hollalinux
/
linux-sg2042
mirror of https://github.com/sophgo/linux-riscv.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
linux-sg2042/drivers/input/touchscreen/bu21013_ts.c

661 lines
17 KiB
C
Raw Blame History

/*
* Copyright (C) ST-Ericsson SA 2010
* Author: Naveen Kumar G <naveen.gaddipati@stericsson.com> for ST-Ericsson
* License terms:GNU General Public License (GPL) version 2
*/
#include <linux/kernel.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/i2c.h>
#include <linux/workqueue.h>
#include <linux/input.h>
#include <linux/input/bu21013.h>
#include <linux/slab.h>
#include <linux/regulator/consumer.h>
#include <linux/module.h>
#define PEN_DOWN_INTR 0
#define MAX_FINGERS 2
#define RESET_DELAY 30
#define PENUP_TIMEOUT (10)
#define DELTA_MIN 16
#define MASK_BITS 0x03
#define SHIFT_8 8
#define SHIFT_2 2
#define LENGTH_OF_BUFFER 11
#define I2C_RETRY_COUNT 5
#define BU21013_SENSORS_BTN_0_7_REG 0x70
#define BU21013_SENSORS_BTN_8_15_REG 0x71
#define BU21013_SENSORS_BTN_16_23_REG 0x72
#define BU21013_X1_POS_MSB_REG 0x73
#define BU21013_X1_POS_LSB_REG 0x74
#define BU21013_Y1_POS_MSB_REG 0x75
#define BU21013_Y1_POS_LSB_REG 0x76
#define BU21013_X2_POS_MSB_REG 0x77
#define BU21013_X2_POS_LSB_REG 0x78
#define BU21013_Y2_POS_MSB_REG 0x79
#define BU21013_Y2_POS_LSB_REG 0x7A
#define BU21013_INT_CLR_REG 0xE8
#define BU21013_INT_MODE_REG 0xE9
#define BU21013_GAIN_REG 0xEA
#define BU21013_OFFSET_MODE_REG 0xEB
#define BU21013_XY_EDGE_REG 0xEC
#define BU21013_RESET_REG 0xED
#define BU21013_CALIB_REG 0xEE
#define BU21013_DONE_REG 0xEF
#define BU21013_SENSOR_0_7_REG 0xF0
#define BU21013_SENSOR_8_15_REG 0xF1
#define BU21013_SENSOR_16_23_REG 0xF2
#define BU21013_POS_MODE1_REG 0xF3
#define BU21013_POS_MODE2_REG 0xF4
#define BU21013_CLK_MODE_REG 0xF5
#define BU21013_IDLE_REG 0xFA
#define BU21013_FILTER_REG 0xFB
#define BU21013_TH_ON_REG 0xFC
#define BU21013_TH_OFF_REG 0xFD
#define BU21013_RESET_ENABLE 0x01
#define BU21013_SENSORS_EN_0_7 0x3F
#define BU21013_SENSORS_EN_8_15 0xFC
#define BU21013_SENSORS_EN_16_23 0x1F
#define BU21013_POS_MODE1_0 0x02
#define BU21013_POS_MODE1_1 0x04
#define BU21013_POS_MODE1_2 0x08
#define BU21013_POS_MODE2_ZERO 0x01
#define BU21013_POS_MODE2_AVG1 0x02
#define BU21013_POS_MODE2_AVG2 0x04
#define BU21013_POS_MODE2_EN_XY 0x08
#define BU21013_POS_MODE2_EN_RAW 0x10
#define BU21013_POS_MODE2_MULTI 0x80
#define BU21013_CLK_MODE_DIV 0x01
#define BU21013_CLK_MODE_EXT 0x02
#define BU21013_CLK_MODE_CALIB 0x80
#define BU21013_IDLET_0 0x01
#define BU21013_IDLET_1 0x02
#define BU21013_IDLET_2 0x04
#define BU21013_IDLET_3 0x08
#define BU21013_IDLE_INTERMIT_EN 0x10
#define BU21013_DELTA_0_6 0x7F
#define BU21013_FILTER_EN 0x80
#define BU21013_INT_MODE_LEVEL 0x00
#define BU21013_INT_MODE_EDGE 0x01
#define BU21013_GAIN_0 0x01
#define BU21013_GAIN_1 0x02
#define BU21013_GAIN_2 0x04
#define BU21013_OFFSET_MODE_DEFAULT 0x00
#define BU21013_OFFSET_MODE_MOVE 0x01
#define BU21013_OFFSET_MODE_DISABLE 0x02
#define BU21013_TH_ON_0 0x01
#define BU21013_TH_ON_1 0x02
#define BU21013_TH_ON_2 0x04
#define BU21013_TH_ON_3 0x08
#define BU21013_TH_ON_4 0x10
#define BU21013_TH_ON_5 0x20
#define BU21013_TH_ON_6 0x40
#define BU21013_TH_ON_7 0x80
#define BU21013_TH_ON_MAX 0xFF
#define BU21013_TH_OFF_0 0x01
#define BU21013_TH_OFF_1 0x02
#define BU21013_TH_OFF_2 0x04
#define BU21013_TH_OFF_3 0x08
#define BU21013_TH_OFF_4 0x10
#define BU21013_TH_OFF_5 0x20
#define BU21013_TH_OFF_6 0x40
#define BU21013_TH_OFF_7 0x80
#define BU21013_TH_OFF_MAX 0xFF
#define BU21013_X_EDGE_0 0x01
#define BU21013_X_EDGE_1 0x02
#define BU21013_X_EDGE_2 0x04
#define BU21013_X_EDGE_3 0x08
#define BU21013_Y_EDGE_0 0x10
#define BU21013_Y_EDGE_1 0x20
#define BU21013_Y_EDGE_2 0x40
#define BU21013_Y_EDGE_3 0x80
#define BU21013_DONE 0x01
#define BU21013_NUMBER_OF_X_SENSORS (6)
#define BU21013_NUMBER_OF_Y_SENSORS (11)
#define DRIVER_TP "bu21013_tp"
/**
* struct bu21013_ts_data - touch panel data structure
* @client: pointer to the i2c client
* @wait: variable to wait_queue_head_t structure
* @touch_stopped: touch stop flag
* @chip: pointer to the touch panel controller
* @in_dev: pointer to the input device structure
* @intr_pin: interrupt pin value
* @regulator: pointer to the Regulator used for touch screen
*
* Touch panel device data structure
*/
struct bu21013_ts_data {
struct i2c_client *client;
wait_queue_head_t wait;
bool touch_stopped;
const struct bu21013_platform_device *chip;
struct input_dev *in_dev;
unsigned int intr_pin;
struct regulator *regulator;
};
/**
* bu21013_read_block_data(): read the touch co-ordinates
* @data: bu21013_ts_data structure pointer
* @buf: byte pointer
*
* Read the touch co-ordinates using i2c read block into buffer
* and returns integer.
*/
static int bu21013_read_block_data(struct bu21013_ts_data *data, u8 *buf)
{
int ret, i;
for (i = 0; i < I2C_RETRY_COUNT; i++) {
ret = i2c_smbus_read_i2c_block_data
(data->client, BU21013_SENSORS_BTN_0_7_REG,
LENGTH_OF_BUFFER, buf);
if (ret == LENGTH_OF_BUFFER)
return 0;
}
return -EINVAL;
}
/**
* bu21013_do_touch_report(): Get the touch co-ordinates
* @data: bu21013_ts_data structure pointer
*
* Get the touch co-ordinates from touch sensor registers and writes
* into device structure and returns integer.
*/
static int bu21013_do_touch_report(struct bu21013_ts_data *data)
{
u8 buf[LENGTH_OF_BUFFER];
unsigned int pos_x[2], pos_y[2];
bool has_x_sensors, has_y_sensors;
int finger_down_count = 0;
int i;
if (data == NULL)
return -EINVAL;
if (bu21013_read_block_data(data, buf) < 0)
return -EINVAL;
has_x_sensors = hweight32(buf[0] & BU21013_SENSORS_EN_0_7);
has_y_sensors = hweight32(((buf[1] & BU21013_SENSORS_EN_8_15) |
((buf[2] & BU21013_SENSORS_EN_16_23) << SHIFT_8)) >> SHIFT_2);
if (!has_x_sensors || !has_y_sensors)
return 0;
for (i = 0; i < MAX_FINGERS; i++) {
const u8 *p = &buf[4 * i + 3];
unsigned int x = p[0] << SHIFT_2 | (p[1] & MASK_BITS);
unsigned int y = p[2] << SHIFT_2 | (p[3] & MASK_BITS);
if (x == 0 || y == 0)
continue;
pos_x[finger_down_count] = x;
pos_y[finger_down_count] = y;
finger_down_count++;
}
if (finger_down_count) {
if (finger_down_count == 2 &&
(abs(pos_x[0] - pos_x[1]) < DELTA_MIN ||
abs(pos_y[0] - pos_y[1]) < DELTA_MIN)) {
return 0;
}
for (i = 0; i < finger_down_count; i++) {
if (data->chip->x_flip)
pos_x[i] = data->chip->touch_x_max - pos_x[i];
if (data->chip->y_flip)
pos_y[i] = data->chip->touch_y_max - pos_y[i];
input_report_abs(data->in_dev,
ABS_MT_POSITION_X, pos_x[i]);
input_report_abs(data->in_dev,
ABS_MT_POSITION_Y, pos_y[i]);
input_mt_sync(data->in_dev);
}
} else
input_mt_sync(data->in_dev);
input_sync(data->in_dev);
return 0;
}
/**
* bu21013_gpio_irq() - gpio thread function for touch interrupt
* @irq: irq value
* @device_data: void pointer
*
* This gpio thread function for touch interrupt
* and returns irqreturn_t.
*/
static irqreturn_t bu21013_gpio_irq(int irq, void *device_data)
{
struct bu21013_ts_data *data = device_data;
struct i2c_client *i2c = data->client;
int retval;
do {
retval = bu21013_do_touch_report(data);
if (retval < 0) {
dev_err(&i2c->dev, "bu21013_do_touch_report failed\n");
return IRQ_NONE;
}
data->intr_pin = data->chip->irq_read_val();
if (data->intr_pin == PEN_DOWN_INTR)
wait_event_timeout(data->wait, data->touch_stopped,
msecs_to_jiffies(2));
} while (!data->intr_pin && !data->touch_stopped);
return IRQ_HANDLED;
}
/**
* bu21013_init_chip() - power on sequence for the bu21013 controller
* @data: device structure pointer
*
* This function is used to power on
* the bu21013 controller and returns integer.
*/
static int bu21013_init_chip(struct bu21013_ts_data *data)
{
int retval;
struct i2c_client *i2c = data->client;
retval = i2c_smbus_write_byte_data(i2c, BU21013_RESET_REG,
BU21013_RESET_ENABLE);
if (retval < 0) {
dev_err(&i2c->dev, "BU21013_RESET reg write failed\n");
return retval;
}
msleep(RESET_DELAY);
retval = i2c_smbus_write_byte_data(i2c, BU21013_SENSOR_0_7_REG,
BU21013_SENSORS_EN_0_7);
if (retval < 0) {
dev_err(&i2c->dev, "BU21013_SENSOR_0_7 reg write failed\n");
return retval;
}
retval = i2c_smbus_write_byte_data(i2c, BU21013_SENSOR_8_15_REG,
BU21013_SENSORS_EN_8_15);
if (retval < 0) {
dev_err(&i2c->dev, "BU21013_SENSOR_8_15 reg write failed\n");
return retval;
}
retval = i2c_smbus_write_byte_data(i2c, BU21013_SENSOR_16_23_REG,
BU21013_SENSORS_EN_16_23);
if (retval < 0) {
dev_err(&i2c->dev, "BU21013_SENSOR_16_23 reg write failed\n");
return retval;
}
retval = i2c_smbus_write_byte_data(i2c, BU21013_POS_MODE1_REG,
(BU21013_POS_MODE1_0 | BU21013_POS_MODE1_1));
if (retval < 0) {
dev_err(&i2c->dev, "BU21013_POS_MODE1 reg write failed\n");
return retval;
}
retval = i2c_smbus_write_byte_data(i2c, BU21013_POS_MODE2_REG,
(BU21013_POS_MODE2_ZERO | BU21013_POS_MODE2_AVG1 |
BU21013_POS_MODE2_AVG2 | BU21013_POS_MODE2_EN_RAW |
BU21013_POS_MODE2_MULTI));
if (retval < 0) {
dev_err(&i2c->dev, "BU21013_POS_MODE2 reg write failed\n");
return retval;
}
if (data->chip->ext_clk)
retval = i2c_smbus_write_byte_data(i2c, BU21013_CLK_MODE_REG,
(BU21013_CLK_MODE_EXT | BU21013_CLK_MODE_CALIB));
else
retval = i2c_smbus_write_byte_data(i2c, BU21013_CLK_MODE_REG,
(BU21013_CLK_MODE_DIV | BU21013_CLK_MODE_CALIB));
if (retval < 0) {
dev_err(&i2c->dev, "BU21013_CLK_MODE reg write failed\n");
return retval;
}
retval = i2c_smbus_write_byte_data(i2c, BU21013_IDLE_REG,
(BU21013_IDLET_0 | BU21013_IDLE_INTERMIT_EN));
if (retval < 0) {
dev_err(&i2c->dev, "BU21013_IDLE reg write failed\n");
return retval;
}
retval = i2c_smbus_write_byte_data(i2c, BU21013_INT_MODE_REG,
BU21013_INT_MODE_LEVEL);
if (retval < 0) {
dev_err(&i2c->dev, "BU21013_INT_MODE reg write failed\n");
return retval;
}
retval = i2c_smbus_write_byte_data(i2c, BU21013_FILTER_REG,
(BU21013_DELTA_0_6 |
BU21013_FILTER_EN));
if (retval < 0) {
dev_err(&i2c->dev, "BU21013_FILTER reg write failed\n");
return retval;
}
retval = i2c_smbus_write_byte_data(i2c, BU21013_TH_ON_REG,
BU21013_TH_ON_5);
if (retval < 0) {
dev_err(&i2c->dev, "BU21013_TH_ON reg write failed\n");
return retval;
}
retval = i2c_smbus_write_byte_data(i2c, BU21013_TH_OFF_REG,
BU21013_TH_OFF_4 | BU21013_TH_OFF_3);
if (retval < 0) {
dev_err(&i2c->dev, "BU21013_TH_OFF reg write failed\n");
return retval;
}
retval = i2c_smbus_write_byte_data(i2c, BU21013_GAIN_REG,
(BU21013_GAIN_0 | BU21013_GAIN_1));
if (retval < 0) {
dev_err(&i2c->dev, "BU21013_GAIN reg write failed\n");
return retval;
}
retval = i2c_smbus_write_byte_data(i2c, BU21013_OFFSET_MODE_REG,
BU21013_OFFSET_MODE_DEFAULT);
if (retval < 0) {
dev_err(&i2c->dev, "BU21013_OFFSET_MODE reg write failed\n");
return retval;
}
retval = i2c_smbus_write_byte_data(i2c, BU21013_XY_EDGE_REG,
(BU21013_X_EDGE_0 | BU21013_X_EDGE_2 |
BU21013_Y_EDGE_1 | BU21013_Y_EDGE_3));
if (retval < 0) {
dev_err(&i2c->dev, "BU21013_XY_EDGE reg write failed\n");
return retval;
}
retval = i2c_smbus_write_byte_data(i2c, BU21013_DONE_REG,
BU21013_DONE);
if (retval < 0) {
dev_err(&i2c->dev, "BU21013_REG_DONE reg write failed\n");
return retval;
}
return 0;
}
/**
* bu21013_free_irq() - frees IRQ registered for touchscreen
* @bu21013_data: device structure pointer
*
* This function signals interrupt thread to stop processing and
* frees interrupt.
*/
static void bu21013_free_irq(struct bu21013_ts_data *bu21013_data)
{
bu21013_data->touch_stopped = true;
wake_up(&bu21013_data->wait);
free_irq(bu21013_data->chip->irq, bu21013_data);
}
/**
* bu21013_probe() - initializes the i2c-client touchscreen driver
* @client: i2c client structure pointer
* @id: i2c device id pointer
*
* This function used to initializes the i2c-client touchscreen
* driver and returns integer.
*/
static int __devinit bu21013_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct bu21013_ts_data *bu21013_data;
struct input_dev *in_dev;
const struct bu21013_platform_device *pdata =
client->dev.platform_data;
int error;
if (!i2c_check_functionality(client->adapter,
I2C_FUNC_SMBUS_BYTE_DATA)) {
dev_err(&client->dev, "i2c smbus byte data not supported\n");
return -EIO;
}
if (!pdata) {
dev_err(&client->dev, "platform data not defined\n");
return -EINVAL;
}
bu21013_data = kzalloc(sizeof(struct bu21013_ts_data), GFP_KERNEL);
in_dev = input_allocate_device();
if (!bu21013_data || !in_dev) {
dev_err(&client->dev, "device memory alloc failed\n");
error = -ENOMEM;
goto err_free_mem;
}
bu21013_data->in_dev = in_dev;
bu21013_data->chip = pdata;
bu21013_data->client = client;
bu21013_data->regulator = regulator_get(&client->dev, "V-TOUCH");
if (IS_ERR(bu21013_data->regulator)) {
dev_err(&client->dev, "regulator_get failed\n");
error = PTR_ERR(bu21013_data->regulator);
goto err_free_mem;
}
error = regulator_enable(bu21013_data->regulator);
if (error < 0) {
dev_err(&client->dev, "regulator enable failed\n");
goto err_put_regulator;
}
bu21013_data->touch_stopped = false;
init_waitqueue_head(&bu21013_data->wait);
/* configure the gpio pins */
if (pdata->cs_en) {
error = pdata->cs_en(pdata->cs_pin);
if (error < 0) {
dev_err(&client->dev, "chip init failed\n");
goto err_disable_regulator;
}
}
/* configure the touch panel controller */
error = bu21013_init_chip(bu21013_data);
if (error) {
dev_err(&client->dev, "error in bu21013 config\n");
goto err_cs_disable;
}
/* register the device to input subsystem */
in_dev->name = DRIVER_TP;
in_dev->id.bustype = BUS_I2C;
in_dev->dev.parent = &client->dev;
__set_bit(EV_SYN, in_dev->evbit);
__set_bit(EV_KEY, in_dev->evbit);
__set_bit(EV_ABS, in_dev->evbit);
input_set_abs_params(in_dev, ABS_MT_POSITION_X, 0,
pdata->touch_x_max, 0, 0);
input_set_abs_params(in_dev, ABS_MT_POSITION_Y, 0,
pdata->touch_y_max, 0, 0);
input_set_drvdata(in_dev, bu21013_data);
error = request_threaded_irq(pdata->irq, NULL, bu21013_gpio_irq,
IRQF_TRIGGER_FALLING | IRQF_SHARED |
IRQF_ONESHOT,
DRIVER_TP, bu21013_data);
if (error) {
dev_err(&client->dev, "request irq %d failed\n", pdata->irq);
goto err_cs_disable;
}
error = input_register_device(in_dev);
if (error) {
dev_err(&client->dev, "failed to register input device\n");
goto err_free_irq;
}
device_init_wakeup(&client->dev, pdata->wakeup);
i2c_set_clientdata(client, bu21013_data);
return 0;
err_free_irq:
bu21013_free_irq(bu21013_data);
err_cs_disable:
pdata->cs_dis(pdata->cs_pin);
err_disable_regulator:
regulator_disable(bu21013_data->regulator);
err_put_regulator:
regulator_put(bu21013_data->regulator);
err_free_mem:
input_free_device(in_dev);
kfree(bu21013_data);
return error;
}
/**
* bu21013_remove() - removes the i2c-client touchscreen driver
* @client: i2c client structure pointer
*
* This function uses to remove the i2c-client
* touchscreen driver and returns integer.
*/
static int __devexit bu21013_remove(struct i2c_client *client)
{
struct bu21013_ts_data *bu21013_data = i2c_get_clientdata(client);
bu21013_free_irq(bu21013_data);
bu21013_data->chip->cs_dis(bu21013_data->chip->cs_pin);
input_unregister_device(bu21013_data->in_dev);
regulator_disable(bu21013_data->regulator);
regulator_put(bu21013_data->regulator);
kfree(bu21013_data);
device_init_wakeup(&client->dev, false);
return 0;
}
#ifdef CONFIG_PM
/**
* bu21013_suspend() - suspend the touch screen controller
* @dev: pointer to device structure
*
* This function is used to suspend the
* touch panel controller and returns integer
*/
static int bu21013_suspend(struct device *dev)
{
struct bu21013_ts_data *bu21013_data = dev_get_drvdata(dev);
struct i2c_client *client = bu21013_data->client;
bu21013_data->touch_stopped = true;
if (device_may_wakeup(&client->dev))
enable_irq_wake(bu21013_data->chip->irq);
else
disable_irq(bu21013_data->chip->irq);
regulator_disable(bu21013_data->regulator);
return 0;
}
/**
* bu21013_resume() - resume the touch screen controller
* @dev: pointer to device structure
*
* This function is used to resume the touch panel
* controller and returns integer.
*/
static int bu21013_resume(struct device *dev)
{
struct bu21013_ts_data *bu21013_data = dev_get_drvdata(dev);
struct i2c_client *client = bu21013_data->client;
int retval;
retval = regulator_enable(bu21013_data->regulator);
if (retval < 0) {
dev_err(&client->dev, "bu21013 regulator enable failed\n");
return retval;
}
retval = bu21013_init_chip(bu21013_data);
if (retval < 0) {
dev_err(&client->dev, "bu21013 controller config failed\n");
return retval;
}
bu21013_data->touch_stopped = false;
if (device_may_wakeup(&client->dev))
disable_irq_wake(bu21013_data->chip->irq);
else
enable_irq(bu21013_data->chip->irq);
return 0;
}
static const struct dev_pm_ops bu21013_dev_pm_ops = {
.suspend = bu21013_suspend,
.resume = bu21013_resume,
};
#endif
static const struct i2c_device_id bu21013_id[] = {
{ DRIVER_TP, 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, bu21013_id);
static struct i2c_driver bu21013_driver = {
.driver = {
.name = DRIVER_TP,
.owner = THIS_MODULE,
#ifdef CONFIG_PM
.pm = &bu21013_dev_pm_ops,
#endif
},
.probe = bu21013_probe,
.remove = __devexit_p(bu21013_remove),
.id_table = bu21013_id,
};
module_i2c_driver(bu21013_driver);
MODULE_LICENSE("GPL v2");
MODULE_AUTHOR("Naveen Kumar G <naveen.gaddipati@stericsson.com>");
MODULE_DESCRIPTION("bu21013 touch screen controller driver");
Reference in New Issue View Git Blame Copy Permalink