/*
|
|
* For Configuration request, RTDID register is used as Bus Number,
|
|
* Device Number and Function number of the header fields.
|
|
*/
|
|
static void xgene_pcie_set_rtdid_reg(struct pci_bus *bus, uint devfn)
|
|
{
|
|
struct xgene_pcie_port *port = bus->sysdata;
|
|
unsigned int b, d, f;
|
|
u32 rtdid_val = 0;
|
|
|
|
b = bus->number;
|
|
d = PCI_SLOT(devfn);
|
|
f = PCI_FUNC(devfn);
|
|
|
|
if (!pci_is_root_bus(bus))
|
|
rtdid_val = (b << 8) | (d << 3) | f;
|
|
|
|
writel(rtdid_val, port->csr_base + RTDID);
|
|
/* read the register back to ensure flush */
|
|
readl(port->csr_base + RTDID);
|
|
}
|
|
|
|
/*
|
|
* X-Gene PCIe port uses BAR0-BAR1 of RC's configuration space as
|
|
* the translation from PCI bus to native BUS. Entire DDR region
|
|
* is mapped into PCIe space using these registers, so it can be
|
|
* reached by DMA from EP devices. The BAR0/1 of bridge should be
|
|
* hidden during enumeration to avoid the sizing and resource allocation
|
|
* by PCIe core.
|
|
*/
|
|
static bool xgene_pcie_hide_rc_bars(struct pci_bus *bus, int offset)
|
|
{
|
|
if (pci_is_root_bus(bus) && ((offset == PCI_BASE_ADDRESS_0) ||
|
|
(offset == PCI_BASE_ADDRESS_1)))
|
|
return true;
|
|
|
|
return false;
|
|
}
|
|
|
|
static void __iomem *xgene_pcie_map_bus(struct pci_bus *bus, unsigned int devfn,
|
|
int offset)
|
|
{
|
|
if ((pci_is_root_bus(bus) && devfn != 0) ||
|
|
xgene_pcie_hide_rc_bars(bus, offset))
|
|
return NULL;
|
|
|
|
xgene_pcie_set_rtdid_reg(bus, devfn);
|
|
return xgene_pcie_get_cfg_base(bus) + offset;
|
|
}
|
|
|
|
static int xgene_pcie_config_read32(struct pci_bus *bus, unsigned int devfn,
|
|
int where, int size, u32 *val)
|
|
{
|
|
struct xgene_pcie_port *port = bus->sysdata;
|
|
|
|
if (pci_generic_config_read32(bus, devfn, where & ~0x3, 4, val) !=
|
|
PCIBIOS_SUCCESSFUL)
|
|
return PCIBIOS_DEVICE_NOT_FOUND;
|
|
|
|
/*
|
|
* The v1 controller has a bug in its Configuration Request
|
|
* Retry Status (CRS) logic: when CRS is enabled and we read the
|
|
* Vendor and Device ID of a non-existent device, the controller
|
|
* fabricates return data of 0xFFFF0001 ("device exists but is not
|
|
* ready") instead of 0xFFFFFFFF ("device does not exist"). This
|
|
* causes the PCI core to retry the read until it times out.
|
|
* Avoid this by not claiming to support CRS.
|
|
*/
|
|
if (pci_is_root_bus(bus) && (port->version == XGENE_PCIE_IP_VER_1) &&
|
|
((where & ~0x3) == ROOT_CAP_AND_CTRL))
|
|
*val &= ~(PCI_EXP_RTCAP_CRSVIS << 16);
|
|
|
|
if (size <= 2)
|
|
*val = (*val >> (8 * (where & 3))) & ((1 << (size * 8)) - 1);
|
|
|
|
return PCIBIOS_SUCCESSFUL;
|
|
}
|
|
|
|
static struct pci_ops xgene_pcie_ops = {
|
|
.map_bus = xgene_pcie_map_bus,
|
|
.read = xgene_pcie_config_read32,
|
|
.write = pci_generic_config_write32,
|
|
};
|
|
|
|
static u64 xgene_pcie_set_ib_mask(void __iomem *csr_base, u32 addr,
|
|
u32 flags, u64 size)
|
|
{
|
|
u64 mask = (~(size - 1) & PCI_BASE_ADDRESS_MEM_MASK) | flags;
|
|
u32 val32 = 0;
|
|
u32 val;
|
|
|
|
val32 = readl(csr_base + addr);
|
|
val = (val32 & 0x0000ffff) | (lower_32_bits(mask) << 16);
|
|
writel(val, csr_base + addr);
|
|
|
|
val32 = readl(csr_base + addr + 0x04);
|
|
val = (val32 & 0xffff0000) | (lower_32_bits(mask) >> 16);
|
|
writel(val, csr_base + addr + 0x04);
|
|
|
|
val32 = readl(csr_base + addr + 0x04);
|
|
val = (val32 & 0x0000ffff) | (upper_32_bits(mask) << 16);
|
|
writel(val, csr_base + addr + 0x04);
|
|
|
|
val32 = readl(csr_base + addr + 0x08);
|
|
val = (val32 & 0xffff0000) | (upper_32_bits(mask) >> 16);
|
|
writel(val, csr_base + addr + 0x08);
|
|
|
|
return mask;
|
|
}
|
|
|
|
static void xgene_pcie_linkup(struct xgene_pcie_port *port,
|
|
u32 *lanes, u32 *speed)
|
|
{
|
|
void __iomem *csr_base = port->csr_base;
|
|
u32 val32;
|
|
|
|
port->link_up = false;
|
|
val32 = readl(csr_base + PCIECORE_CTLANDSTATUS);
|
|
if (val32 & LINK_UP_MASK) {
|
|
port->link_up = true;
|
|
*speed = PIPE_PHY_RATE_RD(val32);
|
|
val32 = readl(csr_base + BRIDGE_STATUS_0);
|
|
*lanes = val32 >> 26;
|
|
}
|
|
}
|
|
|
|
static int xgene_pcie_init_port(struct xgene_pcie_port *port)
|
|
{
|
|
int rc;
|
|
|
|
port->clk = clk_get(port->dev, NULL);
|
|
if (IS_ERR(port->clk)) {
|
|
dev_err(port->dev, "clock not available\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
rc = clk_prepare_enable(port->clk);
|
|
if (rc) {
|
|
dev_err(port->dev, "clock enable failed\n");
|
|
return rc;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int xgene_pcie_map_reg(struct xgene_pcie_port *port,
|
|
struct platform_device *pdev)
|
|
{
|
|
struct resource *res;
|
|
|
|
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "csr");
|
|
port->csr_base = devm_ioremap_resource(port->dev, res);
|
|
if (IS_ERR(port->csr_base))
|
|
return PTR_ERR(port->csr_base);
|
|
|
|
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "cfg");
|
|
port->cfg_base = devm_ioremap_resource(port->dev, res);
|
|
if (IS_ERR(port->cfg_base))
|
|
return PTR_ERR(port->cfg_base);
|
|
port->cfg_addr = res->start;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void xgene_pcie_setup_ob_reg(struct xgene_pcie_port *port,
|
|
struct resource *res, u32 offset,
|
|
u64 cpu_addr, u64 pci_addr)
|
|
{
|
|
void __iomem *base = port->csr_base + offset;
|
|
resource_size_t size = resource_size(res);
|
|
u64 restype = resource_type(res);
|
|
u64 mask = 0;
|
|
u32 min_size;
|
|
u32 flag = EN_REG;
|
|
|
|
if (restype == IORESOURCE_MEM) {
|
|
min_size = SZ_128M;
|
|
} else {
|
|
min_size = 128;
|
|
flag |= OB_LO_IO;
|
|
}
|
|
|
|
if (size >= min_size)
|
|
mask = ~(size - 1) | flag;
|
|
else
|
|
dev_warn(port->dev, "res size 0x%llx less than minimum 0x%x\n",
|
|
(u64)size, min_size);
|
|
|
|
writel(lower_32_bits(cpu_addr), base);
|
|
writel(upper_32_bits(cpu_addr), base + 0x04);
|
|
writel(lower_32_bits(mask), base + 0x08);
|
|
writel(upper_32_bits(mask), base + 0x0c);
|
|
writel(lower_32_bits(pci_addr), base + 0x10);
|
|
writel(upper_32_bits(pci_addr), base + 0x14);
|
|
}
|
|
|
|
static void xgene_pcie_setup_cfg_reg(void __iomem *csr_base, u64 addr)
|
|
{
|
|
writel(lower_32_bits(addr), csr_base + CFGBARL);
|
|
writel(upper_32_bits(addr), csr_base + CFGBARH);
|
|
writel(EN_REG, csr_base + CFGCTL);
|
|
}
|
|
|
|
static int xgene_pcie_map_ranges(struct xgene_pcie_port *port,
|
|
struct list_head *res,
|
|
resource_size_t io_base)
|
|
{
|
|
struct resource_entry *window;
|
|
struct device *dev = port->dev;
|
|
int ret;
|
|
|
|
resource_list_for_each_entry(window, res) {
|
|
struct resource *res = window->res;
|
|
u64 restype = resource_type(res);
|
|
|
|
dev_dbg(port->dev, "%pR\n", res);
|
|
|
|
switch (restype) {
|
|
case IORESOURCE_IO:
|
|
xgene_pcie_setup_ob_reg(port, res, OMR3BARL, io_base,
|
|
res->start - window->offset);
|
|
ret = pci_remap_iospace(res, io_base);
|
|
if (ret < 0)
|
|
return ret;
|
|
break;
|
|
case IORESOURCE_MEM:
|
|
if (res->flags & IORESOURCE_PREFETCH)
|
|
xgene_pcie_setup_ob_reg(port, res, OMR2BARL,
|
|
res->start,
|
|
res->start -
|
|
window->offset);
|
|
else
|
|
xgene_pcie_setup_ob_reg(port, res, OMR1BARL,
|
|
res->start,
|
|
res->start -
|
|
window->offset);
|
|
break;
|
|
case IORESOURCE_BUS:
|
|
break;
|
|
default:
|
|
dev_err(dev, "invalid resource %pR\n", res);
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
xgene_pcie_setup_cfg_reg(port->csr_base, port->cfg_addr);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void xgene_pcie_setup_pims(void *addr, u64 pim, u64 size)
|
|
{
|
|
writel(lower_32_bits(pim), addr);
|
|
writel(upper_32_bits(pim) | EN_COHERENCY, addr + 0x04);
|
|
writel(lower_32_bits(size), addr + 0x10);
|
|
writel(upper_32_bits(size), addr + 0x14);
|
|
}
|
|
|
|
/*
|
|
* X-Gene PCIe support maximum 3 inbound memory regions
|
|
* This function helps to select a region based on size of region
|
|
*/
|
|
static int xgene_pcie_select_ib_reg(u8 *ib_reg_mask, u64 size)
|
|
{
|
|
if ((size > 4) && (size < SZ_16M) && !(*ib_reg_mask & (1 << 1))) {
|
|
*ib_reg_mask |= (1 << 1);
|
|
return 1;
|
|
}
|
|
|
|
if ((size > SZ_1K) && (size < SZ_1T) && !(*ib_reg_mask & (1 << 0))) {
|
|
*ib_reg_mask |= (1 << 0);
|
|
return 0;
|
|
}
|
|
|
|
if ((size > SZ_1M) && (size < SZ_1T) && !(*ib_reg_mask & (1 << 2))) {
|
|
*ib_reg_mask |= (1 << 2);
|
|
return 2;
|
|
}
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
static void xgene_pcie_setup_ib_reg(struct xgene_pcie_port *port,
|
|
struct of_pci_range *range, u8 *ib_reg_mask)
|
|
{
|
|
void __iomem *csr_base = port->csr_base;
|
|
void __iomem *cfg_base = port->cfg_base;
|
|
void *bar_addr;
|
|
void *pim_addr;
|
|
u64 cpu_addr = range->cpu_addr;
|
|
u64 pci_addr = range->pci_addr;
|
|
u64 size = range->size;
|
|
u64 mask = ~(size - 1) | EN_REG;
|
|
u32 flags = PCI_BASE_ADDRESS_MEM_TYPE_64;
|
|
u32 bar_low;
|
|
int region;
|
|
|
|
region = xgene_pcie_select_ib_reg(ib_reg_mask, range->size);
|
|
if (region < 0) {
|
|
dev_warn(port->dev, "invalid pcie dma-range config\n");
|
|
return;
|
|
}
|
|
|
|
if (range->flags & IORESOURCE_PREFETCH)
|
|
flags |= PCI_BASE_ADDRESS_MEM_PREFETCH;
|
|
|
|
bar_low = pcie_bar_low_val((u32)cpu_addr, flags);
|
|
switch (region) {
|
|
case 0:
|
|
xgene_pcie_set_ib_mask(csr_base, BRIDGE_CFG_4, flags, size);
|
|
bar_addr = cfg_base + PCI_BASE_ADDRESS_0;
|
|
writel(bar_low, bar_addr);
|
|
writel(upper_32_bits(cpu_addr), bar_addr + 0x4);
|
|
pim_addr = csr_base + PIM1_1L;
|
|
break;
|
|
case 1:
|
|
bar_addr = csr_base + IBAR2;
|
|
writel(bar_low, bar_addr);
|
|
writel(lower_32_bits(mask), csr_base + IR2MSK);
|
|
pim_addr = csr_base + PIM2_1L;
|
|
break;
|
|
case 2:
|
|
bar_addr = csr_base + IBAR3L;
|
|
writel(bar_low, bar_addr);
|
|
writel(upper_32_bits(cpu_addr), bar_addr + 0x4);
|
|
writel(lower_32_bits(mask), csr_base + IR3MSKL);
|
|
writel(upper_32_bits(mask), csr_base + IR3MSKL + 0x4);
|
|
pim_addr = csr_base + PIM3_1L;
|
|
break;
|
|
}
|
|
|
|
xgene_pcie_setup_pims(pim_addr, pci_addr, ~(size - 1));
|
|
}
|
|
|
|
static int pci_dma_range_parser_init(struct of_pci_range_parser *parser,
|
|
struct device_node *node)
|
|
{
|
|
const int na = 3, ns = 2;
|
|
int rlen;
|
|
|
|
parser->node = node;
|
|
parser->pna = of_n_addr_cells(node);
|
|
parser->np = parser->pna + na + ns;
|
|
|
|
parser->range = of_get_property(node, "dma-ranges", &rlen);
|
|
if (!parser->range)
|
|
return -ENOENT;
|
|
parser->end = parser->range + rlen / sizeof(__be32);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int xgene_pcie_parse_map_dma_ranges(struct xgene_pcie_port *port)
|
|
{
|
|
struct device_node *np = port->node;
|
|
struct of_pci_range range;
|
|
struct of_pci_range_parser parser;
|
|
struct device *dev = port->dev;
|
|
u8 ib_reg_mask = 0;
|
|
|
|
if (pci_dma_range_parser_init(&parser, np)) {
|
|
dev_err(dev, "missing dma-ranges property\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Get the dma-ranges from DT */
|
|
for_each_of_pci_range(&parser, &range) {
|
|
u64 end = range.cpu_addr + range.size - 1;
|
|
|
|
dev_dbg(port->dev, "0x%08x 0x%016llx..0x%016llx -> 0x%016llx\n",
|
|
range.flags, range.cpu_addr, end, range.pci_addr);
|
|
xgene_pcie_setup_ib_reg(port, &range, &ib_reg_mask);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/* clear BAR configuration which was done by firmware */
|
|
static void xgene_pcie_clear_config(struct xgene_pcie_port *port)
|
|
{
|
|
int i;
|
|
|
|
for (i = PIM1_1L; i <= CFGCTL; i += 4)
|
|
writel(0x0, port->csr_base + i);
|
|
}
|
|
|
|
static int xgene_pcie_setup(struct xgene_pcie_port *port,
|
|
struct list_head *res,
|
|
resource_size_t io_base)
|
|
{
|
|
u32 val, lanes = 0, speed = 0;
|
|
int ret;
|
|
|
|
xgene_pcie_clear_config(port);
|
|
|
|
/* setup the vendor and device IDs correctly */
|
|
val = (XGENE_PCIE_DEVICEID << 16) | XGENE_PCIE_VENDORID;
|
|
writel(val, port->csr_base + BRIDGE_CFG_0);
|
|
|
|
ret = xgene_pcie_map_ranges(port, res, io_base);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = xgene_pcie_parse_map_dma_ranges(port);
|
|
if (ret)
|
|
return ret;
|
|
|
|
xgene_pcie_linkup(port, &lanes, &speed);
|
|
if (!port->link_up)
|
|
dev_info(port->dev, "(rc) link down\n");
|
|
else
|
|
dev_info(port->dev, "(rc) x%d gen-%d link up\n",
|
|
lanes, speed + 1);
|
|
return 0;
|
|
}
|
|
|
|
static int xgene_pcie_probe_bridge(struct platform_device *pdev)
|
|
{
|
|
struct device_node *dn = pdev->dev.of_node;
|
|
struct xgene_pcie_port *port;
|
|
resource_size_t iobase = 0;
|
|
struct pci_bus *bus;
|
|
int ret;
|
|
LIST_HEAD(res);
|
|
|
|
port = devm_kzalloc(&pdev->dev, sizeof(*port), GFP_KERNEL);
|
|
if (!port)
|
|
return -ENOMEM;
|
|
port->node = of_node_get(pdev->dev.of_node);
|
|
port->dev = &pdev->dev;
|
|
|
|
port->version = XGENE_PCIE_IP_VER_UNKN;
|
|
if (of_device_is_compatible(port->node, "apm,xgene-pcie"))
|
|
port->version = XGENE_PCIE_IP_VER_1;
|
|
|
|
ret = xgene_pcie_map_reg(port, pdev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = xgene_pcie_init_port(port);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = of_pci_get_host_bridge_resources(dn, 0, 0xff, &res, &iobase);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = xgene_pcie_setup(port, &res, iobase);
|
|
if (ret)
|
|
return ret;
|
|
|
|
bus = pci_create_root_bus(&pdev->dev, 0,
|
|
&xgene_pcie_ops, port, &res);
|
|
if (!bus)
|
|
return -ENOMEM;
|
|
|
|
pci_scan_child_bus(bus);
|
|
pci_assign_unassigned_bus_resources(bus);
|
|
pci_bus_add_devices(bus);
|
|
|
|
platform_set_drvdata(pdev, port);
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id xgene_pcie_match_table[] = {
|
|
{.compatible = "apm,xgene-pcie",},
|
|
{},
|
|
};
|
|
|
|
static struct platform_driver xgene_pcie_driver = {
|
|
.driver = {
|
|
.name = "xgene-pcie",
|
|
.of_match_table = of_match_ptr(xgene_pcie_match_table),
|
|
},
|
|
.probe = xgene_pcie_probe_bridge,
|
|
};
|
|
module_platform_driver(xgene_pcie_driver);
|
|
|
|
MODULE_AUTHOR("Tanmay Inamdar <tinamdar@apm.com>");
|
|
MODULE_DESCRIPTION("APM X-Gene PCIe driver");
|
|
MODULE_LICENSE("GPL v2");
|