1064 lines
24 KiB
C
1064 lines
24 KiB
C
/*
|
|
Driver for Silicon Labs Si2161 DVB-T and Si2165 DVB-C/-T Demodulator
|
|
|
|
Copyright (C) 2013-2014 Matthias Schwarzott <zzam@gentoo.org>
|
|
|
|
This program is free software; you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation; either version 2 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
References:
|
|
http://www.silabs.com/Support%20Documents/TechnicalDocs/Si2165-short.pdf
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/init.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/string.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/firmware.h>
|
|
|
|
#include "dvb_frontend.h"
|
|
#include "dvb_math.h"
|
|
#include "si2165_priv.h"
|
|
#include "si2165.h"
|
|
|
|
/* Hauppauge WinTV-HVR-930C-HD B130 / PCTV QuatroStick 521e 1113xx
|
|
* uses 16 MHz xtal */
|
|
|
|
/* Hauppauge WinTV-HVR-930C-HD B131 / PCTV QuatroStick 522e 1114xx
|
|
* uses 24 MHz clock provided by tuner */
|
|
|
|
struct si2165_state {
|
|
struct i2c_adapter *i2c;
|
|
|
|
struct dvb_frontend frontend;
|
|
|
|
struct si2165_config config;
|
|
|
|
u8 chip_revcode;
|
|
u8 chip_type;
|
|
|
|
/* calculated by xtal and div settings */
|
|
u32 fvco_hz;
|
|
u32 sys_clk;
|
|
u32 adc_clk;
|
|
|
|
bool has_dvbc;
|
|
bool has_dvbt;
|
|
bool firmware_loaded;
|
|
};
|
|
|
|
#define DEBUG_OTHER 0x01
|
|
#define DEBUG_I2C_WRITE 0x02
|
|
#define DEBUG_I2C_READ 0x04
|
|
#define DEBUG_REG_READ 0x08
|
|
#define DEBUG_REG_WRITE 0x10
|
|
#define DEBUG_FW_LOAD 0x20
|
|
|
|
static int debug = 0x00;
|
|
|
|
#define dprintk(args...) \
|
|
do { \
|
|
if (debug & DEBUG_OTHER) \
|
|
printk(KERN_DEBUG "si2165: " args); \
|
|
} while (0)
|
|
|
|
#define deb_i2c_write(args...) \
|
|
do { \
|
|
if (debug & DEBUG_I2C_WRITE) \
|
|
printk(KERN_DEBUG "si2165: i2c write: " args); \
|
|
} while (0)
|
|
|
|
#define deb_i2c_read(args...) \
|
|
do { \
|
|
if (debug & DEBUG_I2C_READ) \
|
|
printk(KERN_DEBUG "si2165: i2c read: " args); \
|
|
} while (0)
|
|
|
|
#define deb_readreg(args...) \
|
|
do { \
|
|
if (debug & DEBUG_REG_READ) \
|
|
printk(KERN_DEBUG "si2165: reg read: " args); \
|
|
} while (0)
|
|
|
|
#define deb_writereg(args...) \
|
|
do { \
|
|
if (debug & DEBUG_REG_WRITE) \
|
|
printk(KERN_DEBUG "si2165: reg write: " args); \
|
|
} while (0)
|
|
|
|
#define deb_fw_load(args...) \
|
|
do { \
|
|
if (debug & DEBUG_FW_LOAD) \
|
|
printk(KERN_DEBUG "si2165: fw load: " args); \
|
|
} while (0)
|
|
|
|
static int si2165_write(struct si2165_state *state, const u16 reg,
|
|
const u8 *src, const int count)
|
|
{
|
|
int ret;
|
|
struct i2c_msg msg;
|
|
u8 buf[2 + 4]; /* write a maximum of 4 bytes of data */
|
|
|
|
if (count + 2 > sizeof(buf)) {
|
|
dev_warn(&state->i2c->dev,
|
|
"%s: i2c wr reg=%04x: count=%d is too big!\n",
|
|
KBUILD_MODNAME, reg, count);
|
|
return -EINVAL;
|
|
}
|
|
buf[0] = reg >> 8;
|
|
buf[1] = reg & 0xff;
|
|
memcpy(buf + 2, src, count);
|
|
|
|
msg.addr = state->config.i2c_addr;
|
|
msg.flags = 0;
|
|
msg.buf = buf;
|
|
msg.len = count + 2;
|
|
|
|
if (debug & DEBUG_I2C_WRITE)
|
|
deb_i2c_write("reg: 0x%04x, data: %*ph\n", reg, count, src);
|
|
|
|
ret = i2c_transfer(state->i2c, &msg, 1);
|
|
|
|
if (ret != 1) {
|
|
dev_err(&state->i2c->dev, "%s: ret == %d\n", __func__, ret);
|
|
if (ret < 0)
|
|
return ret;
|
|
else
|
|
return -EREMOTEIO;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int si2165_read(struct si2165_state *state,
|
|
const u16 reg, u8 *val, const int count)
|
|
{
|
|
int ret;
|
|
u8 reg_buf[] = { reg >> 8, reg & 0xff };
|
|
struct i2c_msg msg[] = {
|
|
{ .addr = state->config.i2c_addr,
|
|
.flags = 0, .buf = reg_buf, .len = 2 },
|
|
{ .addr = state->config.i2c_addr,
|
|
.flags = I2C_M_RD, .buf = val, .len = count },
|
|
};
|
|
|
|
ret = i2c_transfer(state->i2c, msg, 2);
|
|
|
|
if (ret != 2) {
|
|
dev_err(&state->i2c->dev, "%s: error (addr %02x reg %04x error (ret == %i)\n",
|
|
__func__, state->config.i2c_addr, reg, ret);
|
|
if (ret < 0)
|
|
return ret;
|
|
else
|
|
return -EREMOTEIO;
|
|
}
|
|
|
|
if (debug & DEBUG_I2C_READ)
|
|
deb_i2c_read("reg: 0x%04x, data: %*ph\n", reg, count, val);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int si2165_readreg8(struct si2165_state *state,
|
|
const u16 reg, u8 *val)
|
|
{
|
|
int ret;
|
|
|
|
ret = si2165_read(state, reg, val, 1);
|
|
deb_readreg("R(0x%04x)=0x%02x\n", reg, *val);
|
|
return ret;
|
|
}
|
|
|
|
static int si2165_readreg16(struct si2165_state *state,
|
|
const u16 reg, u16 *val)
|
|
{
|
|
u8 buf[2];
|
|
|
|
int ret = si2165_read(state, reg, buf, 2);
|
|
*val = buf[0] | buf[1] << 8;
|
|
deb_readreg("R(0x%04x)=0x%04x\n", reg, *val);
|
|
return ret;
|
|
}
|
|
|
|
static int si2165_writereg8(struct si2165_state *state, const u16 reg, u8 val)
|
|
{
|
|
return si2165_write(state, reg, &val, 1);
|
|
}
|
|
|
|
static int si2165_writereg16(struct si2165_state *state, const u16 reg, u16 val)
|
|
{
|
|
u8 buf[2] = { val & 0xff, (val >> 8) & 0xff };
|
|
|
|
return si2165_write(state, reg, buf, 2);
|
|
}
|
|
|
|
static int si2165_writereg24(struct si2165_state *state, const u16 reg, u32 val)
|
|
{
|
|
u8 buf[3] = { val & 0xff, (val >> 8) & 0xff, (val >> 16) & 0xff };
|
|
|
|
return si2165_write(state, reg, buf, 3);
|
|
}
|
|
|
|
static int si2165_writereg32(struct si2165_state *state, const u16 reg, u32 val)
|
|
{
|
|
u8 buf[4] = {
|
|
val & 0xff,
|
|
(val >> 8) & 0xff,
|
|
(val >> 16) & 0xff,
|
|
(val >> 24) & 0xff
|
|
};
|
|
return si2165_write(state, reg, buf, 4);
|
|
}
|
|
|
|
static int si2165_writereg_mask8(struct si2165_state *state, const u16 reg,
|
|
u8 val, u8 mask)
|
|
{
|
|
int ret;
|
|
u8 tmp;
|
|
|
|
if (mask != 0xff) {
|
|
ret = si2165_readreg8(state, reg, &tmp);
|
|
if (ret < 0)
|
|
goto err;
|
|
|
|
val &= mask;
|
|
tmp &= ~mask;
|
|
val |= tmp;
|
|
}
|
|
|
|
ret = si2165_writereg8(state, reg, val);
|
|
err:
|
|
return ret;
|
|
}
|
|
|
|
static int si2165_get_tune_settings(struct dvb_frontend *fe,
|
|
struct dvb_frontend_tune_settings *s)
|
|
{
|
|
s->min_delay_ms = 1000;
|
|
return 0;
|
|
}
|
|
|
|
static int si2165_init_pll(struct si2165_state *state)
|
|
{
|
|
u32 ref_freq_Hz = state->config.ref_freq_Hz;
|
|
u8 divr = 1; /* 1..7 */
|
|
u8 divp = 1; /* only 1 or 4 */
|
|
u8 divn = 56; /* 1..63 */
|
|
u8 divm = 8;
|
|
u8 divl = 12;
|
|
u8 buf[4];
|
|
|
|
/* hardcoded values can be deleted if calculation is verified
|
|
* or it yields the same values as the windows driver */
|
|
switch (ref_freq_Hz) {
|
|
case 16000000u:
|
|
divn = 56;
|
|
break;
|
|
case 24000000u:
|
|
divr = 2;
|
|
divp = 4;
|
|
divn = 19;
|
|
break;
|
|
default:
|
|
/* ref_freq / divr must be between 4 and 16 MHz */
|
|
if (ref_freq_Hz > 16000000u)
|
|
divr = 2;
|
|
|
|
/* now select divn and divp such that
|
|
* fvco is in 1624..1824 MHz */
|
|
if (1624000000u * divr > ref_freq_Hz * 2u * 63u)
|
|
divp = 4;
|
|
|
|
/* is this already correct regarding rounding? */
|
|
divn = 1624000000u * divr / (ref_freq_Hz * 2u * divp);
|
|
break;
|
|
}
|
|
|
|
/* adc_clk and sys_clk depend on xtal and pll settings */
|
|
state->fvco_hz = ref_freq_Hz / divr
|
|
* 2u * divn * divp;
|
|
state->adc_clk = state->fvco_hz / (divm * 4u);
|
|
state->sys_clk = state->fvco_hz / (divl * 2u);
|
|
|
|
/* write pll registers 0x00a0..0x00a3 at once */
|
|
buf[0] = divl;
|
|
buf[1] = divm;
|
|
buf[2] = (divn & 0x3f) | ((divp == 1) ? 0x40 : 0x00) | 0x80;
|
|
buf[3] = divr;
|
|
return si2165_write(state, 0x00a0, buf, 4);
|
|
}
|
|
|
|
static int si2165_adjust_pll_divl(struct si2165_state *state, u8 divl)
|
|
{
|
|
state->sys_clk = state->fvco_hz / (divl * 2u);
|
|
return si2165_writereg8(state, 0x00a0, divl); /* pll_divl */
|
|
}
|
|
|
|
static u32 si2165_get_fe_clk(struct si2165_state *state)
|
|
{
|
|
/* assume Oversampling mode Ovr4 is used */
|
|
return state->adc_clk;
|
|
}
|
|
|
|
static int si2165_wait_init_done(struct si2165_state *state)
|
|
{
|
|
int ret = -EINVAL;
|
|
u8 val = 0;
|
|
int i;
|
|
|
|
for (i = 0; i < 3; ++i) {
|
|
si2165_readreg8(state, 0x0054, &val);
|
|
if (val == 0x01)
|
|
return 0;
|
|
usleep_range(1000, 50000);
|
|
}
|
|
dev_err(&state->i2c->dev, "%s: init_done was not set\n",
|
|
KBUILD_MODNAME);
|
|
return ret;
|
|
}
|
|
|
|
static int si2165_upload_firmware_block(struct si2165_state *state,
|
|
const u8 *data, u32 len, u32 *poffset, u32 block_count)
|
|
{
|
|
int ret;
|
|
u8 buf_ctrl[4] = { 0x00, 0x00, 0x00, 0xc0 };
|
|
u8 wordcount;
|
|
u32 cur_block = 0;
|
|
u32 offset = poffset ? *poffset : 0;
|
|
|
|
if (len < 4)
|
|
return -EINVAL;
|
|
if (len % 4 != 0)
|
|
return -EINVAL;
|
|
|
|
deb_fw_load("si2165_upload_firmware_block called with len=0x%x offset=0x%x blockcount=0x%x\n",
|
|
len, offset, block_count);
|
|
while (offset+12 <= len && cur_block < block_count) {
|
|
deb_fw_load("si2165_upload_firmware_block in while len=0x%x offset=0x%x cur_block=0x%x blockcount=0x%x\n",
|
|
len, offset, cur_block, block_count);
|
|
wordcount = data[offset];
|
|
if (wordcount < 1 || data[offset+1] ||
|
|
data[offset+2] || data[offset+3]) {
|
|
dev_warn(&state->i2c->dev,
|
|
"%s: bad fw data[0..3] = %*ph\n",
|
|
KBUILD_MODNAME, 4, data);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (offset + 8 + wordcount * 4 > len) {
|
|
dev_warn(&state->i2c->dev,
|
|
"%s: len is too small for block len=%d, wordcount=%d\n",
|
|
KBUILD_MODNAME, len, wordcount);
|
|
return -EINVAL;
|
|
}
|
|
|
|
buf_ctrl[0] = wordcount - 1;
|
|
|
|
ret = si2165_write(state, 0x0364, buf_ctrl, 4);
|
|
if (ret < 0)
|
|
goto error;
|
|
ret = si2165_write(state, 0x0368, data+offset+4, 4);
|
|
if (ret < 0)
|
|
goto error;
|
|
|
|
offset += 8;
|
|
|
|
while (wordcount > 0) {
|
|
ret = si2165_write(state, 0x36c, data+offset, 4);
|
|
if (ret < 0)
|
|
goto error;
|
|
wordcount--;
|
|
offset += 4;
|
|
}
|
|
cur_block++;
|
|
}
|
|
|
|
deb_fw_load("si2165_upload_firmware_block after while len=0x%x offset=0x%x cur_block=0x%x blockcount=0x%x\n",
|
|
len, offset, cur_block, block_count);
|
|
|
|
if (poffset)
|
|
*poffset = offset;
|
|
|
|
deb_fw_load("si2165_upload_firmware_block returned offset=0x%x\n",
|
|
offset);
|
|
|
|
return 0;
|
|
error:
|
|
return ret;
|
|
}
|
|
|
|
static int si2165_upload_firmware(struct si2165_state *state)
|
|
{
|
|
/* int ret; */
|
|
u8 val[3];
|
|
u16 val16;
|
|
int ret;
|
|
|
|
const struct firmware *fw = NULL;
|
|
u8 *fw_file;
|
|
const u8 *data;
|
|
u32 len;
|
|
u32 offset;
|
|
u8 patch_version;
|
|
u8 block_count;
|
|
u16 crc_expected;
|
|
|
|
switch (state->chip_revcode) {
|
|
case 0x03: /* revision D */
|
|
fw_file = SI2165_FIRMWARE_REV_D;
|
|
break;
|
|
default:
|
|
dev_info(&state->i2c->dev, "%s: no firmware file for revision=%d\n",
|
|
KBUILD_MODNAME, state->chip_revcode);
|
|
return 0;
|
|
}
|
|
|
|
/* request the firmware, this will block and timeout */
|
|
ret = request_firmware(&fw, fw_file, state->i2c->dev.parent);
|
|
if (ret) {
|
|
dev_warn(&state->i2c->dev, "%s: firmware file '%s' not found\n",
|
|
KBUILD_MODNAME, fw_file);
|
|
goto error;
|
|
}
|
|
|
|
data = fw->data;
|
|
len = fw->size;
|
|
|
|
dev_info(&state->i2c->dev, "%s: downloading firmware from file '%s' size=%d\n",
|
|
KBUILD_MODNAME, fw_file, len);
|
|
|
|
if (len % 4 != 0) {
|
|
dev_warn(&state->i2c->dev, "%s: firmware size is not multiple of 4\n",
|
|
KBUILD_MODNAME);
|
|
ret = -EINVAL;
|
|
goto error;
|
|
}
|
|
|
|
/* check header (8 bytes) */
|
|
if (len < 8) {
|
|
dev_warn(&state->i2c->dev, "%s: firmware header is missing\n",
|
|
KBUILD_MODNAME);
|
|
ret = -EINVAL;
|
|
goto error;
|
|
}
|
|
|
|
if (data[0] != 1 || data[1] != 0) {
|
|
dev_warn(&state->i2c->dev, "%s: firmware file version is wrong\n",
|
|
KBUILD_MODNAME);
|
|
ret = -EINVAL;
|
|
goto error;
|
|
}
|
|
|
|
patch_version = data[2];
|
|
block_count = data[4];
|
|
crc_expected = data[7] << 8 | data[6];
|
|
|
|
/* start uploading fw */
|
|
/* boot/wdog status */
|
|
ret = si2165_writereg8(state, 0x0341, 0x00);
|
|
if (ret < 0)
|
|
goto error;
|
|
/* reset */
|
|
ret = si2165_writereg8(state, 0x00c0, 0x00);
|
|
if (ret < 0)
|
|
goto error;
|
|
/* boot/wdog status */
|
|
ret = si2165_readreg8(state, 0x0341, val);
|
|
if (ret < 0)
|
|
goto error;
|
|
|
|
/* enable reset on error */
|
|
ret = si2165_readreg8(state, 0x035c, val);
|
|
if (ret < 0)
|
|
goto error;
|
|
ret = si2165_readreg8(state, 0x035c, val);
|
|
if (ret < 0)
|
|
goto error;
|
|
ret = si2165_writereg8(state, 0x035c, 0x02);
|
|
if (ret < 0)
|
|
goto error;
|
|
|
|
/* start right after the header */
|
|
offset = 8;
|
|
|
|
dev_info(&state->i2c->dev, "%s: si2165_upload_firmware extracted patch_version=0x%02x, block_count=0x%02x, crc_expected=0x%04x\n",
|
|
KBUILD_MODNAME, patch_version, block_count, crc_expected);
|
|
|
|
ret = si2165_upload_firmware_block(state, data, len, &offset, 1);
|
|
if (ret < 0)
|
|
goto error;
|
|
|
|
ret = si2165_writereg8(state, 0x0344, patch_version);
|
|
if (ret < 0)
|
|
goto error;
|
|
|
|
/* reset crc */
|
|
ret = si2165_writereg8(state, 0x0379, 0x01);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = si2165_upload_firmware_block(state, data, len,
|
|
&offset, block_count);
|
|
if (ret < 0) {
|
|
dev_err(&state->i2c->dev,
|
|
"%s: firmare could not be uploaded\n",
|
|
KBUILD_MODNAME);
|
|
goto error;
|
|
}
|
|
|
|
/* read crc */
|
|
ret = si2165_readreg16(state, 0x037a, &val16);
|
|
if (ret)
|
|
goto error;
|
|
|
|
if (val16 != crc_expected) {
|
|
dev_err(&state->i2c->dev,
|
|
"%s: firmware crc mismatch %04x != %04x\n",
|
|
KBUILD_MODNAME, val16, crc_expected);
|
|
ret = -EINVAL;
|
|
goto error;
|
|
}
|
|
|
|
ret = si2165_upload_firmware_block(state, data, len, &offset, 5);
|
|
if (ret)
|
|
goto error;
|
|
|
|
if (len != offset) {
|
|
dev_err(&state->i2c->dev,
|
|
"%s: firmare len mismatch %04x != %04x\n",
|
|
KBUILD_MODNAME, len, offset);
|
|
ret = -EINVAL;
|
|
goto error;
|
|
}
|
|
|
|
/* reset watchdog error register */
|
|
ret = si2165_writereg_mask8(state, 0x0341, 0x02, 0x02);
|
|
if (ret < 0)
|
|
goto error;
|
|
|
|
/* enable reset on error */
|
|
ret = si2165_writereg_mask8(state, 0x035c, 0x01, 0x01);
|
|
if (ret < 0)
|
|
goto error;
|
|
|
|
dev_info(&state->i2c->dev, "%s: fw load finished\n", KBUILD_MODNAME);
|
|
|
|
ret = 0;
|
|
state->firmware_loaded = true;
|
|
error:
|
|
if (fw) {
|
|
release_firmware(fw);
|
|
fw = NULL;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int si2165_init(struct dvb_frontend *fe)
|
|
{
|
|
int ret = 0;
|
|
struct si2165_state *state = fe->demodulator_priv;
|
|
u8 val;
|
|
u8 patch_version = 0x00;
|
|
|
|
dprintk("%s: called\n", __func__);
|
|
|
|
/* powerup */
|
|
ret = si2165_writereg8(state, 0x0000, state->config.chip_mode);
|
|
if (ret < 0)
|
|
goto error;
|
|
/* dsp_clock_enable */
|
|
ret = si2165_writereg8(state, 0x0104, 0x01);
|
|
if (ret < 0)
|
|
goto error;
|
|
ret = si2165_readreg8(state, 0x0000, &val); /* verify chip_mode */
|
|
if (ret < 0)
|
|
goto error;
|
|
if (val != state->config.chip_mode) {
|
|
dev_err(&state->i2c->dev, "%s: could not set chip_mode\n",
|
|
KBUILD_MODNAME);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* agc */
|
|
ret = si2165_writereg8(state, 0x018b, 0x00);
|
|
if (ret < 0)
|
|
goto error;
|
|
ret = si2165_writereg8(state, 0x0190, 0x01);
|
|
if (ret < 0)
|
|
goto error;
|
|
ret = si2165_writereg8(state, 0x0170, 0x00);
|
|
if (ret < 0)
|
|
goto error;
|
|
ret = si2165_writereg8(state, 0x0171, 0x07);
|
|
if (ret < 0)
|
|
goto error;
|
|
/* rssi pad */
|
|
ret = si2165_writereg8(state, 0x0646, 0x00);
|
|
if (ret < 0)
|
|
goto error;
|
|
ret = si2165_writereg8(state, 0x0641, 0x00);
|
|
if (ret < 0)
|
|
goto error;
|
|
|
|
ret = si2165_init_pll(state);
|
|
if (ret < 0)
|
|
goto error;
|
|
|
|
/* enable chip_init */
|
|
ret = si2165_writereg8(state, 0x0050, 0x01);
|
|
if (ret < 0)
|
|
goto error;
|
|
/* set start_init */
|
|
ret = si2165_writereg8(state, 0x0096, 0x01);
|
|
if (ret < 0)
|
|
goto error;
|
|
ret = si2165_wait_init_done(state);
|
|
if (ret < 0)
|
|
goto error;
|
|
|
|
/* disable chip_init */
|
|
ret = si2165_writereg8(state, 0x0050, 0x00);
|
|
if (ret < 0)
|
|
goto error;
|
|
|
|
/* ber_pkt */
|
|
ret = si2165_writereg16(state, 0x0470 , 0x7530);
|
|
if (ret < 0)
|
|
goto error;
|
|
|
|
ret = si2165_readreg8(state, 0x0344, &patch_version);
|
|
if (ret < 0)
|
|
goto error;
|
|
|
|
ret = si2165_writereg8(state, 0x00cb, 0x00);
|
|
if (ret < 0)
|
|
goto error;
|
|
|
|
/* dsp_addr_jump */
|
|
ret = si2165_writereg32(state, 0x0348, 0xf4000000);
|
|
if (ret < 0)
|
|
goto error;
|
|
/* boot/wdog status */
|
|
ret = si2165_readreg8(state, 0x0341, &val);
|
|
if (ret < 0)
|
|
goto error;
|
|
|
|
if (patch_version == 0x00) {
|
|
ret = si2165_upload_firmware(state);
|
|
if (ret < 0)
|
|
goto error;
|
|
}
|
|
|
|
/* write adc values after each reset*/
|
|
ret = si2165_writereg8(state, 0x012a, 0x46);
|
|
if (ret < 0)
|
|
goto error;
|
|
ret = si2165_writereg8(state, 0x012c, 0x00);
|
|
if (ret < 0)
|
|
goto error;
|
|
ret = si2165_writereg8(state, 0x012e, 0x0a);
|
|
if (ret < 0)
|
|
goto error;
|
|
ret = si2165_writereg8(state, 0x012f, 0xff);
|
|
if (ret < 0)
|
|
goto error;
|
|
ret = si2165_writereg8(state, 0x0123, 0x70);
|
|
if (ret < 0)
|
|
goto error;
|
|
|
|
return 0;
|
|
error:
|
|
return ret;
|
|
}
|
|
|
|
static int si2165_sleep(struct dvb_frontend *fe)
|
|
{
|
|
int ret;
|
|
struct si2165_state *state = fe->demodulator_priv;
|
|
|
|
/* dsp clock disable */
|
|
ret = si2165_writereg8(state, 0x0104, 0x00);
|
|
if (ret < 0)
|
|
return ret;
|
|
/* chip mode */
|
|
ret = si2165_writereg8(state, 0x0000, SI2165_MODE_OFF);
|
|
if (ret < 0)
|
|
return ret;
|
|
return 0;
|
|
}
|
|
|
|
static int si2165_read_status(struct dvb_frontend *fe, fe_status_t *status)
|
|
{
|
|
int ret;
|
|
u8 fec_lock = 0;
|
|
struct si2165_state *state = fe->demodulator_priv;
|
|
|
|
if (!state->has_dvbt)
|
|
return -EINVAL;
|
|
|
|
/* check fec_lock */
|
|
ret = si2165_readreg8(state, 0x4e0, &fec_lock);
|
|
if (ret < 0)
|
|
return ret;
|
|
*status = 0;
|
|
if (fec_lock & 0x01) {
|
|
*status |= FE_HAS_SIGNAL;
|
|
*status |= FE_HAS_CARRIER;
|
|
*status |= FE_HAS_VITERBI;
|
|
*status |= FE_HAS_SYNC;
|
|
*status |= FE_HAS_LOCK;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int si2165_set_oversamp(struct si2165_state *state, u32 dvb_rate)
|
|
{
|
|
u64 oversamp;
|
|
u32 reg_value;
|
|
|
|
oversamp = si2165_get_fe_clk(state);
|
|
oversamp <<= 23;
|
|
do_div(oversamp, dvb_rate);
|
|
reg_value = oversamp & 0x3fffffff;
|
|
|
|
/* oversamp, usbdump contained 0x03100000; */
|
|
return si2165_writereg32(state, 0x00e4, reg_value);
|
|
}
|
|
|
|
static int si2165_set_if_freq_shift(struct si2165_state *state, u32 IF)
|
|
{
|
|
u64 if_freq_shift;
|
|
s32 reg_value = 0;
|
|
u32 fe_clk = si2165_get_fe_clk(state);
|
|
|
|
if_freq_shift = IF;
|
|
if_freq_shift <<= 29;
|
|
|
|
do_div(if_freq_shift, fe_clk);
|
|
reg_value = (s32)if_freq_shift;
|
|
|
|
if (state->config.inversion)
|
|
reg_value = -reg_value;
|
|
|
|
reg_value = reg_value & 0x1fffffff;
|
|
|
|
/* if_freq_shift, usbdump contained 0x023ee08f; */
|
|
return si2165_writereg32(state, 0x00e8, reg_value);
|
|
}
|
|
|
|
static int si2165_set_parameters(struct dvb_frontend *fe)
|
|
{
|
|
int ret;
|
|
struct dtv_frontend_properties *p = &fe->dtv_property_cache;
|
|
struct si2165_state *state = fe->demodulator_priv;
|
|
u8 val[3];
|
|
u32 IF;
|
|
u32 dvb_rate = 0;
|
|
u16 bw10k;
|
|
|
|
dprintk("%s: called\n", __func__);
|
|
|
|
if (!fe->ops.tuner_ops.get_if_frequency) {
|
|
dev_err(&state->i2c->dev,
|
|
"%s: Error: get_if_frequency() not defined at tuner. Can't work without it!\n",
|
|
KBUILD_MODNAME);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (!state->has_dvbt)
|
|
return -EINVAL;
|
|
|
|
if (p->bandwidth_hz > 0) {
|
|
dvb_rate = p->bandwidth_hz * 8 / 7;
|
|
bw10k = p->bandwidth_hz / 10000;
|
|
} else {
|
|
dvb_rate = 8 * 8 / 7;
|
|
bw10k = 800;
|
|
}
|
|
|
|
/* standard = DVB-T */
|
|
ret = si2165_writereg8(state, 0x00ec, 0x01);
|
|
if (ret < 0)
|
|
return ret;
|
|
ret = si2165_adjust_pll_divl(state, 12);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
fe->ops.tuner_ops.get_if_frequency(fe, &IF);
|
|
ret = si2165_set_if_freq_shift(state, IF);
|
|
if (ret < 0)
|
|
return ret;
|
|
ret = si2165_writereg8(state, 0x08f8, 0x00);
|
|
if (ret < 0)
|
|
return ret;
|
|
/* ts output config */
|
|
ret = si2165_writereg8(state, 0x04e4, 0x20);
|
|
if (ret < 0)
|
|
return ret;
|
|
ret = si2165_writereg16(state, 0x04ef, 0x00fe);
|
|
if (ret < 0)
|
|
return ret;
|
|
ret = si2165_writereg24(state, 0x04f4, 0x555555);
|
|
if (ret < 0)
|
|
return ret;
|
|
ret = si2165_writereg8(state, 0x04e5, 0x01);
|
|
if (ret < 0)
|
|
return ret;
|
|
/* bandwidth in 10KHz steps */
|
|
ret = si2165_writereg16(state, 0x0308, bw10k);
|
|
if (ret < 0)
|
|
return ret;
|
|
ret = si2165_set_oversamp(state, dvb_rate);
|
|
if (ret < 0)
|
|
return ret;
|
|
/* impulsive_noise_remover */
|
|
ret = si2165_writereg8(state, 0x031c, 0x01);
|
|
if (ret < 0)
|
|
return ret;
|
|
ret = si2165_writereg8(state, 0x00cb, 0x00);
|
|
if (ret < 0)
|
|
return ret;
|
|
/* agc2 */
|
|
ret = si2165_writereg8(state, 0x016e, 0x41);
|
|
if (ret < 0)
|
|
return ret;
|
|
ret = si2165_writereg8(state, 0x016c, 0x0e);
|
|
if (ret < 0)
|
|
return ret;
|
|
ret = si2165_writereg8(state, 0x016d, 0x10);
|
|
if (ret < 0)
|
|
return ret;
|
|
/* agc */
|
|
ret = si2165_writereg8(state, 0x015b, 0x03);
|
|
if (ret < 0)
|
|
return ret;
|
|
ret = si2165_writereg8(state, 0x0150, 0x78);
|
|
if (ret < 0)
|
|
return ret;
|
|
/* agc */
|
|
ret = si2165_writereg8(state, 0x01a0, 0x78);
|
|
if (ret < 0)
|
|
return ret;
|
|
ret = si2165_writereg8(state, 0x01c8, 0x68);
|
|
if (ret < 0)
|
|
return ret;
|
|
/* freq_sync_range */
|
|
ret = si2165_writereg16(state, 0x030c, 0x0064);
|
|
if (ret < 0)
|
|
return ret;
|
|
/* gp_reg0 */
|
|
ret = si2165_readreg8(state, 0x0387, val);
|
|
if (ret < 0)
|
|
return ret;
|
|
ret = si2165_writereg8(state, 0x0387, 0x00);
|
|
if (ret < 0)
|
|
return ret;
|
|
/* dsp_addr_jump */
|
|
ret = si2165_writereg32(state, 0x0348, 0xf4000000);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
if (fe->ops.tuner_ops.set_params)
|
|
fe->ops.tuner_ops.set_params(fe);
|
|
|
|
/* recalc if_freq_shift if IF might has changed */
|
|
fe->ops.tuner_ops.get_if_frequency(fe, &IF);
|
|
ret = si2165_set_if_freq_shift(state, IF);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* boot/wdog status */
|
|
ret = si2165_readreg8(state, 0x0341, val);
|
|
if (ret < 0)
|
|
return ret;
|
|
ret = si2165_writereg8(state, 0x0341, 0x00);
|
|
if (ret < 0)
|
|
return ret;
|
|
/* reset all */
|
|
ret = si2165_writereg8(state, 0x00c0, 0x00);
|
|
if (ret < 0)
|
|
return ret;
|
|
/* gp_reg0 */
|
|
ret = si2165_writereg32(state, 0x0384, 0x00000000);
|
|
if (ret < 0)
|
|
return ret;
|
|
/* start_synchro */
|
|
ret = si2165_writereg8(state, 0x02e0, 0x01);
|
|
if (ret < 0)
|
|
return ret;
|
|
/* boot/wdog status */
|
|
ret = si2165_readreg8(state, 0x0341, val);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void si2165_release(struct dvb_frontend *fe)
|
|
{
|
|
struct si2165_state *state = fe->demodulator_priv;
|
|
|
|
dprintk("%s: called\n", __func__);
|
|
kfree(state);
|
|
}
|
|
|
|
static struct dvb_frontend_ops si2165_ops = {
|
|
.info = {
|
|
.name = "Silicon Labs ",
|
|
.caps = FE_CAN_FEC_1_2 |
|
|
FE_CAN_FEC_2_3 |
|
|
FE_CAN_FEC_3_4 |
|
|
FE_CAN_FEC_5_6 |
|
|
FE_CAN_FEC_7_8 |
|
|
FE_CAN_FEC_AUTO |
|
|
FE_CAN_QPSK |
|
|
FE_CAN_QAM_16 |
|
|
FE_CAN_QAM_32 |
|
|
FE_CAN_QAM_64 |
|
|
FE_CAN_QAM_128 |
|
|
FE_CAN_QAM_256 |
|
|
FE_CAN_QAM_AUTO |
|
|
FE_CAN_TRANSMISSION_MODE_AUTO |
|
|
FE_CAN_GUARD_INTERVAL_AUTO |
|
|
FE_CAN_HIERARCHY_AUTO |
|
|
FE_CAN_MUTE_TS |
|
|
FE_CAN_TRANSMISSION_MODE_AUTO |
|
|
FE_CAN_RECOVER
|
|
},
|
|
|
|
.get_tune_settings = si2165_get_tune_settings,
|
|
|
|
.init = si2165_init,
|
|
.sleep = si2165_sleep,
|
|
|
|
.set_frontend = si2165_set_parameters,
|
|
.read_status = si2165_read_status,
|
|
|
|
.release = si2165_release,
|
|
};
|
|
|
|
struct dvb_frontend *si2165_attach(const struct si2165_config *config,
|
|
struct i2c_adapter *i2c)
|
|
{
|
|
struct si2165_state *state = NULL;
|
|
int n;
|
|
int io_ret;
|
|
u8 val;
|
|
char rev_char;
|
|
const char *chip_name;
|
|
|
|
if (config == NULL || i2c == NULL)
|
|
goto error;
|
|
|
|
/* allocate memory for the internal state */
|
|
state = kzalloc(sizeof(struct si2165_state), GFP_KERNEL);
|
|
if (state == NULL)
|
|
goto error;
|
|
|
|
/* setup the state */
|
|
state->i2c = i2c;
|
|
state->config = *config;
|
|
|
|
if (state->config.ref_freq_Hz < 4000000
|
|
|| state->config.ref_freq_Hz > 27000000) {
|
|
dev_err(&state->i2c->dev, "%s: ref_freq of %d Hz not supported by this driver\n",
|
|
KBUILD_MODNAME, state->config.ref_freq_Hz);
|
|
goto error;
|
|
}
|
|
|
|
/* create dvb_frontend */
|
|
memcpy(&state->frontend.ops, &si2165_ops,
|
|
sizeof(struct dvb_frontend_ops));
|
|
state->frontend.demodulator_priv = state;
|
|
|
|
/* powerup */
|
|
io_ret = si2165_writereg8(state, 0x0000, state->config.chip_mode);
|
|
if (io_ret < 0)
|
|
goto error;
|
|
|
|
io_ret = si2165_readreg8(state, 0x0000, &val);
|
|
if (io_ret < 0)
|
|
goto error;
|
|
if (val != state->config.chip_mode)
|
|
goto error;
|
|
|
|
io_ret = si2165_readreg8(state, 0x0023, &state->chip_revcode);
|
|
if (io_ret < 0)
|
|
goto error;
|
|
|
|
io_ret = si2165_readreg8(state, 0x0118, &state->chip_type);
|
|
if (io_ret < 0)
|
|
goto error;
|
|
|
|
/* powerdown */
|
|
io_ret = si2165_writereg8(state, 0x0000, SI2165_MODE_OFF);
|
|
if (io_ret < 0)
|
|
goto error;
|
|
|
|
if (state->chip_revcode < 26)
|
|
rev_char = 'A' + state->chip_revcode;
|
|
else
|
|
rev_char = '?';
|
|
|
|
switch (state->chip_type) {
|
|
case 0x06:
|
|
chip_name = "Si2161";
|
|
state->has_dvbt = true;
|
|
break;
|
|
case 0x07:
|
|
chip_name = "Si2165";
|
|
state->has_dvbt = true;
|
|
state->has_dvbc = true;
|
|
break;
|
|
default:
|
|
dev_err(&state->i2c->dev, "%s: Unsupported Silicon Labs chip (type %d, rev %d)\n",
|
|
KBUILD_MODNAME, state->chip_type, state->chip_revcode);
|
|
goto error;
|
|
}
|
|
|
|
dev_info(&state->i2c->dev,
|
|
"%s: Detected Silicon Labs %s-%c (type %d, rev %d)\n",
|
|
KBUILD_MODNAME, chip_name, rev_char, state->chip_type,
|
|
state->chip_revcode);
|
|
|
|
strlcat(state->frontend.ops.info.name, chip_name,
|
|
sizeof(state->frontend.ops.info.name));
|
|
|
|
n = 0;
|
|
if (state->has_dvbt) {
|
|
state->frontend.ops.delsys[n++] = SYS_DVBT;
|
|
strlcat(state->frontend.ops.info.name, " DVB-T",
|
|
sizeof(state->frontend.ops.info.name));
|
|
}
|
|
if (state->has_dvbc)
|
|
dev_warn(&state->i2c->dev, "%s: DVB-C is not yet supported.\n",
|
|
KBUILD_MODNAME);
|
|
|
|
return &state->frontend;
|
|
|
|
error:
|
|
kfree(state);
|
|
return NULL;
|
|
}
|
|
EXPORT_SYMBOL(si2165_attach);
|
|
|
|
module_param(debug, int, 0644);
|
|
MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
|
|
|
|
MODULE_DESCRIPTION("Silicon Labs Si2165 DVB-C/-T Demodulator driver");
|
|
MODULE_AUTHOR("Matthias Schwarzott <zzam@gentoo.org>");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_FIRMWARE(SI2165_FIRMWARE_REV_D);
|