linux-sg2042/drivers/hwmon/g760a.c

273 lines
6.8 KiB
C

/*
g760a - Driver for the Global Mixed-mode Technology Inc. G760A
fan speed PWM controller chip
Copyright (C) 2007 Herbert Valerio Riedel <hvr@gnu.org>
Complete datasheet is available at GMT's website:
http://www.gmt.com.tw/datasheet/g760a.pdf
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/jiffies.h>
#include <linux/i2c.h>
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
#include <linux/err.h>
#include <linux/mutex.h>
#include <linux/sysfs.h>
static const struct i2c_device_id g760a_id[] = {
{ "g760a", 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, g760a_id);
enum g760a_regs {
G760A_REG_SET_CNT = 0x00,
G760A_REG_ACT_CNT = 0x01,
G760A_REG_FAN_STA = 0x02
};
#define G760A_REG_FAN_STA_RPM_OFF 0x1 /* +/-20% off */
#define G760A_REG_FAN_STA_RPM_LOW 0x2 /* below 1920rpm */
/* register data is read (and cached) at most once per second */
#define G760A_UPDATE_INTERVAL (HZ)
struct g760a_data {
struct i2c_client *client;
struct device *hwmon_dev;
struct mutex update_lock;
/* board specific parameters */
u32 clk; /* default 32kHz */
u16 fan_div; /* default P=2 */
/* g760a register cache */
unsigned int valid:1;
unsigned long last_updated; /* In jiffies */
u8 set_cnt; /* PWM (period) count number; 0xff stops fan */
u8 act_cnt; /* formula: cnt = (CLK * 30)/(rpm * P) */
u8 fan_sta; /* bit 0: set when actual fan speed more than 20%
* outside requested fan speed
* bit 1: set when fan speed below 1920 rpm */
};
#define G760A_DEFAULT_CLK 32768
#define G760A_DEFAULT_FAN_DIV 2
#define PWM_FROM_CNT(cnt) (0xff-(cnt))
#define PWM_TO_CNT(pwm) (0xff-(pwm))
unsigned int rpm_from_cnt(u8 val, u32 clk, u16 div)
{
return ((val == 0x00) ? 0 : ((clk*30)/(val*div)));
}
/* new-style driver model */
static int g760a_probe(struct i2c_client *client,
const struct i2c_device_id *id);
static int g760a_remove(struct i2c_client *client);
static struct i2c_driver g760a_driver = {
.driver = {
.name = "g760a",
},
.probe = g760a_probe,
.remove = g760a_remove,
.id_table = g760a_id,
};
/* read/write wrappers */
static int g760a_read_value(struct i2c_client *client, enum g760a_regs reg)
{
return i2c_smbus_read_byte_data(client, reg);
}
static int g760a_write_value(struct i2c_client *client, enum g760a_regs reg,
u16 value)
{
return i2c_smbus_write_byte_data(client, reg, value);
}
/****************************************************************************
* sysfs attributes
*/
static struct g760a_data *g760a_update_client(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
struct g760a_data *data = i2c_get_clientdata(client);
mutex_lock(&data->update_lock);
if (time_after(jiffies, data->last_updated + G760A_UPDATE_INTERVAL)
|| !data->valid) {
dev_dbg(&client->dev, "Starting g760a update\n");
data->set_cnt = g760a_read_value(client, G760A_REG_SET_CNT);
data->act_cnt = g760a_read_value(client, G760A_REG_ACT_CNT);
data->fan_sta = g760a_read_value(client, G760A_REG_FAN_STA);
data->last_updated = jiffies;
data->valid = 1;
}
mutex_unlock(&data->update_lock);
return data;
}
static ssize_t show_fan(struct device *dev, struct device_attribute *da,
char *buf)
{
struct g760a_data *data = g760a_update_client(dev);
unsigned int rpm = 0;
mutex_lock(&data->update_lock);
if (!(data->fan_sta & G760A_REG_FAN_STA_RPM_LOW))
rpm = rpm_from_cnt(data->act_cnt, data->clk, data->fan_div);
mutex_unlock(&data->update_lock);
return sprintf(buf, "%d\n", rpm);
}
static ssize_t show_fan_alarm(struct device *dev, struct device_attribute *da,
char *buf)
{
struct g760a_data *data = g760a_update_client(dev);
int fan_alarm = (data->fan_sta & G760A_REG_FAN_STA_RPM_OFF) ? 1 : 0;
return sprintf(buf, "%d\n", fan_alarm);
}
static ssize_t get_pwm(struct device *dev, struct device_attribute *da,
char *buf)
{
struct g760a_data *data = g760a_update_client(dev);
return sprintf(buf, "%d\n", PWM_FROM_CNT(data->set_cnt));
}
static ssize_t set_pwm(struct device *dev, struct device_attribute *da,
const char *buf, size_t count)
{
struct i2c_client *client = to_i2c_client(dev);
struct g760a_data *data = g760a_update_client(dev);
unsigned long val;
if (strict_strtoul(buf, 10, &val))
return -EINVAL;
mutex_lock(&data->update_lock);
data->set_cnt = PWM_TO_CNT(SENSORS_LIMIT(val, 0, 255));
g760a_write_value(client, G760A_REG_SET_CNT, data->set_cnt);
mutex_unlock(&data->update_lock);
return count;
}
static DEVICE_ATTR(pwm1, S_IWUSR | S_IRUGO, get_pwm, set_pwm);
static DEVICE_ATTR(fan1_input, S_IRUGO, show_fan, NULL);
static DEVICE_ATTR(fan1_alarm, S_IRUGO, show_fan_alarm, NULL);
static struct attribute *g760a_attributes[] = {
&dev_attr_pwm1.attr,
&dev_attr_fan1_input.attr,
&dev_attr_fan1_alarm.attr,
NULL
};
static const struct attribute_group g760a_group = {
.attrs = g760a_attributes,
};
/****************************************************************************
* new-style driver model code
*/
static int g760a_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct g760a_data *data;
int err;
if (!i2c_check_functionality(client->adapter,
I2C_FUNC_SMBUS_BYTE_DATA))
return -EIO;
data = kzalloc(sizeof(struct g760a_data), GFP_KERNEL);
if (!data)
return -ENOMEM;
i2c_set_clientdata(client, data);
data->client = client;
mutex_init(&data->update_lock);
/* setup default configuration for now */
data->fan_div = G760A_DEFAULT_FAN_DIV;
data->clk = G760A_DEFAULT_CLK;
/* Register sysfs hooks */
err = sysfs_create_group(&client->dev.kobj, &g760a_group);
if (err)
goto error_sysfs_create_group;
data->hwmon_dev = hwmon_device_register(&client->dev);
if (IS_ERR(data->hwmon_dev)) {
err = PTR_ERR(data->hwmon_dev);
goto error_hwmon_device_register;
}
return 0;
error_hwmon_device_register:
sysfs_remove_group(&client->dev.kobj, &g760a_group);
error_sysfs_create_group:
kfree(data);
i2c_set_clientdata(client, NULL);
return err;
}
static int g760a_remove(struct i2c_client *client)
{
struct g760a_data *data = i2c_get_clientdata(client);
hwmon_device_unregister(data->hwmon_dev);
sysfs_remove_group(&client->dev.kobj, &g760a_group);
kfree(data);
i2c_set_clientdata(client, NULL);
return 0;
}
/* module management */
static int __init g760a_init(void)
{
return i2c_add_driver(&g760a_driver);
}
static void __exit g760a_exit(void)
{
i2c_del_driver(&g760a_driver);
}
MODULE_AUTHOR("Herbert Valerio Riedel <hvr@gnu.org>");
MODULE_DESCRIPTION("GMT G760A driver");
MODULE_LICENSE("GPL");
module_init(g760a_init);
module_exit(g760a_exit);