linux-sg2042/arch/mips/ath79
Alan Stern c73cee717e USB: EHCI: remove ehci_port_power() routine
This patch (as1623) removes the ehci_port_power() routine and all the
places that call it.  There's no reason for ehci-hcd to change the
port power settings; the hub driver takes care of all that stuff.

There is one exception: When the controller is resumed from
hibernation or following a loss of power, the ports that are supposed
to be handed over to a companion controller must be powered on first.
Otherwise the handover won't work.  This process is not visible to the
hub driver, so it has to be handled in ehci-hcd.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-31 12:48:07 -07:00
..
Kconfig MIPS: ath79: add initial support for the Atheros DB120 board 2012-05-15 17:49:11 +02:00
Makefile MIPS: ath79: add initial support for the Atheros DB120 board 2012-05-15 17:49:11 +02:00
Platform
clock.c MIPS: ath79: Fix CPU/DDR frequency calculation for SRIF PLLs 2012-10-01 11:37:15 +02:00
common.c MIPS: ath79: add AR934X specific glue to ath79_device_reset_{clear,set} 2012-05-15 17:49:09 +02:00
common.h MIPS: ath79: add GPIOLIB support 2011-01-18 19:30:25 +01:00
dev-common.c MIPS: ath79: register UART device for AR934X SoCs 2012-05-15 17:49:10 +02:00
dev-common.h MIPS: ath79: add common watchdog device 2011-01-18 19:30:26 +01:00
dev-gpio-buttons.c MIPS: ath79: Use kmemdup rather than duplicating its implementation 2012-05-15 17:49:00 +02:00
dev-gpio-buttons.h MIPS: ath79: add common GPIO buttons device 2011-01-18 19:30:27 +01:00
dev-leds-gpio.c MIPS: ath79: Use kmemdup rather than duplicating its implementation 2012-05-15 17:49:00 +02:00
dev-leds-gpio.h MIPS: ath79: add common GPIO LEDs device 2011-01-18 19:30:26 +01:00
dev-spi.c MIPS: ath79: add common SPI controller device 2011-01-18 19:30:27 +01:00
dev-spi.h MIPS: ath79: add common SPI controller device 2011-01-18 19:30:27 +01:00
dev-usb.c USB: EHCI: remove ehci_port_power() routine 2012-10-31 12:48:07 -07:00
dev-usb.h MIPS: ath79: add common USB Host Controller device 2011-12-07 22:02:44 +00:00
dev-wmac.c MIPS: ath79: add WMAC registration code for AR934X 2012-05-15 17:49:10 +02:00
dev-wmac.h MIPS: ath79: Rename dev-ar913x-wmac.h to dev-wmac.h 2011-12-07 22:02:48 +00:00
early_printk.c MIPS: ath79: add early_printk support for AR934X 2012-05-15 17:49:07 +02:00
gpio.c MIPS: ath79: Fix number of GPIO lines for AR724[12] 2012-08-17 10:57:26 +02:00
irq.c MIPS: ath79: add IRQ handling code for AR934X 2012-05-15 17:49:09 +02:00
mach-ap81.c MIPS: ath79: Rename dev-ar913x-wmac.h to dev-wmac.h 2011-12-07 22:02:48 +00:00
mach-ap121.c MIPS: ath79: Rename dev-ar913x-wmac.h to dev-wmac.h 2011-12-07 22:02:48 +00:00
mach-db120.c MIPS: ath79: register USB host controller on the DB120 board 2012-08-28 12:29:57 +02:00
mach-pb44.c MIPS: ath79: register PCI controller on the PB44 board 2012-05-15 17:49:06 +02:00
mach-ubnt-xm.c MIPS: ath79: remove ar724x_pci_add_data function 2012-05-15 17:49:06 +02:00
machtypes.h MIPS: ath79: add initial support for the Atheros DB120 board 2012-05-15 17:49:11 +02:00
pci.c MIPS: ath79: add PCI registration code for AR934X 2012-05-15 17:49:11 +02:00
pci.h MIPS: ath79: update copyright headers of PCI related files 2012-05-15 17:49:07 +02:00
prom.c
setup.c MIPS: ath79: add SoC detection code for AR934X 2012-05-15 17:49:07 +02:00