Add "-c --perf" option in cpupower-frequency-info to get the performance
and frequency values for AMD P-State.
Commit message amended:
Shuah Khan <skhan@linuxfoundation.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
AMD P-State kernel module is using the fine grain frequency instead of
acpi hardware pstate. So add a function to print performance and
frequency values.
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The print_speed can be as a common function, and expose it into misc
helper header. Then it can be used on other helper files as well.
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The legacy ACPI hardware P-States function has 3 P-States on ACPI table,
the CPU frequency only can be switched between the 3 P-States. While the
processor supports the boost state, it will have another boost state
that the frequency can be higher than P0 state, and the state can be
decoded by the function of decode_pstates() and read by
amd_pci_get_num_boost_states().
However, the new AMD P-State function is different than legacy ACPI
hardware P-State on AMD processors. That has a finer grain frequency
range between the highest and lowest frequency. And boost frequency is
actually the frequency which is mapped on highest performance ratio. The
similar previous P0 frequency is mapped on nominal performance ratio.
If the highest performance on the processor is higher than nominal
performance, then we think the current processor supports the boost
state. And it uses amd_pstate_boost_init() to initialize boost for AMD
P-State function.
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Introduce the marco definitions and access helper function for
AMD P-State sysfs interfaces such as each performance goals and frequency
levels in amd helper file. They will be used to read the sysfs attribute
from AMD P-State cpufreq driver for cpupower utilities.
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Kernel ACPI subsytem introduced the sysfs attributes for acpi cppc
library in below path:
/sys/devices/system/cpu/cpuX/acpi_cppc/
And these attributes will be used for AMD P-State driver to provide some
performance and frequency values.
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Expose the helper into cpufreq header, then cpufreq driver can use this
function to get the sysfs value if it has any specific sysfs interfaces.
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
If kernel starts the AMD P-State module, the cpupower will initial the
capability flag as CPUPOWER_CAP_AMD_PSTATE. And once AMD P-State
capability is set, it won't need to set legacy ACPI relative
capabilities anymore.
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The processor with AMD P-State function also supports legacy ACPI
hardware P-States feature as well. Once driver sets AMD P-State eanbled,
the processor will respond the finer grain AMD P-State feature instead of
legacy ACPI P-States. So it introduces the cpupower_amd_pstate_enabled()
to check whether the current kernel enables AMD P-State or AMD CPUFreq
module.
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Add AMD P-State capability flag in cpupower to indicate AMD new P-State
kernel module support on Ryzen processors.
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Renamed the to-do file to 'TODO' instead of 'ToDo' to
comply with the naming standard.
Signed-off-by: ozkanonur <onurozkan.dev@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The tools name was wrong in the SYNTAX section of the manpage it should
read "idle-set" instead of "idle-info".
Signed-off-by: Andreas Rammhold <andreas@rammhold.de>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Remove the family check for accessing the MSR_AMD_HWCR MSR and replace
it with a cpupower cap flag.
This update also allows for the removal of the local cpupower_cpu_info
variable in cpufreq_has_boost_support() since we no longer need it to
check the family.
Signed-off-by: Nathan Fontenot <nathan.fontenot@amd.com>
Reviewed-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The decode_pstates() routine no longer uses the CPU family and
the caleed routines (get_cof() and get_did()) can grab the family
from the global cpupower_cpu_info struct. These update removes
passing the family arg to all these routines.
Signed-off-by: Nathan Fontenot <nathan.fontenot@amd.com>
Reviewed-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The enabled bit (bit 63) is common for all families so we can remove
the multiple enabled checks based on family and have a common check
for HW pstate enabled.
Signed-off-by: Nathan Fontenot <nathan.fontenot@amd.com>
Reviewed-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The family checks in get_cof() and get_did() need to use the
correct MSR format depending on the family. Add a cpupower
capability for using the pstatedef (family 17h and newer) to
control this instead of direct family checks.
Signed-off-by: Nathan Fontenot <nathan.fontenot@amd.com>
Reviewed-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The pscur variable is set but not uused, just remove it.
This may have previsously been set to validate the MSR_AMD_PSTATE_STATUS
MSR. With the addition of the CPUPOWER_CAP_AMD_HW_PSTATE cap flag this
is no longer needed since the cpuid bit to enable this cap flag also
validates that the MSR_AMD_PSTATE_STATUS MSR is present.
Signed-off-by: Nathan Fontenot <nathan.fontenot@amd.com>
Reviewed-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Add a check in get_cpu_info() for the ability to read frequencies
from hardware and set the CPUPOWER_CAP_AMD_HW_PSTATE cpuid flag.
The cpuid flag is set when CPUID_80000007_EDX[7] is set,
which is all families >= 10h. The check excludes family 14h
because HW pstate reporting was not implemented on family 14h.
This is intended to reduce family checks in the main code paths.
Signed-off-by: Nathan Fontenot <nathan.fontenot@amd.com>
Reviewed-by: Robert Richter <rrichter@amd.com>
Reviewed-by: skhan@linuxfoundation.org
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The name is Core Performance Boost (CPB) for the cpuid flag. Correct
cpuid caps flag to use this name (instead of CBP).
Signed-off-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Nathan Fontenot <nathan.fontenot@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The msr_pstate union struct named fam17h_bits is misleading since
this is the struct to use for all families >= 0x17, not just
for family 0x17. Rename the bits structs to be 'pstate' (for pre
family 17h CPUs) and 'pstatedef' (for CPUs since fam 17h) to align
closer with PPR/BDKG (1) naming.
There are no functional changes as part of this update.
1: AMD Processor Programming Reference (PPR) and BIOS and
Kernel Developer's Guide (BKDG) available at:
http://developer.amd.com/resources/developer-guides-manuals
Signed-off-by: Nathan Fontenot <nathan.fontenot@amd.com>
Reviewed-by: Robert Richter <rrichter@amd.com>
Reviewed-by: skhan@linuxfoundation.org
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
This allows building cpupower in parallel rather than serially.
Signed-off-by: Ivan Babrou <ivan@cloudflare.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
- Use local_clock() instead of jiffies in the cpufreq statistics to
improve accuracy (Viresh Kumar).
- Fix up OPP usage in the cpufreq-dt and qcom-cpufreq-nvmem cpufreq
drivers (Viresh Kumar).
- Clean up the cpufreq core, the intel_pstate driver and the
schedutil cpufreq governor (Rafael Wysocki).
- Fix up error code paths in the sti-cpufreq and mediatek cpufreq
drivers (Yangtao Li, Qinglang Miao).
- Fix cpufreq_online() to return error codes instead of success (0)
in all cases when it fails (Wang ShaoBo).
- Add mt8167 support to the mediatek cpufreq driver and blacklist
mt8516 in the cpufreq-dt-platdev driver (Fabien Parent).
- Modify the tegra194 cpufreq driver to always return values from
the frequency table as the current frequency and clean up that
driver (Sumit Gupta, Jon Hunter).
- Modify the arm_scmi cpufreq driver to allow it to discover the
power scale present in the performance protocol and provide this
information to the Energy Model (Lukasz Luba).
- Add missing MODULE_DEVICE_TABLE to several cpufreq drivers (Pali
Rohár).
- Clean up the CPPC cpufreq driver (Ionela Voinescu).
- Fix NVMEM_IMX_OCOTP dependency in the imx cpufreq driver (Arnd
Bergmann).
- Rework the poling interval selection for the polling state in
cpuidle (Mel Gorman).
- Enable suspend-to-idle for PSCI OSI mode in the PSCI cpuidle
driver (Ulf Hansson).
- Modify the OPP framework to support empty (node-less) OPP tables
in DT for passing dependency information (Nicola Mazzucato).
- Fix potential lockdep issue in the OPP core and clean up the OPP
core (Viresh Kumar).
- Modify dev_pm_opp_put_regulators() to accept a NULL argument and
update its users accordingly (Viresh Kumar).
- Add frequency changes tracepoint to devfreq (Matthias Kaehlcke).
- Add support for governor feature flags to devfreq, make devfreq
sysfs file permissions depend on the governor and clean up the
devfreq core (Chanwoo Choi).
- Clean up the tegra20 devfreq driver and deprecate it to allow
another driver based on EMC_STAT to be used instead of it (Dmitry
Osipenko).
- Add interconnect support to the tegra30 devfreq driver, allow it
to take the interconnect and OPP information from DT and clean it
up ((Dmitry Osipenko).
- Add interconnect support to the exynos-bus devfreq driver along
with interconnect properties documentation (Sylwester Nawrocki).
- Add suport for AMD Fam17h and Fam19h processors to the RAPL power
capping driver (Victor Ding, Kim Phillips).
- Fix handling of overly long constraint names in the powercap
framework (Lukasz Luba).
- Fix the wakeup configuration handling for bridges in the ACPI
device power management core (Rafael Wysocki).
- Add support for using an abstract scale for power units in the
Energy Model (EM) and document it (Lukasz Luba).
- Add em_cpu_energy() micro-optimization to the EM (Pavankumar
Kondeti).
- Modify the generic power domains (genpd) framwework to support
suspend-to-idle (Ulf Hansson).
- Fix creation of debugfs nodes in genpd (Thierry Strudel).
- Clean up genpd (Lina Iyer).
- Clean up the core system-wide suspend code and make it print
driver flags for devices with debug enabled (Alex Shi, Patrice
Chotard, Chen Yu).
- Modify the ACPI system reboot code to make it prepare for system
power off to avoid confusing the platform firmware (Kai-Heng Feng).
- Update the pm-graph (multiple changes, mostly usability-related)
and cpupower (online and offline CPU information support) PM
utilities (Todd Brandt, Brahadambal Srinivasan).
-----BEGIN PGP SIGNATURE-----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=BVdX
-----END PGP SIGNATURE-----
Merge tag 'pm-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These update cpufreq (core and drivers), cpuidle (polling state
implementation and the PSCI driver), the OPP (operating performance
points) framework, devfreq (core and drivers), the power capping RAPL
(Running Average Power Limit) driver, the Energy Model support, the
generic power domains (genpd) framework, the ACPI device power
management, the core system-wide suspend code and power management
utilities.
Specifics:
- Use local_clock() instead of jiffies in the cpufreq statistics to
improve accuracy (Viresh Kumar).
- Fix up OPP usage in the cpufreq-dt and qcom-cpufreq-nvmem cpufreq
drivers (Viresh Kumar).
- Clean up the cpufreq core, the intel_pstate driver and the
schedutil cpufreq governor (Rafael Wysocki).
- Fix up error code paths in the sti-cpufreq and mediatek cpufreq
drivers (Yangtao Li, Qinglang Miao).
- Fix cpufreq_online() to return error codes instead of success (0)
in all cases when it fails (Wang ShaoBo).
- Add mt8167 support to the mediatek cpufreq driver and blacklist
mt8516 in the cpufreq-dt-platdev driver (Fabien Parent).
- Modify the tegra194 cpufreq driver to always return values from the
frequency table as the current frequency and clean up that driver
(Sumit Gupta, Jon Hunter).
- Modify the arm_scmi cpufreq driver to allow it to discover the
power scale present in the performance protocol and provide this
information to the Energy Model (Lukasz Luba).
- Add missing MODULE_DEVICE_TABLE to several cpufreq drivers (Pali
Rohár).
- Clean up the CPPC cpufreq driver (Ionela Voinescu).
- Fix NVMEM_IMX_OCOTP dependency in the imx cpufreq driver (Arnd
Bergmann).
- Rework the poling interval selection for the polling state in
cpuidle (Mel Gorman).
- Enable suspend-to-idle for PSCI OSI mode in the PSCI cpuidle driver
(Ulf Hansson).
- Modify the OPP framework to support empty (node-less) OPP tables in
DT for passing dependency information (Nicola Mazzucato).
- Fix potential lockdep issue in the OPP core and clean up the OPP
core (Viresh Kumar).
- Modify dev_pm_opp_put_regulators() to accept a NULL argument and
update its users accordingly (Viresh Kumar).
- Add frequency changes tracepoint to devfreq (Matthias Kaehlcke).
- Add support for governor feature flags to devfreq, make devfreq
sysfs file permissions depend on the governor and clean up the
devfreq core (Chanwoo Choi).
- Clean up the tegra20 devfreq driver and deprecate it to allow
another driver based on EMC_STAT to be used instead of it (Dmitry
Osipenko).
- Add interconnect support to the tegra30 devfreq driver, allow it to
take the interconnect and OPP information from DT and clean it up
(Dmitry Osipenko).
- Add interconnect support to the exynos-bus devfreq driver along
with interconnect properties documentation (Sylwester Nawrocki).
- Add suport for AMD Fam17h and Fam19h processors to the RAPL power
capping driver (Victor Ding, Kim Phillips).
- Fix handling of overly long constraint names in the powercap
framework (Lukasz Luba).
- Fix the wakeup configuration handling for bridges in the ACPI
device power management core (Rafael Wysocki).
- Add support for using an abstract scale for power units in the
Energy Model (EM) and document it (Lukasz Luba).
- Add em_cpu_energy() micro-optimization to the EM (Pavankumar
Kondeti).
- Modify the generic power domains (genpd) framwework to support
suspend-to-idle (Ulf Hansson).
- Fix creation of debugfs nodes in genpd (Thierry Strudel).
- Clean up genpd (Lina Iyer).
- Clean up the core system-wide suspend code and make it print driver
flags for devices with debug enabled (Alex Shi, Patrice Chotard,
Chen Yu).
- Modify the ACPI system reboot code to make it prepare for system
power off to avoid confusing the platform firmware (Kai-Heng Feng).
- Update the pm-graph (multiple changes, mostly usability-related)
and cpupower (online and offline CPU information support) PM
utilities (Todd Brandt, Brahadambal Srinivasan)"
* tag 'pm-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (86 commits)
cpufreq: Fix cpufreq_online() return value on errors
cpufreq: Fix up several kerneldoc comments
cpufreq: stats: Use local_clock() instead of jiffies
cpufreq: schedutil: Simplify sugov_update_next_freq()
cpufreq: intel_pstate: Simplify intel_cpufreq_update_pstate()
PM: domains: create debugfs nodes when adding power domains
opp: of: Allow empty opp-table with opp-shared
dt-bindings: opp: Allow empty OPP tables
media: venus: dev_pm_opp_put_*() accepts NULL argument
drm/panfrost: dev_pm_opp_put_*() accepts NULL argument
drm/lima: dev_pm_opp_put_*() accepts NULL argument
PM / devfreq: exynos: dev_pm_opp_put_*() accepts NULL argument
cpufreq: qcom-cpufreq-nvmem: dev_pm_opp_put_*() accepts NULL argument
cpufreq: dt: dev_pm_opp_put_regulators() accepts NULL argument
opp: Allow dev_pm_opp_put_*() APIs to accept NULL opp_table
opp: Don't create an OPP table from dev_pm_opp_get_opp_table()
cpufreq: dt: Don't (ab)use dev_pm_opp_get_opp_table() to create OPP table
opp: Reduce the size of critical section in _opp_kref_release()
PM / EM: Micro optimization in em_cpu_energy
cpufreq: arm_scmi: Discover the power scale in performance protocol
...
... instead of poking at the MSR. For that, move the accessor functions
to misc.c and add a sysfs-writing function too.
There should be no functional changes resulting from this.
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Cc: Thomas Renninger <trenn@suse.com>
Link: https://lkml.kernel.org/r/20201029190259.3476-2-bp@alien8.de
When a user tries to modify cpuidle or cpufreq properties on offline
CPUs, the tool returns success (exit status 0) but also does not provide
any warning message regarding offline cpus that may have been specified
but left unchanged. In case of all or a few CPUs being offline, it can be
difficult to keep track of which CPUs didn't get the new frequency or idle
state set. Silent failures are difficult to keep track of when there are a
huge number of CPUs on which the action is performed.
This patch adds helper functions to find both online and offline CPUs and
print them out accordingly.
We use these helper functions in cpuidle-set and cpufreq-set to print an
additional message if the user attempts to modify offline cpus.
Reported-by: Pavithra R. Prakash <pavrampu@in.ibm.com>
Signed-off-by: Brahadambal Srinivasan <latha@linux.vnet.ibm.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
- Move the AVS drivers to new platform-specific locations and get
rid of the drivers/power/avs directory (Ulf Hansson).
- Add on/off notifiers and idle state accounting support to the
generic power domains (genpd) framework (Ulf Hansson, Lina Iyer).
- Ulf will maintain the PM domain part of cpuidle-psci (Ulf Hansson).
- Make intel_idle disregard ACPI _CST if it cannot use the data
returned by that method (Mel Gorman).
- Modify intel_pstate to avoid leaving useless sysfs directory
structure behind if it cannot be registered (Chen Yu).
- Fix domain detection in the RAPL power capping driver and prevent
it from failing to enumerate the Psys RAPL domain (Zhang Rui).
- Allow acpi-cpufreq to use ACPI _PSD information with Family 19 and
later AMD chips (Wei Huang).
- Update the driver assumptions comment in intel_idle and fix a
kerneldoc comment in the runtime PM framework (Alexander Monakov,
Bean Huo).
- Avoid unnecessary resets of the cached frequency in the schedutil
cpufreq governor to reduce overhead (Wei Wang).
- Clean up the cpufreq core a bit (Viresh Kumar).
- Make assorted minor janitorial changes (Daniel Lezcano, Geert
Uytterhoeven, Hubert Jasudowicz, Tom Rix).
- Clean up and optimize the cpupower utility somewhat (Colin Ian
King, Martin Kaistra).
-----BEGIN PGP SIGNATURE-----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=TFKg
-----END PGP SIGNATURE-----
Merge tag 'pm-5.10-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"First of all, the adaptive voltage scaling (AVS) drivers go to new
platform-specific locations as planned (this part was reported to have
merge conflicts against the new arm-soc updates in linux-next).
In addition to that, there are some fixes (intel_idle, intel_pstate,
RAPL, acpi_cpufreq), the addition of on/off notifiers and idle state
accounting support to the generic power domains (genpd) code and some
janitorial changes all over.
Specifics:
- Move the AVS drivers to new platform-specific locations and get rid
of the drivers/power/avs directory (Ulf Hansson).
- Add on/off notifiers and idle state accounting support to the
generic power domains (genpd) framework (Ulf Hansson, Lina Iyer).
- Ulf will maintain the PM domain part of cpuidle-psci (Ulf Hansson).
- Make intel_idle disregard ACPI _CST if it cannot use the data
returned by that method (Mel Gorman).
- Modify intel_pstate to avoid leaving useless sysfs directory
structure behind if it cannot be registered (Chen Yu).
- Fix domain detection in the RAPL power capping driver and prevent
it from failing to enumerate the Psys RAPL domain (Zhang Rui).
- Allow acpi-cpufreq to use ACPI _PSD information with Family 19 and
later AMD chips (Wei Huang).
- Update the driver assumptions comment in intel_idle and fix a
kerneldoc comment in the runtime PM framework (Alexander Monakov,
Bean Huo).
- Avoid unnecessary resets of the cached frequency in the schedutil
cpufreq governor to reduce overhead (Wei Wang).
- Clean up the cpufreq core a bit (Viresh Kumar).
- Make assorted minor janitorial changes (Daniel Lezcano, Geert
Uytterhoeven, Hubert Jasudowicz, Tom Rix).
- Clean up and optimize the cpupower utility somewhat (Colin Ian
King, Martin Kaistra)"
* tag 'pm-5.10-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (23 commits)
PM: sleep: remove unreachable break
PM: AVS: Drop the avs directory and the corresponding Kconfig
PM: AVS: qcom-cpr: Move the driver to the qcom specific drivers
PM: runtime: Fix typo in pm_runtime_set_active() helper comment
PM: domains: Fix build error for genpd notifiers
powercap: Fix typo in Kconfig "Plance" -> "Plane"
cpufreq: schedutil: restore cached freq when next_f is not changed
acpi-cpufreq: Honor _PSD table setting on new AMD CPUs
PM: AVS: smartreflex Move driver to soc specific drivers
PM: AVS: rockchip-io: Move the driver to the rockchip specific drivers
PM: domains: enable domain idle state accounting
PM: domains: Add curly braces to delimit comment + statement block
PM: domains: Add support for PM domain on/off notifiers for genpd
powercap/intel_rapl: enumerate Psys RAPL domain together with package RAPL domain
powercap/intel_rapl: Fix domain detection
intel_idle: Ignore _CST if control cannot be taken from the platform
cpuidle: Remove pointless stub
intel_idle: mention assumption that WBINVD is not needed
MAINTAINERS: Add section for cpuidle-psci PM domain
cpufreq: intel_pstate: Delete intel_pstate sysfs if failed to register the driver
...
The variable VERSION is expanded for every use of CFLAGS. This causes
"git describe" to get called multiple times on the kernel tree, which
can be quite slow.
The git revision does not change during build, so we can use simple
variable expansion to set VERSION.
Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de>
Acked-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
There is a spelling mistake in a message. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
- Eliminate significant AML processing overhead related to using
operation regions in system memory by reworking the management
of memory mappings in the ACPI code to defer unmap operations
(to do them outside of the ACPICA locks, among other things) and
making the memory operation reagion handler avoid releasing memory
mappings created by it too early (Rafael Wysocki).
- Update the ACPICA code in the kernel to upstream revision
20200717:
* Prevent operation region reference counts from overflowing in
some cases (Erik Kaneda).
* Replace one-element array with flexible-array (Gustavo A. R.
Silva).
- Fix ACPI PCI hotplug reference counting (Rafael Wysocki).
- Drop last bits of the ACPI procfs interface (Thomas Renninger).
- Drop some redundant checks from the code parsing ACPI tables
related to NUMA (Hanjun Guo).
- Avoid redundant object evaluation in the ACPI device properties
handling code (Heikki Krogerus).
- Avoid unecessary memory overhead related to storing the signatures
of the ACPI tables recognized by the kernel (Ard Biesheuvel).
- Add missing newline characters when printing module parameter
values in some places (Xiongfeng Wang).
- Update the link to the ACPI specifications in some places (Tiezhu
Yang).
- Use the fallthrough pseudo-keyword in the ACPI code (Gustavo A. R.
Silva).
- Drop redundant variable initialization from the APEI code (Colin
Ian King).
- Drop uninitialized_var() from the ACPI PAD driver (Jason Yan).
- Replace HTTP links with HTTPS ones in the ACPI code (Alexander A.
Klimov).
-----BEGIN PGP SIGNATURE-----
iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAl8oO8gSHHJqd0Byand5
c29ja2kubmV0AAoJEILEb/54YlRx2nUP/iSRAW0DK4PYDNLDV1Q+y5RrQw44iMDf
yfLQu3agardM1KGtPuYw5zmU0UoEYtW8s2r027bxw9Hvn0IzBh5TiDvcVjMEnbVC
+6m/fWg3EStfZ9w2dxDzXDMIk/oiEZsjtWSRaDTfAIH2jc/xVcSXDojlMgBPQDu5
hIITjMbGGx783o4PNCYbIZy1ReJgd8MNQ+Xp3MCpTgbFgHMHKBOJ6B/nS8aTfilO
eE5JvzhXED7qITaXYWxI9OZpRTPTNQ3eaEPbWvnw4KJ5boMfyREMGdTBipXO+kSA
SwKhFysYEUAZM7Ffq0eTnWSCU7VWogAsTauIgs4+d9z8VrGhWi5+b6N/E/uwTKtj
HF98xtk+Loe8V24LwN0snvv51O7P5nAH47QxwIBvQssfR8ZSgdwHtUQcckybAJhx
LLmPtJrM8ZAefc9H4o0eVqumjoh1amGKC9dTY0g1j0UIE0y3ZIFHTvDNvhpTzgBk
5uUHHEiolGNWHVrs1LIMOEejqx62m+EjVc9b8XUdJqHoboTccMM73DRk/00meP/7
br/VfMI0aTjPLssvSC/ZSlTZt+ddrBm+cXw9eqruDQwdQaqxpJu+D3odjdaYSjpg
luiYQrQdoDmIDh4UNuJbvG/Hub3CLzvJSqGWLExNbX7nWXxH4HIx/8PcNtVkKZRV
qBXotIc+i4VD
=Nn2Q
-----END PGP SIGNATURE-----
Merge tag 'acpi-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These eliminate significant AML processing overhead related to using
operation regions in system memory, update the ACPICA code in the
kernel to upstream revision 20200717 (including a fix to prevent
operation region reference counts from overflowing in some cases),
remove the last bits of the (long deprecated) ACPI procfs interface
and do some assorted cleanups.
Specifics:
- Eliminate significant AML processing overhead related to using
operation regions in system memory by reworking the management of
memory mappings in the ACPI code to defer unmap operations (to do
them outside of the ACPICA locks, among other things) and making
the memory operation reagion handler avoid releasing memory
mappings created by it too early (Rafael Wysocki).
- Update the ACPICA code in the kernel to upstream revision 20200717:
* Prevent operation region reference counts from overflowing in
some cases (Erik Kaneda).
* Replace one-element array with flexible-array (Gustavo A. R.
Silva).
- Fix ACPI PCI hotplug reference counting (Rafael Wysocki).
- Drop last bits of the ACPI procfs interface (Thomas Renninger).
- Drop some redundant checks from the code parsing ACPI tables
related to NUMA (Hanjun Guo).
- Avoid redundant object evaluation in the ACPI device properties
handling code (Heikki Krogerus).
- Avoid unecessary memory overhead related to storing the signatures
of the ACPI tables recognized by the kernel (Ard Biesheuvel).
- Add missing newline characters when printing module parameter
values in some places (Xiongfeng Wang).
- Update the link to the ACPI specifications in some places (Tiezhu
Yang).
- Use the fallthrough pseudo-keyword in the ACPI code (Gustavo A. R.
Silva).
- Drop redundant variable initialization from the APEI code (Colin
Ian King).
- Drop uninitialized_var() from the ACPI PAD driver (Jason Yan).
- Replace HTTP links with HTTPS ones in the ACPI code (Alexander A.
Klimov)"
* tag 'acpi-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (22 commits)
ACPI: APEI: remove redundant assignment to variable rc
ACPI: NUMA: Remove the useless 'node >= MAX_NUMNODES' check
ACPI: NUMA: Remove the useless sub table pointer check
ACPI: tables: Remove the duplicated checks for acpi_parse_entries_array()
ACPICA: Update version to 20200717
ACPICA: Do not increment operation_region reference counts for field units
ACPICA: Replace one-element array with flexible-array
ACPI: Replace HTTP links with HTTPS ones
ACPI: Use valid link to the ACPI specification
ACPI: OSL: Clean up the removal of unused memory mappings
ACPI: OSL: Use deferred unmapping in acpi_os_unmap_iomem()
ACPI: OSL: Use deferred unmapping in acpi_os_unmap_generic_address()
ACPICA: Preserve memory opregion mappings
ACPI: OSL: Implement deferred unmapping of ACPI memory
ACPI: Use fallthrough pseudo-keyword
PCI: hotplug: ACPI: Fix context refcounting in acpiphp_grab_context()
ACPI: tables: avoid relocations for table signature array
ACPI: PAD: Eliminate usage of uninitialized_var() macro
ACPI: sysfs: add newlines when printing module parameters
ACPI: EC: add newline when printing 'ec_event_clearing' module parameter
...
Currently, acpi.info is an invalid link to access ACPI specification,
the new valid link is https://uefi.org/specifications.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Fix NULL but dereferenced coccicheck errors found by:
make coccicheck MODE=report M=tools/power/cpupower
tools/power/cpupower/lib/cpufreq.c:384:19-23: ERROR: first is NULL but dereferenced.
tools/power/cpupower/lib/cpufreq.c:440:19-23: ERROR: first is NULL but dereferenced.
tools/power/cpupower/lib/cpufreq.c:308:19-23: ERROR: first is NULL but dereferenced.
tools/power/cpupower/lib/cpufreq.c:753:19-23: ERROR: first is NULL but dereferenced.
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Building cpupower with -fno-common in CFLAGS results in errors due to
multiple definitions of the 'cpu_count' and 'start_time' variables.
./utils/idle_monitor/snb_idle.o:./utils/idle_monitor/cpupower-monitor.h:28:
multiple definition of `cpu_count';
./utils/idle_monitor/nhm_idle.o:./utils/idle_monitor/cpupower-monitor.h:28:
first defined here
...
./utils/idle_monitor/cpuidle_sysfs.o:./utils/idle_monitor/cpuidle_sysfs.c:22:
multiple definition of `start_time';
./utils/idle_monitor/amd_fam14h_idle.o:./utils/idle_monitor/amd_fam14h_idle.c:85:
first defined here
The -fno-common option will be enabled by default in GCC 10.
Bug: https://bugs.gentoo.org/707462
Signed-off-by: Mike Gilbert <floppym@gentoo.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Manpage of cpupower is listing wrong sub-commands in "See Also"
section. The option for cpupower-idle(1) should actually be
cpupower-idle-info(1) and cpupower-idle-set(1). This patch corrects
this anomaly.
Signed-off-by: Brahadambal Srinivasan <latha@linux.vnet.ibm.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Commit ae2917093f ("tools/power/cpupower: Display boost frequency
separately") modified the library function:
struct cpufreq_available_frequencies
*cpufreq_get_available_frequencies(unsigned int cpu)
to
struct cpufreq_frequencies
*cpufreq_get_frequencies(const char *type, unsigned int cpu)
This patch recovers the old API and implements the new functionality
in a newly introduce method:
struct cpufreq_boost_frequencies
*cpufreq_get_available_frequencies(unsigned int cpu)
This one should get merged into stable kernels back to 5.0 when
the above had been introduced.
Fixes: ae2917093f ("tools/power/cpupower: Display boost frequency separately")
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Based on Thomas Renninger's feedback/ideas. Re-structure the code
to better handle the per_cpu_schedule mechanism which was introduced
when adding support for AMD Zen based processors.
Signed-off-by: Janakarajan Natarajan <Janakarajan.Natarajan@amd.com>
Acked-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
AMD Zen 2 introduces the RDPRU instruction which can be used to access some
processor registers which are typically only accessible in privilege level
0. ECX specifies the register to read and EDX:EAX will contain the value read.
ECX: 0 - Register MPERF
1 - Register APERF
This has the added advantage of not having to use the msr module, since the
userspace to kernel transitions which occur during each read_msr() might
cause APERF and MPERF to go out of sync.
Signed-off-by: Janakarajan Natarajan <Janakarajan.Natarajan@amd.com>
Acked-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The per_cpu_schedule flag is used to move the cpupower process to the cpu
on which we are looking to read the APERF/MPERF registers.
This prevents IPIs from being generated by read_msr()s as we are already
on the cpu of interest.
Ex: If cpupower is running on CPU 0 and we execute
read_msr(20, MSR_APERF, val) then,
read_msr(20, MSR_MPERF, val)
the msr module will generate an IPI from CPU 0 to CPU 20 to query
for the MSR_APERF and then the MSR_MPERF in separate IPIs.
This delay, caused by IPI latency, between reading the APERF and MPERF
registers may cause both of them to go out of sync.
The use of the per_cpu_schedule flag reduces the probability of this
from happening. It comes at the cost of a negligible increase in cpu
consumption caused by the migration of cpupower across each of the
cpus of the system.
Signed-off-by: Janakarajan Natarajan <Janakarajan.Natarajan@amd.com>
Acked-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Move the needs_root variable into a sub-struct. This is in preparation
for adding a new flag for cpuidle_monitor.
Update all uses of the needs_root variable to reflect this change.
Signed-off-by: Janakarajan Natarajan <Janakarajan.Natarajan@amd.com>
Acked-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Cpupower tool has set and info options which are being used only by
x86 machines. This patch removes support for these two subcommands
from cpupower utility for POWER. Thus, these two subcommands will now be
available only for intel.
This removes the ambiguous error message while using set option in case
of using non-intel systems.
Without this patch on a POWER system:
root@ubuntu:~# cpupower info
System does not support Intel's performance bias setting
root@ubuntu:~# cpupower set -b 10
Error setting perf-bias value on CPU
With this patch on a POWER box:
root@ubuntu:~# cpupower info
Subcommand not supported on POWER
Same result for set subcommand.
This patch does not affect results on a intel box.
Signed-off-by: Abhishek Goel <huntbag@linux.vnet.ibm.com>
Acked-by: Thomas Renninger <trenn@suse.de>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
When building cpupower with clang, the following warning appears:
utils/idle_monitor/hsw_ext_idle.c:42:16: warning: initializer overrides
prior initialization of this subobject [-Winitializer-overrides]
.desc = N_("Processor Package C2"),
^~~~~~~~~~~~~~~~~~~~~~
./utils/helpers/helpers.h:25:33: note: expanded from macro 'N_'
#define N_(String) gettext_noop(String)
^~~~~~
./utils/helpers/helpers.h:23:30: note: expanded from macro
'gettext_noop'
#define gettext_noop(String) String
^~~~~~
utils/idle_monitor/hsw_ext_idle.c:41:16: note: previous initialization
is here
.desc = N_("Processor Package C9"),
^~~~~~~~~~~~~~~~~~~~~~
./utils/helpers/helpers.h:25:33: note: expanded from macro 'N_'
#define N_(String) gettext_noop(String)
^~~~~~
./utils/helpers/helpers.h:23:30: note: expanded from macro
'gettext_noop'
#define gettext_noop(String) String
^~~~~~
1 warning generated.
This appears to be a copy and paste or merge mistake because the name
and id fields both have PC9 in them, not PC2. Remove the second
assignment to fix the warning.
Fixes: 7ee767b69b ("cpupower: Add Haswell family 0x45 specific idle monitor to show PC8,9,10 states")
Link: https://github.com/ClangBuiltLinux/linux/issues/718
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Update the German translation of cpupower, and change the encoding
to UTF-8.
[skhan@linuxfoundation.org: fix merge conflicts]
Signed-off-by: Benjamin Weis <benjamin.weis@gmx.com>
Acked-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
When cross-compiling cpupower, 64bit detection is done with the host
compiler instead of the cross-compiler and libcpupower.so.0 ends up in
/usr/lib64 instead of /usr/lib for 32bit target. Fix this by moving
64bit detection after CC is defined.
Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
"git diff" says:
\ No newline at end of file
after modifying the files.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
While descending directories, Kbuild produces objects for modules,
but do not link final *.ko files; it is done in the modpost.
To keep track of modules, Kbuild creates a *.mod file in $(MODVERDIR)
for every module it is building. Some post-processing steps read the
necessary information from *.mod files. This avoids descending into
directories again. This mechanism was introduced in 2003 or so.
Later, commit 551559e13a ("kbuild: implement modules.order") added
modules.order. So, we can simply read it out to know all the modules
with directory paths. This is easier than parsing the first line of
*.mod files.
$(MODVERDIR) has a flat directory structure, that is, *.mod files
are named only with base names. This is based on the assumption that
the module name is unique across the tree. This assumption is really
fragile.
Stephen Rothwell reported a race condition caused by a module name
conflict:
https://lkml.org/lkml/2019/5/13/991
In parallel building, two different threads could write to the same
$(MODVERDIR)/*.mod simultaneously.
Non-unique module names are the source of all kind of troubles, hence
commit 3a48a91901 ("kbuild: check uniqueness of module names")
introduced a new checker script.
However, it is still fragile in the build system point of view because
this race happens before scripts/modules-check.sh is invoked. If it
happens again, the modpost will emit unclear error messages.
To fix this issue completely, create *.mod with full directory path
so that two threads never attempt to write to the same file.
$(MODVERDIR) is no longer needed.
Since modules with directory paths are listed in modules.order, Kbuild
is still able to find *.mod files without additional descending.
I also killed cmd_secanalysis; scripts/mod/sumversion.c computes MD4 hash
for modules with MODULE_VERSION(). When CONFIG_DEBUG_SECTION_MISMATCH=y,
it occurs not only in the modpost stage, but also during directory
descending, where sumversion.c may parse stale *.mod files. It would emit
'No such file or directory' warning when an object consisting a module is
renamed, or when a single-obj module is turned into a multi-obj module or
vice versa.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Nicolas Pitre <nico@fluxnic.net>
This cpupower update for Linux 5.2-rc6 consists of a fix and a minor
spelling correction.
-----BEGIN PGP SIGNATURE-----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=Om11
-----END PGP SIGNATURE-----
Merge tag 'linux-cpupower-5.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux
Pull cpupower utility updates from Shuah Khan:
"This cpupower update consists of a fix and a minor spelling correction."
* tag 'linux-cpupower-5.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux:
cpupower : frequency-set -r option misses the last cpu in related cpu list
cpupower: correct spelling of interval
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation version 2 of the license this program
is distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 100 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190529141900.918357685@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Huang Rui