hollalinux
/
linux-sg2042
mirror of https://github.com/sophgo/linux-riscv.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
linux-sg2042/arch/arm/mach-imx
History
Lucas Stach d438462c20 ARM: imx6: gpc: always enable PU domain if CONFIG_PM is not set 
If CONFIG_PM is not set the PU power domain needs to be enabled always,
otherwise there are two failure scenarios which will hang the system if
one of the devices in the PU domain is accessed.

1. New DTs (4.1+) drop the "always-on" property from the PU regulator, so
if it isn't properly enabled by the GPC code it will be disabled at the
end of boot.

2. If the bootloader already disabled the PU domain the GPC explicitly
needs to enable it again, even if the kernel doesn't do any power
management. This is a bit hypothetical, as it requires to boot a
mainline kernel on a downstream bootloader, as no mainline bootloader
disables the PM domains.

Cc: <stable@vger.kernel.org> # 4.1
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
 		2015-07-08 22:52:08 +08:00
..
devices ARM: mach-imx: devices: platform-sdhci-esdhc-imx: fix broken email address 2015-04-27 20:37:06 +08:00
3ds_debugboard.c ARM: imx: include hardware.h rather than mach/hardware.h 2012-10-15 10:05:43 +08:00
3ds_debugboard.h ARM: imx: include board headers in the same folder 2012-10-15 09:18:14 +08:00
Kconfig ARM: SoC: platform support for v4.2 2015-06-26 11:34:35 -07:00
Makefile ARM: SoC: platform support for v4.2 2015-06-26 11:34:35 -07:00
Makefile.boot ARM: vf610: enable Cortex-M4 configuration on Vybrid SoC 2015-05-20 23:10:14 +02:00
anatop.c ARM: imx: add msl support for imx7d 2015-06-03 14:49:35 +08:00
avic.c ARM: imx: avic: Convert to handle_domain_irq 2014-09-03 13:10:56 +00:00
board-mx31lilly.h ARM: imx: include board headers in the same folder 2012-10-15 09:18:14 +08:00
board-mx31lite.h ARM: imx: include board headers in the same folder 2012-10-15 09:18:14 +08:00
board-mx31moboard.h ARM: imx: include board headers in the same folder 2012-10-15 09:18:14 +08:00
common.h ARM: imx53: Set DDR pins to high impedance when in suspend to RAM. 2015-06-03 14:49:36 +08:00
cpu-imx5.c ARM: imx5: retrieve iim base from device tree 2014-07-18 16:10:07 +08:00
cpu-imx25.c ARM: mx25: Retrieve IIM base from dt 2015-03-13 22:06:35 +08:00
cpu-imx27.c ARM: imx: include hardware.h rather than mach/hardware.h 2012-10-15 10:05:43 +08:00
cpu-imx31.c ARM: imx: include hardware.h rather than mach/hardware.h 2012-10-15 10:05:43 +08:00
cpu-imx35.c ARM: imx: include hardware.h rather than mach/hardware.h 2012-10-15 10:05:43 +08:00
cpu.c ARM: imx: add msl support for imx7d 2015-06-03 14:49:35 +08:00
cpuidle-imx5.c cpuidle: Invert CPUIDLE_FLAG_TIME_VALID logic 2014-11-12 21:17:27 +01:00
cpuidle-imx6q.c ARM: imx6: set initial power mode in pm function 2015-06-03 14:44:31 +08:00
cpuidle-imx6sl.c ARM: imx6: set initial power mode in pm function 2015-06-03 14:44:31 +08:00
cpuidle-imx6sx.c ARM: imx6: set initial power mode in pm function 2015-06-03 14:44:31 +08:00
cpuidle.h ARM: imx: support arm power off in cpuidle for i.mx6sx 2015-01-05 21:34:29 +08:00
crmregs-imx3.h ARM i.MX3: Make ccm base address a variable 2012-04-25 17:03:45 +02:00
devices-imx1.h ARM: imx: move platform device code into mach-imx 2012-10-15 09:18:15 +08:00
devices-imx21.h ARM: imx: move platform device code into mach-imx 2012-10-15 09:18:15 +08:00
devices-imx27.h ARM : i.MX27 : split code for allocation of ressources of camera and eMMA 2012-11-16 16:21:48 +01:00
devices-imx31.h ARM: imx: move platform device code into mach-imx 2012-10-15 09:18:15 +08:00
devices-imx35.h ARM: imx: prepare for removal of flexcan_platform_data 2013-06-27 15:15:08 +02:00
ehci-imx27.c ARM: imx: move EHCI platform defines out of platform_data header 2014-07-18 16:10:04 +08:00
ehci-imx31.c ARM: imx: move EHCI platform defines out of platform_data header 2014-07-18 16:10:04 +08:00
ehci-imx35.c ARM: imx: move EHCI platform defines out of platform_data header 2014-07-18 16:10:04 +08:00
ehci.h ARM: imx5: remove imx51 non-DT support files 2014-07-18 16:10:05 +08:00
epit.c ARM: imx: remove IRQF_DISABLED 2013-10-21 09:11:05 +08:00
eukrea-baseboards.h ARM: i.MX: Remove mach-cpuimx27sd board file 2014-09-01 22:00:01 +08:00
gpc.c ARM: imx6: gpc: always enable PU domain if CONFIG_PM is not set 2015-07-08 22:52:08 +08:00
hardware.h ARM: imx: move revision definitions and declarations into a header 2015-06-03 14:44:30 +08:00
headsmp.S ARM: v7 setup function should invalidate L1 cache 2015-06-01 11:30:26 +01:00
hotplug.c ARM: imx: do not return from imx_cpu_die() call 2013-10-21 09:37:31 +08:00
iim.h ARM: imx: include iim.h rather than mach/iim.h 2012-10-15 10:03:10 +08:00
imx1-dt.c ARM: i.MX1: Add devicetree support 2014-09-16 10:06:44 +08:00
imx27-dt.c ARM: imx: clean up machine mxc_arch_reset_init_dt reset init 2014-11-22 07:39:36 +08:00
imx31-dt.c ARM: imx: clean up machine mxc_arch_reset_init_dt reset init 2014-11-22 07:39:36 +08:00
imx35-dt.c ARM: imx: clean up machine mxc_arch_reset_init_dt reset init 2014-11-22 07:39:36 +08:00
iomux-imx31.c ARM: mach-imx: iomux-imx31: Use DECLARE_BITMAP 2015-06-03 14:49:38 +08:00
iomux-mx1.h ARM: imx: move iomux drivers and headers into mach-imx 2012-10-15 09:18:14 +08:00
iomux-mx2x.h ARM: imx: move iomux drivers and headers into mach-imx 2012-10-15 09:18:14 +08:00
iomux-mx3.h ARM: imx: Fix trivial typo in comments 2015-03-03 12:05:46 +08:00
iomux-mx21.h ARM: imx: move iomux drivers and headers into mach-imx 2012-10-15 09:18:14 +08:00
iomux-mx27.h ARM: imx: move iomux drivers and headers into mach-imx 2012-10-15 09:18:14 +08:00
iomux-mx35.h ARM: imx: move iomux drivers and headers into mach-imx 2012-10-15 09:18:14 +08:00
iomux-v1.c ARM: imx: iomux: Do not export symbol without public declaration 2014-09-01 22:00:01 +08:00
iomux-v1.h ARM: imx: move iomux drivers and headers into mach-imx 2012-10-15 09:18:14 +08:00
iomux-v3.c ARM: imx/iomux-v3: allow pad_list to be const 2015-03-03 12:04:41 +08:00
iomux-v3.h ARM: imx: Fix trivial typo in comments 2015-03-03 12:05:46 +08:00
irq-common.c ARM: imx: irq-common: Include header to avoid sparse warning 2013-06-17 15:45:14 +08:00
irq-common.h ARM: imx: drop support for irq priorisation 2013-12-09 13:18:25 +08:00
mach-apf9328.c ARM: i.MX: Setup IRQ handler from IRQ driver 2014-05-12 22:58:51 +08:00
mach-armadillo5x0.c arm: mach-imx: Convert pr_warning to pr_warn 2014-09-16 10:09:41 +08:00
mach-bug.c ARM: i.MX: Setup IRQ handler from IRQ driver 2014-05-12 22:58:51 +08:00
mach-imx6q.c ARM: imx6: initialize CCM_CLPCR_LPM into RUN mode earlier 2015-06-03 14:49:18 +08:00
mach-imx6sl.c ARM: imx6: initialize CCM_CLPCR_LPM into RUN mode earlier 2015-06-03 14:49:18 +08:00
mach-imx6sx.c ARM: imx6: initialize CCM_CLPCR_LPM into RUN mode earlier 2015-06-03 14:49:18 +08:00
mach-imx7d.c ARM: imx: add msl support for imx7d 2015-06-03 14:49:35 +08:00
mach-imx25.c ARM: mx25: Remove static memory mapping 2015-03-13 22:14:57 +08:00
mach-imx27_visstrim_m10.c ARM: imx: move EHCI platform defines out of platform_data header 2014-07-18 16:10:04 +08:00
mach-imx50.c ARM: imx: clean up machine mxc_arch_reset_init_dt reset init 2014-11-22 07:39:36 +08:00
mach-imx51.c ARM: imx: clean up machine mxc_arch_reset_init_dt reset init 2014-11-22 07:39:36 +08:00
mach-imx53.c ARM: SoC platform changes for 3.19 2014-12-09 14:38:28 -08:00
mach-kzm_arm11_01.c ARM: i.MX: Setup IRQ handler from IRQ driver 2014-05-12 22:58:51 +08:00
mach-ls1021a.c ARM: imx: Add Freescale LS1021A SMP support 2014-11-23 14:56:21 +08:00
mach-mx21ads.c ARM: i.MX: Setup IRQ handler from IRQ driver 2014-05-12 22:58:51 +08:00
mach-mx27_3ds.c ARM: imx: move EHCI platform defines out of platform_data header 2014-07-18 16:10:04 +08:00
mach-mx27ads.c platform: Remove most references to platform_bus device 2014-07-23 19:09:03 -07:00
mach-mx31_3ds.c arm: mach-imx: Convert pr_warning to pr_warn 2014-09-16 10:09:41 +08:00
mach-mx31ads.c ARM: i.MX: Setup IRQ handler from IRQ driver 2014-05-12 22:58:51 +08:00
mach-mx31lilly.c ARM: imx: move EHCI platform defines out of platform_data header 2014-07-18 16:10:04 +08:00
mach-mx31lite.c arm: mach-imx: Convert pr_warning to pr_warn 2014-09-16 10:09:41 +08:00
mach-mx31moboard.c ARM: imx: use PTR_ERR_OR_ZERO 2014-07-18 16:11:36 +08:00
mach-mx35_3ds.c ARM: imx/iomux-v3: allow pad_list to be const 2015-03-03 12:04:41 +08:00
mach-pca100.c ARM: imx: move EHCI platform defines out of platform_data header 2014-07-18 16:10:04 +08:00
mach-pcm037.c arm: mach-imx: Convert pr_warning to pr_warn 2014-09-16 10:09:41 +08:00
mach-pcm037_eet.c ARM: imx: include common.h rather than mach/common.h 2012-10-15 10:03:10 +08:00
mach-pcm043.c ARM: imx/iomux-v3: allow pad_list to be const 2015-03-03 12:04:41 +08:00
mach-qong.c ARM: i.MX: Setup IRQ handler from IRQ driver 2014-05-12 22:58:51 +08:00
mach-scb9328.c ARM: i.MX: Setup IRQ handler from IRQ driver 2014-05-12 22:58:51 +08:00
mach-vf610.c ARM: vf610: enable Cortex-M4 configuration on Vybrid SoC 2015-05-20 23:10:14 +02:00
mach-vpr200.c ARM: imx/iomux-v3: allow pad_list to be const 2015-03-03 12:04:41 +08:00
mm-imx1.c ARM: imx: move clk_prepare() out from mxc_restart() 2013-06-17 15:45:10 +08:00
mm-imx3.c Merge branch 'for-linus' of git://git.linaro.org/people/rmk/linux-arm 2013-07-03 09:46:29 -07:00
mm-imx21.c ARM: imx: move clk_prepare() out from mxc_restart() 2013-06-17 15:45:10 +08:00
mm-imx27.c ARM: imx: move clk_prepare() out from mxc_restart() 2013-06-17 15:45:10 +08:00
mmdc.c ARM: imx: mmdc: Include "common.h" header file 2015-06-03 14:49:34 +08:00
mx1.h ARM: imx: include hardware.h rather than mach/hardware.h 2012-10-15 10:05:43 +08:00
mx2x.h ARM: imx: include hardware.h rather than mach/hardware.h 2012-10-15 10:05:43 +08:00
mx3x.h ARM: imx: move revision definitions and declarations into a header 2015-06-03 14:44:30 +08:00
mx21.h ARM: imx: include hardware.h rather than mach/hardware.h 2012-10-15 10:05:43 +08:00
mx27.h ARM: imx: move revision definitions and declarations into a header 2015-06-03 14:44:30 +08:00
mx31.h ARM: imx: include hardware.h rather than mach/hardware.h 2012-10-15 10:05:43 +08:00
mx31lilly-db.c ARM: imx: remove IRQF_DISABLED 2013-10-21 09:11:05 +08:00
mx31lite-db.c ARM: imx: include hardware.h rather than mach/hardware.h 2012-10-15 10:05:43 +08:00
mx31moboard-devboard.c ARM: imx: use PTR_ERR_OR_ZERO 2014-07-18 16:11:36 +08:00
mx31moboard-marxbot.c ARM: imx: use PTR_ERR_OR_ZERO 2014-07-18 16:11:36 +08:00
mx31moboard-smartbot.c ARM: imx: use PTR_ERR_OR_ZERO 2014-07-18 16:11:36 +08:00
mx35.h ARM: imx: include hardware.h rather than mach/hardware.h 2012-10-15 10:05:43 +08:00
mxc.h ARM: imx: add msl support for imx7d 2015-06-03 14:49:35 +08:00
pcm037.h ARM: imx: use machine specific hook for late init 2012-05-08 20:36:16 +08:00
platsmp.c ARM: imx: Add Freescale LS1021A SMP support 2014-11-23 14:56:21 +08:00
pm-imx3.c ARM: imx: include hardware.h rather than mach/hardware.h 2012-10-15 10:05:43 +08:00
pm-imx5.c genalloc: rename dev_get_gen_pool() to gen_pool_get() 2015-06-30 19:45:01 -07:00
pm-imx6.c genalloc: rename dev_get_gen_pool() to gen_pool_get() 2015-06-30 19:45:01 -07:00
pm-imx27.c ARM: imx: include hardware.h rather than mach/hardware.h 2012-10-15 10:05:43 +08:00
src.c ARM: imx: remove imx_src_prepare_restart() call 2013-11-11 22:58:43 +08:00
ssi-fiq-ksym.c ARM: imx: merge plat-mxc into mach-imx 2012-10-15 10:02:19 +08:00
ssi-fiq.S ARM: imx: merge plat-mxc into mach-imx 2012-10-15 10:02:19 +08:00
suspend-imx6.S ARM: imx: replace cpu type check with ddr type check 2014-11-23 14:56:17 +08:00
suspend-imx53.S ARM: imx53: Set DDR pins to high impedance when in suspend to RAM. 2015-06-03 14:49:36 +08:00
system.c ARM: imx: clean up machine mxc_arch_reset_init_dt reset init 2014-11-22 07:39:36 +08:00
tzic.c ARM: imx: tzic: Convert to handle_domain_irq 2014-09-03 13:10:57 +00:00
ulpi.h ARM: imx: Remove mxc specific ulpi access ops 2013-06-17 15:45:16 +08:00