556 lines
13 KiB
C
556 lines
13 KiB
C
/*
|
|
* CoreChip-sz SR9700 one chip USB 1.1 Ethernet Devices
|
|
*
|
|
* Author : Liu Junliang <liujunliang_ljl@163.com>
|
|
*
|
|
* Based on dm9601.c
|
|
*
|
|
* This file is licensed under the terms of the GNU General Public License
|
|
* version 2. This program is licensed "as is" without any warranty of any
|
|
* kind, whether express or implied.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/stddef.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/ethtool.h>
|
|
#include <linux/mii.h>
|
|
#include <linux/usb.h>
|
|
#include <linux/crc32.h>
|
|
#include <linux/usb/usbnet.h>
|
|
|
|
#include "sr9700.h"
|
|
|
|
static int sr_read(struct usbnet *dev, u8 reg, u16 length, void *data)
|
|
{
|
|
int err;
|
|
|
|
err = usbnet_read_cmd(dev, SR_RD_REGS, SR_REQ_RD_REG, 0, reg, data,
|
|
length);
|
|
if ((err != length) && (err >= 0))
|
|
err = -EINVAL;
|
|
return err;
|
|
}
|
|
|
|
static int sr_write(struct usbnet *dev, u8 reg, u16 length, void *data)
|
|
{
|
|
int err;
|
|
|
|
err = usbnet_write_cmd(dev, SR_WR_REGS, SR_REQ_WR_REG, 0, reg, data,
|
|
length);
|
|
if ((err >= 0) && (err < length))
|
|
err = -EINVAL;
|
|
return err;
|
|
}
|
|
|
|
static int sr_read_reg(struct usbnet *dev, u8 reg, u8 *value)
|
|
{
|
|
return sr_read(dev, reg, 1, value);
|
|
}
|
|
|
|
static int sr_write_reg(struct usbnet *dev, u8 reg, u8 value)
|
|
{
|
|
return usbnet_write_cmd(dev, SR_WR_REGS, SR_REQ_WR_REG,
|
|
value, reg, NULL, 0);
|
|
}
|
|
|
|
static void sr_write_async(struct usbnet *dev, u8 reg, u16 length, void *data)
|
|
{
|
|
usbnet_write_cmd_async(dev, SR_WR_REGS, SR_REQ_WR_REG,
|
|
0, reg, data, length);
|
|
}
|
|
|
|
static void sr_write_reg_async(struct usbnet *dev, u8 reg, u8 value)
|
|
{
|
|
usbnet_write_cmd_async(dev, SR_WR_REGS, SR_REQ_WR_REG,
|
|
value, reg, NULL, 0);
|
|
}
|
|
|
|
static int wait_phy_eeprom_ready(struct usbnet *dev, int phy)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < SR_SHARE_TIMEOUT; i++) {
|
|
u8 tmp = 0;
|
|
int ret;
|
|
|
|
udelay(1);
|
|
ret = sr_read_reg(dev, SR_EPCR, &tmp);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* ready */
|
|
if (!(tmp & EPCR_ERRE))
|
|
return 0;
|
|
}
|
|
|
|
netdev_err(dev->net, "%s write timed out!\n", phy ? "phy" : "eeprom");
|
|
|
|
return -EIO;
|
|
}
|
|
|
|
static int sr_share_read_word(struct usbnet *dev, int phy, u8 reg,
|
|
__le16 *value)
|
|
{
|
|
int ret;
|
|
|
|
mutex_lock(&dev->phy_mutex);
|
|
|
|
sr_write_reg(dev, SR_EPAR, phy ? (reg | EPAR_PHY_ADR) : reg);
|
|
sr_write_reg(dev, SR_EPCR, phy ? (EPCR_EPOS | EPCR_ERPRR) : EPCR_ERPRR);
|
|
|
|
ret = wait_phy_eeprom_ready(dev, phy);
|
|
if (ret < 0)
|
|
goto out_unlock;
|
|
|
|
sr_write_reg(dev, SR_EPCR, 0x0);
|
|
ret = sr_read(dev, SR_EPDR, 2, value);
|
|
|
|
netdev_dbg(dev->net, "read shared %d 0x%02x returned 0x%04x, %d\n",
|
|
phy, reg, *value, ret);
|
|
|
|
out_unlock:
|
|
mutex_unlock(&dev->phy_mutex);
|
|
return ret;
|
|
}
|
|
|
|
static int sr_share_write_word(struct usbnet *dev, int phy, u8 reg,
|
|
__le16 value)
|
|
{
|
|
int ret;
|
|
|
|
mutex_lock(&dev->phy_mutex);
|
|
|
|
ret = sr_write(dev, SR_EPDR, 2, &value);
|
|
if (ret < 0)
|
|
goto out_unlock;
|
|
|
|
sr_write_reg(dev, SR_EPAR, phy ? (reg | EPAR_PHY_ADR) : reg);
|
|
sr_write_reg(dev, SR_EPCR, phy ? (EPCR_WEP | EPCR_EPOS | EPCR_ERPRW) :
|
|
(EPCR_WEP | EPCR_ERPRW));
|
|
|
|
ret = wait_phy_eeprom_ready(dev, phy);
|
|
if (ret < 0)
|
|
goto out_unlock;
|
|
|
|
sr_write_reg(dev, SR_EPCR, 0x0);
|
|
|
|
out_unlock:
|
|
mutex_unlock(&dev->phy_mutex);
|
|
return ret;
|
|
}
|
|
|
|
static int sr_read_eeprom_word(struct usbnet *dev, u8 offset, void *value)
|
|
{
|
|
return sr_share_read_word(dev, 0, offset, value);
|
|
}
|
|
|
|
static int sr9700_get_eeprom_len(struct net_device *netdev)
|
|
{
|
|
return SR_EEPROM_LEN;
|
|
}
|
|
|
|
static int sr9700_get_eeprom(struct net_device *netdev,
|
|
struct ethtool_eeprom *eeprom, u8 *data)
|
|
{
|
|
struct usbnet *dev = netdev_priv(netdev);
|
|
__le16 *buf = (__le16 *)data;
|
|
int ret = 0;
|
|
int i;
|
|
|
|
/* access is 16bit */
|
|
if ((eeprom->offset & 0x01) || (eeprom->len & 0x01))
|
|
return -EINVAL;
|
|
|
|
for (i = 0; i < eeprom->len / 2; i++) {
|
|
ret = sr_read_eeprom_word(dev, eeprom->offset / 2 + i, buf + i);
|
|
if (ret < 0)
|
|
break;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int sr_mdio_read(struct net_device *netdev, int phy_id, int loc)
|
|
{
|
|
struct usbnet *dev = netdev_priv(netdev);
|
|
__le16 res;
|
|
int rc = 0;
|
|
|
|
if (phy_id) {
|
|
netdev_dbg(netdev, "Only internal phy supported\n");
|
|
return 0;
|
|
}
|
|
|
|
/* Access NSR_LINKST bit for link status instead of MII_BMSR */
|
|
if (loc == MII_BMSR) {
|
|
u8 value;
|
|
|
|
sr_read_reg(dev, SR_NSR, &value);
|
|
if (value & NSR_LINKST)
|
|
rc = 1;
|
|
}
|
|
sr_share_read_word(dev, 1, loc, &res);
|
|
if (rc == 1)
|
|
res = le16_to_cpu(res) | BMSR_LSTATUS;
|
|
else
|
|
res = le16_to_cpu(res) & ~BMSR_LSTATUS;
|
|
|
|
netdev_dbg(netdev, "sr_mdio_read() phy_id=0x%02x, loc=0x%02x, returns=0x%04x\n",
|
|
phy_id, loc, res);
|
|
|
|
return res;
|
|
}
|
|
|
|
static void sr_mdio_write(struct net_device *netdev, int phy_id, int loc,
|
|
int val)
|
|
{
|
|
struct usbnet *dev = netdev_priv(netdev);
|
|
__le16 res = cpu_to_le16(val);
|
|
|
|
if (phy_id) {
|
|
netdev_dbg(netdev, "Only internal phy supported\n");
|
|
return;
|
|
}
|
|
|
|
netdev_dbg(netdev, "sr_mdio_write() phy_id=0x%02x, loc=0x%02x, val=0x%04x\n",
|
|
phy_id, loc, val);
|
|
|
|
sr_share_write_word(dev, 1, loc, res);
|
|
}
|
|
|
|
static u32 sr9700_get_link(struct net_device *netdev)
|
|
{
|
|
struct usbnet *dev = netdev_priv(netdev);
|
|
u8 value = 0;
|
|
int rc = 0;
|
|
|
|
/* Get the Link Status directly */
|
|
sr_read_reg(dev, SR_NSR, &value);
|
|
if (value & NSR_LINKST)
|
|
rc = 1;
|
|
|
|
return rc;
|
|
}
|
|
|
|
static int sr9700_ioctl(struct net_device *netdev, struct ifreq *rq, int cmd)
|
|
{
|
|
struct usbnet *dev = netdev_priv(netdev);
|
|
|
|
return generic_mii_ioctl(&dev->mii, if_mii(rq), cmd, NULL);
|
|
}
|
|
|
|
static const struct ethtool_ops sr9700_ethtool_ops = {
|
|
.get_drvinfo = usbnet_get_drvinfo,
|
|
.get_link = sr9700_get_link,
|
|
.get_msglevel = usbnet_get_msglevel,
|
|
.set_msglevel = usbnet_set_msglevel,
|
|
.get_eeprom_len = sr9700_get_eeprom_len,
|
|
.get_eeprom = sr9700_get_eeprom,
|
|
.nway_reset = usbnet_nway_reset,
|
|
.get_link_ksettings = usbnet_get_link_ksettings,
|
|
.set_link_ksettings = usbnet_set_link_ksettings,
|
|
};
|
|
|
|
static void sr9700_set_multicast(struct net_device *netdev)
|
|
{
|
|
struct usbnet *dev = netdev_priv(netdev);
|
|
/* We use the 20 byte dev->data for our 8 byte filter buffer
|
|
* to avoid allocating memory that is tricky to free later
|
|
*/
|
|
u8 *hashes = (u8 *)&dev->data;
|
|
/* rx_ctl setting : enable, disable_long, disable_crc */
|
|
u8 rx_ctl = RCR_RXEN | RCR_DIS_CRC | RCR_DIS_LONG;
|
|
|
|
memset(hashes, 0x00, SR_MCAST_SIZE);
|
|
/* broadcast address */
|
|
hashes[SR_MCAST_SIZE - 1] |= SR_MCAST_ADDR_FLAG;
|
|
if (netdev->flags & IFF_PROMISC) {
|
|
rx_ctl |= RCR_PRMSC;
|
|
} else if (netdev->flags & IFF_ALLMULTI ||
|
|
netdev_mc_count(netdev) > SR_MCAST_MAX) {
|
|
rx_ctl |= RCR_RUNT;
|
|
} else if (!netdev_mc_empty(netdev)) {
|
|
struct netdev_hw_addr *ha;
|
|
|
|
netdev_for_each_mc_addr(ha, netdev) {
|
|
u32 crc = ether_crc(ETH_ALEN, ha->addr) >> 26;
|
|
hashes[crc >> 3] |= 1 << (crc & 0x7);
|
|
}
|
|
}
|
|
|
|
sr_write_async(dev, SR_MAR, SR_MCAST_SIZE, hashes);
|
|
sr_write_reg_async(dev, SR_RCR, rx_ctl);
|
|
}
|
|
|
|
static int sr9700_set_mac_address(struct net_device *netdev, void *p)
|
|
{
|
|
struct usbnet *dev = netdev_priv(netdev);
|
|
struct sockaddr *addr = p;
|
|
|
|
if (!is_valid_ether_addr(addr->sa_data)) {
|
|
netdev_err(netdev, "not setting invalid mac address %pM\n",
|
|
addr->sa_data);
|
|
return -EINVAL;
|
|
}
|
|
|
|
memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
|
|
sr_write_async(dev, SR_PAR, 6, netdev->dev_addr);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct net_device_ops sr9700_netdev_ops = {
|
|
.ndo_open = usbnet_open,
|
|
.ndo_stop = usbnet_stop,
|
|
.ndo_start_xmit = usbnet_start_xmit,
|
|
.ndo_tx_timeout = usbnet_tx_timeout,
|
|
.ndo_change_mtu = usbnet_change_mtu,
|
|
.ndo_get_stats64 = usbnet_get_stats64,
|
|
.ndo_validate_addr = eth_validate_addr,
|
|
.ndo_do_ioctl = sr9700_ioctl,
|
|
.ndo_set_rx_mode = sr9700_set_multicast,
|
|
.ndo_set_mac_address = sr9700_set_mac_address,
|
|
};
|
|
|
|
static int sr9700_bind(struct usbnet *dev, struct usb_interface *intf)
|
|
{
|
|
struct net_device *netdev;
|
|
struct mii_if_info *mii;
|
|
int ret;
|
|
|
|
ret = usbnet_get_endpoints(dev, intf);
|
|
if (ret)
|
|
goto out;
|
|
|
|
netdev = dev->net;
|
|
|
|
netdev->netdev_ops = &sr9700_netdev_ops;
|
|
netdev->ethtool_ops = &sr9700_ethtool_ops;
|
|
netdev->hard_header_len += SR_TX_OVERHEAD;
|
|
dev->hard_mtu = netdev->mtu + netdev->hard_header_len;
|
|
/* bulkin buffer is preferably not less than 3K */
|
|
dev->rx_urb_size = 3072;
|
|
|
|
mii = &dev->mii;
|
|
mii->dev = netdev;
|
|
mii->mdio_read = sr_mdio_read;
|
|
mii->mdio_write = sr_mdio_write;
|
|
mii->phy_id_mask = 0x1f;
|
|
mii->reg_num_mask = 0x1f;
|
|
|
|
sr_write_reg(dev, SR_NCR, NCR_RST);
|
|
udelay(20);
|
|
|
|
/* read MAC
|
|
* After Chip Power on, the Chip will reload the MAC from
|
|
* EEPROM automatically to PAR. In case there is no EEPROM externally,
|
|
* a default MAC address is stored in PAR for making chip work properly.
|
|
*/
|
|
if (sr_read(dev, SR_PAR, ETH_ALEN, netdev->dev_addr) < 0) {
|
|
netdev_err(netdev, "Error reading MAC address\n");
|
|
ret = -ENODEV;
|
|
goto out;
|
|
}
|
|
|
|
/* power up and reset phy */
|
|
sr_write_reg(dev, SR_PRR, PRR_PHY_RST);
|
|
/* at least 10ms, here 20ms for safe */
|
|
mdelay(20);
|
|
sr_write_reg(dev, SR_PRR, 0);
|
|
/* at least 1ms, here 2ms for reading right register */
|
|
udelay(2 * 1000);
|
|
|
|
/* receive broadcast packets */
|
|
sr9700_set_multicast(netdev);
|
|
|
|
sr_mdio_write(netdev, mii->phy_id, MII_BMCR, BMCR_RESET);
|
|
sr_mdio_write(netdev, mii->phy_id, MII_ADVERTISE, ADVERTISE_ALL |
|
|
ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP);
|
|
mii_nway_restart(mii);
|
|
|
|
out:
|
|
return ret;
|
|
}
|
|
|
|
static int sr9700_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
|
|
{
|
|
struct sk_buff *sr_skb;
|
|
int len;
|
|
|
|
/* skb content (packets) format :
|
|
* p0 p1 p2 ...... pm
|
|
* / \
|
|
* / \
|
|
* / \
|
|
* / \
|
|
* p0b0 p0b1 p0b2 p0b3 ...... p0b(n-4) p0b(n-3)...p0bn
|
|
*
|
|
* p0 : packet 0
|
|
* p0b0 : packet 0 byte 0
|
|
*
|
|
* b0: rx status
|
|
* b1: packet length (incl crc) low
|
|
* b2: packet length (incl crc) high
|
|
* b3..n-4: packet data
|
|
* bn-3..bn: ethernet packet crc
|
|
*/
|
|
if (unlikely(skb->len < SR_RX_OVERHEAD)) {
|
|
netdev_err(dev->net, "unexpected tiny rx frame\n");
|
|
return 0;
|
|
}
|
|
|
|
/* one skb may contains multiple packets */
|
|
while (skb->len > SR_RX_OVERHEAD) {
|
|
if (skb->data[0] != 0x40)
|
|
return 0;
|
|
|
|
/* ignore the CRC length */
|
|
len = (skb->data[1] | (skb->data[2] << 8)) - 4;
|
|
|
|
if (len > ETH_FRAME_LEN)
|
|
return 0;
|
|
|
|
/* the last packet of current skb */
|
|
if (skb->len == (len + SR_RX_OVERHEAD)) {
|
|
skb_pull(skb, 3);
|
|
skb->len = len;
|
|
skb_set_tail_pointer(skb, len);
|
|
skb->truesize = len + sizeof(struct sk_buff);
|
|
return 2;
|
|
}
|
|
|
|
/* skb_clone is used for address align */
|
|
sr_skb = skb_clone(skb, GFP_ATOMIC);
|
|
if (!sr_skb)
|
|
return 0;
|
|
|
|
sr_skb->len = len;
|
|
sr_skb->data = skb->data + 3;
|
|
skb_set_tail_pointer(sr_skb, len);
|
|
sr_skb->truesize = len + sizeof(struct sk_buff);
|
|
usbnet_skb_return(dev, sr_skb);
|
|
|
|
skb_pull(skb, len + SR_RX_OVERHEAD);
|
|
};
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct sk_buff *sr9700_tx_fixup(struct usbnet *dev, struct sk_buff *skb,
|
|
gfp_t flags)
|
|
{
|
|
int len;
|
|
|
|
/* SR9700 can only send out one ethernet packet at once.
|
|
*
|
|
* b0 b1 b2 b3 ...... b(n-4) b(n-3)...bn
|
|
*
|
|
* b0: rx status
|
|
* b1: packet length (incl crc) low
|
|
* b2: packet length (incl crc) high
|
|
* b3..n-4: packet data
|
|
* bn-3..bn: ethernet packet crc
|
|
*/
|
|
|
|
len = skb->len;
|
|
|
|
if (skb_cow_head(skb, SR_TX_OVERHEAD)) {
|
|
dev_kfree_skb_any(skb);
|
|
return NULL;
|
|
}
|
|
|
|
__skb_push(skb, SR_TX_OVERHEAD);
|
|
|
|
/* usbnet adds padding if length is a multiple of packet size
|
|
* if so, adjust length value in header
|
|
*/
|
|
if ((skb->len % dev->maxpacket) == 0)
|
|
len++;
|
|
|
|
skb->data[0] = len;
|
|
skb->data[1] = len >> 8;
|
|
|
|
return skb;
|
|
}
|
|
|
|
static void sr9700_status(struct usbnet *dev, struct urb *urb)
|
|
{
|
|
int link;
|
|
u8 *buf;
|
|
|
|
/* format:
|
|
b0: net status
|
|
b1: tx status 1
|
|
b2: tx status 2
|
|
b3: rx status
|
|
b4: rx overflow
|
|
b5: rx count
|
|
b6: tx count
|
|
b7: gpr
|
|
*/
|
|
|
|
if (urb->actual_length < 8)
|
|
return;
|
|
|
|
buf = urb->transfer_buffer;
|
|
|
|
link = !!(buf[0] & 0x40);
|
|
if (netif_carrier_ok(dev->net) != link) {
|
|
usbnet_link_change(dev, link, 1);
|
|
netdev_dbg(dev->net, "Link Status is: %d\n", link);
|
|
}
|
|
}
|
|
|
|
static int sr9700_link_reset(struct usbnet *dev)
|
|
{
|
|
struct ethtool_cmd ecmd;
|
|
|
|
mii_check_media(&dev->mii, 1, 1);
|
|
mii_ethtool_gset(&dev->mii, &ecmd);
|
|
|
|
netdev_dbg(dev->net, "link_reset() speed: %d duplex: %d\n",
|
|
ecmd.speed, ecmd.duplex);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct driver_info sr9700_driver_info = {
|
|
.description = "CoreChip SR9700 USB Ethernet",
|
|
.flags = FLAG_ETHER,
|
|
.bind = sr9700_bind,
|
|
.rx_fixup = sr9700_rx_fixup,
|
|
.tx_fixup = sr9700_tx_fixup,
|
|
.status = sr9700_status,
|
|
.link_reset = sr9700_link_reset,
|
|
.reset = sr9700_link_reset,
|
|
};
|
|
|
|
static const struct usb_device_id products[] = {
|
|
{
|
|
USB_DEVICE(0x0fe6, 0x9700), /* SR9700 device */
|
|
.driver_info = (unsigned long)&sr9700_driver_info,
|
|
},
|
|
{}, /* END */
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(usb, products);
|
|
|
|
static struct usb_driver sr9700_usb_driver = {
|
|
.name = "sr9700",
|
|
.id_table = products,
|
|
.probe = usbnet_probe,
|
|
.disconnect = usbnet_disconnect,
|
|
.suspend = usbnet_suspend,
|
|
.resume = usbnet_resume,
|
|
.disable_hub_initiated_lpm = 1,
|
|
};
|
|
|
|
module_usb_driver(sr9700_usb_driver);
|
|
|
|
MODULE_AUTHOR("liujl <liujunliang_ljl@163.com>");
|
|
MODULE_DESCRIPTION("SR9700 one chip USB 1.1 USB to Ethernet device from http://www.corechip-sz.com/");
|
|
MODULE_LICENSE("GPL");
|