linux-sg2042/drivers/i2c/busses/i2c-xgene-slimpro.c

471 lines
12 KiB
C

/*
* X-Gene SLIMpro I2C Driver
*
* Copyright (c) 2014, Applied Micro Circuits Corporation
* Author: Feng Kan <fkan@apm.com>
* Author: Hieu Le <hnle@apm.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, see <http://www.gnu.org/licenses/>.
*
* This driver provides support for X-Gene SLIMpro I2C device access
* using the APM X-Gene SLIMpro mailbox driver.
*
*/
#include <linux/acpi.h>
#include <linux/dma-mapping.h>
#include <linux/i2c.h>
#include <linux/interrupt.h>
#include <linux/mailbox_client.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/version.h>
#define MAILBOX_OP_TIMEOUT 1000 /* Operation time out in ms */
#define MAILBOX_I2C_INDEX 0
#define SLIMPRO_IIC_BUS 1 /* Use I2C bus 1 only */
#define SMBUS_CMD_LEN 1
#define BYTE_DATA 1
#define WORD_DATA 2
#define BLOCK_DATA 3
#define SLIMPRO_IIC_I2C_PROTOCOL 0
#define SLIMPRO_IIC_SMB_PROTOCOL 1
#define SLIMPRO_IIC_READ 0
#define SLIMPRO_IIC_WRITE 1
#define IIC_SMB_WITHOUT_DATA_LEN 0
#define IIC_SMB_WITH_DATA_LEN 1
#define SLIMPRO_DEBUG_MSG 0
#define SLIMPRO_MSG_TYPE_SHIFT 28
#define SLIMPRO_DBG_SUBTYPE_I2C1READ 4
#define SLIMPRO_DBGMSG_TYPE_SHIFT 24
#define SLIMPRO_DBGMSG_TYPE_MASK 0x0F000000U
#define SLIMPRO_IIC_DEV_SHIFT 23
#define SLIMPRO_IIC_DEV_MASK 0x00800000U
#define SLIMPRO_IIC_DEVID_SHIFT 13
#define SLIMPRO_IIC_DEVID_MASK 0x007FE000U
#define SLIMPRO_IIC_RW_SHIFT 12
#define SLIMPRO_IIC_RW_MASK 0x00001000U
#define SLIMPRO_IIC_PROTO_SHIFT 11
#define SLIMPRO_IIC_PROTO_MASK 0x00000800U
#define SLIMPRO_IIC_ADDRLEN_SHIFT 8
#define SLIMPRO_IIC_ADDRLEN_MASK 0x00000700U
#define SLIMPRO_IIC_DATALEN_SHIFT 0
#define SLIMPRO_IIC_DATALEN_MASK 0x000000FFU
/*
* SLIMpro I2C message encode
*
* dev - Controller number (0-based)
* chip - I2C chip address
* op - SLIMPRO_IIC_READ or SLIMPRO_IIC_WRITE
* proto - SLIMPRO_IIC_SMB_PROTOCOL or SLIMPRO_IIC_I2C_PROTOCOL
* addrlen - Length of the address field
* datalen - Length of the data field
*/
#define SLIMPRO_IIC_ENCODE_MSG(dev, chip, op, proto, addrlen, datalen) \
((SLIMPRO_DEBUG_MSG << SLIMPRO_MSG_TYPE_SHIFT) | \
((SLIMPRO_DBG_SUBTYPE_I2C1READ << SLIMPRO_DBGMSG_TYPE_SHIFT) & \
SLIMPRO_DBGMSG_TYPE_MASK) | \
((dev << SLIMPRO_IIC_DEV_SHIFT) & SLIMPRO_IIC_DEV_MASK) | \
((chip << SLIMPRO_IIC_DEVID_SHIFT) & SLIMPRO_IIC_DEVID_MASK) | \
((op << SLIMPRO_IIC_RW_SHIFT) & SLIMPRO_IIC_RW_MASK) | \
((proto << SLIMPRO_IIC_PROTO_SHIFT) & SLIMPRO_IIC_PROTO_MASK) | \
((addrlen << SLIMPRO_IIC_ADDRLEN_SHIFT) & SLIMPRO_IIC_ADDRLEN_MASK) | \
((datalen << SLIMPRO_IIC_DATALEN_SHIFT) & SLIMPRO_IIC_DATALEN_MASK))
/*
* Encode for upper address for block data
*/
#define SLIMPRO_IIC_ENCODE_FLAG_BUFADDR 0x80000000
#define SLIMPRO_IIC_ENCODE_FLAG_WITH_DATA_LEN(a) ((u32) (((a) << 30) \
& 0x40000000))
#define SLIMPRO_IIC_ENCODE_UPPER_BUFADDR(a) ((u32) (((a) >> 12) \
& 0x3FF00000))
#define SLIMPRO_IIC_ENCODE_ADDR(a) ((a) & 0x000FFFFF)
struct slimpro_i2c_dev {
struct i2c_adapter adapter;
struct device *dev;
struct mbox_chan *mbox_chan;
struct mbox_client mbox_client;
struct completion rd_complete;
u8 dma_buffer[I2C_SMBUS_BLOCK_MAX + 1]; /* dma_buffer[0] is used for length */
u32 *resp_msg;
};
#define to_slimpro_i2c_dev(cl) \
container_of(cl, struct slimpro_i2c_dev, mbox_client)
static void slimpro_i2c_rx_cb(struct mbox_client *cl, void *mssg)
{
struct slimpro_i2c_dev *ctx = to_slimpro_i2c_dev(cl);
/*
* Response message format:
* mssg[0] is the return code of the operation
* mssg[1] is the first data word
* mssg[2] is NOT used
*/
if (ctx->resp_msg)
*ctx->resp_msg = ((u32 *)mssg)[1];
if (ctx->mbox_client.tx_block)
complete(&ctx->rd_complete);
}
static int start_i2c_msg_xfer(struct slimpro_i2c_dev *ctx)
{
if (ctx->mbox_client.tx_block) {
if (!wait_for_completion_timeout(&ctx->rd_complete,
msecs_to_jiffies(MAILBOX_OP_TIMEOUT)))
return -ETIMEDOUT;
}
/* Check of invalid data or no device */
if (*ctx->resp_msg == 0xffffffff)
return -ENODEV;
return 0;
}
static int slimpro_i2c_rd(struct slimpro_i2c_dev *ctx, u32 chip,
u32 addr, u32 addrlen, u32 protocol,
u32 readlen, u32 *data)
{
u32 msg[3];
int rc;
msg[0] = SLIMPRO_IIC_ENCODE_MSG(SLIMPRO_IIC_BUS, chip,
SLIMPRO_IIC_READ, protocol, addrlen, readlen);
msg[1] = SLIMPRO_IIC_ENCODE_ADDR(addr);
msg[2] = 0;
ctx->resp_msg = data;
rc = mbox_send_message(ctx->mbox_chan, &msg);
if (rc < 0)
goto err;
rc = start_i2c_msg_xfer(ctx);
err:
ctx->resp_msg = NULL;
return rc;
}
static int slimpro_i2c_wr(struct slimpro_i2c_dev *ctx, u32 chip,
u32 addr, u32 addrlen, u32 protocol, u32 writelen,
u32 data)
{
u32 msg[3];
int rc;
msg[0] = SLIMPRO_IIC_ENCODE_MSG(SLIMPRO_IIC_BUS, chip,
SLIMPRO_IIC_WRITE, protocol, addrlen, writelen);
msg[1] = SLIMPRO_IIC_ENCODE_ADDR(addr);
msg[2] = data;
ctx->resp_msg = msg;
rc = mbox_send_message(ctx->mbox_chan, &msg);
if (rc < 0)
goto err;
rc = start_i2c_msg_xfer(ctx);
err:
ctx->resp_msg = NULL;
return rc;
}
static int slimpro_i2c_blkrd(struct slimpro_i2c_dev *ctx, u32 chip, u32 addr,
u32 addrlen, u32 protocol, u32 readlen,
u32 with_data_len, void *data)
{
dma_addr_t paddr;
u32 msg[3];
int rc;
paddr = dma_map_single(ctx->dev, ctx->dma_buffer, readlen, DMA_FROM_DEVICE);
if (dma_mapping_error(ctx->dev, paddr)) {
dev_err(&ctx->adapter.dev, "Error in mapping dma buffer %p\n",
ctx->dma_buffer);
rc = -ENOMEM;
goto err;
}
msg[0] = SLIMPRO_IIC_ENCODE_MSG(SLIMPRO_IIC_BUS, chip, SLIMPRO_IIC_READ,
protocol, addrlen, readlen);
msg[1] = SLIMPRO_IIC_ENCODE_FLAG_BUFADDR |
SLIMPRO_IIC_ENCODE_FLAG_WITH_DATA_LEN(with_data_len) |
SLIMPRO_IIC_ENCODE_UPPER_BUFADDR(paddr) |
SLIMPRO_IIC_ENCODE_ADDR(addr);
msg[2] = (u32)paddr;
ctx->resp_msg = msg;
rc = mbox_send_message(ctx->mbox_chan, &msg);
if (rc < 0)
goto err_unmap;
rc = start_i2c_msg_xfer(ctx);
/* Copy to destination */
memcpy(data, ctx->dma_buffer, readlen);
err_unmap:
dma_unmap_single(ctx->dev, paddr, readlen, DMA_FROM_DEVICE);
err:
ctx->resp_msg = NULL;
return rc;
}
static int slimpro_i2c_blkwr(struct slimpro_i2c_dev *ctx, u32 chip,
u32 addr, u32 addrlen, u32 protocol, u32 writelen,
void *data)
{
dma_addr_t paddr;
u32 msg[3];
int rc;
memcpy(ctx->dma_buffer, data, writelen);
paddr = dma_map_single(ctx->dev, ctx->dma_buffer, writelen,
DMA_TO_DEVICE);
if (dma_mapping_error(ctx->dev, paddr)) {
dev_err(&ctx->adapter.dev, "Error in mapping dma buffer %p\n",
ctx->dma_buffer);
rc = -ENOMEM;
goto err;
}
msg[0] = SLIMPRO_IIC_ENCODE_MSG(SLIMPRO_IIC_BUS, chip, SLIMPRO_IIC_WRITE,
protocol, addrlen, writelen);
msg[1] = SLIMPRO_IIC_ENCODE_FLAG_BUFADDR |
SLIMPRO_IIC_ENCODE_UPPER_BUFADDR(paddr) |
SLIMPRO_IIC_ENCODE_ADDR(addr);
msg[2] = (u32)paddr;
ctx->resp_msg = msg;
if (ctx->mbox_client.tx_block)
reinit_completion(&ctx->rd_complete);
rc = mbox_send_message(ctx->mbox_chan, &msg);
if (rc < 0)
goto err_unmap;
rc = start_i2c_msg_xfer(ctx);
err_unmap:
dma_unmap_single(ctx->dev, paddr, writelen, DMA_TO_DEVICE);
err:
ctx->resp_msg = NULL;
return rc;
}
static int xgene_slimpro_i2c_xfer(struct i2c_adapter *adap, u16 addr,
unsigned short flags, char read_write,
u8 command, int size,
union i2c_smbus_data *data)
{
struct slimpro_i2c_dev *ctx = i2c_get_adapdata(adap);
int ret = -EOPNOTSUPP;
u32 val;
switch (size) {
case I2C_SMBUS_BYTE:
if (read_write == I2C_SMBUS_READ) {
ret = slimpro_i2c_rd(ctx, addr, 0, 0,
SLIMPRO_IIC_SMB_PROTOCOL,
BYTE_DATA, &val);
data->byte = val;
} else {
ret = slimpro_i2c_wr(ctx, addr, command, SMBUS_CMD_LEN,
SLIMPRO_IIC_SMB_PROTOCOL,
0, 0);
}
break;
case I2C_SMBUS_BYTE_DATA:
if (read_write == I2C_SMBUS_READ) {
ret = slimpro_i2c_rd(ctx, addr, command, SMBUS_CMD_LEN,
SLIMPRO_IIC_SMB_PROTOCOL,
BYTE_DATA, &val);
data->byte = val;
} else {
val = data->byte;
ret = slimpro_i2c_wr(ctx, addr, command, SMBUS_CMD_LEN,
SLIMPRO_IIC_SMB_PROTOCOL,
BYTE_DATA, val);
}
break;
case I2C_SMBUS_WORD_DATA:
if (read_write == I2C_SMBUS_READ) {
ret = slimpro_i2c_rd(ctx, addr, command, SMBUS_CMD_LEN,
SLIMPRO_IIC_SMB_PROTOCOL,
WORD_DATA, &val);
data->word = val;
} else {
val = data->word;
ret = slimpro_i2c_wr(ctx, addr, command, SMBUS_CMD_LEN,
SLIMPRO_IIC_SMB_PROTOCOL,
WORD_DATA, val);
}
break;
case I2C_SMBUS_BLOCK_DATA:
if (read_write == I2C_SMBUS_READ) {
ret = slimpro_i2c_blkrd(ctx, addr, command,
SMBUS_CMD_LEN,
SLIMPRO_IIC_SMB_PROTOCOL,
I2C_SMBUS_BLOCK_MAX + 1,
IIC_SMB_WITH_DATA_LEN,
&data->block[0]);
} else {
ret = slimpro_i2c_blkwr(ctx, addr, command,
SMBUS_CMD_LEN,
SLIMPRO_IIC_SMB_PROTOCOL,
data->block[0] + 1,
&data->block[0]);
}
break;
case I2C_SMBUS_I2C_BLOCK_DATA:
if (read_write == I2C_SMBUS_READ) {
ret = slimpro_i2c_blkrd(ctx, addr,
command,
SMBUS_CMD_LEN,
SLIMPRO_IIC_I2C_PROTOCOL,
I2C_SMBUS_BLOCK_MAX,
IIC_SMB_WITHOUT_DATA_LEN,
&data->block[1]);
} else {
ret = slimpro_i2c_blkwr(ctx, addr, command,
SMBUS_CMD_LEN,
SLIMPRO_IIC_I2C_PROTOCOL,
data->block[0],
&data->block[1]);
}
break;
default:
break;
}
return ret;
}
/*
* Return list of supported functionality.
*/
static u32 xgene_slimpro_i2c_func(struct i2c_adapter *adapter)
{
return I2C_FUNC_SMBUS_BYTE |
I2C_FUNC_SMBUS_BYTE_DATA |
I2C_FUNC_SMBUS_WORD_DATA |
I2C_FUNC_SMBUS_BLOCK_DATA |
I2C_FUNC_SMBUS_I2C_BLOCK;
}
static const struct i2c_algorithm xgene_slimpro_i2c_algorithm = {
.smbus_xfer = xgene_slimpro_i2c_xfer,
.functionality = xgene_slimpro_i2c_func,
};
static int xgene_slimpro_i2c_probe(struct platform_device *pdev)
{
struct slimpro_i2c_dev *ctx;
struct i2c_adapter *adapter;
struct mbox_client *cl;
int rc;
ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx), GFP_KERNEL);
if (!ctx)
return -ENOMEM;
ctx->dev = &pdev->dev;
platform_set_drvdata(pdev, ctx);
cl = &ctx->mbox_client;
/* Request mailbox channel */
cl->dev = &pdev->dev;
cl->rx_callback = slimpro_i2c_rx_cb;
cl->tx_block = true;
init_completion(&ctx->rd_complete);
cl->tx_tout = MAILBOX_OP_TIMEOUT;
cl->knows_txdone = false;
ctx->mbox_chan = mbox_request_channel(cl, MAILBOX_I2C_INDEX);
if (IS_ERR(ctx->mbox_chan)) {
dev_err(&pdev->dev, "i2c mailbox channel request failed\n");
return PTR_ERR(ctx->mbox_chan);
}
rc = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
if (rc)
dev_warn(&pdev->dev, "Unable to set dma mask\n");
/* Setup I2C adapter */
adapter = &ctx->adapter;
snprintf(adapter->name, sizeof(adapter->name), "MAILBOX I2C");
adapter->algo = &xgene_slimpro_i2c_algorithm;
adapter->class = I2C_CLASS_HWMON;
adapter->dev.parent = &pdev->dev;
adapter->dev.of_node = pdev->dev.of_node;
i2c_set_adapdata(adapter, ctx);
rc = i2c_add_adapter(adapter);
if (rc) {
mbox_free_channel(ctx->mbox_chan);
return rc;
}
dev_info(&pdev->dev, "Mailbox I2C Adapter registered\n");
return 0;
}
static int xgene_slimpro_i2c_remove(struct platform_device *pdev)
{
struct slimpro_i2c_dev *ctx = platform_get_drvdata(pdev);
i2c_del_adapter(&ctx->adapter);
mbox_free_channel(ctx->mbox_chan);
return 0;
}
static const struct of_device_id xgene_slimpro_i2c_dt_ids[] = {
{.compatible = "apm,xgene-slimpro-i2c" },
{},
};
MODULE_DEVICE_TABLE(of, xgene_slimpro_i2c_dt_ids);
#ifdef CONFIG_ACPI
static const struct acpi_device_id xgene_slimpro_i2c_acpi_ids[] = {
{"APMC0D40", 0},
{}
};
MODULE_DEVICE_TABLE(acpi, xgene_slimpro_i2c_acpi_ids);
#endif
static struct platform_driver xgene_slimpro_i2c_driver = {
.probe = xgene_slimpro_i2c_probe,
.remove = xgene_slimpro_i2c_remove,
.driver = {
.name = "xgene-slimpro-i2c",
.of_match_table = of_match_ptr(xgene_slimpro_i2c_dt_ids),
.acpi_match_table = ACPI_PTR(xgene_slimpro_i2c_acpi_ids)
},
};
module_platform_driver(xgene_slimpro_i2c_driver);
MODULE_DESCRIPTION("APM X-Gene SLIMpro I2C driver");
MODULE_AUTHOR("Feng Kan <fkan@apm.com>");
MODULE_AUTHOR("Hieu Le <hnle@apm.com>");
MODULE_LICENSE("GPL");