linux-sg2042/drivers/pinctrl
Linus Torvalds 154d6f18a4 This is the bulk of GPIO changes for v3.15:
- Merged in a branch of irqchip changes from Thomas
   Gleixner: we need to have new callbacks from the
   irqchip to determine if the GPIO line will be eligible
   for IRQs, and this callback must be able to say "no".
   After some thinking I got the branch from tglx and
   have switched all current users over to use this.
 
 - Based on tglx patches, we have added some generic
   irqchip helpers in the gpiolib core. These will
   help centralize code when GPIO drivers have simple
   chained/cascaded IRQs. Drivers will still define
   their irqchip vtables, but the gpiolib core will
   take care of irqdomain set-up, mapping from local
   offsets to Linux irqs, and reserve resources by
   marking the GPIO lines for IRQs.
 
 - Initially the PL061 and Nomadik GPIO/pin control
   drivers have been switched over to use the new
   gpiochip-to-irqchip infrastructure with more
   drivers expected for the next kernel cycle. The
   factoring of just two drivers still makes it worth
   it so it is already a win.
 
 - A new driver for the Synopsys DesignWare APB GPIO
   block.
 
 - Modify the DaVinci GPIO driver to be reusable also
   for the new TI Keystone architecture.
 
 - A new driver for the LSI ZEVIO SoCs.
 
 - Delete the obsolte tnetv107x driver.
 
 - Some incremental work on GPIO descriptors: have
   gpiod_direction_output() use a logical level,
   respecting assertion polarity through ACTIVE_LOW
   flags, adding gpiod_direction_output_raw() for the
   case where you want to set that very value. Add
   gpiochip_get_desc() to fetch a GPIO descriptor from
   a specific offset on a certain chip inside driver
   code.
 
 - Switch ACPI GPIO code over to using
   gpiochip_get_desc() and get rid of gpio_to_desc().
 
 - The ACPI GPIO event handling code has been reworked
   after encountering an actual real life implementation.
 
 - Support for ACPI GPIO operation regions.
 
 - Generic GPIO chips can now be assigned labels/names
   from platform data.
 
 - We now clamp values returned from GPIO drivers to
   the boolean [0,1] range.
 
 - Some improved documentation on how to use the polarity
   flag was added.
 
 - The a large slew of incremental driver updates and
   non-critical fixes. Some targeted for stable.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJTPQnkAAoJEEEQszewGV1zyf4P/AmXV0O/FoyeQnXDxDsp7V/t
 JpfD0Gy8FlFmRxjG+UYutRCWUHxFQJU+j0ToVC4/N8clNS1LwA+ZwhNgB8dqRokz
 JVeeqUPn95z2kGe3j9DgVXWMRAytq7y8fXFuNUN36losceuxyOj4mYKLP9Yjnp9l
 4pS1TtQHF95a7qmnyYjGZy8VNcUz1gJ7wJrGxKI+Kl/8pcdA6rPqom6ozCXpZjaD
 5GGQoSvXKIn44+8qZeJsebd1YEso/8K66e9JomcGEsuZl78ArDOzoSllpYF2h/RM
 bo4BFUmoOL3/jVp7FFVbybfolwuRmQesY4NFqx03e+y++hxHFHl90FT+mnednS2Q
 k4lB0o1YRjf2tfMmm4cJ3tVBnFRhssTVb9ynDbzUw61mNVEuxP90f/njrHlObnPT
 1uVVWUE+4ojral213S2IYGHkg1OlWSn0DP6tEaswjOsGJrMdXpdxS5RPwcRtcByT
 HufZRNbUbLzXBzf4WeV2foSS3XqbXYcuMfdRBSWrbuJqW56robbdKKyvrMRPvh7j
 FV7SEK0yFPRe3nuzKM+t9TDGdUt4qivv/YfVeGfCnTVgFOac6cKrHG9gzM58mVcb
 4czG3B1TbqgfGVeZuew4qUdlHSmnSsS+pf/h9Yh9QCHqaKGh3R17cSDxIKAIVTIW
 pH6nuShTXsbrmRMeMhux
 =8Qqf
 -----END PGP SIGNATURE-----

Merge tag 'gpio-v3.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull bulk of gpio updates from Linus Walleij:
 "A pretty big chunk of changes this time, but it has all been on
  rotation in linux-next and had some testing.  Of course there will be
  some amount of fixes on top...

   - Merged in a branch of irqchip changes from Thomas Gleixner: we need
     to have new callbacks from the irqchip to determine if the GPIO
     line will be eligible for IRQs, and this callback must be able to
     say "no".  After some thinking I got the branch from tglx and have
     switched all current users over to use this.

   - Based on tglx patches, we have added some generic irqchip helpers
     in the gpiolib core.  These will help centralize code when GPIO
     drivers have simple chained/cascaded IRQs.  Drivers will still
     define their irqchip vtables, but the gpiolib core will take care
     of irqdomain set-up, mapping from local offsets to Linux irqs, and
     reserve resources by marking the GPIO lines for IRQs.

   - Initially the PL061 and Nomadik GPIO/pin control drivers have been
     switched over to use the new gpiochip-to-irqchip infrastructure
     with more drivers expected for the next kernel cycle.  The
     factoring of just two drivers still makes it worth it so it is
     already a win.

   - A new driver for the Synopsys DesignWare APB GPIO block.

   - Modify the DaVinci GPIO driver to be reusable also for the new TI
     Keystone architecture.

   - A new driver for the LSI ZEVIO SoCs.

   - Delete the obsolte tnetv107x driver.

   - Some incremental work on GPIO descriptors: have
     gpiod_direction_output() use a logical level, respecting assertion
     polarity through ACTIVE_LOW flags, adding gpiod_direction_output_raw()
     for the case where you want to set that very value.  Add
     gpiochip_get_desc() to fetch a GPIO descriptor from a specific
     offset on a certain chip inside driver code.

   - Switch ACPI GPIO code over to using gpiochip_get_desc() and get rid
     of gpio_to_desc().

   - The ACPI GPIO event handling code has been reworked after
     encountering an actual real life implementation.

   - Support for ACPI GPIO operation regions.

   - Generic GPIO chips can now be assigned labels/names from platform
     data.

   - We now clamp values returned from GPIO drivers to the boolean [0,1]
     range.

   - Some improved documentation on how to use the polarity flag was
     added.

   - a large slew of incremental driver updates and non-critical fixes.
     Some targeted for stable"

* tag 'gpio-v3.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (80 commits)
  gpio: rcar: Add helper variable dev = &pdev->dev
  gpio-lynxpoint: force gpio_get() to return "1" and "0" only
  gpio: unmap gpio irqs properly
  pch_gpio: set value before enabling output direction
  gpio: moxart: Actually set output state in moxart_gpio_direction_output()
  gpio: moxart: Avoid forward declaration
  gpio: mxs: Allow for recursive enable_irq_wake() call
  gpio: samsung: Add missing "break" statement
  gpio: twl4030: Remove redundant assignment
  gpio: dwapb: correct gpio-cells in binding document
  gpio: iop: fix devm_ioremap_resource() return value checking
  pinctrl: coh901: convert driver to use gpiolib irqchip
  pinctrl: nomadik: convert driver to use gpiolib irqchip
  gpio: pl061: convert driver to use gpiolib irqchip
  gpio: add IRQ chip helpers in gpiolib
  pinctrl: nomadik: factor in platform data container
  pinctrl: nomadik: rename secondary to latent
  gpio: Driver for SYSCON-based GPIOs
  gpio: generic: Use platform_device_id->driver_data field for driver flags
  pinctrl: coh901: move irq line locking to resource callbacks
  ...
2014-04-03 16:44:15 -07:00
..
mvebu pinctrl: mvebu: silence WARN to dev_warn 2014-03-12 15:00:04 +01:00
sh-pfc Pin control bulk changes for the v3.15 series, no new core 2014-04-01 13:10:49 -07:00
sirf This is the bulk of GPIO changes for v3.15: 2014-04-03 16:44:15 -07:00
spear pinctrl: remove redundant of_match_ptr 2013-10-08 10:02:25 +02:00
vt8500 pinctrl: vt8500: Change devicetree data parsing 2014-02-03 09:08:01 +01:00
Kconfig This is the bulk of GPIO changes for v3.15: 2014-04-03 16:44:15 -07:00
Makefile ARM: pinctrl: Add Broadcom Capri pinctrl driver 2014-01-16 14:25:38 +01:00
core.c pinctrl: do not init debugfs entries for unimplemented functionalities 2014-02-06 13:48:17 +01:00
core.h pinctrl: move subsystem mutex to pinctrl_dev struct 2013-04-26 17:01:35 +02:00
devicetree.c pinctrl: Quiet logging about missing DT nodes when not using DT 2014-02-24 10:44:54 +01:00
devicetree.h pinctrl: core device tree mapping table parsing support 2012-04-18 13:53:10 +02:00
pinconf-generic.c pinctrl: Adds slew-rate, input-enable/disable 2013-12-16 10:55:03 +01:00
pinconf.c pinctrl: pinconf: remove warning: unused variable 'ops' 2013-12-13 13:55:15 +01:00
pinconf.h pinctrl: add function to parse generic pinconfig properties from a dt node 2013-06-16 11:57:32 +02:00
pinctrl-ab8500.c pinctrl: ab8500: Staticize some symbols 2013-04-09 09:54:00 +02:00
pinctrl-ab8505.c pinctrl: ab8505: Staticize some symbols 2013-04-09 09:59:42 +02:00
pinctrl-ab8540.c pinctrl: ab8540: Staticize some symbols 2013-04-09 09:58:02 +02:00
pinctrl-ab9540.c pinctrl: ab9540: Staticize some symbols 2013-04-09 09:55:59 +02:00
pinctrl-abx500.c mfd/pinctrl: Delete platform data header 2014-01-21 08:27:42 +00:00
pinctrl-abx500.h mfd/pinctrl: Delete platform data header 2014-01-21 08:27:42 +00:00
pinctrl-adi2-bf54x.c pinctrl: pinctrl-adi: combine multiple groups of one function together 2014-02-25 10:49:13 +01:00
pinctrl-adi2-bf60x.c pinctrl: pinctrl-adi: combine multiple groups of one function together 2014-02-25 10:49:13 +01:00
pinctrl-adi2.c This is the bulk of GPIO changes for v3.15: 2014-04-03 16:44:15 -07:00
pinctrl-adi2.h pinctrl: pinctrl-adi: combine multiple groups of one function together 2014-02-25 10:49:13 +01:00
pinctrl-as3722.c Bulk pin control changes for the v3.14 cycle: 2014-01-21 10:14:10 -08:00
pinctrl-at91.c pinctrl: at91: implement get_direction 2014-02-25 10:49:15 +01:00
pinctrl-baytrail.c This is the bulk of GPIO changes for v3.15: 2014-04-03 16:44:15 -07:00
pinctrl-bcm2835.c gpio/pinctrl: make gpio_chip members typed boolean 2013-12-04 14:42:46 +01:00
pinctrl-capri.c pinctrl: refer to updated dt binding string. 2014-02-24 20:25:54 -08:00
pinctrl-coh901.c pinctrl: coh901: convert driver to use gpiolib irqchip 2014-03-26 10:31:34 +01:00
pinctrl-coh901.h pinctrl: support pinconfig on the U300 2012-03-12 22:49:03 +01:00
pinctrl-exynos.c pinctrl: exynos: add exynos5260 SoC specific data 2014-02-11 09:35:19 +01:00
pinctrl-exynos.h pinctrl: exynos: Handle suspend/resume of GPIO EINT registers 2013-05-27 15:37:09 +02:00
pinctrl-exynos5440.c pinctrl: remove redundant of_match_ptr 2013-10-08 10:02:25 +02:00
pinctrl-falcon.c pinctrl: Pass all configs to driver on pin_config_set() 2013-08-28 13:34:41 +02:00
pinctrl-imx.c pinctrl: imx: Fix pin name in debug message. 2014-02-25 10:49:14 +01:00
pinctrl-imx.h pinctrl: imx: Use struct type for pins 2013-08-16 14:43:56 +02:00
pinctrl-imx1-core.c pinctrl: imx27: fix offset calculation in imx_read_2bit 2014-02-03 09:08:09 +01:00
pinctrl-imx1.h pinctrl: imx1 core driver 2013-10-29 06:54:37 -07:00
pinctrl-imx6dl.c pinctrl: remove redundant of_match_ptr 2013-10-08 10:02:25 +02:00
pinctrl-imx6q.c pinctrl: remove redundant of_match_ptr 2013-10-08 10:02:25 +02:00
pinctrl-imx6sl.c pinctrl: remove redundant of_match_ptr 2013-10-08 10:02:25 +02:00
pinctrl-imx23.c Drivers: pinctrl: remove __dev* attributes. 2013-01-03 15:57:02 -08:00
pinctrl-imx25.c pinctrl: pinctrl-imx: add imx25 pinctrl driver 2013-11-25 09:08:30 +01:00
pinctrl-imx27.c pinctrl: imx27: imx27 pincontrol driver 2013-10-29 08:58:06 -07:00
pinctrl-imx28.c Drivers: pinctrl: remove __dev* attributes. 2013-01-03 15:57:02 -08:00
pinctrl-imx35.c pinctrl: remove redundant of_match_ptr 2013-10-08 10:02:25 +02:00
pinctrl-imx50.c pinctrl: imx50: add pinctrl support code for the IMX50 SoC 2013-11-06 10:06:59 +01:00
pinctrl-imx51.c pinctrl: remove redundant of_match_ptr 2013-10-08 10:02:25 +02:00
pinctrl-imx53.c pinctrl: remove redundant of_match_ptr 2013-10-08 10:02:25 +02:00
pinctrl-lantiq.c pinctrl/lantiq: Free mapping configs for both pin and groups 2013-05-15 13:28:46 +02:00
pinctrl-lantiq.h pinctrl/lantiq: add output pinconf parameter 2013-02-05 16:17:22 +01:00
pinctrl-msm.c This is the bulk of GPIO changes for v3.15: 2014-04-03 16:44:15 -07:00
pinctrl-msm.h pinctrl: msm: Drop unused includes 2014-03-12 15:12:27 +01:00
pinctrl-msm8x74.c pinctrl: msm: Drop unused includes 2014-03-12 15:12:27 +01:00
pinctrl-mxs.c pinctrl: Pass all configs to driver on pin_config_set() 2013-08-28 13:34:41 +02:00
pinctrl-mxs.h pinctrl: add pinctrl-mxs support 2012-05-02 01:18:27 +02:00
pinctrl-nomadik-db8500.c pinctrl/nomadik-db8500: Fix checkpatch errors 2013-03-27 22:21:32 +01:00
pinctrl-nomadik-db8540.c Drivers: pinctrl: remove __dev* attributes. 2013-01-03 15:57:02 -08:00
pinctrl-nomadik-stn8815.c pinctrl: pinctrl-nomadik-stn8815: Fix checkpatch error 2013-03-13 19:50:20 +01:00
pinctrl-nomadik.c This is the bulk of GPIO changes for v3.15: 2014-04-03 16:44:15 -07:00
pinctrl-nomadik.h pinctrl: nomadik: move platform data handling into driver 2013-11-26 21:01:58 +01:00
pinctrl-palmas.c pinctrl: palmas: remove pin config BIAS_PULL_PIN_DEFAULT support 2013-10-08 13:27:27 +02:00
pinctrl-rockchip.c pinctrl: rockchip: missing unlock on error in rockchip_set_pull() 2013-11-25 09:08:18 +01:00
pinctrl-s3c24xx.c pinctrl: s3c24xx: off by one in s3c24xx_eint_init() 2013-08-28 14:44:25 +02:00
pinctrl-s3c64xx.c pinctrl: s3c64xx: Fix build error caused by undefined chained_irq_enter 2013-04-23 13:59:45 +02:00
pinctrl-samsung.c pinctrl: exynos: add exynos5260 SoC specific data 2014-02-11 09:35:19 +01:00
pinctrl-samsung.h pinctrl: exynos: add exynos5260 SoC specific data 2014-02-11 09:35:19 +01:00
pinctrl-single.c pinctrl: single: add low power mode support 2014-02-10 10:13:08 +01:00
pinctrl-st.c pinctrl: st: Fix error check for of_irq_to_resource usage 2014-03-12 15:53:44 +01:00
pinctrl-sunxi-pins.h pinctrl-sunxi: Fix sun5i-a13 port F multiplexing 2014-02-25 10:49:14 +01:00
pinctrl-sunxi.c pinctrl: sunxi: Fix masking when setting irq type 2014-03-05 09:57:36 +08:00
pinctrl-sunxi.h pinctrl: sunxi: Fix interrupt register offset calculation 2014-03-05 09:57:42 +08:00
pinctrl-tb10x.c pinctrl: tb10x: use module_platform_driver to simplify the code 2013-10-23 10:46:00 +02:00
pinctrl-tegra.c pinctrl: tegra: dynamically calculate function list of groups 2014-03-12 15:23:41 +01:00
pinctrl-tegra.h pinctrl: tegra: dynamically calculate function list of groups 2014-03-12 15:23:41 +01:00
pinctrl-tegra20.c pinctrl: tegra: dynamically calculate function list of groups 2014-03-12 15:23:41 +01:00
pinctrl-tegra30.c pinctrl: tegra: consistency cleanup 2014-03-12 15:27:33 +01:00
pinctrl-tegra114.c pinctrl: tegra: add some missing Tegra114 entries 2014-03-14 16:32:36 +01:00
pinctrl-tegra124.c pinctrl: tegra: fix some mistakes in Tegra124 2014-03-14 16:32:36 +01:00
pinctrl-tz1090-pdc.c pinctrl: Pass all configs to driver on pin_config_set() 2013-08-28 13:34:41 +02:00
pinctrl-tz1090.c pinctrl: Pass all configs to driver on pin_config_set() 2013-08-28 13:34:41 +02:00
pinctrl-u300.c pinctrl: Pass all configs to driver on pin_config_set() 2013-08-28 13:34:41 +02:00
pinctrl-utils.c pinctrl: utils: include export.h to avoid warnings 2013-08-28 15:50:33 +02:00
pinctrl-utils.h pinctrl: add utility functions for add map/configs 2013-08-14 21:00:41 +02:00
pinctrl-vf610.c pinctrl: remove redundant of_match_ptr 2013-10-08 10:02:25 +02:00
pinctrl-xway.c pinctrl/lantiq: fix typo 2014-01-08 10:13:38 +01:00
pinmux.c pinctrl: remove minor dead code 2013-11-04 13:07:05 +01:00
pinmux.h pinctrl: ifdef CONFIG_DEBUG_FS cleanup 2012-04-18 13:53:12 +02:00