linux-sg2042/arch/x86/pci/broadcom_bus.c

102 lines
2.9 KiB
C

/*
* Read address ranges from a Broadcom CNB20LE Host Bridge
*
* Copyright (c) 2010 Ira W. Snyder <iws@ovro.caltech.edu>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/delay.h>
#include <linux/dmi.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <asm/pci_x86.h>
#include "bus_numa.h"
static void __devinit cnb20le_res(struct pci_dev *dev)
{
struct pci_root_info *info;
struct resource res;
u16 word1, word2;
u8 fbus, lbus;
int i;
/*
* The x86_pci_root_bus_res_quirks() function already refuses to use
* this information if ACPI _CRS was used. Therefore, we don't bother
* checking if ACPI is enabled, and just generate the information
* for both the ACPI _CRS and no ACPI cases.
*/
info = &pci_root_info[pci_root_num];
pci_root_num++;
/* read the PCI bus numbers */
pci_read_config_byte(dev, 0x44, &fbus);
pci_read_config_byte(dev, 0x45, &lbus);
info->bus_min = fbus;
info->bus_max = lbus;
/*
* Add the legacy IDE ports on bus 0
*
* These do not exist anywhere in the bridge registers, AFAICT. I do
* not have the datasheet, so this is the best I can do.
*/
if (fbus == 0) {
update_res(info, 0x01f0, 0x01f7, IORESOURCE_IO, 0);
update_res(info, 0x03f6, 0x03f6, IORESOURCE_IO, 0);
update_res(info, 0x0170, 0x0177, IORESOURCE_IO, 0);
update_res(info, 0x0376, 0x0376, IORESOURCE_IO, 0);
update_res(info, 0xffa0, 0xffaf, IORESOURCE_IO, 0);
}
/* read the non-prefetchable memory window */
pci_read_config_word(dev, 0xc0, &word1);
pci_read_config_word(dev, 0xc2, &word2);
if (word1 != word2) {
res.start = (word1 << 16) | 0x0000;
res.end = (word2 << 16) | 0xffff;
res.flags = IORESOURCE_MEM;
update_res(info, res.start, res.end, res.flags, 0);
}
/* read the prefetchable memory window */
pci_read_config_word(dev, 0xc4, &word1);
pci_read_config_word(dev, 0xc6, &word2);
if (word1 != word2) {
res.start = (word1 << 16) | 0x0000;
res.end = (word2 << 16) | 0xffff;
res.flags = IORESOURCE_MEM | IORESOURCE_PREFETCH;
update_res(info, res.start, res.end, res.flags, 0);
}
/* read the IO port window */
pci_read_config_word(dev, 0xd0, &word1);
pci_read_config_word(dev, 0xd2, &word2);
if (word1 != word2) {
res.start = word1;
res.end = word2;
res.flags = IORESOURCE_IO;
update_res(info, res.start, res.end, res.flags, 0);
}
/* print information about this host bridge */
res.start = fbus;
res.end = lbus;
res.flags = IORESOURCE_BUS;
dev_info(&dev->dev, "CNB20LE PCI Host Bridge (domain %04x %pR)\n",
pci_domain_nr(dev->bus), &res);
for (i = 0; i < info->res_num; i++)
dev_info(&dev->dev, "host bridge window %pR\n", &info->res[i]);
}
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_LE,
cnb20le_res);