512 lines
13 KiB
C
512 lines
13 KiB
C
/*
|
|
* Thunderbolt Cactus Ridge driver - switch/port utility functions
|
|
*
|
|
* Copyright (c) 2014 Andreas Noever <andreas.noever@gmail.com>
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/slab.h>
|
|
|
|
#include "tb.h"
|
|
|
|
/* port utility functions */
|
|
|
|
static const char *tb_port_type(struct tb_regs_port_header *port)
|
|
{
|
|
switch (port->type >> 16) {
|
|
case 0:
|
|
switch ((u8) port->type) {
|
|
case 0:
|
|
return "Inactive";
|
|
case 1:
|
|
return "Port";
|
|
case 2:
|
|
return "NHI";
|
|
default:
|
|
return "unknown";
|
|
}
|
|
case 0x2:
|
|
return "Ethernet";
|
|
case 0x8:
|
|
return "SATA";
|
|
case 0xe:
|
|
return "DP/HDMI";
|
|
case 0x10:
|
|
return "PCIe";
|
|
case 0x20:
|
|
return "USB";
|
|
default:
|
|
return "unknown";
|
|
}
|
|
}
|
|
|
|
static void tb_dump_port(struct tb *tb, struct tb_regs_port_header *port)
|
|
{
|
|
tb_info(tb,
|
|
" Port %d: %x:%x (Revision: %d, TB Version: %d, Type: %s (%#x))\n",
|
|
port->port_number, port->vendor_id, port->device_id,
|
|
port->revision, port->thunderbolt_version, tb_port_type(port),
|
|
port->type);
|
|
tb_info(tb, " Max hop id (in/out): %d/%d\n",
|
|
port->max_in_hop_id, port->max_out_hop_id);
|
|
tb_info(tb, " Max counters: %d\n", port->max_counters);
|
|
tb_info(tb, " NFC Credits: %#x\n", port->nfc_credits);
|
|
}
|
|
|
|
/**
|
|
* tb_port_state() - get connectedness state of a port
|
|
*
|
|
* The port must have a TB_CAP_PHY (i.e. it should be a real port).
|
|
*
|
|
* Return: Returns an enum tb_port_state on success or an error code on failure.
|
|
*/
|
|
static int tb_port_state(struct tb_port *port)
|
|
{
|
|
struct tb_cap_phy phy;
|
|
int res;
|
|
if (port->cap_phy == 0) {
|
|
tb_port_WARN(port, "does not have a PHY\n");
|
|
return -EINVAL;
|
|
}
|
|
res = tb_port_read(port, &phy, TB_CFG_PORT, port->cap_phy, 2);
|
|
if (res)
|
|
return res;
|
|
return phy.state;
|
|
}
|
|
|
|
/**
|
|
* tb_wait_for_port() - wait for a port to become ready
|
|
*
|
|
* Wait up to 1 second for a port to reach state TB_PORT_UP. If
|
|
* wait_if_unplugged is set then we also wait if the port is in state
|
|
* TB_PORT_UNPLUGGED (it takes a while for the device to be registered after
|
|
* switch resume). Otherwise we only wait if a device is registered but the link
|
|
* has not yet been established.
|
|
*
|
|
* Return: Returns an error code on failure. Returns 0 if the port is not
|
|
* connected or failed to reach state TB_PORT_UP within one second. Returns 1
|
|
* if the port is connected and in state TB_PORT_UP.
|
|
*/
|
|
int tb_wait_for_port(struct tb_port *port, bool wait_if_unplugged)
|
|
{
|
|
int retries = 10;
|
|
int state;
|
|
if (!port->cap_phy) {
|
|
tb_port_WARN(port, "does not have PHY\n");
|
|
return -EINVAL;
|
|
}
|
|
if (tb_is_upstream_port(port)) {
|
|
tb_port_WARN(port, "is the upstream port\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
while (retries--) {
|
|
state = tb_port_state(port);
|
|
if (state < 0)
|
|
return state;
|
|
if (state == TB_PORT_DISABLED) {
|
|
tb_port_info(port, "is disabled (state: 0)\n");
|
|
return 0;
|
|
}
|
|
if (state == TB_PORT_UNPLUGGED) {
|
|
if (wait_if_unplugged) {
|
|
/* used during resume */
|
|
tb_port_info(port,
|
|
"is unplugged (state: 7), retrying...\n");
|
|
msleep(100);
|
|
continue;
|
|
}
|
|
tb_port_info(port, "is unplugged (state: 7)\n");
|
|
return 0;
|
|
}
|
|
if (state == TB_PORT_UP) {
|
|
tb_port_info(port,
|
|
"is connected, link is up (state: 2)\n");
|
|
return 1;
|
|
}
|
|
|
|
/*
|
|
* After plug-in the state is TB_PORT_CONNECTING. Give it some
|
|
* time.
|
|
*/
|
|
tb_port_info(port,
|
|
"is connected, link is not up (state: %d), retrying...\n",
|
|
state);
|
|
msleep(100);
|
|
}
|
|
tb_port_warn(port,
|
|
"failed to reach state TB_PORT_UP. Ignoring port...\n");
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* tb_port_add_nfc_credits() - add/remove non flow controlled credits to port
|
|
*
|
|
* Change the number of NFC credits allocated to @port by @credits. To remove
|
|
* NFC credits pass a negative amount of credits.
|
|
*
|
|
* Return: Returns 0 on success or an error code on failure.
|
|
*/
|
|
int tb_port_add_nfc_credits(struct tb_port *port, int credits)
|
|
{
|
|
if (credits == 0)
|
|
return 0;
|
|
tb_port_info(port,
|
|
"adding %#x NFC credits (%#x -> %#x)",
|
|
credits,
|
|
port->config.nfc_credits,
|
|
port->config.nfc_credits + credits);
|
|
port->config.nfc_credits += credits;
|
|
return tb_port_write(port, &port->config.nfc_credits,
|
|
TB_CFG_PORT, 4, 1);
|
|
}
|
|
|
|
/**
|
|
* tb_port_clear_counter() - clear a counter in TB_CFG_COUNTER
|
|
*
|
|
* Return: Returns 0 on success or an error code on failure.
|
|
*/
|
|
int tb_port_clear_counter(struct tb_port *port, int counter)
|
|
{
|
|
u32 zero[3] = { 0, 0, 0 };
|
|
tb_port_info(port, "clearing counter %d\n", counter);
|
|
return tb_port_write(port, zero, TB_CFG_COUNTERS, 3 * counter, 3);
|
|
}
|
|
|
|
/**
|
|
* tb_init_port() - initialize a port
|
|
*
|
|
* This is a helper method for tb_switch_alloc. Does not check or initialize
|
|
* any downstream switches.
|
|
*
|
|
* Return: Returns 0 on success or an error code on failure.
|
|
*/
|
|
static int tb_init_port(struct tb_port *port)
|
|
{
|
|
int res;
|
|
int cap;
|
|
|
|
res = tb_port_read(port, &port->config, TB_CFG_PORT, 0, 8);
|
|
if (res)
|
|
return res;
|
|
|
|
/* Port 0 is the switch itself and has no PHY. */
|
|
if (port->config.type == TB_TYPE_PORT && port->port != 0) {
|
|
cap = tb_find_cap(port, TB_CFG_PORT, TB_CAP_PHY);
|
|
|
|
if (cap > 0)
|
|
port->cap_phy = cap;
|
|
else
|
|
tb_port_WARN(port, "non switch port without a PHY\n");
|
|
}
|
|
|
|
tb_dump_port(port->sw->tb, &port->config);
|
|
|
|
/* TODO: Read dual link port, DP port and more from EEPROM. */
|
|
return 0;
|
|
|
|
}
|
|
|
|
/* switch utility functions */
|
|
|
|
static void tb_dump_switch(struct tb *tb, struct tb_regs_switch_header *sw)
|
|
{
|
|
tb_info(tb,
|
|
" Switch: %x:%x (Revision: %d, TB Version: %d)\n",
|
|
sw->vendor_id, sw->device_id, sw->revision,
|
|
sw->thunderbolt_version);
|
|
tb_info(tb, " Max Port Number: %d\n", sw->max_port_number);
|
|
tb_info(tb, " Config:\n");
|
|
tb_info(tb,
|
|
" Upstream Port Number: %d Depth: %d Route String: %#llx Enabled: %d, PlugEventsDelay: %dms\n",
|
|
sw->upstream_port_number, sw->depth,
|
|
(((u64) sw->route_hi) << 32) | sw->route_lo,
|
|
sw->enabled, sw->plug_events_delay);
|
|
tb_info(tb,
|
|
" unknown1: %#x unknown4: %#x\n",
|
|
sw->__unknown1, sw->__unknown4);
|
|
}
|
|
|
|
/**
|
|
* reset_switch() - reconfigure route, enable and send TB_CFG_PKG_RESET
|
|
*
|
|
* Return: Returns 0 on success or an error code on failure.
|
|
*/
|
|
int tb_switch_reset(struct tb *tb, u64 route)
|
|
{
|
|
struct tb_cfg_result res;
|
|
struct tb_regs_switch_header header = {
|
|
header.route_hi = route >> 32,
|
|
header.route_lo = route,
|
|
header.enabled = true,
|
|
};
|
|
tb_info(tb, "resetting switch at %llx\n", route);
|
|
res.err = tb_cfg_write(tb->ctl, ((u32 *) &header) + 2, route,
|
|
0, 2, 2, 2);
|
|
if (res.err)
|
|
return res.err;
|
|
res = tb_cfg_reset(tb->ctl, route, TB_CFG_DEFAULT_TIMEOUT);
|
|
if (res.err > 0)
|
|
return -EIO;
|
|
return res.err;
|
|
}
|
|
|
|
struct tb_switch *get_switch_at_route(struct tb_switch *sw, u64 route)
|
|
{
|
|
u8 next_port = route; /*
|
|
* Routes use a stride of 8 bits,
|
|
* eventhough a port index has 6 bits at most.
|
|
* */
|
|
if (route == 0)
|
|
return sw;
|
|
if (next_port > sw->config.max_port_number)
|
|
return NULL;
|
|
if (tb_is_upstream_port(&sw->ports[next_port]))
|
|
return NULL;
|
|
if (!sw->ports[next_port].remote)
|
|
return NULL;
|
|
return get_switch_at_route(sw->ports[next_port].remote->sw,
|
|
route >> TB_ROUTE_SHIFT);
|
|
}
|
|
|
|
/**
|
|
* tb_plug_events_active() - enable/disable plug events on a switch
|
|
*
|
|
* Also configures a sane plug_events_delay of 255ms.
|
|
*
|
|
* Return: Returns 0 on success or an error code on failure.
|
|
*/
|
|
static int tb_plug_events_active(struct tb_switch *sw, bool active)
|
|
{
|
|
u32 data;
|
|
int res;
|
|
|
|
sw->config.plug_events_delay = 0xff;
|
|
res = tb_sw_write(sw, ((u32 *) &sw->config) + 4, TB_CFG_SWITCH, 4, 1);
|
|
if (res)
|
|
return res;
|
|
|
|
res = tb_sw_read(sw, &data, TB_CFG_SWITCH, sw->cap_plug_events + 1, 1);
|
|
if (res)
|
|
return res;
|
|
|
|
if (active) {
|
|
data = data & 0xFFFFFF83;
|
|
switch (sw->config.device_id) {
|
|
case PCI_DEVICE_ID_INTEL_LIGHT_RIDGE:
|
|
case PCI_DEVICE_ID_INTEL_EAGLE_RIDGE:
|
|
case PCI_DEVICE_ID_INTEL_PORT_RIDGE:
|
|
break;
|
|
default:
|
|
data |= 4;
|
|
}
|
|
} else {
|
|
data = data | 0x7c;
|
|
}
|
|
return tb_sw_write(sw, &data, TB_CFG_SWITCH,
|
|
sw->cap_plug_events + 1, 1);
|
|
}
|
|
|
|
|
|
/**
|
|
* tb_switch_free() - free a tb_switch and all downstream switches
|
|
*/
|
|
void tb_switch_free(struct tb_switch *sw)
|
|
{
|
|
int i;
|
|
/* port 0 is the switch itself and never has a remote */
|
|
for (i = 1; i <= sw->config.max_port_number; i++) {
|
|
if (tb_is_upstream_port(&sw->ports[i]))
|
|
continue;
|
|
if (sw->ports[i].remote)
|
|
tb_switch_free(sw->ports[i].remote->sw);
|
|
sw->ports[i].remote = NULL;
|
|
}
|
|
|
|
if (!sw->is_unplugged)
|
|
tb_plug_events_active(sw, false);
|
|
|
|
kfree(sw->ports);
|
|
kfree(sw->drom);
|
|
kfree(sw);
|
|
}
|
|
|
|
/**
|
|
* tb_switch_alloc() - allocate and initialize a switch
|
|
*
|
|
* Return: Returns a NULL on failure.
|
|
*/
|
|
struct tb_switch *tb_switch_alloc(struct tb *tb, u64 route)
|
|
{
|
|
int i;
|
|
int cap;
|
|
struct tb_switch *sw;
|
|
int upstream_port = tb_cfg_get_upstream_port(tb->ctl, route);
|
|
if (upstream_port < 0)
|
|
return NULL;
|
|
|
|
sw = kzalloc(sizeof(*sw), GFP_KERNEL);
|
|
if (!sw)
|
|
return NULL;
|
|
|
|
sw->tb = tb;
|
|
if (tb_cfg_read(tb->ctl, &sw->config, route, 0, TB_CFG_SWITCH, 0, 5))
|
|
goto err;
|
|
tb_info(tb,
|
|
"initializing Switch at %#llx (depth: %d, up port: %d)\n",
|
|
route, tb_route_length(route), upstream_port);
|
|
tb_info(tb, "old switch config:\n");
|
|
tb_dump_switch(tb, &sw->config);
|
|
|
|
/* configure switch */
|
|
sw->config.upstream_port_number = upstream_port;
|
|
sw->config.depth = tb_route_length(route);
|
|
sw->config.route_lo = route;
|
|
sw->config.route_hi = route >> 32;
|
|
sw->config.enabled = 1;
|
|
/* from here on we may use the tb_sw_* functions & macros */
|
|
|
|
if (sw->config.vendor_id != 0x8086)
|
|
tb_sw_warn(sw, "unknown switch vendor id %#x\n",
|
|
sw->config.vendor_id);
|
|
|
|
if (sw->config.device_id != PCI_DEVICE_ID_INTEL_LIGHT_RIDGE &&
|
|
sw->config.device_id != PCI_DEVICE_ID_INTEL_CACTUS_RIDGE_4C &&
|
|
sw->config.device_id != PCI_DEVICE_ID_INTEL_PORT_RIDGE &&
|
|
sw->config.device_id != PCI_DEVICE_ID_INTEL_FALCON_RIDGE_2C_BRIDGE &&
|
|
sw->config.device_id != PCI_DEVICE_ID_INTEL_FALCON_RIDGE_4C_BRIDGE)
|
|
tb_sw_warn(sw, "unsupported switch device id %#x\n",
|
|
sw->config.device_id);
|
|
|
|
/* upload configuration */
|
|
if (tb_sw_write(sw, 1 + (u32 *) &sw->config, TB_CFG_SWITCH, 1, 3))
|
|
goto err;
|
|
|
|
/* initialize ports */
|
|
sw->ports = kcalloc(sw->config.max_port_number + 1, sizeof(*sw->ports),
|
|
GFP_KERNEL);
|
|
if (!sw->ports)
|
|
goto err;
|
|
|
|
for (i = 0; i <= sw->config.max_port_number; i++) {
|
|
/* minimum setup for tb_find_cap and tb_drom_read to work */
|
|
sw->ports[i].sw = sw;
|
|
sw->ports[i].port = i;
|
|
}
|
|
|
|
cap = tb_find_cap(&sw->ports[0], TB_CFG_SWITCH, TB_CAP_PLUG_EVENTS);
|
|
if (cap < 0) {
|
|
tb_sw_warn(sw, "cannot find TB_CAP_PLUG_EVENTS aborting\n");
|
|
goto err;
|
|
}
|
|
sw->cap_plug_events = cap;
|
|
|
|
/* read drom */
|
|
if (tb_drom_read(sw))
|
|
tb_sw_warn(sw, "tb_eeprom_read_rom failed, continuing\n");
|
|
tb_sw_info(sw, "uid: %#llx\n", sw->uid);
|
|
|
|
for (i = 0; i <= sw->config.max_port_number; i++) {
|
|
if (sw->ports[i].disabled) {
|
|
tb_port_info(&sw->ports[i], "disabled by eeprom\n");
|
|
continue;
|
|
}
|
|
if (tb_init_port(&sw->ports[i]))
|
|
goto err;
|
|
}
|
|
|
|
/* TODO: I2C, IECS, link controller */
|
|
|
|
if (tb_plug_events_active(sw, true))
|
|
goto err;
|
|
|
|
return sw;
|
|
err:
|
|
kfree(sw->ports);
|
|
kfree(sw->drom);
|
|
kfree(sw);
|
|
return NULL;
|
|
}
|
|
|
|
/**
|
|
* tb_sw_set_unplugged() - set is_unplugged on switch and downstream switches
|
|
*/
|
|
void tb_sw_set_unplugged(struct tb_switch *sw)
|
|
{
|
|
int i;
|
|
if (sw == sw->tb->root_switch) {
|
|
tb_sw_WARN(sw, "cannot unplug root switch\n");
|
|
return;
|
|
}
|
|
if (sw->is_unplugged) {
|
|
tb_sw_WARN(sw, "is_unplugged already set\n");
|
|
return;
|
|
}
|
|
sw->is_unplugged = true;
|
|
for (i = 0; i <= sw->config.max_port_number; i++) {
|
|
if (!tb_is_upstream_port(&sw->ports[i]) && sw->ports[i].remote)
|
|
tb_sw_set_unplugged(sw->ports[i].remote->sw);
|
|
}
|
|
}
|
|
|
|
int tb_switch_resume(struct tb_switch *sw)
|
|
{
|
|
int i, err;
|
|
u64 uid;
|
|
tb_sw_info(sw, "resuming switch\n");
|
|
|
|
err = tb_drom_read_uid_only(sw, &uid);
|
|
if (err) {
|
|
tb_sw_warn(sw, "uid read failed\n");
|
|
return err;
|
|
}
|
|
if (sw != sw->tb->root_switch && sw->uid != uid) {
|
|
tb_sw_info(sw,
|
|
"changed while suspended (uid %#llx -> %#llx)\n",
|
|
sw->uid, uid);
|
|
return -ENODEV;
|
|
}
|
|
|
|
/* upload configuration */
|
|
err = tb_sw_write(sw, 1 + (u32 *) &sw->config, TB_CFG_SWITCH, 1, 3);
|
|
if (err)
|
|
return err;
|
|
|
|
err = tb_plug_events_active(sw, true);
|
|
if (err)
|
|
return err;
|
|
|
|
/* check for surviving downstream switches */
|
|
for (i = 1; i <= sw->config.max_port_number; i++) {
|
|
struct tb_port *port = &sw->ports[i];
|
|
if (tb_is_upstream_port(port))
|
|
continue;
|
|
if (!port->remote)
|
|
continue;
|
|
if (tb_wait_for_port(port, true) <= 0
|
|
|| tb_switch_resume(port->remote->sw)) {
|
|
tb_port_warn(port,
|
|
"lost during suspend, disconnecting\n");
|
|
tb_sw_set_unplugged(port->remote->sw);
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
void tb_switch_suspend(struct tb_switch *sw)
|
|
{
|
|
int i, err;
|
|
err = tb_plug_events_active(sw, false);
|
|
if (err)
|
|
return;
|
|
|
|
for (i = 1; i <= sw->config.max_port_number; i++) {
|
|
if (!tb_is_upstream_port(&sw->ports[i]) && sw->ports[i].remote)
|
|
tb_switch_suspend(sw->ports[i].remote->sw);
|
|
}
|
|
/*
|
|
* TODO: invoke tb_cfg_prepare_to_sleep here? does not seem to have any
|
|
* effect?
|
|
*/
|
|
}
|