331 lines
8.2 KiB
C
331 lines
8.2 KiB
C
/* SPDX-License-Identifier: GPL-2.0-only */
|
|
/*
|
|
* TI LP8788 MFD Device
|
|
*
|
|
* Copyright 2012 Texas Instruments
|
|
*
|
|
* Author: Milo(Woogyom) Kim <milo.kim@ti.com>
|
|
*/
|
|
|
|
#ifndef __MFD_LP8788_H__
|
|
#define __MFD_LP8788_H__
|
|
|
|
#include <linux/gpio.h>
|
|
#include <linux/irqdomain.h>
|
|
#include <linux/pwm.h>
|
|
#include <linux/regmap.h>
|
|
|
|
#define LP8788_DEV_BUCK "lp8788-buck"
|
|
#define LP8788_DEV_DLDO "lp8788-dldo"
|
|
#define LP8788_DEV_ALDO "lp8788-aldo"
|
|
#define LP8788_DEV_CHARGER "lp8788-charger"
|
|
#define LP8788_DEV_RTC "lp8788-rtc"
|
|
#define LP8788_DEV_BACKLIGHT "lp8788-backlight"
|
|
#define LP8788_DEV_VIBRATOR "lp8788-vibrator"
|
|
#define LP8788_DEV_KEYLED "lp8788-keyled"
|
|
#define LP8788_DEV_ADC "lp8788-adc"
|
|
|
|
#define LP8788_NUM_BUCKS 4
|
|
#define LP8788_NUM_DLDOS 12
|
|
#define LP8788_NUM_ALDOS 10
|
|
#define LP8788_NUM_BUCK2_DVS 2
|
|
|
|
#define LP8788_CHG_IRQ "CHG_IRQ"
|
|
#define LP8788_PRSW_IRQ "PRSW_IRQ"
|
|
#define LP8788_BATT_IRQ "BATT_IRQ"
|
|
#define LP8788_ALM_IRQ "ALARM_IRQ"
|
|
|
|
enum lp8788_int_id {
|
|
/* interrup register 1 : Addr 00h */
|
|
LP8788_INT_TSDL,
|
|
LP8788_INT_TSDH,
|
|
LP8788_INT_UVLO,
|
|
LP8788_INT_FLAGMON,
|
|
LP8788_INT_PWRON_TIME,
|
|
LP8788_INT_PWRON,
|
|
LP8788_INT_COMP1,
|
|
LP8788_INT_COMP2,
|
|
|
|
/* interrupt register 2 : Addr 01h */
|
|
LP8788_INT_CHG_INPUT_STATE,
|
|
LP8788_INT_CHG_STATE,
|
|
LP8788_INT_EOC,
|
|
LP8788_INT_CHG_RESTART,
|
|
LP8788_INT_RESTART_TIMEOUT,
|
|
LP8788_INT_FULLCHG_TIMEOUT,
|
|
LP8788_INT_PRECHG_TIMEOUT,
|
|
|
|
/* interrupt register 3 : Addr 02h */
|
|
LP8788_INT_RTC_ALARM1 = 17,
|
|
LP8788_INT_RTC_ALARM2,
|
|
LP8788_INT_ENTER_SYS_SUPPORT,
|
|
LP8788_INT_EXIT_SYS_SUPPORT,
|
|
LP8788_INT_BATT_LOW,
|
|
LP8788_INT_NO_BATT,
|
|
|
|
LP8788_INT_MAX = 24,
|
|
};
|
|
|
|
enum lp8788_dvs_sel {
|
|
DVS_SEL_V0,
|
|
DVS_SEL_V1,
|
|
DVS_SEL_V2,
|
|
DVS_SEL_V3,
|
|
};
|
|
|
|
enum lp8788_ext_ldo_en_id {
|
|
EN_ALDO1,
|
|
EN_ALDO234,
|
|
EN_ALDO5,
|
|
EN_ALDO7,
|
|
EN_DLDO7,
|
|
EN_DLDO911,
|
|
EN_LDOS_MAX,
|
|
};
|
|
|
|
enum lp8788_charger_event {
|
|
NO_CHARGER,
|
|
CHARGER_DETECTED,
|
|
};
|
|
|
|
enum lp8788_bl_ctrl_mode {
|
|
LP8788_BL_REGISTER_ONLY,
|
|
LP8788_BL_COMB_PWM_BASED, /* PWM + I2C, changed by PWM input */
|
|
LP8788_BL_COMB_REGISTER_BASED, /* PWM + I2C, changed by I2C */
|
|
};
|
|
|
|
enum lp8788_bl_dim_mode {
|
|
LP8788_DIM_EXPONENTIAL,
|
|
LP8788_DIM_LINEAR,
|
|
};
|
|
|
|
enum lp8788_bl_full_scale_current {
|
|
LP8788_FULLSCALE_5000uA,
|
|
LP8788_FULLSCALE_8500uA,
|
|
LP8788_FULLSCALE_1200uA,
|
|
LP8788_FULLSCALE_1550uA,
|
|
LP8788_FULLSCALE_1900uA,
|
|
LP8788_FULLSCALE_2250uA,
|
|
LP8788_FULLSCALE_2600uA,
|
|
LP8788_FULLSCALE_2950uA,
|
|
};
|
|
|
|
enum lp8788_bl_ramp_step {
|
|
LP8788_RAMP_8us,
|
|
LP8788_RAMP_1024us,
|
|
LP8788_RAMP_2048us,
|
|
LP8788_RAMP_4096us,
|
|
LP8788_RAMP_8192us,
|
|
LP8788_RAMP_16384us,
|
|
LP8788_RAMP_32768us,
|
|
LP8788_RAMP_65538us,
|
|
};
|
|
|
|
enum lp8788_isink_scale {
|
|
LP8788_ISINK_SCALE_100mA,
|
|
LP8788_ISINK_SCALE_120mA,
|
|
};
|
|
|
|
enum lp8788_isink_number {
|
|
LP8788_ISINK_1,
|
|
LP8788_ISINK_2,
|
|
LP8788_ISINK_3,
|
|
};
|
|
|
|
enum lp8788_alarm_sel {
|
|
LP8788_ALARM_1,
|
|
LP8788_ALARM_2,
|
|
LP8788_ALARM_MAX,
|
|
};
|
|
|
|
enum lp8788_adc_id {
|
|
LPADC_VBATT_5P5,
|
|
LPADC_VIN_CHG,
|
|
LPADC_IBATT,
|
|
LPADC_IC_TEMP,
|
|
LPADC_VBATT_6P0,
|
|
LPADC_VBATT_5P0,
|
|
LPADC_ADC1,
|
|
LPADC_ADC2,
|
|
LPADC_VDD,
|
|
LPADC_VCOIN,
|
|
LPADC_VDD_LDO,
|
|
LPADC_ADC3,
|
|
LPADC_ADC4,
|
|
LPADC_MAX,
|
|
};
|
|
|
|
struct lp8788;
|
|
|
|
/*
|
|
* lp8788_buck1_dvs
|
|
* @gpio : gpio pin number for dvs control
|
|
* @vsel : dvs selector for buck v1 register
|
|
*/
|
|
struct lp8788_buck1_dvs {
|
|
int gpio;
|
|
enum lp8788_dvs_sel vsel;
|
|
};
|
|
|
|
/*
|
|
* lp8788_buck2_dvs
|
|
* @gpio : two gpio pin numbers are used for dvs
|
|
* @vsel : dvs selector for buck v2 register
|
|
*/
|
|
struct lp8788_buck2_dvs {
|
|
int gpio[LP8788_NUM_BUCK2_DVS];
|
|
enum lp8788_dvs_sel vsel;
|
|
};
|
|
|
|
/*
|
|
* struct lp8788_chg_param
|
|
* @addr : charging control register address (range : 0x11 ~ 0x1C)
|
|
* @val : charging parameter value
|
|
*/
|
|
struct lp8788_chg_param {
|
|
u8 addr;
|
|
u8 val;
|
|
};
|
|
|
|
/*
|
|
* struct lp8788_charger_platform_data
|
|
* @adc_vbatt : adc channel name for battery voltage
|
|
* @adc_batt_temp : adc channel name for battery temperature
|
|
* @max_vbatt_mv : used for calculating battery capacity
|
|
* @chg_params : initial charging parameters
|
|
* @num_chg_params : numbers of charging parameters
|
|
* @charger_event : the charger event can be reported to the platform side
|
|
*/
|
|
struct lp8788_charger_platform_data {
|
|
const char *adc_vbatt;
|
|
const char *adc_batt_temp;
|
|
unsigned int max_vbatt_mv;
|
|
struct lp8788_chg_param *chg_params;
|
|
int num_chg_params;
|
|
void (*charger_event) (struct lp8788 *lp,
|
|
enum lp8788_charger_event event);
|
|
};
|
|
|
|
/*
|
|
* struct lp8788_backlight_platform_data
|
|
* @name : backlight driver name. (default: "lcd-backlight")
|
|
* @initial_brightness : initial value of backlight brightness
|
|
* @bl_mode : brightness control by pwm or lp8788 register
|
|
* @dim_mode : dimming mode selection
|
|
* @full_scale : full scale current setting
|
|
* @rise_time : brightness ramp up step time
|
|
* @fall_time : brightness ramp down step time
|
|
* @pwm_pol : pwm polarity setting when bl_mode is pwm based
|
|
* @period_ns : platform specific pwm period value. unit is nano.
|
|
Only valid when bl_mode is LP8788_BL_COMB_PWM_BASED
|
|
*/
|
|
struct lp8788_backlight_platform_data {
|
|
char *name;
|
|
int initial_brightness;
|
|
enum lp8788_bl_ctrl_mode bl_mode;
|
|
enum lp8788_bl_dim_mode dim_mode;
|
|
enum lp8788_bl_full_scale_current full_scale;
|
|
enum lp8788_bl_ramp_step rise_time;
|
|
enum lp8788_bl_ramp_step fall_time;
|
|
enum pwm_polarity pwm_pol;
|
|
unsigned int period_ns;
|
|
};
|
|
|
|
/*
|
|
* struct lp8788_led_platform_data
|
|
* @name : led driver name. (default: "keyboard-backlight")
|
|
* @scale : current scale
|
|
* @num : current sink number
|
|
* @iout_code : current output value (Addr 9Ah ~ 9Bh)
|
|
*/
|
|
struct lp8788_led_platform_data {
|
|
char *name;
|
|
enum lp8788_isink_scale scale;
|
|
enum lp8788_isink_number num;
|
|
int iout_code;
|
|
};
|
|
|
|
/*
|
|
* struct lp8788_vib_platform_data
|
|
* @name : vibrator driver name
|
|
* @scale : current scale
|
|
* @num : current sink number
|
|
* @iout_code : current output value (Addr 9Ah ~ 9Bh)
|
|
* @pwm_code : PWM code value (Addr 9Ch ~ 9Eh)
|
|
*/
|
|
struct lp8788_vib_platform_data {
|
|
char *name;
|
|
enum lp8788_isink_scale scale;
|
|
enum lp8788_isink_number num;
|
|
int iout_code;
|
|
int pwm_code;
|
|
};
|
|
|
|
/*
|
|
* struct lp8788_platform_data
|
|
* @init_func : used for initializing registers
|
|
* before mfd driver is registered
|
|
* @buck_data : regulator initial data for buck
|
|
* @dldo_data : regulator initial data for digital ldo
|
|
* @aldo_data : regulator initial data for analog ldo
|
|
* @buck1_dvs : gpio configurations for buck1 dvs
|
|
* @buck2_dvs : gpio configurations for buck2 dvs
|
|
* @chg_pdata : platform data for charger driver
|
|
* @alarm_sel : rtc alarm selection (1 or 2)
|
|
* @bl_pdata : configurable data for backlight driver
|
|
* @led_pdata : configurable data for led driver
|
|
* @vib_pdata : configurable data for vibrator driver
|
|
* @adc_pdata : iio map data for adc driver
|
|
*/
|
|
struct lp8788_platform_data {
|
|
/* general system information */
|
|
int (*init_func) (struct lp8788 *lp);
|
|
|
|
/* regulators */
|
|
struct regulator_init_data *buck_data[LP8788_NUM_BUCKS];
|
|
struct regulator_init_data *dldo_data[LP8788_NUM_DLDOS];
|
|
struct regulator_init_data *aldo_data[LP8788_NUM_ALDOS];
|
|
struct lp8788_buck1_dvs *buck1_dvs;
|
|
struct lp8788_buck2_dvs *buck2_dvs;
|
|
|
|
/* charger */
|
|
struct lp8788_charger_platform_data *chg_pdata;
|
|
|
|
/* rtc alarm */
|
|
enum lp8788_alarm_sel alarm_sel;
|
|
|
|
/* backlight */
|
|
struct lp8788_backlight_platform_data *bl_pdata;
|
|
|
|
/* current sinks */
|
|
struct lp8788_led_platform_data *led_pdata;
|
|
struct lp8788_vib_platform_data *vib_pdata;
|
|
|
|
/* adc iio map data */
|
|
struct iio_map *adc_pdata;
|
|
};
|
|
|
|
/*
|
|
* struct lp8788
|
|
* @dev : parent device pointer
|
|
* @regmap : used for i2c communcation on accessing registers
|
|
* @irqdm : interrupt domain for handling nested interrupt
|
|
* @irq : pin number of IRQ_N
|
|
* @pdata : lp8788 platform specific data
|
|
*/
|
|
struct lp8788 {
|
|
struct device *dev;
|
|
struct regmap *regmap;
|
|
struct irq_domain *irqdm;
|
|
int irq;
|
|
struct lp8788_platform_data *pdata;
|
|
};
|
|
|
|
int lp8788_irq_init(struct lp8788 *lp, int chip_irq);
|
|
void lp8788_irq_exit(struct lp8788 *lp);
|
|
int lp8788_read_byte(struct lp8788 *lp, u8 reg, u8 *data);
|
|
int lp8788_read_multi_bytes(struct lp8788 *lp, u8 reg, u8 *data, size_t count);
|
|
int lp8788_write_byte(struct lp8788 *lp, u8 reg, u8 data);
|
|
int lp8788_update_bits(struct lp8788 *lp, u8 reg, u8 mask, u8 data);
|
|
#endif
|