linux-sg2042/drivers/virtio/virtio_ring.c

719 lines
19 KiB
C

/* Virtio ring implementation.
*
* Copyright 2007 Rusty Russell IBM Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/virtio.h>
#include <linux/virtio_ring.h>
#include <linux/virtio_config.h>
#include <linux/device.h>
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/hrtimer.h>
/* virtio guest is communicating with a virtual "device" that actually runs on
* a host processor. Memory barriers are used to control SMP effects. */
#ifdef CONFIG_SMP
/* Where possible, use SMP barriers which are more lightweight than mandatory
* barriers, because mandatory barriers control MMIO effects on accesses
* through relaxed memory I/O windows (which virtio-pci does not use). */
#define virtio_mb(vq) \
do { if ((vq)->weak_barriers) smp_mb(); else mb(); } while(0)
#define virtio_rmb(vq) \
do { if ((vq)->weak_barriers) smp_rmb(); else rmb(); } while(0)
#define virtio_wmb(vq) \
do { if ((vq)->weak_barriers) smp_rmb(); else rmb(); } while(0)
#else
/* We must force memory ordering even if guest is UP since host could be
* running on another CPU, but SMP barriers are defined to barrier() in that
* configuration. So fall back to mandatory barriers instead. */
#define virtio_mb(vq) mb()
#define virtio_rmb(vq) rmb()
#define virtio_wmb(vq) wmb()
#endif
#ifdef DEBUG
/* For development, we want to crash whenever the ring is screwed. */
#define BAD_RING(_vq, fmt, args...) \
do { \
dev_err(&(_vq)->vq.vdev->dev, \
"%s:"fmt, (_vq)->vq.name, ##args); \
BUG(); \
} while (0)
/* Caller is supposed to guarantee no reentry. */
#define START_USE(_vq) \
do { \
if ((_vq)->in_use) \
panic("%s:in_use = %i\n", \
(_vq)->vq.name, (_vq)->in_use); \
(_vq)->in_use = __LINE__; \
} while (0)
#define END_USE(_vq) \
do { BUG_ON(!(_vq)->in_use); (_vq)->in_use = 0; } while(0)
#else
#define BAD_RING(_vq, fmt, args...) \
do { \
dev_err(&_vq->vq.vdev->dev, \
"%s:"fmt, (_vq)->vq.name, ##args); \
(_vq)->broken = true; \
} while (0)
#define START_USE(vq)
#define END_USE(vq)
#endif
struct vring_virtqueue
{
struct virtqueue vq;
/* Actual memory layout for this queue */
struct vring vring;
/* Can we use weak barriers? */
bool weak_barriers;
/* Other side has made a mess, don't try any more. */
bool broken;
/* Host supports indirect buffers */
bool indirect;
/* Host publishes avail event idx */
bool event;
/* Number of free buffers */
unsigned int num_free;
/* Head of free buffer list. */
unsigned int free_head;
/* Number we've added since last sync. */
unsigned int num_added;
/* Last used index we've seen. */
u16 last_used_idx;
/* How to notify other side. FIXME: commonalize hcalls! */
void (*notify)(struct virtqueue *vq);
#ifdef DEBUG
/* They're supposed to lock for us. */
unsigned int in_use;
/* Figure out if their kicks are too delayed. */
bool last_add_time_valid;
ktime_t last_add_time;
#endif
/* Tokens for callbacks. */
void *data[];
};
#define to_vvq(_vq) container_of(_vq, struct vring_virtqueue, vq)
/* Set up an indirect table of descriptors and add it to the queue. */
static int vring_add_indirect(struct vring_virtqueue *vq,
struct scatterlist sg[],
unsigned int out,
unsigned int in,
gfp_t gfp)
{
struct vring_desc *desc;
unsigned head;
int i;
desc = kmalloc((out + in) * sizeof(struct vring_desc), gfp);
if (!desc)
return -ENOMEM;
/* Transfer entries from the sg list into the indirect page */
for (i = 0; i < out; i++) {
desc[i].flags = VRING_DESC_F_NEXT;
desc[i].addr = sg_phys(sg);
desc[i].len = sg->length;
desc[i].next = i+1;
sg++;
}
for (; i < (out + in); i++) {
desc[i].flags = VRING_DESC_F_NEXT|VRING_DESC_F_WRITE;
desc[i].addr = sg_phys(sg);
desc[i].len = sg->length;
desc[i].next = i+1;
sg++;
}
/* Last one doesn't continue. */
desc[i-1].flags &= ~VRING_DESC_F_NEXT;
desc[i-1].next = 0;
/* We're about to use a buffer */
vq->num_free--;
/* Use a single buffer which doesn't continue */
head = vq->free_head;
vq->vring.desc[head].flags = VRING_DESC_F_INDIRECT;
vq->vring.desc[head].addr = virt_to_phys(desc);
vq->vring.desc[head].len = i * sizeof(struct vring_desc);
/* Update free pointer */
vq->free_head = vq->vring.desc[head].next;
return head;
}
/**
* virtqueue_add_buf - expose buffer to other end
* @vq: the struct virtqueue we're talking about.
* @sg: the description of the buffer(s).
* @out_num: the number of sg readable by other side
* @in_num: the number of sg which are writable (after readable ones)
* @data: the token identifying the buffer.
* @gfp: how to do memory allocations (if necessary).
*
* Caller must ensure we don't call this with other virtqueue operations
* at the same time (except where noted).
*
* Returns remaining capacity of queue or a negative error
* (ie. ENOSPC). Note that it only really makes sense to treat all
* positive return values as "available": indirect buffers mean that
* we can put an entire sg[] array inside a single queue entry.
*/
int virtqueue_add_buf(struct virtqueue *_vq,
struct scatterlist sg[],
unsigned int out,
unsigned int in,
void *data,
gfp_t gfp)
{
struct vring_virtqueue *vq = to_vvq(_vq);
unsigned int i, avail, uninitialized_var(prev);
int head;
START_USE(vq);
BUG_ON(data == NULL);
#ifdef DEBUG
{
ktime_t now = ktime_get();
/* No kick or get, with .1 second between? Warn. */
if (vq->last_add_time_valid)
WARN_ON(ktime_to_ms(ktime_sub(now, vq->last_add_time))
> 100);
vq->last_add_time = now;
vq->last_add_time_valid = true;
}
#endif
/* If the host supports indirect descriptor tables, and we have multiple
* buffers, then go indirect. FIXME: tune this threshold */
if (vq->indirect && (out + in) > 1 && vq->num_free) {
head = vring_add_indirect(vq, sg, out, in, gfp);
if (likely(head >= 0))
goto add_head;
}
BUG_ON(out + in > vq->vring.num);
BUG_ON(out + in == 0);
if (vq->num_free < out + in) {
pr_debug("Can't add buf len %i - avail = %i\n",
out + in, vq->num_free);
/* FIXME: for historical reasons, we force a notify here if
* there are outgoing parts to the buffer. Presumably the
* host should service the ring ASAP. */
if (out)
vq->notify(&vq->vq);
END_USE(vq);
return -ENOSPC;
}
/* We're about to use some buffers from the free list. */
vq->num_free -= out + in;
head = vq->free_head;
for (i = vq->free_head; out; i = vq->vring.desc[i].next, out--) {
vq->vring.desc[i].flags = VRING_DESC_F_NEXT;
vq->vring.desc[i].addr = sg_phys(sg);
vq->vring.desc[i].len = sg->length;
prev = i;
sg++;
}
for (; in; i = vq->vring.desc[i].next, in--) {
vq->vring.desc[i].flags = VRING_DESC_F_NEXT|VRING_DESC_F_WRITE;
vq->vring.desc[i].addr = sg_phys(sg);
vq->vring.desc[i].len = sg->length;
prev = i;
sg++;
}
/* Last one doesn't continue. */
vq->vring.desc[prev].flags &= ~VRING_DESC_F_NEXT;
/* Update free pointer */
vq->free_head = i;
add_head:
/* Set token. */
vq->data[head] = data;
/* Put entry in available array (but don't update avail->idx until they
* do sync). */
avail = (vq->vring.avail->idx & (vq->vring.num-1));
vq->vring.avail->ring[avail] = head;
/* Descriptors and available array need to be set before we expose the
* new available array entries. */
virtio_wmb(vq);
vq->vring.avail->idx++;
vq->num_added++;
/* This is very unlikely, but theoretically possible. Kick
* just in case. */
if (unlikely(vq->num_added == (1 << 16) - 1))
virtqueue_kick(_vq);
pr_debug("Added buffer head %i to %p\n", head, vq);
END_USE(vq);
return vq->num_free;
}
EXPORT_SYMBOL_GPL(virtqueue_add_buf);
/**
* virtqueue_kick_prepare - first half of split virtqueue_kick call.
* @vq: the struct virtqueue
*
* Instead of virtqueue_kick(), you can do:
* if (virtqueue_kick_prepare(vq))
* virtqueue_notify(vq);
*
* This is sometimes useful because the virtqueue_kick_prepare() needs
* to be serialized, but the actual virtqueue_notify() call does not.
*/
bool virtqueue_kick_prepare(struct virtqueue *_vq)
{
struct vring_virtqueue *vq = to_vvq(_vq);
u16 new, old;
bool needs_kick;
START_USE(vq);
/* Descriptors and available array need to be set before we expose the
* new available array entries. */
virtio_wmb(vq);
old = vq->vring.avail->idx - vq->num_added;
new = vq->vring.avail->idx;
vq->num_added = 0;
#ifdef DEBUG
if (vq->last_add_time_valid) {
WARN_ON(ktime_to_ms(ktime_sub(ktime_get(),
vq->last_add_time)) > 100);
}
vq->last_add_time_valid = false;
#endif
if (vq->event) {
needs_kick = vring_need_event(vring_avail_event(&vq->vring),
new, old);
} else {
needs_kick = !(vq->vring.used->flags & VRING_USED_F_NO_NOTIFY);
}
END_USE(vq);
return needs_kick;
}
EXPORT_SYMBOL_GPL(virtqueue_kick_prepare);
/**
* virtqueue_notify - second half of split virtqueue_kick call.
* @vq: the struct virtqueue
*
* This does not need to be serialized.
*/
void virtqueue_notify(struct virtqueue *_vq)
{
struct vring_virtqueue *vq = to_vvq(_vq);
/* Prod other side to tell it about changes. */
vq->notify(_vq);
}
EXPORT_SYMBOL_GPL(virtqueue_notify);
/**
* virtqueue_kick - update after add_buf
* @vq: the struct virtqueue
*
* After one or more virtqueue_add_buf calls, invoke this to kick
* the other side.
*
* Caller must ensure we don't call this with other virtqueue
* operations at the same time (except where noted).
*/
void virtqueue_kick(struct virtqueue *vq)
{
if (virtqueue_kick_prepare(vq))
virtqueue_notify(vq);
}
EXPORT_SYMBOL_GPL(virtqueue_kick);
static void detach_buf(struct vring_virtqueue *vq, unsigned int head)
{
unsigned int i;
/* Clear data ptr. */
vq->data[head] = NULL;
/* Put back on free list: find end */
i = head;
/* Free the indirect table */
if (vq->vring.desc[i].flags & VRING_DESC_F_INDIRECT)
kfree(phys_to_virt(vq->vring.desc[i].addr));
while (vq->vring.desc[i].flags & VRING_DESC_F_NEXT) {
i = vq->vring.desc[i].next;
vq->num_free++;
}
vq->vring.desc[i].next = vq->free_head;
vq->free_head = head;
/* Plus final descriptor */
vq->num_free++;
}
static inline bool more_used(const struct vring_virtqueue *vq)
{
return vq->last_used_idx != vq->vring.used->idx;
}
/**
* virtqueue_get_buf - get the next used buffer
* @vq: the struct virtqueue we're talking about.
* @len: the length written into the buffer
*
* If the driver wrote data into the buffer, @len will be set to the
* amount written. This means you don't need to clear the buffer
* beforehand to ensure there's no data leakage in the case of short
* writes.
*
* Caller must ensure we don't call this with other virtqueue
* operations at the same time (except where noted).
*
* Returns NULL if there are no used buffers, or the "data" token
* handed to virtqueue_add_buf().
*/
void *virtqueue_get_buf(struct virtqueue *_vq, unsigned int *len)
{
struct vring_virtqueue *vq = to_vvq(_vq);
void *ret;
unsigned int i;
u16 last_used;
START_USE(vq);
if (unlikely(vq->broken)) {
END_USE(vq);
return NULL;
}
if (!more_used(vq)) {
pr_debug("No more buffers in queue\n");
END_USE(vq);
return NULL;
}
/* Only get used array entries after they have been exposed by host. */
virtio_rmb(vq);
last_used = (vq->last_used_idx & (vq->vring.num - 1));
i = vq->vring.used->ring[last_used].id;
*len = vq->vring.used->ring[last_used].len;
if (unlikely(i >= vq->vring.num)) {
BAD_RING(vq, "id %u out of range\n", i);
return NULL;
}
if (unlikely(!vq->data[i])) {
BAD_RING(vq, "id %u is not a head!\n", i);
return NULL;
}
/* detach_buf clears data, so grab it now. */
ret = vq->data[i];
detach_buf(vq, i);
vq->last_used_idx++;
/* If we expect an interrupt for the next entry, tell host
* by writing event index and flush out the write before
* the read in the next get_buf call. */
if (!(vq->vring.avail->flags & VRING_AVAIL_F_NO_INTERRUPT)) {
vring_used_event(&vq->vring) = vq->last_used_idx;
virtio_mb(vq);
}
#ifdef DEBUG
vq->last_add_time_valid = false;
#endif
END_USE(vq);
return ret;
}
EXPORT_SYMBOL_GPL(virtqueue_get_buf);
/**
* virtqueue_disable_cb - disable callbacks
* @vq: the struct virtqueue we're talking about.
*
* Note that this is not necessarily synchronous, hence unreliable and only
* useful as an optimization.
*
* Unlike other operations, this need not be serialized.
*/
void virtqueue_disable_cb(struct virtqueue *_vq)
{
struct vring_virtqueue *vq = to_vvq(_vq);
vq->vring.avail->flags |= VRING_AVAIL_F_NO_INTERRUPT;
}
EXPORT_SYMBOL_GPL(virtqueue_disable_cb);
/**
* virtqueue_enable_cb - restart callbacks after disable_cb.
* @vq: the struct virtqueue we're talking about.
*
* This re-enables callbacks; it returns "false" if there are pending
* buffers in the queue, to detect a possible race between the driver
* checking for more work, and enabling callbacks.
*
* Caller must ensure we don't call this with other virtqueue
* operations at the same time (except where noted).
*/
bool virtqueue_enable_cb(struct virtqueue *_vq)
{
struct vring_virtqueue *vq = to_vvq(_vq);
START_USE(vq);
/* We optimistically turn back on interrupts, then check if there was
* more to do. */
/* Depending on the VIRTIO_RING_F_EVENT_IDX feature, we need to
* either clear the flags bit or point the event index at the next
* entry. Always do both to keep code simple. */
vq->vring.avail->flags &= ~VRING_AVAIL_F_NO_INTERRUPT;
vring_used_event(&vq->vring) = vq->last_used_idx;
virtio_mb(vq);
if (unlikely(more_used(vq))) {
END_USE(vq);
return false;
}
END_USE(vq);
return true;
}
EXPORT_SYMBOL_GPL(virtqueue_enable_cb);
/**
* virtqueue_enable_cb_delayed - restart callbacks after disable_cb.
* @vq: the struct virtqueue we're talking about.
*
* This re-enables callbacks but hints to the other side to delay
* interrupts until most of the available buffers have been processed;
* it returns "false" if there are many pending buffers in the queue,
* to detect a possible race between the driver checking for more work,
* and enabling callbacks.
*
* Caller must ensure we don't call this with other virtqueue
* operations at the same time (except where noted).
*/
bool virtqueue_enable_cb_delayed(struct virtqueue *_vq)
{
struct vring_virtqueue *vq = to_vvq(_vq);
u16 bufs;
START_USE(vq);
/* We optimistically turn back on interrupts, then check if there was
* more to do. */
/* Depending on the VIRTIO_RING_F_USED_EVENT_IDX feature, we need to
* either clear the flags bit or point the event index at the next
* entry. Always do both to keep code simple. */
vq->vring.avail->flags &= ~VRING_AVAIL_F_NO_INTERRUPT;
/* TODO: tune this threshold */
bufs = (u16)(vq->vring.avail->idx - vq->last_used_idx) * 3 / 4;
vring_used_event(&vq->vring) = vq->last_used_idx + bufs;
virtio_mb(vq);
if (unlikely((u16)(vq->vring.used->idx - vq->last_used_idx) > bufs)) {
END_USE(vq);
return false;
}
END_USE(vq);
return true;
}
EXPORT_SYMBOL_GPL(virtqueue_enable_cb_delayed);
/**
* virtqueue_detach_unused_buf - detach first unused buffer
* @vq: the struct virtqueue we're talking about.
*
* Returns NULL or the "data" token handed to virtqueue_add_buf().
* This is not valid on an active queue; it is useful only for device
* shutdown.
*/
void *virtqueue_detach_unused_buf(struct virtqueue *_vq)
{
struct vring_virtqueue *vq = to_vvq(_vq);
unsigned int i;
void *buf;
START_USE(vq);
for (i = 0; i < vq->vring.num; i++) {
if (!vq->data[i])
continue;
/* detach_buf clears data, so grab it now. */
buf = vq->data[i];
detach_buf(vq, i);
vq->vring.avail->idx--;
END_USE(vq);
return buf;
}
/* That should have freed everything. */
BUG_ON(vq->num_free != vq->vring.num);
END_USE(vq);
return NULL;
}
EXPORT_SYMBOL_GPL(virtqueue_detach_unused_buf);
irqreturn_t vring_interrupt(int irq, void *_vq)
{
struct vring_virtqueue *vq = to_vvq(_vq);
if (!more_used(vq)) {
pr_debug("virtqueue interrupt with no work for %p\n", vq);
return IRQ_NONE;
}
if (unlikely(vq->broken))
return IRQ_HANDLED;
pr_debug("virtqueue callback for %p (%p)\n", vq, vq->vq.callback);
if (vq->vq.callback)
vq->vq.callback(&vq->vq);
return IRQ_HANDLED;
}
EXPORT_SYMBOL_GPL(vring_interrupt);
struct virtqueue *vring_new_virtqueue(unsigned int num,
unsigned int vring_align,
struct virtio_device *vdev,
bool weak_barriers,
void *pages,
void (*notify)(struct virtqueue *),
void (*callback)(struct virtqueue *),
const char *name)
{
struct vring_virtqueue *vq;
unsigned int i;
/* We assume num is a power of 2. */
if (num & (num - 1)) {
dev_warn(&vdev->dev, "Bad virtqueue length %u\n", num);
return NULL;
}
vq = kmalloc(sizeof(*vq) + sizeof(void *)*num, GFP_KERNEL);
if (!vq)
return NULL;
vring_init(&vq->vring, num, pages, vring_align);
vq->vq.callback = callback;
vq->vq.vdev = vdev;
vq->vq.name = name;
vq->notify = notify;
vq->weak_barriers = weak_barriers;
vq->broken = false;
vq->last_used_idx = 0;
vq->num_added = 0;
list_add_tail(&vq->vq.list, &vdev->vqs);
#ifdef DEBUG
vq->in_use = false;
vq->last_add_time_valid = false;
#endif
vq->indirect = virtio_has_feature(vdev, VIRTIO_RING_F_INDIRECT_DESC);
vq->event = virtio_has_feature(vdev, VIRTIO_RING_F_EVENT_IDX);
/* No callback? Tell other side not to bother us. */
if (!callback)
vq->vring.avail->flags |= VRING_AVAIL_F_NO_INTERRUPT;
/* Put everything in free lists. */
vq->num_free = num;
vq->free_head = 0;
for (i = 0; i < num-1; i++) {
vq->vring.desc[i].next = i+1;
vq->data[i] = NULL;
}
vq->data[i] = NULL;
return &vq->vq;
}
EXPORT_SYMBOL_GPL(vring_new_virtqueue);
void vring_del_virtqueue(struct virtqueue *vq)
{
list_del(&vq->list);
kfree(to_vvq(vq));
}
EXPORT_SYMBOL_GPL(vring_del_virtqueue);
/* Manipulates transport-specific feature bits. */
void vring_transport_features(struct virtio_device *vdev)
{
unsigned int i;
for (i = VIRTIO_TRANSPORT_F_START; i < VIRTIO_TRANSPORT_F_END; i++) {
switch (i) {
case VIRTIO_RING_F_INDIRECT_DESC:
break;
case VIRTIO_RING_F_EVENT_IDX:
break;
default:
/* We don't understand this bit. */
clear_bit(i, vdev->features);
}
}
}
EXPORT_SYMBOL_GPL(vring_transport_features);
/**
* virtqueue_get_vring_size - return the size of the virtqueue's vring
* @vq: the struct virtqueue containing the vring of interest.
*
* Returns the size of the vring. This is mainly used for boasting to
* userspace. Unlike other operations, this need not be serialized.
*/
unsigned int virtqueue_get_vring_size(struct virtqueue *_vq)
{
struct vring_virtqueue *vq = to_vvq(_vq);
return vq->vring.num;
}
EXPORT_SYMBOL_GPL(virtqueue_get_vring_size);
MODULE_LICENSE("GPL");