What: /sys/class/net//mesh/aggregated_ogms Date: May 2010 Contact: Marek Lindner Description: Indicates whether the batman protocol messages of the mesh shall be aggregated or not. What: /sys/class/net//mesh//ap_isolation Date: May 2011 Contact: Antonio Quartulli Description: Indicates whether the data traffic going from a wireless client to another wireless client will be silently dropped. is empty when referring to the untagged lan. What: /sys/class/net//mesh/bonding Date: June 2010 Contact: Simon Wunderlich Description: Indicates whether the data traffic going through the mesh will be sent using multiple interfaces at the same time (if available). What: /sys/class/net//mesh/bridge_loop_avoidance Date: November 2011 Contact: Simon Wunderlich Description: Indicates whether the bridge loop avoidance feature is enabled. This feature detects and avoids loops between the mesh and devices bridged with the soft interface . What: /sys/class/net//mesh/fragmentation Date: October 2010 Contact: Andreas Langer Description: Indicates whether the data traffic going through the mesh will be fragmented or silently discarded if the packet size exceeds the outgoing interface MTU. What: /sys/class/net//mesh/gw_bandwidth Date: October 2010 Contact: Marek Lindner Description: Defines the bandwidth which is propagated by this node if gw_mode was set to 'server'. What: /sys/class/net//mesh/gw_mode Date: October 2010 Contact: Marek Lindner Description: Defines the state of the gateway features. Can be either 'off', 'client' or 'server'. What: /sys/class/net//mesh/gw_sel_class Date: October 2010 Contact: Marek Lindner Description: Defines the selection criteria this node will use to choose a gateway if gw_mode was set to 'client'. What: /sys/class/net//mesh/hop_penalty Date: Oct 2010 Contact: Linus Lüssing Description: Defines the penalty which will be applied to an originator message's tq-field on every hop. What: /sys/class/net//mesh/isolation_mark Date: Nov 2013 Contact: Antonio Quartulli Description: Defines the isolation mark (and its bitmask) which is used to classify clients as "isolated" by the Extended Isolation feature. What: /sys/class/net//mesh/network_coding Date: Nov 2012 Contact: Martin Hundeboll Description: Controls whether Network Coding (using some magic to send fewer wifi packets but still the same content) is enabled or not. What: /sys/class/net//mesh/orig_interval Date: May 2010 Contact: Marek Lindner Description: Defines the interval in milliseconds in which batman sends its protocol messages. What: /sys/class/net//mesh/routing_algo Date: Dec 2011 Contact: Marek Lindner Description: Defines the routing procotol this mesh instance uses to find the optimal paths through the mesh.