/************************************************************************** * * Copyright © 2009 VMware, Inc., Palo Alto, CA., USA * All Rights Reserved. * * Permission is hereby granted, free of charge, to any person obtaining a * copy of this software and associated documentation files (the * "Software"), to deal in the Software without restriction, including * without limitation the rights to use, copy, modify, merge, publish, * distribute, sub license, and/or sell copies of the Software, and to * permit persons to whom the Software is furnished to do so, subject to * the following conditions: * * The above copyright notice and this permission notice (including the * next paragraph) shall be included in all copies or substantial portions * of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL * THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE * USE OR OTHER DEALINGS IN THE SOFTWARE. * **************************************************************************/ #ifndef __VMWGFX_DRM_H__ #define __VMWGFX_DRM_H__ #define DRM_VMW_MAX_SURFACE_FACES 6 #define DRM_VMW_MAX_MIP_LEVELS 24 #define DRM_VMW_EXT_NAME_LEN 128 #define DRM_VMW_GET_PARAM 0 #define DRM_VMW_ALLOC_DMABUF 1 #define DRM_VMW_UNREF_DMABUF 2 #define DRM_VMW_CURSOR_BYPASS 3 /* guarded by DRM_VMW_PARAM_NUM_STREAMS != 0*/ #define DRM_VMW_CONTROL_STREAM 4 #define DRM_VMW_CLAIM_STREAM 5 #define DRM_VMW_UNREF_STREAM 6 /* guarded by DRM_VMW_PARAM_3D == 1 */ #define DRM_VMW_CREATE_CONTEXT 7 #define DRM_VMW_UNREF_CONTEXT 8 #define DRM_VMW_CREATE_SURFACE 9 #define DRM_VMW_UNREF_SURFACE 10 #define DRM_VMW_REF_SURFACE 11 #define DRM_VMW_EXECBUF 12 #define DRM_VMW_GET_3D_CAP 13 #define DRM_VMW_FENCE_WAIT 14 #define DRM_VMW_FENCE_SIGNALED 15 #define DRM_VMW_FENCE_UNREF 16 #define DRM_VMW_FENCE_EVENT 17 /*************************************************************************/ /** * DRM_VMW_GET_PARAM - get device information. * * DRM_VMW_PARAM_FIFO_OFFSET: * Offset to use to map the first page of the FIFO read-only. * The fifo is mapped using the mmap() system call on the drm device. * * DRM_VMW_PARAM_OVERLAY_IOCTL: * Does the driver support the overlay ioctl. */ #define DRM_VMW_PARAM_NUM_STREAMS 0 #define DRM_VMW_PARAM_NUM_FREE_STREAMS 1 #define DRM_VMW_PARAM_3D 2 #define DRM_VMW_PARAM_HW_CAPS 3 #define DRM_VMW_PARAM_FIFO_CAPS 4 #define DRM_VMW_PARAM_MAX_FB_SIZE 5 #define DRM_VMW_PARAM_FIFO_HW_VERSION 6 /** * struct drm_vmw_getparam_arg * * @value: Returned value. //Out * @param: Parameter to query. //In. * * Argument to the DRM_VMW_GET_PARAM Ioctl. */ struct drm_vmw_getparam_arg { uint64_t value; uint32_t param; uint32_t pad64; }; /*************************************************************************/ /** * DRM_VMW_EXTENSION - Query device extensions. */ /** * struct drm_vmw_extension_rep * * @exists: The queried extension exists. * @driver_ioctl_offset: Ioctl number of the first ioctl in the extension. * @driver_sarea_offset: Offset to any space in the DRI SAREA * used by the extension. * @major: Major version number of the extension. * @minor: Minor version number of the extension. * @pl: Patch level version number of the extension. * * Output argument to the DRM_VMW_EXTENSION Ioctl. */ struct drm_vmw_extension_rep { int32_t exists; uint32_t driver_ioctl_offset; uint32_t driver_sarea_offset; uint32_t major; uint32_t minor; uint32_t pl; uint32_t pad64; }; /** * union drm_vmw_extension_arg * * @extension - Ascii name of the extension to be queried. //In * @rep - Reply as defined above. //Out * * Argument to the DRM_VMW_EXTENSION Ioctl. */ union drm_vmw_extension_arg { char extension[DRM_VMW_EXT_NAME_LEN]; struct drm_vmw_extension_rep rep; }; /*************************************************************************/ /** * DRM_VMW_CREATE_CONTEXT - Create a host context. * * Allocates a device unique context id, and queues a create context command * for the host. Does not wait for host completion. */ /** * struct drm_vmw_context_arg * * @cid: Device unique context ID. * * Output argument to the DRM_VMW_CREATE_CONTEXT Ioctl. * Input argument to the DRM_VMW_UNREF_CONTEXT Ioctl. */ struct drm_vmw_context_arg { int32_t cid; uint32_t pad64; }; /*************************************************************************/ /** * DRM_VMW_UNREF_CONTEXT - Create a host context. * * Frees a global context id, and queues a destroy host command for the host. * Does not wait for host completion. The context ID can be used directly * in the command stream and shows up as the same context ID on the host. */ /*************************************************************************/ /** * DRM_VMW_CREATE_SURFACE - Create a host suface. * * Allocates a device unique surface id, and queues a create surface command * for the host. Does not wait for host completion. The surface ID can be * used directly in the command stream and shows up as the same surface * ID on the host. */ /** * struct drm_wmv_surface_create_req * * @flags: Surface flags as understood by the host. * @format: Surface format as understood by the host. * @mip_levels: Number of mip levels for each face. * An unused face should have 0 encoded. * @size_addr: Address of a user-space array of sruct drm_vmw_size * cast to an uint64_t for 32-64 bit compatibility. * The size of the array should equal the total number of mipmap levels. * @shareable: Boolean whether other clients (as identified by file descriptors) * may reference this surface. * @scanout: Boolean whether the surface is intended to be used as a * scanout. * * Input data to the DRM_VMW_CREATE_SURFACE Ioctl. * Output data from the DRM_VMW_REF_SURFACE Ioctl. */ struct drm_vmw_surface_create_req { uint32_t flags; uint32_t format; uint32_t mip_levels[DRM_VMW_MAX_SURFACE_FACES]; uint64_t size_addr; int32_t shareable; int32_t scanout; }; /** * struct drm_wmv_surface_arg * * @sid: Surface id of created surface or surface to destroy or reference. * * Output data from the DRM_VMW_CREATE_SURFACE Ioctl. * Input argument to the DRM_VMW_UNREF_SURFACE Ioctl. * Input argument to the DRM_VMW_REF_SURFACE Ioctl. */ struct drm_vmw_surface_arg { int32_t sid; uint32_t pad64; }; /** * struct drm_vmw_size ioctl. * * @width - mip level width * @height - mip level height * @depth - mip level depth * * Description of a mip level. * Input data to the DRM_WMW_CREATE_SURFACE Ioctl. */ struct drm_vmw_size { uint32_t width; uint32_t height; uint32_t depth; uint32_t pad64; }; /** * union drm_vmw_surface_create_arg * * @rep: Output data as described above. * @req: Input data as described above. * * Argument to the DRM_VMW_CREATE_SURFACE Ioctl. */ union drm_vmw_surface_create_arg { struct drm_vmw_surface_arg rep; struct drm_vmw_surface_create_req req; }; /*************************************************************************/ /** * DRM_VMW_REF_SURFACE - Reference a host surface. * * Puts a reference on a host surface with a give sid, as previously * returned by the DRM_VMW_CREATE_SURFACE ioctl. * A reference will make sure the surface isn't destroyed while we hold * it and will allow the calling client to use the surface ID in the command * stream. * * On successful return, the Ioctl returns the surface information given * in the DRM_VMW_CREATE_SURFACE ioctl. */ /** * union drm_vmw_surface_reference_arg * * @rep: Output data as described above. * @req: Input data as described above. * * Argument to the DRM_VMW_REF_SURFACE Ioctl. */ union drm_vmw_surface_reference_arg { struct drm_vmw_surface_create_req rep; struct drm_vmw_surface_arg req; }; /*************************************************************************/ /** * DRM_VMW_UNREF_SURFACE - Unreference a host surface. * * Clear a reference previously put on a host surface. * When all references are gone, including the one implicitly placed * on creation, * a destroy surface command will be queued for the host. * Does not wait for completion. */ /*************************************************************************/ /** * DRM_VMW_EXECBUF * * Submit a command buffer for execution on the host, and return a * fence seqno that when signaled, indicates that the command buffer has * executed. */ /** * struct drm_vmw_execbuf_arg * * @commands: User-space address of a command buffer cast to an uint64_t. * @command-size: Size in bytes of the command buffer. * @throttle-us: Sleep until software is less than @throttle_us * microseconds ahead of hardware. The driver may round this value * to the nearest kernel tick. * @fence_rep: User-space address of a struct drm_vmw_fence_rep cast to an * uint64_t. * @version: Allows expanding the execbuf ioctl parameters without breaking * backwards compatibility, since user-space will always tell the kernel * which version it uses. * @flags: Execbuf flags. None currently. * * Argument to the DRM_VMW_EXECBUF Ioctl. */ #define DRM_VMW_EXECBUF_VERSION 0 struct drm_vmw_execbuf_arg { uint64_t commands; uint32_t command_size; uint32_t throttle_us; uint64_t fence_rep; uint32_t version; uint32_t flags; }; /** * struct drm_vmw_fence_rep * * @handle: Fence object handle for fence associated with a command submission. * @mask: Fence flags relevant for this fence object. * @seqno: Fence sequence number in fifo. A fence object with a lower * seqno will signal the EXEC flag before a fence object with a higher * seqno. This can be used by user-space to avoid kernel calls to determine * whether a fence has signaled the EXEC flag. Note that @seqno will * wrap at 32-bit. * @passed_seqno: The highest seqno number processed by the hardware * so far. This can be used to mark user-space fence objects as signaled, and * to determine whether a fence seqno might be stale. * @error: This member should've been set to -EFAULT on submission. * The following actions should be take on completion: * error == -EFAULT: Fence communication failed. The host is synchronized. * Use the last fence id read from the FIFO fence register. * error != 0 && error != -EFAULT: * Fence submission failed. The host is synchronized. Use the fence_seq member. * error == 0: All is OK, The host may not be synchronized. * Use the fence_seq member. * * Input / Output data to the DRM_VMW_EXECBUF Ioctl. */ struct drm_vmw_fence_rep { uint32_t handle; uint32_t mask; uint32_t seqno; uint32_t passed_seqno; uint32_t pad64; int32_t error; }; /*************************************************************************/ /** * DRM_VMW_ALLOC_DMABUF * * Allocate a DMA buffer that is visible also to the host. * NOTE: The buffer is * identified by a handle and an offset, which are private to the guest, but * useable in the command stream. The guest kernel may translate these * and patch up the command stream accordingly. In the future, the offset may * be zero at all times, or it may disappear from the interface before it is * fixed. * * The DMA buffer may stay user-space mapped in the guest at all times, * and is thus suitable for sub-allocation. * * DMA buffers are mapped using the mmap() syscall on the drm device. */ /** * struct drm_vmw_alloc_dmabuf_req * * @size: Required minimum size of the buffer. * * Input data to the DRM_VMW_ALLOC_DMABUF Ioctl. */ struct drm_vmw_alloc_dmabuf_req { uint32_t size; uint32_t pad64; }; /** * struct drm_vmw_dmabuf_rep * * @map_handle: Offset to use in the mmap() call used to map the buffer. * @handle: Handle unique to this buffer. Used for unreferencing. * @cur_gmr_id: GMR id to use in the command stream when this buffer is * referenced. See not above. * @cur_gmr_offset: Offset to use in the command stream when this buffer is * referenced. See note above. * * Output data from the DRM_VMW_ALLOC_DMABUF Ioctl. */ struct drm_vmw_dmabuf_rep { uint64_t map_handle; uint32_t handle; uint32_t cur_gmr_id; uint32_t cur_gmr_offset; uint32_t pad64; }; /** * union drm_vmw_dmabuf_arg * * @req: Input data as described above. * @rep: Output data as described above. * * Argument to the DRM_VMW_ALLOC_DMABUF Ioctl. */ union drm_vmw_alloc_dmabuf_arg { struct drm_vmw_alloc_dmabuf_req req; struct drm_vmw_dmabuf_rep rep; }; /*************************************************************************/ /** * DRM_VMW_UNREF_DMABUF - Free a DMA buffer. * */ /** * struct drm_vmw_unref_dmabuf_arg * * @handle: Handle indicating what buffer to free. Obtained from the * DRM_VMW_ALLOC_DMABUF Ioctl. * * Argument to the DRM_VMW_UNREF_DMABUF Ioctl. */ struct drm_vmw_unref_dmabuf_arg { uint32_t handle; uint32_t pad64; }; /*************************************************************************/ /** * DRM_VMW_CONTROL_STREAM - Control overlays, aka streams. * * This IOCTL controls the overlay units of the svga device. * The SVGA overlay units does not work like regular hardware units in * that they do not automaticaly read back the contents of the given dma * buffer. But instead only read back for each call to this ioctl, and * at any point between this call being made and a following call that * either changes the buffer or disables the stream. */ /** * struct drm_vmw_rect * * Defines a rectangle. Used in the overlay ioctl to define * source and destination rectangle. */ struct drm_vmw_rect { int32_t x; int32_t y; uint32_t w; uint32_t h; }; /** * struct drm_vmw_control_stream_arg * * @stream_id: Stearm to control * @enabled: If false all following arguments are ignored. * @handle: Handle to buffer for getting data from. * @format: Format of the overlay as understood by the host. * @width: Width of the overlay. * @height: Height of the overlay. * @size: Size of the overlay in bytes. * @pitch: Array of pitches, the two last are only used for YUV12 formats. * @offset: Offset from start of dma buffer to overlay. * @src: Source rect, must be within the defined area above. * @dst: Destination rect, x and y may be negative. * * Argument to the DRM_VMW_CONTROL_STREAM Ioctl. */ struct drm_vmw_control_stream_arg { uint32_t stream_id; uint32_t enabled; uint32_t flags; uint32_t color_key; uint32_t handle; uint32_t offset; int32_t format; uint32_t size; uint32_t width; uint32_t height; uint32_t pitch[3]; uint32_t pad64; struct drm_vmw_rect src; struct drm_vmw_rect dst; }; /*************************************************************************/ /** * DRM_VMW_CURSOR_BYPASS - Give extra information about cursor bypass. * */ #define DRM_VMW_CURSOR_BYPASS_ALL (1 << 0) #define DRM_VMW_CURSOR_BYPASS_FLAGS (1) /** * struct drm_vmw_cursor_bypass_arg * * @flags: Flags. * @crtc_id: Crtc id, only used if DMR_CURSOR_BYPASS_ALL isn't passed. * @xpos: X position of cursor. * @ypos: Y position of cursor. * @xhot: X hotspot. * @yhot: Y hotspot. * * Argument to the DRM_VMW_CURSOR_BYPASS Ioctl. */ struct drm_vmw_cursor_bypass_arg { uint32_t flags; uint32_t crtc_id; int32_t xpos; int32_t ypos; int32_t xhot; int32_t yhot; }; /*************************************************************************/ /** * DRM_VMW_CLAIM_STREAM - Claim a single stream. */ /** * struct drm_vmw_context_arg * * @stream_id: Device unique context ID. * * Output argument to the DRM_VMW_CREATE_CONTEXT Ioctl. * Input argument to the DRM_VMW_UNREF_CONTEXT Ioctl. */ struct drm_vmw_stream_arg { uint32_t stream_id; uint32_t pad64; }; /*************************************************************************/ /** * DRM_VMW_UNREF_STREAM - Unclaim a stream. * * Return a single stream that was claimed by this process. Also makes * sure that the stream has been stopped. */ /*************************************************************************/ /** * DRM_VMW_GET_3D_CAP * * Read 3D capabilities from the FIFO * */ /** * struct drm_vmw_get_3d_cap_arg * * @buffer: Pointer to a buffer for capability data, cast to an uint64_t * @size: Max size to copy * * Input argument to the DRM_VMW_GET_3D_CAP_IOCTL * ioctls. */ struct drm_vmw_get_3d_cap_arg { uint64_t buffer; uint32_t max_size; uint32_t pad64; }; /*************************************************************************/ /** * DRM_VMW_UPDATE_LAYOUT - Update layout * * Updates the preferred modes and connection status for connectors. The * command conisits of one drm_vmw_update_layout_arg pointing out a array * of num_outputs drm_vmw_rect's. */ /** * struct drm_vmw_update_layout_arg * * @num_outputs: number of active * @rects: pointer to array of drm_vmw_rect * * Input argument to the DRM_VMW_UPDATE_LAYOUT Ioctl. */ struct drm_vmw_update_layout_arg { uint32_t num_outputs; uint32_t pad64; uint64_t rects; }; /*************************************************************************/ /** * DRM_VMW_FENCE_WAIT * * Waits for a fence object to signal. The wait is interruptible, so that * signals may be delivered during the interrupt. The wait may timeout, * in which case the calls returns -EBUSY. If the wait is restarted, * that is restarting without resetting @cookie_valid to zero, * the timeout is computed from the first call. * * The flags argument to the DRM_VMW_FENCE_WAIT ioctl indicates what to wait * on: * DRM_VMW_FENCE_FLAG_EXEC: All commands ahead of the fence in the command * stream * have executed. * DRM_VMW_FENCE_FLAG_QUERY: All query results resulting from query finish * commands * in the buffer given to the EXECBUF ioctl returning the fence object handle * are available to user-space. * * DRM_VMW_WAIT_OPTION_UNREF: If this wait option is given, and the * fenc wait ioctl returns 0, the fence object has been unreferenced after * the wait. */ #define DRM_VMW_FENCE_FLAG_EXEC (1 << 0) #define DRM_VMW_FENCE_FLAG_QUERY (1 << 1) #define DRM_VMW_WAIT_OPTION_UNREF (1 << 0) /** * struct drm_vmw_fence_wait_arg * * @handle: Fence object handle as returned by the DRM_VMW_EXECBUF ioctl. * @cookie_valid: Must be reset to 0 on first call. Left alone on restart. * @kernel_cookie: Set to 0 on first call. Left alone on restart. * @timeout_us: Wait timeout in microseconds. 0 for indefinite timeout. * @lazy: Set to 1 if timing is not critical. Allow more than a kernel tick * before returning. * @flags: Fence flags to wait on. * @wait_options: Options that control the behaviour of the wait ioctl. * * Input argument to the DRM_VMW_FENCE_WAIT ioctl. */ struct drm_vmw_fence_wait_arg { uint32_t handle; int32_t cookie_valid; uint64_t kernel_cookie; uint64_t timeout_us; int32_t lazy; int32_t flags; int32_t wait_options; int32_t pad64; }; /*************************************************************************/ /** * DRM_VMW_FENCE_SIGNALED * * Checks if a fence object is signaled.. */ /** * struct drm_vmw_fence_signaled_arg * * @handle: Fence object handle as returned by the DRM_VMW_EXECBUF ioctl. * @flags: Fence object flags input to DRM_VMW_FENCE_SIGNALED ioctl * @signaled: Out: Flags signaled. * @sequence: Out: Highest sequence passed so far. Can be used to signal the * EXEC flag of user-space fence objects. * * Input/Output argument to the DRM_VMW_FENCE_SIGNALED and DRM_VMW_FENCE_UNREF * ioctls. */ struct drm_vmw_fence_signaled_arg { uint32_t handle; uint32_t flags; int32_t signaled; uint32_t passed_seqno; uint32_t signaled_flags; uint32_t pad64; }; /*************************************************************************/ /** * DRM_VMW_FENCE_UNREF * * Unreferences a fence object, and causes it to be destroyed if there are no * other references to it. * */ /** * struct drm_vmw_fence_arg * * @handle: Fence object handle as returned by the DRM_VMW_EXECBUF ioctl. * * Input/Output argument to the DRM_VMW_FENCE_UNREF ioctl.. */ struct drm_vmw_fence_arg { uint32_t handle; uint32_t pad64; }; #endif