linux-sg2042/drivers/pci/msi.h

157 lines
5.5 KiB
C

/*
* Copyright (C) 2003-2004 Intel
* Copyright (C) Tom Long Nguyen (tom.l.nguyen@intel.com)
*/
#ifndef MSI_H
#define MSI_H
/*
* MSI operation vector. Used by the msi core code (drivers/pci/msi.c)
* to abstract platform-specific tasks relating to MSI address generation
* and resource management.
*/
struct msi_ops {
/**
* setup - generate an MSI bus address and data for a given vector
* @pdev: PCI device context (in)
* @vector: vector allocated by the msi core (in)
* @addr_hi: upper 32 bits of PCI bus MSI address (out)
* @addr_lo: lower 32 bits of PCI bus MSI address (out)
* @data: MSI data payload (out)
*
* Description: The setup op is used to generate a PCI bus addres and
* data which the msi core will program into the card MSI capability
* registers. The setup routine is responsible for picking an initial
* cpu to target the MSI at. The setup routine is responsible for
* examining pdev to determine the MSI capabilities of the card and
* generating a suitable address/data. The setup routine is
* responsible for allocating and tracking any system resources it
* needs to route the MSI to the cpu it picks, and for associating
* those resources with the passed in vector.
*
* Returns 0 if the MSI address/data was successfully setup.
**/
int (*setup) (struct pci_dev *pdev, unsigned int vector,
u32 *addr_hi, u32 *addr_lo, u32 *data);
/**
* teardown - release resources allocated by setup
* @vector: vector context for resources (in)
*
* Description: The teardown op is used to release any resources
* that were allocated in the setup routine associated with the passed
* in vector.
**/
void (*teardown) (unsigned int vector);
/**
* target - retarget an MSI at a different cpu
* @vector: vector context for resources (in)
* @cpu: new cpu to direct vector at (in)
* @addr_hi: new value of PCI bus upper 32 bits (in/out)
* @addr_lo: new value of PCI bus lower 32 bits (in/out)
*
* Description: The target op is used to redirect an MSI vector
* at a different cpu. addr_hi/addr_lo coming in are the existing
* values that the MSI core has programmed into the card. The
* target code is responsible for freeing any resources (if any)
* associated with the old address, and generating a new PCI bus
* addr_hi/addr_lo that will redirect the vector at the indicated cpu.
**/
void (*target) (unsigned int vector, unsigned int cpu,
u32 *addr_hi, u32 *addr_lo);
};
extern int msi_register(struct msi_ops *ops);
#include <asm/msi.h>
/*
* Assume the maximum number of hot plug slots supported by the system is about
* ten. The worstcase is that each of these slots is hot-added with a device,
* which has two MSI/MSI-X capable functions. To avoid any MSI-X driver, which
* attempts to request all available vectors, NR_HP_RESERVED_VECTORS is defined
* as below to ensure at least one message is assigned to each detected MSI/
* MSI-X device function.
*/
#define NR_HP_RESERVED_VECTORS 20
extern int vector_irq[NR_VECTORS];
extern void (*interrupt[NR_IRQS])(void);
extern int pci_vector_resources(int last, int nr_released);
/*
* MSI-X Address Register
*/
#define PCI_MSIX_FLAGS_QSIZE 0x7FF
#define PCI_MSIX_FLAGS_ENABLE (1 << 15)
#define PCI_MSIX_FLAGS_BIRMASK (7 << 0)
#define PCI_MSIX_FLAGS_BITMASK (1 << 0)
#define PCI_MSIX_ENTRY_SIZE 16
#define PCI_MSIX_ENTRY_LOWER_ADDR_OFFSET 0
#define PCI_MSIX_ENTRY_UPPER_ADDR_OFFSET 4
#define PCI_MSIX_ENTRY_DATA_OFFSET 8
#define PCI_MSIX_ENTRY_VECTOR_CTRL_OFFSET 12
#define msi_control_reg(base) (base + PCI_MSI_FLAGS)
#define msi_lower_address_reg(base) (base + PCI_MSI_ADDRESS_LO)
#define msi_upper_address_reg(base) (base + PCI_MSI_ADDRESS_HI)
#define msi_data_reg(base, is64bit) \
( (is64bit == 1) ? base+PCI_MSI_DATA_64 : base+PCI_MSI_DATA_32 )
#define msi_mask_bits_reg(base, is64bit) \
( (is64bit == 1) ? base+PCI_MSI_MASK_BIT : base+PCI_MSI_MASK_BIT-4)
#define msi_disable(control) control &= ~PCI_MSI_FLAGS_ENABLE
#define multi_msi_capable(control) \
(1 << ((control & PCI_MSI_FLAGS_QMASK) >> 1))
#define multi_msi_enable(control, num) \
control |= (((num >> 1) << 4) & PCI_MSI_FLAGS_QSIZE);
#define is_64bit_address(control) (control & PCI_MSI_FLAGS_64BIT)
#define is_mask_bit_support(control) (control & PCI_MSI_FLAGS_MASKBIT)
#define msi_enable(control, num) multi_msi_enable(control, num); \
control |= PCI_MSI_FLAGS_ENABLE
#define msix_table_offset_reg(base) (base + 0x04)
#define msix_pba_offset_reg(base) (base + 0x08)
#define msix_enable(control) control |= PCI_MSIX_FLAGS_ENABLE
#define msix_disable(control) control &= ~PCI_MSIX_FLAGS_ENABLE
#define msix_table_size(control) ((control & PCI_MSIX_FLAGS_QSIZE)+1)
#define multi_msix_capable msix_table_size
#define msix_unmask(address) (address & ~PCI_MSIX_FLAGS_BITMASK)
#define msix_mask(address) (address | PCI_MSIX_FLAGS_BITMASK)
#define msix_is_pending(address) (address & PCI_MSIX_FLAGS_PENDMASK)
struct msi_desc {
struct {
__u8 type : 5; /* {0: unused, 5h:MSI, 11h:MSI-X} */
__u8 maskbit : 1; /* mask-pending bit supported ? */
__u8 state : 1; /* {0: free, 1: busy} */
__u8 reserved: 1; /* reserved */
__u8 entry_nr; /* specific enabled entry */
__u8 default_vector; /* default pre-assigned vector */
__u8 unused; /* formerly unused destination cpu*/
}msi_attrib;
struct {
__u16 head;
__u16 tail;
}link;
void __iomem *mask_base;
struct pci_dev *dev;
#ifdef CONFIG_PM
/* PM save area for MSIX address/data */
u32 address_hi_save;
u32 address_lo_save;
u32 data_save;
#endif
};
#endif /* MSI_H */