1015 lines
28 KiB
C
1015 lines
28 KiB
C
/*
|
|
* TAS5086 ASoC codec driver
|
|
*
|
|
* Copyright (c) 2013 Daniel Mack <zonque@gmail.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version 2
|
|
* of the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* TODO:
|
|
* - implement DAPM and input muxing
|
|
* - implement modulation limit
|
|
* - implement non-default PWM start
|
|
*
|
|
* Note that this chip has a very unusual register layout, specifically
|
|
* because the registers are of unequal size, and multi-byte registers
|
|
* require bulk writes to take effect. Regmap does not support that kind
|
|
* of devices.
|
|
*
|
|
* Currently, the driver does not touch any of the registers >= 0x20, so
|
|
* it doesn't matter because the entire map can be accessed as 8-bit
|
|
* array. In case more features will be added in the future
|
|
* that require access to higher registers, the entire regmap H/W I/O
|
|
* routines have to be open-coded.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/of_gpio.h>
|
|
#include <sound/pcm.h>
|
|
#include <sound/pcm_params.h>
|
|
#include <sound/soc.h>
|
|
#include <sound/tlv.h>
|
|
#include <sound/tas5086.h>
|
|
|
|
#define TAS5086_PCM_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | \
|
|
SNDRV_PCM_FMTBIT_S20_3LE | \
|
|
SNDRV_PCM_FMTBIT_S24_3LE)
|
|
|
|
#define TAS5086_PCM_RATES (SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | \
|
|
SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_88200 | \
|
|
SNDRV_PCM_RATE_96000 | SNDRV_PCM_RATE_176400 | \
|
|
SNDRV_PCM_RATE_192000)
|
|
|
|
/*
|
|
* TAS5086 registers
|
|
*/
|
|
#define TAS5086_CLOCK_CONTROL 0x00 /* Clock control register */
|
|
#define TAS5086_CLOCK_RATE(val) (val << 5)
|
|
#define TAS5086_CLOCK_RATE_MASK (0x7 << 5)
|
|
#define TAS5086_CLOCK_RATIO(val) (val << 2)
|
|
#define TAS5086_CLOCK_RATIO_MASK (0x7 << 2)
|
|
#define TAS5086_CLOCK_SCLK_RATIO_48 (1 << 1)
|
|
#define TAS5086_CLOCK_VALID (1 << 0)
|
|
|
|
#define TAS5086_DEEMPH_MASK 0x03
|
|
#define TAS5086_SOFT_MUTE_ALL 0x3f
|
|
|
|
#define TAS5086_DEV_ID 0x01 /* Device ID register */
|
|
#define TAS5086_ERROR_STATUS 0x02 /* Error status register */
|
|
#define TAS5086_SYS_CONTROL_1 0x03 /* System control register 1 */
|
|
#define TAS5086_SERIAL_DATA_IF 0x04 /* Serial data interface register */
|
|
#define TAS5086_SYS_CONTROL_2 0x05 /* System control register 2 */
|
|
#define TAS5086_SOFT_MUTE 0x06 /* Soft mute register */
|
|
#define TAS5086_MASTER_VOL 0x07 /* Master volume */
|
|
#define TAS5086_CHANNEL_VOL(X) (0x08 + (X)) /* Channel 1-6 volume */
|
|
#define TAS5086_VOLUME_CONTROL 0x09 /* Volume control register */
|
|
#define TAS5086_MOD_LIMIT 0x10 /* Modulation limit register */
|
|
#define TAS5086_PWM_START 0x18 /* PWM start register */
|
|
#define TAS5086_SURROUND 0x19 /* Surround register */
|
|
#define TAS5086_SPLIT_CAP_CHARGE 0x1a /* Split cap charge period register */
|
|
#define TAS5086_OSC_TRIM 0x1b /* Oscillator trim register */
|
|
#define TAS5086_BKNDERR 0x1c
|
|
#define TAS5086_INPUT_MUX 0x20
|
|
#define TAS5086_PWM_OUTPUT_MUX 0x25
|
|
|
|
#define TAS5086_MAX_REGISTER TAS5086_PWM_OUTPUT_MUX
|
|
|
|
#define TAS5086_PWM_START_MIDZ_FOR_START_1 (1 << 7)
|
|
#define TAS5086_PWM_START_MIDZ_FOR_START_2 (1 << 6)
|
|
#define TAS5086_PWM_START_CHANNEL_MASK (0x3f)
|
|
|
|
/*
|
|
* Default TAS5086 power-up configuration
|
|
*/
|
|
static const struct reg_default tas5086_reg_defaults[] = {
|
|
{ 0x00, 0x6c },
|
|
{ 0x01, 0x03 },
|
|
{ 0x02, 0x00 },
|
|
{ 0x03, 0xa0 },
|
|
{ 0x04, 0x05 },
|
|
{ 0x05, 0x60 },
|
|
{ 0x06, 0x00 },
|
|
{ 0x07, 0xff },
|
|
{ 0x08, 0x30 },
|
|
{ 0x09, 0x30 },
|
|
{ 0x0a, 0x30 },
|
|
{ 0x0b, 0x30 },
|
|
{ 0x0c, 0x30 },
|
|
{ 0x0d, 0x30 },
|
|
{ 0x0e, 0xb1 },
|
|
{ 0x0f, 0x00 },
|
|
{ 0x10, 0x02 },
|
|
{ 0x11, 0x00 },
|
|
{ 0x12, 0x00 },
|
|
{ 0x13, 0x00 },
|
|
{ 0x14, 0x00 },
|
|
{ 0x15, 0x00 },
|
|
{ 0x16, 0x00 },
|
|
{ 0x17, 0x00 },
|
|
{ 0x18, 0x3f },
|
|
{ 0x19, 0x00 },
|
|
{ 0x1a, 0x18 },
|
|
{ 0x1b, 0x82 },
|
|
{ 0x1c, 0x05 },
|
|
};
|
|
|
|
static int tas5086_register_size(struct device *dev, unsigned int reg)
|
|
{
|
|
switch (reg) {
|
|
case TAS5086_CLOCK_CONTROL ... TAS5086_BKNDERR:
|
|
return 1;
|
|
case TAS5086_INPUT_MUX:
|
|
case TAS5086_PWM_OUTPUT_MUX:
|
|
return 4;
|
|
}
|
|
|
|
dev_err(dev, "Unsupported register address: %d\n", reg);
|
|
return 0;
|
|
}
|
|
|
|
static bool tas5086_accessible_reg(struct device *dev, unsigned int reg)
|
|
{
|
|
switch (reg) {
|
|
case 0x0f:
|
|
case 0x11 ... 0x17:
|
|
case 0x1d ... 0x1f:
|
|
return false;
|
|
default:
|
|
return true;
|
|
}
|
|
}
|
|
|
|
static bool tas5086_volatile_reg(struct device *dev, unsigned int reg)
|
|
{
|
|
switch (reg) {
|
|
case TAS5086_DEV_ID:
|
|
case TAS5086_ERROR_STATUS:
|
|
return true;
|
|
}
|
|
|
|
return false;
|
|
}
|
|
|
|
static bool tas5086_writeable_reg(struct device *dev, unsigned int reg)
|
|
{
|
|
return tas5086_accessible_reg(dev, reg) && (reg != TAS5086_DEV_ID);
|
|
}
|
|
|
|
static int tas5086_reg_write(void *context, unsigned int reg,
|
|
unsigned int value)
|
|
{
|
|
struct i2c_client *client = context;
|
|
unsigned int i, size;
|
|
uint8_t buf[5];
|
|
int ret;
|
|
|
|
size = tas5086_register_size(&client->dev, reg);
|
|
if (size == 0)
|
|
return -EINVAL;
|
|
|
|
buf[0] = reg;
|
|
|
|
for (i = size; i >= 1; --i) {
|
|
buf[i] = value;
|
|
value >>= 8;
|
|
}
|
|
|
|
ret = i2c_master_send(client, buf, size + 1);
|
|
if (ret == size + 1)
|
|
return 0;
|
|
else if (ret < 0)
|
|
return ret;
|
|
else
|
|
return -EIO;
|
|
}
|
|
|
|
static int tas5086_reg_read(void *context, unsigned int reg,
|
|
unsigned int *value)
|
|
{
|
|
struct i2c_client *client = context;
|
|
uint8_t send_buf, recv_buf[4];
|
|
struct i2c_msg msgs[2];
|
|
unsigned int size;
|
|
unsigned int i;
|
|
int ret;
|
|
|
|
size = tas5086_register_size(&client->dev, reg);
|
|
if (size == 0)
|
|
return -EINVAL;
|
|
|
|
send_buf = reg;
|
|
|
|
msgs[0].addr = client->addr;
|
|
msgs[0].len = sizeof(send_buf);
|
|
msgs[0].buf = &send_buf;
|
|
msgs[0].flags = 0;
|
|
|
|
msgs[1].addr = client->addr;
|
|
msgs[1].len = size;
|
|
msgs[1].buf = recv_buf;
|
|
msgs[1].flags = I2C_M_RD;
|
|
|
|
ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
|
|
if (ret < 0)
|
|
return ret;
|
|
else if (ret != ARRAY_SIZE(msgs))
|
|
return -EIO;
|
|
|
|
*value = 0;
|
|
|
|
for (i = 0; i < size; i++) {
|
|
*value <<= 8;
|
|
*value |= recv_buf[i];
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const char * const supply_names[] = {
|
|
"dvdd", "avdd"
|
|
};
|
|
|
|
struct tas5086_private {
|
|
struct regmap *regmap;
|
|
unsigned int mclk, sclk;
|
|
unsigned int format;
|
|
bool deemph;
|
|
unsigned int charge_period;
|
|
unsigned int pwm_start_mid_z;
|
|
/* Current sample rate for de-emphasis control */
|
|
int rate;
|
|
/* GPIO driving Reset pin, if any */
|
|
int gpio_nreset;
|
|
struct regulator_bulk_data supplies[ARRAY_SIZE(supply_names)];
|
|
};
|
|
|
|
static int tas5086_deemph[] = { 0, 32000, 44100, 48000 };
|
|
|
|
static int tas5086_set_deemph(struct snd_soc_codec *codec)
|
|
{
|
|
struct tas5086_private *priv = snd_soc_codec_get_drvdata(codec);
|
|
int i, val = 0;
|
|
|
|
if (priv->deemph) {
|
|
for (i = 0; i < ARRAY_SIZE(tas5086_deemph); i++) {
|
|
if (tas5086_deemph[i] == priv->rate) {
|
|
val = i;
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
return regmap_update_bits(priv->regmap, TAS5086_SYS_CONTROL_1,
|
|
TAS5086_DEEMPH_MASK, val);
|
|
}
|
|
|
|
static int tas5086_get_deemph(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct snd_soc_codec *codec = snd_soc_kcontrol_codec(kcontrol);
|
|
struct tas5086_private *priv = snd_soc_codec_get_drvdata(codec);
|
|
|
|
ucontrol->value.integer.value[0] = priv->deemph;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tas5086_put_deemph(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct snd_soc_codec *codec = snd_soc_kcontrol_codec(kcontrol);
|
|
struct tas5086_private *priv = snd_soc_codec_get_drvdata(codec);
|
|
|
|
priv->deemph = ucontrol->value.integer.value[0];
|
|
|
|
return tas5086_set_deemph(codec);
|
|
}
|
|
|
|
|
|
static int tas5086_set_dai_sysclk(struct snd_soc_dai *codec_dai,
|
|
int clk_id, unsigned int freq, int dir)
|
|
{
|
|
struct snd_soc_codec *codec = codec_dai->codec;
|
|
struct tas5086_private *priv = snd_soc_codec_get_drvdata(codec);
|
|
|
|
switch (clk_id) {
|
|
case TAS5086_CLK_IDX_MCLK:
|
|
priv->mclk = freq;
|
|
break;
|
|
case TAS5086_CLK_IDX_SCLK:
|
|
priv->sclk = freq;
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tas5086_set_dai_fmt(struct snd_soc_dai *codec_dai,
|
|
unsigned int format)
|
|
{
|
|
struct snd_soc_codec *codec = codec_dai->codec;
|
|
struct tas5086_private *priv = snd_soc_codec_get_drvdata(codec);
|
|
|
|
/* The TAS5086 can only be slave to all clocks */
|
|
if ((format & SND_SOC_DAIFMT_MASTER_MASK) != SND_SOC_DAIFMT_CBS_CFS) {
|
|
dev_err(codec->dev, "Invalid clocking mode\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* we need to refer to the data format from hw_params() */
|
|
priv->format = format;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const int tas5086_sample_rates[] = {
|
|
32000, 38000, 44100, 48000, 88200, 96000, 176400, 192000
|
|
};
|
|
|
|
static const int tas5086_ratios[] = {
|
|
64, 128, 192, 256, 384, 512
|
|
};
|
|
|
|
static int index_in_array(const int *array, int len, int needle)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < len; i++)
|
|
if (array[i] == needle)
|
|
return i;
|
|
|
|
return -ENOENT;
|
|
}
|
|
|
|
static int tas5086_hw_params(struct snd_pcm_substream *substream,
|
|
struct snd_pcm_hw_params *params,
|
|
struct snd_soc_dai *dai)
|
|
{
|
|
struct snd_soc_codec *codec = dai->codec;
|
|
struct tas5086_private *priv = snd_soc_codec_get_drvdata(codec);
|
|
int val;
|
|
int ret;
|
|
|
|
priv->rate = params_rate(params);
|
|
|
|
/* Look up the sample rate and refer to the offset in the list */
|
|
val = index_in_array(tas5086_sample_rates,
|
|
ARRAY_SIZE(tas5086_sample_rates), priv->rate);
|
|
|
|
if (val < 0) {
|
|
dev_err(codec->dev, "Invalid sample rate\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
ret = regmap_update_bits(priv->regmap, TAS5086_CLOCK_CONTROL,
|
|
TAS5086_CLOCK_RATE_MASK,
|
|
TAS5086_CLOCK_RATE(val));
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* MCLK / Fs ratio */
|
|
val = index_in_array(tas5086_ratios, ARRAY_SIZE(tas5086_ratios),
|
|
priv->mclk / priv->rate);
|
|
if (val < 0) {
|
|
dev_err(codec->dev, "Invalid MCLK / Fs ratio\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
ret = regmap_update_bits(priv->regmap, TAS5086_CLOCK_CONTROL,
|
|
TAS5086_CLOCK_RATIO_MASK,
|
|
TAS5086_CLOCK_RATIO(val));
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
|
|
ret = regmap_update_bits(priv->regmap, TAS5086_CLOCK_CONTROL,
|
|
TAS5086_CLOCK_SCLK_RATIO_48,
|
|
(priv->sclk == 48 * priv->rate) ?
|
|
TAS5086_CLOCK_SCLK_RATIO_48 : 0);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/*
|
|
* The chip has a very unituitive register mapping and muxes information
|
|
* about data format and sample depth into the same register, but not on
|
|
* a logical bit-boundary. Hence, we have to refer to the format passed
|
|
* in the set_dai_fmt() callback and set up everything from here.
|
|
*
|
|
* First, determine the 'base' value, using the format ...
|
|
*/
|
|
switch (priv->format & SND_SOC_DAIFMT_FORMAT_MASK) {
|
|
case SND_SOC_DAIFMT_RIGHT_J:
|
|
val = 0x00;
|
|
break;
|
|
case SND_SOC_DAIFMT_I2S:
|
|
val = 0x03;
|
|
break;
|
|
case SND_SOC_DAIFMT_LEFT_J:
|
|
val = 0x06;
|
|
break;
|
|
default:
|
|
dev_err(codec->dev, "Invalid DAI format\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* ... then add the offset for the sample bit depth. */
|
|
switch (params_width(params)) {
|
|
case 16:
|
|
val += 0;
|
|
break;
|
|
case 20:
|
|
val += 1;
|
|
break;
|
|
case 24:
|
|
val += 2;
|
|
break;
|
|
default:
|
|
dev_err(codec->dev, "Invalid bit width\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
ret = regmap_write(priv->regmap, TAS5086_SERIAL_DATA_IF, val);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* clock is considered valid now */
|
|
ret = regmap_update_bits(priv->regmap, TAS5086_CLOCK_CONTROL,
|
|
TAS5086_CLOCK_VALID, TAS5086_CLOCK_VALID);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return tas5086_set_deemph(codec);
|
|
}
|
|
|
|
static int tas5086_mute_stream(struct snd_soc_dai *dai, int mute, int stream)
|
|
{
|
|
struct snd_soc_codec *codec = dai->codec;
|
|
struct tas5086_private *priv = snd_soc_codec_get_drvdata(codec);
|
|
unsigned int val = 0;
|
|
|
|
if (mute)
|
|
val = TAS5086_SOFT_MUTE_ALL;
|
|
|
|
return regmap_write(priv->regmap, TAS5086_SOFT_MUTE, val);
|
|
}
|
|
|
|
static void tas5086_reset(struct tas5086_private *priv)
|
|
{
|
|
if (gpio_is_valid(priv->gpio_nreset)) {
|
|
/* Reset codec - minimum assertion time is 400ns */
|
|
gpio_direction_output(priv->gpio_nreset, 0);
|
|
udelay(1);
|
|
gpio_set_value(priv->gpio_nreset, 1);
|
|
|
|
/* Codec needs ~15ms to wake up */
|
|
msleep(15);
|
|
}
|
|
}
|
|
|
|
/* charge period values in microseconds */
|
|
static const int tas5086_charge_period[] = {
|
|
13000, 16900, 23400, 31200, 41600, 54600, 72800, 96200,
|
|
130000, 156000, 234000, 312000, 416000, 546000, 728000, 962000,
|
|
1300000, 169000, 2340000, 3120000, 4160000, 5460000, 7280000, 9620000,
|
|
};
|
|
|
|
static int tas5086_init(struct device *dev, struct tas5086_private *priv)
|
|
{
|
|
int ret, i;
|
|
|
|
/*
|
|
* If any of the channels is configured to start in Mid-Z mode,
|
|
* configure 'part 1' of the PWM starts to use Mid-Z, and tell
|
|
* all configured mid-z channels to start start under 'part 1'.
|
|
*/
|
|
if (priv->pwm_start_mid_z)
|
|
regmap_write(priv->regmap, TAS5086_PWM_START,
|
|
TAS5086_PWM_START_MIDZ_FOR_START_1 |
|
|
priv->pwm_start_mid_z);
|
|
|
|
/* lookup and set split-capacitor charge period */
|
|
if (priv->charge_period == 0) {
|
|
regmap_write(priv->regmap, TAS5086_SPLIT_CAP_CHARGE, 0);
|
|
} else {
|
|
i = index_in_array(tas5086_charge_period,
|
|
ARRAY_SIZE(tas5086_charge_period),
|
|
priv->charge_period);
|
|
if (i >= 0)
|
|
regmap_write(priv->regmap, TAS5086_SPLIT_CAP_CHARGE,
|
|
i + 0x08);
|
|
else
|
|
dev_warn(dev,
|
|
"Invalid split-cap charge period of %d ns.\n",
|
|
priv->charge_period);
|
|
}
|
|
|
|
/* enable factory trim */
|
|
ret = regmap_write(priv->regmap, TAS5086_OSC_TRIM, 0x00);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* start all channels */
|
|
ret = regmap_write(priv->regmap, TAS5086_SYS_CONTROL_2, 0x20);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* mute all channels for now */
|
|
ret = regmap_write(priv->regmap, TAS5086_SOFT_MUTE,
|
|
TAS5086_SOFT_MUTE_ALL);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* TAS5086 controls */
|
|
static const DECLARE_TLV_DB_SCALE(tas5086_dac_tlv, -10350, 50, 1);
|
|
|
|
static const struct snd_kcontrol_new tas5086_controls[] = {
|
|
SOC_SINGLE_TLV("Master Playback Volume", TAS5086_MASTER_VOL,
|
|
0, 0xff, 1, tas5086_dac_tlv),
|
|
SOC_DOUBLE_R_TLV("Channel 1/2 Playback Volume",
|
|
TAS5086_CHANNEL_VOL(0), TAS5086_CHANNEL_VOL(1),
|
|
0, 0xff, 1, tas5086_dac_tlv),
|
|
SOC_DOUBLE_R_TLV("Channel 3/4 Playback Volume",
|
|
TAS5086_CHANNEL_VOL(2), TAS5086_CHANNEL_VOL(3),
|
|
0, 0xff, 1, tas5086_dac_tlv),
|
|
SOC_DOUBLE_R_TLV("Channel 5/6 Playback Volume",
|
|
TAS5086_CHANNEL_VOL(4), TAS5086_CHANNEL_VOL(5),
|
|
0, 0xff, 1, tas5086_dac_tlv),
|
|
SOC_SINGLE_BOOL_EXT("De-emphasis Switch", 0,
|
|
tas5086_get_deemph, tas5086_put_deemph),
|
|
};
|
|
|
|
/* Input mux controls */
|
|
static const char *tas5086_dapm_sdin_texts[] =
|
|
{
|
|
"SDIN1-L", "SDIN1-R", "SDIN2-L", "SDIN2-R",
|
|
"SDIN3-L", "SDIN3-R", "Ground (0)", "nc"
|
|
};
|
|
|
|
static const struct soc_enum tas5086_dapm_input_mux_enum[] = {
|
|
SOC_ENUM_SINGLE(TAS5086_INPUT_MUX, 20, 8, tas5086_dapm_sdin_texts),
|
|
SOC_ENUM_SINGLE(TAS5086_INPUT_MUX, 16, 8, tas5086_dapm_sdin_texts),
|
|
SOC_ENUM_SINGLE(TAS5086_INPUT_MUX, 12, 8, tas5086_dapm_sdin_texts),
|
|
SOC_ENUM_SINGLE(TAS5086_INPUT_MUX, 8, 8, tas5086_dapm_sdin_texts),
|
|
SOC_ENUM_SINGLE(TAS5086_INPUT_MUX, 4, 8, tas5086_dapm_sdin_texts),
|
|
SOC_ENUM_SINGLE(TAS5086_INPUT_MUX, 0, 8, tas5086_dapm_sdin_texts),
|
|
};
|
|
|
|
static const struct snd_kcontrol_new tas5086_dapm_input_mux_controls[] = {
|
|
SOC_DAPM_ENUM("Channel 1 input", tas5086_dapm_input_mux_enum[0]),
|
|
SOC_DAPM_ENUM("Channel 2 input", tas5086_dapm_input_mux_enum[1]),
|
|
SOC_DAPM_ENUM("Channel 3 input", tas5086_dapm_input_mux_enum[2]),
|
|
SOC_DAPM_ENUM("Channel 4 input", tas5086_dapm_input_mux_enum[3]),
|
|
SOC_DAPM_ENUM("Channel 5 input", tas5086_dapm_input_mux_enum[4]),
|
|
SOC_DAPM_ENUM("Channel 6 input", tas5086_dapm_input_mux_enum[5]),
|
|
};
|
|
|
|
/* Output mux controls */
|
|
static const char *tas5086_dapm_channel_texts[] =
|
|
{ "Channel 1 Mux", "Channel 2 Mux", "Channel 3 Mux",
|
|
"Channel 4 Mux", "Channel 5 Mux", "Channel 6 Mux" };
|
|
|
|
static const struct soc_enum tas5086_dapm_output_mux_enum[] = {
|
|
SOC_ENUM_SINGLE(TAS5086_PWM_OUTPUT_MUX, 20, 6, tas5086_dapm_channel_texts),
|
|
SOC_ENUM_SINGLE(TAS5086_PWM_OUTPUT_MUX, 16, 6, tas5086_dapm_channel_texts),
|
|
SOC_ENUM_SINGLE(TAS5086_PWM_OUTPUT_MUX, 12, 6, tas5086_dapm_channel_texts),
|
|
SOC_ENUM_SINGLE(TAS5086_PWM_OUTPUT_MUX, 8, 6, tas5086_dapm_channel_texts),
|
|
SOC_ENUM_SINGLE(TAS5086_PWM_OUTPUT_MUX, 4, 6, tas5086_dapm_channel_texts),
|
|
SOC_ENUM_SINGLE(TAS5086_PWM_OUTPUT_MUX, 0, 6, tas5086_dapm_channel_texts),
|
|
};
|
|
|
|
static const struct snd_kcontrol_new tas5086_dapm_output_mux_controls[] = {
|
|
SOC_DAPM_ENUM("PWM1 Output", tas5086_dapm_output_mux_enum[0]),
|
|
SOC_DAPM_ENUM("PWM2 Output", tas5086_dapm_output_mux_enum[1]),
|
|
SOC_DAPM_ENUM("PWM3 Output", tas5086_dapm_output_mux_enum[2]),
|
|
SOC_DAPM_ENUM("PWM4 Output", tas5086_dapm_output_mux_enum[3]),
|
|
SOC_DAPM_ENUM("PWM5 Output", tas5086_dapm_output_mux_enum[4]),
|
|
SOC_DAPM_ENUM("PWM6 Output", tas5086_dapm_output_mux_enum[5]),
|
|
};
|
|
|
|
static const struct snd_soc_dapm_widget tas5086_dapm_widgets[] = {
|
|
SND_SOC_DAPM_INPUT("SDIN1-L"),
|
|
SND_SOC_DAPM_INPUT("SDIN1-R"),
|
|
SND_SOC_DAPM_INPUT("SDIN2-L"),
|
|
SND_SOC_DAPM_INPUT("SDIN2-R"),
|
|
SND_SOC_DAPM_INPUT("SDIN3-L"),
|
|
SND_SOC_DAPM_INPUT("SDIN3-R"),
|
|
SND_SOC_DAPM_INPUT("SDIN4-L"),
|
|
SND_SOC_DAPM_INPUT("SDIN4-R"),
|
|
|
|
SND_SOC_DAPM_OUTPUT("PWM1"),
|
|
SND_SOC_DAPM_OUTPUT("PWM2"),
|
|
SND_SOC_DAPM_OUTPUT("PWM3"),
|
|
SND_SOC_DAPM_OUTPUT("PWM4"),
|
|
SND_SOC_DAPM_OUTPUT("PWM5"),
|
|
SND_SOC_DAPM_OUTPUT("PWM6"),
|
|
|
|
SND_SOC_DAPM_MUX("Channel 1 Mux", SND_SOC_NOPM, 0, 0,
|
|
&tas5086_dapm_input_mux_controls[0]),
|
|
SND_SOC_DAPM_MUX("Channel 2 Mux", SND_SOC_NOPM, 0, 0,
|
|
&tas5086_dapm_input_mux_controls[1]),
|
|
SND_SOC_DAPM_MUX("Channel 3 Mux", SND_SOC_NOPM, 0, 0,
|
|
&tas5086_dapm_input_mux_controls[2]),
|
|
SND_SOC_DAPM_MUX("Channel 4 Mux", SND_SOC_NOPM, 0, 0,
|
|
&tas5086_dapm_input_mux_controls[3]),
|
|
SND_SOC_DAPM_MUX("Channel 5 Mux", SND_SOC_NOPM, 0, 0,
|
|
&tas5086_dapm_input_mux_controls[4]),
|
|
SND_SOC_DAPM_MUX("Channel 6 Mux", SND_SOC_NOPM, 0, 0,
|
|
&tas5086_dapm_input_mux_controls[5]),
|
|
|
|
SND_SOC_DAPM_MUX("PWM1 Mux", SND_SOC_NOPM, 0, 0,
|
|
&tas5086_dapm_output_mux_controls[0]),
|
|
SND_SOC_DAPM_MUX("PWM2 Mux", SND_SOC_NOPM, 0, 0,
|
|
&tas5086_dapm_output_mux_controls[1]),
|
|
SND_SOC_DAPM_MUX("PWM3 Mux", SND_SOC_NOPM, 0, 0,
|
|
&tas5086_dapm_output_mux_controls[2]),
|
|
SND_SOC_DAPM_MUX("PWM4 Mux", SND_SOC_NOPM, 0, 0,
|
|
&tas5086_dapm_output_mux_controls[3]),
|
|
SND_SOC_DAPM_MUX("PWM5 Mux", SND_SOC_NOPM, 0, 0,
|
|
&tas5086_dapm_output_mux_controls[4]),
|
|
SND_SOC_DAPM_MUX("PWM6 Mux", SND_SOC_NOPM, 0, 0,
|
|
&tas5086_dapm_output_mux_controls[5]),
|
|
};
|
|
|
|
static const struct snd_soc_dapm_route tas5086_dapm_routes[] = {
|
|
/* SDIN inputs -> channel muxes */
|
|
{ "Channel 1 Mux", "SDIN1-L", "SDIN1-L" },
|
|
{ "Channel 1 Mux", "SDIN1-R", "SDIN1-R" },
|
|
{ "Channel 1 Mux", "SDIN2-L", "SDIN2-L" },
|
|
{ "Channel 1 Mux", "SDIN2-R", "SDIN2-R" },
|
|
{ "Channel 1 Mux", "SDIN3-L", "SDIN3-L" },
|
|
{ "Channel 1 Mux", "SDIN3-R", "SDIN3-R" },
|
|
|
|
{ "Channel 2 Mux", "SDIN1-L", "SDIN1-L" },
|
|
{ "Channel 2 Mux", "SDIN1-R", "SDIN1-R" },
|
|
{ "Channel 2 Mux", "SDIN2-L", "SDIN2-L" },
|
|
{ "Channel 2 Mux", "SDIN2-R", "SDIN2-R" },
|
|
{ "Channel 2 Mux", "SDIN3-L", "SDIN3-L" },
|
|
{ "Channel 2 Mux", "SDIN3-R", "SDIN3-R" },
|
|
|
|
{ "Channel 2 Mux", "SDIN1-L", "SDIN1-L" },
|
|
{ "Channel 2 Mux", "SDIN1-R", "SDIN1-R" },
|
|
{ "Channel 2 Mux", "SDIN2-L", "SDIN2-L" },
|
|
{ "Channel 2 Mux", "SDIN2-R", "SDIN2-R" },
|
|
{ "Channel 2 Mux", "SDIN3-L", "SDIN3-L" },
|
|
{ "Channel 2 Mux", "SDIN3-R", "SDIN3-R" },
|
|
|
|
{ "Channel 3 Mux", "SDIN1-L", "SDIN1-L" },
|
|
{ "Channel 3 Mux", "SDIN1-R", "SDIN1-R" },
|
|
{ "Channel 3 Mux", "SDIN2-L", "SDIN2-L" },
|
|
{ "Channel 3 Mux", "SDIN2-R", "SDIN2-R" },
|
|
{ "Channel 3 Mux", "SDIN3-L", "SDIN3-L" },
|
|
{ "Channel 3 Mux", "SDIN3-R", "SDIN3-R" },
|
|
|
|
{ "Channel 4 Mux", "SDIN1-L", "SDIN1-L" },
|
|
{ "Channel 4 Mux", "SDIN1-R", "SDIN1-R" },
|
|
{ "Channel 4 Mux", "SDIN2-L", "SDIN2-L" },
|
|
{ "Channel 4 Mux", "SDIN2-R", "SDIN2-R" },
|
|
{ "Channel 4 Mux", "SDIN3-L", "SDIN3-L" },
|
|
{ "Channel 4 Mux", "SDIN3-R", "SDIN3-R" },
|
|
|
|
{ "Channel 5 Mux", "SDIN1-L", "SDIN1-L" },
|
|
{ "Channel 5 Mux", "SDIN1-R", "SDIN1-R" },
|
|
{ "Channel 5 Mux", "SDIN2-L", "SDIN2-L" },
|
|
{ "Channel 5 Mux", "SDIN2-R", "SDIN2-R" },
|
|
{ "Channel 5 Mux", "SDIN3-L", "SDIN3-L" },
|
|
{ "Channel 5 Mux", "SDIN3-R", "SDIN3-R" },
|
|
|
|
{ "Channel 6 Mux", "SDIN1-L", "SDIN1-L" },
|
|
{ "Channel 6 Mux", "SDIN1-R", "SDIN1-R" },
|
|
{ "Channel 6 Mux", "SDIN2-L", "SDIN2-L" },
|
|
{ "Channel 6 Mux", "SDIN2-R", "SDIN2-R" },
|
|
{ "Channel 6 Mux", "SDIN3-L", "SDIN3-L" },
|
|
{ "Channel 6 Mux", "SDIN3-R", "SDIN3-R" },
|
|
|
|
/* Channel muxes -> PWM muxes */
|
|
{ "PWM1 Mux", "Channel 1 Mux", "Channel 1 Mux" },
|
|
{ "PWM2 Mux", "Channel 1 Mux", "Channel 1 Mux" },
|
|
{ "PWM3 Mux", "Channel 1 Mux", "Channel 1 Mux" },
|
|
{ "PWM4 Mux", "Channel 1 Mux", "Channel 1 Mux" },
|
|
{ "PWM5 Mux", "Channel 1 Mux", "Channel 1 Mux" },
|
|
{ "PWM6 Mux", "Channel 1 Mux", "Channel 1 Mux" },
|
|
|
|
{ "PWM1 Mux", "Channel 2 Mux", "Channel 2 Mux" },
|
|
{ "PWM2 Mux", "Channel 2 Mux", "Channel 2 Mux" },
|
|
{ "PWM3 Mux", "Channel 2 Mux", "Channel 2 Mux" },
|
|
{ "PWM4 Mux", "Channel 2 Mux", "Channel 2 Mux" },
|
|
{ "PWM5 Mux", "Channel 2 Mux", "Channel 2 Mux" },
|
|
{ "PWM6 Mux", "Channel 2 Mux", "Channel 2 Mux" },
|
|
|
|
{ "PWM1 Mux", "Channel 3 Mux", "Channel 3 Mux" },
|
|
{ "PWM2 Mux", "Channel 3 Mux", "Channel 3 Mux" },
|
|
{ "PWM3 Mux", "Channel 3 Mux", "Channel 3 Mux" },
|
|
{ "PWM4 Mux", "Channel 3 Mux", "Channel 3 Mux" },
|
|
{ "PWM5 Mux", "Channel 3 Mux", "Channel 3 Mux" },
|
|
{ "PWM6 Mux", "Channel 3 Mux", "Channel 3 Mux" },
|
|
|
|
{ "PWM1 Mux", "Channel 4 Mux", "Channel 4 Mux" },
|
|
{ "PWM2 Mux", "Channel 4 Mux", "Channel 4 Mux" },
|
|
{ "PWM3 Mux", "Channel 4 Mux", "Channel 4 Mux" },
|
|
{ "PWM4 Mux", "Channel 4 Mux", "Channel 4 Mux" },
|
|
{ "PWM5 Mux", "Channel 4 Mux", "Channel 4 Mux" },
|
|
{ "PWM6 Mux", "Channel 4 Mux", "Channel 4 Mux" },
|
|
|
|
{ "PWM1 Mux", "Channel 5 Mux", "Channel 5 Mux" },
|
|
{ "PWM2 Mux", "Channel 5 Mux", "Channel 5 Mux" },
|
|
{ "PWM3 Mux", "Channel 5 Mux", "Channel 5 Mux" },
|
|
{ "PWM4 Mux", "Channel 5 Mux", "Channel 5 Mux" },
|
|
{ "PWM5 Mux", "Channel 5 Mux", "Channel 5 Mux" },
|
|
{ "PWM6 Mux", "Channel 5 Mux", "Channel 5 Mux" },
|
|
|
|
{ "PWM1 Mux", "Channel 6 Mux", "Channel 6 Mux" },
|
|
{ "PWM2 Mux", "Channel 6 Mux", "Channel 6 Mux" },
|
|
{ "PWM3 Mux", "Channel 6 Mux", "Channel 6 Mux" },
|
|
{ "PWM4 Mux", "Channel 6 Mux", "Channel 6 Mux" },
|
|
{ "PWM5 Mux", "Channel 6 Mux", "Channel 6 Mux" },
|
|
{ "PWM6 Mux", "Channel 6 Mux", "Channel 6 Mux" },
|
|
|
|
/* The PWM muxes are directly connected to the PWM outputs */
|
|
{ "PWM1", NULL, "PWM1 Mux" },
|
|
{ "PWM2", NULL, "PWM2 Mux" },
|
|
{ "PWM3", NULL, "PWM3 Mux" },
|
|
{ "PWM4", NULL, "PWM4 Mux" },
|
|
{ "PWM5", NULL, "PWM5 Mux" },
|
|
{ "PWM6", NULL, "PWM6 Mux" },
|
|
|
|
};
|
|
|
|
static const struct snd_soc_dai_ops tas5086_dai_ops = {
|
|
.hw_params = tas5086_hw_params,
|
|
.set_sysclk = tas5086_set_dai_sysclk,
|
|
.set_fmt = tas5086_set_dai_fmt,
|
|
.mute_stream = tas5086_mute_stream,
|
|
};
|
|
|
|
static struct snd_soc_dai_driver tas5086_dai = {
|
|
.name = "tas5086-hifi",
|
|
.playback = {
|
|
.stream_name = "Playback",
|
|
.channels_min = 2,
|
|
.channels_max = 6,
|
|
.rates = TAS5086_PCM_RATES,
|
|
.formats = TAS5086_PCM_FORMATS,
|
|
},
|
|
.ops = &tas5086_dai_ops,
|
|
};
|
|
|
|
#ifdef CONFIG_PM
|
|
static int tas5086_soc_suspend(struct snd_soc_codec *codec)
|
|
{
|
|
struct tas5086_private *priv = snd_soc_codec_get_drvdata(codec);
|
|
int ret;
|
|
|
|
/* Shut down all channels */
|
|
ret = regmap_write(priv->regmap, TAS5086_SYS_CONTROL_2, 0x60);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
regulator_bulk_disable(ARRAY_SIZE(priv->supplies), priv->supplies);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tas5086_soc_resume(struct snd_soc_codec *codec)
|
|
{
|
|
struct tas5086_private *priv = snd_soc_codec_get_drvdata(codec);
|
|
int ret;
|
|
|
|
ret = regulator_bulk_enable(ARRAY_SIZE(priv->supplies), priv->supplies);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
tas5086_reset(priv);
|
|
regcache_mark_dirty(priv->regmap);
|
|
|
|
ret = tas5086_init(codec->dev, priv);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = regcache_sync(priv->regmap);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
#else
|
|
#define tas5086_soc_suspend NULL
|
|
#define tas5086_soc_resume NULL
|
|
#endif /* CONFIG_PM */
|
|
|
|
#ifdef CONFIG_OF
|
|
static const struct of_device_id tas5086_dt_ids[] = {
|
|
{ .compatible = "ti,tas5086", },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, tas5086_dt_ids);
|
|
#endif
|
|
|
|
static int tas5086_probe(struct snd_soc_codec *codec)
|
|
{
|
|
struct tas5086_private *priv = snd_soc_codec_get_drvdata(codec);
|
|
int i, ret;
|
|
|
|
ret = regulator_bulk_enable(ARRAY_SIZE(priv->supplies), priv->supplies);
|
|
if (ret < 0) {
|
|
dev_err(codec->dev, "Failed to enable regulators: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
priv->pwm_start_mid_z = 0;
|
|
priv->charge_period = 1300000; /* hardware default is 1300 ms */
|
|
|
|
if (of_match_device(of_match_ptr(tas5086_dt_ids), codec->dev)) {
|
|
struct device_node *of_node = codec->dev->of_node;
|
|
|
|
of_property_read_u32(of_node, "ti,charge-period",
|
|
&priv->charge_period);
|
|
|
|
for (i = 0; i < 6; i++) {
|
|
char name[25];
|
|
|
|
snprintf(name, sizeof(name),
|
|
"ti,mid-z-channel-%d", i + 1);
|
|
|
|
if (of_get_property(of_node, name, NULL) != NULL)
|
|
priv->pwm_start_mid_z |= 1 << i;
|
|
}
|
|
}
|
|
|
|
tas5086_reset(priv);
|
|
ret = tas5086_init(codec->dev, priv);
|
|
if (ret < 0)
|
|
goto exit_disable_regulators;
|
|
|
|
/* set master volume to 0 dB */
|
|
ret = regmap_write(priv->regmap, TAS5086_MASTER_VOL, 0x30);
|
|
if (ret < 0)
|
|
goto exit_disable_regulators;
|
|
|
|
return 0;
|
|
|
|
exit_disable_regulators:
|
|
regulator_bulk_disable(ARRAY_SIZE(priv->supplies), priv->supplies);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int tas5086_remove(struct snd_soc_codec *codec)
|
|
{
|
|
struct tas5086_private *priv = snd_soc_codec_get_drvdata(codec);
|
|
|
|
if (gpio_is_valid(priv->gpio_nreset))
|
|
/* Set codec to the reset state */
|
|
gpio_set_value(priv->gpio_nreset, 0);
|
|
|
|
regulator_bulk_disable(ARRAY_SIZE(priv->supplies), priv->supplies);
|
|
|
|
return 0;
|
|
};
|
|
|
|
static struct snd_soc_codec_driver soc_codec_dev_tas5086 = {
|
|
.probe = tas5086_probe,
|
|
.remove = tas5086_remove,
|
|
.suspend = tas5086_soc_suspend,
|
|
.resume = tas5086_soc_resume,
|
|
.component_driver = {
|
|
.controls = tas5086_controls,
|
|
.num_controls = ARRAY_SIZE(tas5086_controls),
|
|
.dapm_widgets = tas5086_dapm_widgets,
|
|
.num_dapm_widgets = ARRAY_SIZE(tas5086_dapm_widgets),
|
|
.dapm_routes = tas5086_dapm_routes,
|
|
.num_dapm_routes = ARRAY_SIZE(tas5086_dapm_routes),
|
|
},
|
|
};
|
|
|
|
static const struct i2c_device_id tas5086_i2c_id[] = {
|
|
{ "tas5086", 0 },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, tas5086_i2c_id);
|
|
|
|
static const struct regmap_config tas5086_regmap = {
|
|
.reg_bits = 8,
|
|
.val_bits = 32,
|
|
.max_register = TAS5086_MAX_REGISTER,
|
|
.reg_defaults = tas5086_reg_defaults,
|
|
.num_reg_defaults = ARRAY_SIZE(tas5086_reg_defaults),
|
|
.cache_type = REGCACHE_RBTREE,
|
|
.volatile_reg = tas5086_volatile_reg,
|
|
.writeable_reg = tas5086_writeable_reg,
|
|
.readable_reg = tas5086_accessible_reg,
|
|
.reg_read = tas5086_reg_read,
|
|
.reg_write = tas5086_reg_write,
|
|
};
|
|
|
|
static int tas5086_i2c_probe(struct i2c_client *i2c,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct tas5086_private *priv;
|
|
struct device *dev = &i2c->dev;
|
|
int gpio_nreset = -EINVAL;
|
|
int i, ret;
|
|
|
|
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
|
|
if (!priv)
|
|
return -ENOMEM;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(supply_names); i++)
|
|
priv->supplies[i].supply = supply_names[i];
|
|
|
|
ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(priv->supplies),
|
|
priv->supplies);
|
|
if (ret < 0) {
|
|
dev_err(dev, "Failed to get regulators: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
priv->regmap = devm_regmap_init(dev, NULL, i2c, &tas5086_regmap);
|
|
if (IS_ERR(priv->regmap)) {
|
|
ret = PTR_ERR(priv->regmap);
|
|
dev_err(&i2c->dev, "Failed to create regmap: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
i2c_set_clientdata(i2c, priv);
|
|
|
|
if (of_match_device(of_match_ptr(tas5086_dt_ids), dev)) {
|
|
struct device_node *of_node = dev->of_node;
|
|
gpio_nreset = of_get_named_gpio(of_node, "reset-gpio", 0);
|
|
}
|
|
|
|
if (gpio_is_valid(gpio_nreset))
|
|
if (devm_gpio_request(dev, gpio_nreset, "TAS5086 Reset"))
|
|
gpio_nreset = -EINVAL;
|
|
|
|
priv->gpio_nreset = gpio_nreset;
|
|
|
|
ret = regulator_bulk_enable(ARRAY_SIZE(priv->supplies), priv->supplies);
|
|
if (ret < 0) {
|
|
dev_err(dev, "Failed to enable regulators: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
tas5086_reset(priv);
|
|
|
|
/* The TAS5086 always returns 0x03 in its TAS5086_DEV_ID register */
|
|
ret = regmap_read(priv->regmap, TAS5086_DEV_ID, &i);
|
|
if (ret == 0 && i != 0x3) {
|
|
dev_err(dev,
|
|
"Failed to identify TAS5086 codec (got %02x)\n", i);
|
|
ret = -ENODEV;
|
|
}
|
|
|
|
/*
|
|
* The chip has been identified, so we can turn off the power
|
|
* again until the dai link is set up.
|
|
*/
|
|
regulator_bulk_disable(ARRAY_SIZE(priv->supplies), priv->supplies);
|
|
|
|
if (ret == 0)
|
|
ret = snd_soc_register_codec(&i2c->dev, &soc_codec_dev_tas5086,
|
|
&tas5086_dai, 1);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int tas5086_i2c_remove(struct i2c_client *i2c)
|
|
{
|
|
snd_soc_unregister_codec(&i2c->dev);
|
|
return 0;
|
|
}
|
|
|
|
static struct i2c_driver tas5086_i2c_driver = {
|
|
.driver = {
|
|
.name = "tas5086",
|
|
.of_match_table = of_match_ptr(tas5086_dt_ids),
|
|
},
|
|
.id_table = tas5086_i2c_id,
|
|
.probe = tas5086_i2c_probe,
|
|
.remove = tas5086_i2c_remove,
|
|
};
|
|
|
|
module_i2c_driver(tas5086_i2c_driver);
|
|
|
|
MODULE_AUTHOR("Daniel Mack <zonque@gmail.com>");
|
|
MODULE_DESCRIPTION("Texas Instruments TAS5086 ALSA SoC Codec Driver");
|
|
MODULE_LICENSE("GPL");
|