linux-sg2042/arch/mips/pci/fixup-fuloong2e.c

226 lines
5.9 KiB
C

/*
* Copyright (C) 2004 ICT CAS
* Author: Li xiaoyu, ICT CAS
* lixy@ict.ac.cn
*
* Copyright (C) 2007 Lemote, Inc. & Institute of Computing Technology
* Author: Fuxin Zhang, zhangfx@lemote.com
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/init.h>
#include <linux/pci.h>
#include <loongson.h>
/* South bridge slot number is set by the pci probe process */
static u8 sb_slot = 5;
int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
int irq = 0;
if (slot == sb_slot) {
switch (PCI_FUNC(dev->devfn)) {
case 2:
irq = 10;
break;
case 3:
irq = 11;
break;
case 5:
irq = 9;
break;
}
} else {
irq = LOONGSON_IRQ_BASE + 25 + pin;
}
return irq;
}
/* Do platform specific device initialization at pci_enable_device() time */
int pcibios_plat_dev_init(struct pci_dev *dev)
{
return 0;
}
static void __init loongson2e_nec_fixup(struct pci_dev *pdev)
{
unsigned int val;
/* Configures port 1, 2, 3, 4 to be validate*/
pci_read_config_dword(pdev, 0xe0, &val);
pci_write_config_dword(pdev, 0xe0, (val & ~7) | 0x4);
/* System clock is 48-MHz Oscillator. */
pci_write_config_dword(pdev, 0xe4, 1 << 5);
}
static void __init loongson2e_686b_func0_fixup(struct pci_dev *pdev)
{
unsigned char c;
sb_slot = PCI_SLOT(pdev->devfn);
printk(KERN_INFO "via686b fix: ISA bridge\n");
/* Enable I/O Recovery time */
pci_write_config_byte(pdev, 0x40, 0x08);
/* Enable ISA refresh */
pci_write_config_byte(pdev, 0x41, 0x01);
/* disable ISA line buffer */
pci_write_config_byte(pdev, 0x45, 0x00);
/* Gate INTR, and flush line buffer */
pci_write_config_byte(pdev, 0x46, 0xe0);
/* Disable PCI Delay Transaction, Enable EISA ports 4D0/4D1. */
/* pci_write_config_byte(pdev, 0x47, 0x20); */
/*
* enable PCI Delay Transaction, Enable EISA ports 4D0/4D1.
* enable time-out timer
*/
pci_write_config_byte(pdev, 0x47, 0xe6);
/*
* enable level trigger on pci irqs: 9,10,11,13
* important! without this PCI interrupts won't work
*/
outb(0x2e, 0x4d1);
/* 512 K PCI Decode */
pci_write_config_byte(pdev, 0x48, 0x01);
/* Wait for PGNT before grant to ISA Master/DMA */
pci_write_config_byte(pdev, 0x4a, 0x84);
/*
* Plug'n'Play
*
* Parallel DRQ 3, Floppy DRQ 2 (default)
*/
pci_write_config_byte(pdev, 0x50, 0x0e);
/*
* IRQ Routing for Floppy and Parallel port
*
* IRQ 6 for floppy, IRQ 7 for parallel port
*/
pci_write_config_byte(pdev, 0x51, 0x76);
/* IRQ Routing for serial ports (take IRQ 3 and 4) */
pci_write_config_byte(pdev, 0x52, 0x34);
/* All IRQ's level triggered. */
pci_write_config_byte(pdev, 0x54, 0x00);
/* route PIRQA-D irq */
pci_write_config_byte(pdev, 0x55, 0x90); /* bit 7-4, PIRQA */
pci_write_config_byte(pdev, 0x56, 0xba); /* bit 7-4, PIRQC; */
/* 3-0, PIRQB */
pci_write_config_byte(pdev, 0x57, 0xd0); /* bit 7-4, PIRQD */
/* enable function 5/6, audio/modem */
pci_read_config_byte(pdev, 0x85, &c);
c &= ~(0x3 << 2);
pci_write_config_byte(pdev, 0x85, c);
printk(KERN_INFO"via686b fix: ISA bridge done\n");
}
static void __init loongson2e_686b_func1_fixup(struct pci_dev *pdev)
{
printk(KERN_INFO"via686b fix: IDE\n");
/* Modify IDE controller setup */
pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 48);
pci_write_config_byte(pdev, PCI_COMMAND,
PCI_COMMAND_IO | PCI_COMMAND_MEMORY |
PCI_COMMAND_MASTER);
pci_write_config_byte(pdev, 0x40, 0x0b);
/* legacy mode */
pci_write_config_byte(pdev, 0x42, 0x09);
#if 1/* play safe, otherwise we may see notebook's usb keyboard lockup */
/* disable read prefetch/write post buffers */
pci_write_config_byte(pdev, 0x41, 0x02);
/* use 3/4 as fifo thresh hold */
pci_write_config_byte(pdev, 0x43, 0x0a);
pci_write_config_byte(pdev, 0x44, 0x00);
pci_write_config_byte(pdev, 0x45, 0x00);
#else
pci_write_config_byte(pdev, 0x41, 0xc2);
pci_write_config_byte(pdev, 0x43, 0x35);
pci_write_config_byte(pdev, 0x44, 0x1c);
pci_write_config_byte(pdev, 0x45, 0x10);
#endif
printk(KERN_INFO"via686b fix: IDE done\n");
}
static void __init loongson2e_686b_func2_fixup(struct pci_dev *pdev)
{
/* irq routing */
pci_write_config_byte(pdev, PCI_INTERRUPT_LINE, 10);
}
static void __init loongson2e_686b_func3_fixup(struct pci_dev *pdev)
{
/* irq routing */
pci_write_config_byte(pdev, PCI_INTERRUPT_LINE, 11);
}
static void __init loongson2e_686b_func5_fixup(struct pci_dev *pdev)
{
unsigned int val;
unsigned char c;
/* enable IO */
pci_write_config_byte(pdev, PCI_COMMAND,
PCI_COMMAND_IO | PCI_COMMAND_MEMORY |
PCI_COMMAND_MASTER);
pci_read_config_dword(pdev, 0x4, &val);
pci_write_config_dword(pdev, 0x4, val | 1);
/* route ac97 IRQ */
pci_write_config_byte(pdev, 0x3c, 9);
pci_read_config_byte(pdev, 0x8, &c);
/* link control: enable link & SGD PCM output */
pci_write_config_byte(pdev, 0x41, 0xcc);
/* disable game port, FM, midi, sb, enable write to reg2c-2f */
pci_write_config_byte(pdev, 0x42, 0x20);
/* we are using Avance logic codec */
pci_write_config_word(pdev, 0x2c, 0x1005);
pci_write_config_word(pdev, 0x2e, 0x4710);
pci_read_config_dword(pdev, 0x2c, &val);
pci_write_config_byte(pdev, 0x42, 0x0);
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686,
loongson2e_686b_func0_fixup);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_1,
loongson2e_686b_func1_fixup);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_2,
loongson2e_686b_func2_fixup);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_3,
loongson2e_686b_func3_fixup);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_5,
loongson2e_686b_func5_fixup);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_USB,
loongson2e_nec_fixup);