2188 lines
56 KiB
C
2188 lines
56 KiB
C
/*
|
|
* ATAPI CD-ROM driver.
|
|
*
|
|
* Copyright (C) 1994-1996 Scott Snyder <snyder@fnald0.fnal.gov>
|
|
* Copyright (C) 1996-1998 Erik Andersen <andersee@debian.org>
|
|
* Copyright (C) 1998-2000 Jens Axboe <axboe@suse.de>
|
|
* Copyright (C) 2005, 2007 Bartlomiej Zolnierkiewicz
|
|
*
|
|
* May be copied or modified under the terms of the GNU General Public
|
|
* License. See linux/COPYING for more information.
|
|
*
|
|
* See Documentation/cdrom/ide-cd for usage information.
|
|
*
|
|
* Suggestions are welcome. Patches that work are more welcome though. ;-)
|
|
* For those wishing to work on this driver, please be sure you download
|
|
* and comply with the latest Mt. Fuji (SFF8090 version 4) and ATAPI
|
|
* (SFF-8020i rev 2.6) standards. These documents can be obtained by
|
|
* anonymous ftp from:
|
|
* ftp://fission.dt.wdc.com/pub/standards/SFF_atapi/spec/SFF8020-r2.6/PS/8020r26.ps
|
|
* ftp://ftp.avc-pioneer.com/Mtfuji4/Spec/Fuji4r10.pdf
|
|
*
|
|
* For historical changelog please see:
|
|
* Documentation/ide/ChangeLog.ide-cd.1994-2004
|
|
*/
|
|
|
|
#define IDECD_VERSION "5.00"
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/types.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/timer.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/cdrom.h>
|
|
#include <linux/ide.h>
|
|
#include <linux/completion.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/bcd.h>
|
|
|
|
/* For SCSI -> ATAPI command conversion */
|
|
#include <scsi/scsi.h>
|
|
|
|
#include <linux/irq.h>
|
|
#include <linux/io.h>
|
|
#include <asm/byteorder.h>
|
|
#include <linux/uaccess.h>
|
|
#include <asm/unaligned.h>
|
|
|
|
#include "ide-cd.h"
|
|
|
|
static DEFINE_MUTEX(idecd_ref_mutex);
|
|
|
|
#define to_ide_cd(obj) container_of(obj, struct cdrom_info, kref)
|
|
|
|
#define ide_cd_g(disk) \
|
|
container_of((disk)->private_data, struct cdrom_info, driver)
|
|
|
|
static void ide_cd_release(struct kref *);
|
|
|
|
static struct cdrom_info *ide_cd_get(struct gendisk *disk)
|
|
{
|
|
struct cdrom_info *cd = NULL;
|
|
|
|
mutex_lock(&idecd_ref_mutex);
|
|
cd = ide_cd_g(disk);
|
|
if (cd) {
|
|
if (ide_device_get(cd->drive))
|
|
cd = NULL;
|
|
else
|
|
kref_get(&cd->kref);
|
|
|
|
}
|
|
mutex_unlock(&idecd_ref_mutex);
|
|
return cd;
|
|
}
|
|
|
|
static void ide_cd_put(struct cdrom_info *cd)
|
|
{
|
|
ide_drive_t *drive = cd->drive;
|
|
|
|
mutex_lock(&idecd_ref_mutex);
|
|
kref_put(&cd->kref, ide_cd_release);
|
|
ide_device_put(drive);
|
|
mutex_unlock(&idecd_ref_mutex);
|
|
}
|
|
|
|
/*
|
|
* Generic packet command support and error handling routines.
|
|
*/
|
|
|
|
/* Mark that we've seen a media change and invalidate our internal buffers. */
|
|
static void cdrom_saw_media_change(ide_drive_t *drive)
|
|
{
|
|
drive->atapi_flags |= IDE_AFLAG_MEDIA_CHANGED;
|
|
drive->atapi_flags &= ~IDE_AFLAG_TOC_VALID;
|
|
}
|
|
|
|
static int cdrom_log_sense(ide_drive_t *drive, struct request *rq,
|
|
struct request_sense *sense)
|
|
{
|
|
int log = 0;
|
|
|
|
if (!sense || !rq || (rq->cmd_flags & REQ_QUIET))
|
|
return 0;
|
|
|
|
switch (sense->sense_key) {
|
|
case NO_SENSE:
|
|
case RECOVERED_ERROR:
|
|
break;
|
|
case NOT_READY:
|
|
/*
|
|
* don't care about tray state messages for e.g. capacity
|
|
* commands or in-progress or becoming ready
|
|
*/
|
|
if (sense->asc == 0x3a || sense->asc == 0x04)
|
|
break;
|
|
log = 1;
|
|
break;
|
|
case ILLEGAL_REQUEST:
|
|
/*
|
|
* don't log START_STOP unit with LoEj set, since we cannot
|
|
* reliably check if drive can auto-close
|
|
*/
|
|
if (rq->cmd[0] == GPCMD_START_STOP_UNIT && sense->asc == 0x24)
|
|
break;
|
|
log = 1;
|
|
break;
|
|
case UNIT_ATTENTION:
|
|
/*
|
|
* Make good and sure we've seen this potential media change.
|
|
* Some drives (i.e. Creative) fail to present the correct sense
|
|
* key in the error register.
|
|
*/
|
|
cdrom_saw_media_change(drive);
|
|
break;
|
|
default:
|
|
log = 1;
|
|
break;
|
|
}
|
|
return log;
|
|
}
|
|
|
|
static void cdrom_analyze_sense_data(ide_drive_t *drive,
|
|
struct request *failed_command,
|
|
struct request_sense *sense)
|
|
{
|
|
unsigned long sector;
|
|
unsigned long bio_sectors;
|
|
struct cdrom_info *info = drive->driver_data;
|
|
|
|
if (!cdrom_log_sense(drive, failed_command, sense))
|
|
return;
|
|
|
|
/*
|
|
* If a read toc is executed for a CD-R or CD-RW medium where the first
|
|
* toc has not been recorded yet, it will fail with 05/24/00 (which is a
|
|
* confusing error)
|
|
*/
|
|
if (failed_command && failed_command->cmd[0] == GPCMD_READ_TOC_PMA_ATIP)
|
|
if (sense->sense_key == 0x05 && sense->asc == 0x24)
|
|
return;
|
|
|
|
/* current error */
|
|
if (sense->error_code == 0x70) {
|
|
switch (sense->sense_key) {
|
|
case MEDIUM_ERROR:
|
|
case VOLUME_OVERFLOW:
|
|
case ILLEGAL_REQUEST:
|
|
if (!sense->valid)
|
|
break;
|
|
if (failed_command == NULL ||
|
|
!blk_fs_request(failed_command))
|
|
break;
|
|
sector = (sense->information[0] << 24) |
|
|
(sense->information[1] << 16) |
|
|
(sense->information[2] << 8) |
|
|
(sense->information[3]);
|
|
|
|
if (drive->queue->hardsect_size == 2048)
|
|
/* device sector size is 2K */
|
|
sector <<= 2;
|
|
|
|
bio_sectors = max(bio_sectors(failed_command->bio), 4U);
|
|
sector &= ~(bio_sectors - 1);
|
|
|
|
if (sector < get_capacity(info->disk) &&
|
|
drive->probed_capacity - sector < 4 * 75)
|
|
set_capacity(info->disk, sector);
|
|
}
|
|
}
|
|
|
|
ide_cd_log_error(drive->name, failed_command, sense);
|
|
}
|
|
|
|
static void cdrom_queue_request_sense(ide_drive_t *drive, void *sense,
|
|
struct request *failed_command)
|
|
{
|
|
struct cdrom_info *info = drive->driver_data;
|
|
struct request *rq = &info->request_sense_request;
|
|
|
|
if (sense == NULL)
|
|
sense = &info->sense_data;
|
|
|
|
/* stuff the sense request in front of our current request */
|
|
blk_rq_init(NULL, rq);
|
|
rq->cmd_type = REQ_TYPE_ATA_PC;
|
|
rq->rq_disk = info->disk;
|
|
|
|
rq->data = sense;
|
|
rq->cmd[0] = GPCMD_REQUEST_SENSE;
|
|
rq->cmd[4] = 18;
|
|
rq->data_len = 18;
|
|
|
|
rq->cmd_type = REQ_TYPE_SENSE;
|
|
rq->cmd_flags |= REQ_PREEMPT;
|
|
|
|
/* NOTE! Save the failed command in "rq->buffer" */
|
|
rq->buffer = (void *) failed_command;
|
|
|
|
ide_do_drive_cmd(drive, rq);
|
|
}
|
|
|
|
static void cdrom_end_request(ide_drive_t *drive, int uptodate)
|
|
{
|
|
struct request *rq = HWGROUP(drive)->rq;
|
|
int nsectors = rq->hard_cur_sectors;
|
|
|
|
if (blk_sense_request(rq) && uptodate) {
|
|
/*
|
|
* For REQ_TYPE_SENSE, "rq->buffer" points to the original
|
|
* failed request
|
|
*/
|
|
struct request *failed = (struct request *) rq->buffer;
|
|
struct cdrom_info *info = drive->driver_data;
|
|
void *sense = &info->sense_data;
|
|
unsigned long flags;
|
|
|
|
if (failed) {
|
|
if (failed->sense) {
|
|
sense = failed->sense;
|
|
failed->sense_len = rq->sense_len;
|
|
}
|
|
cdrom_analyze_sense_data(drive, failed, sense);
|
|
/*
|
|
* now end the failed request
|
|
*/
|
|
if (blk_fs_request(failed)) {
|
|
if (ide_end_dequeued_request(drive, failed, 0,
|
|
failed->hard_nr_sectors))
|
|
BUG();
|
|
} else {
|
|
spin_lock_irqsave(&ide_lock, flags);
|
|
if (__blk_end_request(failed, -EIO,
|
|
failed->data_len))
|
|
BUG();
|
|
spin_unlock_irqrestore(&ide_lock, flags);
|
|
}
|
|
} else
|
|
cdrom_analyze_sense_data(drive, NULL, sense);
|
|
}
|
|
|
|
if (!rq->current_nr_sectors && blk_fs_request(rq))
|
|
uptodate = 1;
|
|
/* make sure it's fully ended */
|
|
if (blk_pc_request(rq))
|
|
nsectors = (rq->data_len + 511) >> 9;
|
|
if (!nsectors)
|
|
nsectors = 1;
|
|
|
|
ide_end_request(drive, uptodate, nsectors);
|
|
}
|
|
|
|
static void ide_dump_status_no_sense(ide_drive_t *drive, const char *msg, u8 st)
|
|
{
|
|
if (st & 0x80)
|
|
return;
|
|
ide_dump_status(drive, msg, st);
|
|
}
|
|
|
|
/*
|
|
* Returns:
|
|
* 0: if the request should be continued.
|
|
* 1: if the request was ended.
|
|
*/
|
|
static int cdrom_decode_status(ide_drive_t *drive, int good_stat, int *stat_ret)
|
|
{
|
|
ide_hwif_t *hwif = drive->hwif;
|
|
struct request *rq = hwif->hwgroup->rq;
|
|
int stat, err, sense_key;
|
|
|
|
/* check for errors */
|
|
stat = hwif->tp_ops->read_status(hwif);
|
|
|
|
if (stat_ret)
|
|
*stat_ret = stat;
|
|
|
|
if (OK_STAT(stat, good_stat, BAD_R_STAT))
|
|
return 0;
|
|
|
|
/* get the IDE error register */
|
|
err = ide_read_error(drive);
|
|
sense_key = err >> 4;
|
|
|
|
if (rq == NULL) {
|
|
printk(KERN_ERR "%s: missing rq in %s\n",
|
|
drive->name, __func__);
|
|
return 1;
|
|
}
|
|
|
|
if (blk_sense_request(rq)) {
|
|
/*
|
|
* We got an error trying to get sense info from the drive
|
|
* (probably while trying to recover from a former error).
|
|
* Just give up.
|
|
*/
|
|
rq->cmd_flags |= REQ_FAILED;
|
|
cdrom_end_request(drive, 0);
|
|
ide_error(drive, "request sense failure", stat);
|
|
return 1;
|
|
|
|
} else if (blk_pc_request(rq) || rq->cmd_type == REQ_TYPE_ATA_PC) {
|
|
/* All other functions, except for READ. */
|
|
|
|
/*
|
|
* if we have an error, pass back CHECK_CONDITION as the
|
|
* scsi status byte
|
|
*/
|
|
if (blk_pc_request(rq) && !rq->errors)
|
|
rq->errors = SAM_STAT_CHECK_CONDITION;
|
|
|
|
/* check for tray open */
|
|
if (sense_key == NOT_READY) {
|
|
cdrom_saw_media_change(drive);
|
|
} else if (sense_key == UNIT_ATTENTION) {
|
|
/* check for media change */
|
|
cdrom_saw_media_change(drive);
|
|
return 0;
|
|
} else if (sense_key == ILLEGAL_REQUEST &&
|
|
rq->cmd[0] == GPCMD_START_STOP_UNIT) {
|
|
/*
|
|
* Don't print error message for this condition--
|
|
* SFF8090i indicates that 5/24/00 is the correct
|
|
* response to a request to close the tray if the
|
|
* drive doesn't have that capability.
|
|
* cdrom_log_sense() knows this!
|
|
*/
|
|
} else if (!(rq->cmd_flags & REQ_QUIET)) {
|
|
/* otherwise, print an error */
|
|
ide_dump_status(drive, "packet command error", stat);
|
|
}
|
|
|
|
rq->cmd_flags |= REQ_FAILED;
|
|
|
|
/*
|
|
* instead of playing games with moving completions around,
|
|
* remove failed request completely and end it when the
|
|
* request sense has completed
|
|
*/
|
|
goto end_request;
|
|
|
|
} else if (blk_fs_request(rq)) {
|
|
int do_end_request = 0;
|
|
|
|
/* handle errors from READ and WRITE requests */
|
|
|
|
if (blk_noretry_request(rq))
|
|
do_end_request = 1;
|
|
|
|
if (sense_key == NOT_READY) {
|
|
/* tray open */
|
|
if (rq_data_dir(rq) == READ) {
|
|
cdrom_saw_media_change(drive);
|
|
|
|
/* fail the request */
|
|
printk(KERN_ERR "%s: tray open\n", drive->name);
|
|
do_end_request = 1;
|
|
} else {
|
|
struct cdrom_info *info = drive->driver_data;
|
|
|
|
/*
|
|
* Allow the drive 5 seconds to recover, some
|
|
* devices will return this error while flushing
|
|
* data from cache.
|
|
*/
|
|
if (!rq->errors)
|
|
info->write_timeout = jiffies +
|
|
ATAPI_WAIT_WRITE_BUSY;
|
|
rq->errors = 1;
|
|
if (time_after(jiffies, info->write_timeout))
|
|
do_end_request = 1;
|
|
else {
|
|
unsigned long flags;
|
|
|
|
/*
|
|
* take a breather relying on the unplug
|
|
* timer to kick us again
|
|
*/
|
|
spin_lock_irqsave(&ide_lock, flags);
|
|
blk_plug_device(drive->queue);
|
|
spin_unlock_irqrestore(&ide_lock,
|
|
flags);
|
|
return 1;
|
|
}
|
|
}
|
|
} else if (sense_key == UNIT_ATTENTION) {
|
|
/* media change */
|
|
cdrom_saw_media_change(drive);
|
|
|
|
/*
|
|
* Arrange to retry the request but be sure to give up
|
|
* if we've retried too many times.
|
|
*/
|
|
if (++rq->errors > ERROR_MAX)
|
|
do_end_request = 1;
|
|
} else if (sense_key == ILLEGAL_REQUEST ||
|
|
sense_key == DATA_PROTECT) {
|
|
/*
|
|
* No point in retrying after an illegal request or data
|
|
* protect error.
|
|
*/
|
|
ide_dump_status_no_sense(drive, "command error", stat);
|
|
do_end_request = 1;
|
|
} else if (sense_key == MEDIUM_ERROR) {
|
|
/*
|
|
* No point in re-trying a zillion times on a bad
|
|
* sector. If we got here the error is not correctable.
|
|
*/
|
|
ide_dump_status_no_sense(drive,
|
|
"media error (bad sector)",
|
|
stat);
|
|
do_end_request = 1;
|
|
} else if (sense_key == BLANK_CHECK) {
|
|
/* disk appears blank ?? */
|
|
ide_dump_status_no_sense(drive, "media error (blank)",
|
|
stat);
|
|
do_end_request = 1;
|
|
} else if ((err & ~ABRT_ERR) != 0) {
|
|
/* go to the default handler for other errors */
|
|
ide_error(drive, "cdrom_decode_status", stat);
|
|
return 1;
|
|
} else if ((++rq->errors > ERROR_MAX)) {
|
|
/* we've racked up too many retries, abort */
|
|
do_end_request = 1;
|
|
}
|
|
|
|
/*
|
|
* End a request through request sense analysis when we have
|
|
* sense data. We need this in order to perform end of media
|
|
* processing.
|
|
*/
|
|
if (do_end_request)
|
|
goto end_request;
|
|
|
|
/*
|
|
* If we got a CHECK_CONDITION status, queue
|
|
* a request sense command.
|
|
*/
|
|
if (stat & ERR_STAT)
|
|
cdrom_queue_request_sense(drive, NULL, NULL);
|
|
} else {
|
|
blk_dump_rq_flags(rq, "ide-cd: bad rq");
|
|
cdrom_end_request(drive, 0);
|
|
}
|
|
|
|
/* retry, or handle the next request */
|
|
return 1;
|
|
|
|
end_request:
|
|
if (stat & ERR_STAT) {
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&ide_lock, flags);
|
|
blkdev_dequeue_request(rq);
|
|
HWGROUP(drive)->rq = NULL;
|
|
spin_unlock_irqrestore(&ide_lock, flags);
|
|
|
|
cdrom_queue_request_sense(drive, rq->sense, rq);
|
|
} else
|
|
cdrom_end_request(drive, 0);
|
|
|
|
return 1;
|
|
}
|
|
|
|
static int cdrom_timer_expiry(ide_drive_t *drive)
|
|
{
|
|
struct request *rq = HWGROUP(drive)->rq;
|
|
unsigned long wait = 0;
|
|
|
|
/*
|
|
* Some commands are *slow* and normally take a long time to complete.
|
|
* Usually we can use the ATAPI "disconnect" to bypass this, but not all
|
|
* commands/drives support that. Let ide_timer_expiry keep polling us
|
|
* for these.
|
|
*/
|
|
switch (rq->cmd[0]) {
|
|
case GPCMD_BLANK:
|
|
case GPCMD_FORMAT_UNIT:
|
|
case GPCMD_RESERVE_RZONE_TRACK:
|
|
case GPCMD_CLOSE_TRACK:
|
|
case GPCMD_FLUSH_CACHE:
|
|
wait = ATAPI_WAIT_PC;
|
|
break;
|
|
default:
|
|
if (!(rq->cmd_flags & REQ_QUIET))
|
|
printk(KERN_INFO "ide-cd: cmd 0x%x timed out\n",
|
|
rq->cmd[0]);
|
|
wait = 0;
|
|
break;
|
|
}
|
|
return wait;
|
|
}
|
|
|
|
/*
|
|
* Set up the device registers for transferring a packet command on DEV,
|
|
* expecting to later transfer XFERLEN bytes. HANDLER is the routine
|
|
* which actually transfers the command to the drive. If this is a
|
|
* drq_interrupt device, this routine will arrange for HANDLER to be
|
|
* called when the interrupt from the drive arrives. Otherwise, HANDLER
|
|
* will be called immediately after the drive is prepared for the transfer.
|
|
*/
|
|
static ide_startstop_t cdrom_start_packet_command(ide_drive_t *drive,
|
|
int xferlen,
|
|
ide_handler_t *handler)
|
|
{
|
|
struct cdrom_info *info = drive->driver_data;
|
|
ide_hwif_t *hwif = drive->hwif;
|
|
|
|
/* FIXME: for Virtual DMA we must check harder */
|
|
if (info->dma)
|
|
info->dma = !hwif->dma_ops->dma_setup(drive);
|
|
|
|
/* set up the controller registers */
|
|
ide_pktcmd_tf_load(drive, IDE_TFLAG_OUT_NSECT | IDE_TFLAG_OUT_LBAL,
|
|
xferlen, info->dma);
|
|
|
|
if (drive->atapi_flags & IDE_AFLAG_DRQ_INTERRUPT) {
|
|
/* waiting for CDB interrupt, not DMA yet. */
|
|
if (info->dma)
|
|
drive->waiting_for_dma = 0;
|
|
|
|
/* packet command */
|
|
ide_execute_command(drive, WIN_PACKETCMD, handler,
|
|
ATAPI_WAIT_PC, cdrom_timer_expiry);
|
|
return ide_started;
|
|
} else {
|
|
ide_execute_pkt_cmd(drive);
|
|
|
|
return (*handler) (drive);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Send a packet command to DRIVE described by CMD_BUF and CMD_LEN. The device
|
|
* registers must have already been prepared by cdrom_start_packet_command.
|
|
* HANDLER is the interrupt handler to call when the command completes or
|
|
* there's data ready.
|
|
*/
|
|
#define ATAPI_MIN_CDB_BYTES 12
|
|
static ide_startstop_t cdrom_transfer_packet_command(ide_drive_t *drive,
|
|
struct request *rq,
|
|
ide_handler_t *handler)
|
|
{
|
|
ide_hwif_t *hwif = drive->hwif;
|
|
int cmd_len;
|
|
struct cdrom_info *info = drive->driver_data;
|
|
ide_startstop_t startstop;
|
|
|
|
if (drive->atapi_flags & IDE_AFLAG_DRQ_INTERRUPT) {
|
|
/*
|
|
* Here we should have been called after receiving an interrupt
|
|
* from the device. DRQ should how be set.
|
|
*/
|
|
|
|
/* check for errors */
|
|
if (cdrom_decode_status(drive, DRQ_STAT, NULL))
|
|
return ide_stopped;
|
|
|
|
/* ok, next interrupt will be DMA interrupt */
|
|
if (info->dma)
|
|
drive->waiting_for_dma = 1;
|
|
} else {
|
|
/* otherwise, we must wait for DRQ to get set */
|
|
if (ide_wait_stat(&startstop, drive, DRQ_STAT,
|
|
BUSY_STAT, WAIT_READY))
|
|
return startstop;
|
|
}
|
|
|
|
/* arm the interrupt handler */
|
|
ide_set_handler(drive, handler, rq->timeout, cdrom_timer_expiry);
|
|
|
|
/* ATAPI commands get padded out to 12 bytes minimum */
|
|
cmd_len = COMMAND_SIZE(rq->cmd[0]);
|
|
if (cmd_len < ATAPI_MIN_CDB_BYTES)
|
|
cmd_len = ATAPI_MIN_CDB_BYTES;
|
|
|
|
/* send the command to the device */
|
|
hwif->tp_ops->output_data(drive, NULL, rq->cmd, cmd_len);
|
|
|
|
/* start the DMA if need be */
|
|
if (info->dma)
|
|
hwif->dma_ops->dma_start(drive);
|
|
|
|
return ide_started;
|
|
}
|
|
|
|
/*
|
|
* Check the contents of the interrupt reason register from the cdrom
|
|
* and attempt to recover if there are problems. Returns 0 if everything's
|
|
* ok; nonzero if the request has been terminated.
|
|
*/
|
|
static int ide_cd_check_ireason(ide_drive_t *drive, struct request *rq,
|
|
int len, int ireason, int rw)
|
|
{
|
|
ide_hwif_t *hwif = drive->hwif;
|
|
|
|
/*
|
|
* ireason == 0: the drive wants to receive data from us
|
|
* ireason == 2: the drive is expecting to transfer data to us
|
|
*/
|
|
if (ireason == (!rw << 1))
|
|
return 0;
|
|
else if (ireason == (rw << 1)) {
|
|
|
|
/* whoops... */
|
|
printk(KERN_ERR "%s: %s: wrong transfer direction!\n",
|
|
drive->name, __func__);
|
|
|
|
ide_pad_transfer(drive, rw, len);
|
|
} else if (rw == 0 && ireason == 1) {
|
|
/*
|
|
* Some drives (ASUS) seem to tell us that status info is
|
|
* available. Just get it and ignore.
|
|
*/
|
|
(void)hwif->tp_ops->read_status(hwif);
|
|
return 0;
|
|
} else {
|
|
/* drive wants a command packet, or invalid ireason... */
|
|
printk(KERN_ERR "%s: %s: bad interrupt reason 0x%02x\n",
|
|
drive->name, __func__, ireason);
|
|
}
|
|
|
|
if (rq->cmd_type == REQ_TYPE_ATA_PC)
|
|
rq->cmd_flags |= REQ_FAILED;
|
|
|
|
cdrom_end_request(drive, 0);
|
|
return -1;
|
|
}
|
|
|
|
/*
|
|
* Assume that the drive will always provide data in multiples of at least
|
|
* SECTOR_SIZE, as it gets hairy to keep track of the transfers otherwise.
|
|
*/
|
|
static int ide_cd_check_transfer_size(ide_drive_t *drive, int len)
|
|
{
|
|
if ((len % SECTOR_SIZE) == 0)
|
|
return 0;
|
|
|
|
printk(KERN_ERR "%s: %s: Bad transfer size %d\n",
|
|
drive->name, __func__, len);
|
|
|
|
if (drive->atapi_flags & IDE_AFLAG_LIMIT_NFRAMES)
|
|
printk(KERN_ERR " This drive is not supported by "
|
|
"this version of the driver\n");
|
|
else {
|
|
printk(KERN_ERR " Trying to limit transfer sizes\n");
|
|
drive->atapi_flags |= IDE_AFLAG_LIMIT_NFRAMES;
|
|
}
|
|
|
|
return 1;
|
|
}
|
|
|
|
static ide_startstop_t cdrom_newpc_intr(ide_drive_t *);
|
|
|
|
static ide_startstop_t ide_cd_prepare_rw_request(ide_drive_t *drive,
|
|
struct request *rq)
|
|
{
|
|
if (rq_data_dir(rq) == READ) {
|
|
unsigned short sectors_per_frame =
|
|
queue_hardsect_size(drive->queue) >> SECTOR_BITS;
|
|
int nskip = rq->sector & (sectors_per_frame - 1);
|
|
|
|
/*
|
|
* If the requested sector doesn't start on a frame boundary,
|
|
* we must adjust the start of the transfer so that it does,
|
|
* and remember to skip the first few sectors.
|
|
*
|
|
* If the rq->current_nr_sectors field is larger than the size
|
|
* of the buffer, it will mean that we're to skip a number of
|
|
* sectors equal to the amount by which rq->current_nr_sectors
|
|
* is larger than the buffer size.
|
|
*/
|
|
if (nskip > 0) {
|
|
/* sanity check... */
|
|
if (rq->current_nr_sectors !=
|
|
bio_cur_sectors(rq->bio)) {
|
|
printk(KERN_ERR "%s: %s: buffer botch (%u)\n",
|
|
drive->name, __func__,
|
|
rq->current_nr_sectors);
|
|
cdrom_end_request(drive, 0);
|
|
return ide_stopped;
|
|
}
|
|
rq->current_nr_sectors += nskip;
|
|
}
|
|
}
|
|
#if 0
|
|
else
|
|
/* the immediate bit */
|
|
rq->cmd[1] = 1 << 3;
|
|
#endif
|
|
/* set up the command */
|
|
rq->timeout = ATAPI_WAIT_PC;
|
|
|
|
return ide_started;
|
|
}
|
|
|
|
/*
|
|
* Routine to send a read/write packet command to the drive. This is usually
|
|
* called directly from cdrom_start_{read,write}(). However, for drq_interrupt
|
|
* devices, it is called from an interrupt when the drive is ready to accept
|
|
* the command.
|
|
*/
|
|
static ide_startstop_t cdrom_start_rw_cont(ide_drive_t *drive)
|
|
{
|
|
struct request *rq = drive->hwif->hwgroup->rq;
|
|
|
|
/* send the command to the drive and return */
|
|
return cdrom_transfer_packet_command(drive, rq, cdrom_newpc_intr);
|
|
}
|
|
|
|
#define IDECD_SEEK_THRESHOLD (1000) /* 1000 blocks */
|
|
#define IDECD_SEEK_TIMER (5 * WAIT_MIN_SLEEP) /* 100 ms */
|
|
#define IDECD_SEEK_TIMEOUT (2 * WAIT_CMD) /* 20 sec */
|
|
|
|
static ide_startstop_t cdrom_seek_intr(ide_drive_t *drive)
|
|
{
|
|
struct cdrom_info *info = drive->driver_data;
|
|
int stat;
|
|
static int retry = 10;
|
|
|
|
if (cdrom_decode_status(drive, 0, &stat))
|
|
return ide_stopped;
|
|
|
|
drive->atapi_flags |= IDE_AFLAG_SEEKING;
|
|
|
|
if (retry && time_after(jiffies, info->start_seek + IDECD_SEEK_TIMER)) {
|
|
if (--retry == 0)
|
|
drive->dsc_overlap = 0;
|
|
}
|
|
return ide_stopped;
|
|
}
|
|
|
|
static void ide_cd_prepare_seek_request(ide_drive_t *drive, struct request *rq)
|
|
{
|
|
sector_t frame = rq->sector;
|
|
|
|
sector_div(frame, queue_hardsect_size(drive->queue) >> SECTOR_BITS);
|
|
|
|
memset(rq->cmd, 0, BLK_MAX_CDB);
|
|
rq->cmd[0] = GPCMD_SEEK;
|
|
put_unaligned(cpu_to_be32(frame), (unsigned int *) &rq->cmd[2]);
|
|
|
|
rq->timeout = ATAPI_WAIT_PC;
|
|
}
|
|
|
|
static ide_startstop_t cdrom_start_seek_continuation(ide_drive_t *drive)
|
|
{
|
|
struct request *rq = drive->hwif->hwgroup->rq;
|
|
|
|
return cdrom_transfer_packet_command(drive, rq, &cdrom_seek_intr);
|
|
}
|
|
|
|
/*
|
|
* Fix up a possibly partially-processed request so that we can start it over
|
|
* entirely, or even put it back on the request queue.
|
|
*/
|
|
static void restore_request(struct request *rq)
|
|
{
|
|
if (rq->buffer != bio_data(rq->bio)) {
|
|
sector_t n =
|
|
(rq->buffer - (char *)bio_data(rq->bio)) / SECTOR_SIZE;
|
|
|
|
rq->buffer = bio_data(rq->bio);
|
|
rq->nr_sectors += n;
|
|
rq->sector -= n;
|
|
}
|
|
rq->current_nr_sectors = bio_cur_sectors(rq->bio);
|
|
rq->hard_cur_sectors = rq->current_nr_sectors;
|
|
rq->hard_nr_sectors = rq->nr_sectors;
|
|
rq->hard_sector = rq->sector;
|
|
rq->q->prep_rq_fn(rq->q, rq);
|
|
}
|
|
|
|
/*
|
|
* All other packet commands.
|
|
*/
|
|
static void ide_cd_request_sense_fixup(struct request *rq)
|
|
{
|
|
/*
|
|
* Some of the trailing request sense fields are optional,
|
|
* and some drives don't send them. Sigh.
|
|
*/
|
|
if (rq->cmd[0] == GPCMD_REQUEST_SENSE &&
|
|
rq->data_len > 0 && rq->data_len <= 5)
|
|
while (rq->data_len > 0) {
|
|
*(u8 *)rq->data++ = 0;
|
|
--rq->data_len;
|
|
}
|
|
}
|
|
|
|
int ide_cd_queue_pc(ide_drive_t *drive, const unsigned char *cmd,
|
|
int write, void *buffer, unsigned *bufflen,
|
|
struct request_sense *sense, int timeout,
|
|
unsigned int cmd_flags)
|
|
{
|
|
struct cdrom_info *info = drive->driver_data;
|
|
struct request_sense local_sense;
|
|
int retries = 10;
|
|
unsigned int flags = 0;
|
|
|
|
if (!sense)
|
|
sense = &local_sense;
|
|
|
|
/* start of retry loop */
|
|
do {
|
|
struct request *rq;
|
|
int error;
|
|
|
|
rq = blk_get_request(drive->queue, write, __GFP_WAIT);
|
|
|
|
memcpy(rq->cmd, cmd, BLK_MAX_CDB);
|
|
rq->cmd_type = REQ_TYPE_ATA_PC;
|
|
rq->sense = sense;
|
|
rq->cmd_flags |= cmd_flags;
|
|
rq->timeout = timeout;
|
|
if (buffer) {
|
|
rq->data = buffer;
|
|
rq->data_len = *bufflen;
|
|
}
|
|
|
|
error = blk_execute_rq(drive->queue, info->disk, rq, 0);
|
|
|
|
if (buffer)
|
|
*bufflen = rq->data_len;
|
|
|
|
flags = rq->cmd_flags;
|
|
blk_put_request(rq);
|
|
|
|
/*
|
|
* FIXME: we should probably abort/retry or something in case of
|
|
* failure.
|
|
*/
|
|
if (flags & REQ_FAILED) {
|
|
/*
|
|
* The request failed. Retry if it was due to a unit
|
|
* attention status (usually means media was changed).
|
|
*/
|
|
struct request_sense *reqbuf = sense;
|
|
|
|
if (reqbuf->sense_key == UNIT_ATTENTION)
|
|
cdrom_saw_media_change(drive);
|
|
else if (reqbuf->sense_key == NOT_READY &&
|
|
reqbuf->asc == 4 && reqbuf->ascq != 4) {
|
|
/*
|
|
* The drive is in the process of loading
|
|
* a disk. Retry, but wait a little to give
|
|
* the drive time to complete the load.
|
|
*/
|
|
ssleep(2);
|
|
} else {
|
|
/* otherwise, don't retry */
|
|
retries = 0;
|
|
}
|
|
--retries;
|
|
}
|
|
|
|
/* end of retry loop */
|
|
} while ((flags & REQ_FAILED) && retries >= 0);
|
|
|
|
/* return an error if the command failed */
|
|
return (flags & REQ_FAILED) ? -EIO : 0;
|
|
}
|
|
|
|
/*
|
|
* Called from blk_end_request_callback() after the data of the request is
|
|
* completed and before the request itself is completed. By returning value '1',
|
|
* blk_end_request_callback() returns immediately without completing it.
|
|
*/
|
|
static int cdrom_newpc_intr_dummy_cb(struct request *rq)
|
|
{
|
|
return 1;
|
|
}
|
|
|
|
static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive)
|
|
{
|
|
ide_hwif_t *hwif = drive->hwif;
|
|
struct cdrom_info *info = drive->driver_data;
|
|
struct request *rq = HWGROUP(drive)->rq;
|
|
xfer_func_t *xferfunc;
|
|
ide_expiry_t *expiry = NULL;
|
|
int dma_error = 0, dma, stat, thislen, uptodate = 0;
|
|
int write = (rq_data_dir(rq) == WRITE) ? 1 : 0;
|
|
unsigned int timeout;
|
|
u16 len;
|
|
u8 ireason;
|
|
|
|
/* check for errors */
|
|
dma = info->dma;
|
|
if (dma) {
|
|
info->dma = 0;
|
|
dma_error = hwif->dma_ops->dma_end(drive);
|
|
if (dma_error) {
|
|
printk(KERN_ERR "%s: DMA %s error\n", drive->name,
|
|
write ? "write" : "read");
|
|
ide_dma_off(drive);
|
|
}
|
|
}
|
|
|
|
if (cdrom_decode_status(drive, 0, &stat))
|
|
return ide_stopped;
|
|
|
|
/* using dma, transfer is complete now */
|
|
if (dma) {
|
|
if (dma_error)
|
|
return ide_error(drive, "dma error", stat);
|
|
if (blk_fs_request(rq)) {
|
|
ide_end_request(drive, 1, rq->nr_sectors);
|
|
return ide_stopped;
|
|
}
|
|
goto end_request;
|
|
}
|
|
|
|
ide_read_bcount_and_ireason(drive, &len, &ireason);
|
|
|
|
thislen = blk_fs_request(rq) ? len : rq->data_len;
|
|
if (thislen > len)
|
|
thislen = len;
|
|
|
|
/* If DRQ is clear, the command has completed. */
|
|
if ((stat & DRQ_STAT) == 0) {
|
|
if (blk_fs_request(rq)) {
|
|
/*
|
|
* If we're not done reading/writing, complain.
|
|
* Otherwise, complete the command normally.
|
|
*/
|
|
uptodate = 1;
|
|
if (rq->current_nr_sectors > 0) {
|
|
printk(KERN_ERR "%s: %s: data underrun "
|
|
"(%d blocks)\n",
|
|
drive->name, __func__,
|
|
rq->current_nr_sectors);
|
|
if (!write)
|
|
rq->cmd_flags |= REQ_FAILED;
|
|
uptodate = 0;
|
|
}
|
|
cdrom_end_request(drive, uptodate);
|
|
return ide_stopped;
|
|
} else if (!blk_pc_request(rq)) {
|
|
ide_cd_request_sense_fixup(rq);
|
|
/* complain if we still have data left to transfer */
|
|
uptodate = rq->data_len ? 0 : 1;
|
|
}
|
|
goto end_request;
|
|
}
|
|
|
|
/* check which way to transfer data */
|
|
if (ide_cd_check_ireason(drive, rq, len, ireason, write))
|
|
return ide_stopped;
|
|
|
|
if (blk_fs_request(rq)) {
|
|
if (write == 0) {
|
|
int nskip;
|
|
|
|
if (ide_cd_check_transfer_size(drive, len)) {
|
|
cdrom_end_request(drive, 0);
|
|
return ide_stopped;
|
|
}
|
|
|
|
/*
|
|
* First, figure out if we need to bit-bucket
|
|
* any of the leading sectors.
|
|
*/
|
|
nskip = min_t(int, rq->current_nr_sectors
|
|
- bio_cur_sectors(rq->bio),
|
|
thislen >> 9);
|
|
if (nskip > 0) {
|
|
ide_pad_transfer(drive, write, nskip << 9);
|
|
rq->current_nr_sectors -= nskip;
|
|
thislen -= (nskip << 9);
|
|
}
|
|
}
|
|
}
|
|
|
|
if (ireason == 0) {
|
|
write = 1;
|
|
xferfunc = hwif->tp_ops->output_data;
|
|
} else {
|
|
write = 0;
|
|
xferfunc = hwif->tp_ops->input_data;
|
|
}
|
|
|
|
/* transfer data */
|
|
while (thislen > 0) {
|
|
u8 *ptr = blk_fs_request(rq) ? NULL : rq->data;
|
|
int blen = rq->data_len;
|
|
|
|
/* bio backed? */
|
|
if (rq->bio) {
|
|
if (blk_fs_request(rq)) {
|
|
ptr = rq->buffer;
|
|
blen = rq->current_nr_sectors << 9;
|
|
} else {
|
|
ptr = bio_data(rq->bio);
|
|
blen = bio_iovec(rq->bio)->bv_len;
|
|
}
|
|
}
|
|
|
|
if (!ptr) {
|
|
if (blk_fs_request(rq) && !write)
|
|
/*
|
|
* If the buffers are full, pipe the rest into
|
|
* oblivion.
|
|
*/
|
|
ide_pad_transfer(drive, 0, thislen);
|
|
else {
|
|
printk(KERN_ERR "%s: confused, missing data\n",
|
|
drive->name);
|
|
blk_dump_rq_flags(rq, rq_data_dir(rq)
|
|
? "cdrom_newpc_intr, write"
|
|
: "cdrom_newpc_intr, read");
|
|
}
|
|
break;
|
|
}
|
|
|
|
if (blen > thislen)
|
|
blen = thislen;
|
|
|
|
xferfunc(drive, NULL, ptr, blen);
|
|
|
|
thislen -= blen;
|
|
len -= blen;
|
|
|
|
if (blk_fs_request(rq)) {
|
|
rq->buffer += blen;
|
|
rq->nr_sectors -= (blen >> 9);
|
|
rq->current_nr_sectors -= (blen >> 9);
|
|
rq->sector += (blen >> 9);
|
|
|
|
if (rq->current_nr_sectors == 0 && rq->nr_sectors)
|
|
cdrom_end_request(drive, 1);
|
|
} else {
|
|
rq->data_len -= blen;
|
|
|
|
/*
|
|
* The request can't be completed until DRQ is cleared.
|
|
* So complete the data, but don't complete the request
|
|
* using the dummy function for the callback feature
|
|
* of blk_end_request_callback().
|
|
*/
|
|
if (rq->bio)
|
|
blk_end_request_callback(rq, 0, blen,
|
|
cdrom_newpc_intr_dummy_cb);
|
|
else
|
|
rq->data += blen;
|
|
}
|
|
if (!write && blk_sense_request(rq))
|
|
rq->sense_len += blen;
|
|
}
|
|
|
|
/* pad, if necessary */
|
|
if (!blk_fs_request(rq) && len > 0)
|
|
ide_pad_transfer(drive, write, len);
|
|
|
|
if (blk_pc_request(rq)) {
|
|
timeout = rq->timeout;
|
|
} else {
|
|
timeout = ATAPI_WAIT_PC;
|
|
if (!blk_fs_request(rq))
|
|
expiry = cdrom_timer_expiry;
|
|
}
|
|
|
|
ide_set_handler(drive, cdrom_newpc_intr, timeout, expiry);
|
|
return ide_started;
|
|
|
|
end_request:
|
|
if (blk_pc_request(rq)) {
|
|
unsigned long flags;
|
|
unsigned int dlen = rq->data_len;
|
|
|
|
if (dma)
|
|
rq->data_len = 0;
|
|
|
|
spin_lock_irqsave(&ide_lock, flags);
|
|
if (__blk_end_request(rq, 0, dlen))
|
|
BUG();
|
|
HWGROUP(drive)->rq = NULL;
|
|
spin_unlock_irqrestore(&ide_lock, flags);
|
|
} else {
|
|
if (!uptodate)
|
|
rq->cmd_flags |= REQ_FAILED;
|
|
cdrom_end_request(drive, uptodate);
|
|
}
|
|
return ide_stopped;
|
|
}
|
|
|
|
static ide_startstop_t cdrom_start_rw(ide_drive_t *drive, struct request *rq)
|
|
{
|
|
struct cdrom_info *cd = drive->driver_data;
|
|
int write = rq_data_dir(rq) == WRITE;
|
|
unsigned short sectors_per_frame =
|
|
queue_hardsect_size(drive->queue) >> SECTOR_BITS;
|
|
|
|
if (write) {
|
|
/* disk has become write protected */
|
|
if (get_disk_ro(cd->disk)) {
|
|
cdrom_end_request(drive, 0);
|
|
return ide_stopped;
|
|
}
|
|
} else {
|
|
/*
|
|
* We may be retrying this request after an error. Fix up any
|
|
* weirdness which might be present in the request packet.
|
|
*/
|
|
restore_request(rq);
|
|
}
|
|
|
|
/* use DMA, if possible / writes *must* be hardware frame aligned */
|
|
if ((rq->nr_sectors & (sectors_per_frame - 1)) ||
|
|
(rq->sector & (sectors_per_frame - 1))) {
|
|
if (write) {
|
|
cdrom_end_request(drive, 0);
|
|
return ide_stopped;
|
|
}
|
|
cd->dma = 0;
|
|
} else
|
|
cd->dma = drive->using_dma;
|
|
|
|
if (write)
|
|
cd->devinfo.media_written = 1;
|
|
|
|
return ide_started;
|
|
}
|
|
|
|
static ide_startstop_t cdrom_do_newpc_cont(ide_drive_t *drive)
|
|
{
|
|
struct request *rq = HWGROUP(drive)->rq;
|
|
|
|
return cdrom_transfer_packet_command(drive, rq, cdrom_newpc_intr);
|
|
}
|
|
|
|
static void cdrom_do_block_pc(ide_drive_t *drive, struct request *rq)
|
|
{
|
|
struct cdrom_info *info = drive->driver_data;
|
|
|
|
if (blk_pc_request(rq))
|
|
rq->cmd_flags |= REQ_QUIET;
|
|
else
|
|
rq->cmd_flags &= ~REQ_FAILED;
|
|
|
|
info->dma = 0;
|
|
|
|
/* sg request */
|
|
if (rq->bio || ((rq->cmd_type == REQ_TYPE_ATA_PC) && rq->data_len)) {
|
|
struct request_queue *q = drive->queue;
|
|
unsigned int alignment;
|
|
unsigned long addr;
|
|
unsigned long stack_mask = ~(THREAD_SIZE - 1);
|
|
|
|
if (rq->bio)
|
|
addr = (unsigned long)bio_data(rq->bio);
|
|
else
|
|
addr = (unsigned long)rq->data;
|
|
|
|
info->dma = drive->using_dma;
|
|
|
|
/*
|
|
* check if dma is safe
|
|
*
|
|
* NOTE! The "len" and "addr" checks should possibly have
|
|
* separate masks.
|
|
*/
|
|
alignment = queue_dma_alignment(q) | q->dma_pad_mask;
|
|
if (addr & alignment || rq->data_len & alignment)
|
|
info->dma = 0;
|
|
|
|
if (!((addr & stack_mask) ^
|
|
((unsigned long)current->stack & stack_mask)))
|
|
info->dma = 0;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* cdrom driver request routine.
|
|
*/
|
|
static ide_startstop_t ide_cd_do_request(ide_drive_t *drive, struct request *rq,
|
|
sector_t block)
|
|
{
|
|
struct cdrom_info *info = drive->driver_data;
|
|
ide_handler_t *fn;
|
|
int xferlen;
|
|
|
|
if (blk_fs_request(rq)) {
|
|
if (drive->atapi_flags & IDE_AFLAG_SEEKING) {
|
|
ide_hwif_t *hwif = drive->hwif;
|
|
unsigned long elapsed = jiffies - info->start_seek;
|
|
int stat = hwif->tp_ops->read_status(hwif);
|
|
|
|
if ((stat & SEEK_STAT) != SEEK_STAT) {
|
|
if (elapsed < IDECD_SEEK_TIMEOUT) {
|
|
ide_stall_queue(drive,
|
|
IDECD_SEEK_TIMER);
|
|
return ide_stopped;
|
|
}
|
|
printk(KERN_ERR "%s: DSC timeout\n",
|
|
drive->name);
|
|
}
|
|
drive->atapi_flags &= ~IDE_AFLAG_SEEKING;
|
|
}
|
|
if (rq_data_dir(rq) == READ &&
|
|
IDE_LARGE_SEEK(info->last_block, block,
|
|
IDECD_SEEK_THRESHOLD) &&
|
|
drive->dsc_overlap) {
|
|
xferlen = 0;
|
|
fn = cdrom_start_seek_continuation;
|
|
|
|
info->dma = 0;
|
|
info->start_seek = jiffies;
|
|
|
|
ide_cd_prepare_seek_request(drive, rq);
|
|
} else {
|
|
xferlen = 32768;
|
|
fn = cdrom_start_rw_cont;
|
|
|
|
if (cdrom_start_rw(drive, rq) == ide_stopped)
|
|
return ide_stopped;
|
|
|
|
if (ide_cd_prepare_rw_request(drive, rq) == ide_stopped)
|
|
return ide_stopped;
|
|
}
|
|
info->last_block = block;
|
|
} else if (blk_sense_request(rq) || blk_pc_request(rq) ||
|
|
rq->cmd_type == REQ_TYPE_ATA_PC) {
|
|
xferlen = rq->data_len;
|
|
fn = cdrom_do_newpc_cont;
|
|
|
|
if (!rq->timeout)
|
|
rq->timeout = ATAPI_WAIT_PC;
|
|
|
|
cdrom_do_block_pc(drive, rq);
|
|
} else if (blk_special_request(rq)) {
|
|
/* right now this can only be a reset... */
|
|
cdrom_end_request(drive, 1);
|
|
return ide_stopped;
|
|
} else {
|
|
blk_dump_rq_flags(rq, "ide-cd bad flags");
|
|
cdrom_end_request(drive, 0);
|
|
return ide_stopped;
|
|
}
|
|
|
|
return cdrom_start_packet_command(drive, xferlen, fn);
|
|
}
|
|
|
|
/*
|
|
* Ioctl handling.
|
|
*
|
|
* Routines which queue packet commands take as a final argument a pointer to a
|
|
* request_sense struct. If execution of the command results in an error with a
|
|
* CHECK CONDITION status, this structure will be filled with the results of the
|
|
* subsequent request sense command. The pointer can also be NULL, in which case
|
|
* no sense information is returned.
|
|
*/
|
|
static void msf_from_bcd(struct atapi_msf *msf)
|
|
{
|
|
msf->minute = bcd2bin(msf->minute);
|
|
msf->second = bcd2bin(msf->second);
|
|
msf->frame = bcd2bin(msf->frame);
|
|
}
|
|
|
|
int cdrom_check_status(ide_drive_t *drive, struct request_sense *sense)
|
|
{
|
|
struct cdrom_info *info = drive->driver_data;
|
|
struct cdrom_device_info *cdi = &info->devinfo;
|
|
unsigned char cmd[BLK_MAX_CDB];
|
|
|
|
memset(cmd, 0, BLK_MAX_CDB);
|
|
cmd[0] = GPCMD_TEST_UNIT_READY;
|
|
|
|
/*
|
|
* Sanyo 3 CD changer uses byte 7 of TEST_UNIT_READY to switch CDs
|
|
* instead of supporting the LOAD_UNLOAD opcode.
|
|
*/
|
|
cmd[7] = cdi->sanyo_slot % 3;
|
|
|
|
return ide_cd_queue_pc(drive, cmd, 0, NULL, NULL, sense, 0, REQ_QUIET);
|
|
}
|
|
|
|
static int cdrom_read_capacity(ide_drive_t *drive, unsigned long *capacity,
|
|
unsigned long *sectors_per_frame,
|
|
struct request_sense *sense)
|
|
{
|
|
struct {
|
|
__be32 lba;
|
|
__be32 blocklen;
|
|
} capbuf;
|
|
|
|
int stat;
|
|
unsigned char cmd[BLK_MAX_CDB];
|
|
unsigned len = sizeof(capbuf);
|
|
u32 blocklen;
|
|
|
|
memset(cmd, 0, BLK_MAX_CDB);
|
|
cmd[0] = GPCMD_READ_CDVD_CAPACITY;
|
|
|
|
stat = ide_cd_queue_pc(drive, cmd, 0, &capbuf, &len, sense, 0,
|
|
REQ_QUIET);
|
|
if (stat)
|
|
return stat;
|
|
|
|
/*
|
|
* Sanity check the given block size
|
|
*/
|
|
blocklen = be32_to_cpu(capbuf.blocklen);
|
|
switch (blocklen) {
|
|
case 512:
|
|
case 1024:
|
|
case 2048:
|
|
case 4096:
|
|
break;
|
|
default:
|
|
printk(KERN_ERR "%s: weird block size %u\n",
|
|
drive->name, blocklen);
|
|
printk(KERN_ERR "%s: default to 2kb block size\n",
|
|
drive->name);
|
|
blocklen = 2048;
|
|
break;
|
|
}
|
|
|
|
*capacity = 1 + be32_to_cpu(capbuf.lba);
|
|
*sectors_per_frame = blocklen >> SECTOR_BITS;
|
|
return 0;
|
|
}
|
|
|
|
static int cdrom_read_tocentry(ide_drive_t *drive, int trackno, int msf_flag,
|
|
int format, char *buf, int buflen,
|
|
struct request_sense *sense)
|
|
{
|
|
unsigned char cmd[BLK_MAX_CDB];
|
|
|
|
memset(cmd, 0, BLK_MAX_CDB);
|
|
|
|
cmd[0] = GPCMD_READ_TOC_PMA_ATIP;
|
|
cmd[6] = trackno;
|
|
cmd[7] = (buflen >> 8);
|
|
cmd[8] = (buflen & 0xff);
|
|
cmd[9] = (format << 6);
|
|
|
|
if (msf_flag)
|
|
cmd[1] = 2;
|
|
|
|
return ide_cd_queue_pc(drive, cmd, 0, buf, &buflen, sense, 0, REQ_QUIET);
|
|
}
|
|
|
|
/* Try to read the entire TOC for the disk into our internal buffer. */
|
|
int ide_cd_read_toc(ide_drive_t *drive, struct request_sense *sense)
|
|
{
|
|
int stat, ntracks, i;
|
|
struct cdrom_info *info = drive->driver_data;
|
|
struct cdrom_device_info *cdi = &info->devinfo;
|
|
struct atapi_toc *toc = info->toc;
|
|
struct {
|
|
struct atapi_toc_header hdr;
|
|
struct atapi_toc_entry ent;
|
|
} ms_tmp;
|
|
long last_written;
|
|
unsigned long sectors_per_frame = SECTORS_PER_FRAME;
|
|
|
|
if (toc == NULL) {
|
|
/* try to allocate space */
|
|
toc = kmalloc(sizeof(struct atapi_toc), GFP_KERNEL);
|
|
if (toc == NULL) {
|
|
printk(KERN_ERR "%s: No cdrom TOC buffer!\n",
|
|
drive->name);
|
|
return -ENOMEM;
|
|
}
|
|
info->toc = toc;
|
|
}
|
|
|
|
/*
|
|
* Check to see if the existing data is still valid. If it is,
|
|
* just return.
|
|
*/
|
|
(void) cdrom_check_status(drive, sense);
|
|
|
|
if (drive->atapi_flags & IDE_AFLAG_TOC_VALID)
|
|
return 0;
|
|
|
|
/* try to get the total cdrom capacity and sector size */
|
|
stat = cdrom_read_capacity(drive, &toc->capacity, §ors_per_frame,
|
|
sense);
|
|
if (stat)
|
|
toc->capacity = 0x1fffff;
|
|
|
|
set_capacity(info->disk, toc->capacity * sectors_per_frame);
|
|
/* save a private copy of the TOC capacity for error handling */
|
|
drive->probed_capacity = toc->capacity * sectors_per_frame;
|
|
|
|
blk_queue_hardsect_size(drive->queue,
|
|
sectors_per_frame << SECTOR_BITS);
|
|
|
|
/* first read just the header, so we know how long the TOC is */
|
|
stat = cdrom_read_tocentry(drive, 0, 1, 0, (char *) &toc->hdr,
|
|
sizeof(struct atapi_toc_header), sense);
|
|
if (stat)
|
|
return stat;
|
|
|
|
if (drive->atapi_flags & IDE_AFLAG_TOCTRACKS_AS_BCD) {
|
|
toc->hdr.first_track = bcd2bin(toc->hdr.first_track);
|
|
toc->hdr.last_track = bcd2bin(toc->hdr.last_track);
|
|
}
|
|
|
|
ntracks = toc->hdr.last_track - toc->hdr.first_track + 1;
|
|
if (ntracks <= 0)
|
|
return -EIO;
|
|
if (ntracks > MAX_TRACKS)
|
|
ntracks = MAX_TRACKS;
|
|
|
|
/* now read the whole schmeer */
|
|
stat = cdrom_read_tocentry(drive, toc->hdr.first_track, 1, 0,
|
|
(char *)&toc->hdr,
|
|
sizeof(struct atapi_toc_header) +
|
|
(ntracks + 1) *
|
|
sizeof(struct atapi_toc_entry), sense);
|
|
|
|
if (stat && toc->hdr.first_track > 1) {
|
|
/*
|
|
* Cds with CDI tracks only don't have any TOC entries, despite
|
|
* of this the returned values are
|
|
* first_track == last_track = number of CDI tracks + 1,
|
|
* so that this case is indistinguishable from the same layout
|
|
* plus an additional audio track. If we get an error for the
|
|
* regular case, we assume a CDI without additional audio
|
|
* tracks. In this case the readable TOC is empty (CDI tracks
|
|
* are not included) and only holds the Leadout entry.
|
|
*
|
|
* Heiko Eißfeldt.
|
|
*/
|
|
ntracks = 0;
|
|
stat = cdrom_read_tocentry(drive, CDROM_LEADOUT, 1, 0,
|
|
(char *)&toc->hdr,
|
|
sizeof(struct atapi_toc_header) +
|
|
(ntracks + 1) *
|
|
sizeof(struct atapi_toc_entry),
|
|
sense);
|
|
if (stat)
|
|
return stat;
|
|
|
|
if (drive->atapi_flags & IDE_AFLAG_TOCTRACKS_AS_BCD) {
|
|
toc->hdr.first_track = (u8)bin2bcd(CDROM_LEADOUT);
|
|
toc->hdr.last_track = (u8)bin2bcd(CDROM_LEADOUT);
|
|
} else {
|
|
toc->hdr.first_track = CDROM_LEADOUT;
|
|
toc->hdr.last_track = CDROM_LEADOUT;
|
|
}
|
|
}
|
|
|
|
if (stat)
|
|
return stat;
|
|
|
|
toc->hdr.toc_length = be16_to_cpu(toc->hdr.toc_length);
|
|
|
|
if (drive->atapi_flags & IDE_AFLAG_TOCTRACKS_AS_BCD) {
|
|
toc->hdr.first_track = bcd2bin(toc->hdr.first_track);
|
|
toc->hdr.last_track = bcd2bin(toc->hdr.last_track);
|
|
}
|
|
|
|
for (i = 0; i <= ntracks; i++) {
|
|
if (drive->atapi_flags & IDE_AFLAG_TOCADDR_AS_BCD) {
|
|
if (drive->atapi_flags & IDE_AFLAG_TOCTRACKS_AS_BCD)
|
|
toc->ent[i].track = bcd2bin(toc->ent[i].track);
|
|
msf_from_bcd(&toc->ent[i].addr.msf);
|
|
}
|
|
toc->ent[i].addr.lba = msf_to_lba(toc->ent[i].addr.msf.minute,
|
|
toc->ent[i].addr.msf.second,
|
|
toc->ent[i].addr.msf.frame);
|
|
}
|
|
|
|
if (toc->hdr.first_track != CDROM_LEADOUT) {
|
|
/* read the multisession information */
|
|
stat = cdrom_read_tocentry(drive, 0, 0, 1, (char *)&ms_tmp,
|
|
sizeof(ms_tmp), sense);
|
|
if (stat)
|
|
return stat;
|
|
|
|
toc->last_session_lba = be32_to_cpu(ms_tmp.ent.addr.lba);
|
|
} else {
|
|
ms_tmp.hdr.last_track = CDROM_LEADOUT;
|
|
ms_tmp.hdr.first_track = ms_tmp.hdr.last_track;
|
|
toc->last_session_lba = msf_to_lba(0, 2, 0); /* 0m 2s 0f */
|
|
}
|
|
|
|
if (drive->atapi_flags & IDE_AFLAG_TOCADDR_AS_BCD) {
|
|
/* re-read multisession information using MSF format */
|
|
stat = cdrom_read_tocentry(drive, 0, 1, 1, (char *)&ms_tmp,
|
|
sizeof(ms_tmp), sense);
|
|
if (stat)
|
|
return stat;
|
|
|
|
msf_from_bcd(&ms_tmp.ent.addr.msf);
|
|
toc->last_session_lba = msf_to_lba(ms_tmp.ent.addr.msf.minute,
|
|
ms_tmp.ent.addr.msf.second,
|
|
ms_tmp.ent.addr.msf.frame);
|
|
}
|
|
|
|
toc->xa_flag = (ms_tmp.hdr.first_track != ms_tmp.hdr.last_track);
|
|
|
|
/* now try to get the total cdrom capacity */
|
|
stat = cdrom_get_last_written(cdi, &last_written);
|
|
if (!stat && (last_written > toc->capacity)) {
|
|
toc->capacity = last_written;
|
|
set_capacity(info->disk, toc->capacity * sectors_per_frame);
|
|
drive->probed_capacity = toc->capacity * sectors_per_frame;
|
|
}
|
|
|
|
/* Remember that we've read this stuff. */
|
|
drive->atapi_flags |= IDE_AFLAG_TOC_VALID;
|
|
|
|
return 0;
|
|
}
|
|
|
|
int ide_cdrom_get_capabilities(ide_drive_t *drive, u8 *buf)
|
|
{
|
|
struct cdrom_info *info = drive->driver_data;
|
|
struct cdrom_device_info *cdi = &info->devinfo;
|
|
struct packet_command cgc;
|
|
int stat, attempts = 3, size = ATAPI_CAPABILITIES_PAGE_SIZE;
|
|
|
|
if ((drive->atapi_flags & IDE_AFLAG_FULL_CAPS_PAGE) == 0)
|
|
size -= ATAPI_CAPABILITIES_PAGE_PAD_SIZE;
|
|
|
|
init_cdrom_command(&cgc, buf, size, CGC_DATA_UNKNOWN);
|
|
do {
|
|
/* we seem to get stat=0x01,err=0x00 the first time (??) */
|
|
stat = cdrom_mode_sense(cdi, &cgc, GPMODE_CAPABILITIES_PAGE, 0);
|
|
if (!stat)
|
|
break;
|
|
} while (--attempts);
|
|
return stat;
|
|
}
|
|
|
|
void ide_cdrom_update_speed(ide_drive_t *drive, u8 *buf)
|
|
{
|
|
struct cdrom_info *cd = drive->driver_data;
|
|
u16 curspeed, maxspeed;
|
|
|
|
if (drive->atapi_flags & IDE_AFLAG_LE_SPEED_FIELDS) {
|
|
curspeed = le16_to_cpup((__le16 *)&buf[8 + 14]);
|
|
maxspeed = le16_to_cpup((__le16 *)&buf[8 + 8]);
|
|
} else {
|
|
curspeed = be16_to_cpup((__be16 *)&buf[8 + 14]);
|
|
maxspeed = be16_to_cpup((__be16 *)&buf[8 + 8]);
|
|
}
|
|
|
|
cd->current_speed = (curspeed + (176/2)) / 176;
|
|
cd->max_speed = (maxspeed + (176/2)) / 176;
|
|
}
|
|
|
|
#define IDE_CD_CAPABILITIES \
|
|
(CDC_CLOSE_TRAY | CDC_OPEN_TRAY | CDC_LOCK | CDC_SELECT_SPEED | \
|
|
CDC_SELECT_DISC | CDC_MULTI_SESSION | CDC_MCN | CDC_MEDIA_CHANGED | \
|
|
CDC_PLAY_AUDIO | CDC_RESET | CDC_DRIVE_STATUS | CDC_CD_R | \
|
|
CDC_CD_RW | CDC_DVD | CDC_DVD_R | CDC_DVD_RAM | CDC_GENERIC_PACKET | \
|
|
CDC_MO_DRIVE | CDC_MRW | CDC_MRW_W | CDC_RAM)
|
|
|
|
static struct cdrom_device_ops ide_cdrom_dops = {
|
|
.open = ide_cdrom_open_real,
|
|
.release = ide_cdrom_release_real,
|
|
.drive_status = ide_cdrom_drive_status,
|
|
.media_changed = ide_cdrom_check_media_change_real,
|
|
.tray_move = ide_cdrom_tray_move,
|
|
.lock_door = ide_cdrom_lock_door,
|
|
.select_speed = ide_cdrom_select_speed,
|
|
.get_last_session = ide_cdrom_get_last_session,
|
|
.get_mcn = ide_cdrom_get_mcn,
|
|
.reset = ide_cdrom_reset,
|
|
.audio_ioctl = ide_cdrom_audio_ioctl,
|
|
.capability = IDE_CD_CAPABILITIES,
|
|
.generic_packet = ide_cdrom_packet,
|
|
};
|
|
|
|
static int ide_cdrom_register(ide_drive_t *drive, int nslots)
|
|
{
|
|
struct cdrom_info *info = drive->driver_data;
|
|
struct cdrom_device_info *devinfo = &info->devinfo;
|
|
|
|
devinfo->ops = &ide_cdrom_dops;
|
|
devinfo->speed = info->current_speed;
|
|
devinfo->capacity = nslots;
|
|
devinfo->handle = drive;
|
|
strcpy(devinfo->name, drive->name);
|
|
|
|
if (drive->atapi_flags & IDE_AFLAG_NO_SPEED_SELECT)
|
|
devinfo->mask |= CDC_SELECT_SPEED;
|
|
|
|
devinfo->disk = info->disk;
|
|
return register_cdrom(devinfo);
|
|
}
|
|
|
|
static int ide_cdrom_probe_capabilities(ide_drive_t *drive)
|
|
{
|
|
struct cdrom_info *cd = drive->driver_data;
|
|
struct cdrom_device_info *cdi = &cd->devinfo;
|
|
u8 buf[ATAPI_CAPABILITIES_PAGE_SIZE];
|
|
mechtype_t mechtype;
|
|
int nslots = 1;
|
|
|
|
cdi->mask = (CDC_CD_R | CDC_CD_RW | CDC_DVD | CDC_DVD_R |
|
|
CDC_DVD_RAM | CDC_SELECT_DISC | CDC_PLAY_AUDIO |
|
|
CDC_MO_DRIVE | CDC_RAM);
|
|
|
|
if (drive->media == ide_optical) {
|
|
cdi->mask &= ~(CDC_MO_DRIVE | CDC_RAM);
|
|
printk(KERN_ERR "%s: ATAPI magneto-optical drive\n",
|
|
drive->name);
|
|
return nslots;
|
|
}
|
|
|
|
if (drive->atapi_flags & IDE_AFLAG_PRE_ATAPI12) {
|
|
drive->atapi_flags &= ~IDE_AFLAG_NO_EJECT;
|
|
cdi->mask &= ~CDC_PLAY_AUDIO;
|
|
return nslots;
|
|
}
|
|
|
|
/*
|
|
* We have to cheat a little here. the packet will eventually be queued
|
|
* with ide_cdrom_packet(), which extracts the drive from cdi->handle.
|
|
* Since this device hasn't been registered with the Uniform layer yet,
|
|
* it can't do this. Same goes for cdi->ops.
|
|
*/
|
|
cdi->handle = drive;
|
|
cdi->ops = &ide_cdrom_dops;
|
|
|
|
if (ide_cdrom_get_capabilities(drive, buf))
|
|
return 0;
|
|
|
|
if ((buf[8 + 6] & 0x01) == 0)
|
|
drive->atapi_flags |= IDE_AFLAG_NO_DOORLOCK;
|
|
if (buf[8 + 6] & 0x08)
|
|
drive->atapi_flags &= ~IDE_AFLAG_NO_EJECT;
|
|
if (buf[8 + 3] & 0x01)
|
|
cdi->mask &= ~CDC_CD_R;
|
|
if (buf[8 + 3] & 0x02)
|
|
cdi->mask &= ~(CDC_CD_RW | CDC_RAM);
|
|
if (buf[8 + 2] & 0x38)
|
|
cdi->mask &= ~CDC_DVD;
|
|
if (buf[8 + 3] & 0x20)
|
|
cdi->mask &= ~(CDC_DVD_RAM | CDC_RAM);
|
|
if (buf[8 + 3] & 0x10)
|
|
cdi->mask &= ~CDC_DVD_R;
|
|
if ((buf[8 + 4] & 0x01) || (drive->atapi_flags & IDE_AFLAG_PLAY_AUDIO_OK))
|
|
cdi->mask &= ~CDC_PLAY_AUDIO;
|
|
|
|
mechtype = buf[8 + 6] >> 5;
|
|
if (mechtype == mechtype_caddy ||
|
|
mechtype == mechtype_popup ||
|
|
(drive->atapi_flags & IDE_AFLAG_NO_AUTOCLOSE))
|
|
cdi->mask |= CDC_CLOSE_TRAY;
|
|
|
|
if (cdi->sanyo_slot > 0) {
|
|
cdi->mask &= ~CDC_SELECT_DISC;
|
|
nslots = 3;
|
|
} else if (mechtype == mechtype_individual_changer ||
|
|
mechtype == mechtype_cartridge_changer) {
|
|
nslots = cdrom_number_of_slots(cdi);
|
|
if (nslots > 1)
|
|
cdi->mask &= ~CDC_SELECT_DISC;
|
|
}
|
|
|
|
ide_cdrom_update_speed(drive, buf);
|
|
|
|
printk(KERN_INFO "%s: ATAPI", drive->name);
|
|
|
|
/* don't print speed if the drive reported 0 */
|
|
if (cd->max_speed)
|
|
printk(KERN_CONT " %dX", cd->max_speed);
|
|
|
|
printk(KERN_CONT " %s", (cdi->mask & CDC_DVD) ? "CD-ROM" : "DVD-ROM");
|
|
|
|
if ((cdi->mask & CDC_DVD_R) == 0 || (cdi->mask & CDC_DVD_RAM) == 0)
|
|
printk(KERN_CONT " DVD%s%s",
|
|
(cdi->mask & CDC_DVD_R) ? "" : "-R",
|
|
(cdi->mask & CDC_DVD_RAM) ? "" : "-RAM");
|
|
|
|
if ((cdi->mask & CDC_CD_R) == 0 || (cdi->mask & CDC_CD_RW) == 0)
|
|
printk(KERN_CONT " CD%s%s",
|
|
(cdi->mask & CDC_CD_R) ? "" : "-R",
|
|
(cdi->mask & CDC_CD_RW) ? "" : "/RW");
|
|
|
|
if ((cdi->mask & CDC_SELECT_DISC) == 0)
|
|
printk(KERN_CONT " changer w/%d slots", nslots);
|
|
else
|
|
printk(KERN_CONT " drive");
|
|
|
|
printk(KERN_CONT ", %dkB Cache\n", be16_to_cpup((__be16 *)&buf[8 + 12]));
|
|
|
|
return nslots;
|
|
}
|
|
|
|
/* standard prep_rq_fn that builds 10 byte cmds */
|
|
static int ide_cdrom_prep_fs(struct request_queue *q, struct request *rq)
|
|
{
|
|
int hard_sect = queue_hardsect_size(q);
|
|
long block = (long)rq->hard_sector / (hard_sect >> 9);
|
|
unsigned long blocks = rq->hard_nr_sectors / (hard_sect >> 9);
|
|
|
|
memset(rq->cmd, 0, BLK_MAX_CDB);
|
|
|
|
if (rq_data_dir(rq) == READ)
|
|
rq->cmd[0] = GPCMD_READ_10;
|
|
else
|
|
rq->cmd[0] = GPCMD_WRITE_10;
|
|
|
|
/*
|
|
* fill in lba
|
|
*/
|
|
rq->cmd[2] = (block >> 24) & 0xff;
|
|
rq->cmd[3] = (block >> 16) & 0xff;
|
|
rq->cmd[4] = (block >> 8) & 0xff;
|
|
rq->cmd[5] = block & 0xff;
|
|
|
|
/*
|
|
* and transfer length
|
|
*/
|
|
rq->cmd[7] = (blocks >> 8) & 0xff;
|
|
rq->cmd[8] = blocks & 0xff;
|
|
rq->cmd_len = 10;
|
|
return BLKPREP_OK;
|
|
}
|
|
|
|
/*
|
|
* Most of the SCSI commands are supported directly by ATAPI devices.
|
|
* This transform handles the few exceptions.
|
|
*/
|
|
static int ide_cdrom_prep_pc(struct request *rq)
|
|
{
|
|
u8 *c = rq->cmd;
|
|
|
|
/* transform 6-byte read/write commands to the 10-byte version */
|
|
if (c[0] == READ_6 || c[0] == WRITE_6) {
|
|
c[8] = c[4];
|
|
c[5] = c[3];
|
|
c[4] = c[2];
|
|
c[3] = c[1] & 0x1f;
|
|
c[2] = 0;
|
|
c[1] &= 0xe0;
|
|
c[0] += (READ_10 - READ_6);
|
|
rq->cmd_len = 10;
|
|
return BLKPREP_OK;
|
|
}
|
|
|
|
/*
|
|
* it's silly to pretend we understand 6-byte sense commands, just
|
|
* reject with ILLEGAL_REQUEST and the caller should take the
|
|
* appropriate action
|
|
*/
|
|
if (c[0] == MODE_SENSE || c[0] == MODE_SELECT) {
|
|
rq->errors = ILLEGAL_REQUEST;
|
|
return BLKPREP_KILL;
|
|
}
|
|
|
|
return BLKPREP_OK;
|
|
}
|
|
|
|
static int ide_cdrom_prep_fn(struct request_queue *q, struct request *rq)
|
|
{
|
|
if (blk_fs_request(rq))
|
|
return ide_cdrom_prep_fs(q, rq);
|
|
else if (blk_pc_request(rq))
|
|
return ide_cdrom_prep_pc(rq);
|
|
|
|
return 0;
|
|
}
|
|
|
|
struct cd_list_entry {
|
|
const char *id_model;
|
|
const char *id_firmware;
|
|
unsigned int cd_flags;
|
|
};
|
|
|
|
#ifdef CONFIG_IDE_PROC_FS
|
|
static sector_t ide_cdrom_capacity(ide_drive_t *drive)
|
|
{
|
|
unsigned long capacity, sectors_per_frame;
|
|
|
|
if (cdrom_read_capacity(drive, &capacity, §ors_per_frame, NULL))
|
|
return 0;
|
|
|
|
return capacity * sectors_per_frame;
|
|
}
|
|
|
|
static int proc_idecd_read_capacity(char *page, char **start, off_t off,
|
|
int count, int *eof, void *data)
|
|
{
|
|
ide_drive_t *drive = data;
|
|
int len;
|
|
|
|
len = sprintf(page, "%llu\n", (long long)ide_cdrom_capacity(drive));
|
|
PROC_IDE_READ_RETURN(page, start, off, count, eof, len);
|
|
}
|
|
|
|
static ide_proc_entry_t idecd_proc[] = {
|
|
{ "capacity", S_IFREG|S_IRUGO, proc_idecd_read_capacity, NULL },
|
|
{ NULL, 0, NULL, NULL }
|
|
};
|
|
|
|
static void ide_cdrom_add_settings(ide_drive_t *drive)
|
|
{
|
|
ide_add_setting(drive, "dsc_overlap", SETTING_RW, TYPE_BYTE, 0, 1, 1, 1,
|
|
&drive->dsc_overlap, NULL);
|
|
}
|
|
#else
|
|
static inline void ide_cdrom_add_settings(ide_drive_t *drive) { ; }
|
|
#endif
|
|
|
|
static const struct cd_list_entry ide_cd_quirks_list[] = {
|
|
/* Limit transfer size per interrupt. */
|
|
{ "SAMSUNG CD-ROM SCR-2430", NULL, IDE_AFLAG_LIMIT_NFRAMES },
|
|
{ "SAMSUNG CD-ROM SCR-2432", NULL, IDE_AFLAG_LIMIT_NFRAMES },
|
|
/* SCR-3231 doesn't support the SET_CD_SPEED command. */
|
|
{ "SAMSUNG CD-ROM SCR-3231", NULL, IDE_AFLAG_NO_SPEED_SELECT },
|
|
/* Old NEC260 (not R) was released before ATAPI 1.2 spec. */
|
|
{ "NEC CD-ROM DRIVE:260", "1.01", IDE_AFLAG_TOCADDR_AS_BCD |
|
|
IDE_AFLAG_PRE_ATAPI12, },
|
|
/* Vertos 300, some versions of this drive like to talk BCD. */
|
|
{ "V003S0DS", NULL, IDE_AFLAG_VERTOS_300_SSD, },
|
|
/* Vertos 600 ESD. */
|
|
{ "V006E0DS", NULL, IDE_AFLAG_VERTOS_600_ESD, },
|
|
/*
|
|
* Sanyo 3 CD changer uses a non-standard command for CD changing
|
|
* (by default standard ATAPI support for CD changers is used).
|
|
*/
|
|
{ "CD-ROM CDR-C3 G", NULL, IDE_AFLAG_SANYO_3CD },
|
|
{ "CD-ROM CDR-C3G", NULL, IDE_AFLAG_SANYO_3CD },
|
|
{ "CD-ROM CDR_C36", NULL, IDE_AFLAG_SANYO_3CD },
|
|
/* Stingray 8X CD-ROM. */
|
|
{ "STINGRAY 8422 IDE 8X CD-ROM 7-27-95", NULL, IDE_AFLAG_PRE_ATAPI12 },
|
|
/*
|
|
* ACER 50X CD-ROM and WPI 32X CD-ROM require the full spec length
|
|
* mode sense page capabilities size, but older drives break.
|
|
*/
|
|
{ "ATAPI CD ROM DRIVE 50X MAX", NULL, IDE_AFLAG_FULL_CAPS_PAGE },
|
|
{ "WPI CDS-32X", NULL, IDE_AFLAG_FULL_CAPS_PAGE },
|
|
/* ACER/AOpen 24X CD-ROM has the speed fields byte-swapped. */
|
|
{ "", "241N", IDE_AFLAG_LE_SPEED_FIELDS },
|
|
/*
|
|
* Some drives used by Apple don't advertise audio play
|
|
* but they do support reading TOC & audio datas.
|
|
*/
|
|
{ "MATSHITADVD-ROM SR-8187", NULL, IDE_AFLAG_PLAY_AUDIO_OK },
|
|
{ "MATSHITADVD-ROM SR-8186", NULL, IDE_AFLAG_PLAY_AUDIO_OK },
|
|
{ "MATSHITADVD-ROM SR-8176", NULL, IDE_AFLAG_PLAY_AUDIO_OK },
|
|
{ "MATSHITADVD-ROM SR-8174", NULL, IDE_AFLAG_PLAY_AUDIO_OK },
|
|
{ "Optiarc DVD RW AD-5200A", NULL, IDE_AFLAG_PLAY_AUDIO_OK },
|
|
{ "Optiarc DVD RW AD-7200A", NULL, IDE_AFLAG_PLAY_AUDIO_OK },
|
|
{ "Optiarc DVD RW AD-7543A", NULL, IDE_AFLAG_NO_AUTOCLOSE },
|
|
{ NULL, NULL, 0 }
|
|
};
|
|
|
|
static unsigned int ide_cd_flags(struct hd_driveid *id)
|
|
{
|
|
const struct cd_list_entry *cle = ide_cd_quirks_list;
|
|
|
|
while (cle->id_model) {
|
|
if (strcmp(cle->id_model, id->model) == 0 &&
|
|
(cle->id_firmware == NULL ||
|
|
strstr(id->fw_rev, cle->id_firmware)))
|
|
return cle->cd_flags;
|
|
cle++;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ide_cdrom_setup(ide_drive_t *drive)
|
|
{
|
|
struct cdrom_info *cd = drive->driver_data;
|
|
struct cdrom_device_info *cdi = &cd->devinfo;
|
|
struct hd_driveid *id = drive->id;
|
|
int nslots;
|
|
|
|
blk_queue_prep_rq(drive->queue, ide_cdrom_prep_fn);
|
|
blk_queue_dma_alignment(drive->queue, 31);
|
|
blk_queue_update_dma_pad(drive->queue, 15);
|
|
drive->queue->unplug_delay = (1 * HZ) / 1000;
|
|
if (!drive->queue->unplug_delay)
|
|
drive->queue->unplug_delay = 1;
|
|
|
|
drive->special.all = 0;
|
|
|
|
drive->atapi_flags = IDE_AFLAG_MEDIA_CHANGED | IDE_AFLAG_NO_EJECT |
|
|
ide_cd_flags(id);
|
|
|
|
if ((id->config & 0x0060) == 0x20)
|
|
drive->atapi_flags |= IDE_AFLAG_DRQ_INTERRUPT;
|
|
|
|
if ((drive->atapi_flags & IDE_AFLAG_VERTOS_300_SSD) &&
|
|
id->fw_rev[4] == '1' && id->fw_rev[6] <= '2')
|
|
drive->atapi_flags |= (IDE_AFLAG_TOCTRACKS_AS_BCD |
|
|
IDE_AFLAG_TOCADDR_AS_BCD);
|
|
else if ((drive->atapi_flags & IDE_AFLAG_VERTOS_600_ESD) &&
|
|
id->fw_rev[4] == '1' && id->fw_rev[6] <= '2')
|
|
drive->atapi_flags |= IDE_AFLAG_TOCTRACKS_AS_BCD;
|
|
else if (drive->atapi_flags & IDE_AFLAG_SANYO_3CD)
|
|
/* 3 => use CD in slot 0 */
|
|
cdi->sanyo_slot = 3;
|
|
|
|
nslots = ide_cdrom_probe_capabilities(drive);
|
|
|
|
/* set correct block size */
|
|
blk_queue_hardsect_size(drive->queue, CD_FRAMESIZE);
|
|
|
|
drive->dsc_overlap = (drive->next != drive);
|
|
|
|
if (ide_cdrom_register(drive, nslots)) {
|
|
printk(KERN_ERR "%s: %s failed to register device with the"
|
|
" cdrom driver.\n", drive->name, __func__);
|
|
cd->devinfo.handle = NULL;
|
|
return 1;
|
|
}
|
|
ide_cdrom_add_settings(drive);
|
|
return 0;
|
|
}
|
|
|
|
static void ide_cd_remove(ide_drive_t *drive)
|
|
{
|
|
struct cdrom_info *info = drive->driver_data;
|
|
|
|
ide_proc_unregister_driver(drive, info->driver);
|
|
|
|
del_gendisk(info->disk);
|
|
|
|
ide_cd_put(info);
|
|
}
|
|
|
|
static void ide_cd_release(struct kref *kref)
|
|
{
|
|
struct cdrom_info *info = to_ide_cd(kref);
|
|
struct cdrom_device_info *devinfo = &info->devinfo;
|
|
ide_drive_t *drive = info->drive;
|
|
struct gendisk *g = info->disk;
|
|
|
|
kfree(info->toc);
|
|
if (devinfo->handle == drive)
|
|
unregister_cdrom(devinfo);
|
|
drive->dsc_overlap = 0;
|
|
drive->driver_data = NULL;
|
|
blk_queue_prep_rq(drive->queue, NULL);
|
|
g->private_data = NULL;
|
|
put_disk(g);
|
|
kfree(info);
|
|
}
|
|
|
|
static int ide_cd_probe(ide_drive_t *);
|
|
|
|
static ide_driver_t ide_cdrom_driver = {
|
|
.gen_driver = {
|
|
.owner = THIS_MODULE,
|
|
.name = "ide-cdrom",
|
|
.bus = &ide_bus_type,
|
|
},
|
|
.probe = ide_cd_probe,
|
|
.remove = ide_cd_remove,
|
|
.version = IDECD_VERSION,
|
|
.media = ide_cdrom,
|
|
.supports_dsc_overlap = 1,
|
|
.do_request = ide_cd_do_request,
|
|
.end_request = ide_end_request,
|
|
.error = __ide_error,
|
|
#ifdef CONFIG_IDE_PROC_FS
|
|
.proc = idecd_proc,
|
|
#endif
|
|
};
|
|
|
|
static int idecd_open(struct inode *inode, struct file *file)
|
|
{
|
|
struct gendisk *disk = inode->i_bdev->bd_disk;
|
|
struct cdrom_info *info;
|
|
int rc = -ENOMEM;
|
|
|
|
info = ide_cd_get(disk);
|
|
if (!info)
|
|
return -ENXIO;
|
|
|
|
rc = cdrom_open(&info->devinfo, inode, file);
|
|
|
|
if (rc < 0)
|
|
ide_cd_put(info);
|
|
|
|
return rc;
|
|
}
|
|
|
|
static int idecd_release(struct inode *inode, struct file *file)
|
|
{
|
|
struct gendisk *disk = inode->i_bdev->bd_disk;
|
|
struct cdrom_info *info = ide_cd_g(disk);
|
|
|
|
cdrom_release(&info->devinfo, file);
|
|
|
|
ide_cd_put(info);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int idecd_set_spindown(struct cdrom_device_info *cdi, unsigned long arg)
|
|
{
|
|
struct packet_command cgc;
|
|
char buffer[16];
|
|
int stat;
|
|
char spindown;
|
|
|
|
if (copy_from_user(&spindown, (void __user *)arg, sizeof(char)))
|
|
return -EFAULT;
|
|
|
|
init_cdrom_command(&cgc, buffer, sizeof(buffer), CGC_DATA_UNKNOWN);
|
|
|
|
stat = cdrom_mode_sense(cdi, &cgc, GPMODE_CDROM_PAGE, 0);
|
|
if (stat)
|
|
return stat;
|
|
|
|
buffer[11] = (buffer[11] & 0xf0) | (spindown & 0x0f);
|
|
return cdrom_mode_select(cdi, &cgc);
|
|
}
|
|
|
|
static int idecd_get_spindown(struct cdrom_device_info *cdi, unsigned long arg)
|
|
{
|
|
struct packet_command cgc;
|
|
char buffer[16];
|
|
int stat;
|
|
char spindown;
|
|
|
|
init_cdrom_command(&cgc, buffer, sizeof(buffer), CGC_DATA_UNKNOWN);
|
|
|
|
stat = cdrom_mode_sense(cdi, &cgc, GPMODE_CDROM_PAGE, 0);
|
|
if (stat)
|
|
return stat;
|
|
|
|
spindown = buffer[11] & 0x0f;
|
|
if (copy_to_user((void __user *)arg, &spindown, sizeof(char)))
|
|
return -EFAULT;
|
|
return 0;
|
|
}
|
|
|
|
static int idecd_ioctl(struct inode *inode, struct file *file,
|
|
unsigned int cmd, unsigned long arg)
|
|
{
|
|
struct block_device *bdev = inode->i_bdev;
|
|
struct cdrom_info *info = ide_cd_g(bdev->bd_disk);
|
|
int err;
|
|
|
|
switch (cmd) {
|
|
case CDROMSETSPINDOWN:
|
|
return idecd_set_spindown(&info->devinfo, arg);
|
|
case CDROMGETSPINDOWN:
|
|
return idecd_get_spindown(&info->devinfo, arg);
|
|
default:
|
|
break;
|
|
}
|
|
|
|
err = generic_ide_ioctl(info->drive, file, bdev, cmd, arg);
|
|
if (err == -EINVAL)
|
|
err = cdrom_ioctl(file, &info->devinfo, inode, cmd, arg);
|
|
|
|
return err;
|
|
}
|
|
|
|
static int idecd_media_changed(struct gendisk *disk)
|
|
{
|
|
struct cdrom_info *info = ide_cd_g(disk);
|
|
return cdrom_media_changed(&info->devinfo);
|
|
}
|
|
|
|
static int idecd_revalidate_disk(struct gendisk *disk)
|
|
{
|
|
struct cdrom_info *info = ide_cd_g(disk);
|
|
struct request_sense sense;
|
|
|
|
ide_cd_read_toc(info->drive, &sense);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct block_device_operations idecd_ops = {
|
|
.owner = THIS_MODULE,
|
|
.open = idecd_open,
|
|
.release = idecd_release,
|
|
.ioctl = idecd_ioctl,
|
|
.media_changed = idecd_media_changed,
|
|
.revalidate_disk = idecd_revalidate_disk
|
|
};
|
|
|
|
/* module options */
|
|
static char *ignore;
|
|
|
|
module_param(ignore, charp, 0400);
|
|
MODULE_DESCRIPTION("ATAPI CD-ROM Driver");
|
|
|
|
static int ide_cd_probe(ide_drive_t *drive)
|
|
{
|
|
struct cdrom_info *info;
|
|
struct gendisk *g;
|
|
struct request_sense sense;
|
|
|
|
if (!strstr("ide-cdrom", drive->driver_req))
|
|
goto failed;
|
|
if (!drive->present)
|
|
goto failed;
|
|
if (drive->media != ide_cdrom && drive->media != ide_optical)
|
|
goto failed;
|
|
/* skip drives that we were told to ignore */
|
|
if (ignore != NULL) {
|
|
if (strstr(ignore, drive->name)) {
|
|
printk(KERN_INFO "ide-cd: ignoring drive %s\n",
|
|
drive->name);
|
|
goto failed;
|
|
}
|
|
}
|
|
info = kzalloc(sizeof(struct cdrom_info), GFP_KERNEL);
|
|
if (info == NULL) {
|
|
printk(KERN_ERR "%s: Can't allocate a cdrom structure\n",
|
|
drive->name);
|
|
goto failed;
|
|
}
|
|
|
|
g = alloc_disk(1 << PARTN_BITS);
|
|
if (!g)
|
|
goto out_free_cd;
|
|
|
|
ide_init_disk(g, drive);
|
|
|
|
ide_proc_register_driver(drive, &ide_cdrom_driver);
|
|
|
|
kref_init(&info->kref);
|
|
|
|
info->drive = drive;
|
|
info->driver = &ide_cdrom_driver;
|
|
info->disk = g;
|
|
|
|
g->private_data = &info->driver;
|
|
|
|
drive->driver_data = info;
|
|
|
|
g->minors = 1;
|
|
g->driverfs_dev = &drive->gendev;
|
|
g->flags = GENHD_FL_CD | GENHD_FL_REMOVABLE;
|
|
if (ide_cdrom_setup(drive)) {
|
|
ide_proc_unregister_driver(drive, &ide_cdrom_driver);
|
|
ide_cd_release(&info->kref);
|
|
goto failed;
|
|
}
|
|
|
|
ide_cd_read_toc(drive, &sense);
|
|
g->fops = &idecd_ops;
|
|
g->flags |= GENHD_FL_REMOVABLE;
|
|
add_disk(g);
|
|
return 0;
|
|
|
|
out_free_cd:
|
|
kfree(info);
|
|
failed:
|
|
return -ENODEV;
|
|
}
|
|
|
|
static void __exit ide_cdrom_exit(void)
|
|
{
|
|
driver_unregister(&ide_cdrom_driver.gen_driver);
|
|
}
|
|
|
|
static int __init ide_cdrom_init(void)
|
|
{
|
|
return driver_register(&ide_cdrom_driver.gen_driver);
|
|
}
|
|
|
|
MODULE_ALIAS("ide:*m-cdrom*");
|
|
MODULE_ALIAS("ide-cd");
|
|
module_init(ide_cdrom_init);
|
|
module_exit(ide_cdrom_exit);
|
|
MODULE_LICENSE("GPL");
|