linux-sg2042/arch/mips/sgi-ip32/ip32-irq.c

558 lines
14 KiB
C

/*
* Code to handle IP32 IRQs
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 2000 Harald Koerfgen
* Copyright (C) 2001 Keith M Wesolowski
*/
#include <linux/init.h>
#include <linux/kernel_stat.h>
#include <linux/types.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/bitops.h>
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/mm.h>
#include <linux/random.h>
#include <linux/sched.h>
#include <asm/irq_cpu.h>
#include <asm/mipsregs.h>
#include <asm/signal.h>
#include <asm/system.h>
#include <asm/time.h>
#include <asm/ip32/crime.h>
#include <asm/ip32/mace.h>
#include <asm/ip32/ip32_ints.h>
/* issue a PIO read to make sure no PIO writes are pending */
static void inline flush_crime_bus(void)
{
crime->control;
}
static void inline flush_mace_bus(void)
{
mace->perif.ctrl.misc;
}
/*
* O2 irq map
*
* IP0 -> software (ignored)
* IP1 -> software (ignored)
* IP2 -> (irq0) C crime 1.1 all interrupts; crime 1.5 ???
* IP3 -> (irq1) X unknown
* IP4 -> (irq2) X unknown
* IP5 -> (irq3) X unknown
* IP6 -> (irq4) X unknown
* IP7 -> (irq5) 7 CPU count/compare timer (system timer)
*
* crime: (C)
*
* CRIME_INT_STAT 31:0:
*
* 0 -> 8 Video in 1
* 1 -> 9 Video in 2
* 2 -> 10 Video out
* 3 -> 11 Mace ethernet
* 4 -> S SuperIO sub-interrupt
* 5 -> M Miscellaneous sub-interrupt
* 6 -> A Audio sub-interrupt
* 7 -> 15 PCI bridge errors
* 8 -> 16 PCI SCSI aic7xxx 0
* 9 -> 17 PCI SCSI aic7xxx 1
* 10 -> 18 PCI slot 0
* 11 -> 19 unused (PCI slot 1)
* 12 -> 20 unused (PCI slot 2)
* 13 -> 21 unused (PCI shared 0)
* 14 -> 22 unused (PCI shared 1)
* 15 -> 23 unused (PCI shared 2)
* 16 -> 24 GBE0 (E)
* 17 -> 25 GBE1 (E)
* 18 -> 26 GBE2 (E)
* 19 -> 27 GBE3 (E)
* 20 -> 28 CPU errors
* 21 -> 29 Memory errors
* 22 -> 30 RE empty edge (E)
* 23 -> 31 RE full edge (E)
* 24 -> 32 RE idle edge (E)
* 25 -> 33 RE empty level
* 26 -> 34 RE full level
* 27 -> 35 RE idle level
* 28 -> 36 unused (software 0) (E)
* 29 -> 37 unused (software 1) (E)
* 30 -> 38 unused (software 2) - crime 1.5 CPU SysCorError (E)
* 31 -> 39 VICE
*
* S, M, A: Use the MACE ISA interrupt register
* MACE_ISA_INT_STAT 31:0
*
* 0-7 -> 40-47 Audio
* 8 -> 48 RTC
* 9 -> 49 Keyboard
* 10 -> X Keyboard polled
* 11 -> 51 Mouse
* 12 -> X Mouse polled
* 13-15 -> 53-55 Count/compare timers
* 16-19 -> 56-59 Parallel (16 E)
* 20-25 -> 60-62 Serial 1 (22 E)
* 26-31 -> 66-71 Serial 2 (28 E)
*
* Note that this means IRQs 12-14, 50, and 52 do not exist. This is a
* different IRQ map than IRIX uses, but that's OK as Linux irq handling
* is quite different anyway.
*/
/* Some initial interrupts to set up */
extern irqreturn_t crime_memerr_intr(int irq, void *dev_id);
extern irqreturn_t crime_cpuerr_intr(int irq, void *dev_id);
static struct irqaction memerr_irq = {
.handler = crime_memerr_intr,
.flags = IRQF_DISABLED,
.name = "CRIME memory error",
};
static struct irqaction cpuerr_irq = {
.handler = crime_cpuerr_intr,
.flags = IRQF_DISABLED,
.name = "CRIME CPU error",
};
/*
* This is for pure CRIME interrupts - ie not MACE. The advantage?
* We get to split the register in half and do faster lookups.
*/
static uint64_t crime_mask;
static inline void crime_enable_irq(unsigned int irq)
{
unsigned int bit = irq - CRIME_IRQ_BASE;
crime_mask |= 1 << bit;
crime->imask = crime_mask;
}
static inline void crime_disable_irq(unsigned int irq)
{
unsigned int bit = irq - CRIME_IRQ_BASE;
crime_mask &= ~(1 << bit);
crime->imask = crime_mask;
flush_crime_bus();
}
static void crime_level_mask_and_ack_irq(unsigned int irq)
{
crime_disable_irq(irq);
}
static void crime_level_end_irq(unsigned int irq)
{
if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
crime_enable_irq(irq);
}
static struct irq_chip crime_level_interrupt = {
.name = "IP32 CRIME",
.ack = crime_level_mask_and_ack_irq,
.mask = crime_disable_irq,
.mask_ack = crime_level_mask_and_ack_irq,
.unmask = crime_enable_irq,
.end = crime_level_end_irq,
};
static void crime_edge_mask_and_ack_irq(unsigned int irq)
{
unsigned int bit = irq - CRIME_IRQ_BASE;
uint64_t crime_int;
/* Edge triggered interrupts must be cleared. */
crime_int = crime->hard_int;
crime_int &= ~(1 << bit);
crime->hard_int = crime_int;
crime_disable_irq(irq);
}
static void crime_edge_end_irq(unsigned int irq)
{
if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
crime_enable_irq(irq);
}
static struct irq_chip crime_edge_interrupt = {
.name = "IP32 CRIME",
.ack = crime_edge_mask_and_ack_irq,
.mask = crime_disable_irq,
.mask_ack = crime_edge_mask_and_ack_irq,
.unmask = crime_enable_irq,
.end = crime_edge_end_irq,
};
/*
* This is for MACE PCI interrupts. We can decrease bus traffic by masking
* as close to the source as possible. This also means we can take the
* next chunk of the CRIME register in one piece.
*/
static unsigned long macepci_mask;
static void enable_macepci_irq(unsigned int irq)
{
macepci_mask |= MACEPCI_CONTROL_INT(irq - MACEPCI_SCSI0_IRQ);
mace->pci.control = macepci_mask;
crime_mask |= 1 << (irq - CRIME_IRQ_BASE);
crime->imask = crime_mask;
}
static void disable_macepci_irq(unsigned int irq)
{
crime_mask &= ~(1 << (irq - CRIME_IRQ_BASE));
crime->imask = crime_mask;
flush_crime_bus();
macepci_mask &= ~MACEPCI_CONTROL_INT(irq - MACEPCI_SCSI0_IRQ);
mace->pci.control = macepci_mask;
flush_mace_bus();
}
static void end_macepci_irq(unsigned int irq)
{
if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
enable_macepci_irq(irq);
}
static struct irq_chip ip32_macepci_interrupt = {
.name = "IP32 MACE PCI",
.ack = disable_macepci_irq,
.mask = disable_macepci_irq,
.mask_ack = disable_macepci_irq,
.unmask = enable_macepci_irq,
.end = end_macepci_irq,
};
/* This is used for MACE ISA interrupts. That means bits 4-6 in the
* CRIME register.
*/
#define MACEISA_AUDIO_INT (MACEISA_AUDIO_SW_INT | \
MACEISA_AUDIO_SC_INT | \
MACEISA_AUDIO1_DMAT_INT | \
MACEISA_AUDIO1_OF_INT | \
MACEISA_AUDIO2_DMAT_INT | \
MACEISA_AUDIO2_MERR_INT | \
MACEISA_AUDIO3_DMAT_INT | \
MACEISA_AUDIO3_MERR_INT)
#define MACEISA_MISC_INT (MACEISA_RTC_INT | \
MACEISA_KEYB_INT | \
MACEISA_KEYB_POLL_INT | \
MACEISA_MOUSE_INT | \
MACEISA_MOUSE_POLL_INT | \
MACEISA_TIMER0_INT | \
MACEISA_TIMER1_INT | \
MACEISA_TIMER2_INT)
#define MACEISA_SUPERIO_INT (MACEISA_PARALLEL_INT | \
MACEISA_PAR_CTXA_INT | \
MACEISA_PAR_CTXB_INT | \
MACEISA_PAR_MERR_INT | \
MACEISA_SERIAL1_INT | \
MACEISA_SERIAL1_TDMAT_INT | \
MACEISA_SERIAL1_TDMAPR_INT | \
MACEISA_SERIAL1_TDMAME_INT | \
MACEISA_SERIAL1_RDMAT_INT | \
MACEISA_SERIAL1_RDMAOR_INT | \
MACEISA_SERIAL2_INT | \
MACEISA_SERIAL2_TDMAT_INT | \
MACEISA_SERIAL2_TDMAPR_INT | \
MACEISA_SERIAL2_TDMAME_INT | \
MACEISA_SERIAL2_RDMAT_INT | \
MACEISA_SERIAL2_RDMAOR_INT)
static unsigned long maceisa_mask;
static void enable_maceisa_irq(unsigned int irq)
{
unsigned int crime_int = 0;
pr_debug("maceisa enable: %u\n", irq);
switch (irq) {
case MACEISA_AUDIO_SW_IRQ ... MACEISA_AUDIO3_MERR_IRQ:
crime_int = MACE_AUDIO_INT;
break;
case MACEISA_RTC_IRQ ... MACEISA_TIMER2_IRQ:
crime_int = MACE_MISC_INT;
break;
case MACEISA_PARALLEL_IRQ ... MACEISA_SERIAL2_RDMAOR_IRQ:
crime_int = MACE_SUPERIO_INT;
break;
}
pr_debug("crime_int %08x enabled\n", crime_int);
crime_mask |= crime_int;
crime->imask = crime_mask;
maceisa_mask |= 1 << (irq - MACEISA_AUDIO_SW_IRQ);
mace->perif.ctrl.imask = maceisa_mask;
}
static void disable_maceisa_irq(unsigned int irq)
{
unsigned int crime_int = 0;
maceisa_mask &= ~(1 << (irq - MACEISA_AUDIO_SW_IRQ));
if (!(maceisa_mask & MACEISA_AUDIO_INT))
crime_int |= MACE_AUDIO_INT;
if (!(maceisa_mask & MACEISA_MISC_INT))
crime_int |= MACE_MISC_INT;
if (!(maceisa_mask & MACEISA_SUPERIO_INT))
crime_int |= MACE_SUPERIO_INT;
crime_mask &= ~crime_int;
crime->imask = crime_mask;
flush_crime_bus();
mace->perif.ctrl.imask = maceisa_mask;
flush_mace_bus();
}
static void mask_and_ack_maceisa_irq(unsigned int irq)
{
unsigned long mace_int;
/* edge triggered */
mace_int = mace->perif.ctrl.istat;
mace_int &= ~(1 << (irq - MACEISA_AUDIO_SW_IRQ));
mace->perif.ctrl.istat = mace_int;
disable_maceisa_irq(irq);
}
static void end_maceisa_irq(unsigned irq)
{
if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
enable_maceisa_irq(irq);
}
static struct irq_chip ip32_maceisa_level_interrupt = {
.name = "IP32 MACE ISA",
.ack = disable_maceisa_irq,
.mask = disable_maceisa_irq,
.mask_ack = disable_maceisa_irq,
.unmask = enable_maceisa_irq,
.end = end_maceisa_irq,
};
static struct irq_chip ip32_maceisa_edge_interrupt = {
.name = "IP32 MACE ISA",
.ack = mask_and_ack_maceisa_irq,
.mask = disable_maceisa_irq,
.mask_ack = mask_and_ack_maceisa_irq,
.unmask = enable_maceisa_irq,
.end = end_maceisa_irq,
};
/* This is used for regular non-ISA, non-PCI MACE interrupts. That means
* bits 0-3 and 7 in the CRIME register.
*/
static void enable_mace_irq(unsigned int irq)
{
unsigned int bit = irq - CRIME_IRQ_BASE;
crime_mask |= (1 << bit);
crime->imask = crime_mask;
}
static void disable_mace_irq(unsigned int irq)
{
unsigned int bit = irq - CRIME_IRQ_BASE;
crime_mask &= ~(1 << bit);
crime->imask = crime_mask;
flush_crime_bus();
}
static void end_mace_irq(unsigned int irq)
{
if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
enable_mace_irq(irq);
}
static struct irq_chip ip32_mace_interrupt = {
.name = "IP32 MACE",
.ack = disable_mace_irq,
.mask = disable_mace_irq,
.mask_ack = disable_mace_irq,
.unmask = enable_mace_irq,
.end = end_mace_irq,
};
static void ip32_unknown_interrupt(void)
{
printk("Unknown interrupt occurred!\n");
printk("cp0_status: %08x\n", read_c0_status());
printk("cp0_cause: %08x\n", read_c0_cause());
printk("CRIME intr mask: %016lx\n", crime->imask);
printk("CRIME intr status: %016lx\n", crime->istat);
printk("CRIME hardware intr register: %016lx\n", crime->hard_int);
printk("MACE ISA intr mask: %08lx\n", mace->perif.ctrl.imask);
printk("MACE ISA intr status: %08lx\n", mace->perif.ctrl.istat);
printk("MACE PCI control register: %08x\n", mace->pci.control);
printk("Register dump:\n");
show_regs(get_irq_regs());
printk("Please mail this report to linux-mips@linux-mips.org\n");
printk("Spinning...");
while(1) ;
}
/* CRIME 1.1 appears to deliver all interrupts to this one pin. */
/* change this to loop over all edge-triggered irqs, exception masked out ones */
static void ip32_irq0(void)
{
uint64_t crime_int;
int irq = 0;
/*
* Sanity check interrupt numbering enum.
* MACE got 32 interrupts and there are 32 MACE ISA interrupts daisy
* chained.
*/
BUILD_BUG_ON(CRIME_VICE_IRQ - MACE_VID_IN1_IRQ != 31);
BUILD_BUG_ON(MACEISA_SERIAL2_RDMAOR_IRQ - MACEISA_AUDIO_SW_IRQ != 31);
crime_int = crime->istat & crime_mask;
/* crime sometime delivers spurious interrupts, ignore them */
if (unlikely(crime_int == 0))
return;
irq = MACE_VID_IN1_IRQ + __ffs(crime_int);
if (crime_int & CRIME_MACEISA_INT_MASK) {
unsigned long mace_int = mace->perif.ctrl.istat;
irq = __ffs(mace_int & maceisa_mask) + MACEISA_AUDIO_SW_IRQ;
}
pr_debug("*irq %u*\n", irq);
do_IRQ(irq);
}
static void ip32_irq1(void)
{
ip32_unknown_interrupt();
}
static void ip32_irq2(void)
{
ip32_unknown_interrupt();
}
static void ip32_irq3(void)
{
ip32_unknown_interrupt();
}
static void ip32_irq4(void)
{
ip32_unknown_interrupt();
}
static void ip32_irq5(void)
{
do_IRQ(MIPS_CPU_IRQ_BASE + 7);
}
asmlinkage void plat_irq_dispatch(void)
{
unsigned int pending = read_c0_status() & read_c0_cause();
if (likely(pending & IE_IRQ0))
ip32_irq0();
else if (unlikely(pending & IE_IRQ1))
ip32_irq1();
else if (unlikely(pending & IE_IRQ2))
ip32_irq2();
else if (unlikely(pending & IE_IRQ3))
ip32_irq3();
else if (unlikely(pending & IE_IRQ4))
ip32_irq4();
else if (likely(pending & IE_IRQ5))
ip32_irq5();
}
void __init arch_init_irq(void)
{
unsigned int irq;
/* Install our interrupt handler, then clear and disable all
* CRIME and MACE interrupts. */
crime->imask = 0;
crime->hard_int = 0;
crime->soft_int = 0;
mace->perif.ctrl.istat = 0;
mace->perif.ctrl.imask = 0;
mips_cpu_irq_init();
for (irq = CRIME_IRQ_BASE; irq <= IP32_IRQ_MAX; irq++) {
switch (irq) {
case MACE_VID_IN1_IRQ ... MACE_PCI_BRIDGE_IRQ:
set_irq_chip_and_handler_name(irq,&ip32_mace_interrupt,
handle_level_irq, "level");
break;
case MACEPCI_SCSI0_IRQ ... MACEPCI_SHARED2_IRQ:
set_irq_chip_and_handler_name(irq,
&ip32_macepci_interrupt, handle_level_irq,
"level");
break;
case CRIME_GBE0_IRQ ... CRIME_GBE3_IRQ:
set_irq_chip_and_handler_name(irq,
&crime_edge_interrupt, handle_edge_irq, "edge");
break;
case CRIME_CPUERR_IRQ:
case CRIME_MEMERR_IRQ:
set_irq_chip_and_handler_name(irq,
&crime_level_interrupt, handle_level_irq,
"level");
break;
case CRIME_RE_EMPTY_E_IRQ ... CRIME_RE_IDLE_E_IRQ:
case CRIME_SOFT0_IRQ ... CRIME_SOFT2_IRQ:
set_irq_chip_and_handler_name(irq,
&crime_edge_interrupt, handle_edge_irq, "edge");
break;
case CRIME_VICE_IRQ:
set_irq_chip_and_handler_name(irq,
&crime_edge_interrupt, handle_edge_irq, "edge");
break;
case MACEISA_PARALLEL_IRQ:
case MACEISA_SERIAL1_TDMAPR_IRQ:
case MACEISA_SERIAL2_TDMAPR_IRQ:
set_irq_chip_and_handler_name(irq,
&ip32_maceisa_edge_interrupt, handle_edge_irq,
"edge");
break;
default:
set_irq_chip_and_handler_name(irq,
&ip32_maceisa_level_interrupt, handle_level_irq,
"level");
break;
}
}
setup_irq(CRIME_MEMERR_IRQ, &memerr_irq);
setup_irq(CRIME_CPUERR_IRQ, &cpuerr_irq);
#define ALLINTS (IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4 | IE_IRQ5)
change_c0_status(ST0_IM, ALLINTS);
}