601 lines
16 KiB
C
601 lines
16 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
// Copyright (C) 2018 Spreadtrum Communications Inc.
|
|
|
|
#include <linux/hwspinlock.h>
|
|
#include <linux/iio/iio.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/module.h>
|
|
#include <linux/nvmem-consumer.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/slab.h>
|
|
|
|
/* PMIC global registers definition */
|
|
#define SC27XX_MODULE_EN 0xc08
|
|
#define SC27XX_MODULE_ADC_EN BIT(5)
|
|
#define SC27XX_ARM_CLK_EN 0xc10
|
|
#define SC27XX_CLK_ADC_EN BIT(5)
|
|
#define SC27XX_CLK_ADC_CLK_EN BIT(6)
|
|
|
|
/* ADC controller registers definition */
|
|
#define SC27XX_ADC_CTL 0x0
|
|
#define SC27XX_ADC_CH_CFG 0x4
|
|
#define SC27XX_ADC_DATA 0x4c
|
|
#define SC27XX_ADC_INT_EN 0x50
|
|
#define SC27XX_ADC_INT_CLR 0x54
|
|
#define SC27XX_ADC_INT_STS 0x58
|
|
#define SC27XX_ADC_INT_RAW 0x5c
|
|
|
|
/* Bits and mask definition for SC27XX_ADC_CTL register */
|
|
#define SC27XX_ADC_EN BIT(0)
|
|
#define SC27XX_ADC_CHN_RUN BIT(1)
|
|
#define SC27XX_ADC_12BIT_MODE BIT(2)
|
|
#define SC27XX_ADC_RUN_NUM_MASK GENMASK(7, 4)
|
|
#define SC27XX_ADC_RUN_NUM_SHIFT 4
|
|
|
|
/* Bits and mask definition for SC27XX_ADC_CH_CFG register */
|
|
#define SC27XX_ADC_CHN_ID_MASK GENMASK(4, 0)
|
|
#define SC27XX_ADC_SCALE_MASK GENMASK(10, 8)
|
|
#define SC27XX_ADC_SCALE_SHIFT 8
|
|
|
|
/* Bits definitions for SC27XX_ADC_INT_EN registers */
|
|
#define SC27XX_ADC_IRQ_EN BIT(0)
|
|
|
|
/* Bits definitions for SC27XX_ADC_INT_CLR registers */
|
|
#define SC27XX_ADC_IRQ_CLR BIT(0)
|
|
|
|
/* Mask definition for SC27XX_ADC_DATA register */
|
|
#define SC27XX_ADC_DATA_MASK GENMASK(11, 0)
|
|
|
|
/* Timeout (ms) for the trylock of hardware spinlocks */
|
|
#define SC27XX_ADC_HWLOCK_TIMEOUT 5000
|
|
|
|
/* Maximum ADC channel number */
|
|
#define SC27XX_ADC_CHANNEL_MAX 32
|
|
|
|
/* ADC voltage ratio definition */
|
|
#define SC27XX_VOLT_RATIO(n, d) \
|
|
(((n) << SC27XX_RATIO_NUMERATOR_OFFSET) | (d))
|
|
#define SC27XX_RATIO_NUMERATOR_OFFSET 16
|
|
#define SC27XX_RATIO_DENOMINATOR_MASK GENMASK(15, 0)
|
|
|
|
struct sc27xx_adc_data {
|
|
struct device *dev;
|
|
struct regmap *regmap;
|
|
/*
|
|
* One hardware spinlock to synchronize between the multiple
|
|
* subsystems which will access the unique ADC controller.
|
|
*/
|
|
struct hwspinlock *hwlock;
|
|
struct completion completion;
|
|
int channel_scale[SC27XX_ADC_CHANNEL_MAX];
|
|
u32 base;
|
|
int value;
|
|
int irq;
|
|
};
|
|
|
|
struct sc27xx_adc_linear_graph {
|
|
int volt0;
|
|
int adc0;
|
|
int volt1;
|
|
int adc1;
|
|
};
|
|
|
|
/*
|
|
* According to the datasheet, we can convert one ADC value to one voltage value
|
|
* through 2 points in the linear graph. If the voltage is less than 1.2v, we
|
|
* should use the small-scale graph, and if more than 1.2v, we should use the
|
|
* big-scale graph.
|
|
*/
|
|
static struct sc27xx_adc_linear_graph big_scale_graph = {
|
|
4200, 3310,
|
|
3600, 2832,
|
|
};
|
|
|
|
static struct sc27xx_adc_linear_graph small_scale_graph = {
|
|
1000, 3413,
|
|
100, 341,
|
|
};
|
|
|
|
static const struct sc27xx_adc_linear_graph big_scale_graph_calib = {
|
|
4200, 856,
|
|
3600, 733,
|
|
};
|
|
|
|
static const struct sc27xx_adc_linear_graph small_scale_graph_calib = {
|
|
1000, 833,
|
|
100, 80,
|
|
};
|
|
|
|
static int sc27xx_adc_get_calib_data(u32 calib_data, int calib_adc)
|
|
{
|
|
return ((calib_data & 0xff) + calib_adc - 128) * 4;
|
|
}
|
|
|
|
static int sc27xx_adc_scale_calibration(struct sc27xx_adc_data *data,
|
|
bool big_scale)
|
|
{
|
|
const struct sc27xx_adc_linear_graph *calib_graph;
|
|
struct sc27xx_adc_linear_graph *graph;
|
|
struct nvmem_cell *cell;
|
|
const char *cell_name;
|
|
u32 calib_data = 0;
|
|
void *buf;
|
|
size_t len;
|
|
|
|
if (big_scale) {
|
|
calib_graph = &big_scale_graph_calib;
|
|
graph = &big_scale_graph;
|
|
cell_name = "big_scale_calib";
|
|
} else {
|
|
calib_graph = &small_scale_graph_calib;
|
|
graph = &small_scale_graph;
|
|
cell_name = "small_scale_calib";
|
|
}
|
|
|
|
cell = nvmem_cell_get(data->dev, cell_name);
|
|
if (IS_ERR(cell))
|
|
return PTR_ERR(cell);
|
|
|
|
buf = nvmem_cell_read(cell, &len);
|
|
nvmem_cell_put(cell);
|
|
|
|
if (IS_ERR(buf))
|
|
return PTR_ERR(buf);
|
|
|
|
memcpy(&calib_data, buf, min(len, sizeof(u32)));
|
|
|
|
/* Only need to calibrate the adc values in the linear graph. */
|
|
graph->adc0 = sc27xx_adc_get_calib_data(calib_data, calib_graph->adc0);
|
|
graph->adc1 = sc27xx_adc_get_calib_data(calib_data >> 8,
|
|
calib_graph->adc1);
|
|
|
|
kfree(buf);
|
|
return 0;
|
|
}
|
|
|
|
static int sc27xx_adc_get_ratio(int channel, int scale)
|
|
{
|
|
switch (channel) {
|
|
case 1:
|
|
case 2:
|
|
case 3:
|
|
case 4:
|
|
return scale ? SC27XX_VOLT_RATIO(400, 1025) :
|
|
SC27XX_VOLT_RATIO(1, 1);
|
|
case 5:
|
|
return SC27XX_VOLT_RATIO(7, 29);
|
|
case 6:
|
|
return SC27XX_VOLT_RATIO(375, 9000);
|
|
case 7:
|
|
case 8:
|
|
return scale ? SC27XX_VOLT_RATIO(100, 125) :
|
|
SC27XX_VOLT_RATIO(1, 1);
|
|
case 19:
|
|
return SC27XX_VOLT_RATIO(1, 3);
|
|
default:
|
|
return SC27XX_VOLT_RATIO(1, 1);
|
|
}
|
|
return SC27XX_VOLT_RATIO(1, 1);
|
|
}
|
|
|
|
static int sc27xx_adc_read(struct sc27xx_adc_data *data, int channel,
|
|
int scale, int *val)
|
|
{
|
|
int ret;
|
|
u32 tmp;
|
|
|
|
reinit_completion(&data->completion);
|
|
|
|
ret = hwspin_lock_timeout_raw(data->hwlock, SC27XX_ADC_HWLOCK_TIMEOUT);
|
|
if (ret) {
|
|
dev_err(data->dev, "timeout to get the hwspinlock\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = regmap_update_bits(data->regmap, data->base + SC27XX_ADC_CTL,
|
|
SC27XX_ADC_EN, SC27XX_ADC_EN);
|
|
if (ret)
|
|
goto unlock_adc;
|
|
|
|
/* Configure the channel id and scale */
|
|
tmp = (scale << SC27XX_ADC_SCALE_SHIFT) & SC27XX_ADC_SCALE_MASK;
|
|
tmp |= channel & SC27XX_ADC_CHN_ID_MASK;
|
|
ret = regmap_update_bits(data->regmap, data->base + SC27XX_ADC_CH_CFG,
|
|
SC27XX_ADC_CHN_ID_MASK | SC27XX_ADC_SCALE_MASK,
|
|
tmp);
|
|
if (ret)
|
|
goto disable_adc;
|
|
|
|
/* Select 12bit conversion mode, and only sample 1 time */
|
|
tmp = SC27XX_ADC_12BIT_MODE;
|
|
tmp |= (0 << SC27XX_ADC_RUN_NUM_SHIFT) & SC27XX_ADC_RUN_NUM_MASK;
|
|
ret = regmap_update_bits(data->regmap, data->base + SC27XX_ADC_CTL,
|
|
SC27XX_ADC_RUN_NUM_MASK | SC27XX_ADC_12BIT_MODE,
|
|
tmp);
|
|
if (ret)
|
|
goto disable_adc;
|
|
|
|
ret = regmap_update_bits(data->regmap, data->base + SC27XX_ADC_CTL,
|
|
SC27XX_ADC_CHN_RUN, SC27XX_ADC_CHN_RUN);
|
|
if (ret)
|
|
goto disable_adc;
|
|
|
|
wait_for_completion(&data->completion);
|
|
|
|
disable_adc:
|
|
regmap_update_bits(data->regmap, data->base + SC27XX_ADC_CTL,
|
|
SC27XX_ADC_EN, 0);
|
|
unlock_adc:
|
|
hwspin_unlock_raw(data->hwlock);
|
|
|
|
if (!ret)
|
|
*val = data->value;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static irqreturn_t sc27xx_adc_isr(int irq, void *dev_id)
|
|
{
|
|
struct sc27xx_adc_data *data = dev_id;
|
|
int ret;
|
|
|
|
ret = regmap_update_bits(data->regmap, data->base + SC27XX_ADC_INT_CLR,
|
|
SC27XX_ADC_IRQ_CLR, SC27XX_ADC_IRQ_CLR);
|
|
if (ret)
|
|
return IRQ_RETVAL(ret);
|
|
|
|
ret = regmap_read(data->regmap, data->base + SC27XX_ADC_DATA,
|
|
&data->value);
|
|
if (ret)
|
|
return IRQ_RETVAL(ret);
|
|
|
|
data->value &= SC27XX_ADC_DATA_MASK;
|
|
complete(&data->completion);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static void sc27xx_adc_volt_ratio(struct sc27xx_adc_data *data,
|
|
int channel, int scale,
|
|
u32 *div_numerator, u32 *div_denominator)
|
|
{
|
|
u32 ratio = sc27xx_adc_get_ratio(channel, scale);
|
|
|
|
*div_numerator = ratio >> SC27XX_RATIO_NUMERATOR_OFFSET;
|
|
*div_denominator = ratio & SC27XX_RATIO_DENOMINATOR_MASK;
|
|
}
|
|
|
|
static int sc27xx_adc_to_volt(struct sc27xx_adc_linear_graph *graph,
|
|
int raw_adc)
|
|
{
|
|
int tmp;
|
|
|
|
tmp = (graph->volt0 - graph->volt1) * (raw_adc - graph->adc1);
|
|
tmp /= (graph->adc0 - graph->adc1);
|
|
tmp += graph->volt1;
|
|
|
|
return tmp < 0 ? 0 : tmp;
|
|
}
|
|
|
|
static int sc27xx_adc_convert_volt(struct sc27xx_adc_data *data, int channel,
|
|
int scale, int raw_adc)
|
|
{
|
|
u32 numerator, denominator;
|
|
u32 volt;
|
|
|
|
/*
|
|
* Convert ADC values to voltage values according to the linear graph,
|
|
* and channel 5 and channel 1 has been calibrated, so we can just
|
|
* return the voltage values calculated by the linear graph. But other
|
|
* channels need be calculated to the real voltage values with the
|
|
* voltage ratio.
|
|
*/
|
|
switch (channel) {
|
|
case 5:
|
|
return sc27xx_adc_to_volt(&big_scale_graph, raw_adc);
|
|
|
|
case 1:
|
|
return sc27xx_adc_to_volt(&small_scale_graph, raw_adc);
|
|
|
|
default:
|
|
volt = sc27xx_adc_to_volt(&small_scale_graph, raw_adc);
|
|
break;
|
|
}
|
|
|
|
sc27xx_adc_volt_ratio(data, channel, scale, &numerator, &denominator);
|
|
|
|
return (volt * denominator + numerator / 2) / numerator;
|
|
}
|
|
|
|
static int sc27xx_adc_read_processed(struct sc27xx_adc_data *data,
|
|
int channel, int scale, int *val)
|
|
{
|
|
int ret, raw_adc;
|
|
|
|
ret = sc27xx_adc_read(data, channel, scale, &raw_adc);
|
|
if (ret)
|
|
return ret;
|
|
|
|
*val = sc27xx_adc_convert_volt(data, channel, scale, raw_adc);
|
|
return 0;
|
|
}
|
|
|
|
static int sc27xx_adc_read_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan,
|
|
int *val, int *val2, long mask)
|
|
{
|
|
struct sc27xx_adc_data *data = iio_priv(indio_dev);
|
|
int scale = data->channel_scale[chan->channel];
|
|
int ret, tmp;
|
|
|
|
switch (mask) {
|
|
case IIO_CHAN_INFO_RAW:
|
|
mutex_lock(&indio_dev->mlock);
|
|
ret = sc27xx_adc_read(data, chan->channel, scale, &tmp);
|
|
mutex_unlock(&indio_dev->mlock);
|
|
|
|
if (ret)
|
|
return ret;
|
|
|
|
*val = tmp;
|
|
return IIO_VAL_INT;
|
|
|
|
case IIO_CHAN_INFO_PROCESSED:
|
|
mutex_lock(&indio_dev->mlock);
|
|
ret = sc27xx_adc_read_processed(data, chan->channel, scale,
|
|
&tmp);
|
|
mutex_unlock(&indio_dev->mlock);
|
|
|
|
if (ret)
|
|
return ret;
|
|
|
|
*val = tmp;
|
|
return IIO_VAL_INT;
|
|
|
|
case IIO_CHAN_INFO_SCALE:
|
|
*val = scale;
|
|
return IIO_VAL_INT;
|
|
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
static int sc27xx_adc_write_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan,
|
|
int val, int val2, long mask)
|
|
{
|
|
struct sc27xx_adc_data *data = iio_priv(indio_dev);
|
|
|
|
switch (mask) {
|
|
case IIO_CHAN_INFO_SCALE:
|
|
data->channel_scale[chan->channel] = val;
|
|
return IIO_VAL_INT;
|
|
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
static const struct iio_info sc27xx_info = {
|
|
.read_raw = &sc27xx_adc_read_raw,
|
|
.write_raw = &sc27xx_adc_write_raw,
|
|
};
|
|
|
|
#define SC27XX_ADC_CHANNEL(index, mask) { \
|
|
.type = IIO_VOLTAGE, \
|
|
.channel = index, \
|
|
.info_mask_separate = mask | BIT(IIO_CHAN_INFO_SCALE), \
|
|
.datasheet_name = "CH##index", \
|
|
.indexed = 1, \
|
|
}
|
|
|
|
static const struct iio_chan_spec sc27xx_channels[] = {
|
|
SC27XX_ADC_CHANNEL(0, BIT(IIO_CHAN_INFO_PROCESSED)),
|
|
SC27XX_ADC_CHANNEL(1, BIT(IIO_CHAN_INFO_PROCESSED)),
|
|
SC27XX_ADC_CHANNEL(2, BIT(IIO_CHAN_INFO_PROCESSED)),
|
|
SC27XX_ADC_CHANNEL(3, BIT(IIO_CHAN_INFO_PROCESSED)),
|
|
SC27XX_ADC_CHANNEL(4, BIT(IIO_CHAN_INFO_PROCESSED)),
|
|
SC27XX_ADC_CHANNEL(5, BIT(IIO_CHAN_INFO_PROCESSED)),
|
|
SC27XX_ADC_CHANNEL(6, BIT(IIO_CHAN_INFO_PROCESSED)),
|
|
SC27XX_ADC_CHANNEL(7, BIT(IIO_CHAN_INFO_PROCESSED)),
|
|
SC27XX_ADC_CHANNEL(8, BIT(IIO_CHAN_INFO_PROCESSED)),
|
|
SC27XX_ADC_CHANNEL(9, BIT(IIO_CHAN_INFO_PROCESSED)),
|
|
SC27XX_ADC_CHANNEL(10, BIT(IIO_CHAN_INFO_PROCESSED)),
|
|
SC27XX_ADC_CHANNEL(11, BIT(IIO_CHAN_INFO_PROCESSED)),
|
|
SC27XX_ADC_CHANNEL(12, BIT(IIO_CHAN_INFO_PROCESSED)),
|
|
SC27XX_ADC_CHANNEL(13, BIT(IIO_CHAN_INFO_PROCESSED)),
|
|
SC27XX_ADC_CHANNEL(14, BIT(IIO_CHAN_INFO_PROCESSED)),
|
|
SC27XX_ADC_CHANNEL(15, BIT(IIO_CHAN_INFO_PROCESSED)),
|
|
SC27XX_ADC_CHANNEL(16, BIT(IIO_CHAN_INFO_PROCESSED)),
|
|
SC27XX_ADC_CHANNEL(17, BIT(IIO_CHAN_INFO_PROCESSED)),
|
|
SC27XX_ADC_CHANNEL(18, BIT(IIO_CHAN_INFO_PROCESSED)),
|
|
SC27XX_ADC_CHANNEL(19, BIT(IIO_CHAN_INFO_PROCESSED)),
|
|
SC27XX_ADC_CHANNEL(20, BIT(IIO_CHAN_INFO_RAW)),
|
|
SC27XX_ADC_CHANNEL(21, BIT(IIO_CHAN_INFO_PROCESSED)),
|
|
SC27XX_ADC_CHANNEL(22, BIT(IIO_CHAN_INFO_PROCESSED)),
|
|
SC27XX_ADC_CHANNEL(23, BIT(IIO_CHAN_INFO_PROCESSED)),
|
|
SC27XX_ADC_CHANNEL(24, BIT(IIO_CHAN_INFO_PROCESSED)),
|
|
SC27XX_ADC_CHANNEL(25, BIT(IIO_CHAN_INFO_PROCESSED)),
|
|
SC27XX_ADC_CHANNEL(26, BIT(IIO_CHAN_INFO_PROCESSED)),
|
|
SC27XX_ADC_CHANNEL(27, BIT(IIO_CHAN_INFO_PROCESSED)),
|
|
SC27XX_ADC_CHANNEL(28, BIT(IIO_CHAN_INFO_PROCESSED)),
|
|
SC27XX_ADC_CHANNEL(29, BIT(IIO_CHAN_INFO_PROCESSED)),
|
|
SC27XX_ADC_CHANNEL(30, BIT(IIO_CHAN_INFO_PROCESSED)),
|
|
SC27XX_ADC_CHANNEL(31, BIT(IIO_CHAN_INFO_PROCESSED)),
|
|
};
|
|
|
|
static int sc27xx_adc_enable(struct sc27xx_adc_data *data)
|
|
{
|
|
int ret;
|
|
|
|
ret = regmap_update_bits(data->regmap, SC27XX_MODULE_EN,
|
|
SC27XX_MODULE_ADC_EN, SC27XX_MODULE_ADC_EN);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Enable ADC work clock and controller clock */
|
|
ret = regmap_update_bits(data->regmap, SC27XX_ARM_CLK_EN,
|
|
SC27XX_CLK_ADC_EN | SC27XX_CLK_ADC_CLK_EN,
|
|
SC27XX_CLK_ADC_EN | SC27XX_CLK_ADC_CLK_EN);
|
|
if (ret)
|
|
goto disable_adc;
|
|
|
|
ret = regmap_update_bits(data->regmap, data->base + SC27XX_ADC_INT_EN,
|
|
SC27XX_ADC_IRQ_EN, SC27XX_ADC_IRQ_EN);
|
|
if (ret)
|
|
goto disable_clk;
|
|
|
|
/* ADC channel scales' calibration from nvmem device */
|
|
ret = sc27xx_adc_scale_calibration(data, true);
|
|
if (ret)
|
|
goto disable_clk;
|
|
|
|
ret = sc27xx_adc_scale_calibration(data, false);
|
|
if (ret)
|
|
goto disable_clk;
|
|
|
|
return 0;
|
|
|
|
disable_clk:
|
|
regmap_update_bits(data->regmap, SC27XX_ARM_CLK_EN,
|
|
SC27XX_CLK_ADC_EN | SC27XX_CLK_ADC_CLK_EN, 0);
|
|
disable_adc:
|
|
regmap_update_bits(data->regmap, SC27XX_MODULE_EN,
|
|
SC27XX_MODULE_ADC_EN, 0);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void sc27xx_adc_disable(void *_data)
|
|
{
|
|
struct sc27xx_adc_data *data = _data;
|
|
|
|
regmap_update_bits(data->regmap, data->base + SC27XX_ADC_INT_EN,
|
|
SC27XX_ADC_IRQ_EN, 0);
|
|
|
|
/* Disable ADC work clock and controller clock */
|
|
regmap_update_bits(data->regmap, SC27XX_ARM_CLK_EN,
|
|
SC27XX_CLK_ADC_EN | SC27XX_CLK_ADC_CLK_EN, 0);
|
|
|
|
regmap_update_bits(data->regmap, SC27XX_MODULE_EN,
|
|
SC27XX_MODULE_ADC_EN, 0);
|
|
}
|
|
|
|
static void sc27xx_adc_free_hwlock(void *_data)
|
|
{
|
|
struct hwspinlock *hwlock = _data;
|
|
|
|
hwspin_lock_free(hwlock);
|
|
}
|
|
|
|
static int sc27xx_adc_probe(struct platform_device *pdev)
|
|
{
|
|
struct device_node *np = pdev->dev.of_node;
|
|
struct sc27xx_adc_data *sc27xx_data;
|
|
struct iio_dev *indio_dev;
|
|
int ret;
|
|
|
|
indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*sc27xx_data));
|
|
if (!indio_dev)
|
|
return -ENOMEM;
|
|
|
|
sc27xx_data = iio_priv(indio_dev);
|
|
|
|
sc27xx_data->regmap = dev_get_regmap(pdev->dev.parent, NULL);
|
|
if (!sc27xx_data->regmap) {
|
|
dev_err(&pdev->dev, "failed to get ADC regmap\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
ret = of_property_read_u32(np, "reg", &sc27xx_data->base);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "failed to get ADC base address\n");
|
|
return ret;
|
|
}
|
|
|
|
sc27xx_data->irq = platform_get_irq(pdev, 0);
|
|
if (sc27xx_data->irq < 0) {
|
|
dev_err(&pdev->dev, "failed to get ADC irq number\n");
|
|
return sc27xx_data->irq;
|
|
}
|
|
|
|
ret = of_hwspin_lock_get_id(np, 0);
|
|
if (ret < 0) {
|
|
dev_err(&pdev->dev, "failed to get hwspinlock id\n");
|
|
return ret;
|
|
}
|
|
|
|
sc27xx_data->hwlock = hwspin_lock_request_specific(ret);
|
|
if (!sc27xx_data->hwlock) {
|
|
dev_err(&pdev->dev, "failed to request hwspinlock\n");
|
|
return -ENXIO;
|
|
}
|
|
|
|
ret = devm_add_action(&pdev->dev, sc27xx_adc_free_hwlock,
|
|
sc27xx_data->hwlock);
|
|
if (ret) {
|
|
sc27xx_adc_free_hwlock(sc27xx_data->hwlock);
|
|
dev_err(&pdev->dev, "failed to add hwspinlock action\n");
|
|
return ret;
|
|
}
|
|
|
|
init_completion(&sc27xx_data->completion);
|
|
sc27xx_data->dev = &pdev->dev;
|
|
|
|
ret = sc27xx_adc_enable(sc27xx_data);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "failed to enable ADC module\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = devm_add_action(&pdev->dev, sc27xx_adc_disable, sc27xx_data);
|
|
if (ret) {
|
|
sc27xx_adc_disable(sc27xx_data);
|
|
dev_err(&pdev->dev, "failed to add ADC disable action\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = devm_request_threaded_irq(&pdev->dev, sc27xx_data->irq, NULL,
|
|
sc27xx_adc_isr, IRQF_ONESHOT,
|
|
pdev->name, sc27xx_data);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "failed to request ADC irq\n");
|
|
return ret;
|
|
}
|
|
|
|
indio_dev->dev.parent = &pdev->dev;
|
|
indio_dev->name = dev_name(&pdev->dev);
|
|
indio_dev->modes = INDIO_DIRECT_MODE;
|
|
indio_dev->info = &sc27xx_info;
|
|
indio_dev->channels = sc27xx_channels;
|
|
indio_dev->num_channels = ARRAY_SIZE(sc27xx_channels);
|
|
ret = devm_iio_device_register(&pdev->dev, indio_dev);
|
|
if (ret)
|
|
dev_err(&pdev->dev, "could not register iio (ADC)");
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct of_device_id sc27xx_adc_of_match[] = {
|
|
{ .compatible = "sprd,sc2731-adc", },
|
|
{ }
|
|
};
|
|
|
|
static struct platform_driver sc27xx_adc_driver = {
|
|
.probe = sc27xx_adc_probe,
|
|
.driver = {
|
|
.name = "sc27xx-adc",
|
|
.of_match_table = sc27xx_adc_of_match,
|
|
},
|
|
};
|
|
|
|
module_platform_driver(sc27xx_adc_driver);
|
|
|
|
MODULE_AUTHOR("Freeman Liu <freeman.liu@spreadtrum.com>");
|
|
MODULE_DESCRIPTION("Spreadtrum SC27XX ADC Driver");
|
|
MODULE_LICENSE("GPL v2");
|