1639 lines
39 KiB
C
1639 lines
39 KiB
C
/*
|
|
* mackerel board support
|
|
*
|
|
* Copyright (C) 2010 Renesas Solutions Corp.
|
|
* Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
|
|
*
|
|
* based on ap4evb
|
|
* Copyright (C) 2010 Magnus Damm
|
|
* Copyright (C) 2008 Yoshihiro Shimoda
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; version 2 of the License.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
|
*/
|
|
#include <linux/delay.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/input.h>
|
|
#include <linux/io.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/leds.h>
|
|
#include <linux/mfd/tmio.h>
|
|
#include <linux/mmc/host.h>
|
|
#include <linux/mmc/sh_mmcif.h>
|
|
#include <linux/mmc/sh_mobile_sdhi.h>
|
|
#include <linux/mtd/mtd.h>
|
|
#include <linux/mtd/partitions.h>
|
|
#include <linux/mtd/physmap.h>
|
|
#include <linux/pm_clock.h>
|
|
#include <linux/smsc911x.h>
|
|
#include <linux/sh_intc.h>
|
|
#include <linux/tca6416_keypad.h>
|
|
#include <linux/usb/r8a66597.h>
|
|
#include <linux/usb/renesas_usbhs.h>
|
|
#include <linux/dma-mapping.h>
|
|
|
|
#include <video/sh_mobile_hdmi.h>
|
|
#include <video/sh_mobile_lcdc.h>
|
|
#include <media/sh_mobile_ceu.h>
|
|
#include <media/soc_camera.h>
|
|
#include <media/soc_camera_platform.h>
|
|
#include <sound/sh_fsi.h>
|
|
|
|
#include <mach/common.h>
|
|
#include <mach/sh7372.h>
|
|
|
|
#include <asm/mach/arch.h>
|
|
#include <asm/mach/time.h>
|
|
#include <asm/mach/map.h>
|
|
#include <asm/mach-types.h>
|
|
|
|
/*
|
|
* Address Interface BusWidth note
|
|
* ------------------------------------------------------------------
|
|
* 0x0000_0000 NOR Flash ROM (MCP) 16bit SW7 : bit1 = ON
|
|
* 0x0800_0000 user area -
|
|
* 0x1000_0000 NOR Flash ROM (MCP) 16bit SW7 : bit1 = OFF
|
|
* 0x1400_0000 Ether (LAN9220) 16bit
|
|
* 0x1600_0000 user area - cannot use with NAND
|
|
* 0x1800_0000 user area -
|
|
* 0x1A00_0000 -
|
|
* 0x4000_0000 LPDDR2-SDRAM (POP) 32bit
|
|
*/
|
|
|
|
/*
|
|
* CPU mode
|
|
*
|
|
* SW4 | Boot Area| Master | Remarks
|
|
* 1 | 2 | 3 | 4 | 5 | 6 | 8 | | Processor|
|
|
* ----+-----+-----+-----+-----+-----+-----+----------+----------+--------------
|
|
* ON | ON | OFF | ON | ON | OFF | OFF | External | System | External ROM
|
|
* ON | ON | ON | ON | ON | OFF | OFF | External | System | ROM Debug
|
|
* ON | ON | X | ON | OFF | OFF | OFF | Built-in | System | ROM Debug
|
|
* X | OFF | X | X | X | X | OFF | Built-in | System | MaskROM
|
|
* OFF | X | X | X | X | X | OFF | Built-in | System | MaskROM
|
|
* X | X | X | OFF | X | X | OFF | Built-in | System | MaskROM
|
|
* OFF | ON | OFF | X | X | OFF | ON | External | System | Standalone
|
|
* ON | OFF | OFF | X | X | OFF | ON | External | Realtime | Standalone
|
|
*/
|
|
|
|
/*
|
|
* NOR Flash ROM
|
|
*
|
|
* SW1 | SW2 | SW7 | NOR Flash ROM
|
|
* bit1 | bit1 bit2 | bit1 | Memory allocation
|
|
* ------+------------+------+------------------
|
|
* OFF | ON OFF | ON | Area 0
|
|
* OFF | ON OFF | OFF | Area 4
|
|
*/
|
|
|
|
/*
|
|
* SMSC 9220
|
|
*
|
|
* SW1 SMSC 9220
|
|
* -----------------------
|
|
* ON access disable
|
|
* OFF access enable
|
|
*/
|
|
|
|
/*
|
|
* NAND Flash ROM
|
|
*
|
|
* SW1 | SW2 | SW7 | NAND Flash ROM
|
|
* bit1 | bit1 bit2 | bit2 | Memory allocation
|
|
* ------+------------+------+------------------
|
|
* OFF | ON OFF | ON | FCE 0
|
|
* OFF | ON OFF | OFF | FCE 1
|
|
*/
|
|
|
|
/*
|
|
* External interrupt pin settings
|
|
*
|
|
* IRQX | pin setting | device | level
|
|
* ------+--------------------+--------------------+-------
|
|
* IRQ0 | ICR1A.IRQ0SA=0010 | SDHI2 card detect | Low
|
|
* IRQ6 | ICR1A.IRQ6SA=0011 | Ether(LAN9220) | High
|
|
* IRQ7 | ICR1A.IRQ7SA=0010 | LCD Touch Panel | Low
|
|
* IRQ8 | ICR2A.IRQ8SA=0010 | MMC/SD card detect | Low
|
|
* IRQ9 | ICR2A.IRQ9SA=0010 | KEY(TCA6408) | Low
|
|
* IRQ21 | ICR4A.IRQ21SA=0011 | Sensor(ADXL345) | High
|
|
* IRQ22 | ICR4A.IRQ22SA=0011 | Sensor(AK8975) | High
|
|
*/
|
|
|
|
/*
|
|
* USB
|
|
*
|
|
* USB0 : CN22 : Function
|
|
* USB1 : CN31 : Function/Host *1
|
|
*
|
|
* J30 (for CN31) *1
|
|
* ----------+---------------+-------------
|
|
* 1-2 short | VBUS 5V | Host
|
|
* open | external VBUS | Function
|
|
*
|
|
* *1
|
|
* CN31 is used as
|
|
* CONFIG_USB_R8A66597_HCD Host
|
|
* CONFIG_USB_RENESAS_USBHS Function
|
|
*
|
|
* CAUTION
|
|
*
|
|
* renesas_usbhs driver can use external interrupt mode
|
|
* (which come from USB-PHY) or autonomy mode (it use own interrupt)
|
|
* for detecting connection/disconnection when Function.
|
|
* USB will be power OFF while it has been disconnecting
|
|
* if external interrupt mode, and it is always power ON if autonomy mode,
|
|
*
|
|
* mackerel can not use external interrupt (IRQ7-PORT167) mode on "USB0",
|
|
* because Touchscreen is using IRQ7-PORT40.
|
|
* It is impossible to use IRQ7 demux on this board.
|
|
*
|
|
* We can use external interrupt mode USB-Function on "USB1".
|
|
* USB1 can become Host by r8a66597, and become Function by renesas_usbhs.
|
|
* But don't select both drivers in same time.
|
|
* These uses same IRQ number for request_irq(), and aren't supporting
|
|
* IRQF_SHARED / IORESOURCE_IRQ_SHAREABLE.
|
|
*
|
|
* Actually these are old/new version of USB driver.
|
|
* This mean its register will be broken if it supports shared IRQ,
|
|
*/
|
|
|
|
/*
|
|
* SDHI0 (CN12)
|
|
*
|
|
* SW56 : OFF
|
|
*
|
|
*/
|
|
|
|
/* MMC /SDHI1 (CN7)
|
|
*
|
|
* I/O voltage : 1.8v
|
|
*
|
|
* Power voltage : 1.8v or 3.3v
|
|
* J22 : select power voltage *1
|
|
* 1-2 pin : 1.8v
|
|
* 2-3 pin : 3.3v
|
|
*
|
|
* *1
|
|
* Please change J22 depends the card to be used.
|
|
* MMC's OCR field set to support either voltage for the card inserted.
|
|
*
|
|
* SW1 | SW33
|
|
* | bit1 | bit2 | bit3 | bit4
|
|
* -------------+------+------+------+-------
|
|
* MMC0 OFF | OFF | X | ON | X (Use MMCIF)
|
|
* SDHI1 OFF | ON | X | OFF | X (Use MFD_SH_MOBILE_SDHI)
|
|
*
|
|
*/
|
|
|
|
/*
|
|
* SDHI2 (CN23)
|
|
*
|
|
* microSD card sloct
|
|
*
|
|
*/
|
|
|
|
/*
|
|
* FIXME !!
|
|
*
|
|
* gpio_no_direction
|
|
* gpio_pull_down
|
|
* are quick_hack.
|
|
*
|
|
* current gpio frame work doesn't have
|
|
* the method to control only pull up/down/free.
|
|
* this function should be replaced by correct gpio function
|
|
*/
|
|
static void __init gpio_no_direction(u32 addr)
|
|
{
|
|
__raw_writeb(0x00, addr);
|
|
}
|
|
|
|
static void __init gpio_pull_down(u32 addr)
|
|
{
|
|
u8 data = __raw_readb(addr);
|
|
|
|
data &= 0x0F;
|
|
data |= 0xA0;
|
|
|
|
__raw_writeb(data, addr);
|
|
}
|
|
|
|
/* MTD */
|
|
static struct mtd_partition nor_flash_partitions[] = {
|
|
{
|
|
.name = "loader",
|
|
.offset = 0x00000000,
|
|
.size = 512 * 1024,
|
|
.mask_flags = MTD_WRITEABLE,
|
|
},
|
|
{
|
|
.name = "bootenv",
|
|
.offset = MTDPART_OFS_APPEND,
|
|
.size = 512 * 1024,
|
|
.mask_flags = MTD_WRITEABLE,
|
|
},
|
|
{
|
|
.name = "kernel_ro",
|
|
.offset = MTDPART_OFS_APPEND,
|
|
.size = 8 * 1024 * 1024,
|
|
.mask_flags = MTD_WRITEABLE,
|
|
},
|
|
{
|
|
.name = "kernel",
|
|
.offset = MTDPART_OFS_APPEND,
|
|
.size = 8 * 1024 * 1024,
|
|
},
|
|
{
|
|
.name = "data",
|
|
.offset = MTDPART_OFS_APPEND,
|
|
.size = MTDPART_SIZ_FULL,
|
|
},
|
|
};
|
|
|
|
static struct physmap_flash_data nor_flash_data = {
|
|
.width = 2,
|
|
.parts = nor_flash_partitions,
|
|
.nr_parts = ARRAY_SIZE(nor_flash_partitions),
|
|
};
|
|
|
|
static struct resource nor_flash_resources[] = {
|
|
[0] = {
|
|
.start = 0x20000000, /* CS0 shadow instead of regular CS0 */
|
|
.end = 0x28000000 - 1, /* needed by USB MASK ROM boot */
|
|
.flags = IORESOURCE_MEM,
|
|
}
|
|
};
|
|
|
|
static struct platform_device nor_flash_device = {
|
|
.name = "physmap-flash",
|
|
.dev = {
|
|
.platform_data = &nor_flash_data,
|
|
},
|
|
.num_resources = ARRAY_SIZE(nor_flash_resources),
|
|
.resource = nor_flash_resources,
|
|
};
|
|
|
|
/* SMSC */
|
|
static struct resource smc911x_resources[] = {
|
|
{
|
|
.start = 0x14000000,
|
|
.end = 0x16000000 - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
}, {
|
|
.start = evt2irq(0x02c0) /* IRQ6A */,
|
|
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
|
|
},
|
|
};
|
|
|
|
static struct smsc911x_platform_config smsc911x_info = {
|
|
.flags = SMSC911X_USE_16BIT | SMSC911X_SAVE_MAC_ADDRESS,
|
|
.irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
|
|
.irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
|
|
};
|
|
|
|
static struct platform_device smc911x_device = {
|
|
.name = "smsc911x",
|
|
.id = -1,
|
|
.num_resources = ARRAY_SIZE(smc911x_resources),
|
|
.resource = smc911x_resources,
|
|
.dev = {
|
|
.platform_data = &smsc911x_info,
|
|
},
|
|
};
|
|
|
|
/* MERAM */
|
|
static struct sh_mobile_meram_info mackerel_meram_info = {
|
|
.addr_mode = SH_MOBILE_MERAM_MODE1,
|
|
};
|
|
|
|
static struct resource meram_resources[] = {
|
|
[0] = {
|
|
.name = "MERAM",
|
|
.start = 0xe8000000,
|
|
.end = 0xe81fffff,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
};
|
|
|
|
static struct platform_device meram_device = {
|
|
.name = "sh_mobile_meram",
|
|
.id = 0,
|
|
.num_resources = ARRAY_SIZE(meram_resources),
|
|
.resource = meram_resources,
|
|
.dev = {
|
|
.platform_data = &mackerel_meram_info,
|
|
},
|
|
};
|
|
|
|
/* LCDC */
|
|
static struct fb_videomode mackerel_lcdc_modes[] = {
|
|
{
|
|
.name = "WVGA Panel",
|
|
.xres = 800,
|
|
.yres = 480,
|
|
.left_margin = 220,
|
|
.right_margin = 110,
|
|
.hsync_len = 70,
|
|
.upper_margin = 20,
|
|
.lower_margin = 5,
|
|
.vsync_len = 5,
|
|
.sync = 0,
|
|
},
|
|
};
|
|
|
|
static int mackerel_set_brightness(void *board_data, int brightness)
|
|
{
|
|
gpio_set_value(GPIO_PORT31, brightness);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mackerel_get_brightness(void *board_data)
|
|
{
|
|
return gpio_get_value(GPIO_PORT31);
|
|
}
|
|
|
|
static struct sh_mobile_meram_cfg lcd_meram_cfg = {
|
|
.icb[0] = {
|
|
.marker_icb = 28,
|
|
.cache_icb = 24,
|
|
.meram_offset = 0x0,
|
|
.meram_size = 0x40,
|
|
},
|
|
.icb[1] = {
|
|
.marker_icb = 29,
|
|
.cache_icb = 25,
|
|
.meram_offset = 0x40,
|
|
.meram_size = 0x40,
|
|
},
|
|
};
|
|
|
|
static struct sh_mobile_lcdc_info lcdc_info = {
|
|
.meram_dev = &mackerel_meram_info,
|
|
.clock_source = LCDC_CLK_BUS,
|
|
.ch[0] = {
|
|
.chan = LCDC_CHAN_MAINLCD,
|
|
.bpp = 16,
|
|
.lcd_cfg = mackerel_lcdc_modes,
|
|
.num_cfg = ARRAY_SIZE(mackerel_lcdc_modes),
|
|
.interface_type = RGB24,
|
|
.clock_divider = 3,
|
|
.flags = 0,
|
|
.lcd_size_cfg.width = 152,
|
|
.lcd_size_cfg.height = 91,
|
|
.board_cfg = {
|
|
.set_brightness = mackerel_set_brightness,
|
|
.get_brightness = mackerel_get_brightness,
|
|
},
|
|
.bl_info = {
|
|
.name = "sh_mobile_lcdc_bl",
|
|
.max_brightness = 1,
|
|
},
|
|
.meram_cfg = &lcd_meram_cfg,
|
|
}
|
|
};
|
|
|
|
static struct resource lcdc_resources[] = {
|
|
[0] = {
|
|
.name = "LCDC",
|
|
.start = 0xfe940000,
|
|
.end = 0xfe943fff,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = intcs_evt2irq(0x580),
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct platform_device lcdc_device = {
|
|
.name = "sh_mobile_lcdc_fb",
|
|
.num_resources = ARRAY_SIZE(lcdc_resources),
|
|
.resource = lcdc_resources,
|
|
.dev = {
|
|
.platform_data = &lcdc_info,
|
|
.coherent_dma_mask = ~0,
|
|
},
|
|
};
|
|
|
|
static struct sh_mobile_meram_cfg hdmi_meram_cfg = {
|
|
.icb[0] = {
|
|
.marker_icb = 30,
|
|
.cache_icb = 26,
|
|
.meram_offset = 0x80,
|
|
.meram_size = 0x100,
|
|
},
|
|
.icb[1] = {
|
|
.marker_icb = 31,
|
|
.cache_icb = 27,
|
|
.meram_offset = 0x180,
|
|
.meram_size = 0x100,
|
|
},
|
|
};
|
|
/* HDMI */
|
|
static struct sh_mobile_lcdc_info hdmi_lcdc_info = {
|
|
.meram_dev = &mackerel_meram_info,
|
|
.clock_source = LCDC_CLK_EXTERNAL,
|
|
.ch[0] = {
|
|
.chan = LCDC_CHAN_MAINLCD,
|
|
.bpp = 16,
|
|
.interface_type = RGB24,
|
|
.clock_divider = 1,
|
|
.flags = LCDC_FLAGS_DWPOL,
|
|
.meram_cfg = &hdmi_meram_cfg,
|
|
}
|
|
};
|
|
|
|
static struct resource hdmi_lcdc_resources[] = {
|
|
[0] = {
|
|
.name = "LCDC1",
|
|
.start = 0xfe944000,
|
|
.end = 0xfe947fff,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = intcs_evt2irq(0x1780),
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct platform_device hdmi_lcdc_device = {
|
|
.name = "sh_mobile_lcdc_fb",
|
|
.num_resources = ARRAY_SIZE(hdmi_lcdc_resources),
|
|
.resource = hdmi_lcdc_resources,
|
|
.id = 1,
|
|
.dev = {
|
|
.platform_data = &hdmi_lcdc_info,
|
|
.coherent_dma_mask = ~0,
|
|
},
|
|
};
|
|
|
|
static struct sh_mobile_hdmi_info hdmi_info = {
|
|
.lcd_chan = &hdmi_lcdc_info.ch[0],
|
|
.lcd_dev = &hdmi_lcdc_device.dev,
|
|
.flags = HDMI_SND_SRC_SPDIF,
|
|
};
|
|
|
|
static struct resource hdmi_resources[] = {
|
|
[0] = {
|
|
.name = "HDMI",
|
|
.start = 0xe6be0000,
|
|
.end = 0xe6be00ff,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
/* There's also an HDMI interrupt on INTCS @ 0x18e0 */
|
|
.start = evt2irq(0x17e0),
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct platform_device hdmi_device = {
|
|
.name = "sh-mobile-hdmi",
|
|
.num_resources = ARRAY_SIZE(hdmi_resources),
|
|
.resource = hdmi_resources,
|
|
.id = -1,
|
|
.dev = {
|
|
.platform_data = &hdmi_info,
|
|
},
|
|
};
|
|
|
|
static struct platform_device fsi_hdmi_device = {
|
|
.name = "sh_fsi2_b_hdmi",
|
|
};
|
|
|
|
static void __init hdmi_init_pm_clock(void)
|
|
{
|
|
struct clk *hdmi_ick = clk_get(&hdmi_device.dev, "ick");
|
|
int ret;
|
|
long rate;
|
|
|
|
if (IS_ERR(hdmi_ick)) {
|
|
ret = PTR_ERR(hdmi_ick);
|
|
pr_err("Cannot get HDMI ICK: %d\n", ret);
|
|
goto out;
|
|
}
|
|
|
|
ret = clk_set_parent(&sh7372_pllc2_clk, &sh7372_dv_clki_div2_clk);
|
|
if (ret < 0) {
|
|
pr_err("Cannot set PLLC2 parent: %d, %d users\n",
|
|
ret, sh7372_pllc2_clk.usecount);
|
|
goto out;
|
|
}
|
|
|
|
pr_debug("PLLC2 initial frequency %lu\n",
|
|
clk_get_rate(&sh7372_pllc2_clk));
|
|
|
|
rate = clk_round_rate(&sh7372_pllc2_clk, 594000000);
|
|
if (rate < 0) {
|
|
pr_err("Cannot get suitable rate: %ld\n", rate);
|
|
ret = rate;
|
|
goto out;
|
|
}
|
|
|
|
ret = clk_set_rate(&sh7372_pllc2_clk, rate);
|
|
if (ret < 0) {
|
|
pr_err("Cannot set rate %ld: %d\n", rate, ret);
|
|
goto out;
|
|
}
|
|
|
|
pr_debug("PLLC2 set frequency %lu\n", rate);
|
|
|
|
ret = clk_set_parent(hdmi_ick, &sh7372_pllc2_clk);
|
|
if (ret < 0)
|
|
pr_err("Cannot set HDMI parent: %d\n", ret);
|
|
|
|
out:
|
|
if (!IS_ERR(hdmi_ick))
|
|
clk_put(hdmi_ick);
|
|
}
|
|
|
|
/* USBHS0 is connected to CN22 which takes a USB Mini-B plug
|
|
*
|
|
* The sh7372 SoC has IRQ7 set aside for USBHS0 hotplug,
|
|
* but on this particular board IRQ7 is already used by
|
|
* the touch screen. This leaves us with software polling.
|
|
*/
|
|
#define USBHS0_POLL_INTERVAL (HZ * 5)
|
|
|
|
struct usbhs_private {
|
|
unsigned int usbphyaddr;
|
|
unsigned int usbcrcaddr;
|
|
struct renesas_usbhs_platform_info info;
|
|
struct delayed_work work;
|
|
struct platform_device *pdev;
|
|
};
|
|
|
|
#define usbhs_get_priv(pdev) \
|
|
container_of(renesas_usbhs_get_info(pdev), \
|
|
struct usbhs_private, info)
|
|
|
|
#define usbhs_is_connected(priv) \
|
|
(!((1 << 7) & __raw_readw(priv->usbcrcaddr)))
|
|
|
|
static int usbhs_get_vbus(struct platform_device *pdev)
|
|
{
|
|
return usbhs_is_connected(usbhs_get_priv(pdev));
|
|
}
|
|
|
|
static void usbhs_phy_reset(struct platform_device *pdev)
|
|
{
|
|
struct usbhs_private *priv = usbhs_get_priv(pdev);
|
|
|
|
/* init phy */
|
|
__raw_writew(0x8a0a, priv->usbcrcaddr);
|
|
}
|
|
|
|
static int usbhs0_get_id(struct platform_device *pdev)
|
|
{
|
|
return USBHS_GADGET;
|
|
}
|
|
|
|
static void usbhs0_work_function(struct work_struct *work)
|
|
{
|
|
struct usbhs_private *priv = container_of(work, struct usbhs_private,
|
|
work.work);
|
|
|
|
renesas_usbhs_call_notify_hotplug(priv->pdev);
|
|
schedule_delayed_work(&priv->work, USBHS0_POLL_INTERVAL);
|
|
}
|
|
|
|
static int usbhs0_hardware_init(struct platform_device *pdev)
|
|
{
|
|
struct usbhs_private *priv = usbhs_get_priv(pdev);
|
|
|
|
priv->pdev = pdev;
|
|
INIT_DELAYED_WORK(&priv->work, usbhs0_work_function);
|
|
schedule_delayed_work(&priv->work, USBHS0_POLL_INTERVAL);
|
|
return 0;
|
|
}
|
|
|
|
static void usbhs0_hardware_exit(struct platform_device *pdev)
|
|
{
|
|
struct usbhs_private *priv = usbhs_get_priv(pdev);
|
|
|
|
cancel_delayed_work_sync(&priv->work);
|
|
}
|
|
|
|
static struct usbhs_private usbhs0_private = {
|
|
.usbcrcaddr = 0xe605810c, /* USBCR2 */
|
|
.info = {
|
|
.platform_callback = {
|
|
.hardware_init = usbhs0_hardware_init,
|
|
.hardware_exit = usbhs0_hardware_exit,
|
|
.phy_reset = usbhs_phy_reset,
|
|
.get_id = usbhs0_get_id,
|
|
.get_vbus = usbhs_get_vbus,
|
|
},
|
|
.driver_param = {
|
|
.buswait_bwait = 4,
|
|
.d0_tx_id = SHDMA_SLAVE_USB0_TX,
|
|
.d1_rx_id = SHDMA_SLAVE_USB0_RX,
|
|
},
|
|
},
|
|
};
|
|
|
|
static struct resource usbhs0_resources[] = {
|
|
[0] = {
|
|
.name = "USBHS0",
|
|
.start = 0xe6890000,
|
|
.end = 0xe68900e6 - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = evt2irq(0x1ca0) /* USB0_USB0I0 */,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct platform_device usbhs0_device = {
|
|
.name = "renesas_usbhs",
|
|
.id = 0,
|
|
.dev = {
|
|
.platform_data = &usbhs0_private.info,
|
|
},
|
|
.num_resources = ARRAY_SIZE(usbhs0_resources),
|
|
.resource = usbhs0_resources,
|
|
};
|
|
|
|
/* USBHS1 is connected to CN31 which takes a USB Mini-AB plug
|
|
*
|
|
* Use J30 to select between Host and Function. This setting
|
|
* can however not be detected by software. Hotplug of USBHS1
|
|
* is provided via IRQ8.
|
|
*/
|
|
#define IRQ8 evt2irq(0x0300)
|
|
|
|
/* USBHS1 USB Host support via r8a66597_hcd */
|
|
static void usb1_host_port_power(int port, int power)
|
|
{
|
|
if (!power) /* only power-on is supported for now */
|
|
return;
|
|
|
|
/* set VBOUT/PWEN and EXTLP1 in DVSTCTR */
|
|
__raw_writew(__raw_readw(0xE68B0008) | 0x600, 0xE68B0008);
|
|
}
|
|
|
|
static struct r8a66597_platdata usb1_host_data = {
|
|
.on_chip = 1,
|
|
.port_power = usb1_host_port_power,
|
|
};
|
|
|
|
static struct resource usb1_host_resources[] = {
|
|
[0] = {
|
|
.name = "USBHS1",
|
|
.start = 0xe68b0000,
|
|
.end = 0xe68b00e6 - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = evt2irq(0x1ce0) /* USB1_USB1I0 */,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct platform_device usb1_host_device = {
|
|
.name = "r8a66597_hcd",
|
|
.id = 1,
|
|
.dev = {
|
|
.dma_mask = NULL, /* not use dma */
|
|
.coherent_dma_mask = 0xffffffff,
|
|
.platform_data = &usb1_host_data,
|
|
},
|
|
.num_resources = ARRAY_SIZE(usb1_host_resources),
|
|
.resource = usb1_host_resources,
|
|
};
|
|
|
|
/* USBHS1 USB Function support via renesas_usbhs */
|
|
|
|
#define USB_PHY_MODE (1 << 4)
|
|
#define USB_PHY_INT_EN ((1 << 3) | (1 << 2))
|
|
#define USB_PHY_ON (1 << 1)
|
|
#define USB_PHY_OFF (1 << 0)
|
|
#define USB_PHY_INT_CLR (USB_PHY_ON | USB_PHY_OFF)
|
|
|
|
static irqreturn_t usbhs1_interrupt(int irq, void *data)
|
|
{
|
|
struct platform_device *pdev = data;
|
|
struct usbhs_private *priv = usbhs_get_priv(pdev);
|
|
|
|
dev_dbg(&pdev->dev, "%s\n", __func__);
|
|
|
|
renesas_usbhs_call_notify_hotplug(pdev);
|
|
|
|
/* clear status */
|
|
__raw_writew(__raw_readw(priv->usbphyaddr) | USB_PHY_INT_CLR,
|
|
priv->usbphyaddr);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int usbhs1_hardware_init(struct platform_device *pdev)
|
|
{
|
|
struct usbhs_private *priv = usbhs_get_priv(pdev);
|
|
int ret;
|
|
|
|
/* clear interrupt status */
|
|
__raw_writew(USB_PHY_MODE | USB_PHY_INT_CLR, priv->usbphyaddr);
|
|
|
|
ret = request_irq(IRQ8, usbhs1_interrupt, IRQF_TRIGGER_HIGH,
|
|
dev_name(&pdev->dev), pdev);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "request_irq err\n");
|
|
return ret;
|
|
}
|
|
|
|
/* enable USB phy interrupt */
|
|
__raw_writew(USB_PHY_MODE | USB_PHY_INT_EN, priv->usbphyaddr);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void usbhs1_hardware_exit(struct platform_device *pdev)
|
|
{
|
|
struct usbhs_private *priv = usbhs_get_priv(pdev);
|
|
|
|
/* clear interrupt status */
|
|
__raw_writew(USB_PHY_MODE | USB_PHY_INT_CLR, priv->usbphyaddr);
|
|
|
|
free_irq(IRQ8, pdev);
|
|
}
|
|
|
|
static int usbhs1_get_id(struct platform_device *pdev)
|
|
{
|
|
return USBHS_GADGET;
|
|
}
|
|
|
|
static u32 usbhs1_pipe_cfg[] = {
|
|
USB_ENDPOINT_XFER_CONTROL,
|
|
USB_ENDPOINT_XFER_ISOC,
|
|
USB_ENDPOINT_XFER_ISOC,
|
|
USB_ENDPOINT_XFER_BULK,
|
|
USB_ENDPOINT_XFER_BULK,
|
|
USB_ENDPOINT_XFER_BULK,
|
|
USB_ENDPOINT_XFER_INT,
|
|
USB_ENDPOINT_XFER_INT,
|
|
USB_ENDPOINT_XFER_INT,
|
|
USB_ENDPOINT_XFER_BULK,
|
|
USB_ENDPOINT_XFER_BULK,
|
|
USB_ENDPOINT_XFER_BULK,
|
|
USB_ENDPOINT_XFER_BULK,
|
|
USB_ENDPOINT_XFER_BULK,
|
|
USB_ENDPOINT_XFER_BULK,
|
|
USB_ENDPOINT_XFER_BULK,
|
|
};
|
|
|
|
static struct usbhs_private usbhs1_private = {
|
|
.usbphyaddr = 0xe60581e2, /* USBPHY1INTAP */
|
|
.usbcrcaddr = 0xe6058130, /* USBCR4 */
|
|
.info = {
|
|
.platform_callback = {
|
|
.hardware_init = usbhs1_hardware_init,
|
|
.hardware_exit = usbhs1_hardware_exit,
|
|
.get_id = usbhs1_get_id,
|
|
.phy_reset = usbhs_phy_reset,
|
|
.get_vbus = usbhs_get_vbus,
|
|
},
|
|
.driver_param = {
|
|
.buswait_bwait = 4,
|
|
.has_otg = 1,
|
|
.pipe_type = usbhs1_pipe_cfg,
|
|
.pipe_size = ARRAY_SIZE(usbhs1_pipe_cfg),
|
|
.d0_tx_id = SHDMA_SLAVE_USB1_TX,
|
|
.d1_rx_id = SHDMA_SLAVE_USB1_RX,
|
|
},
|
|
},
|
|
};
|
|
|
|
static struct resource usbhs1_resources[] = {
|
|
[0] = {
|
|
.name = "USBHS1",
|
|
.start = 0xe68b0000,
|
|
.end = 0xe68b00e6 - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = evt2irq(0x1ce0) /* USB1_USB1I0 */,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct platform_device usbhs1_device = {
|
|
.name = "renesas_usbhs",
|
|
.id = 1,
|
|
.dev = {
|
|
.platform_data = &usbhs1_private.info,
|
|
},
|
|
.num_resources = ARRAY_SIZE(usbhs1_resources),
|
|
.resource = usbhs1_resources,
|
|
};
|
|
|
|
/* LED */
|
|
static struct gpio_led mackerel_leds[] = {
|
|
{
|
|
.name = "led0",
|
|
.gpio = GPIO_PORT0,
|
|
.default_state = LEDS_GPIO_DEFSTATE_ON,
|
|
},
|
|
{
|
|
.name = "led1",
|
|
.gpio = GPIO_PORT1,
|
|
.default_state = LEDS_GPIO_DEFSTATE_ON,
|
|
},
|
|
{
|
|
.name = "led2",
|
|
.gpio = GPIO_PORT2,
|
|
.default_state = LEDS_GPIO_DEFSTATE_ON,
|
|
},
|
|
{
|
|
.name = "led3",
|
|
.gpio = GPIO_PORT159,
|
|
.default_state = LEDS_GPIO_DEFSTATE_ON,
|
|
}
|
|
};
|
|
|
|
static struct gpio_led_platform_data mackerel_leds_pdata = {
|
|
.leds = mackerel_leds,
|
|
.num_leds = ARRAY_SIZE(mackerel_leds),
|
|
};
|
|
|
|
static struct platform_device leds_device = {
|
|
.name = "leds-gpio",
|
|
.id = 0,
|
|
.dev = {
|
|
.platform_data = &mackerel_leds_pdata,
|
|
},
|
|
};
|
|
|
|
/* FSI */
|
|
#define IRQ_FSI evt2irq(0x1840)
|
|
static int __fsi_set_round_rate(struct clk *clk, long rate, int enable)
|
|
{
|
|
int ret;
|
|
|
|
if (rate <= 0)
|
|
return 0;
|
|
|
|
if (!enable) {
|
|
clk_disable(clk);
|
|
return 0;
|
|
}
|
|
|
|
ret = clk_set_rate(clk, clk_round_rate(clk, rate));
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return clk_enable(clk);
|
|
}
|
|
|
|
static int fsi_set_rate(struct device *dev, int is_porta, int rate, int enable)
|
|
{
|
|
struct clk *fsib_clk;
|
|
struct clk *fdiv_clk = &sh7372_fsidivb_clk;
|
|
long fsib_rate = 0;
|
|
long fdiv_rate = 0;
|
|
int ackmd_bpfmd;
|
|
int ret;
|
|
|
|
/* FSIA is slave mode. nothing to do here */
|
|
if (is_porta)
|
|
return 0;
|
|
|
|
/* clock start */
|
|
switch (rate) {
|
|
case 44100:
|
|
fsib_rate = rate * 256;
|
|
ackmd_bpfmd = SH_FSI_ACKMD_256 | SH_FSI_BPFMD_64;
|
|
break;
|
|
case 48000:
|
|
fsib_rate = 85428000; /* around 48kHz x 256 x 7 */
|
|
fdiv_rate = rate * 256;
|
|
ackmd_bpfmd = SH_FSI_ACKMD_256 | SH_FSI_BPFMD_64;
|
|
break;
|
|
default:
|
|
pr_err("unsupported rate in FSI2 port B\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* FSI B setting */
|
|
fsib_clk = clk_get(dev, "ickb");
|
|
if (IS_ERR(fsib_clk))
|
|
return -EIO;
|
|
|
|
/* fsib */
|
|
ret = __fsi_set_round_rate(fsib_clk, fsib_rate, enable);
|
|
if (ret < 0)
|
|
goto fsi_set_rate_end;
|
|
|
|
/* FSI DIV */
|
|
ret = __fsi_set_round_rate(fdiv_clk, fdiv_rate, enable);
|
|
if (ret < 0) {
|
|
/* disable FSI B */
|
|
if (enable)
|
|
__fsi_set_round_rate(fsib_clk, fsib_rate, 0);
|
|
goto fsi_set_rate_end;
|
|
}
|
|
|
|
ret = ackmd_bpfmd;
|
|
|
|
fsi_set_rate_end:
|
|
clk_put(fsib_clk);
|
|
return ret;
|
|
}
|
|
|
|
static struct sh_fsi_platform_info fsi_info = {
|
|
.porta_flags = SH_FSI_BRS_INV,
|
|
|
|
.portb_flags = SH_FSI_BRS_INV |
|
|
SH_FSI_BRM_INV |
|
|
SH_FSI_LRS_INV |
|
|
SH_FSI_FMT_SPDIF,
|
|
|
|
.set_rate = fsi_set_rate,
|
|
};
|
|
|
|
static struct resource fsi_resources[] = {
|
|
[0] = {
|
|
.name = "FSI",
|
|
.start = 0xFE3C0000,
|
|
.end = 0xFE3C0400 - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = IRQ_FSI,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct platform_device fsi_device = {
|
|
.name = "sh_fsi2",
|
|
.id = -1,
|
|
.num_resources = ARRAY_SIZE(fsi_resources),
|
|
.resource = fsi_resources,
|
|
.dev = {
|
|
.platform_data = &fsi_info,
|
|
},
|
|
};
|
|
|
|
static struct platform_device fsi_ak4643_device = {
|
|
.name = "sh_fsi2_a_ak4643",
|
|
};
|
|
|
|
/*
|
|
* The card detect pin of the top SD/MMC slot (CN7) is active low and is
|
|
* connected to GPIO A22 of SH7372 (GPIO_PORT41).
|
|
*/
|
|
static int slot_cn7_get_cd(struct platform_device *pdev)
|
|
{
|
|
return !gpio_get_value(GPIO_PORT41);
|
|
}
|
|
|
|
/* SDHI0 */
|
|
static irqreturn_t mackerel_sdhi0_gpio_cd(int irq, void *arg)
|
|
{
|
|
struct device *dev = arg;
|
|
struct sh_mobile_sdhi_info *info = dev->platform_data;
|
|
struct tmio_mmc_data *pdata = info->pdata;
|
|
|
|
tmio_mmc_cd_wakeup(pdata);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static struct sh_mobile_sdhi_info sdhi0_info = {
|
|
.dma_slave_tx = SHDMA_SLAVE_SDHI0_TX,
|
|
.dma_slave_rx = SHDMA_SLAVE_SDHI0_RX,
|
|
.tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ,
|
|
};
|
|
|
|
static struct resource sdhi0_resources[] = {
|
|
[0] = {
|
|
.name = "SDHI0",
|
|
.start = 0xe6850000,
|
|
.end = 0xe68500ff,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = evt2irq(0x0e00) /* SDHI0_SDHI0I0 */,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
[2] = {
|
|
.start = evt2irq(0x0e20) /* SDHI0_SDHI0I1 */,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
[3] = {
|
|
.start = evt2irq(0x0e40) /* SDHI0_SDHI0I2 */,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct platform_device sdhi0_device = {
|
|
.name = "sh_mobile_sdhi",
|
|
.num_resources = ARRAY_SIZE(sdhi0_resources),
|
|
.resource = sdhi0_resources,
|
|
.id = 0,
|
|
.dev = {
|
|
.platform_data = &sdhi0_info,
|
|
},
|
|
};
|
|
|
|
#if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE)
|
|
/* SDHI1 */
|
|
static struct sh_mobile_sdhi_info sdhi1_info = {
|
|
.dma_slave_tx = SHDMA_SLAVE_SDHI1_TX,
|
|
.dma_slave_rx = SHDMA_SLAVE_SDHI1_RX,
|
|
.tmio_ocr_mask = MMC_VDD_165_195,
|
|
.tmio_flags = TMIO_MMC_WRPROTECT_DISABLE,
|
|
.tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |
|
|
MMC_CAP_NEEDS_POLL,
|
|
.get_cd = slot_cn7_get_cd,
|
|
};
|
|
|
|
static struct resource sdhi1_resources[] = {
|
|
[0] = {
|
|
.name = "SDHI1",
|
|
.start = 0xe6860000,
|
|
.end = 0xe68600ff,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.name = SH_MOBILE_SDHI_IRQ_CARD_DETECT,
|
|
.start = evt2irq(0x0e80), /* SDHI1_SDHI1I0 */
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
[2] = {
|
|
.name = SH_MOBILE_SDHI_IRQ_SDCARD,
|
|
.start = evt2irq(0x0ea0), /* SDHI1_SDHI1I1 */
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
[3] = {
|
|
.name = SH_MOBILE_SDHI_IRQ_SDIO,
|
|
.start = evt2irq(0x0ec0), /* SDHI1_SDHI1I2 */
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct platform_device sdhi1_device = {
|
|
.name = "sh_mobile_sdhi",
|
|
.num_resources = ARRAY_SIZE(sdhi1_resources),
|
|
.resource = sdhi1_resources,
|
|
.id = 1,
|
|
.dev = {
|
|
.platform_data = &sdhi1_info,
|
|
},
|
|
};
|
|
#endif
|
|
|
|
/*
|
|
* The card detect pin of the top SD/MMC slot (CN23) is active low and is
|
|
* connected to GPIO SCIFB_SCK of SH7372 (GPIO_PORT162).
|
|
*/
|
|
static int slot_cn23_get_cd(struct platform_device *pdev)
|
|
{
|
|
return !gpio_get_value(GPIO_PORT162);
|
|
}
|
|
|
|
/* SDHI2 */
|
|
static struct sh_mobile_sdhi_info sdhi2_info = {
|
|
.dma_slave_tx = SHDMA_SLAVE_SDHI2_TX,
|
|
.dma_slave_rx = SHDMA_SLAVE_SDHI2_RX,
|
|
.tmio_flags = TMIO_MMC_WRPROTECT_DISABLE,
|
|
.tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |
|
|
MMC_CAP_NEEDS_POLL,
|
|
.get_cd = slot_cn23_get_cd,
|
|
};
|
|
|
|
static struct resource sdhi2_resources[] = {
|
|
[0] = {
|
|
.name = "SDHI2",
|
|
.start = 0xe6870000,
|
|
.end = 0xe68700ff,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.name = SH_MOBILE_SDHI_IRQ_CARD_DETECT,
|
|
.start = evt2irq(0x1200), /* SDHI2_SDHI2I0 */
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
[2] = {
|
|
.name = SH_MOBILE_SDHI_IRQ_SDCARD,
|
|
.start = evt2irq(0x1220), /* SDHI2_SDHI2I1 */
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
[3] = {
|
|
.name = SH_MOBILE_SDHI_IRQ_SDIO,
|
|
.start = evt2irq(0x1240), /* SDHI2_SDHI2I2 */
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct platform_device sdhi2_device = {
|
|
.name = "sh_mobile_sdhi",
|
|
.num_resources = ARRAY_SIZE(sdhi2_resources),
|
|
.resource = sdhi2_resources,
|
|
.id = 2,
|
|
.dev = {
|
|
.platform_data = &sdhi2_info,
|
|
},
|
|
};
|
|
|
|
/* SH_MMCIF */
|
|
static struct resource sh_mmcif_resources[] = {
|
|
[0] = {
|
|
.name = "MMCIF",
|
|
.start = 0xE6BD0000,
|
|
.end = 0xE6BD00FF,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
/* MMC ERR */
|
|
.start = evt2irq(0x1ac0),
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
[2] = {
|
|
/* MMC NOR */
|
|
.start = evt2irq(0x1ae0),
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct sh_mmcif_dma sh_mmcif_dma = {
|
|
.chan_priv_rx = {
|
|
.slave_id = SHDMA_SLAVE_MMCIF_RX,
|
|
},
|
|
.chan_priv_tx = {
|
|
.slave_id = SHDMA_SLAVE_MMCIF_TX,
|
|
},
|
|
};
|
|
|
|
static struct sh_mmcif_plat_data sh_mmcif_plat = {
|
|
.sup_pclk = 0,
|
|
.ocr = MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34,
|
|
.caps = MMC_CAP_4_BIT_DATA |
|
|
MMC_CAP_8_BIT_DATA |
|
|
MMC_CAP_NEEDS_POLL,
|
|
.get_cd = slot_cn7_get_cd,
|
|
.dma = &sh_mmcif_dma,
|
|
};
|
|
|
|
static struct platform_device sh_mmcif_device = {
|
|
.name = "sh_mmcif",
|
|
.id = 0,
|
|
.dev = {
|
|
.dma_mask = NULL,
|
|
.coherent_dma_mask = 0xffffffff,
|
|
.platform_data = &sh_mmcif_plat,
|
|
},
|
|
.num_resources = ARRAY_SIZE(sh_mmcif_resources),
|
|
.resource = sh_mmcif_resources,
|
|
};
|
|
|
|
|
|
static int mackerel_camera_add(struct soc_camera_device *icd);
|
|
static void mackerel_camera_del(struct soc_camera_device *icd);
|
|
|
|
static int camera_set_capture(struct soc_camera_platform_info *info,
|
|
int enable)
|
|
{
|
|
return 0; /* camera sensor always enabled */
|
|
}
|
|
|
|
static struct soc_camera_platform_info camera_info = {
|
|
.format_name = "UYVY",
|
|
.format_depth = 16,
|
|
.format = {
|
|
.code = V4L2_MBUS_FMT_UYVY8_2X8,
|
|
.colorspace = V4L2_COLORSPACE_SMPTE170M,
|
|
.field = V4L2_FIELD_NONE,
|
|
.width = 640,
|
|
.height = 480,
|
|
},
|
|
.mbus_param = V4L2_MBUS_PCLK_SAMPLE_RISING | V4L2_MBUS_MASTER |
|
|
V4L2_MBUS_VSYNC_ACTIVE_HIGH | V4L2_MBUS_HSYNC_ACTIVE_HIGH |
|
|
V4L2_MBUS_DATA_ACTIVE_HIGH,
|
|
.mbus_type = V4L2_MBUS_PARALLEL,
|
|
.set_capture = camera_set_capture,
|
|
};
|
|
|
|
static struct soc_camera_link camera_link = {
|
|
.bus_id = 0,
|
|
.add_device = mackerel_camera_add,
|
|
.del_device = mackerel_camera_del,
|
|
.module_name = "soc_camera_platform",
|
|
.priv = &camera_info,
|
|
};
|
|
|
|
static struct platform_device *camera_device;
|
|
|
|
static void mackerel_camera_release(struct device *dev)
|
|
{
|
|
soc_camera_platform_release(&camera_device);
|
|
}
|
|
|
|
static int mackerel_camera_add(struct soc_camera_device *icd)
|
|
{
|
|
return soc_camera_platform_add(icd, &camera_device, &camera_link,
|
|
mackerel_camera_release, 0);
|
|
}
|
|
|
|
static void mackerel_camera_del(struct soc_camera_device *icd)
|
|
{
|
|
soc_camera_platform_del(icd, camera_device, &camera_link);
|
|
}
|
|
|
|
static struct sh_mobile_ceu_info sh_mobile_ceu_info = {
|
|
.flags = SH_CEU_FLAG_USE_8BIT_BUS,
|
|
};
|
|
|
|
static struct resource ceu_resources[] = {
|
|
[0] = {
|
|
.name = "CEU",
|
|
.start = 0xfe910000,
|
|
.end = 0xfe91009f,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = intcs_evt2irq(0x880),
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
[2] = {
|
|
/* place holder for contiguous memory */
|
|
},
|
|
};
|
|
|
|
static struct platform_device ceu_device = {
|
|
.name = "sh_mobile_ceu",
|
|
.id = 0, /* "ceu0" clock */
|
|
.num_resources = ARRAY_SIZE(ceu_resources),
|
|
.resource = ceu_resources,
|
|
.dev = {
|
|
.platform_data = &sh_mobile_ceu_info,
|
|
.coherent_dma_mask = 0xffffffff,
|
|
},
|
|
};
|
|
|
|
static struct platform_device mackerel_camera = {
|
|
.name = "soc-camera-pdrv",
|
|
.id = 0,
|
|
.dev = {
|
|
.platform_data = &camera_link,
|
|
},
|
|
};
|
|
|
|
static struct platform_device *mackerel_devices[] __initdata = {
|
|
&nor_flash_device,
|
|
&smc911x_device,
|
|
&lcdc_device,
|
|
&usb1_host_device,
|
|
&usbhs1_device,
|
|
&usbhs0_device,
|
|
&leds_device,
|
|
&fsi_device,
|
|
&fsi_ak4643_device,
|
|
&fsi_hdmi_device,
|
|
&sdhi0_device,
|
|
#if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE)
|
|
&sdhi1_device,
|
|
#endif
|
|
&sdhi2_device,
|
|
&sh_mmcif_device,
|
|
&ceu_device,
|
|
&mackerel_camera,
|
|
&hdmi_lcdc_device,
|
|
&hdmi_device,
|
|
&meram_device,
|
|
};
|
|
|
|
/* Keypad Initialization */
|
|
#define KEYPAD_BUTTON(ev_type, ev_code, act_low) \
|
|
{ \
|
|
.type = ev_type, \
|
|
.code = ev_code, \
|
|
.active_low = act_low, \
|
|
}
|
|
|
|
#define KEYPAD_BUTTON_LOW(event_code) KEYPAD_BUTTON(EV_KEY, event_code, 1)
|
|
|
|
static struct tca6416_button mackerel_gpio_keys[] = {
|
|
KEYPAD_BUTTON_LOW(KEY_HOME),
|
|
KEYPAD_BUTTON_LOW(KEY_MENU),
|
|
KEYPAD_BUTTON_LOW(KEY_BACK),
|
|
KEYPAD_BUTTON_LOW(KEY_POWER),
|
|
};
|
|
|
|
static struct tca6416_keys_platform_data mackerel_tca6416_keys_info = {
|
|
.buttons = mackerel_gpio_keys,
|
|
.nbuttons = ARRAY_SIZE(mackerel_gpio_keys),
|
|
.rep = 1,
|
|
.use_polling = 0,
|
|
.pinmask = 0x000F,
|
|
};
|
|
|
|
/* I2C */
|
|
#define IRQ7 evt2irq(0x02e0)
|
|
#define IRQ9 evt2irq(0x0320)
|
|
|
|
static struct i2c_board_info i2c0_devices[] = {
|
|
{
|
|
I2C_BOARD_INFO("ak4643", 0x13),
|
|
},
|
|
/* Keypad */
|
|
{
|
|
I2C_BOARD_INFO("tca6408-keys", 0x20),
|
|
.platform_data = &mackerel_tca6416_keys_info,
|
|
.irq = IRQ9,
|
|
},
|
|
/* Touchscreen */
|
|
{
|
|
I2C_BOARD_INFO("st1232-ts", 0x55),
|
|
.irq = IRQ7,
|
|
},
|
|
};
|
|
|
|
#define IRQ21 evt2irq(0x32a0)
|
|
|
|
static struct i2c_board_info i2c1_devices[] = {
|
|
/* Accelerometer */
|
|
{
|
|
I2C_BOARD_INFO("adxl34x", 0x53),
|
|
.irq = IRQ21,
|
|
},
|
|
};
|
|
|
|
static struct map_desc mackerel_io_desc[] __initdata = {
|
|
/* create a 1:1 entity map for 0xe6xxxxxx
|
|
* used by CPGA, INTC and PFC.
|
|
*/
|
|
{
|
|
.virtual = 0xe6000000,
|
|
.pfn = __phys_to_pfn(0xe6000000),
|
|
.length = 256 << 20,
|
|
.type = MT_DEVICE_NONSHARED
|
|
},
|
|
};
|
|
|
|
static void __init mackerel_map_io(void)
|
|
{
|
|
iotable_init(mackerel_io_desc, ARRAY_SIZE(mackerel_io_desc));
|
|
/* DMA memory at 0xf6000000 - 0xffdfffff */
|
|
init_consistent_dma_size(158 << 20);
|
|
|
|
/* setup early devices and console here as well */
|
|
sh7372_add_early_devices();
|
|
shmobile_setup_console();
|
|
}
|
|
|
|
#define GPIO_PORT9CR 0xE6051009
|
|
#define GPIO_PORT10CR 0xE605100A
|
|
#define GPIO_PORT167CR 0xE60520A7
|
|
#define GPIO_PORT168CR 0xE60520A8
|
|
#define SRCR4 0xe61580bc
|
|
#define USCCR1 0xE6058144
|
|
static void __init mackerel_init(void)
|
|
{
|
|
u32 srcr4;
|
|
struct clk *clk;
|
|
int ret;
|
|
|
|
sh7372_pinmux_init();
|
|
|
|
/* enable SCIFA0 */
|
|
gpio_request(GPIO_FN_SCIFA0_TXD, NULL);
|
|
gpio_request(GPIO_FN_SCIFA0_RXD, NULL);
|
|
|
|
/* enable SMSC911X */
|
|
gpio_request(GPIO_FN_CS5A, NULL);
|
|
gpio_request(GPIO_FN_IRQ6_39, NULL);
|
|
|
|
/* LCDC */
|
|
gpio_request(GPIO_FN_LCDD23, NULL);
|
|
gpio_request(GPIO_FN_LCDD22, NULL);
|
|
gpio_request(GPIO_FN_LCDD21, NULL);
|
|
gpio_request(GPIO_FN_LCDD20, NULL);
|
|
gpio_request(GPIO_FN_LCDD19, NULL);
|
|
gpio_request(GPIO_FN_LCDD18, NULL);
|
|
gpio_request(GPIO_FN_LCDD17, NULL);
|
|
gpio_request(GPIO_FN_LCDD16, NULL);
|
|
gpio_request(GPIO_FN_LCDD15, NULL);
|
|
gpio_request(GPIO_FN_LCDD14, NULL);
|
|
gpio_request(GPIO_FN_LCDD13, NULL);
|
|
gpio_request(GPIO_FN_LCDD12, NULL);
|
|
gpio_request(GPIO_FN_LCDD11, NULL);
|
|
gpio_request(GPIO_FN_LCDD10, NULL);
|
|
gpio_request(GPIO_FN_LCDD9, NULL);
|
|
gpio_request(GPIO_FN_LCDD8, NULL);
|
|
gpio_request(GPIO_FN_LCDD7, NULL);
|
|
gpio_request(GPIO_FN_LCDD6, NULL);
|
|
gpio_request(GPIO_FN_LCDD5, NULL);
|
|
gpio_request(GPIO_FN_LCDD4, NULL);
|
|
gpio_request(GPIO_FN_LCDD3, NULL);
|
|
gpio_request(GPIO_FN_LCDD2, NULL);
|
|
gpio_request(GPIO_FN_LCDD1, NULL);
|
|
gpio_request(GPIO_FN_LCDD0, NULL);
|
|
gpio_request(GPIO_FN_LCDDISP, NULL);
|
|
gpio_request(GPIO_FN_LCDDCK, NULL);
|
|
|
|
gpio_request(GPIO_PORT31, NULL); /* backlight */
|
|
gpio_direction_output(GPIO_PORT31, 0); /* off by default */
|
|
|
|
gpio_request(GPIO_PORT151, NULL); /* LCDDON */
|
|
gpio_direction_output(GPIO_PORT151, 1);
|
|
|
|
/* USBHS0 */
|
|
gpio_request(GPIO_FN_VBUS0_0, NULL);
|
|
gpio_pull_down(GPIO_PORT168CR); /* VBUS0_0 pull down */
|
|
|
|
/* USBHS1 */
|
|
gpio_request(GPIO_FN_VBUS0_1, NULL);
|
|
gpio_pull_down(GPIO_PORT167CR); /* VBUS0_1 pull down */
|
|
gpio_request(GPIO_FN_IDIN_1_113, NULL);
|
|
|
|
/* USB phy tweak to make the r8a66597_hcd host driver work */
|
|
__raw_writew(0x8a0a, 0xe6058130); /* USBCR4 */
|
|
|
|
/* enable FSI2 port A (ak4643) */
|
|
gpio_request(GPIO_FN_FSIAIBT, NULL);
|
|
gpio_request(GPIO_FN_FSIAILR, NULL);
|
|
gpio_request(GPIO_FN_FSIAISLD, NULL);
|
|
gpio_request(GPIO_FN_FSIAOSLD, NULL);
|
|
gpio_request(GPIO_PORT161, NULL);
|
|
gpio_direction_output(GPIO_PORT161, 0); /* slave */
|
|
|
|
gpio_request(GPIO_PORT9, NULL);
|
|
gpio_request(GPIO_PORT10, NULL);
|
|
gpio_no_direction(GPIO_PORT9CR); /* FSIAOBT needs no direction */
|
|
gpio_no_direction(GPIO_PORT10CR); /* FSIAOLR needs no direction */
|
|
|
|
intc_set_priority(IRQ_FSI, 3); /* irq priority FSI(3) > SMSC911X(2) */
|
|
|
|
/* setup FSI2 port B (HDMI) */
|
|
gpio_request(GPIO_FN_FSIBCK, NULL);
|
|
__raw_writew(__raw_readw(USCCR1) & ~(1 << 6), USCCR1); /* use SPDIF */
|
|
|
|
/* set SPU2 clock to 119.6 MHz */
|
|
clk = clk_get(NULL, "spu_clk");
|
|
if (!IS_ERR(clk)) {
|
|
clk_set_rate(clk, clk_round_rate(clk, 119600000));
|
|
clk_put(clk);
|
|
}
|
|
|
|
/* enable Keypad */
|
|
gpio_request(GPIO_FN_IRQ9_42, NULL);
|
|
irq_set_irq_type(IRQ9, IRQ_TYPE_LEVEL_HIGH);
|
|
|
|
/* enable Touchscreen */
|
|
gpio_request(GPIO_FN_IRQ7_40, NULL);
|
|
irq_set_irq_type(IRQ7, IRQ_TYPE_LEVEL_LOW);
|
|
|
|
/* enable Accelerometer */
|
|
gpio_request(GPIO_FN_IRQ21, NULL);
|
|
irq_set_irq_type(IRQ21, IRQ_TYPE_LEVEL_HIGH);
|
|
|
|
/* enable SDHI0 */
|
|
gpio_request(GPIO_FN_SDHICD0, NULL);
|
|
gpio_request(GPIO_FN_SDHIWP0, NULL);
|
|
gpio_request(GPIO_FN_SDHICMD0, NULL);
|
|
gpio_request(GPIO_FN_SDHICLK0, NULL);
|
|
gpio_request(GPIO_FN_SDHID0_3, NULL);
|
|
gpio_request(GPIO_FN_SDHID0_2, NULL);
|
|
gpio_request(GPIO_FN_SDHID0_1, NULL);
|
|
gpio_request(GPIO_FN_SDHID0_0, NULL);
|
|
|
|
ret = request_irq(evt2irq(0x3340), mackerel_sdhi0_gpio_cd,
|
|
IRQF_TRIGGER_FALLING, "sdhi0 cd", &sdhi0_device.dev);
|
|
if (!ret)
|
|
sdhi0_info.tmio_flags |= TMIO_MMC_HAS_COLD_CD;
|
|
else
|
|
pr_err("Cannot get IRQ #%d: %d\n", evt2irq(0x3340), ret);
|
|
|
|
#if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE)
|
|
/* enable SDHI1 */
|
|
gpio_request(GPIO_FN_SDHICMD1, NULL);
|
|
gpio_request(GPIO_FN_SDHICLK1, NULL);
|
|
gpio_request(GPIO_FN_SDHID1_3, NULL);
|
|
gpio_request(GPIO_FN_SDHID1_2, NULL);
|
|
gpio_request(GPIO_FN_SDHID1_1, NULL);
|
|
gpio_request(GPIO_FN_SDHID1_0, NULL);
|
|
#endif
|
|
/* card detect pin for MMC slot (CN7) */
|
|
gpio_request(GPIO_PORT41, NULL);
|
|
gpio_direction_input(GPIO_PORT41);
|
|
|
|
/* enable SDHI2 */
|
|
gpio_request(GPIO_FN_SDHICMD2, NULL);
|
|
gpio_request(GPIO_FN_SDHICLK2, NULL);
|
|
gpio_request(GPIO_FN_SDHID2_3, NULL);
|
|
gpio_request(GPIO_FN_SDHID2_2, NULL);
|
|
gpio_request(GPIO_FN_SDHID2_1, NULL);
|
|
gpio_request(GPIO_FN_SDHID2_0, NULL);
|
|
|
|
/* card detect pin for microSD slot (CN23) */
|
|
gpio_request(GPIO_PORT162, NULL);
|
|
gpio_direction_input(GPIO_PORT162);
|
|
|
|
/* MMCIF */
|
|
gpio_request(GPIO_FN_MMCD0_0, NULL);
|
|
gpio_request(GPIO_FN_MMCD0_1, NULL);
|
|
gpio_request(GPIO_FN_MMCD0_2, NULL);
|
|
gpio_request(GPIO_FN_MMCD0_3, NULL);
|
|
gpio_request(GPIO_FN_MMCD0_4, NULL);
|
|
gpio_request(GPIO_FN_MMCD0_5, NULL);
|
|
gpio_request(GPIO_FN_MMCD0_6, NULL);
|
|
gpio_request(GPIO_FN_MMCD0_7, NULL);
|
|
gpio_request(GPIO_FN_MMCCMD0, NULL);
|
|
gpio_request(GPIO_FN_MMCCLK0, NULL);
|
|
|
|
/* enable GPS module (GT-720F) */
|
|
gpio_request(GPIO_FN_SCIFA2_TXD1, NULL);
|
|
gpio_request(GPIO_FN_SCIFA2_RXD1, NULL);
|
|
|
|
/* CEU */
|
|
gpio_request(GPIO_FN_VIO_CLK, NULL);
|
|
gpio_request(GPIO_FN_VIO_VD, NULL);
|
|
gpio_request(GPIO_FN_VIO_HD, NULL);
|
|
gpio_request(GPIO_FN_VIO_FIELD, NULL);
|
|
gpio_request(GPIO_FN_VIO_CKO, NULL);
|
|
gpio_request(GPIO_FN_VIO_D7, NULL);
|
|
gpio_request(GPIO_FN_VIO_D6, NULL);
|
|
gpio_request(GPIO_FN_VIO_D5, NULL);
|
|
gpio_request(GPIO_FN_VIO_D4, NULL);
|
|
gpio_request(GPIO_FN_VIO_D3, NULL);
|
|
gpio_request(GPIO_FN_VIO_D2, NULL);
|
|
gpio_request(GPIO_FN_VIO_D1, NULL);
|
|
gpio_request(GPIO_FN_VIO_D0, NULL);
|
|
|
|
/* HDMI */
|
|
gpio_request(GPIO_FN_HDMI_HPD, NULL);
|
|
gpio_request(GPIO_FN_HDMI_CEC, NULL);
|
|
|
|
/* Reset HDMI, must be held at least one EXTALR (32768Hz) period */
|
|
srcr4 = __raw_readl(SRCR4);
|
|
__raw_writel(srcr4 | (1 << 13), SRCR4);
|
|
udelay(50);
|
|
__raw_writel(srcr4 & ~(1 << 13), SRCR4);
|
|
|
|
i2c_register_board_info(0, i2c0_devices,
|
|
ARRAY_SIZE(i2c0_devices));
|
|
i2c_register_board_info(1, i2c1_devices,
|
|
ARRAY_SIZE(i2c1_devices));
|
|
|
|
sh7372_add_standard_devices();
|
|
|
|
platform_add_devices(mackerel_devices, ARRAY_SIZE(mackerel_devices));
|
|
|
|
sh7372_add_device_to_domain(&sh7372_a4lc, &lcdc_device);
|
|
sh7372_add_device_to_domain(&sh7372_a4lc, &hdmi_lcdc_device);
|
|
sh7372_add_device_to_domain(&sh7372_a4lc, &meram_device);
|
|
sh7372_add_device_to_domain(&sh7372_a4mp, &fsi_device);
|
|
sh7372_add_device_to_domain(&sh7372_a3sp, &usbhs0_device);
|
|
sh7372_add_device_to_domain(&sh7372_a3sp, &usbhs1_device);
|
|
sh7372_add_device_to_domain(&sh7372_a3sp, &sh_mmcif_device);
|
|
sh7372_add_device_to_domain(&sh7372_a3sp, &sdhi0_device);
|
|
#if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE)
|
|
sh7372_add_device_to_domain(&sh7372_a3sp, &sdhi1_device);
|
|
#endif
|
|
sh7372_add_device_to_domain(&sh7372_a3sp, &sdhi2_device);
|
|
sh7372_add_device_to_domain(&sh7372_a4r, &ceu_device);
|
|
|
|
hdmi_init_pm_clock();
|
|
sh7372_pm_init();
|
|
pm_clk_add(&fsi_device.dev, "spu2");
|
|
pm_clk_add(&hdmi_lcdc_device.dev, "hdmi");
|
|
}
|
|
|
|
static void __init mackerel_timer_init(void)
|
|
{
|
|
sh7372_clock_init();
|
|
shmobile_timer.init();
|
|
|
|
/* External clock source */
|
|
clk_set_rate(&sh7372_dv_clki_clk, 27000000);
|
|
}
|
|
|
|
static struct sys_timer mackerel_timer = {
|
|
.init = mackerel_timer_init,
|
|
};
|
|
|
|
MACHINE_START(MACKEREL, "mackerel")
|
|
.map_io = mackerel_map_io,
|
|
.init_irq = sh7372_init_irq,
|
|
.handle_irq = shmobile_handle_irq_intc,
|
|
.init_machine = mackerel_init,
|
|
.timer = &mackerel_timer,
|
|
MACHINE_END
|