Adrian Hunter d9bfbb95ed mmc: sdio: Fix invalid vdd in voltage switch power cycle ... The 'ocr' parameter passed to mmc_set_signal_voltage() defines the power-on voltage used when power cycling after a failure to set the voltage. However, in the case of mmc_sdio_init_card(), the value passed has the R4_18V_PRESENT flag set which is not valid for power-on and results in an invalid vdd. Fix by passing the card's ocr value which does not have the flag. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org # v3.13+ Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>		2015-12-22 11:32:15 +01:00
..
Kconfig	mmc: core: Remove MMC_CLKGATE	2015-10-26 16:00:09 +01:00
Makefile	mmc: pwrseq: add driver for emmc hardware reset	2015-02-04 09:45:09 +01:00
bus.c	Revert "mmc: core: Convert mmc_driver to device_driver"	2015-04-17 11:48:01 +02:00
bus.h	mmc: rename dev_to_mmc_card() to mmc_dev_to_card()	2010-10-23 21:11:12 +08:00
core.c	mmc: core: Introduce MMC_CAP2_NO_SDIO cap	2015-12-22 11:32:13 +01:00
core.h	mmc: fix mmc_{un,}register_pm_notifier prototypes	2015-12-22 11:32:09 +01:00
debugfs.c	mmc: core: Remove MMC_CLKGATE	2015-10-26 16:00:09 +01:00
host.c	mmc: core: Refactor code to register the MMC PM notifier	2015-12-22 11:32:04 +01:00
host.h	mmc: host: Add facility to support re-tuning	2015-06-01 09:06:53 +02:00
mmc.c	mmc: mmc: Fix incorrect use of driver strength switching HS200 and HS400	2015-12-22 11:32:13 +01:00
mmc_ops.c	mmc: mmc: extend the mmc_send_tuning()	2015-10-27 10:38:41 +01:00
mmc_ops.h	mmc: core: Convert __mmc_switch() into an internal core function	2015-10-26 15:59:54 +01:00
pwrseq.c	mmc: pwrseq: Fix error code propagation in mmc_pwrseq_simple_alloc()	2015-04-17 10:17:19 +02:00
pwrseq.h	mmc: pwrseq: constify mmc_pwrseq_ops structures	2015-12-22 11:32:07 +01:00
pwrseq_emmc.c	mmc: pwrseq: constify mmc_pwrseq_ops structures	2015-12-22 11:32:07 +01:00
pwrseq_simple.c	mmc: pwrseq: constify mmc_pwrseq_ops structures	2015-12-22 11:32:07 +01:00
quirks.c	mmc: core: Remove MMC_CLKGATE	2015-10-26 16:00:09 +01:00
sd.c	mmc: core: Make runtime resume default behavior for MMC/SD	2015-12-22 11:32:03 +01:00
sd.h	mmc: drop the speed mode of card's state	2014-05-12 18:05:53 -04:00
sd_ops.c	mmc: sd: warn if card stays busy during init	2014-07-09 11:26:07 +02:00
sd_ops.h	mmc: add erase, secure erase, trim and secure trim operations	2010-08-12 08:43:30 -07:00
sdio.c	mmc: sdio: Fix invalid vdd in voltage switch power cycle	2015-12-22 11:32:15 +01:00
sdio_bus.c	mmc: core: Attach PM domain prior probing of SDIO func driver	2015-06-04 10:03:51 +02:00
sdio_bus.h	mmc: basic SDIO device model	2007-09-23 19:45:31 +02:00
sdio_cis.c	mmc: sdio: Change pr_warning to pr_warn_ratelimited	2012-07-22 15:25:48 -04:00
sdio_cis.h	sdio: split up common and function CIS parsing	2007-09-23 20:44:22 +02:00
sdio_io.c	mmc: sdio: Use multiple scatter/gather list	2012-12-06 13:54:43 -05:00
sdio_irq.c	mmc: core: Remove MMC_CLKGATE	2015-10-26 16:00:09 +01:00
sdio_ops.c	mmc: sdio: Use multiple scatter/gather list	2012-12-06 13:54:43 -05:00
sdio_ops.h	mmc: Add mmc_is_io_op helper function	2015-10-26 16:00:01 +01:00
slot-gpio.c	mmc: slot-gpio: Allow host driver to provide isr for card-detect interrupts	2015-01-19 09:56:29 +01:00
slot-gpio.h	mmc: slot-gpio: Make mmc_gpio_alloc() available for MMC core	2015-01-19 09:56:17 +01:00