hollalinux
/
linux-sg2042
mirror of https://github.com/sophgo/linux-riscv.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
linux-sg2042/arch/powerpc/boot
History
York Sun 9b53a9e28a fbdev: powerpc: driver for Freescale 8610 and 5121 DIU 
The following features are supported:
plane 0 works as a regular frame buffer, can be accessed by /dev/fb0
plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2
plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4
Special ioctls support AOIs

All /dev/fb* can be used as regular frame buffer devices, except hardware
change can only be made through /dev/fb0.  Changing pixel clock has no effect
on other fbs.

Limitation of usage of AOIs:
AOIs on the same plane can not be horizonally overlapped
AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1
AOIs can not beyond phisical display area. Application should check AOI geometry
before changing physical resolution on /dev/fb0

required command line parameters to preallocate memory for frame buffer diufb.

optional command line parameters to set modes and monitor
video=fslfb:[resolution][,bpp][,monitor]
Syntax:

Resolution
xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional
eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60

Bpp
bpp=32, bpp=24, or bpp=16

Monitor
monitor=0, monitor=1, monitor=2
0 is DVI
1 is Single link LVDS
2 is Double link LVDS

Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three
monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching
monirot port for MPC5121ADS has no effect.

If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above.

Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Timur Tabi <timur@freescale.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 		2008-04-28 08:58:40 -07:00
..
dtc-src [POWERPC] Update .gitignore files 2008-01-17 14:57:09 +11:00
dts fbdev: powerpc: driver for Freescale 8610 and 5121 DIU 2008-04-28 08:58:40 -07:00
libfdt [POWERPC] Merge libfdt upstream source 2007-12-11 13:46:13 +11:00
.gitignore [POWERPC] Add zImage.iseries to arch/powerpc/boot/.gitignore 2008-04-25 09:48:13 +10:00
4xx.c [POWERPC] 4xx: logical/bitand typo in powerpc/boot/4xx.c 2008-01-25 07:13:39 -06:00
4xx.h [POWERPC] 4xx: Add 405GPr and 405EP support in boot wrapper 2008-01-08 07:58:09 -06:00
44x.h [POWERPC] cuimage for Bamboo board 2007-09-19 21:13:16 -05:00
Makefile [POWERPC] bootwrapper: fix build error on virtex405-head.S 2008-04-24 13:32:47 -05:00
README powerpc: Move ppc64 boot wrapper code over to arch/powerpc 2005-11-16 13:52:21 +11:00
addRamDisk.c powerpc: Move ppc64 boot wrapper code over to arch/powerpc 2005-11-16 13:52:21 +11:00
addnote.c powerpc: Move ppc64 boot wrapper code over to arch/powerpc 2005-11-16 13:52:21 +11:00
bamboo.c [POWERPC] Start removing linux,network-index in favour of aliases 2008-03-26 07:19:16 -05:00
cpm-serial.c [POWERPC] cpm-serial: Relocate CPM buffer descriptors and SMC parameter ram. 2008-04-17 01:01:37 -05:00
crt0.S [POWERPC] Fix building of COFF zImages 2007-06-07 22:21:31 +10:00
cuboot-8xx.c [POWERPC] Use embedded libfdt in the bootwrapper 2007-12-11 13:46:14 +11:00
cuboot-52xx.c [POWERPC] Use embedded libfdt in the bootwrapper 2007-12-11 13:46:14 +11:00
cuboot-83xx.c [POWERPC] bootwrapper: convert cuboot-8{3,5}xx to dt_fixup_mac_address_by_alias 2008-01-23 19:32:47 -06:00
cuboot-85xx-cpm2.c [POWERPC] Add a cuboot wrapper for 85xx with CPM2 2008-01-27 14:10:36 -06:00
cuboot-85xx.c [POWERPC] bootwrapper: convert cuboot-8{3,5}xx to dt_fixup_mac_address_by_alias 2008-01-23 19:32:47 -06:00
cuboot-824x.c [POWERPC] Add initial iomega StorCenter board port. 2008-01-23 19:54:36 -06:00
cuboot-bamboo.c [POWERPC] 4xx: Use correct board info structure in cuboot wrappers 2008-02-28 08:16:27 -06:00
cuboot-ebony.c [POWERPC] 4xx: Use correct board info structure in cuboot wrappers 2008-02-28 08:16:27 -06:00
cuboot-katmai.c [POWERPC] 4xx: Use correct board info structure in cuboot wrappers 2008-02-28 08:16:27 -06:00
cuboot-mpc7448hpc2.c [POWERPC] bootwrapper: Build multiple cuImages 2008-02-07 11:40:19 +11:00
cuboot-pq2.c [POWERPC] cuboot-pq2: PCI fixes 2008-04-17 01:01:40 -05:00
cuboot-rainier.c [POWERPC] Start removing linux,network-index in favour of aliases 2008-03-26 07:19:16 -05:00
cuboot-sequoia.c [POWERPC] Start removing linux,network-index in favour of aliases 2008-03-26 07:19:16 -05:00
cuboot-taishan.c [POWERPC] Start removing linux,network-index in favour of aliases 2008-03-26 07:19:16 -05:00
cuboot-warp.c [POWERPC] Start removing linux,network-index in favour of aliases 2008-03-26 07:19:16 -05:00
cuboot-yosemite.c [POWERPC] 4xx: Add bootwrapper for AMCC Yosemite board 2008-03-26 07:19:17 -05:00
cuboot.c [POWERPC] bootwrapper: Move linker symbols into ops.h 2007-08-22 15:27:28 +10:00
cuboot.h [POWERPC] Consolidate cuboot initialization code 2007-06-14 22:30:16 +10:00
dcr.h [POWERPC] 4xx: Add 405GPr and 405EP support in boot wrapper 2008-01-08 07:58:09 -06:00
devtree.c [POWERPC] Add bootwrapper function to get virtual reg from the device tree. 2008-04-17 01:01:37 -05:00
div64.S powerpc: Move ppc64 boot wrapper code over to arch/powerpc 2005-11-16 13:52:21 +11:00
dummy.c powerpc/32: Generate miboot images with ARCH=powerpc 2006-01-15 13:00:08 +11:00
ebony.c [POWERPC] Start removing linux,network-index in favour of aliases 2008-03-26 07:19:16 -05:00
elf.h [POWERPC] Move bootwrapper ELF parsing routines to a file 2007-04-13 03:55:16 +10:00
elf_util.c [POWERPC] Move bootwrapper ELF parsing routines to a file 2007-04-13 03:55:16 +10:00
ep88xc.c [POWERPC] Use embedded libfdt in the bootwrapper 2007-12-11 13:46:14 +11:00
ep405.c [POWERPC] 4xx: EP405 boards support for arch/powerpc 2007-12-23 13:13:14 -06:00
ep8248e.c [POWERPC] 82xx: Embedded Planet EP8248E support 2008-01-23 19:34:43 -06:00
fixed-head.S [POWERPC] 8xx/wrapper: Embedded Planet EP88xC support 2007-10-04 11:02:40 -05:00
flatdevtree_env.h Fix file references in documentation and Kconfig 2008-01-22 10:43:36 -08:00
fsl-soc.c [POWERPC] bootwrapper: Add fsl_get_immr() and 8xx/pq2 clock functions. 2007-10-03 20:36:35 -05:00
fsl-soc.h [POWERPC] bootwrapper: Add fsl_get_immr() and 8xx/pq2 clock functions. 2007-10-03 20:36:35 -05:00
gunzip_util.c [POWERPC] boot: Simplify gunzip_finish 2007-10-03 11:48:43 +10:00
gunzip_util.h [POWERPC] Add documentation for the zImage's gunzip convenience functions 2007-03-16 16:38:19 +11:00
hack-coff.c powerpc: Make COFF zImages for old 32-bit powermacs 2006-01-14 15:04:06 +11:00
holly.c [POWERPC] Use embedded libfdt in the bootwrapper 2007-12-11 13:46:14 +11:00
install.sh [PATCH] powerpc: trivial: modify comments to refer to new location of files 2006-02-10 16:53:51 +11:00
io.h [POWERPC] bootwrapper: Add 16-bit I/O, sync(), eieio(), and barrier() 2007-08-22 15:21:48 +10:00
libfdt-wrapper.c [POWERPC] Replace remaining __FUNCTION__ occurrences 2008-04-01 20:43:09 +11:00
libfdt_env.h [POWERPC] Use embedded libfdt in the bootwrapper 2007-12-11 13:46:14 +11:00
main.c [POWERPC] Kill flatdevtree.c 2007-12-11 13:46:15 +11:00
mktree.c [POWERPC] Support for the Ebony 440GP reference board in arch/powerpc 2007-05-08 14:47:32 +10:00
mpc8xx.c [POWERPC] bootwrapper: Add fsl_get_immr() and 8xx/pq2 clock functions. 2007-10-03 20:36:35 -05:00
mpc8xx.h [POWERPC] bootwrapper: Add fsl_get_immr() and 8xx/pq2 clock functions. 2007-10-03 20:36:35 -05:00
mpc52xx-psc.c [POWERPC] Add bootwrapper function to get virtual reg from the device tree. 2008-04-17 01:01:37 -05:00
mpsc.c [POWERPC] prpmc2800: Clean up dts properties 2008-04-15 21:21:24 +10:00
mv64x60.c [POWERPC] mv64x60: Remove device tree absolute path references 2008-04-15 21:21:24 +10:00
mv64x60.h [POWERPC] Add bootwrapper support for Marvell/mv64x60 hostbridge 2007-05-12 11:32:49 +10:00
mv64x60_i2c.c [POWERPC] mv64x60: Remove device tree absolute path references 2008-04-15 21:21:24 +10:00
ns16550.c [POWERPC] Xilinx: boot support for Xilinx uart 16550. 2008-04-24 13:32:46 -05:00
of.c [POWERPC] bootwrapper: Move linker symbols into ops.h 2007-08-22 15:27:28 +10:00
of.h [POWERPC] Make more OF-related bootwrapper functions available to non-OF platforms 2007-06-28 19:19:28 +10:00
ofconsole.c [POWERPC] Make more OF-related bootwrapper functions available to non-OF platforms 2007-06-28 19:19:28 +10:00
oflib.c [POWERPC] Make more OF-related bootwrapper functions available to non-OF platforms 2007-06-28 19:19:28 +10:00
ops.h [POWERPC] Add bootwrapper function to get virtual reg from the device tree. 2008-04-17 01:01:37 -05:00
page.h powerpc: Move ppc64 boot wrapper code over to arch/powerpc 2005-11-16 13:52:21 +11:00
planetcore.c [POWERPC] bootwrapper: Add PlanetCore firmware support 2007-10-03 11:48:43 +10:00
planetcore.h [POWERPC] bootwrapper: Add PlanetCore firmware support 2007-10-03 11:48:43 +10:00
ppc_asm.h powerpc: Move ppc64 boot wrapper code over to arch/powerpc 2005-11-16 13:52:21 +11:00
ppcboot.h [POWERPC] bootwrapper: Add TARGET_HAS_ETHn tests to ppcboot.h 2007-08-22 15:21:48 +10:00
pq2.c [POWERPC] bootwrapper: Add fsl_get_immr() and 8xx/pq2 clock functions. 2007-10-03 20:36:35 -05:00
pq2.h [POWERPC] bootwrapper: Add fsl_get_immr() and 8xx/pq2 clock functions. 2007-10-03 20:36:35 -05:00
prpmc2800.c [POWERPC] mv64x60: Remove device tree absolute path references 2008-04-15 21:21:24 +10:00
ps3-head.S [POWERPC] PS3: Bootwrapper improvements 2008-04-01 20:43:07 +11:00
ps3-hvcall.S [POWERPC] PS3: Fix bootwrapper hang bug 2008-02-14 22:11:01 +11:00
ps3.c [POWERPC] PS3: Bootwrapper improvements 2008-04-01 20:43:07 +11:00
redboot-8xx.c [POWERPC] 8xx: Analogue & Micro Adder875 board support. 2008-01-23 19:34:40 -06:00
redboot.h [POWERPC] 8xx: Analogue & Micro Adder875 board support. 2008-01-23 19:34:40 -06:00
reg.h [POWERPC] 4xx: Add mfspr/mtspr inline macros to 4xx bootwrapper 2007-12-23 13:14:22 -06:00
rs6000.h powerpc: Make COFF zImages for old 32-bit powermacs 2006-01-14 15:04:06 +11:00
serial.c [POWERPC] mv64x60: Fix FDT compatible names: mv64x60 => mv64360 2008-04-15 21:21:24 +10:00
simple_alloc.c [POWERPC] bootwrapper: Use `unsigned long' for malloc sizes 2007-04-24 22:06:54 +10:00
simpleboot.c [POWERPC] bootwrapper: Add a firmware-independent simpleboot target. 2008-04-02 20:36:11 -05:00
stdio.c [POWERPC] Add u64 printf to bootwrapper 2007-06-28 19:16:48 +10:00
stdio.h [POWERPC] Add gcc format warnings to zImage printf() 2007-03-26 15:11:20 +10:00
stdlib.c [POWERPC] bootwrapper: Add strtoull() 2007-09-14 01:33:23 +10:00
stdlib.h [POWERPC] bootwrapper: Add strtoull() 2007-09-14 01:33:23 +10:00
string.S [POWERPC] Add memchr() to the bootwrapper 2007-10-12 14:13:44 +10:00
string.h [POWERPC] Add memchr() to the bootwrapper 2007-10-12 14:13:44 +10:00
treeboot-bamboo.c [POWERPC] cuimage for Bamboo board 2007-09-19 21:13:16 -05:00
treeboot-ebony.c [POWERPC] bootwrapper: Move linker symbols into ops.h 2007-08-22 15:27:28 +10:00
treeboot-walnut.c [POWERPC] Start removing linux,network-index in favour of aliases 2008-03-26 07:19:16 -05:00
types.h [POWERPC] Add signed types to bootwrapper 2007-06-28 19:16:47 +10:00
uartlite.c [POWERPC] Uartlite: bootwrapper bug fix, getc loops forever 2007-10-10 09:14:35 -06:00
util.S [POWERPC] Add non-OF serial console support 2006-10-23 12:49:19 +10:00
virtex405-head.S [POWERPC] bootwrapper: Add a firmware-independent simpleboot target. 2008-04-02 20:36:11 -05:00
wrapper [POWERPC] bootwrapper: Use physical address in PHDR for uImage 2008-04-17 07:46:14 +10:00
zImage.coff.lds.S [POWERPC] zImage: Cleanup and improve zImage entry point 2007-03-13 13:35:03 +11:00
zImage.lds.S [POWERPC] zImage: Cleanup and improve zImage entry point 2007-03-13 13:35:03 +11:00
zImage.ps3.lds.S [POWERPC] PS3: Bootwrapper support. 2007-07-10 21:56:40 +10:00

README 

To extract the kernel vmlinux, System.map, .config or initrd from the zImage binary:

objcopy -j .kernel:vmlinux -O binary zImage vmlinux.gz
objcopy -j .kernel:System.map -O binary zImage System.map.gz
objcopy -j .kernel:.config -O binary zImage config.gz
objcopy -j .kernel:initrd -O binary zImage.initrd initrd.gz


	Peter