Javier Martinez Canillas 934f1f4833 mmc: pwrseq_simple: Extend to support more pins ... Many WLAN attached to a SDIO/MMC interface, needs more than one pin for their reset sequence. For example, is very common for chips to have two pins: one for reset and one for power enable. This patch adds support for more reset pins to the pwrseq_simple driver and instead hardcoding a fixed number, it uses the of_gpio_named_count() since the MMC power sequence is only built when CONFIG_OF is enabled. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>		2015-01-30 12:00:27 +01:00
..
Kconfig	mmc: core: Use MMC_UNSAFE_RESUME as default behavior	2014-02-13 22:58:15 -05:00
Makefile	mmc: pwrseq: Initial support for the simple MMC power sequence provider	2015-01-28 12:32:07 +01:00
bus.c	mmc: Add SDIO function devicetree subnode parsing	2015-01-19 09:56:26 +01:00
bus.h	mmc: rename dev_to_mmc_card() to mmc_dev_to_card()	2010-10-23 21:11:12 +08:00
core.c	mmc: Resolve BKOPS compatability issue	2015-01-29 11:15:12 +01:00
core.h	mmc: core: Simplify by adding mmc_execute_tuning()	2015-01-19 09:56:30 +01:00
debugfs.c	mmc: core: Use mmc_get_ext_csd() instead of mmc_send_ext_csd()	2014-11-10 12:40:44 +01:00
host.c	mmc: core: Initial support for MMC power sequences	2015-01-28 12:31:12 +01:00
host.h	mmc: start removing enable / disable API	2012-03-27 12:20:03 -04:00
mmc.c	mmc: Resolve BKOPS compatability issue	2015-01-29 11:15:12 +01:00
mmc_ops.c	mmc: core: Make tuning block patterns static	2015-01-19 09:56:24 +01:00
mmc_ops.h	mmc: core: Add helper function for EXT_CSD support	2014-11-10 12:40:41 +01:00
pwrseq.c	mmc: pwrseq: Initial support for the simple MMC power sequence provider	2015-01-28 12:32:07 +01:00
pwrseq.h	mmc: pwrseq: Initial support for the simple MMC power sequence provider	2015-01-28 12:32:07 +01:00
pwrseq_simple.c	mmc: pwrseq_simple: Extend to support more pins	2015-01-30 12:00:27 +01:00
quirks.c	mmc: quirks: Fixup debug message	2014-07-09 11:26:03 +02:00
sd.c	mmc: core: Simplify by adding mmc_execute_tuning()	2015-01-19 09:56:30 +01:00
sd.h	mmc: drop the speed mode of card's state	2014-05-12 18:05:53 -04:00
sd_ops.c	mmc: sd: warn if card stays busy during init	2014-07-09 11:26:07 +02:00
sd_ops.h	mmc: add erase, secure erase, trim and secure trim operations	2010-08-12 08:43:30 -07:00
sdio.c	mmc: core: Simplify by adding mmc_execute_tuning()	2015-01-19 09:56:30 +01:00
sdio_bus.c	mmc: Add SDIO function devicetree subnode parsing	2015-01-19 09:56:26 +01:00
sdio_bus.h	mmc: basic SDIO device model	2007-09-23 19:45:31 +02:00
sdio_cis.c	mmc: sdio: Change pr_warning to pr_warn_ratelimited	2012-07-22 15:25:48 -04:00
sdio_cis.h	sdio: split up common and function CIS parsing	2007-09-23 20:44:22 +02:00
sdio_io.c	mmc: sdio: Use multiple scatter/gather list	2012-12-06 13:54:43 -05:00
sdio_irq.c	mmc: Convert pr_warning to pr_warn	2014-09-24 10:13:09 +02:00
sdio_ops.c	mmc: sdio: Use multiple scatter/gather list	2012-12-06 13:54:43 -05:00
sdio_ops.h	sdio: recognize io card without powercycle	2010-03-12 15:52:28 -08:00
slot-gpio.c	mmc: slot-gpio: Allow host driver to provide isr for card-detect interrupts	2015-01-19 09:56:29 +01:00
slot-gpio.h	mmc: slot-gpio: Make mmc_gpio_alloc() available for MMC core	2015-01-19 09:56:17 +01:00