Commit Graph

1898 Commits

Author SHA1 Message Date
Luca Tettamanti 43ca6cb28c hwmon: (asus_atk0110) Add quirk for Asus M5A78L
The old interface is bugged and reads the wrong sensor when retrieving
the reading for the chassis fan (it reads the CPU sensor); the new
interface works fine.

Reported-by: Göran Uddeborg <goeran@uddeborg.se>
Cc: stable@vger.kernel.org
Tested-by: Göran Uddeborg <goeran@uddeborg.se>
Signed-off-by: Luca Tettamanti <kronos.it@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2012-08-22 22:33:31 -07:00
Andi Kleen 64f503076f sections: Fix section conflicts in drivers/hwmon
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2012-08-18 16:17:43 -07:00
Linus Torvalds 76159c20c0 Merge branch 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging
Pull a howmon update from Jean Delvare.

* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  hwmon: struct x86_cpu_id arrays can be __initconst
2012-07-30 10:10:26 -07:00
Jan Beulich e273bd98c9 hwmon: struct x86_cpu_id arrays can be __initconst
... as being referenced from __init code only.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-07-30 11:33:00 +02:00
Henrik Rydberg 829917cd72 hwmon: (applesmc) Decode and act on read/write status codes
The behavior of the SMC has changed several times over the years,
causing read failures in the driver. It seems the problem can be
explained by a shift in SMC speed combined with improper action on
status codes.

We should first wait for the SMC to settle, which was the most
frequent response on the old slow machines. Then, if the SMC is busy,
we need to try again later by resending the command. This was the most
likely response until 2012. Now, with a shorter wait time, we are
again most likely to poll while the SMC is settling, and as a result
we see high failure rates on many old and new models.

With the distinction between busy and failure, we can also wait longer
before retrying, without sacrificing speed.  This seems to bring
failures down to virtually zero on all models.

Tested on: MBA1,1 MBA3,1 MBA5,1 MBA5,2 MBP9,2

Tested-by: Adam Somerville <adamsomerville@gmail.com>
Tested-by: Hubert Eichner <hubert.georg.eichner@gmail.com>
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2012-07-27 14:00:12 -07:00
Jean Delvare 5953e2761b hwmon: (jc42) Don't reset hysteresis on device removal
Restoring the configuration register on device removal has the side
effect of also resetting the hysteresis value. This is inconsistent as
the other limits are not reset, only hysteresis. So, following the
principle of least surprise, preserve the hysteresis value when
restoring the configuration register.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2012-07-27 13:59:22 -07:00
Jean Delvare 2ccc8731e5 hwmon: (jc42) Simplify hysteresis mask
Define JC42_CFG_HYST_MASK as the mask _before_ shifting instead of
after shifting. This simplifies the current code slightly, and will
simplify the code to come even more.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2012-07-27 13:59:22 -07:00
Guenter Roeck 9baeb8fdd7 hwmon: (acpi_power_meter) Fix build warning
Commit c5dec01822 (acpi_power_meter: Use struct
dev_pm_ops for power management) introduced the following build warning. It is
seen if CONFIG_PM_SLEEP is not defined.

acpi_power_meter.c:930:12: warning: acpi_power_meter_resume defined but not used

Fix it.

Cc: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-07-27 13:59:13 -07:00
Linus Torvalds d14b7a419a Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull trivial tree from Jiri Kosina:
 "Trivial updates all over the place as usual."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (29 commits)
  Fix typo in include/linux/clk.h .
  pci: hotplug: Fix typo in pci
  iommu: Fix typo in iommu
  video: Fix typo in drivers/video
  Documentation: Add newline at end-of-file to files lacking one
  arm,unicore32: Remove obsolete "select MISC_DEVICES"
  module.c: spelling s/postition/position/g
  cpufreq: Fix typo in cpufreq driver
  trivial: typo in comment in mksysmap
  mach-omap2: Fix typo in debug message and comment
  scsi: aha152x: Fix sparse warning and make printing pointer address more portable.
  Change email address for Steve Glendinning
  Btrfs: fix typo in convert_extent_bit
  via: Remove bogus if check
  netprio_cgroup.c: fix comment typo
  backlight: fix memory leak on obscure error path
  Documentation: asus-laptop.txt references an obsolete Kconfig item
  Documentation: ManagementStyle: fixed typo
  mm/vmscan: cleanup comment error in balance_pgdat
  mm: cleanup on the comments of zone_reclaim_stat
  ...
2012-07-24 13:34:56 -07:00
Linus Torvalds 0cd5ff591a New drivers for DA9052/53 PMIC as well as HIH-6130/HIH-6131 humidity and
temperature sensors.
 
 Convert drivers to use devm_ functions and to use dev_pm_ops.
 Address a couple of Coverity errors/warnings as well as compile warnings.
 Some functional improvements in applesmc driver.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJQDMjFAAoJEMsfJm/On5mBQy0QAIOMh+xxhfpIYmOz6e7lXyGK
 IvsYvJ16jvMzkIHxIsCJ8lYo0tQJTVFZAoDE0KnXMt/vpDGuooa/L2Rq0NQwAadF
 nb+XijtV042FMScLiGCbJQRyPmVWEpQ1sHvf6Ob+xUido4xTL/J0ObMv1P76Ro5v
 OlCWqt5bly9JDDzwTdvmkmVQ7TSLV27IbEy1XFeQ3B9AquIzCsHjLXmyzTGtWuEa
 e73pR62m+nEHlIwEyCnH9QBc5fhUyrOm+mzmGWaEZX+PUt4OC2VeBCOB4tyYA1f+
 +PV9wcCsFyre4Xdi2mtfyMnqSs6qio07diJB33oAmApKs6dbsfZvwM1gSIVTp8W/
 RooxePKN2fFgjnLSbAQZWaC3AMTcrsMlUMVxqZ75BPmQvrm1bxJh/OcWpo5lZM8s
 yAmdx587eHABMqvYgs4QVIf3QqmPXi194Qzq4loLHteGDohK8Z6u6t7famx1sRLt
 ApqfmcxPAjvpXfQB11VboYTLiFtXJK8T/VwOOoB9L24/dxoymSUa2UQuoeSBdESM
 dTTKJQebUcJs6J0OWzGRjKwS/jH8wcGJCzMlcHW9dpxMdh98R4gHHi/UTkfgJi/n
 j50/oxpJCyHqGthvKyA77oztWyyfuAdJbG2eKtRNVPriJMP3uuAbbBA9Cl9ytXyh
 SUChQ49urUSABI9up1iR
 =TcQ+
 -----END PGP SIGNATURE-----

Merge tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon updates from Guenter Roeck:
 "New drivers for DA9052/53 PMIC as well as HIH-6130/HIH-6131 humidity
  and temperature sensors.

  Convert drivers to use devm_ functions and to use dev_pm_ops.  Address
  a couple of Coverity errors/warnings as well as compile warnings.
  Some functional improvements in applesmc driver."

* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (72 commits)
  hwmon: (applesmc) Ignore some temperature registers
  hwmon: (applesmc) Allow negative temperature values
  hwmon: (s3c-hwmon) Use devm_kzalloc instead of kzalloc
  hwmon: (w83781d) Fix compile warning
  hwmon: (applesmc) Shorten minimum wait time
  hwmon: (exynos4_tmu) Use struct dev_pm_ops for power management
  hwmon: (gpio-fan) Use struct dev_pm_ops for power management
  hwmon: (abituguru3) Use struct dev_pm_ops for power management
  hwmon: (abituguru) Use struct dev_pm_ops for power management
  hwmon: (acpi_power_meter) Fix unintentional integer overflow
  hwmon: (acpi_power_meter) Cleanup and optimizations
  hwmon: Honeywell Humidicon HIH-6130/HIH-6131 humidity and temperature sensor driver
  hwmon: (applesmc) Skip sensor mapping
  hwmon: (ntc_thermistor) Ensure that data->name string is terminated
  hwmon: (w83l785ts) Convert to use devm_ functions
  hwmon: (w83l785ts) Simplify code and improve readability
  hwmon: (smsc47m192) Convert to use devm_ functions
  hwmon: (smsc47m1) Convert to use devm_ functions
  hwmon: (smsc47b397) Convert to use devm_ functions
  hwmon: (k8temp) Convert to use devm_ functions
  ...
2012-07-24 13:29:18 -07:00
Linus Torvalds 5b160bd426 Merge branch 'x86-mce-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86/mce changes from Ingo Molnar:
 "This tree improves the AMD thresholding bank code and includes a
  memory fault signal handling fixlet."

* 'x86-mce-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mce: Fix siginfo_t->si_addr value for non-recoverable memory faults
  x86, MCE, AMD: Update copyrights and boilerplate
  x86, MCE, AMD: Give proper names to the thresholding banks
  x86, MCE, AMD: Make error_count read only
  x86, MCE, AMD: Cleanup reading of error_count
  x86, MCE, AMD: Print decimal thresholding values
  x86, MCE, AMD: Move shared bank to node descriptor
  x86, MCE, AMD: Remove local_allocate_... wrapper
  x86, MCE, AMD: Remove shared banks sysfs linking
  x86, amd_nb: Export model 0x10 and later PCI id
2012-07-22 16:07:45 -07:00
Henrik Rydberg e30bca1257 hwmon: (applesmc) Ignore some temperature registers
Not all sensors in the T range are useful temperatures.  This patch
creates a subset of sensors to be exported to userland, excluding the
unknown types.

Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2012-07-21 21:48:45 -07:00
Henrik Rydberg b6e5122f09 hwmon: (applesmc) Allow negative temperature values
There are many userland reports of sensors with unreasonably small and
large temperatures. There seem to be several reasons for this:

Firstly, the major sensor type (sp78) is actually a signed number.
This explains why some sensors show very small or large values - they
are in fact all small, but of different sign.

Secondly, the other sensor type (1-hex) is not properly understood; it
may be that it is not a temperature after all.

Thirdly, some sensors are differential in nature, showing changes over
time rather than absolute numbers.  This explains why those values are
small and of varying sign.

This patch interprets the sp78 type as signed short, but keeps the
original scaling. For other types, -EINVAL is returned, since the
nature of those sensors is unknown.

Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2012-07-21 21:48:45 -07:00
Sachin Kamat 41bf870e6d hwmon: (s3c-hwmon) Use devm_kzalloc instead of kzalloc
This makes the code simpler as explicit freeing is not needed.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2012-07-21 21:48:45 -07:00
Guenter Roeck bbc8a569ae hwmon: (w83781d) Fix compile warning
The following compile warning may be seen if the driver is compiled with
-Wuninitialized:

drivers/hwmon/w83781d.c: warning: 'sc_addr[1]' may be used uninitialized in this
function [-Wuninitialized]

While this is a false positive, it is annoying in nightly builds, and may help
to conceal real problems. The current code is quite tricky, and and it is easy
to rearrage the code to make the warning disappear. So fix it.

Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2012-07-21 21:48:45 -07:00
Henrik Rydberg a332bf9a65 hwmon: (applesmc) Shorten minimum wait time
The 2012 series of MacBooks have a faster SMC, and the current driver
timings do not work at all. Tests show that decreasing the minimum
wait time, from 64 us to 16 us, works well. Since this is still larger
than the original minimum of 10 us used before 2008, there is nothing
inherently problematic with changing it. The fail frequency on older
machines seems to increase slightly, but not enough to be noticeable.

Tested on MBA11, MBA31, MBA5,2, MBP9,2.

The patch was originally written by adamski99 (ubuntuforums.org) and
later tested by janhouse (bbs.archlinux.org).

Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2012-07-21 21:48:45 -07:00
Rafael J. Wysocki 08cd6753d9 hwmon: (exynos4_tmu) Use struct dev_pm_ops for power management
Make the Exynos4 TMU driver define its PM callbacks through
a struct dev_pm_ops object rather than by using legacy PM hooks
in struct platform_driver.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
[linux@roeck-us.net: CONFIG_PM->CONFIG_PM_SLEEP, and remove unnecessary ()]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2012-07-21 21:48:44 -07:00
Rafael J. Wysocki 6d20a6c060 hwmon: (gpio-fan) Use struct dev_pm_ops for power management
Make the gpio-fan driver define its PM callbacks through
a struct dev_pm_ops object rather than by using legacy PM hooks
in struct platform_driver.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
[linux@roeck-us.net: CONFIG_PM->CONFIG_PM_SLEEP, and remove unnecessary ()]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2012-07-21 21:48:44 -07:00
Rafael J. Wysocki c248f24cff hwmon: (abituguru3) Use struct dev_pm_ops for power management
Make the Abit uGuru rev. 3 driver define its PM callbacks through
a struct dev_pm_ops object rather than by using legacy PM hooks
in struct platform_driver.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
[linux@roeck-us.net: CONFIG_PM->CONFIG_PM_SLEEP, and remove unnecessary ()]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2012-07-21 21:48:44 -07:00
Rafael J. Wysocki 4f0928c665 hwmon: (abituguru) Use struct dev_pm_ops for power management
Make the Abit uGuru driver define its PM callbacks through
a struct dev_pm_ops object rather than by using legacy PM hooks
in struct platform_driver.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
[linux@roeck-us.net: CONFIG_PM->CONFIG_PM_SLEEP, and remove unnecessary ()]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2012-07-21 21:48:44 -07:00
Guenter Roeck 75311bea56 hwmon: (acpi_power_meter) Fix unintentional integer overflow
Expression with two integer variables is calculated as integer before it is
converted to u64. This may result in an integer overflow. Fix by declaring
trip point variables as s64 instead of int.

This patch addresses Coverity #200596: Unintentional integer overflow.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Jean Delvare <khali@linux-fr.org>
2012-07-21 21:48:44 -07:00
Guenter Roeck 27c4db3996 hwmon: (acpi_power_meter) Cleanup and optimizations
An unsigned value can not be smaller than 0. Remove the check for it.
Use DIV_ROUND_CLOSEST for divide operations converting milli-degrees C into
degrees C. Limit maximum accepted trip point temperature to INT_MAX.

This patch fixes Coverity #115214: Unsigned compared against 0

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Jean Delvare <khali@linux-fr.org>
2012-07-21 21:48:44 -07:00
Iain Paton 27f8b13555 hwmon: Honeywell Humidicon HIH-6130/HIH-6131 humidity and temperature sensor driver
This is a new driver for the Honeywell Humidicon HIH-6130/HIH-6131 humidity sensor.

The driver is based on the existing Sensiron sht21 driver with the necessary changes
to the probe, update_measurements and conversion functions necessary to use the
Honeywell sensors.

There's no difference between the 6130 & 6131 other than the 6131 having an external
condensation filter attached.

Signed-off-by: Iain Paton <ipaton0@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2012-07-21 21:48:44 -07:00
Henrik Rydberg edf48f3a73 hwmon: (applesmc) Skip sensor mapping
The special motion sensor mapping is unnecessary; remove it.

Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2012-07-21 21:48:44 -07:00
Guenter Roeck 0ef63e48f0 hwmon: (ntc_thermistor) Ensure that data->name string is terminated
Fix Coverity warning: Calling strncpy with a maximum size argument of 20 bytes
on destination array "data->name" of size 20 bytes might leave the destination
string unterminated.

Fix by replacing strncpy() with strlcpy() and by using sizeof() to determine
the maximum string length.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Jean Delvare <khali@linux-fr.org>
2012-07-21 21:48:44 -07:00
Guenter Roeck e2730bea0b hwmon: (w83l785ts) Convert to use devm_ functions
Convert to use devm_ functions to reduce code size and simplify the code.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Jean Delvare <khali@linux-fr.org>
2012-07-21 21:48:43 -07:00
Guenter Roeck f187fc040b hwmon: (w83l785ts) Simplify code and improve readability
In probe function, rename new_client variable to client, and introduce
local variable dev to point to client->dev, to simplify the code and
improve readability.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Jean Delvare <khali@linux-fr.org>
2012-07-21 21:48:43 -07:00
Guenter Roeck 2625996b75 hwmon: (smsc47m192) Convert to use devm_ functions
Convert to use devm_ functions to reduce code size and simplify the code.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Jean Delvare <khali@linux-fr.org>
2012-07-21 21:48:43 -07:00
Guenter Roeck 08ad7c9522 hwmon: (smsc47m1) Convert to use devm_ functions
Convert to use devm_ functions to reduce code size and simplify the code.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Jean Delvare <khali@linux-fr.org>
2012-07-21 21:48:43 -07:00
Guenter Roeck e43d5fefa7 hwmon: (smsc47b397) Convert to use devm_ functions
Convert to use devm_ functions to reduce code size and simplify the code.

Cc: Mark M. Hoffman <mhoffman@lightlink.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Jean Delvare <khali@linux-fr.org>
2012-07-21 21:48:43 -07:00
Guenter Roeck a0d44cbcc0 hwmon: (k8temp) Convert to use devm_ functions
Convert to use devm_ functions to reduce code size and simplify the code.

Cc: Rudolf Marek <r.marek@assembler.cz>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Jean Delvare <khali@linux-fr.org>
2012-07-21 21:48:43 -07:00
Guenter Roeck 6e13bb06f6 hwmon: (w83791d) Convert to use devm_ functions
Convert to use devm_ functions to reduce code size and simplify the code.

Cc: Marc Hulsman <m.hulsman@tudelft.nl>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Jean Delvare <khali@linux-fr.org>
2012-07-21 21:48:43 -07:00
Guenter Roeck 140849e105 hwmon: (w83792d) Convert to use devm_ functions
Convert to use devm_ functions to reduce code size and simplify the code.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Jean Delvare <khali@linux-fr.org>
2012-07-21 21:48:43 -07:00
Guenter Roeck 144d2b9985 hwmon: (w83781d) Convert to use devm_ functions
Convert to use devm_ functions to reduce code size and simplify the code.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Jean Delvare <khali@linux-fr.org>
2012-07-21 21:48:43 -07:00
Guenter Roeck 0cf4699721 hwmon: (w83627hf) Convert to use devm_ functions
Convert to use devm_ functions to reduce code size and simplify the code.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Jean Delvare <khali@linux-fr.org>
2012-07-21 21:48:42 -07:00
Guenter Roeck 84269edce7 hwmon: (vt1211) Convert to use devm_ functions
Convert to use devm_ functions to reduce code size and simplify the code.

Cc: Juerg Haefliger <juergh@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Jean Delvare <khali@linux-fr.org>
2012-07-21 21:48:42 -07:00
Guenter Roeck fd55bc009a hwmon: (via686a) Convert to use devm_ functions
Convert to use devm_ functions to reduce code size and simplify the code.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Jean Delvare <khali@linux-fr.org>
2012-07-21 21:48:42 -07:00
Guenter Roeck f625e0fd51 hwmon: (tmp421) Convert to use devm_ functions
Convert to use devm_ functions to reduce code size and simplify the code.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Jean Delvare <khali@linux-fr.org>
2012-07-21 21:48:42 -07:00
Guenter Roeck 0df9fc7bb8 hwmon: (tmp401) Convert to use devm_ functions
Convert to use devm_ functions to reduce code size and simplify the code.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Jean Delvare <khali@linux-fr.org>
2012-07-21 21:48:42 -07:00
Guenter Roeck f511a21f4e hwmon: (tmp102) Convert to use devm_ functions
Convert to use devm_ functions to reduce code size and simplify the code.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Jean Delvare <khali@linux-fr.org>
2012-07-21 21:48:42 -07:00
Guenter Roeck bd91d3bab8 hwmon: (thmc50) Convert to use devm_ functions
Convert to use devm_ functions to reduce code size and simplify the code.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Jean Delvare <khali@linux-fr.org>
2012-07-21 21:48:42 -07:00
Guenter Roeck 5d224ade31 hwmon: (sis5595) Convert to use devm_ functions
Convert to use devm_ functions to reduce code size and simplify the code.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Jean Delvare <khali@linux-fr.org>
2012-07-21 21:48:42 -07:00
Guenter Roeck 5e0c876920 hwmon: (pc87427) Convert to use devm_ functions
Convert to use devm_ functions to reduce code size and simplify the code.

Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Jean Delvare <khali@linux-fr.org>
2012-07-21 21:48:41 -07:00
Guenter Roeck d00985f3dd hwmon: (gpio-fan) Convert to use devm_ functions
Convert to use devm_ functions to reduce code size and simplify the code.

Cc: Simon Guinot <sguinot@lacie.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Simon Guinot <sguinot@lacie.com>
2012-07-21 21:48:41 -07:00
Guenter Roeck 60c2b56975 hwmon: (pcf8591) Convert to use devm_ functions
Convert to use devm_ functions to reduce code size and simplify the code.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Jean Delvare <khali@linux-fr.org>
2012-07-21 21:48:41 -07:00
Guenter Roeck 96f316c24c hwmon: (max6642) Convert to use devm_ functions
Convert to use devm_ functions to reduce code size and simplify the code.

Cc: Per Dalen <per.dalen@appeartv.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Jean Delvare <khali@linux-fr.org>
2012-07-21 21:48:41 -07:00
Guenter Roeck 215690a4f1 hwmon: (max1619) Convert to use devm_ functions
Convert to use devm_ functions to reduce code size and simplify the code.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Jean Delvare <khali@linux-fr.org>
2012-07-21 21:48:41 -07:00
Guenter Roeck 661f020f56 hwmon: (max1111) Convert to use devm_ functions
Convert to use devm_ functions to reduce code size and simplify the code.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Jean Delvare <khali@linux-fr.org>
2012-07-21 21:48:41 -07:00
Guenter Roeck 4a8ad25af5 hwmon: (lm93) Convert to use devm_ functions
Convert to use devm_ functions to reduce code size and simplify the code.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Jean Delvare <khali@linux-fr.org>
2012-07-21 21:48:41 -07:00
Guenter Roeck 705375cc41 hwmon: (lm92) Convert to use devm_ functions
Convert to use devm_ functions to reduce code size and simplify the code.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Jean Delvare <khali@linux-fr.org>
2012-07-21 21:48:41 -07:00