884 lines
20 KiB
C
884 lines
20 KiB
C
/*
|
|
* mxl5007t.c - driver for the MaxLinear MxL5007T silicon tuner
|
|
*
|
|
* Copyright (C) 2008, 2009 Michael Krufky <mkrufky@linuxtv.org>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*/
|
|
|
|
#include <linux/i2c.h>
|
|
#include <linux/types.h>
|
|
#include <linux/videodev2.h>
|
|
#include "tuner-i2c.h"
|
|
#include "mxl5007t.h"
|
|
|
|
static DEFINE_MUTEX(mxl5007t_list_mutex);
|
|
static LIST_HEAD(hybrid_tuner_instance_list);
|
|
|
|
static int mxl5007t_debug;
|
|
module_param_named(debug, mxl5007t_debug, int, 0644);
|
|
MODULE_PARM_DESC(debug, "set debug level");
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
#define mxl_printk(kern, fmt, arg...) \
|
|
printk(kern "%s: " fmt "\n", __func__, ##arg)
|
|
|
|
#define mxl_err(fmt, arg...) \
|
|
mxl_printk(KERN_ERR, "%d: " fmt, __LINE__, ##arg)
|
|
|
|
#define mxl_warn(fmt, arg...) \
|
|
mxl_printk(KERN_WARNING, fmt, ##arg)
|
|
|
|
#define mxl_info(fmt, arg...) \
|
|
mxl_printk(KERN_INFO, fmt, ##arg)
|
|
|
|
#define mxl_debug(fmt, arg...) \
|
|
({ \
|
|
if (mxl5007t_debug) \
|
|
mxl_printk(KERN_DEBUG, fmt, ##arg); \
|
|
})
|
|
|
|
#define mxl_fail(ret) \
|
|
({ \
|
|
int __ret; \
|
|
__ret = (ret < 0); \
|
|
if (__ret) \
|
|
mxl_printk(KERN_ERR, "error %d on line %d", \
|
|
ret, __LINE__); \
|
|
__ret; \
|
|
})
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
#define MHz 1000000
|
|
|
|
enum mxl5007t_mode {
|
|
MxL_MODE_ISDBT = 0,
|
|
MxL_MODE_DVBT = 1,
|
|
MxL_MODE_ATSC = 2,
|
|
MxL_MODE_CABLE = 0x10,
|
|
};
|
|
|
|
enum mxl5007t_chip_version {
|
|
MxL_UNKNOWN_ID = 0x00,
|
|
MxL_5007_V1_F1 = 0x11,
|
|
MxL_5007_V1_F2 = 0x12,
|
|
MxL_5007_V4 = 0x14,
|
|
MxL_5007_V2_100_F1 = 0x21,
|
|
MxL_5007_V2_100_F2 = 0x22,
|
|
MxL_5007_V2_200_F1 = 0x23,
|
|
MxL_5007_V2_200_F2 = 0x24,
|
|
};
|
|
|
|
struct reg_pair_t {
|
|
u8 reg;
|
|
u8 val;
|
|
};
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
static struct reg_pair_t init_tab[] = {
|
|
{ 0x02, 0x06 },
|
|
{ 0x03, 0x48 },
|
|
{ 0x05, 0x04 },
|
|
{ 0x06, 0x10 },
|
|
{ 0x2e, 0x15 }, /* OVERRIDE */
|
|
{ 0x30, 0x10 }, /* OVERRIDE */
|
|
{ 0x45, 0x58 }, /* OVERRIDE */
|
|
{ 0x48, 0x19 }, /* OVERRIDE */
|
|
{ 0x52, 0x03 }, /* OVERRIDE */
|
|
{ 0x53, 0x44 }, /* OVERRIDE */
|
|
{ 0x6a, 0x4b }, /* OVERRIDE */
|
|
{ 0x76, 0x00 }, /* OVERRIDE */
|
|
{ 0x78, 0x18 }, /* OVERRIDE */
|
|
{ 0x7a, 0x17 }, /* OVERRIDE */
|
|
{ 0x85, 0x06 }, /* OVERRIDE */
|
|
{ 0x01, 0x01 }, /* TOP_MASTER_ENABLE */
|
|
{ 0, 0 }
|
|
};
|
|
|
|
static struct reg_pair_t init_tab_cable[] = {
|
|
{ 0x02, 0x06 },
|
|
{ 0x03, 0x48 },
|
|
{ 0x05, 0x04 },
|
|
{ 0x06, 0x10 },
|
|
{ 0x09, 0x3f },
|
|
{ 0x0a, 0x3f },
|
|
{ 0x0b, 0x3f },
|
|
{ 0x2e, 0x15 }, /* OVERRIDE */
|
|
{ 0x30, 0x10 }, /* OVERRIDE */
|
|
{ 0x45, 0x58 }, /* OVERRIDE */
|
|
{ 0x48, 0x19 }, /* OVERRIDE */
|
|
{ 0x52, 0x03 }, /* OVERRIDE */
|
|
{ 0x53, 0x44 }, /* OVERRIDE */
|
|
{ 0x6a, 0x4b }, /* OVERRIDE */
|
|
{ 0x76, 0x00 }, /* OVERRIDE */
|
|
{ 0x78, 0x18 }, /* OVERRIDE */
|
|
{ 0x7a, 0x17 }, /* OVERRIDE */
|
|
{ 0x85, 0x06 }, /* OVERRIDE */
|
|
{ 0x01, 0x01 }, /* TOP_MASTER_ENABLE */
|
|
{ 0, 0 }
|
|
};
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
static struct reg_pair_t reg_pair_rftune[] = {
|
|
{ 0x0f, 0x00 }, /* abort tune */
|
|
{ 0x0c, 0x15 },
|
|
{ 0x0d, 0x40 },
|
|
{ 0x0e, 0x0e },
|
|
{ 0x1f, 0x87 }, /* OVERRIDE */
|
|
{ 0x20, 0x1f }, /* OVERRIDE */
|
|
{ 0x21, 0x87 }, /* OVERRIDE */
|
|
{ 0x22, 0x1f }, /* OVERRIDE */
|
|
{ 0x80, 0x01 }, /* freq dependent */
|
|
{ 0x0f, 0x01 }, /* start tune */
|
|
{ 0, 0 }
|
|
};
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
struct mxl5007t_state {
|
|
struct list_head hybrid_tuner_instance_list;
|
|
struct tuner_i2c_props i2c_props;
|
|
|
|
struct mutex lock;
|
|
|
|
struct mxl5007t_config *config;
|
|
|
|
enum mxl5007t_chip_version chip_id;
|
|
|
|
struct reg_pair_t tab_init[ARRAY_SIZE(init_tab)];
|
|
struct reg_pair_t tab_init_cable[ARRAY_SIZE(init_tab_cable)];
|
|
struct reg_pair_t tab_rftune[ARRAY_SIZE(reg_pair_rftune)];
|
|
|
|
u32 frequency;
|
|
u32 bandwidth;
|
|
};
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
/* called by _init and _rftun to manipulate the register arrays */
|
|
|
|
static void set_reg_bits(struct reg_pair_t *reg_pair, u8 reg, u8 mask, u8 val)
|
|
{
|
|
unsigned int i = 0;
|
|
|
|
while (reg_pair[i].reg || reg_pair[i].val) {
|
|
if (reg_pair[i].reg == reg) {
|
|
reg_pair[i].val &= ~mask;
|
|
reg_pair[i].val |= val;
|
|
}
|
|
i++;
|
|
|
|
}
|
|
return;
|
|
}
|
|
|
|
static void copy_reg_bits(struct reg_pair_t *reg_pair1,
|
|
struct reg_pair_t *reg_pair2)
|
|
{
|
|
unsigned int i, j;
|
|
|
|
i = j = 0;
|
|
|
|
while (reg_pair1[i].reg || reg_pair1[i].val) {
|
|
while (reg_pair2[j].reg || reg_pair2[j].reg) {
|
|
if (reg_pair1[i].reg != reg_pair2[j].reg) {
|
|
j++;
|
|
continue;
|
|
}
|
|
reg_pair2[j].val = reg_pair1[i].val;
|
|
break;
|
|
}
|
|
i++;
|
|
}
|
|
return;
|
|
}
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
static void mxl5007t_set_mode_bits(struct mxl5007t_state *state,
|
|
enum mxl5007t_mode mode,
|
|
s32 if_diff_out_level)
|
|
{
|
|
switch (mode) {
|
|
case MxL_MODE_ATSC:
|
|
set_reg_bits(state->tab_init, 0x06, 0x1f, 0x12);
|
|
break;
|
|
case MxL_MODE_DVBT:
|
|
set_reg_bits(state->tab_init, 0x06, 0x1f, 0x11);
|
|
break;
|
|
case MxL_MODE_ISDBT:
|
|
set_reg_bits(state->tab_init, 0x06, 0x1f, 0x10);
|
|
break;
|
|
case MxL_MODE_CABLE:
|
|
set_reg_bits(state->tab_init_cable, 0x09, 0xff, 0xc1);
|
|
set_reg_bits(state->tab_init_cable, 0x0a, 0xff,
|
|
8 - if_diff_out_level);
|
|
set_reg_bits(state->tab_init_cable, 0x0b, 0xff, 0x17);
|
|
break;
|
|
default:
|
|
mxl_fail(-EINVAL);
|
|
}
|
|
return;
|
|
}
|
|
|
|
static void mxl5007t_set_if_freq_bits(struct mxl5007t_state *state,
|
|
enum mxl5007t_if_freq if_freq,
|
|
int invert_if)
|
|
{
|
|
u8 val;
|
|
|
|
switch (if_freq) {
|
|
case MxL_IF_4_MHZ:
|
|
val = 0x00;
|
|
break;
|
|
case MxL_IF_4_5_MHZ:
|
|
val = 0x02;
|
|
break;
|
|
case MxL_IF_4_57_MHZ:
|
|
val = 0x03;
|
|
break;
|
|
case MxL_IF_5_MHZ:
|
|
val = 0x04;
|
|
break;
|
|
case MxL_IF_5_38_MHZ:
|
|
val = 0x05;
|
|
break;
|
|
case MxL_IF_6_MHZ:
|
|
val = 0x06;
|
|
break;
|
|
case MxL_IF_6_28_MHZ:
|
|
val = 0x07;
|
|
break;
|
|
case MxL_IF_9_1915_MHZ:
|
|
val = 0x08;
|
|
break;
|
|
case MxL_IF_35_25_MHZ:
|
|
val = 0x09;
|
|
break;
|
|
case MxL_IF_36_15_MHZ:
|
|
val = 0x0a;
|
|
break;
|
|
case MxL_IF_44_MHZ:
|
|
val = 0x0b;
|
|
break;
|
|
default:
|
|
mxl_fail(-EINVAL);
|
|
return;
|
|
}
|
|
set_reg_bits(state->tab_init, 0x02, 0x0f, val);
|
|
|
|
/* set inverted IF or normal IF */
|
|
set_reg_bits(state->tab_init, 0x02, 0x10, invert_if ? 0x10 : 0x00);
|
|
|
|
return;
|
|
}
|
|
|
|
static void mxl5007t_set_xtal_freq_bits(struct mxl5007t_state *state,
|
|
enum mxl5007t_xtal_freq xtal_freq)
|
|
{
|
|
switch (xtal_freq) {
|
|
case MxL_XTAL_16_MHZ:
|
|
/* select xtal freq & ref freq */
|
|
set_reg_bits(state->tab_init, 0x03, 0xf0, 0x00);
|
|
set_reg_bits(state->tab_init, 0x05, 0x0f, 0x00);
|
|
break;
|
|
case MxL_XTAL_20_MHZ:
|
|
set_reg_bits(state->tab_init, 0x03, 0xf0, 0x10);
|
|
set_reg_bits(state->tab_init, 0x05, 0x0f, 0x01);
|
|
break;
|
|
case MxL_XTAL_20_25_MHZ:
|
|
set_reg_bits(state->tab_init, 0x03, 0xf0, 0x20);
|
|
set_reg_bits(state->tab_init, 0x05, 0x0f, 0x02);
|
|
break;
|
|
case MxL_XTAL_20_48_MHZ:
|
|
set_reg_bits(state->tab_init, 0x03, 0xf0, 0x30);
|
|
set_reg_bits(state->tab_init, 0x05, 0x0f, 0x03);
|
|
break;
|
|
case MxL_XTAL_24_MHZ:
|
|
set_reg_bits(state->tab_init, 0x03, 0xf0, 0x40);
|
|
set_reg_bits(state->tab_init, 0x05, 0x0f, 0x04);
|
|
break;
|
|
case MxL_XTAL_25_MHZ:
|
|
set_reg_bits(state->tab_init, 0x03, 0xf0, 0x50);
|
|
set_reg_bits(state->tab_init, 0x05, 0x0f, 0x05);
|
|
break;
|
|
case MxL_XTAL_25_14_MHZ:
|
|
set_reg_bits(state->tab_init, 0x03, 0xf0, 0x60);
|
|
set_reg_bits(state->tab_init, 0x05, 0x0f, 0x06);
|
|
break;
|
|
case MxL_XTAL_27_MHZ:
|
|
set_reg_bits(state->tab_init, 0x03, 0xf0, 0x70);
|
|
set_reg_bits(state->tab_init, 0x05, 0x0f, 0x07);
|
|
break;
|
|
case MxL_XTAL_28_8_MHZ:
|
|
set_reg_bits(state->tab_init, 0x03, 0xf0, 0x80);
|
|
set_reg_bits(state->tab_init, 0x05, 0x0f, 0x08);
|
|
break;
|
|
case MxL_XTAL_32_MHZ:
|
|
set_reg_bits(state->tab_init, 0x03, 0xf0, 0x90);
|
|
set_reg_bits(state->tab_init, 0x05, 0x0f, 0x09);
|
|
break;
|
|
case MxL_XTAL_40_MHZ:
|
|
set_reg_bits(state->tab_init, 0x03, 0xf0, 0xa0);
|
|
set_reg_bits(state->tab_init, 0x05, 0x0f, 0x0a);
|
|
break;
|
|
case MxL_XTAL_44_MHZ:
|
|
set_reg_bits(state->tab_init, 0x03, 0xf0, 0xb0);
|
|
set_reg_bits(state->tab_init, 0x05, 0x0f, 0x0b);
|
|
break;
|
|
case MxL_XTAL_48_MHZ:
|
|
set_reg_bits(state->tab_init, 0x03, 0xf0, 0xc0);
|
|
set_reg_bits(state->tab_init, 0x05, 0x0f, 0x0c);
|
|
break;
|
|
case MxL_XTAL_49_3811_MHZ:
|
|
set_reg_bits(state->tab_init, 0x03, 0xf0, 0xd0);
|
|
set_reg_bits(state->tab_init, 0x05, 0x0f, 0x0d);
|
|
break;
|
|
default:
|
|
mxl_fail(-EINVAL);
|
|
return;
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
static struct reg_pair_t *mxl5007t_calc_init_regs(struct mxl5007t_state *state,
|
|
enum mxl5007t_mode mode)
|
|
{
|
|
struct mxl5007t_config *cfg = state->config;
|
|
|
|
memcpy(&state->tab_init, &init_tab, sizeof(init_tab));
|
|
memcpy(&state->tab_init_cable, &init_tab_cable, sizeof(init_tab_cable));
|
|
|
|
mxl5007t_set_mode_bits(state, mode, cfg->if_diff_out_level);
|
|
mxl5007t_set_if_freq_bits(state, cfg->if_freq_hz, cfg->invert_if);
|
|
mxl5007t_set_xtal_freq_bits(state, cfg->xtal_freq_hz);
|
|
|
|
set_reg_bits(state->tab_init, 0x04, 0x01, cfg->loop_thru_enable);
|
|
set_reg_bits(state->tab_init, 0x03, 0x08, cfg->clk_out_enable << 3);
|
|
set_reg_bits(state->tab_init, 0x03, 0x07, cfg->clk_out_amp);
|
|
|
|
if (mode >= MxL_MODE_CABLE) {
|
|
copy_reg_bits(state->tab_init, state->tab_init_cable);
|
|
return state->tab_init_cable;
|
|
} else
|
|
return state->tab_init;
|
|
}
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
enum mxl5007t_bw_mhz {
|
|
MxL_BW_6MHz = 6,
|
|
MxL_BW_7MHz = 7,
|
|
MxL_BW_8MHz = 8,
|
|
};
|
|
|
|
static void mxl5007t_set_bw_bits(struct mxl5007t_state *state,
|
|
enum mxl5007t_bw_mhz bw)
|
|
{
|
|
u8 val;
|
|
|
|
switch (bw) {
|
|
case MxL_BW_6MHz:
|
|
val = 0x15; /* set DIG_MODEINDEX, DIG_MODEINDEX_A,
|
|
* and DIG_MODEINDEX_CSF */
|
|
break;
|
|
case MxL_BW_7MHz:
|
|
val = 0x2a;
|
|
break;
|
|
case MxL_BW_8MHz:
|
|
val = 0x3f;
|
|
break;
|
|
default:
|
|
mxl_fail(-EINVAL);
|
|
return;
|
|
}
|
|
set_reg_bits(state->tab_rftune, 0x0c, 0x3f, val);
|
|
|
|
return;
|
|
}
|
|
|
|
static struct
|
|
reg_pair_t *mxl5007t_calc_rf_tune_regs(struct mxl5007t_state *state,
|
|
u32 rf_freq, enum mxl5007t_bw_mhz bw)
|
|
{
|
|
u32 dig_rf_freq = 0;
|
|
u32 temp;
|
|
u32 frac_divider = 1000000;
|
|
unsigned int i;
|
|
|
|
memcpy(&state->tab_rftune, ®_pair_rftune, sizeof(reg_pair_rftune));
|
|
|
|
mxl5007t_set_bw_bits(state, bw);
|
|
|
|
/* Convert RF frequency into 16 bits =>
|
|
* 10 bit integer (MHz) + 6 bit fraction */
|
|
dig_rf_freq = rf_freq / MHz;
|
|
|
|
temp = rf_freq % MHz;
|
|
|
|
for (i = 0; i < 6; i++) {
|
|
dig_rf_freq <<= 1;
|
|
frac_divider /= 2;
|
|
if (temp > frac_divider) {
|
|
temp -= frac_divider;
|
|
dig_rf_freq++;
|
|
}
|
|
}
|
|
|
|
/* add to have shift center point by 7.8124 kHz */
|
|
if (temp > 7812)
|
|
dig_rf_freq++;
|
|
|
|
set_reg_bits(state->tab_rftune, 0x0d, 0xff, (u8) dig_rf_freq);
|
|
set_reg_bits(state->tab_rftune, 0x0e, 0xff, (u8) (dig_rf_freq >> 8));
|
|
|
|
if (rf_freq >= 333000000)
|
|
set_reg_bits(state->tab_rftune, 0x80, 0x40, 0x40);
|
|
|
|
return state->tab_rftune;
|
|
}
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
static int mxl5007t_write_reg(struct mxl5007t_state *state, u8 reg, u8 val)
|
|
{
|
|
u8 buf[] = { reg, val };
|
|
struct i2c_msg msg = { .addr = state->i2c_props.addr, .flags = 0,
|
|
.buf = buf, .len = 2 };
|
|
int ret;
|
|
|
|
ret = i2c_transfer(state->i2c_props.adap, &msg, 1);
|
|
if (ret != 1) {
|
|
mxl_err("failed!");
|
|
return -EREMOTEIO;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int mxl5007t_write_regs(struct mxl5007t_state *state,
|
|
struct reg_pair_t *reg_pair)
|
|
{
|
|
unsigned int i = 0;
|
|
int ret = 0;
|
|
|
|
while ((ret == 0) && (reg_pair[i].reg || reg_pair[i].val)) {
|
|
ret = mxl5007t_write_reg(state,
|
|
reg_pair[i].reg, reg_pair[i].val);
|
|
i++;
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
static int mxl5007t_read_reg(struct mxl5007t_state *state, u8 reg, u8 *val)
|
|
{
|
|
struct i2c_msg msg[] = {
|
|
{ .addr = state->i2c_props.addr, .flags = 0,
|
|
.buf = ®, .len = 1 },
|
|
{ .addr = state->i2c_props.addr, .flags = I2C_M_RD,
|
|
.buf = val, .len = 1 },
|
|
};
|
|
int ret;
|
|
|
|
ret = i2c_transfer(state->i2c_props.adap, msg, 2);
|
|
if (ret != 2) {
|
|
mxl_err("failed!");
|
|
return -EREMOTEIO;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int mxl5007t_soft_reset(struct mxl5007t_state *state)
|
|
{
|
|
u8 d = 0xff;
|
|
struct i2c_msg msg = {
|
|
.addr = state->i2c_props.addr, .flags = 0,
|
|
.buf = &d, .len = 1
|
|
};
|
|
int ret = i2c_transfer(state->i2c_props.adap, &msg, 1);
|
|
|
|
if (ret != 1) {
|
|
mxl_err("failed!");
|
|
return -EREMOTEIO;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int mxl5007t_tuner_init(struct mxl5007t_state *state,
|
|
enum mxl5007t_mode mode)
|
|
{
|
|
struct reg_pair_t *init_regs;
|
|
int ret;
|
|
|
|
ret = mxl5007t_soft_reset(state);
|
|
if (mxl_fail(ret))
|
|
goto fail;
|
|
|
|
/* calculate initialization reg array */
|
|
init_regs = mxl5007t_calc_init_regs(state, mode);
|
|
|
|
ret = mxl5007t_write_regs(state, init_regs);
|
|
if (mxl_fail(ret))
|
|
goto fail;
|
|
mdelay(1);
|
|
fail:
|
|
return ret;
|
|
}
|
|
|
|
static int mxl5007t_tuner_rf_tune(struct mxl5007t_state *state, u32 rf_freq_hz,
|
|
enum mxl5007t_bw_mhz bw)
|
|
{
|
|
struct reg_pair_t *rf_tune_regs;
|
|
int ret;
|
|
|
|
/* calculate channel change reg array */
|
|
rf_tune_regs = mxl5007t_calc_rf_tune_regs(state, rf_freq_hz, bw);
|
|
|
|
ret = mxl5007t_write_regs(state, rf_tune_regs);
|
|
if (mxl_fail(ret))
|
|
goto fail;
|
|
msleep(3);
|
|
fail:
|
|
return ret;
|
|
}
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
static int mxl5007t_synth_lock_status(struct mxl5007t_state *state,
|
|
int *rf_locked, int *ref_locked)
|
|
{
|
|
u8 d;
|
|
int ret;
|
|
|
|
*rf_locked = 0;
|
|
*ref_locked = 0;
|
|
|
|
ret = mxl5007t_read_reg(state, 0xd8, &d);
|
|
if (mxl_fail(ret))
|
|
goto fail;
|
|
|
|
if ((d & 0x0c) == 0x0c)
|
|
*rf_locked = 1;
|
|
|
|
if ((d & 0x03) == 0x03)
|
|
*ref_locked = 1;
|
|
fail:
|
|
return ret;
|
|
}
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
static int mxl5007t_get_status(struct dvb_frontend *fe, u32 *status)
|
|
{
|
|
struct mxl5007t_state *state = fe->tuner_priv;
|
|
int rf_locked, ref_locked, ret;
|
|
|
|
*status = 0;
|
|
|
|
if (fe->ops.i2c_gate_ctrl)
|
|
fe->ops.i2c_gate_ctrl(fe, 1);
|
|
|
|
ret = mxl5007t_synth_lock_status(state, &rf_locked, &ref_locked);
|
|
if (mxl_fail(ret))
|
|
goto fail;
|
|
mxl_debug("%s%s", rf_locked ? "rf locked " : "",
|
|
ref_locked ? "ref locked" : "");
|
|
|
|
if ((rf_locked) || (ref_locked))
|
|
*status |= TUNER_STATUS_LOCKED;
|
|
fail:
|
|
if (fe->ops.i2c_gate_ctrl)
|
|
fe->ops.i2c_gate_ctrl(fe, 0);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
static int mxl5007t_set_params(struct dvb_frontend *fe,
|
|
struct dvb_frontend_parameters *params)
|
|
{
|
|
struct mxl5007t_state *state = fe->tuner_priv;
|
|
enum mxl5007t_bw_mhz bw;
|
|
enum mxl5007t_mode mode;
|
|
int ret;
|
|
u32 freq = params->frequency;
|
|
|
|
if (fe->ops.info.type == FE_ATSC) {
|
|
switch (params->u.vsb.modulation) {
|
|
case VSB_8:
|
|
case VSB_16:
|
|
mode = MxL_MODE_ATSC;
|
|
break;
|
|
case QAM_64:
|
|
case QAM_256:
|
|
mode = MxL_MODE_CABLE;
|
|
break;
|
|
default:
|
|
mxl_err("modulation not set!");
|
|
return -EINVAL;
|
|
}
|
|
bw = MxL_BW_6MHz;
|
|
} else if (fe->ops.info.type == FE_OFDM) {
|
|
switch (params->u.ofdm.bandwidth) {
|
|
case BANDWIDTH_6_MHZ:
|
|
bw = MxL_BW_6MHz;
|
|
break;
|
|
case BANDWIDTH_7_MHZ:
|
|
bw = MxL_BW_7MHz;
|
|
break;
|
|
case BANDWIDTH_8_MHZ:
|
|
bw = MxL_BW_8MHz;
|
|
break;
|
|
default:
|
|
mxl_err("bandwidth not set!");
|
|
return -EINVAL;
|
|
}
|
|
mode = MxL_MODE_DVBT;
|
|
} else {
|
|
mxl_err("modulation type not supported!");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (fe->ops.i2c_gate_ctrl)
|
|
fe->ops.i2c_gate_ctrl(fe, 1);
|
|
|
|
mutex_lock(&state->lock);
|
|
|
|
ret = mxl5007t_tuner_init(state, mode);
|
|
if (mxl_fail(ret))
|
|
goto fail;
|
|
|
|
ret = mxl5007t_tuner_rf_tune(state, freq, bw);
|
|
if (mxl_fail(ret))
|
|
goto fail;
|
|
|
|
state->frequency = freq;
|
|
state->bandwidth = (fe->ops.info.type == FE_OFDM) ?
|
|
params->u.ofdm.bandwidth : 0;
|
|
fail:
|
|
mutex_unlock(&state->lock);
|
|
|
|
if (fe->ops.i2c_gate_ctrl)
|
|
fe->ops.i2c_gate_ctrl(fe, 0);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
static int mxl5007t_init(struct dvb_frontend *fe)
|
|
{
|
|
struct mxl5007t_state *state = fe->tuner_priv;
|
|
int ret;
|
|
|
|
if (fe->ops.i2c_gate_ctrl)
|
|
fe->ops.i2c_gate_ctrl(fe, 1);
|
|
|
|
/* wake from standby */
|
|
ret = mxl5007t_write_reg(state, 0x01, 0x01);
|
|
mxl_fail(ret);
|
|
|
|
if (fe->ops.i2c_gate_ctrl)
|
|
fe->ops.i2c_gate_ctrl(fe, 0);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int mxl5007t_sleep(struct dvb_frontend *fe)
|
|
{
|
|
struct mxl5007t_state *state = fe->tuner_priv;
|
|
int ret;
|
|
|
|
if (fe->ops.i2c_gate_ctrl)
|
|
fe->ops.i2c_gate_ctrl(fe, 1);
|
|
|
|
/* enter standby mode */
|
|
ret = mxl5007t_write_reg(state, 0x01, 0x00);
|
|
mxl_fail(ret);
|
|
ret = mxl5007t_write_reg(state, 0x0f, 0x00);
|
|
mxl_fail(ret);
|
|
|
|
if (fe->ops.i2c_gate_ctrl)
|
|
fe->ops.i2c_gate_ctrl(fe, 0);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
static int mxl5007t_get_frequency(struct dvb_frontend *fe, u32 *frequency)
|
|
{
|
|
struct mxl5007t_state *state = fe->tuner_priv;
|
|
*frequency = state->frequency;
|
|
return 0;
|
|
}
|
|
|
|
static int mxl5007t_get_bandwidth(struct dvb_frontend *fe, u32 *bandwidth)
|
|
{
|
|
struct mxl5007t_state *state = fe->tuner_priv;
|
|
*bandwidth = state->bandwidth;
|
|
return 0;
|
|
}
|
|
|
|
static int mxl5007t_release(struct dvb_frontend *fe)
|
|
{
|
|
struct mxl5007t_state *state = fe->tuner_priv;
|
|
|
|
mutex_lock(&mxl5007t_list_mutex);
|
|
|
|
if (state)
|
|
hybrid_tuner_release_state(state);
|
|
|
|
mutex_unlock(&mxl5007t_list_mutex);
|
|
|
|
fe->tuner_priv = NULL;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
static struct dvb_tuner_ops mxl5007t_tuner_ops = {
|
|
.info = {
|
|
.name = "MaxLinear MxL5007T",
|
|
},
|
|
.init = mxl5007t_init,
|
|
.sleep = mxl5007t_sleep,
|
|
.set_params = mxl5007t_set_params,
|
|
.get_status = mxl5007t_get_status,
|
|
.get_frequency = mxl5007t_get_frequency,
|
|
.get_bandwidth = mxl5007t_get_bandwidth,
|
|
.release = mxl5007t_release,
|
|
};
|
|
|
|
static int mxl5007t_get_chip_id(struct mxl5007t_state *state)
|
|
{
|
|
char *name;
|
|
int ret;
|
|
u8 id;
|
|
|
|
ret = mxl5007t_read_reg(state, 0xd9, &id);
|
|
if (mxl_fail(ret))
|
|
goto fail;
|
|
|
|
switch (id) {
|
|
case MxL_5007_V1_F1:
|
|
name = "MxL5007.v1.f1";
|
|
break;
|
|
case MxL_5007_V1_F2:
|
|
name = "MxL5007.v1.f2";
|
|
break;
|
|
case MxL_5007_V2_100_F1:
|
|
name = "MxL5007.v2.100.f1";
|
|
break;
|
|
case MxL_5007_V2_100_F2:
|
|
name = "MxL5007.v2.100.f2";
|
|
break;
|
|
case MxL_5007_V2_200_F1:
|
|
name = "MxL5007.v2.200.f1";
|
|
break;
|
|
case MxL_5007_V2_200_F2:
|
|
name = "MxL5007.v2.200.f2";
|
|
break;
|
|
case MxL_5007_V4:
|
|
name = "MxL5007T.v4";
|
|
break;
|
|
default:
|
|
name = "MxL5007T";
|
|
printk(KERN_WARNING "%s: unknown rev (%02x)\n", __func__, id);
|
|
id = MxL_UNKNOWN_ID;
|
|
}
|
|
state->chip_id = id;
|
|
mxl_info("%s detected @ %d-%04x", name,
|
|
i2c_adapter_id(state->i2c_props.adap),
|
|
state->i2c_props.addr);
|
|
return 0;
|
|
fail:
|
|
mxl_warn("unable to identify device @ %d-%04x",
|
|
i2c_adapter_id(state->i2c_props.adap),
|
|
state->i2c_props.addr);
|
|
|
|
state->chip_id = MxL_UNKNOWN_ID;
|
|
return ret;
|
|
}
|
|
|
|
struct dvb_frontend *mxl5007t_attach(struct dvb_frontend *fe,
|
|
struct i2c_adapter *i2c, u8 addr,
|
|
struct mxl5007t_config *cfg)
|
|
{
|
|
struct mxl5007t_state *state = NULL;
|
|
int instance, ret;
|
|
|
|
mutex_lock(&mxl5007t_list_mutex);
|
|
instance = hybrid_tuner_request_state(struct mxl5007t_state, state,
|
|
hybrid_tuner_instance_list,
|
|
i2c, addr, "mxl5007t");
|
|
switch (instance) {
|
|
case 0:
|
|
goto fail;
|
|
case 1:
|
|
/* new tuner instance */
|
|
state->config = cfg;
|
|
|
|
mutex_init(&state->lock);
|
|
|
|
if (fe->ops.i2c_gate_ctrl)
|
|
fe->ops.i2c_gate_ctrl(fe, 1);
|
|
|
|
ret = mxl5007t_get_chip_id(state);
|
|
|
|
if (fe->ops.i2c_gate_ctrl)
|
|
fe->ops.i2c_gate_ctrl(fe, 0);
|
|
|
|
/* check return value of mxl5007t_get_chip_id */
|
|
if (mxl_fail(ret))
|
|
goto fail;
|
|
break;
|
|
default:
|
|
/* existing tuner instance */
|
|
break;
|
|
}
|
|
fe->tuner_priv = state;
|
|
mutex_unlock(&mxl5007t_list_mutex);
|
|
|
|
memcpy(&fe->ops.tuner_ops, &mxl5007t_tuner_ops,
|
|
sizeof(struct dvb_tuner_ops));
|
|
|
|
return fe;
|
|
fail:
|
|
mutex_unlock(&mxl5007t_list_mutex);
|
|
|
|
mxl5007t_release(fe);
|
|
return NULL;
|
|
}
|
|
EXPORT_SYMBOL_GPL(mxl5007t_attach);
|
|
MODULE_DESCRIPTION("MaxLinear MxL5007T Silicon IC tuner driver");
|
|
MODULE_AUTHOR("Michael Krufky <mkrufky@linuxtv.org>");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_VERSION("0.2");
|
|
|
|
/*
|
|
* Overrides for Emacs so that we follow Linus's tabbing style.
|
|
* ---------------------------------------------------------------------------
|
|
* Local variables:
|
|
* c-basic-offset: 8
|
|
* End:
|
|
*/
|