67 lines
2.3 KiB
Plaintext
67 lines
2.3 KiB
Plaintext
* Cadence PCIe host controller
|
|
|
|
This PCIe controller inherits the base properties defined in
|
|
host-generic-pci.txt.
|
|
|
|
Required properties:
|
|
- compatible: Should contain "cdns,cdns-pcie-host" to identify the IP used.
|
|
- reg: Should contain the controller register base address, PCIe configuration
|
|
window base address, and AXI interface region base address respectively.
|
|
- reg-names: Must be "reg", "cfg" and "mem" respectively.
|
|
- #address-cells: Set to <3>
|
|
- #size-cells: Set to <2>
|
|
- device_type: Set to "pci"
|
|
- ranges: Ranges for the PCI memory and I/O regions
|
|
- #interrupt-cells: Set to <1>
|
|
- interrupt-map-mask and interrupt-map: Standard PCI properties to define the
|
|
mapping of the PCIe interface to interrupt numbers.
|
|
|
|
Optional properties:
|
|
- cdns,max-outbound-regions: Set to maximum number of outbound regions
|
|
(default 32)
|
|
- cdns,no-bar-match-nbits: Set into the no BAR match register to configure the
|
|
number of least significant bits kept during inbound (PCIe -> AXI) address
|
|
translations (default 32)
|
|
- vendor-id: The PCI vendor ID (16 bits, default is design dependent)
|
|
- device-id: The PCI device ID (16 bits, default is design dependent)
|
|
- phys: From PHY bindings: List of Generic PHY phandles. One per lane if more
|
|
than one in the list. If only one PHY listed it must manage all lanes.
|
|
- phy-names: List of names to identify the PHY.
|
|
|
|
Example:
|
|
|
|
pcie@fb000000 {
|
|
compatible = "cdns,cdns-pcie-host";
|
|
device_type = "pci";
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
bus-range = <0x0 0xff>;
|
|
linux,pci-domain = <0>;
|
|
cdns,max-outbound-regions = <16>;
|
|
cdns,no-bar-match-nbits = <32>;
|
|
vendor-id = /bits/ 16 <0x17cd>;
|
|
device-id = /bits/ 16 <0x0200>;
|
|
|
|
reg = <0x0 0xfb000000 0x0 0x01000000>,
|
|
<0x0 0x41000000 0x0 0x00001000>,
|
|
<0x0 0x40000000 0x0 0x04000000>;
|
|
reg-names = "reg", "cfg", "mem";
|
|
|
|
ranges = <0x02000000 0x0 0x42000000 0x0 0x42000000 0x0 0x1000000>,
|
|
<0x01000000 0x0 0x43000000 0x0 0x43000000 0x0 0x0010000>;
|
|
|
|
#interrupt-cells = <0x1>;
|
|
|
|
interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0x0 0x0 14 0x1
|
|
0x0 0x0 0x0 0x2 &gic 0x0 0x0 0x0 15 0x1
|
|
0x0 0x0 0x0 0x3 &gic 0x0 0x0 0x0 16 0x1
|
|
0x0 0x0 0x0 0x4 &gic 0x0 0x0 0x0 17 0x1>;
|
|
|
|
interrupt-map-mask = <0x0 0x0 0x0 0x7>;
|
|
|
|
msi-parent = <&its_pci>;
|
|
|
|
phys = <&pcie_phy0>;
|
|
phy-names = "pcie-phy";
|
|
};
|