Sreekanth Reddy 5aeeb78aeb mpt2sas, mpt3sas: Abort initialization if no memory I/O resources detected ... Driver crashes if the BIOS do not set up at least one memory I/O resource. This failure can happen if the device is too slow to respond during POST and is missed by the BIOS, but Linux then detects the device later in the boot process. Based on a patch from Timothy Pearson <tpearson@raptorengineeringinc.com> Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@avagotech.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>		2015-08-26 10:56:35 -07:00
..
aacraid	…
aic7xxx	…
aic94xx	scsi: Do not set cmd_per_lun to 1 in the host template	2015-05-31 18:06:28 -07:00
arcmsr	…
arm	scsi: Do not set cmd_per_lun to 1 in the host template	2015-05-31 18:06:28 -07:00
be2iscsi	…
bfa	bfa: fix leak of bfad_im_port_index on module unload	2015-08-12 11:31:28 -07:00
bnx2fc	…
bnx2i	bnx2i: Fix call trace while device reset	2015-06-02 17:15:24 -07:00
csiostor	…
cxgbi	libcxgbi: use kvfree() in cxgbi_free_big_mem()	2015-06-30 19:45:00 -07:00
cxlflash	cxlflash: Base support for IBM CXL Flash Adapter	2015-07-30 21:02:01 -07:00
device_handler	…
dpt	…
esas2r	…
fcoe	…
fnic	x86/mm: Decouple <linux/vmalloc.h> from <asm/io.h>	2015-06-03 12:02:00 +02:00
ibmvscsi	…
isci	scsi: Do not set cmd_per_lun to 1 in the host template	2015-05-31 18:06:28 -07:00
libfc	libfc: Fix a typo in a source code comment	2015-08-12 11:21:43 -07:00
libsas	…
lpfc	SCSI misc on 20150622	2015-06-23 15:55:44 -07:00
megaraid	megaraid_sas: fix whitespace errors	2015-08-26 07:36:51 -07:00
mpt2sas	mpt2sas, mpt3sas: Abort initialization if no memory I/O resources detected	2015-08-26 10:56:35 -07:00
mpt3sas	mpt2sas, mpt3sas: Abort initialization if no memory I/O resources detected	2015-08-26 10:56:35 -07:00
mvsas	mvsas: always iounmap resources	2015-08-12 11:18:47 -07:00
osd	…
pcmcia	scsi: Do not set cmd_per_lun to 1 in the host template	2015-05-31 18:06:28 -07:00
pm8001	pm80xx: Added pm8006 controller support	2015-08-12 11:11:14 -07:00
qla2xxx	qla2xxx: Avoid that sparse complains about context imbalances	2015-08-26 10:46:04 -07:00
qla4xxx	Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next	2015-06-24 16:49:49 -07:00
snic	snic: driver for Cisco SCSI HBA	2015-06-19 16:57:51 -07:00
sym53c8xx_2	…
ufs	SCSI misc on 20150622	2015-06-23 15:55:44 -07:00
.gitignore	…
3w-9xxx.c	…
3w-9xxx.h	…
3w-sas.c	…
3w-sas.h	…
3w-xxxx.c	…
3w-xxxx.h	…
53c700.c	…
53c700.h	…
53c700.scr	…
53c700_d.h_shipped	…
BusLogic.c	…
BusLogic.h	…
FlashPoint.c	…
Kconfig	cxlflash: Base support for IBM CXL Flash Adapter	2015-07-30 21:02:01 -07:00
Makefile	cxlflash: Base support for IBM CXL Flash Adapter	2015-07-30 21:02:01 -07:00
NCR53c406a.c	scsi: Do not set cmd_per_lun to 1 in the host template	2015-05-31 18:06:28 -07:00
NCR5380.c	…
NCR5380.h	…
NCR_D700.c	…
NCR_D700.h	…
NCR_Q720.c	…
NCR_Q720.h	…
a100u2w.c	scsi: Do not set cmd_per_lun to 1 in the host template	2015-05-31 18:06:28 -07:00
a100u2w.h	…
a2091.c	…
a2091.h	…
a3000.c	…
a3000.h	…
a4000t.c	…
advansys.c	advansys: fix compilation errors and warnings when CONFIG_PCI is not set	2015-06-13 08:42:36 -07:00
aha152x.c	scsi: Do not set cmd_per_lun to 1 in the host template	2015-05-31 18:06:28 -07:00
aha152x.h	…
aha1542.c	scsi: Do not set cmd_per_lun to 1 in the host template	2015-05-31 18:06:28 -07:00
aha1542.h	…
aha1740.c	scsi: Do not set cmd_per_lun to 1 in the host template	2015-05-31 18:06:28 -07:00
aha1740.h	scsi: Do not set cmd_per_lun to 1 in the host template	2015-05-31 18:06:28 -07:00
am53c974.c	…
atari_NCR5380.c	…
atari_scsi.c	…
atp870u.c	scsi: Do not set cmd_per_lun to 1 in the host template	2015-05-31 18:06:28 -07:00
atp870u.h	scsi: Do not set cmd_per_lun to 1 in the host template	2015-05-31 18:06:28 -07:00
bvme6000_scsi.c	…
ch.c	…
constants.c	…
dc395x.c	…
dc395x.h	…
dmx3191d.c	…
dpt_i2o.c	scsi: Do not set cmd_per_lun to 1 in the host template	2015-05-31 18:06:28 -07:00
dpti.h	…
dtc.c	…
dtc.h	…
eata.c	…
eata_generic.h	…
eata_pio.c	…
eata_pio.h	…
esp_scsi.c	…
esp_scsi.h	…
fdomain.c	scsi: Do not set cmd_per_lun to 1 in the host template	2015-05-31 18:06:28 -07:00
fdomain.h	…
g_NCR5380.c	…
g_NCR5380.h	…
g_NCR5380_mmio.c	…
gdth.c	…
gdth.h	…
gdth_ioctl.h	…
gdth_proc.c	…
gdth_proc.h	…
gvp11.c	…
gvp11.h	…
hosts.c	…
hpsa.c	hpsa: fix an sprintf() overflow in the reset handler	2015-07-30 13:11:40 -07:00
hpsa.h	hpsa: cleanup reset	2015-05-31 17:47:31 -07:00
hpsa_cmd.h	hpsa: cleanup reset	2015-05-31 17:47:31 -07:00
hptiop.c	hptiop: Support HighPoint RR36xx HBAs and Support SAS tape and SAS media changer	2015-08-12 13:14:57 -07:00
hptiop.h	hptiop: Support HighPoint RR36xx HBAs and Support SAS tape and SAS media changer	2015-08-12 13:14:57 -07:00
imm.c	scsi: Do not set cmd_per_lun to 1 in the host template	2015-05-31 18:06:28 -07:00
imm.h	…
in2000.c	…
in2000.h	…
initio.c	scsi: Do not set cmd_per_lun to 1 in the host template	2015-05-31 18:06:28 -07:00
initio.h	…
ipr.c	ipr: Endian / sparse fixes	2015-07-30 12:41:21 -07:00
ipr.h	ipr: Driver version 2.6.2	2015-07-30 12:41:47 -07:00
ips.c	ips: remove pointless #warning	2015-06-02 17:24:54 -07:00
ips.h	…
iscsi_boot_sysfs.c	…
iscsi_tcp.c	…
iscsi_tcp.h	…
jazz_esp.c	…
lasi700.c	…
libiscsi.c	…
libiscsi_tcp.c	…
mac53c94.c	scsi: Do not set cmd_per_lun to 1 in the host template	2015-05-31 18:06:28 -07:00
mac53c94.h	…
mac_esp.c	…
mac_scsi.c	…
megaraid.c	megaraid : use dev_printk when possible	2015-08-26 07:23:04 -07:00
megaraid.h	…
mesh.c	…
mesh.h	…
mvme16x_scsi.c	…
mvme147.c	…
mvme147.h	…
mvumi.c	…
mvumi.h	…
ncr53c8xx.c	…
ncr53c8xx.h	…
nsp32.c	scsi: Do not set cmd_per_lun to 1 in the host template	2015-05-31 18:06:28 -07:00
nsp32.h	…
nsp32_debug.c	…
nsp32_io.h	…
osst.c	…
osst.h	…
osst_detect.h	…
osst_options.h	…
pas16.c	…
pas16.h	…
pmcraid.c	…
pmcraid.h	…
ppa.c	scsi: Do not set cmd_per_lun to 1 in the host template	2015-05-31 18:06:28 -07:00
ppa.h	…
ps3rom.c	scsi: Do not set cmd_per_lun to 1 in the host template	2015-05-31 18:06:28 -07:00
qla1280.c	scsi: Do not set cmd_per_lun to 1 in the host template	2015-05-31 18:06:28 -07:00
qla1280.h	…
qlogicfas.c	scsi: Do not set cmd_per_lun to 1 in the host template	2015-05-31 18:06:28 -07:00
qlogicfas408.c	…
qlogicfas408.h	…
qlogicpti.c	scsi: Do not set cmd_per_lun to 1 in the host template	2015-05-31 18:06:28 -07:00
qlogicpti.h	…
raid_class.c	…
script_asm.pl	…
scsi.c	Move code that is used both by initiator and target drivers	2015-06-01 07:32:43 -07:00
scsi.h	…
scsi_common.c	Move code that is used both by initiator and target drivers	2015-06-01 07:32:43 -07:00
scsi_debug.c	drivers/scsi/scsi_debug.c: resolve sg buffer const-ness issue	2015-06-30 19:44:59 -07:00
scsi_devinfo.c	…
scsi_error.c	scsi: Add ALUA state change UA handling	2015-08-26 07:19:57 -07:00
scsi_ioctl.c	…
scsi_lib.c	scsi: Add ALUA state change UA handling	2015-08-26 07:19:57 -07:00
scsi_lib_dma.c	…
scsi_logging.c	…
scsi_logging.h	…
scsi_module.c	…
scsi_netlink.c	…
scsi_pm.c	…
scsi_priv.h	…
scsi_proc.c	…
scsi_sas_internal.h	…
scsi_scan.c	Move code that is used both by initiator and target drivers	2015-06-01 07:32:43 -07:00
scsi_sysctl.c	…
scsi_sysfs.c	scsi: fix host max depth checking for the 'queue_depth' sysfs interface	2015-07-16 16:09:53 +03:00
scsi_trace.c	…
scsi_transport_api.h	…
scsi_transport_fc.c	…
scsi_transport_iscsi.c	iSCSI: let session recovery_tmo sysfs writes persist across recovery	2015-07-30 12:43:00 -07:00
scsi_transport_sas.c	…
scsi_transport_spi.c	…
scsi_transport_srp.c	…
scsi_typedefs.h	…
scsicam.c	…
sd.c	…
sd.h	…
sd_dif.c	…
ses.c	…
sg.c	…
sgiwd93.c	…
sim710.c	…
sni_53c710.c	…
sr.c	…
sr.h	…
sr_ioctl.c	…
sr_vendor.c	…
st.c	st: Destroy st_index_idr on module exit	2015-08-26 07:45:25 -07:00
st.h	st: implement tape statistics	2015-06-02 08:03:25 -07:00
st_options.h	…
stex.c	…
storvsc_drv.c	storvsc: use shost_for_each_device() instead of open coding	2015-08-12 16:03:13 -07:00
sun3_scsi.c	…
sun3_scsi.h	…
sun3_scsi_vme.c	…
sun3x_esp.c	…
sun_esp.c	…
sym53c416.c	scsi: Do not set cmd_per_lun to 1 in the host template	2015-05-31 18:06:28 -07:00
sym53c416.h	…
t128.c	…
t128.h	…
u14-34f.c	…
ultrastor.c	…
ultrastor.h	…
virtio_scsi.c	…
vmw_pvscsi.c	…
vmw_pvscsi.h	…
wd33c93.c	…
wd33c93.h	…
wd719x.c	scsi: Do not set cmd_per_lun to 1 in the host template	2015-05-31 18:06:28 -07:00
wd719x.h	scsi: Do not set cmd_per_lun to 1 in the host template	2015-05-31 18:06:28 -07:00
wd7000.c	…
xen-scsifront.c	…
zalon.c	…
zorro7xx.c	…