linux-sg2042/drivers/iio
Greg Kroah-Hartman ec94efcdad The usual mixed bag of fixes for IIO in the 4.1 cycle.
Second version of this pull request as a small fix to a fix turned
 up before Greg pulled it for a cc10001 patch near the top of the tree.
 
 One core fix
 
 * Set updated for a iio kfifo was incorrectly set to false during a failed
   update, resulting in atttempts to repeat the failed operation appearing
   to succeed.
 
 This time I've decided to list the driver fixes in alphabetical order rather
 than 'randomly'.
 
 * axp288_adc - a recent change added a check for valid info masks when
   reading channels from consumer drivers.
 * bmp280 - temperature compensation was failing to read the tfine value, hence
   causing a temperature of 0 to always be returned and incorrect presure
   measurements.
 * cc10001 - Fix channel number mapping when some channels are reserved for
   remote CPUs. Fix an issue with the use of the power-up/power-down register
   (basically wrong polarity). Fix an issue due to the missinterpretting the
   return value from regulator_get_voltage. Add a delay before the start bit
   as recommended for the hardware to avoid data corruption.
 * hid pressure - fix channel spec of modfiied, but no modifier (which makes no
   sense!)
 * hid proximity - fix channel spec of modified, but no modifier (which makes
   no sense!). Fix a memory leak in the probe function.
 * mcp320x - occasional incorrect readings on dma using spi busses due to
   cacheline corruption. Fixed by forcing ___cacheline_aligned for the buffers.
 * mma9551 - buffer overrun fix (miss specified maximum length of buffers)
 * mma9553 - endian fix on status message. Add an enable element for activity
   channel. Input checking for activity period to avoid rather unpredictable
   results.
 * spmi-vadc - fix an overflow in the output value normalization seen on some
   boards.
 * st-snesors - oops due to use of a mutex that is not yet initialized during
   probe.
 * xilinx adc - Some wrong register addresses, a wrong address for vccaux
   channel, incorrect scale on VREFP and incorrect sign on VREFN.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJVUllEAAoJEFSFNJnE9BaIq7MP/1BLv6u7MWh1FITay4aBSR16
 o8x7fmqbXoVSNz44cU3aZ//MJOfGNZQM220iA+e01PjmS3Jqr3HxSBLI/XosVEq8
 om40h7/esiYWP61u8yZeSXr74K25dUpaz9c4Zl+/2BRYlUAPEh3b9DraXN9dE8Rs
 u0AoGnYxnPAAYEbNUinKQLDw2BoQoTBX3QgRPNJsWL2BapAAyg9JNxm7JMKJateb
 dMP0LyJ7puVqfeDLb2XzNq8eaMbBrRMIj7LNJGOO8EvzCZEC029kSWlGUAgeXYgW
 XJdj0WZ8fmYw8OVzvgci5ODVS7RXqb22j2hjA2cx/20tFDt2WjGaQAwbQckWmVJx
 cZXzPY89wvqm5jpEey79GSAP8rx7PGy7SxFl0zmuqrdXte81W7ArvGwERJBQgEWa
 VR7WA3MnJjPQtyRRC0Y/6jwe+SdbmM50JmRzB7ApMf3G3sbAdEFp0rcNe181+S9V
 AmQK4OyBP9xVgnlNlglAKeDgNuG7w/2Bp8TFXaDX+1JQP4eM1GmoDyje4/x9WOsx
 hH+Ord9Vbyy8UjFq5tHS3444bmg8mYtYnWIH7+8XImvwhhyzDx82MVkqX2S37n+T
 tMQA04ntt/r68i6KsKVGP8QFftSNJcnFxXUMr4SPigomdaooe0v6Vl7w82kxFL5o
 Im6bayZ29fOuJWJ2Rslb
 =PiG+
 -----END PGP SIGNATURE-----

Merge tag 'iio-fixes-for-4.1a-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus

Jonathan writes:

The usual mixed bag of fixes for IIO in the 4.1 cycle.

Second version of this pull request as a small fix to a fix turned
up before Greg pulled it for a cc10001 patch near the top of the tree.

One core fix

* Set updated for a iio kfifo was incorrectly set to false during a failed
  update, resulting in atttempts to repeat the failed operation appearing
  to succeed.

This time I've decided to list the driver fixes in alphabetical order rather
than 'randomly'.

* axp288_adc - a recent change added a check for valid info masks when
  reading channels from consumer drivers.
* bmp280 - temperature compensation was failing to read the tfine value, hence
  causing a temperature of 0 to always be returned and incorrect presure
  measurements.
* cc10001 - Fix channel number mapping when some channels are reserved for
  remote CPUs. Fix an issue with the use of the power-up/power-down register
  (basically wrong polarity). Fix an issue due to the missinterpretting the
  return value from regulator_get_voltage. Add a delay before the start bit
  as recommended for the hardware to avoid data corruption.
* hid pressure - fix channel spec of modfiied, but no modifier (which makes no
  sense!)
* hid proximity - fix channel spec of modified, but no modifier (which makes
  no sense!). Fix a memory leak in the probe function.
* mcp320x - occasional incorrect readings on dma using spi busses due to
  cacheline corruption. Fixed by forcing ___cacheline_aligned for the buffers.
* mma9551 - buffer overrun fix (miss specified maximum length of buffers)
* mma9553 - endian fix on status message. Add an enable element for activity
  channel. Input checking for activity period to avoid rather unpredictable
  results.
* spmi-vadc - fix an overflow in the output value normalization seen on some
  boards.
* st-snesors - oops due to use of a mutex that is not yet initialized during
  probe.
* xilinx adc - Some wrong register addresses, a wrong address for vccaux
  channel, incorrect scale on VREFP and incorrect sign on VREFN.
2015-05-13 11:51:14 -07:00
..
accel The usual mixed bag of fixes for IIO in the 4.1 cycle. 2015-05-13 11:51:14 -07:00
adc The usual mixed bag of fixes for IIO in the 4.1 cycle. 2015-05-13 11:51:14 -07:00
amplifiers iio: amplifiers: ad8366: Use right order for type specification 2015-01-01 12:16:57 +00:00
common The usual mixed bag of fixes for IIO in the 4.1 cycle. 2015-05-13 11:51:14 -07:00
dac iio: max517: Add support for MAX520 and MAX521 chips. 2015-03-28 10:57:34 +00:00
frequency iio: frequency: ad9523: Increase sleep time in ad9523_store_eeprom 2015-01-01 12:18:26 +00:00
gyro The usual mixed bag of fixes for IIO in the 4.1 cycle. 2015-05-13 11:51:14 -07:00
humidity IIO: si7020: Allocate correct amount of memory in devm_iio_device_alloc 2015-02-14 11:35:12 +00:00
imu Merge 4.0-rc7 into staging-next 2015-04-07 11:03:02 +02:00
light The usual mixed bag of fixes for IIO in the 4.1 cycle. 2015-05-13 11:51:14 -07:00
magnetometer The usual mixed bag of fixes for IIO in the 4.1 cycle. 2015-05-13 11:51:14 -07:00
orientation Merge branch 'for-4.1/sensor-hub' into for-linus 2015-04-13 23:43:34 +02:00
pressure The usual mixed bag of fixes for IIO in the 4.1 cycle. 2015-05-13 11:51:14 -07:00
proximity Merge 4.0-rc7 into staging-next 2015-04-07 11:03:02 +02:00
temperature iio: mlx90614: Support devices with dual IR sensor 2015-03-29 16:17:12 +01:00
trigger iio: trigger: Add a blank line after declarations 2014-12-26 12:15:36 +00:00
Kconfig Merge branch 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild 2015-02-19 10:36:45 -08:00
Makefile iio: Add AS3935 lightning sensor support 2014-03-16 18:00:32 +00:00
buffer_cb.c iio get rid of unneccessary error_ret 2014-02-18 08:46:36 +00:00
iio_core.h iio: Move buffer registration to the core 2014-12-12 12:28:31 +00:00
iio_core_trigger.h iio: fix semicolon in io_core_trigger.h 2013-08-03 18:40:32 +01:00
industrialio-buffer.c iio: add support for hardware fifo 2015-03-29 16:17:10 +01:00
industrialio-core.c iio: core: Fix double free. 2015-03-14 18:54:14 +00:00
industrialio-event.c iio: core: Fix double free. 2015-03-14 18:54:14 +00:00
industrialio-trigger.c iio: Remove timestamp argument from iio_trigger_poll() and iio_trigger_poll_chained() 2014-06-14 16:25:59 +01:00
industrialio-triggered-buffer.c iio: kfifo: Remove unused argument in iio_kfifo_allocate 2014-12-26 11:20:38 +00:00
inkern.c First round of IIO new drivers, cleanups and functionality for the 3.20 cycle take 2 2015-01-21 10:13:37 +08:00
kfifo_buf.c iio: kfifo: Set update_needed to false only if a buffer was allocated 2015-05-07 23:36:58 +01:00