629 lines
17 KiB
C
629 lines
17 KiB
C
/*
|
|
* Support for OR51132 (pcHDTV HD-3000) - VSB/QAM
|
|
*
|
|
* Copyright (C) 2005 Kirk Lapray <kirk_lapray@bigfoot.com>
|
|
*
|
|
* Based on code from Jack Kelliher (kelliher@xmission.com)
|
|
* Copyright (C) 2002 & pcHDTV, inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*
|
|
*/
|
|
|
|
/*
|
|
* This driver needs two external firmware files. Please copy
|
|
* "dvb-fe-or51132-vsb.fw" and "dvb-fe-or51132-qam.fw" to
|
|
* /usr/lib/hotplug/firmware/ or /lib/firmware/
|
|
* (depending on configuration of firmware hotplug).
|
|
*/
|
|
#define OR51132_VSB_FIRMWARE "dvb-fe-or51132-vsb.fw"
|
|
#define OR51132_QAM_FIRMWARE "dvb-fe-or51132-qam.fw"
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/moduleparam.h>
|
|
#include <linux/init.h>
|
|
#include <linux/delay.h>
|
|
#include <asm/byteorder.h>
|
|
|
|
#include "dvb_frontend.h"
|
|
#include "dvb-pll.h"
|
|
#include "or51132.h"
|
|
|
|
static int debug;
|
|
#define dprintk(args...) \
|
|
do { \
|
|
if (debug) printk(KERN_DEBUG "or51132: " args); \
|
|
} while (0)
|
|
|
|
|
|
struct or51132_state
|
|
{
|
|
struct i2c_adapter* i2c;
|
|
struct dvb_frontend_ops ops;
|
|
|
|
/* Configuration settings */
|
|
const struct or51132_config* config;
|
|
|
|
struct dvb_frontend frontend;
|
|
|
|
/* Demodulator private data */
|
|
fe_modulation_t current_modulation;
|
|
|
|
/* Tuner private data */
|
|
u32 current_frequency;
|
|
};
|
|
|
|
static int i2c_writebytes (struct or51132_state* state, u8 reg, u8 *buf, int len)
|
|
{
|
|
int err;
|
|
struct i2c_msg msg;
|
|
msg.addr = reg;
|
|
msg.flags = 0;
|
|
msg.len = len;
|
|
msg.buf = buf;
|
|
|
|
if ((err = i2c_transfer(state->i2c, &msg, 1)) != 1) {
|
|
printk(KERN_WARNING "or51132: i2c_writebytes error (addr %02x, err == %i)\n", reg, err);
|
|
return -EREMOTEIO;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static u8 i2c_readbytes (struct or51132_state* state, u8 reg, u8* buf, int len)
|
|
{
|
|
int err;
|
|
struct i2c_msg msg;
|
|
msg.addr = reg;
|
|
msg.flags = I2C_M_RD;
|
|
msg.len = len;
|
|
msg.buf = buf;
|
|
|
|
if ((err = i2c_transfer(state->i2c, &msg, 1)) != 1) {
|
|
printk(KERN_WARNING "or51132: i2c_readbytes error (addr %02x, err == %i)\n", reg, err);
|
|
return -EREMOTEIO;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int or51132_load_firmware (struct dvb_frontend* fe, const struct firmware *fw)
|
|
{
|
|
struct or51132_state* state = fe->demodulator_priv;
|
|
static u8 run_buf[] = {0x7F,0x01};
|
|
static u8 get_ver_buf[] = {0x04,0x00,0x30,0x00,0x00};
|
|
u8 rec_buf[14];
|
|
u8 cmd_buf[14];
|
|
u32 firmwareAsize, firmwareBsize;
|
|
int i,ret;
|
|
|
|
dprintk("Firmware is %Zd bytes\n",fw->size);
|
|
|
|
/* Get size of firmware A and B */
|
|
firmwareAsize = le32_to_cpu(*((u32*)fw->data));
|
|
dprintk("FirmwareA is %i bytes\n",firmwareAsize);
|
|
firmwareBsize = le32_to_cpu(*((u32*)(fw->data+4)));
|
|
dprintk("FirmwareB is %i bytes\n",firmwareBsize);
|
|
|
|
/* Upload firmware */
|
|
if ((ret = i2c_writebytes(state,state->config->demod_address,
|
|
&fw->data[8],firmwareAsize))) {
|
|
printk(KERN_WARNING "or51132: load_firmware error 1\n");
|
|
return ret;
|
|
}
|
|
msleep(1); /* 1ms */
|
|
if ((ret = i2c_writebytes(state,state->config->demod_address,
|
|
&fw->data[8+firmwareAsize],firmwareBsize))) {
|
|
printk(KERN_WARNING "or51132: load_firmware error 2\n");
|
|
return ret;
|
|
}
|
|
msleep(1); /* 1ms */
|
|
|
|
if ((ret = i2c_writebytes(state,state->config->demod_address,
|
|
run_buf,2))) {
|
|
printk(KERN_WARNING "or51132: load_firmware error 3\n");
|
|
return ret;
|
|
}
|
|
|
|
/* Wait at least 5 msec */
|
|
msleep(20); /* 10ms */
|
|
|
|
if ((ret = i2c_writebytes(state,state->config->demod_address,
|
|
run_buf,2))) {
|
|
printk(KERN_WARNING "or51132: load_firmware error 4\n");
|
|
return ret;
|
|
}
|
|
|
|
/* 50ms for operation to begin */
|
|
msleep(50);
|
|
|
|
/* Read back ucode version to besure we loaded correctly and are really up and running */
|
|
/* Get uCode version */
|
|
cmd_buf[0] = 0x10;
|
|
cmd_buf[1] = 0x10;
|
|
cmd_buf[2] = 0x00;
|
|
cmd_buf[3] = 0x00;
|
|
msleep(20); /* 20ms */
|
|
if ((ret = i2c_writebytes(state,state->config->demod_address,
|
|
cmd_buf,3))) {
|
|
printk(KERN_WARNING "or51132: load_firmware error a\n");
|
|
return ret;
|
|
}
|
|
|
|
cmd_buf[0] = 0x04;
|
|
cmd_buf[1] = 0x17;
|
|
cmd_buf[2] = 0x00;
|
|
cmd_buf[3] = 0x00;
|
|
msleep(20); /* 20ms */
|
|
if ((ret = i2c_writebytes(state,state->config->demod_address,
|
|
cmd_buf,2))) {
|
|
printk(KERN_WARNING "or51132: load_firmware error b\n");
|
|
return ret;
|
|
}
|
|
|
|
cmd_buf[0] = 0x00;
|
|
cmd_buf[1] = 0x00;
|
|
cmd_buf[2] = 0x00;
|
|
cmd_buf[3] = 0x00;
|
|
msleep(20); /* 20ms */
|
|
if ((ret = i2c_writebytes(state,state->config->demod_address,
|
|
cmd_buf,2))) {
|
|
printk(KERN_WARNING "or51132: load_firmware error c\n");
|
|
return ret;
|
|
}
|
|
|
|
for(i=0;i<4;i++) {
|
|
msleep(20); /* 20ms */
|
|
get_ver_buf[4] = i+1;
|
|
if ((ret = i2c_readbytes(state,state->config->demod_address,
|
|
&rec_buf[i*2],2))) {
|
|
printk(KERN_WARNING
|
|
"or51132: load_firmware error d - %d\n",i);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
printk(KERN_WARNING
|
|
"or51132: Version: %02X%02X%02X%02X-%02X%02X%02X%02X (%02X%01X-%01X-%02X%01X-%01X)\n",
|
|
rec_buf[1],rec_buf[0],rec_buf[3],rec_buf[2],
|
|
rec_buf[5],rec_buf[4],rec_buf[7],rec_buf[6],
|
|
rec_buf[3],rec_buf[2]>>4,rec_buf[2]&0x0f,
|
|
rec_buf[5],rec_buf[4]>>4,rec_buf[4]&0x0f);
|
|
|
|
cmd_buf[0] = 0x10;
|
|
cmd_buf[1] = 0x00;
|
|
cmd_buf[2] = 0x00;
|
|
cmd_buf[3] = 0x00;
|
|
msleep(20); /* 20ms */
|
|
if ((ret = i2c_writebytes(state,state->config->demod_address,
|
|
cmd_buf,3))) {
|
|
printk(KERN_WARNING "or51132: load_firmware error e\n");
|
|
return ret;
|
|
}
|
|
return 0;
|
|
};
|
|
|
|
static int or51132_init(struct dvb_frontend* fe)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static int or51132_read_ber(struct dvb_frontend* fe, u32* ber)
|
|
{
|
|
*ber = 0;
|
|
return 0;
|
|
}
|
|
|
|
static int or51132_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
|
|
{
|
|
*ucblocks = 0;
|
|
return 0;
|
|
}
|
|
|
|
static int or51132_sleep(struct dvb_frontend* fe)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static int or51132_setmode(struct dvb_frontend* fe)
|
|
{
|
|
struct or51132_state* state = fe->demodulator_priv;
|
|
unsigned char cmd_buf[4];
|
|
|
|
dprintk("setmode %d\n",(int)state->current_modulation);
|
|
/* set operation mode in Receiver 1 register; */
|
|
cmd_buf[0] = 0x04;
|
|
cmd_buf[1] = 0x01;
|
|
switch (state->current_modulation) {
|
|
case QAM_256:
|
|
case QAM_64:
|
|
case QAM_AUTO:
|
|
/* Auto-deinterleave; MPEG ser, MPEG2tr, phase noise-high*/
|
|
cmd_buf[2] = 0x5F;
|
|
break;
|
|
case VSB_8:
|
|
/* Auto CH, Auto NTSC rej, MPEGser, MPEG2tr, phase noise-high*/
|
|
cmd_buf[2] = 0x50;
|
|
break;
|
|
default:
|
|
printk("setmode:Modulation set to unsupported value\n");
|
|
};
|
|
cmd_buf[3] = 0x00;
|
|
if (i2c_writebytes(state,state->config->demod_address,
|
|
cmd_buf,3)) {
|
|
printk(KERN_WARNING "or51132: set_mode error 1\n");
|
|
return -1;
|
|
}
|
|
dprintk("or51132: set #1 to %02x\n", cmd_buf[2]);
|
|
|
|
/* Set operation mode in Receiver 6 register */
|
|
cmd_buf[0] = 0x1C;
|
|
switch (state->current_modulation) {
|
|
case QAM_AUTO:
|
|
/* REC MODE Normal Carrier Lock */
|
|
cmd_buf[1] = 0x00;
|
|
/* Channel MODE Auto QAM64/256 */
|
|
cmd_buf[2] = 0x4f;
|
|
break;
|
|
case QAM_256:
|
|
/* REC MODE Normal Carrier Lock */
|
|
cmd_buf[1] = 0x00;
|
|
/* Channel MODE QAM256 */
|
|
cmd_buf[2] = 0x45;
|
|
break;
|
|
case QAM_64:
|
|
/* REC MODE Normal Carrier Lock */
|
|
cmd_buf[1] = 0x00;
|
|
/* Channel MODE QAM64 */
|
|
cmd_buf[2] = 0x43;
|
|
break;
|
|
case VSB_8:
|
|
/* REC MODE inv IF spectrum, Normal */
|
|
cmd_buf[1] = 0x03;
|
|
/* Channel MODE ATSC/VSB8 */
|
|
cmd_buf[2] = 0x06;
|
|
break;
|
|
default:
|
|
printk("setmode: Modulation set to unsupported value\n");
|
|
};
|
|
cmd_buf[3] = 0x00;
|
|
msleep(20); /* 20ms */
|
|
if (i2c_writebytes(state,state->config->demod_address,
|
|
cmd_buf,3)) {
|
|
printk(KERN_WARNING "or51132: set_mode error 2\n");
|
|
return -1;
|
|
}
|
|
dprintk("or51132: set #6 to 0x%02x%02x\n", cmd_buf[1], cmd_buf[2]);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int or51132_set_parameters(struct dvb_frontend* fe,
|
|
struct dvb_frontend_parameters *param)
|
|
{
|
|
int ret;
|
|
u8 buf[4];
|
|
struct or51132_state* state = fe->demodulator_priv;
|
|
const struct firmware *fw;
|
|
|
|
/* Change only if we are actually changing the modulation */
|
|
if (state->current_modulation != param->u.vsb.modulation) {
|
|
switch(param->u.vsb.modulation) {
|
|
case VSB_8:
|
|
dprintk("set_parameters VSB MODE\n");
|
|
printk("or51132: Waiting for firmware upload(%s)...\n",
|
|
OR51132_VSB_FIRMWARE);
|
|
ret = request_firmware(&fw, OR51132_VSB_FIRMWARE,
|
|
&state->i2c->dev);
|
|
if (ret){
|
|
printk(KERN_WARNING "or51132: No firmware up"
|
|
"loaded(timeout or file not found?)\n");
|
|
return ret;
|
|
}
|
|
/* Set non-punctured clock for VSB */
|
|
state->config->set_ts_params(fe, 0);
|
|
break;
|
|
case QAM_AUTO:
|
|
case QAM_64:
|
|
case QAM_256:
|
|
dprintk("set_parameters QAM MODE\n");
|
|
printk("or51132: Waiting for firmware upload(%s)...\n",
|
|
OR51132_QAM_FIRMWARE);
|
|
ret = request_firmware(&fw, OR51132_QAM_FIRMWARE,
|
|
&state->i2c->dev);
|
|
if (ret){
|
|
printk(KERN_WARNING "or51132: No firmware up"
|
|
"loaded(timeout or file not found?)\n");
|
|
return ret;
|
|
}
|
|
/* Set punctured clock for QAM */
|
|
state->config->set_ts_params(fe, 1);
|
|
break;
|
|
default:
|
|
printk("or51132:Modulation type(%d) UNSUPPORTED\n",
|
|
param->u.vsb.modulation);
|
|
return -1;
|
|
};
|
|
ret = or51132_load_firmware(fe, fw);
|
|
release_firmware(fw);
|
|
if (ret) {
|
|
printk(KERN_WARNING "or51132: Writing firmware to "
|
|
"device failed!\n");
|
|
return ret;
|
|
}
|
|
printk("or51132: Firmware upload complete.\n");
|
|
|
|
state->current_modulation = param->u.vsb.modulation;
|
|
or51132_setmode(fe);
|
|
}
|
|
|
|
/* Change only if we are actually changing the channel */
|
|
if (state->current_frequency != param->frequency) {
|
|
dvb_pll_configure(state->config->pll_desc, buf,
|
|
param->frequency, 0);
|
|
dprintk("set_parameters tuner bytes: 0x%02x 0x%02x "
|
|
"0x%02x 0x%02x\n",buf[0],buf[1],buf[2],buf[3]);
|
|
if (i2c_writebytes(state, state->config->pll_address ,buf, 4))
|
|
printk(KERN_WARNING "or51132: set_parameters error "
|
|
"writing to tuner\n");
|
|
|
|
/* Set to current mode */
|
|
or51132_setmode(fe);
|
|
|
|
/* Update current frequency */
|
|
state->current_frequency = param->frequency;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int or51132_read_status(struct dvb_frontend* fe, fe_status_t* status)
|
|
{
|
|
struct or51132_state* state = fe->demodulator_priv;
|
|
unsigned char rec_buf[2];
|
|
unsigned char snd_buf[2];
|
|
*status = 0;
|
|
|
|
/* Receiver Status */
|
|
snd_buf[0]=0x04;
|
|
snd_buf[1]=0x00;
|
|
msleep(30); /* 30ms */
|
|
if (i2c_writebytes(state,state->config->demod_address,snd_buf,2)) {
|
|
printk(KERN_WARNING "or51132: read_status write error\n");
|
|
return -1;
|
|
}
|
|
msleep(30); /* 30ms */
|
|
if (i2c_readbytes(state,state->config->demod_address,rec_buf,2)) {
|
|
printk(KERN_WARNING "or51132: read_status read error\n");
|
|
return -1;
|
|
}
|
|
dprintk("read_status %x %x\n",rec_buf[0],rec_buf[1]);
|
|
|
|
if (rec_buf[1] & 0x01) { /* Receiver Lock */
|
|
*status |= FE_HAS_SIGNAL;
|
|
*status |= FE_HAS_CARRIER;
|
|
*status |= FE_HAS_VITERBI;
|
|
*status |= FE_HAS_SYNC;
|
|
*status |= FE_HAS_LOCK;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/* log10-1 table at .5 increments from 1 to 100.5 */
|
|
static unsigned int i100x20log10[] = {
|
|
0, 352, 602, 795, 954, 1088, 1204, 1306, 1397, 1480,
|
|
1556, 1625, 1690, 1750, 1806, 1858, 1908, 1955, 2000, 2042,
|
|
2082, 2121, 2158, 2193, 2227, 2260, 2292, 2322, 2352, 2380,
|
|
2408, 2434, 2460, 2486, 2510, 2534, 2557, 2580, 2602, 2623,
|
|
2644, 2664, 2684, 2704, 2723, 2742, 2760, 2778, 2795, 2813,
|
|
2829, 2846, 2862, 2878, 2894, 2909, 2924, 2939, 2954, 2968,
|
|
2982, 2996, 3010, 3023, 3037, 3050, 3062, 3075, 3088, 3100,
|
|
3112, 3124, 3136, 3148, 3159, 3170, 3182, 3193, 3204, 3214,
|
|
3225, 3236, 3246, 3256, 3266, 3276, 3286, 3296, 3306, 3316,
|
|
3325, 3334, 3344, 3353, 3362, 3371, 3380, 3389, 3397, 3406,
|
|
3415, 3423, 3432, 3440, 3448, 3456, 3464, 3472, 3480, 3488,
|
|
3496, 3504, 3511, 3519, 3526, 3534, 3541, 3549, 3556, 3563,
|
|
3570, 3577, 3584, 3591, 3598, 3605, 3612, 3619, 3625, 3632,
|
|
3639, 3645, 3652, 3658, 3665, 3671, 3677, 3683, 3690, 3696,
|
|
3702, 3708, 3714, 3720, 3726, 3732, 3738, 3744, 3750, 3755,
|
|
3761, 3767, 3772, 3778, 3784, 3789, 3795, 3800, 3806, 3811,
|
|
3816, 3822, 3827, 3832, 3838, 3843, 3848, 3853, 3858, 3863,
|
|
3868, 3874, 3879, 3884, 3888, 3893, 3898, 3903, 3908, 3913,
|
|
3918, 3922, 3927, 3932, 3936, 3941, 3946, 3950, 3955, 3960,
|
|
3964, 3969, 3973, 3978, 3982, 3986, 3991, 3995, 4000, 4004,
|
|
};
|
|
|
|
static unsigned int denom[] = {1,1,100,1000,10000,100000,1000000,10000000,100000000};
|
|
|
|
static unsigned int i20Log10(unsigned short val)
|
|
{
|
|
unsigned int rntval = 100;
|
|
unsigned int tmp = val;
|
|
unsigned int exp = 1;
|
|
|
|
while(tmp > 100) {tmp /= 100; exp++;}
|
|
|
|
val = (2 * val)/denom[exp];
|
|
if (exp > 1) rntval = 2000*exp;
|
|
|
|
rntval += i100x20log10[val];
|
|
return rntval;
|
|
}
|
|
|
|
static int or51132_read_signal_strength(struct dvb_frontend* fe, u16* strength)
|
|
{
|
|
struct or51132_state* state = fe->demodulator_priv;
|
|
unsigned char rec_buf[2];
|
|
unsigned char snd_buf[2];
|
|
u8 rcvr_stat;
|
|
u16 snr_equ;
|
|
int usK;
|
|
|
|
snd_buf[0]=0x04;
|
|
snd_buf[1]=0x02; /* SNR after Equalizer */
|
|
msleep(30); /* 30ms */
|
|
if (i2c_writebytes(state,state->config->demod_address,snd_buf,2)) {
|
|
printk(KERN_WARNING "or51132: read_status write error\n");
|
|
return -1;
|
|
}
|
|
msleep(30); /* 30ms */
|
|
if (i2c_readbytes(state,state->config->demod_address,rec_buf,2)) {
|
|
printk(KERN_WARNING "or51132: read_status read error\n");
|
|
return -1;
|
|
}
|
|
snr_equ = rec_buf[0] | (rec_buf[1] << 8);
|
|
dprintk("read_signal_strength snr_equ %x %x (%i)\n",rec_buf[0],rec_buf[1],snr_equ);
|
|
|
|
/* Receiver Status */
|
|
snd_buf[0]=0x04;
|
|
snd_buf[1]=0x00;
|
|
msleep(30); /* 30ms */
|
|
if (i2c_writebytes(state,state->config->demod_address,snd_buf,2)) {
|
|
printk(KERN_WARNING "or51132: read_signal_strength read_status write error\n");
|
|
return -1;
|
|
}
|
|
msleep(30); /* 30ms */
|
|
if (i2c_readbytes(state,state->config->demod_address,rec_buf,2)) {
|
|
printk(KERN_WARNING "or51132: read_signal_strength read_status read error\n");
|
|
return -1;
|
|
}
|
|
dprintk("read_signal_strength read_status %x %x\n",rec_buf[0],rec_buf[1]);
|
|
rcvr_stat = rec_buf[1];
|
|
usK = (rcvr_stat & 0x10) ? 3 : 0;
|
|
|
|
/* The value reported back from the frontend will be FFFF=100% 0000=0% */
|
|
*strength = (((8952 - i20Log10(snr_equ) - usK*100)/3+5)*65535)/1000;
|
|
dprintk("read_signal_strength %i\n",*strength);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int or51132_read_snr(struct dvb_frontend* fe, u16* snr)
|
|
{
|
|
struct or51132_state* state = fe->demodulator_priv;
|
|
unsigned char rec_buf[2];
|
|
unsigned char snd_buf[2];
|
|
u16 snr_equ;
|
|
|
|
snd_buf[0]=0x04;
|
|
snd_buf[1]=0x02; /* SNR after Equalizer */
|
|
msleep(30); /* 30ms */
|
|
if (i2c_writebytes(state,state->config->demod_address,snd_buf,2)) {
|
|
printk(KERN_WARNING "or51132: read_snr write error\n");
|
|
return -1;
|
|
}
|
|
msleep(30); /* 30ms */
|
|
if (i2c_readbytes(state,state->config->demod_address,rec_buf,2)) {
|
|
printk(KERN_WARNING "or51132: read_snr dvr read error\n");
|
|
return -1;
|
|
}
|
|
snr_equ = rec_buf[0] | (rec_buf[1] << 8);
|
|
dprintk("read_snr snr_equ %x %x (%i)\n",rec_buf[0],rec_buf[1],snr_equ);
|
|
|
|
*snr = 0xFFFF - snr_equ;
|
|
dprintk("read_snr %i\n",*snr);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int or51132_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings* fe_tune_settings)
|
|
{
|
|
fe_tune_settings->min_delay_ms = 500;
|
|
fe_tune_settings->step_size = 0;
|
|
fe_tune_settings->max_drift = 0;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void or51132_release(struct dvb_frontend* fe)
|
|
{
|
|
struct or51132_state* state = fe->demodulator_priv;
|
|
kfree(state);
|
|
}
|
|
|
|
static struct dvb_frontend_ops or51132_ops;
|
|
|
|
struct dvb_frontend* or51132_attach(const struct or51132_config* config,
|
|
struct i2c_adapter* i2c)
|
|
{
|
|
struct or51132_state* state = NULL;
|
|
|
|
/* Allocate memory for the internal state */
|
|
state = kmalloc(sizeof(struct or51132_state), GFP_KERNEL);
|
|
if (state == NULL)
|
|
goto error;
|
|
|
|
/* Setup the state */
|
|
state->config = config;
|
|
state->i2c = i2c;
|
|
memcpy(&state->ops, &or51132_ops, sizeof(struct dvb_frontend_ops));
|
|
state->current_frequency = -1;
|
|
state->current_modulation = -1;
|
|
|
|
/* Create dvb_frontend */
|
|
state->frontend.ops = &state->ops;
|
|
state->frontend.demodulator_priv = state;
|
|
return &state->frontend;
|
|
|
|
error:
|
|
if (state)
|
|
kfree(state);
|
|
return NULL;
|
|
}
|
|
|
|
static struct dvb_frontend_ops or51132_ops = {
|
|
|
|
.info = {
|
|
.name = "Oren OR51132 VSB/QAM Frontend",
|
|
.type = FE_ATSC,
|
|
.frequency_min = 44000000,
|
|
.frequency_max = 958000000,
|
|
.frequency_stepsize = 166666,
|
|
.caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
|
|
FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
|
|
FE_CAN_QAM_64 | FE_CAN_QAM_256 | FE_CAN_QAM_AUTO |
|
|
FE_CAN_8VSB
|
|
},
|
|
|
|
.release = or51132_release,
|
|
|
|
.init = or51132_init,
|
|
.sleep = or51132_sleep,
|
|
|
|
.set_frontend = or51132_set_parameters,
|
|
.get_tune_settings = or51132_get_tune_settings,
|
|
|
|
.read_status = or51132_read_status,
|
|
.read_ber = or51132_read_ber,
|
|
.read_signal_strength = or51132_read_signal_strength,
|
|
.read_snr = or51132_read_snr,
|
|
.read_ucblocks = or51132_read_ucblocks,
|
|
};
|
|
|
|
module_param(debug, int, 0644);
|
|
MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
|
|
|
|
MODULE_DESCRIPTION("OR51132 ATSC [pcHDTV HD-3000] (8VSB & ITU J83 AnnexB FEC QAM64/256) Demodulator Driver");
|
|
MODULE_AUTHOR("Kirk Lapray");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
EXPORT_SYMBOL(or51132_attach);
|
|
|
|
/*
|
|
* Local variables:
|
|
* c-basic-offset: 8
|
|
* End:
|
|
*/
|