linux-sg2042/drivers/pcmcia/sa1100_nanoengine.c

134 lines
3.0 KiB
C

/*
* drivers/pcmcia/sa1100_nanoengine.c
*
* PCMCIA implementation routines for BSI nanoEngine.
*
* In order to have a fully functional pcmcia subsystem in a BSE nanoEngine
* board you should carefully read this:
* http://cambuca.ldhs.cetuc.puc-rio.br/nanoengine/
*
* Copyright (C) 2010 Marcelo Roberto Jimenez <mroberto@cpti.cetuc.puc-rio.br>
*
* Based on original work for kernel 2.4 by
* Miguel Freitas <miguel@cpti.cetuc.puc-rio.br>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <linux/device.h>
#include <linux/errno.h>
#include <linux/gpio.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/signal.h>
#include <asm/mach-types.h>
#include <asm/irq.h>
#include <mach/hardware.h>
#include <mach/nanoengine.h>
#include "sa1100_generic.h"
struct nanoengine_pins {
unsigned output_pins;
unsigned clear_outputs;
int gpio_rst;
int gpio_cd;
int gpio_rdy;
};
static struct nanoengine_pins nano_skts[] = {
{
.gpio_rst = GPIO_PC_RESET0,
.gpio_cd = GPIO_PC_CD0,
.gpio_rdy = GPIO_PC_READY0,
}, {
.gpio_rst = GPIO_PC_RESET1,
.gpio_cd = GPIO_PC_CD1,
.gpio_rdy = GPIO_PC_READY1,
}
};
unsigned num_nano_pcmcia_sockets = ARRAY_SIZE(nano_skts);
static int nanoengine_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
{
unsigned i = skt->nr;
int ret;
if (i >= num_nano_pcmcia_sockets)
return -ENXIO;
ret = gpio_request_one(nano_skts[i].gpio_rst, GPIOF_OUT_INIT_LOW,
i ? "PC RST1" : "PC RST0");
if (ret)
return ret;
skt->stat[SOC_STAT_CD].gpio = nano_skts[i].gpio_cd;
skt->stat[SOC_STAT_CD].name = i ? "PC CD1" : "PC CD0";
skt->stat[SOC_STAT_RDY].gpio = nano_skts[i].gpio_rdy;
skt->stat[SOC_STAT_RDY].name = i ? "PC RDY1" : "PC RDY0";
return 0;
}
static void nanoengine_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
{
gpio_free(nano_skts[skt->nr].gpio_rst);
}
static int nanoengine_pcmcia_configure_socket(
struct soc_pcmcia_socket *skt, const socket_state_t *state)
{
unsigned i = skt->nr;
if (i >= num_nano_pcmcia_sockets)
return -ENXIO;
gpio_set_value(nano_skts[skt->nr].gpio_rst, !!(state->flags & SS_RESET));
return 0;
}
static void nanoengine_pcmcia_socket_state(
struct soc_pcmcia_socket *skt, struct pcmcia_state *state)
{
unsigned i = skt->nr;
if (i >= num_nano_pcmcia_sockets)
return;
state->bvd1 = 1;
state->bvd2 = 1;
state->vs_3v = 1; /* Can only apply 3.3V */
state->vs_Xv = 0;
}
static struct pcmcia_low_level nanoengine_pcmcia_ops = {
.owner = THIS_MODULE,
.hw_init = nanoengine_pcmcia_hw_init,
.hw_shutdown = nanoengine_pcmcia_hw_shutdown,
.configure_socket = nanoengine_pcmcia_configure_socket,
.socket_state = nanoengine_pcmcia_socket_state,
};
int pcmcia_nanoengine_init(struct device *dev)
{
int ret = -ENODEV;
if (machine_is_nanoengine())
ret = sa11xx_drv_pcmcia_probe(
dev, &nanoengine_pcmcia_ops, 0, 2);
return ret;
}