hollalinux
/
linux-sg2042
mirror of https://github.com/sophgo/linux-riscv.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
linux-sg2042/drivers/scsi/aic7xxx/aiclib.h

1086 lines
27 KiB
C
Raw Blame History

/*
* Largely written by Julian Elischer (julian@tfs.com)
* for TRW Financial Systems.
*
* TRW Financial Systems, in accordance with their agreement with Carnegie
* Mellon University, makes this software available to CMU to distribute
* or use in any manner that they see fit as long as this message is kept with
* the software. For this reason TFS also grants any other persons or
* organisations permission to use or modify this software.
*
* TFS supplies this software to be publicly redistributed
* on the understanding that TFS is not responsible for the correct
* functioning of this software in any circumstances.
*
* Ported to run under 386BSD by Julian Elischer (julian@tfs.com) Sept 1992
*
* $FreeBSD: src/sys/cam/scsi/scsi_all.h,v 1.21 2002/10/08 17:12:44 ken Exp $
*
* Copyright (c) 2003 Adaptec Inc.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* substantially similar to the "NO WARRANTY" disclaimer below
* ("Disclaimer") and any redistribution must be conditioned upon
* including a substantially similar Disclaimer requirement for further
* binary redistribution.
* 3. Neither the names of the above-listed copyright holders nor the names
* of any contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* NO WARRANTY
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*
* $Id$
*/
#ifndef _AICLIB_H
#define _AICLIB_H
/*
* Linux Interrupt Support.
*/
#ifndef IRQ_RETVAL
typedef void irqreturn_t;
#define IRQ_RETVAL(x)
#endif
/*
* SCSI command format
*/
/*
* Define dome bits that are in ALL (or a lot of) scsi commands
*/
#define SCSI_CTL_LINK 0x01
#define SCSI_CTL_FLAG 0x02
#define SCSI_CTL_VENDOR 0xC0
#define SCSI_CMD_LUN 0xA0 /* these two should not be needed */
#define SCSI_CMD_LUN_SHIFT 5 /* LUN in the cmd is no longer SCSI */
#define SCSI_MAX_CDBLEN 16 /*
* 16 byte commands are in the
* SCSI-3 spec
*/
/* 6byte CDBs special case 0 length to be 256 */
#define SCSI_CDB6_LEN(len) ((len) == 0 ? 256 : len)
/*
* This type defines actions to be taken when a particular sense code is
* received. Right now, these flags are only defined to take up 16 bits,
* but can be expanded in the future if necessary.
*/
typedef enum {
SS_NOP = 0x000000, /* Do nothing */
SS_RETRY = 0x010000, /* Retry the command */
SS_FAIL = 0x020000, /* Bail out */
SS_START = 0x030000, /* Send a Start Unit command to the device,
* then retry the original command.
*/
SS_TUR = 0x040000, /* Send a Test Unit Ready command to the
* device, then retry the original command.
*/
SS_REQSENSE = 0x050000, /* Send a RequestSense command to the
* device, then retry the original command.
*/
SS_INQ_REFRESH = 0x060000,
SS_MASK = 0xff0000
} aic_sense_action;
typedef enum {
SSQ_NONE = 0x0000,
SSQ_DECREMENT_COUNT = 0x0100, /* Decrement the retry count */
SSQ_MANY = 0x0200, /* send lots of recovery commands */
SSQ_RANGE = 0x0400, /*
* This table entry represents the
* end of a range of ASCQs that
* have identical error actions
* and text.
*/
SSQ_PRINT_SENSE = 0x0800,
SSQ_DELAY = 0x1000, /* Delay before retry. */
SSQ_DELAY_RANDOM = 0x2000, /* Randomized delay before retry. */
SSQ_FALLBACK = 0x4000, /* Do a speed fallback to recover */
SSQ_MASK = 0xff00
} aic_sense_action_qualifier;
/* Mask for error status values */
#define SS_ERRMASK 0xff
/* The default, retyable, error action */
#define SS_RDEF SS_RETRY|SSQ_DECREMENT_COUNT|SSQ_PRINT_SENSE|EIO
/* The retyable, error action, with table specified error code */
#define SS_RET SS_RETRY|SSQ_DECREMENT_COUNT|SSQ_PRINT_SENSE
/* Fatal error action, with table specified error code */
#define SS_FATAL SS_FAIL|SSQ_PRINT_SENSE
struct scsi_generic
{
uint8_t opcode;
uint8_t bytes[11];
};
struct scsi_request_sense
{
uint8_t opcode;
uint8_t byte2;
uint8_t unused[2];
uint8_t length;
uint8_t control;
};
struct scsi_test_unit_ready
{
uint8_t opcode;
uint8_t byte2;
uint8_t unused[3];
uint8_t control;
};
struct scsi_send_diag
{
uint8_t opcode;
uint8_t byte2;
#define SSD_UOL 0x01
#define SSD_DOL 0x02
#define SSD_SELFTEST 0x04
#define SSD_PF 0x10
uint8_t unused[1];
uint8_t paramlen[2];
uint8_t control;
};
struct scsi_sense
{
uint8_t opcode;
uint8_t byte2;
uint8_t unused[2];
uint8_t length;
uint8_t control;
};
struct scsi_inquiry
{
uint8_t opcode;
uint8_t byte2;
#define SI_EVPD 0x01
uint8_t page_code;
uint8_t reserved;
uint8_t length;
uint8_t control;
};
struct scsi_mode_sense_6
{
uint8_t opcode;
uint8_t byte2;
#define SMS_DBD 0x08
uint8_t page;
#define SMS_PAGE_CODE 0x3F
#define SMS_VENDOR_SPECIFIC_PAGE 0x00
#define SMS_DISCONNECT_RECONNECT_PAGE 0x02
#define SMS_PERIPHERAL_DEVICE_PAGE 0x09
#define SMS_CONTROL_MODE_PAGE 0x0A
#define SMS_ALL_PAGES_PAGE 0x3F
#define SMS_PAGE_CTRL_MASK 0xC0
#define SMS_PAGE_CTRL_CURRENT 0x00
#define SMS_PAGE_CTRL_CHANGEABLE 0x40
#define SMS_PAGE_CTRL_DEFAULT 0x80
#define SMS_PAGE_CTRL_SAVED 0xC0
uint8_t unused;
uint8_t length;
uint8_t control;
};
struct scsi_mode_sense_10
{
uint8_t opcode;
uint8_t byte2; /* same bits as small version */
uint8_t page; /* same bits as small version */
uint8_t unused[4];
uint8_t length[2];
uint8_t control;
};
struct scsi_mode_select_6
{
uint8_t opcode;
uint8_t byte2;
#define SMS_SP 0x01
#define SMS_PF 0x10
uint8_t unused[2];
uint8_t length;
uint8_t control;
};
struct scsi_mode_select_10
{
uint8_t opcode;
uint8_t byte2; /* same bits as small version */
uint8_t unused[5];
uint8_t length[2];
uint8_t control;
};
/*
* When sending a mode select to a tape drive, the medium type must be 0.
*/
struct scsi_mode_hdr_6
{
uint8_t datalen;
uint8_t medium_type;
uint8_t dev_specific;
uint8_t block_descr_len;
};
struct scsi_mode_hdr_10
{
uint8_t datalen[2];
uint8_t medium_type;
uint8_t dev_specific;
uint8_t reserved[2];
uint8_t block_descr_len[2];
};
struct scsi_mode_block_descr
{
uint8_t density_code;
uint8_t num_blocks[3];
uint8_t reserved;
uint8_t block_len[3];
};
struct scsi_log_sense
{
uint8_t opcode;
uint8_t byte2;
#define SLS_SP 0x01
#define SLS_PPC 0x02
uint8_t page;
#define SLS_PAGE_CODE 0x3F
#define SLS_ALL_PAGES_PAGE 0x00
#define SLS_OVERRUN_PAGE 0x01
#define SLS_ERROR_WRITE_PAGE 0x02
#define SLS_ERROR_READ_PAGE 0x03
#define SLS_ERROR_READREVERSE_PAGE 0x04
#define SLS_ERROR_VERIFY_PAGE 0x05
#define SLS_ERROR_NONMEDIUM_PAGE 0x06
#define SLS_ERROR_LASTN_PAGE 0x07
#define SLS_PAGE_CTRL_MASK 0xC0
#define SLS_PAGE_CTRL_THRESHOLD 0x00
#define SLS_PAGE_CTRL_CUMULATIVE 0x40
#define SLS_PAGE_CTRL_THRESH_DEFAULT 0x80
#define SLS_PAGE_CTRL_CUMUL_DEFAULT 0xC0
uint8_t reserved[2];
uint8_t paramptr[2];
uint8_t length[2];
uint8_t control;
};
struct scsi_log_select
{
uint8_t opcode;
uint8_t byte2;
/* SLS_SP 0x01 */
#define SLS_PCR 0x02
uint8_t page;
/* SLS_PAGE_CTRL_MASK 0xC0 */
/* SLS_PAGE_CTRL_THRESHOLD 0x00 */
/* SLS_PAGE_CTRL_CUMULATIVE 0x40 */
/* SLS_PAGE_CTRL_THRESH_DEFAULT 0x80 */
/* SLS_PAGE_CTRL_CUMUL_DEFAULT 0xC0 */
uint8_t reserved[4];
uint8_t length[2];
uint8_t control;
};
struct scsi_log_header
{
uint8_t page;
uint8_t reserved;
uint8_t datalen[2];
};
struct scsi_log_param_header {
uint8_t param_code[2];
uint8_t param_control;
#define SLP_LP 0x01
#define SLP_LBIN 0x02
#define SLP_TMC_MASK 0x0C
#define SLP_TMC_ALWAYS 0x00
#define SLP_TMC_EQUAL 0x04
#define SLP_TMC_NOTEQUAL 0x08
#define SLP_TMC_GREATER 0x0C
#define SLP_ETC 0x10
#define SLP_TSD 0x20
#define SLP_DS 0x40
#define SLP_DU 0x80
uint8_t param_len;
};
struct scsi_control_page {
uint8_t page_code;
uint8_t page_length;
uint8_t rlec;
#define SCB_RLEC 0x01 /*Report Log Exception Cond*/
uint8_t queue_flags;
#define SCP_QUEUE_ALG_MASK 0xF0
#define SCP_QUEUE_ALG_RESTRICTED 0x00
#define SCP_QUEUE_ALG_UNRESTRICTED 0x10
#define SCP_QUEUE_ERR 0x02 /*Queued I/O aborted for CACs*/
#define SCP_QUEUE_DQUE 0x01 /*Queued I/O disabled*/
uint8_t eca_and_aen;
#define SCP_EECA 0x80 /*Enable Extended CA*/
#define SCP_RAENP 0x04 /*Ready AEN Permission*/
#define SCP_UAAENP 0x02 /*UA AEN Permission*/
#define SCP_EAENP 0x01 /*Error AEN Permission*/
uint8_t reserved;
uint8_t aen_holdoff_period[2];
};
struct scsi_reserve
{
uint8_t opcode;
uint8_t byte2;
uint8_t unused[2];
uint8_t length;
uint8_t control;
};
struct scsi_release
{
uint8_t opcode;
uint8_t byte2;
uint8_t unused[2];
uint8_t length;
uint8_t control;
};
struct scsi_prevent
{
uint8_t opcode;
uint8_t byte2;
uint8_t unused[2];
uint8_t how;
uint8_t control;
};
#define PR_PREVENT 0x01
#define PR_ALLOW 0x00
struct scsi_sync_cache
{
uint8_t opcode;
uint8_t byte2;
uint8_t begin_lba[4];
uint8_t reserved;
uint8_t lb_count[2];
uint8_t control;
};
struct scsi_changedef
{
uint8_t opcode;
uint8_t byte2;
uint8_t unused1;
uint8_t how;
uint8_t unused[4];
uint8_t datalen;
uint8_t control;
};
struct scsi_read_buffer
{
uint8_t opcode;
uint8_t byte2;
#define RWB_MODE 0x07
#define RWB_MODE_HDR_DATA 0x00
#define RWB_MODE_DATA 0x02
#define RWB_MODE_DOWNLOAD 0x04
#define RWB_MODE_DOWNLOAD_SAVE 0x05
uint8_t buffer_id;
uint8_t offset[3];
uint8_t length[3];
uint8_t control;
};
struct scsi_write_buffer
{
uint8_t opcode;
uint8_t byte2;
uint8_t buffer_id;
uint8_t offset[3];
uint8_t length[3];
uint8_t control;
};
struct scsi_rw_6
{
uint8_t opcode;
uint8_t addr[3];
/* only 5 bits are valid in the MSB address byte */
#define SRW_TOPADDR 0x1F
uint8_t length;
uint8_t control;
};
struct scsi_rw_10
{
uint8_t opcode;
#define SRW10_RELADDR 0x01
#define SRW10_FUA 0x08
#define SRW10_DPO 0x10
uint8_t byte2;
uint8_t addr[4];
uint8_t reserved;
uint8_t length[2];
uint8_t control;
};
struct scsi_rw_12
{
uint8_t opcode;
#define SRW12_RELADDR 0x01
#define SRW12_FUA 0x08
#define SRW12_DPO 0x10
uint8_t byte2;
uint8_t addr[4];
uint8_t length[4];
uint8_t reserved;
uint8_t control;
};
struct scsi_start_stop_unit
{
uint8_t opcode;
uint8_t byte2;
#define SSS_IMMED 0x01
uint8_t reserved[2];
uint8_t how;
#define SSS_START 0x01
#define SSS_LOEJ 0x02
uint8_t control;
};
#define SC_SCSI_1 0x01
#define SC_SCSI_2 0x03
/*
* Opcodes
*/
#define TEST_UNIT_READY 0x00
#define REQUEST_SENSE 0x03
#define READ_6 0x08
#define WRITE_6 0x0a
#define INQUIRY 0x12
#define MODE_SELECT_6 0x15
#define MODE_SENSE_6 0x1a
#define START_STOP_UNIT 0x1b
#define START_STOP 0x1b
#define RESERVE 0x16
#define RELEASE 0x17
#define RECEIVE_DIAGNOSTIC 0x1c
#define SEND_DIAGNOSTIC 0x1d
#define PREVENT_ALLOW 0x1e
#define READ_CAPACITY 0x25
#define READ_10 0x28
#define WRITE_10 0x2a
#define POSITION_TO_ELEMENT 0x2b
#define SYNCHRONIZE_CACHE 0x35
#define WRITE_BUFFER 0x3b
#define READ_BUFFER 0x3c
#define CHANGE_DEFINITION 0x40
#define LOG_SELECT 0x4c
#define LOG_SENSE 0x4d
#ifdef XXXCAM
#define MODE_SENSE_10 0x5A
#endif
#define MODE_SELECT_10 0x55
#define MOVE_MEDIUM 0xa5
#define READ_12 0xa8
#define WRITE_12 0xaa
#define READ_ELEMENT_STATUS 0xb8
/*
* Device Types
*/
#define T_DIRECT 0x00
#define T_SEQUENTIAL 0x01
#define T_PRINTER 0x02
#define T_PROCESSOR 0x03
#define T_WORM 0x04
#define T_CDROM 0x05
#define T_SCANNER 0x06
#define T_OPTICAL 0x07
#define T_CHANGER 0x08
#define T_COMM 0x09
#define T_ASC0 0x0a
#define T_ASC1 0x0b
#define T_STORARRAY 0x0c
#define T_ENCLOSURE 0x0d
#define T_RBC 0x0e
#define T_OCRW 0x0f
#define T_NODEVICE 0x1F
#define T_ANY 0xFF /* Used in Quirk table matches */
#define T_REMOV 1
#define T_FIXED 0
/*
* This length is the initial inquiry length used by the probe code, as
* well as the legnth necessary for aic_print_inquiry() to function
* correctly. If either use requires a different length in the future,
* the two values should be de-coupled.
*/
#define SHORT_INQUIRY_LENGTH 36
struct scsi_inquiry_data
{
uint8_t device;
#define SID_TYPE(inq_data) ((inq_data)->device & 0x1f)
#define SID_QUAL(inq_data) (((inq_data)->device & 0xE0) >> 5)
#define SID_QUAL_LU_CONNECTED 0x00 /*
* The specified peripheral device
* type is currently connected to
* logical unit. If the target cannot
* determine whether or not a physical
* device is currently connected, it
* shall also use this peripheral
* qualifier when returning the INQUIRY
* data. This peripheral qualifier
* does not mean that the device is
* ready for access by the initiator.
*/
#define SID_QUAL_LU_OFFLINE 0x01 /*
* The target is capable of supporting
* the specified peripheral device type
* on this logical unit; however, the
* physical device is not currently
* connected to this logical unit.
*/
#define SID_QUAL_RSVD 0x02
#define SID_QUAL_BAD_LU 0x03 /*
* The target is not capable of
* supporting a physical device on
* this logical unit. For this
* peripheral qualifier the peripheral
* device type shall be set to 1Fh to
* provide compatibility with previous
* versions of SCSI. All other
* peripheral device type values are
* reserved for this peripheral
* qualifier.
*/
#define SID_QUAL_IS_VENDOR_UNIQUE(inq_data) ((SID_QUAL(inq_data) & 0x08) != 0)
uint8_t dev_qual2;
#define SID_QUAL2 0x7F
#define SID_IS_REMOVABLE(inq_data) (((inq_data)->dev_qual2 & 0x80) != 0)
uint8_t version;
#define SID_ANSI_REV(inq_data) ((inq_data)->version & 0x07)
#define SCSI_REV_0 0
#define SCSI_REV_CCS 1
#define SCSI_REV_2 2
#define SCSI_REV_SPC 3
#define SCSI_REV_SPC2 4
#define SID_ECMA 0x38
#define SID_ISO 0xC0
uint8_t response_format;
#define SID_AENC 0x80
#define SID_TrmIOP 0x40
uint8_t additional_length;
uint8_t reserved[2];
uint8_t flags;
#define SID_SftRe 0x01
#define SID_CmdQue 0x02
#define SID_Linked 0x08
#define SID_Sync 0x10
#define SID_WBus16 0x20
#define SID_WBus32 0x40
#define SID_RelAdr 0x80
#define SID_VENDOR_SIZE 8
char vendor[SID_VENDOR_SIZE];
#define SID_PRODUCT_SIZE 16
char product[SID_PRODUCT_SIZE];
#define SID_REVISION_SIZE 4
char revision[SID_REVISION_SIZE];
/*
* The following fields were taken from SCSI Primary Commands - 2
* (SPC-2) Revision 14, Dated 11 November 1999
*/
#define SID_VENDOR_SPECIFIC_0_SIZE 20
uint8_t vendor_specific0[SID_VENDOR_SPECIFIC_0_SIZE];
/*
* An extension of SCSI Parallel Specific Values
*/
#define SID_SPI_IUS 0x01
#define SID_SPI_QAS 0x02
#define SID_SPI_CLOCK_ST 0x00
#define SID_SPI_CLOCK_DT 0x04
#define SID_SPI_CLOCK_DT_ST 0x0C
#define SID_SPI_MASK 0x0F
uint8_t spi3data;
uint8_t reserved2;
/*
* Version Descriptors, stored 2 byte values.
*/
uint8_t version1[2];
uint8_t version2[2];
uint8_t version3[2];
uint8_t version4[2];
uint8_t version5[2];
uint8_t version6[2];
uint8_t version7[2];
uint8_t version8[2];
uint8_t reserved3[22];
#define SID_VENDOR_SPECIFIC_1_SIZE 160
uint8_t vendor_specific1[SID_VENDOR_SPECIFIC_1_SIZE];
};
struct scsi_vpd_unit_serial_number
{
uint8_t device;
uint8_t page_code;
#define SVPD_UNIT_SERIAL_NUMBER 0x80
uint8_t reserved;
uint8_t length; /* serial number length */
#define SVPD_SERIAL_NUM_SIZE 251
uint8_t serial_num[SVPD_SERIAL_NUM_SIZE];
};
struct scsi_read_capacity
{
uint8_t opcode;
uint8_t byte2;
uint8_t addr[4];
uint8_t unused[3];
uint8_t control;
};
struct scsi_read_capacity_data
{
uint8_t addr[4];
uint8_t length[4];
};
struct scsi_report_luns
{
uint8_t opcode;
uint8_t byte2;
uint8_t unused[3];
uint8_t addr[4];
uint8_t control;
};
struct scsi_report_luns_data {
uint8_t length[4]; /* length of LUN inventory, in bytes */
uint8_t reserved[4]; /* unused */
/*
* LUN inventory- we only support the type zero form for now.
*/
struct {
uint8_t lundata[8];
} luns[1];
};
#define RPL_LUNDATA_ATYP_MASK 0xc0 /* MBZ for type 0 lun */
#define RPL_LUNDATA_T0LUN 1 /* @ lundata[1] */
struct scsi_sense_data
{
uint8_t error_code;
#define SSD_ERRCODE 0x7F
#define SSD_CURRENT_ERROR 0x70
#define SSD_DEFERRED_ERROR 0x71
#define SSD_ERRCODE_VALID 0x80
uint8_t segment;
uint8_t flags;
#define SSD_KEY 0x0F
#define SSD_KEY_NO_SENSE 0x00
#define SSD_KEY_RECOVERED_ERROR 0x01
#define SSD_KEY_NOT_READY 0x02
#define SSD_KEY_MEDIUM_ERROR 0x03
#define SSD_KEY_HARDWARE_ERROR 0x04
#define SSD_KEY_ILLEGAL_REQUEST 0x05
#define SSD_KEY_UNIT_ATTENTION 0x06
#define SSD_KEY_DATA_PROTECT 0x07
#define SSD_KEY_BLANK_CHECK 0x08
#define SSD_KEY_Vendor_Specific 0x09
#define SSD_KEY_COPY_ABORTED 0x0a
#define SSD_KEY_ABORTED_COMMAND 0x0b
#define SSD_KEY_EQUAL 0x0c
#define SSD_KEY_VOLUME_OVERFLOW 0x0d
#define SSD_KEY_MISCOMPARE 0x0e
#define SSD_KEY_RESERVED 0x0f
#define SSD_ILI 0x20
#define SSD_EOM 0x40
#define SSD_FILEMARK 0x80
uint8_t info[4];
uint8_t extra_len;
uint8_t cmd_spec_info[4];
uint8_t add_sense_code;
uint8_t add_sense_code_qual;
uint8_t fru;
uint8_t sense_key_spec[3];
#define SSD_SCS_VALID 0x80
#define SSD_FIELDPTR_CMD 0x40
#define SSD_BITPTR_VALID 0x08
#define SSD_BITPTR_VALUE 0x07
#define SSD_MIN_SIZE 18
uint8_t extra_bytes[14];
#define SSD_FULL_SIZE sizeof(struct scsi_sense_data)
};
struct scsi_mode_header_6
{
uint8_t data_length; /* Sense data length */
uint8_t medium_type;
uint8_t dev_spec;
uint8_t blk_desc_len;
};
struct scsi_mode_header_10
{
uint8_t data_length[2];/* Sense data length */
uint8_t medium_type;
uint8_t dev_spec;
uint8_t unused[2];
uint8_t blk_desc_len[2];
};
struct scsi_mode_page_header
{
uint8_t page_code;
uint8_t page_length;
};
struct scsi_mode_blk_desc
{
uint8_t density;
uint8_t nblocks[3];
uint8_t reserved;
uint8_t blklen[3];
};
#define SCSI_DEFAULT_DENSITY 0x00 /* use 'default' density */
#define SCSI_SAME_DENSITY 0x7f /* use 'same' density- >= SCSI-2 only */
/*
* Status Byte
*/
#define SCSI_STATUS_OK 0x00
#define SCSI_STATUS_CHECK_COND 0x02
#define SCSI_STATUS_COND_MET 0x04
#define SCSI_STATUS_BUSY 0x08
#define SCSI_STATUS_INTERMED 0x10
#define SCSI_STATUS_INTERMED_COND_MET 0x14
#define SCSI_STATUS_RESERV_CONFLICT 0x18
#define SCSI_STATUS_CMD_TERMINATED 0x22 /* Obsolete in SAM-2 */
#define SCSI_STATUS_QUEUE_FULL 0x28
#define SCSI_STATUS_ACA_ACTIVE 0x30
#define SCSI_STATUS_TASK_ABORTED 0x40
struct scsi_inquiry_pattern {
uint8_t type;
uint8_t media_type;
#define SIP_MEDIA_REMOVABLE 0x01
#define SIP_MEDIA_FIXED 0x02
const char *vendor;
const char *product;
const char *revision;
};
struct scsi_static_inquiry_pattern {
uint8_t type;
uint8_t media_type;
char vendor[SID_VENDOR_SIZE+1];
char product[SID_PRODUCT_SIZE+1];
char revision[SID_REVISION_SIZE+1];
};
struct scsi_sense_quirk_entry {
struct scsi_inquiry_pattern inq_pat;
int num_sense_keys;
int num_ascs;
struct sense_key_table_entry *sense_key_info;
struct asc_table_entry *asc_info;
};
struct sense_key_table_entry {
uint8_t sense_key;
uint32_t action;
const char *desc;
};
struct asc_table_entry {
uint8_t asc;
uint8_t ascq;
uint32_t action;
const char *desc;
};
struct op_table_entry {
uint8_t opcode;
uint16_t opmask;
const char *desc;
};
struct scsi_op_quirk_entry {
struct scsi_inquiry_pattern inq_pat;
int num_ops;
struct op_table_entry *op_table;
};
typedef enum {
SSS_FLAG_NONE = 0x00,
SSS_FLAG_PRINT_COMMAND = 0x01
} scsi_sense_string_flags;
extern const char *scsi_sense_key_text[];
/************************* Large Disk Handling ********************************/
#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
static __inline int aic_sector_div(u_long capacity, int heads, int sectors);
static __inline int
aic_sector_div(u_long capacity, int heads, int sectors)
{
return (capacity / (heads * sectors));
}
#else
static __inline int aic_sector_div(sector_t capacity, int heads, int sectors);
static __inline int
aic_sector_div(sector_t capacity, int heads, int sectors)
{
/* ugly, ugly sector_div calling convention.. */
sector_div(capacity, (heads * sectors));
return (int)capacity;
}
#endif
/**************************** Module Library Hack *****************************/
/*
* What we'd like to do is have a single "scsi library" module that both the
* aic7xxx and aic79xx drivers could load and depend on. A cursory examination
* of implementing module dependencies in Linux (handling the install and
* initrd cases) does not look promissing. For now, we just duplicate this
* code in both drivers using a simple symbol renaming scheme that hides this
* hack from the drivers.
*/
#define AIC_LIB_ENTRY_CONCAT(x, prefix) prefix ## x
#define AIC_LIB_ENTRY_EXPAND(x, prefix) AIC_LIB_ENTRY_CONCAT(x, prefix)
#define AIC_LIB_ENTRY(x) AIC_LIB_ENTRY_EXPAND(x, AIC_LIB_PREFIX)
#define aic_sense_desc AIC_LIB_ENTRY(_sense_desc)
#define aic_sense_error_action AIC_LIB_ENTRY(_sense_error_action)
#define aic_error_action AIC_LIB_ENTRY(_error_action)
#define aic_op_desc AIC_LIB_ENTRY(_op_desc)
#define aic_cdb_string AIC_LIB_ENTRY(_cdb_string)
#define aic_print_inquiry AIC_LIB_ENTRY(_print_inquiry)
#define aic_calc_syncsrate AIC_LIB_ENTRY(_calc_syncrate)
#define aic_calc_syncparam AIC_LIB_ENTRY(_calc_syncparam)
#define aic_calc_speed AIC_LIB_ENTRY(_calc_speed)
#define aic_inquiry_match AIC_LIB_ENTRY(_inquiry_match)
#define aic_static_inquiry_match AIC_LIB_ENTRY(_static_inquiry_match)
#define aic_parse_brace_option AIC_LIB_ENTRY(_parse_brace_option)
/******************************************************************************/
void aic_sense_desc(int /*sense_key*/, int /*asc*/,
int /*ascq*/, struct scsi_inquiry_data*,
const char** /*sense_key_desc*/,
const char** /*asc_desc*/);
aic_sense_action aic_sense_error_action(struct scsi_sense_data*,
struct scsi_inquiry_data*,
uint32_t /*sense_flags*/);
uint32_t aic_error_action(struct scsi_cmnd *,
struct scsi_inquiry_data *,
cam_status, u_int);
#define SF_RETRY_UA 0x01
#define SF_NO_PRINT 0x02
#define SF_QUIET_IR 0x04 /* Be quiet about Illegal Request reponses */
#define SF_PRINT_ALWAYS 0x08
const char * aic_op_desc(uint16_t /*opcode*/, struct scsi_inquiry_data*);
char * aic_cdb_string(uint8_t* /*cdb_ptr*/, char* /*cdb_string*/,
size_t /*len*/);
void aic_print_inquiry(struct scsi_inquiry_data*);
u_int aic_calc_syncsrate(u_int /*period_factor*/);
u_int aic_calc_syncparam(u_int /*period*/);
u_int aic_calc_speed(u_int width, u_int period, u_int offset,
u_int min_rate);
int aic_inquiry_match(caddr_t /*inqbuffer*/,
caddr_t /*table_entry*/);
int aic_static_inquiry_match(caddr_t /*inqbuffer*/,
caddr_t /*table_entry*/);
typedef void aic_option_callback_t(u_long, int, int, int32_t);
char * aic_parse_brace_option(char *opt_name, char *opt_arg,
char *end, int depth,
aic_option_callback_t *, u_long);
static __inline void scsi_extract_sense(struct scsi_sense_data *sense,
int *error_code, int *sense_key,
int *asc, int *ascq);
static __inline void scsi_ulto2b(uint32_t val, uint8_t *bytes);
static __inline void scsi_ulto3b(uint32_t val, uint8_t *bytes);
static __inline void scsi_ulto4b(uint32_t val, uint8_t *bytes);
static __inline uint32_t scsi_2btoul(uint8_t *bytes);
static __inline uint32_t scsi_3btoul(uint8_t *bytes);
static __inline int32_t scsi_3btol(uint8_t *bytes);
static __inline uint32_t scsi_4btoul(uint8_t *bytes);
static __inline void scsi_extract_sense(struct scsi_sense_data *sense,
int *error_code, int *sense_key,
int *asc, int *ascq)
{
*error_code = sense->error_code & SSD_ERRCODE;
*sense_key = sense->flags & SSD_KEY;
*asc = (sense->extra_len >= 5) ? sense->add_sense_code : 0;
*ascq = (sense->extra_len >= 6) ? sense->add_sense_code_qual : 0;
}
static __inline void
scsi_ulto2b(uint32_t val, uint8_t *bytes)
{
bytes[0] = (val >> 8) & 0xff;
bytes[1] = val & 0xff;
}
static __inline void
scsi_ulto3b(uint32_t val, uint8_t *bytes)
{
bytes[0] = (val >> 16) & 0xff;
bytes[1] = (val >> 8) & 0xff;
bytes[2] = val & 0xff;
}
static __inline void
scsi_ulto4b(uint32_t val, uint8_t *bytes)
{
bytes[0] = (val >> 24) & 0xff;
bytes[1] = (val >> 16) & 0xff;
bytes[2] = (val >> 8) & 0xff;
bytes[3] = val & 0xff;
}
static __inline uint32_t
scsi_2btoul(uint8_t *bytes)
{
uint32_t rv;
rv = (bytes[0] << 8) |
bytes[1];
return (rv);
}
static __inline uint32_t
scsi_3btoul(uint8_t *bytes)
{
uint32_t rv;
rv = (bytes[0] << 16) |
(bytes[1] << 8) |
bytes[2];
return (rv);
}
static __inline int32_t
scsi_3btol(uint8_t *bytes)
{
uint32_t rc = scsi_3btoul(bytes);
if (rc & 0x00800000)
rc |= 0xff000000;
return (int32_t) rc;
}
static __inline uint32_t
scsi_4btoul(uint8_t *bytes)
{
uint32_t rv;
rv = (bytes[0] << 24) |
(bytes[1] << 16) |
(bytes[2] << 8) |
bytes[3];
return (rv);
}
/* Macros for generating the elements of the PCI ID tables. */
#define GETID(v, s) (unsigned)(((v) >> (s)) & 0xFFFF ?: PCI_ANY_ID)
#define ID_C(x, c) \
{ \
GETID(x,32), GETID(x,48), GETID(x,0), GETID(x,16), \
(c) << 8, 0xFFFF00, 0 \
}
#define ID2C(x) \
ID_C(x, PCI_CLASS_STORAGE_SCSI), \
ID_C(x, PCI_CLASS_STORAGE_RAID)
#define IDIROC(x) ((x) | ~ID_ALL_IROC_MASK)
/* Generate IDs for all 16 possibilites.
* The argument has already masked out
* the 4 least significant bits of the device id.
* (e.g., mask: ID_9005_GENERIC_MASK).
*/
#define ID16(x) \
ID(x), \
ID((x) | 0x0001000000000000ull), \
ID((x) | 0x0002000000000000ull), \
ID((x) | 0x0003000000000000ull), \
ID((x) | 0x0004000000000000ull), \
ID((x) | 0x0005000000000000ull), \
ID((x) | 0x0006000000000000ull), \
ID((x) | 0x0007000000000000ull), \
ID((x) | 0x0008000000000000ull), \
ID((x) | 0x0009000000000000ull), \
ID((x) | 0x000A000000000000ull), \
ID((x) | 0x000B000000000000ull), \
ID((x) | 0x000C000000000000ull), \
ID((x) | 0x000D000000000000ull), \
ID((x) | 0x000E000000000000ull), \
ID((x) | 0x000F000000000000ull)
#endif /*_AICLIB_H */
Reference in New Issue View Git Blame Copy Permalink