226 lines
12 KiB
C
226 lines
12 KiB
C
#ifndef LINUX_BCMA_DRIVER_PCI_H_
|
|
#define LINUX_BCMA_DRIVER_PCI_H_
|
|
|
|
#include <linux/types.h>
|
|
|
|
struct pci_dev;
|
|
|
|
/** PCI core registers. **/
|
|
#define BCMA_CORE_PCI_CTL 0x0000 /* PCI Control */
|
|
#define BCMA_CORE_PCI_CTL_RST_OE 0x00000001 /* PCI_RESET Output Enable */
|
|
#define BCMA_CORE_PCI_CTL_RST 0x00000002 /* PCI_RESET driven out to pin */
|
|
#define BCMA_CORE_PCI_CTL_CLK_OE 0x00000004 /* Clock gate Output Enable */
|
|
#define BCMA_CORE_PCI_CTL_CLK 0x00000008 /* Gate for clock driven out to pin */
|
|
#define BCMA_CORE_PCI_ARBCTL 0x0010 /* PCI Arbiter Control */
|
|
#define BCMA_CORE_PCI_ARBCTL_INTERN 0x00000001 /* Use internal arbiter */
|
|
#define BCMA_CORE_PCI_ARBCTL_EXTERN 0x00000002 /* Use external arbiter */
|
|
#define BCMA_CORE_PCI_ARBCTL_PARKID 0x00000006 /* Mask, selects which agent is parked on an idle bus */
|
|
#define BCMA_CORE_PCI_ARBCTL_PARKID_LAST 0x00000000 /* Last requestor */
|
|
#define BCMA_CORE_PCI_ARBCTL_PARKID_4710 0x00000002 /* 4710 */
|
|
#define BCMA_CORE_PCI_ARBCTL_PARKID_EXT0 0x00000004 /* External requestor 0 */
|
|
#define BCMA_CORE_PCI_ARBCTL_PARKID_EXT1 0x00000006 /* External requestor 1 */
|
|
#define BCMA_CORE_PCI_ISTAT 0x0020 /* Interrupt status */
|
|
#define BCMA_CORE_PCI_ISTAT_INTA 0x00000001 /* PCI INTA# */
|
|
#define BCMA_CORE_PCI_ISTAT_INTB 0x00000002 /* PCI INTB# */
|
|
#define BCMA_CORE_PCI_ISTAT_SERR 0x00000004 /* PCI SERR# (write to clear) */
|
|
#define BCMA_CORE_PCI_ISTAT_PERR 0x00000008 /* PCI PERR# (write to clear) */
|
|
#define BCMA_CORE_PCI_ISTAT_PME 0x00000010 /* PCI PME# */
|
|
#define BCMA_CORE_PCI_IMASK 0x0024 /* Interrupt mask */
|
|
#define BCMA_CORE_PCI_IMASK_INTA 0x00000001 /* PCI INTA# */
|
|
#define BCMA_CORE_PCI_IMASK_INTB 0x00000002 /* PCI INTB# */
|
|
#define BCMA_CORE_PCI_IMASK_SERR 0x00000004 /* PCI SERR# */
|
|
#define BCMA_CORE_PCI_IMASK_PERR 0x00000008 /* PCI PERR# */
|
|
#define BCMA_CORE_PCI_IMASK_PME 0x00000010 /* PCI PME# */
|
|
#define BCMA_CORE_PCI_MBOX 0x0028 /* Backplane to PCI Mailbox */
|
|
#define BCMA_CORE_PCI_MBOX_F0_0 0x00000100 /* PCI function 0, INT 0 */
|
|
#define BCMA_CORE_PCI_MBOX_F0_1 0x00000200 /* PCI function 0, INT 1 */
|
|
#define BCMA_CORE_PCI_MBOX_F1_0 0x00000400 /* PCI function 1, INT 0 */
|
|
#define BCMA_CORE_PCI_MBOX_F1_1 0x00000800 /* PCI function 1, INT 1 */
|
|
#define BCMA_CORE_PCI_MBOX_F2_0 0x00001000 /* PCI function 2, INT 0 */
|
|
#define BCMA_CORE_PCI_MBOX_F2_1 0x00002000 /* PCI function 2, INT 1 */
|
|
#define BCMA_CORE_PCI_MBOX_F3_0 0x00004000 /* PCI function 3, INT 0 */
|
|
#define BCMA_CORE_PCI_MBOX_F3_1 0x00008000 /* PCI function 3, INT 1 */
|
|
#define BCMA_CORE_PCI_BCAST_ADDR 0x0050 /* Backplane Broadcast Address */
|
|
#define BCMA_CORE_PCI_BCAST_ADDR_MASK 0x000000FF
|
|
#define BCMA_CORE_PCI_BCAST_DATA 0x0054 /* Backplane Broadcast Data */
|
|
#define BCMA_CORE_PCI_GPIO_IN 0x0060 /* rev >= 2 only */
|
|
#define BCMA_CORE_PCI_GPIO_OUT 0x0064 /* rev >= 2 only */
|
|
#define BCMA_CORE_PCI_GPIO_ENABLE 0x0068 /* rev >= 2 only */
|
|
#define BCMA_CORE_PCI_GPIO_CTL 0x006C /* rev >= 2 only */
|
|
#define BCMA_CORE_PCI_SBTOPCI0 0x0100 /* Backplane to PCI translation 0 (sbtopci0) */
|
|
#define BCMA_CORE_PCI_SBTOPCI0_MASK 0xFC000000
|
|
#define BCMA_CORE_PCI_SBTOPCI1 0x0104 /* Backplane to PCI translation 1 (sbtopci1) */
|
|
#define BCMA_CORE_PCI_SBTOPCI1_MASK 0xFC000000
|
|
#define BCMA_CORE_PCI_SBTOPCI2 0x0108 /* Backplane to PCI translation 2 (sbtopci2) */
|
|
#define BCMA_CORE_PCI_SBTOPCI2_MASK 0xC0000000
|
|
#define BCMA_CORE_PCI_CONFIG_ADDR 0x0120 /* pcie config space access */
|
|
#define BCMA_CORE_PCI_CONFIG_DATA 0x0124 /* pcie config space access */
|
|
#define BCMA_CORE_PCI_MDIO_CONTROL 0x0128 /* controls the mdio access */
|
|
#define BCMA_CORE_PCI_MDIOCTL_DIVISOR_MASK 0x7f /* clock to be used on MDIO */
|
|
#define BCMA_CORE_PCI_MDIOCTL_DIVISOR_VAL 0x2
|
|
#define BCMA_CORE_PCI_MDIOCTL_PREAM_EN 0x80 /* Enable preamble sequnce */
|
|
#define BCMA_CORE_PCI_MDIOCTL_ACCESS_DONE 0x100 /* Tranaction complete */
|
|
#define BCMA_CORE_PCI_MDIO_DATA 0x012c /* Data to the mdio access */
|
|
#define BCMA_CORE_PCI_MDIODATA_MASK 0x0000ffff /* data 2 bytes */
|
|
#define BCMA_CORE_PCI_MDIODATA_TA 0x00020000 /* Turnaround */
|
|
#define BCMA_CORE_PCI_MDIODATA_REGADDR_SHF_OLD 18 /* Regaddr shift (rev < 10) */
|
|
#define BCMA_CORE_PCI_MDIODATA_REGADDR_MASK_OLD 0x003c0000 /* Regaddr Mask (rev < 10) */
|
|
#define BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF_OLD 22 /* Physmedia devaddr shift (rev < 10) */
|
|
#define BCMA_CORE_PCI_MDIODATA_DEVADDR_MASK_OLD 0x0fc00000 /* Physmedia devaddr Mask (rev < 10) */
|
|
#define BCMA_CORE_PCI_MDIODATA_REGADDR_SHF 18 /* Regaddr shift */
|
|
#define BCMA_CORE_PCI_MDIODATA_REGADDR_MASK 0x007c0000 /* Regaddr Mask */
|
|
#define BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF 23 /* Physmedia devaddr shift */
|
|
#define BCMA_CORE_PCI_MDIODATA_DEVADDR_MASK 0x0f800000 /* Physmedia devaddr Mask */
|
|
#define BCMA_CORE_PCI_MDIODATA_WRITE 0x10000000 /* write Transaction */
|
|
#define BCMA_CORE_PCI_MDIODATA_READ 0x20000000 /* Read Transaction */
|
|
#define BCMA_CORE_PCI_MDIODATA_START 0x40000000 /* start of Transaction */
|
|
#define BCMA_CORE_PCI_MDIODATA_DEV_ADDR 0x0 /* dev address for serdes */
|
|
#define BCMA_CORE_PCI_MDIODATA_BLK_ADDR 0x1F /* blk address for serdes */
|
|
#define BCMA_CORE_PCI_MDIODATA_DEV_PLL 0x1d /* SERDES PLL Dev */
|
|
#define BCMA_CORE_PCI_MDIODATA_DEV_TX 0x1e /* SERDES TX Dev */
|
|
#define BCMA_CORE_PCI_MDIODATA_DEV_RX 0x1f /* SERDES RX Dev */
|
|
#define BCMA_CORE_PCI_PCIEIND_ADDR 0x0130 /* indirect access to the internal register */
|
|
#define BCMA_CORE_PCI_PCIEIND_DATA 0x0134 /* Data to/from the internal regsiter */
|
|
#define BCMA_CORE_PCI_CLKREQENCTRL 0x0138 /* >= rev 6, Clkreq rdma control */
|
|
#define BCMA_CORE_PCI_PCICFG0 0x0400 /* PCI config space 0 (rev >= 8) */
|
|
#define BCMA_CORE_PCI_PCICFG1 0x0500 /* PCI config space 1 (rev >= 8) */
|
|
#define BCMA_CORE_PCI_PCICFG2 0x0600 /* PCI config space 2 (rev >= 8) */
|
|
#define BCMA_CORE_PCI_PCICFG3 0x0700 /* PCI config space 3 (rev >= 8) */
|
|
#define BCMA_CORE_PCI_SPROM(wordoffset) (0x0800 + ((wordoffset) * 2)) /* SPROM shadow area (72 bytes) */
|
|
#define BCMA_CORE_PCI_SPROM_PI_OFFSET 0 /* first word */
|
|
#define BCMA_CORE_PCI_SPROM_PI_MASK 0xf000 /* bit 15:12 */
|
|
#define BCMA_CORE_PCI_SPROM_PI_SHIFT 12 /* bit 15:12 */
|
|
#define BCMA_CORE_PCI_SPROM_MISC_CONFIG 5 /* word 5 */
|
|
#define BCMA_CORE_PCI_SPROM_L23READY_EXIT_NOPERST 0x8000 /* bit 15 */
|
|
#define BCMA_CORE_PCI_SPROM_CLKREQ_OFFSET_REV5 20 /* word 20 for srom rev <= 5 */
|
|
#define BCMA_CORE_PCI_SPROM_CLKREQ_ENB 0x0800 /* bit 11 */
|
|
|
|
/* SBtoPCIx */
|
|
#define BCMA_CORE_PCI_SBTOPCI_MEM 0x00000000
|
|
#define BCMA_CORE_PCI_SBTOPCI_IO 0x00000001
|
|
#define BCMA_CORE_PCI_SBTOPCI_CFG0 0x00000002
|
|
#define BCMA_CORE_PCI_SBTOPCI_CFG1 0x00000003
|
|
#define BCMA_CORE_PCI_SBTOPCI_PREF 0x00000004 /* Prefetch enable */
|
|
#define BCMA_CORE_PCI_SBTOPCI_BURST 0x00000008 /* Burst enable */
|
|
#define BCMA_CORE_PCI_SBTOPCI_MRM 0x00000020 /* Memory Read Multiple */
|
|
#define BCMA_CORE_PCI_SBTOPCI_RC 0x00000030 /* Read Command mask (rev >= 11) */
|
|
#define BCMA_CORE_PCI_SBTOPCI_RC_READ 0x00000000 /* Memory read */
|
|
#define BCMA_CORE_PCI_SBTOPCI_RC_READL 0x00000010 /* Memory read line */
|
|
#define BCMA_CORE_PCI_SBTOPCI_RC_READM 0x00000020 /* Memory read multiple */
|
|
|
|
/* PCIE protocol PHY diagnostic registers */
|
|
#define BCMA_CORE_PCI_PLP_MODEREG 0x200 /* Mode */
|
|
#define BCMA_CORE_PCI_PLP_STATUSREG 0x204 /* Status */
|
|
#define BCMA_CORE_PCI_PLP_POLARITYINV_STAT 0x10 /* Status reg PCIE_PLP_STATUSREG */
|
|
#define BCMA_CORE_PCI_PLP_LTSSMCTRLREG 0x208 /* LTSSM control */
|
|
#define BCMA_CORE_PCI_PLP_LTLINKNUMREG 0x20c /* Link Training Link number */
|
|
#define BCMA_CORE_PCI_PLP_LTLANENUMREG 0x210 /* Link Training Lane number */
|
|
#define BCMA_CORE_PCI_PLP_LTNFTSREG 0x214 /* Link Training N_FTS */
|
|
#define BCMA_CORE_PCI_PLP_ATTNREG 0x218 /* Attention */
|
|
#define BCMA_CORE_PCI_PLP_ATTNMASKREG 0x21C /* Attention Mask */
|
|
#define BCMA_CORE_PCI_PLP_RXERRCTR 0x220 /* Rx Error */
|
|
#define BCMA_CORE_PCI_PLP_RXFRMERRCTR 0x224 /* Rx Framing Error */
|
|
#define BCMA_CORE_PCI_PLP_RXERRTHRESHREG 0x228 /* Rx Error threshold */
|
|
#define BCMA_CORE_PCI_PLP_TESTCTRLREG 0x22C /* Test Control reg */
|
|
#define BCMA_CORE_PCI_PLP_SERDESCTRLOVRDREG 0x230 /* SERDES Control Override */
|
|
#define BCMA_CORE_PCI_PLP_TIMINGOVRDREG 0x234 /* Timing param override */
|
|
#define BCMA_CORE_PCI_PLP_RXTXSMDIAGREG 0x238 /* RXTX State Machine Diag */
|
|
#define BCMA_CORE_PCI_PLP_LTSSMDIAGREG 0x23C /* LTSSM State Machine Diag */
|
|
|
|
/* PCIE protocol DLLP diagnostic registers */
|
|
#define BCMA_CORE_PCI_DLLP_LCREG 0x100 /* Link Control */
|
|
#define BCMA_CORE_PCI_DLLP_LSREG 0x104 /* Link Status */
|
|
#define BCMA_CORE_PCI_DLLP_LAREG 0x108 /* Link Attention */
|
|
#define BCMA_CORE_PCI_DLLP_LSREG_LINKUP (1 << 16)
|
|
#define BCMA_CORE_PCI_DLLP_LAMASKREG 0x10C /* Link Attention Mask */
|
|
#define BCMA_CORE_PCI_DLLP_NEXTTXSEQNUMREG 0x110 /* Next Tx Seq Num */
|
|
#define BCMA_CORE_PCI_DLLP_ACKEDTXSEQNUMREG 0x114 /* Acked Tx Seq Num */
|
|
#define BCMA_CORE_PCI_DLLP_PURGEDTXSEQNUMREG 0x118 /* Purged Tx Seq Num */
|
|
#define BCMA_CORE_PCI_DLLP_RXSEQNUMREG 0x11C /* Rx Sequence Number */
|
|
#define BCMA_CORE_PCI_DLLP_LRREG 0x120 /* Link Replay */
|
|
#define BCMA_CORE_PCI_DLLP_LACKTOREG 0x124 /* Link Ack Timeout */
|
|
#define BCMA_CORE_PCI_DLLP_PMTHRESHREG 0x128 /* Power Management Threshold */
|
|
#define BCMA_CORE_PCI_ASPMTIMER_EXTEND 0x01000000 /* > rev7: enable extend ASPM timer */
|
|
#define BCMA_CORE_PCI_DLLP_RTRYWPREG 0x12C /* Retry buffer write ptr */
|
|
#define BCMA_CORE_PCI_DLLP_RTRYRPREG 0x130 /* Retry buffer Read ptr */
|
|
#define BCMA_CORE_PCI_DLLP_RTRYPPREG 0x134 /* Retry buffer Purged ptr */
|
|
#define BCMA_CORE_PCI_DLLP_RTRRWREG 0x138 /* Retry buffer Read/Write */
|
|
#define BCMA_CORE_PCI_DLLP_ECTHRESHREG 0x13C /* Error Count Threshold */
|
|
#define BCMA_CORE_PCI_DLLP_TLPERRCTRREG 0x140 /* TLP Error Counter */
|
|
#define BCMA_CORE_PCI_DLLP_ERRCTRREG 0x144 /* Error Counter */
|
|
#define BCMA_CORE_PCI_DLLP_NAKRXCTRREG 0x148 /* NAK Received Counter */
|
|
#define BCMA_CORE_PCI_DLLP_TESTREG 0x14C /* Test */
|
|
#define BCMA_CORE_PCI_DLLP_PKTBIST 0x150 /* Packet BIST */
|
|
#define BCMA_CORE_PCI_DLLP_PCIE11 0x154 /* DLLP PCIE 1.1 reg */
|
|
|
|
/* SERDES RX registers */
|
|
#define BCMA_CORE_PCI_SERDES_RX_CTRL 1 /* Rx cntrl */
|
|
#define BCMA_CORE_PCI_SERDES_RX_CTRL_FORCE 0x80 /* rxpolarity_force */
|
|
#define BCMA_CORE_PCI_SERDES_RX_CTRL_POLARITY 0x40 /* rxpolarity_value */
|
|
#define BCMA_CORE_PCI_SERDES_RX_TIMER1 2 /* Rx Timer1 */
|
|
#define BCMA_CORE_PCI_SERDES_RX_CDR 6 /* CDR */
|
|
#define BCMA_CORE_PCI_SERDES_RX_CDRBW 7 /* CDR BW */
|
|
|
|
/* SERDES PLL registers */
|
|
#define BCMA_CORE_PCI_SERDES_PLL_CTRL 1 /* PLL control reg */
|
|
#define BCMA_CORE_PCI_PLL_CTRL_FREQDET_EN 0x4000 /* bit 14 is FREQDET on */
|
|
|
|
/* PCIcore specific boardflags */
|
|
#define BCMA_CORE_PCI_BFL_NOPCI 0x00000400 /* Board leaves PCI floating */
|
|
|
|
/* PCIE Config space accessing MACROS */
|
|
#define BCMA_CORE_PCI_CFG_BUS_SHIFT 24 /* Bus shift */
|
|
#define BCMA_CORE_PCI_CFG_SLOT_SHIFT 19 /* Slot/Device shift */
|
|
#define BCMA_CORE_PCI_CFG_FUN_SHIFT 16 /* Function shift */
|
|
#define BCMA_CORE_PCI_CFG_OFF_SHIFT 0 /* Register shift */
|
|
|
|
#define BCMA_CORE_PCI_CFG_BUS_MASK 0xff /* Bus mask */
|
|
#define BCMA_CORE_PCI_CFG_SLOT_MASK 0x1f /* Slot/Device mask */
|
|
#define BCMA_CORE_PCI_CFG_FUN_MASK 7 /* Function mask */
|
|
#define BCMA_CORE_PCI_CFG_OFF_MASK 0xfff /* Register mask */
|
|
|
|
/* PCIE Root Capability Register bits (Host mode only) */
|
|
#define BCMA_CORE_PCI_RC_CRS_VISIBILITY 0x0001
|
|
|
|
struct bcma_drv_pci;
|
|
|
|
#ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE
|
|
struct bcma_drv_pci_host {
|
|
struct bcma_drv_pci *pdev;
|
|
|
|
u32 host_cfg_addr;
|
|
spinlock_t cfgspace_lock;
|
|
|
|
struct pci_controller pci_controller;
|
|
struct pci_ops pci_ops;
|
|
struct resource mem_resource;
|
|
struct resource io_resource;
|
|
};
|
|
#endif
|
|
|
|
struct bcma_drv_pci {
|
|
struct bcma_device *core;
|
|
u8 setup_done:1;
|
|
u8 hostmode:1;
|
|
|
|
#ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE
|
|
struct bcma_drv_pci_host *host_controller;
|
|
#endif
|
|
};
|
|
|
|
/* Register access */
|
|
#define pcicore_read16(pc, offset) bcma_read16((pc)->core, offset)
|
|
#define pcicore_read32(pc, offset) bcma_read32((pc)->core, offset)
|
|
#define pcicore_write16(pc, offset, val) bcma_write16((pc)->core, offset, val)
|
|
#define pcicore_write32(pc, offset, val) bcma_write32((pc)->core, offset, val)
|
|
|
|
extern void bcma_core_pci_init(struct bcma_drv_pci *pc);
|
|
extern int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc,
|
|
struct bcma_device *core, bool enable);
|
|
extern void bcma_core_pci_extend_L1timer(struct bcma_drv_pci *pc, bool extend);
|
|
|
|
extern int bcma_core_pci_pcibios_map_irq(const struct pci_dev *dev);
|
|
extern int bcma_core_pci_plat_dev_init(struct pci_dev *dev);
|
|
|
|
#endif /* LINUX_BCMA_DRIVER_PCI_H_ */
|