.
drivers/staging/zcache/zbud.c:336: warning: passing argument 4 of ‘debugfs_create_size_t’ from incompatible pointer type
include/linux/debugfs.h:80: note: expected ‘size_t *’ but argument is of type ‘long unsigned int *’
..
which is b/c we end up using 'unsigned' or 'unsigned long' instead
of 'ssize_t'. So lets fix this up and use the proper type.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We get tons of "note: expected ‘size_t *’ but argument is of type ‘long
int *’" warnings. This fixes it.
Acked-by: Dan Magenheimer <dan.magenheimer@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When we compile we get tons of:
include/linux/debugfs.h:80:16: note: expected ‘size_t *’ but argument is
of type ‘long int *’
drivers/staging/zcache/zcache-main.c:279:2: warning: passing argument 4
of ‘debugfs_create_size_t’ from incompatible pointer type [enabled by d
efault]
which is b/c we end up using 'unsigned' or 'unsigned long' instead
of 'ssize_t'. So lets fix this up and use the proper type.
[v2: Rebased directly on staging]
Acked-by: Dan Magenheimer <dan.magenheimer@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Clang/scan-build complains about a possible buffer overflow in
ieee80211_wx_get_name:
.../staging/rtl8192u/ieee80211/ieee80211_softmac_wx.c:499:3:
warning: String copy function overflows destination buffer
strcat(wrqu->name," link..");
.../staging/rtl8192u/ieee80211/ieee80211_softmac_wx.c:497:3:
warning: String copy function overflows destination buffer
strcat(wrqu->name," linked");
The buffer wrqu->name is only IFNAMSIZ bytes big (currently 16),
so if we have a "802.11b/g/n linked" device we overrun the buffer by 3
bytes.
-> Use strlcopy / strlcat to populate the name.
This is done in a similar fashion in
staging/rtl8187se/ieee80211/ieee80211_softmac_wx.c
While at it cleaned some whitespace issues.
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
clang/scan-build complains that:
p80211netdev.c:451:6: warning: Branch condition evaluates to a garbage
value
if ((p80211_wep.data) && (p80211_wep.data != skb->data))
^~~~~~~~~~~~~~~~~
This can happen in p80211knetdev_hard_start_xmit if
- if (wlandev->state != WLAN_DEVICE_OPEN) evaluates to true.
the execution flow then continues at the 'failed' label where
p80211_wep.data is used without being initialized first.
-> Initialize the data field to NULL to fix this issue.
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In vmk80xx_do_insn_bits the local variable reg, which is used as an
index to the tx_buf array, can be used uninitialized if
- data[0] == 0
and
- devpriv->model != VMK8061_MODEL
-> we get into the else branch without having reg initialized.
Since the driver usually differentiates between VMK8061_MODEL and
VMK8055_MODEL it's safe to assume that VMK8055_DO_REG was meant as an
initial value.
And to avoid duplication we can move the assignments to the top.
Acked-by: Ian Abbott <abbotti@mev.co.uk>
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
delete_msg_mgr on a NULL pointer is a no-op, so the NULL check in
bridge_msg_delete can be removed.
Signed-off-by: Cyril Roelandt <tipecaml@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
unregister_dgrp_device on a NULL pointer is a no-op, so the NULL checks in
dgrp_remove_nd() can be removed.
Signed-off-by: Cyril Roelandt <tipecaml@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It was observed by Andrea Arcangeli in 2011 that zcache can get "full"
and there must be some way for compressed swap pages to be (uncompressed
and then) sent through to the backing swap disk. A prototype of this
functionality, called "unuse", was added in 2012 as part of a major update
to zcache (aka "zcache2"), but was left unfinished due to the unfortunate
temporary fork of zcache.
This earlier version of the code had an unresolved memory leak
and was anyway dependent on not-yet-upstream frontswap and mm changes.
The code was meanwhile adapted by Seth Jennings for similar
functionality in zswap (which he calls "flush"). Seth also made some
clever simplifications which are herein ported back to zcache. As a
result of those simplifications, the frontswap changes are no longer
necessary, but a slightly different (and simpler) set of mm changes are
still required [1]. The memory leak is also fixed.
Due to feedback from akpm in a zswap thread, this functionality in zcache
has now been renamed from "unuse" to "writeback".
Although this zcache writeback code now works, there are open questions
as how best to handle the policy that drives it. As a result, this
patch also ties writeback to a new config option. And, since the
code still depends on not-yet-upstreamed mm patches, to avoid build
problems, the config option added by this patch temporarily depends
on "BROKEN"; this config dependency can be removed in trees that
contain the necessary mm patches.
[1] https://lkml.org/lkml/2013/1/29/540/https://lkml.org/lkml/2013/1/29/539/
Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
alloc failures already get standardized OOM
messages and a dump_stack.
For the affected mallocs around these OOM messages:
Converted kzallocs with multiplies to kcalloc.
Converted kmallocs with multiplies to kmalloc_array.
Converted a kmalloc/strlen/strncpy to kstrdup.
Moved a spin_lock below a removed OOM message and
removed a now unnecessary spin_unlock.
Neatened alignment and whitespace.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+ a new spi helper function.
1) Introduce spi_sync_transfer and use it within IIO. Originally
it was envisioned that this nice little boilerplate replacement
would go through the spi tree, but Grant Likely stated he'd
prefer we take it through IIO as the example usecases were all
in IIO (and are also in this pull request). Note that given
their may have been some unresolved elements related to the
coccinelle element of the patch, that has been stripped out
and will doubtlessly follow at a later date (along with
lots of other patches for drivers elsewhere in the tree).
2) New Invensense MPU6050 driver. This is stripped down to pretty
much the basics from the original submission with the intent
to build up all the fancy bits in an incremental (and hence
reviewable fashion). It's been through a good few revisions
so nice to finally merge this.
3) Change to iio_channel_get api to simplify device tree based
mappings. The actual mappings are currently under review.
4) Build fixes for !CONFIG_IIO_TRIGGER in the st_sensors driver.
This one snuck past during review and testing but got picked
up by Randy Dunlap in a randconfig build.
5) Some max1363 cleanups and enhancements.
6) Some comment fixes to make them coherent and comprehensible.
7) Trivial build warning fix in mxs-lradc
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)
iQIcBAABAgAGBQJRF9/7AAoJEFSFNJnE9BaIYJgP+gMbD+knXpWm6o9VSO/mZ2O6
TfpoZsLr8pZIXDbzqrNdO0lC8EYYzyukV3leCJAXhtVSZ3cvdWgjN99rouRcngKP
0CchGTAzK9IpbyHzwG+Yjv5kkwTqF1u5OZmQDSdvTqvoKCIRgSYmS8MleOwJVWmR
x9yO3ogmoPQQiPuFq8D/jm+0v3PfcepSjnTY3d24uNpbLqUjQ1vMLDNKf4Ipb+XD
jykWVVxYet3+om6PuRLEHs7PeLoIsCY79xdh+43m00eoYel65rrqFzVeuEGUYgzl
EMhiaZ4GU2EKe3xAgDLykYp2PO/WlvDrhlAfuCXnuuMBsAMl8aZ+da4cwT57Agd8
D2XNvmLyPeLuHyQWtT68LqPsoXBCs1ZosfdHslJ2MbQcB6JSPvFShhUKmw3rL8wY
ksp8sU37ouGpWLV2anGxMtVJHaglFrpt4TYO1QWfbRcKfsYJ2l28YJ0JtgJVF7D+
G3GDOSsUtJNLSgc7WxbONw6BWeWq34nGQPRmHAgKOQkjLxzcK5WTu7GAs7gCpCLW
JrK1bJ8+ai6HdVPKFzgLgRTi5IdUCLLFr19cQDnPoPViB0krv+58jtglpxF0ZbUH
fK0OUh/F4CO2SX/bYCxqLPZ0TkUTwpxSF5+5rMcEtKW5FXMfvY6+rOLaHhJX5mu6
q37/4gygKhbVdZVl1RO8
=htuw
-----END PGP SIGNATURE-----
Merge tag 'iio-for-3.9d' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
"4th set of IIO new drivers cleanups and fixes for the 3.9 cycle
+ a new spi helper function.
1) Introduce spi_sync_transfer and use it within IIO. Originally
it was envisioned that this nice little boilerplate replacement
would go through the spi tree, but Grant Likely stated he'd
prefer we take it through IIO as the example usecases were all
in IIO (and are also in this pull request). Note that given
their may have been some unresolved elements related to the
coccinelle element of the patch, that has been stripped out
and will doubtlessly follow at a later date (along with
lots of other patches for drivers elsewhere in the tree).
2) New Invensense MPU6050 driver. This is stripped down to pretty
much the basics from the original submission with the intent
to build up all the fancy bits in an incremental (and hence
reviewable fashion). It's been through a good few revisions
so nice to finally merge this.
3) Change to iio_channel_get api to simplify device tree based
mappings. The actual mappings are currently under review.
4) Build fixes for !CONFIG_IIO_TRIGGER in the st_sensors driver.
This one snuck past during review and testing but got picked
up by Randy Dunlap in a randconfig build.
5) Some max1363 cleanups and enhancements.
6) Some comment fixes to make them coherent and comprehensible.
7) Trivial build warning fix in mxs-lradc"
This the basic functional Invensense MPU6050 Device driver.
Signed-off-by: Ge Gao <ggao@invensense.com>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Partly a case of removing unused headers and partly a case
of ifdefing out the iio_trigger_ops structures. This has
come about because of an 'unusual' separation of code in this
driver.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Denis Ciocca <denis.ciocca@st.com>
Also include a couple of forward defs of struct iio_trigger and struct
iio_trigger_ops to avoid doing this in each driver.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Denis Ciocca <denis.ciocca@st.com>
Use the new spi_sync_transfer() helper function instead of open-coding it.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Use the new spi_sync_transfer() helper function instead of open-coding it.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Quite often the pattern used for setting up and transferring a synchronous SPI
transaction looks very much like the following:
struct spi_message msg;
struct spi_transfer xfers[] = {
...
};
spi_message_init(&msg);
spi_message_add_tail(&xfers[0], &msg);
...
spi_message_add_tail(&xfers[ARRAY_SIZE(xfers) - 1], &msg);
ret = spi_sync(&msg);
This patch adds two new helper functions for handling this case. The first
helper function spi_message_init_with_transfers() takes a spi_message and an
array of spi_transfers. It will initialize the message and then call
spi_message_add_tail() for each transfer in the array. E.g. the following
spi_message_init(&msg);
spi_message_add_tail(&xfers[0], &msg);
...
spi_message_add_tail(&xfers[ARRAY_SIZE(xfers) - 1], &msg);
can be rewritten as
spi_message_init_with_transfers(&msg, xfers, ARRAY_SIZE(xfers));
The second function spi_sync_transfer() takes a SPI device and an array of
spi_transfers. It will allocate a new spi_message (on the stack) and add all
transfers in the array to the message. Finally it will call spi_sync() on the
message.
E.g. the follwing
struct spi_message msg;
struct spi_transfer xfers[] = {
...
};
spi_message_init(&msg);
spi_message_add_tail(&xfers[0], &msg);
...
spi_message_add_tail(&xfers[ARRAY_SIZE(xfers) - 1], &msg);
ret = spi_sync(spi, &msg);
can be rewritten as
struct spi_transfer xfers[] = {
...
};
ret = spi_sync_transfer(spi, xfers, ARRAY_SIZE(xfers));
A coccinelle script to find such instances will follow.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The following warning is generated by sparse:
drivers/staging/iio/adc/mxs-lradc.c:118:47: warning: duplicate const
Remove the duplicate const.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
This patch resolve a bugfix when driver is compiled without trigger.
Signed-off-by: Denis Ciocca <denis.ciocca@st.com>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Delete IF_DEF_LVDS check, this function is never called when it's true.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Delete IF_DEF_LVDS check, this function is never called when it's true.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Delete IF_DEF_LVDS check, this function is never called when it's true.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This function is never called when pVBInfo->IF_DEF_LVDS is true, so we
can remove checks and reduce complexity.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Delete IF_DEF_LVDS check, this function is never called when it's true.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Delete IF_DEF_LVDS check, this function is never called when it's true.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
`comedi_alloc_subdevice_minors()` currently prints a message about
running out of minor numbers board device files if it runs out of minor
device numbers. Change it to complain about running out of minor device
numbers for subdevice files as these are in a different range, not
shared with those for board device files.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
`comedi_alloc_subdevice_minor()` currently returns the allocated minor
device number on success. This is not really of any interest to the
caller (in fact the return value is not even checked), so just return 0
on success. If the caller really needs to know the allocated minor
device number it can look in `s->minor`.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If CONFIG_MTD is not set goldfish_nand fails to compile with the
following linker warnings:
drivers/built-in.o: In function `goldfish_nand_remove':
goldfish_nand.c:(.text+0x6e7d0e): undefined reference to
`mtd_device_unregister'
drivers/built-in.o: In function `goldfish_nand_erase':
goldfish_nand.c:(.text+0x6e8ba2): undefined reference to
`mtd_erase_callback'
drivers/built-in.o: In function `goldfish_nand_init_device':
goldfish_nand.c:(.text+0x6e8eba): undefined reference to
`mtd_device_parse_register'
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When building the driver, gcc emits the following warnings:
.../drivers/staging/goldfish/goldfish_nand.c:
In function 'goldfish_nand_read_oob':
goldfish_nand.c:159:2:
warning: format '%x' expects argument of type 'unsigned int', but
argument 3 has type 'size_t' [-Wformat]
goldfish_nand.c:159:2:
warning: format '%x' expects argument of type 'unsigned int', but
argument 4 has type 'size_t' [-Wformat]
In function 'goldfish_nand_write_oob':
goldfish_nand.c:191:2:
warning: format '%x' expects argument of type 'unsigned int', but
argument 3 has type 'size_t' [-Wformat]
goldfish_nand.c:191:2:
warning: format '%x' expects argument of type 'unsigned int', but
argument 4 has type 'size_t' [-Wformat]
In function 'goldfish_nand_read':
goldfish_nand.c:215:2:
warning: format '%x' expects argument of type 'unsigned int', but
argument 3 has type 'size_t' [-Wformat]
In function 'goldfish_nand_write':
goldfish_nand.c:239:2:
warning: format '%x' expects argument of type 'unsigned int', but
argument 3 has type 'size_t' [-Wformat]
-> As defined in the printk-formats use %zx for size_t variables
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The 'if (ret)' after calling comedi_pcmcia_enable() was accidentally
removed in:
Commit: 573a964882
staging: comedi: ni_daq_dio24: use comedi_pcmcia_{enable,disable}
Put if back so that dio24_auto_attach() can finish attaching to
the board after enabling the pcmcia device.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 56810a92c6 (staging: xgifb: use
XGIRegInit()) left 3cc uninitialized, and it may trigger a panic during
probe. Fix this.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The kbuild test robot reported a build error in this driver caused by:
commit: a3ac95195b
staging: comedi: comedi_pcmcia: allow drivers to use a custom conf_check()
This commit changed the comedi_pcmcia_enable() function so that it now
takes two arguments. The new argument is an optional (*conf_check)
function that is passed to pcmcia_loop_config().
This driver uses the default (*conf_check) in comedi_pcmcia.c so just
pass a NULL as the second arg.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For iio_channel_get to work with OF based configurations, it needs the
consumer device pointer instead of the consumer device name as argument.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Anton Vorontsov <anton@enomsg.org>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Implement external reference voltage as regulator named "vref".
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Use pcmcia_request_irq() instead of request_irq() to request the
shared irq for the PCMCIA device. This allows the PCMCIA core to
clean up the registration in pcmcia_disable_device().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the comedi_pcmcia_{enable,disable} helpers to enable/disable
the PCMCIA device.
This driver uses a local (*conf_check) to check the pcmcia_device
configuration.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Allow comedi pcmcia drivers to use a custom conf_check() when calling
comedi_pcmcia_enable() to enable the pcmcia device. If a conf_check()
is not passed the internal comedi_pcmcia_conf_check() will be used.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the comedi_pcmcia_{enable,disable} helpers to enable/disable
the PCMCIA device.
This driver is not an audio device, remove CONF_AUTO_AUDIO from
the link->config_flags.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the comedi_pcmcia_{enable,disable} helpers to enable/disable
the PCMCIA device.
This driver does not use interrupts and is not an audio device, remove
CONF_ENABLE_IRQ and CONF_AUTO_AUDIO from the link->config_flags.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In comedi drivers typically *_attach_common() is used as the 'common'
part of the comedi_driver attach code for drivers that support various
bus types (ISA, PCI, etc.). This driver is specific to a USB device.
To avoid confusion when grepping, rename this function to something
more appropriate.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
git history provides a better Changelog for the driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The vmk8055_range table is a duplicate of the comedi core provided
range_unipolar5 table. Use that instead.
For aesthetic reasons, clean up the formating of the vmk8061_range
table.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If CONFIG_COMEDI_DEBUG is defined a macro is enabled to output some
printk(KERN_REBUG ...) messages. These are just added noise. Remove
it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This define is no longer used by the driver. Remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Konrad Rzeszutek Wilk