441 lines
15 KiB
C
441 lines
15 KiB
C
/*
|
|
* linux/drivers/mmc/host/mmci.h - ARM PrimeCell MMCI PL180/1 driver
|
|
*
|
|
* Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
#define MMCIPOWER 0x000
|
|
#define MCI_PWR_OFF 0x00
|
|
#define MCI_PWR_UP 0x02
|
|
#define MCI_PWR_ON 0x03
|
|
#define MCI_OD (1 << 6)
|
|
#define MCI_ROD (1 << 7)
|
|
/*
|
|
* The ST Micro version does not have ROD and reuse the voltage registers for
|
|
* direction settings.
|
|
*/
|
|
#define MCI_ST_DATA2DIREN (1 << 2)
|
|
#define MCI_ST_CMDDIREN (1 << 3)
|
|
#define MCI_ST_DATA0DIREN (1 << 4)
|
|
#define MCI_ST_DATA31DIREN (1 << 5)
|
|
#define MCI_ST_FBCLKEN (1 << 7)
|
|
#define MCI_ST_DATA74DIREN (1 << 8)
|
|
/*
|
|
* The STM32 sdmmc does not have PWR_UP/OD/ROD
|
|
* and uses the power register for
|
|
*/
|
|
#define MCI_STM32_PWR_CYC 0x02
|
|
#define MCI_STM32_VSWITCH BIT(2)
|
|
#define MCI_STM32_VSWITCHEN BIT(3)
|
|
#define MCI_STM32_DIRPOL BIT(4)
|
|
|
|
#define MMCICLOCK 0x004
|
|
#define MCI_CLK_ENABLE (1 << 8)
|
|
#define MCI_CLK_PWRSAVE (1 << 9)
|
|
#define MCI_CLK_BYPASS (1 << 10)
|
|
#define MCI_4BIT_BUS (1 << 11)
|
|
/*
|
|
* 8bit wide buses, hardware flow contronl, negative edges and clock inversion
|
|
* supported in ST Micro U300 and Ux500 versions
|
|
*/
|
|
#define MCI_ST_8BIT_BUS (1 << 12)
|
|
#define MCI_ST_U300_HWFCEN (1 << 13)
|
|
#define MCI_ST_UX500_NEG_EDGE (1 << 13)
|
|
#define MCI_ST_UX500_HWFCEN (1 << 14)
|
|
#define MCI_ST_UX500_CLK_INV (1 << 15)
|
|
/* Modified PL180 on Versatile Express platform */
|
|
#define MCI_ARM_HWFCEN (1 << 12)
|
|
|
|
/* Modified on Qualcomm Integrations */
|
|
#define MCI_QCOM_CLK_WIDEBUS_8 (BIT(10) | BIT(11))
|
|
#define MCI_QCOM_CLK_FLOWENA BIT(12)
|
|
#define MCI_QCOM_CLK_INVERTOUT BIT(13)
|
|
|
|
/* select in latch data and command in */
|
|
#define MCI_QCOM_CLK_SELECT_IN_FBCLK BIT(15)
|
|
#define MCI_QCOM_CLK_SELECT_IN_DDR_MODE (BIT(14) | BIT(15))
|
|
|
|
/* Modified on STM32 sdmmc */
|
|
#define MCI_STM32_CLK_CLKDIV_MSK GENMASK(9, 0)
|
|
#define MCI_STM32_CLK_WIDEBUS_4 BIT(14)
|
|
#define MCI_STM32_CLK_WIDEBUS_8 BIT(15)
|
|
#define MCI_STM32_CLK_NEGEDGE BIT(16)
|
|
#define MCI_STM32_CLK_HWFCEN BIT(17)
|
|
#define MCI_STM32_CLK_DDR BIT(18)
|
|
#define MCI_STM32_CLK_BUSSPEED BIT(19)
|
|
#define MCI_STM32_CLK_SEL_MSK GENMASK(21, 20)
|
|
#define MCI_STM32_CLK_SELCK (0 << 20)
|
|
#define MCI_STM32_CLK_SELCKIN (1 << 20)
|
|
#define MCI_STM32_CLK_SELFBCK (2 << 20)
|
|
|
|
#define MMCIARGUMENT 0x008
|
|
|
|
/* The command register controls the Command Path State Machine (CPSM) */
|
|
#define MMCICOMMAND 0x00c
|
|
#define MCI_CPSM_RESPONSE BIT(6)
|
|
#define MCI_CPSM_LONGRSP BIT(7)
|
|
#define MCI_CPSM_INTERRUPT BIT(8)
|
|
#define MCI_CPSM_PENDING BIT(9)
|
|
#define MCI_CPSM_ENABLE BIT(10)
|
|
/* Command register flag extenstions in the ST Micro versions */
|
|
#define MCI_CPSM_ST_SDIO_SUSP BIT(11)
|
|
#define MCI_CPSM_ST_ENCMD_COMPL BIT(12)
|
|
#define MCI_CPSM_ST_NIEN BIT(13)
|
|
#define MCI_CPSM_ST_CE_ATACMD BIT(14)
|
|
/* Command register flag extensions in the Qualcomm versions */
|
|
#define MCI_CPSM_QCOM_PROGENA BIT(11)
|
|
#define MCI_CPSM_QCOM_DATCMD BIT(12)
|
|
#define MCI_CPSM_QCOM_MCIABORT BIT(13)
|
|
#define MCI_CPSM_QCOM_CCSENABLE BIT(14)
|
|
#define MCI_CPSM_QCOM_CCSDISABLE BIT(15)
|
|
#define MCI_CPSM_QCOM_AUTO_CMD19 BIT(16)
|
|
#define MCI_CPSM_QCOM_AUTO_CMD21 BIT(21)
|
|
/* Command register in STM32 sdmmc versions */
|
|
#define MCI_CPSM_STM32_CMDTRANS BIT(6)
|
|
#define MCI_CPSM_STM32_CMDSTOP BIT(7)
|
|
#define MCI_CPSM_STM32_WAITRESP_MASK GENMASK(9, 8)
|
|
#define MCI_CPSM_STM32_NORSP (0 << 8)
|
|
#define MCI_CPSM_STM32_SRSP_CRC (1 << 8)
|
|
#define MCI_CPSM_STM32_SRSP (2 << 8)
|
|
#define MCI_CPSM_STM32_LRSP_CRC (3 << 8)
|
|
#define MCI_CPSM_STM32_ENABLE BIT(12)
|
|
|
|
#define MMCIRESPCMD 0x010
|
|
#define MMCIRESPONSE0 0x014
|
|
#define MMCIRESPONSE1 0x018
|
|
#define MMCIRESPONSE2 0x01c
|
|
#define MMCIRESPONSE3 0x020
|
|
#define MMCIDATATIMER 0x024
|
|
#define MMCIDATALENGTH 0x028
|
|
|
|
/* The data control register controls the Data Path State Machine (DPSM) */
|
|
#define MMCIDATACTRL 0x02c
|
|
#define MCI_DPSM_ENABLE BIT(0)
|
|
#define MCI_DPSM_DIRECTION BIT(1)
|
|
#define MCI_DPSM_MODE BIT(2)
|
|
#define MCI_DPSM_DMAENABLE BIT(3)
|
|
#define MCI_DPSM_BLOCKSIZE BIT(4)
|
|
/* Control register extensions in the ST Micro U300 and Ux500 versions */
|
|
#define MCI_DPSM_ST_RWSTART BIT(8)
|
|
#define MCI_DPSM_ST_RWSTOP BIT(9)
|
|
#define MCI_DPSM_ST_RWMOD BIT(10)
|
|
#define MCI_DPSM_ST_SDIOEN BIT(11)
|
|
/* Control register extensions in the ST Micro Ux500 versions */
|
|
#define MCI_DPSM_ST_DMAREQCTL BIT(12)
|
|
#define MCI_DPSM_ST_DBOOTMODEEN BIT(13)
|
|
#define MCI_DPSM_ST_BUSYMODE BIT(14)
|
|
#define MCI_DPSM_ST_DDRMODE BIT(15)
|
|
/* Control register extensions in the Qualcomm versions */
|
|
#define MCI_DPSM_QCOM_DATA_PEND BIT(17)
|
|
#define MCI_DPSM_QCOM_RX_DATA_PEND BIT(20)
|
|
|
|
#define MMCIDATACNT 0x030
|
|
#define MMCISTATUS 0x034
|
|
#define MCI_CMDCRCFAIL (1 << 0)
|
|
#define MCI_DATACRCFAIL (1 << 1)
|
|
#define MCI_CMDTIMEOUT (1 << 2)
|
|
#define MCI_DATATIMEOUT (1 << 3)
|
|
#define MCI_TXUNDERRUN (1 << 4)
|
|
#define MCI_RXOVERRUN (1 << 5)
|
|
#define MCI_CMDRESPEND (1 << 6)
|
|
#define MCI_CMDSENT (1 << 7)
|
|
#define MCI_DATAEND (1 << 8)
|
|
#define MCI_STARTBITERR (1 << 9)
|
|
#define MCI_DATABLOCKEND (1 << 10)
|
|
#define MCI_CMDACTIVE (1 << 11)
|
|
#define MCI_TXACTIVE (1 << 12)
|
|
#define MCI_RXACTIVE (1 << 13)
|
|
#define MCI_TXFIFOHALFEMPTY (1 << 14)
|
|
#define MCI_RXFIFOHALFFULL (1 << 15)
|
|
#define MCI_TXFIFOFULL (1 << 16)
|
|
#define MCI_RXFIFOFULL (1 << 17)
|
|
#define MCI_TXFIFOEMPTY (1 << 18)
|
|
#define MCI_RXFIFOEMPTY (1 << 19)
|
|
#define MCI_TXDATAAVLBL (1 << 20)
|
|
#define MCI_RXDATAAVLBL (1 << 21)
|
|
/* Extended status bits for the ST Micro variants */
|
|
#define MCI_ST_SDIOIT (1 << 22)
|
|
#define MCI_ST_CEATAEND (1 << 23)
|
|
#define MCI_ST_CARDBUSY (1 << 24)
|
|
/* Extended status bits for the STM32 variants */
|
|
#define MCI_STM32_BUSYD0 BIT(20)
|
|
|
|
#define MMCICLEAR 0x038
|
|
#define MCI_CMDCRCFAILCLR (1 << 0)
|
|
#define MCI_DATACRCFAILCLR (1 << 1)
|
|
#define MCI_CMDTIMEOUTCLR (1 << 2)
|
|
#define MCI_DATATIMEOUTCLR (1 << 3)
|
|
#define MCI_TXUNDERRUNCLR (1 << 4)
|
|
#define MCI_RXOVERRUNCLR (1 << 5)
|
|
#define MCI_CMDRESPENDCLR (1 << 6)
|
|
#define MCI_CMDSENTCLR (1 << 7)
|
|
#define MCI_DATAENDCLR (1 << 8)
|
|
#define MCI_STARTBITERRCLR (1 << 9)
|
|
#define MCI_DATABLOCKENDCLR (1 << 10)
|
|
/* Extended status bits for the ST Micro variants */
|
|
#define MCI_ST_SDIOITC (1 << 22)
|
|
#define MCI_ST_CEATAENDC (1 << 23)
|
|
#define MCI_ST_BUSYENDC (1 << 24)
|
|
|
|
#define MMCIMASK0 0x03c
|
|
#define MCI_CMDCRCFAILMASK (1 << 0)
|
|
#define MCI_DATACRCFAILMASK (1 << 1)
|
|
#define MCI_CMDTIMEOUTMASK (1 << 2)
|
|
#define MCI_DATATIMEOUTMASK (1 << 3)
|
|
#define MCI_TXUNDERRUNMASK (1 << 4)
|
|
#define MCI_RXOVERRUNMASK (1 << 5)
|
|
#define MCI_CMDRESPENDMASK (1 << 6)
|
|
#define MCI_CMDSENTMASK (1 << 7)
|
|
#define MCI_DATAENDMASK (1 << 8)
|
|
#define MCI_STARTBITERRMASK (1 << 9)
|
|
#define MCI_DATABLOCKENDMASK (1 << 10)
|
|
#define MCI_CMDACTIVEMASK (1 << 11)
|
|
#define MCI_TXACTIVEMASK (1 << 12)
|
|
#define MCI_RXACTIVEMASK (1 << 13)
|
|
#define MCI_TXFIFOHALFEMPTYMASK (1 << 14)
|
|
#define MCI_RXFIFOHALFFULLMASK (1 << 15)
|
|
#define MCI_TXFIFOFULLMASK (1 << 16)
|
|
#define MCI_RXFIFOFULLMASK (1 << 17)
|
|
#define MCI_TXFIFOEMPTYMASK (1 << 18)
|
|
#define MCI_RXFIFOEMPTYMASK (1 << 19)
|
|
#define MCI_TXDATAAVLBLMASK (1 << 20)
|
|
#define MCI_RXDATAAVLBLMASK (1 << 21)
|
|
/* Extended status bits for the ST Micro variants */
|
|
#define MCI_ST_SDIOITMASK (1 << 22)
|
|
#define MCI_ST_CEATAENDMASK (1 << 23)
|
|
#define MCI_ST_BUSYENDMASK (1 << 24)
|
|
/* Extended status bits for the STM32 variants */
|
|
#define MCI_STM32_BUSYD0ENDMASK BIT(21)
|
|
|
|
#define MMCIMASK1 0x040
|
|
#define MMCIFIFOCNT 0x048
|
|
#define MMCIFIFO 0x080 /* to 0x0bc */
|
|
|
|
/* STM32 sdmmc registers for IDMA (Internal DMA) */
|
|
#define MMCI_STM32_IDMACTRLR 0x050
|
|
#define MMCI_STM32_IDMAEN BIT(0)
|
|
#define MMCI_STM32_IDMALLIEN BIT(1)
|
|
|
|
#define MMCI_STM32_IDMABSIZER 0x054
|
|
#define MMCI_STM32_IDMABNDT_SHIFT 5
|
|
#define MMCI_STM32_IDMABNDT_MASK GENMASK(12, 5)
|
|
|
|
#define MMCI_STM32_IDMABASE0R 0x058
|
|
|
|
#define MMCI_STM32_IDMALAR 0x64
|
|
#define MMCI_STM32_IDMALA_MASK GENMASK(13, 0)
|
|
#define MMCI_STM32_ABR BIT(29)
|
|
#define MMCI_STM32_ULS BIT(30)
|
|
#define MMCI_STM32_ULA BIT(31)
|
|
|
|
#define MMCI_STM32_IDMABAR 0x68
|
|
|
|
#define MCI_IRQENABLE \
|
|
(MCI_CMDCRCFAILMASK | MCI_DATACRCFAILMASK | MCI_CMDTIMEOUTMASK | \
|
|
MCI_DATATIMEOUTMASK | MCI_TXUNDERRUNMASK | MCI_RXOVERRUNMASK | \
|
|
MCI_CMDRESPENDMASK | MCI_CMDSENTMASK)
|
|
|
|
/* These interrupts are directed to IRQ1 when two IRQ lines are available */
|
|
#define MCI_IRQ_PIO_MASK \
|
|
(MCI_RXFIFOHALFFULLMASK | MCI_RXDATAAVLBLMASK | \
|
|
MCI_TXFIFOHALFEMPTYMASK)
|
|
|
|
#define MCI_IRQ_PIO_STM32_MASK \
|
|
(MCI_RXFIFOHALFFULLMASK | MCI_TXFIFOHALFEMPTYMASK)
|
|
|
|
#define NR_SG 128
|
|
|
|
#define MMCI_PINCTRL_STATE_OPENDRAIN "opendrain"
|
|
|
|
struct clk;
|
|
struct dma_chan;
|
|
struct mmci_host;
|
|
|
|
/**
|
|
* struct variant_data - MMCI variant-specific quirks
|
|
* @clkreg: default value for MCICLOCK register
|
|
* @clkreg_enable: enable value for MMCICLOCK register
|
|
* @clkreg_8bit_bus_enable: enable value for 8 bit bus
|
|
* @clkreg_neg_edge_enable: enable value for inverted data/cmd output
|
|
* @cmdreg_cpsm_enable: enable value for CPSM
|
|
* @cmdreg_lrsp_crc: enable value for long response with crc
|
|
* @cmdreg_srsp_crc: enable value for short response with crc
|
|
* @cmdreg_srsp: enable value for short response without crc
|
|
* @cmdreg_stop: enable value for stop and abort transmission
|
|
* @datalength_bits: number of bits in the MMCIDATALENGTH register
|
|
* @fifosize: number of bytes that can be written when MMCI_TXFIFOEMPTY
|
|
* is asserted (likewise for RX)
|
|
* @fifohalfsize: number of bytes that can be written when MCI_TXFIFOHALFEMPTY
|
|
* is asserted (likewise for RX)
|
|
* @data_cmd_enable: enable value for data commands.
|
|
* @st_sdio: enable ST specific SDIO logic
|
|
* @st_clkdiv: true if using a ST-specific clock divider algorithm
|
|
* @stm32_clkdiv: true if using a STM32-specific clock divider algorithm
|
|
* @datactrl_mask_ddrmode: ddr mode mask in datactrl register.
|
|
* @blksz_datactrl16: true if Block size is at b16..b30 position in datactrl register
|
|
* @blksz_datactrl4: true if Block size is at b4..b16 position in datactrl
|
|
* register
|
|
* @datactrl_mask_sdio: SDIO enable mask in datactrl register
|
|
* @datactrl_blksz: block size in power of two
|
|
* @datactrl_dpsm_enable: enable value for DPSM
|
|
* @datactrl_first: true if data must be setup before send command
|
|
* @datacnt_useless: true if you could not use datacnt register to read
|
|
* remaining data
|
|
* @pwrreg_powerup: power up value for MMCIPOWER register
|
|
* @f_max: maximum clk frequency supported by the controller.
|
|
* @signal_direction: input/out direction of bus signals can be indicated
|
|
* @pwrreg_clkgate: MMCIPOWER register must be used to gate the clock
|
|
* @busy_detect: true if the variant supports busy detection on DAT0.
|
|
* @busy_dpsm_flag: bitmask enabling busy detection in the DPSM
|
|
* @busy_detect_flag: bitmask identifying the bit in the MMCISTATUS register
|
|
* indicating that the card is busy
|
|
* @busy_detect_mask: bitmask identifying the bit in the MMCIMASK0 to mask for
|
|
* getting busy end detection interrupts
|
|
* @pwrreg_nopower: bits in MMCIPOWER don't controls ext. power supply
|
|
* @explicit_mclk_control: enable explicit mclk control in driver.
|
|
* @qcom_fifo: enables qcom specific fifo pio read logic.
|
|
* @qcom_dml: enables qcom specific dma glue for dma transfers.
|
|
* @reversed_irq_handling: handle data irq before cmd irq.
|
|
* @mmcimask1: true if variant have a MMCIMASK1 register.
|
|
* @irq_pio_mask: bitmask used to manage interrupt pio transfert in mmcimask
|
|
* register
|
|
* @start_err: bitmask identifying the STARTBITERR bit inside MMCISTATUS
|
|
* register.
|
|
* @opendrain: bitmask identifying the OPENDRAIN bit inside MMCIPOWER register
|
|
* @dma_lli: true if variant has dma link list feature.
|
|
* @stm32_idmabsize_mask: stm32 sdmmc idma buffer size.
|
|
*/
|
|
struct variant_data {
|
|
unsigned int clkreg;
|
|
unsigned int clkreg_enable;
|
|
unsigned int clkreg_8bit_bus_enable;
|
|
unsigned int clkreg_neg_edge_enable;
|
|
unsigned int cmdreg_cpsm_enable;
|
|
unsigned int cmdreg_lrsp_crc;
|
|
unsigned int cmdreg_srsp_crc;
|
|
unsigned int cmdreg_srsp;
|
|
unsigned int cmdreg_stop;
|
|
unsigned int datalength_bits;
|
|
unsigned int fifosize;
|
|
unsigned int fifohalfsize;
|
|
unsigned int data_cmd_enable;
|
|
unsigned int datactrl_mask_ddrmode;
|
|
unsigned int datactrl_mask_sdio;
|
|
unsigned int datactrl_blocksz;
|
|
unsigned int datactrl_dpsm_enable;
|
|
u8 datactrl_first:1;
|
|
u8 datacnt_useless:1;
|
|
u8 st_sdio:1;
|
|
u8 st_clkdiv:1;
|
|
u8 stm32_clkdiv:1;
|
|
u8 blksz_datactrl16:1;
|
|
u8 blksz_datactrl4:1;
|
|
u32 pwrreg_powerup;
|
|
u32 f_max;
|
|
u8 signal_direction:1;
|
|
u8 pwrreg_clkgate:1;
|
|
u8 busy_detect:1;
|
|
u32 busy_dpsm_flag;
|
|
u32 busy_detect_flag;
|
|
u32 busy_detect_mask;
|
|
u8 pwrreg_nopower:1;
|
|
u8 explicit_mclk_control:1;
|
|
u8 qcom_fifo:1;
|
|
u8 qcom_dml:1;
|
|
u8 reversed_irq_handling:1;
|
|
u8 mmcimask1:1;
|
|
unsigned int irq_pio_mask;
|
|
u32 start_err;
|
|
u32 opendrain;
|
|
u8 dma_lli:1;
|
|
u32 stm32_idmabsize_mask;
|
|
void (*init)(struct mmci_host *host);
|
|
};
|
|
|
|
/* mmci variant callbacks */
|
|
struct mmci_host_ops {
|
|
int (*validate_data)(struct mmci_host *host, struct mmc_data *data);
|
|
int (*prep_data)(struct mmci_host *host, struct mmc_data *data,
|
|
bool next);
|
|
void (*unprep_data)(struct mmci_host *host, struct mmc_data *data,
|
|
int err);
|
|
void (*get_next_data)(struct mmci_host *host, struct mmc_data *data);
|
|
int (*dma_setup)(struct mmci_host *host);
|
|
void (*dma_release)(struct mmci_host *host);
|
|
int (*dma_start)(struct mmci_host *host, unsigned int *datactrl);
|
|
void (*dma_finalize)(struct mmci_host *host, struct mmc_data *data);
|
|
void (*dma_error)(struct mmci_host *host);
|
|
void (*set_clkreg)(struct mmci_host *host, unsigned int desired);
|
|
void (*set_pwrreg)(struct mmci_host *host, unsigned int pwr);
|
|
};
|
|
|
|
struct mmci_host {
|
|
phys_addr_t phybase;
|
|
void __iomem *base;
|
|
struct mmc_request *mrq;
|
|
struct mmc_command *cmd;
|
|
struct mmc_data *data;
|
|
struct mmc_host *mmc;
|
|
struct clk *clk;
|
|
u8 singleirq:1;
|
|
|
|
struct reset_control *rst;
|
|
|
|
spinlock_t lock;
|
|
|
|
unsigned int mclk;
|
|
/* cached value of requested clk in set_ios */
|
|
unsigned int clock_cache;
|
|
unsigned int cclk;
|
|
u32 pwr_reg;
|
|
u32 pwr_reg_add;
|
|
u32 clk_reg;
|
|
u32 clk_reg_add;
|
|
u32 datactrl_reg;
|
|
u32 busy_status;
|
|
u32 mask1_reg;
|
|
u8 vqmmc_enabled:1;
|
|
struct mmci_platform_data *plat;
|
|
struct mmci_host_ops *ops;
|
|
struct variant_data *variant;
|
|
struct pinctrl *pinctrl;
|
|
struct pinctrl_state *pins_default;
|
|
struct pinctrl_state *pins_opendrain;
|
|
|
|
u8 hw_designer;
|
|
u8 hw_revision:4;
|
|
|
|
struct timer_list timer;
|
|
unsigned int oldstat;
|
|
|
|
/* pio stuff */
|
|
struct sg_mapping_iter sg_miter;
|
|
unsigned int size;
|
|
int (*get_rx_fifocnt)(struct mmci_host *h, u32 status, int remain);
|
|
|
|
u8 use_dma:1;
|
|
u8 dma_in_progress:1;
|
|
void *dma_priv;
|
|
|
|
s32 next_cookie;
|
|
};
|
|
|
|
#define dma_inprogress(host) ((host)->dma_in_progress)
|
|
|
|
void mmci_write_clkreg(struct mmci_host *host, u32 clk);
|
|
void mmci_write_pwrreg(struct mmci_host *host, u32 pwr);
|
|
|
|
int mmci_dmae_prep_data(struct mmci_host *host, struct mmc_data *data,
|
|
bool next);
|
|
void mmci_dmae_unprep_data(struct mmci_host *host, struct mmc_data *data,
|
|
int err);
|
|
void mmci_dmae_get_next_data(struct mmci_host *host, struct mmc_data *data);
|
|
int mmci_dmae_setup(struct mmci_host *host);
|
|
void mmci_dmae_release(struct mmci_host *host);
|
|
int mmci_dmae_start(struct mmci_host *host, unsigned int *datactrl);
|
|
void mmci_dmae_finalize(struct mmci_host *host, struct mmc_data *data);
|
|
void mmci_dmae_error(struct mmci_host *host);
|