At some boards, it has no ethernet support. As an alternative, we can use
USB Ethernet card to support NFS (u-boot supports it too). It supports
AXIS cards which are used most frequently.
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The driver for Micrel PHYs is required for the Apalis iMX6 module
plugged into a Ixora carrier board featuring an on-module Micrel
KSZ9031 Gigabit PHY.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The GPIO-based bitbanging I2C driver is required to make HDMI work on
the Apalis iMX6 module plugged into a Ixora carrier board featuring a
DDC channel to read a screen's EDID being hooked up to regular GPIOs.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The rv4168 RTC is used by the following platforms:
- Nitrogen6_MAX (both Quad and Quad Plus versions)
- Nitrogen7
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
I2C muxing is used on Nitrogen6_MAX board from Boundary Devices.
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Those two touch controllers are used by Boundary Devices platforms.
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enable configuration options useful for Vybrid:
- NFC NAND driver
- USB dual-role controller support
- FTM PWM driver
- DSPI SPI driver
- Colibri VF50 Touchscreen support.
Beside that, enable useful configurations such as IIO hwmon support
(used in i.MX 23/28, patch pending for Vybrid), PWM LED support and
CPU idle support.
Regenerated config using savedefconfig (which removes some configs
which are now enabled by default).
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Select the sahara crypto driver that is used on i.MX53.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This has been stable on i.MX6 for a good while now and there is no
reason to keep it disabled, as it allows to allocate non-shared
IRQs if several PCIe devices are connected to a single host.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Select CONFIG_DRM_DW_HDMI_AHB_AUDIO so that we have HDMI audio
supported by default.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The vf610 adc driver is present on Vybrid, MX6SX, MX6UL and MX7D.
Select it by default.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Fugang Duan <B38611@freescale.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
imx_v6_v7_defconfig is not suitable for booting LS1021 as it needs
LPAE.
Remove this option.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
CONFIG_VMSPLIT_2G was added to mx5_defconfig by commit 06965c39b4
("ARM i.MX5: update defconfig") to fix an issue where mx53 was not
detecting the full 1GiB memory range.
However, as explained by Russell King [1] the correct fix is to select
CONFIG_HIGHMEM.
imx_v6_v7_deconfig inherited such option from mx5_defconfig.
As imx_v6_v7_deconfig has CONFIG_HIGHMEM=y, we should no longer
select such non-standard CONFIG_VMSPLIT_2G option.
[1] http://www.spinics.net/lists/arm-kernel/msg137839.html
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
We mostly keep defconfigs updates on a separate branch due to their tendency
to conflict between platforms and this encourages more careful separation of
code changes and config changes.
Most updates here are minor tweaks, enabling new drivers for various platforms,
and so on. Renesas also removed one defconfig (marzen_defconfig).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=rsmT
-----END PGP SIGNATURE-----
Merge tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC defconfig updates from Olof Johansson:
"We mostly keep defconfigs updates on a separate branch due to their
tendency to conflict between platforms and this encourages more
careful separation of code changes and config changes.
Most updates here are minor tweaks, enabling new drivers for various
platforms, and so on. Renesas also removed one defconfig
(marzen_defconfig)"
* tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (44 commits)
ARM: add TC2 PM support to multi_v7_defconfig
ARM: tegra: Update multi_v7_defconfig
ARM: tegra: Update default configuration
ARM: at91/defconfig: at91_dt: remove ARM_AT91_ETHER
ARM: at91/defconfig: at91_dt: enable DRM hlcdc support
ARM: at91: at91_dt_defconfig: enable ISI and ov2640 support
ARM: multi_v7_defconfig: Enable Allwinner P2WI, PWM, DMA_SUN6I, cryptodev
ARM: sunxi_defconfig: Enable DMA_SUN6I, P2WI, PWM, cryptodev, EXTCON, FHANDLE
ARM: shmobile: Enable fixed voltage regulator in shmobile_defconfig
ARM: multi_v7_defconfig: Select MX6UL and MX7D
ARM: prima2_defconfig: enable build for hwspinlock
ARM: prima2_defconfig: enable build for RTC
ARM: prima2_defconfig: enable build for misc input
ARM: prima2_defconfig: enable build for SiRFSoC SDHC host
ARM: prima2_defconfig: fix the outdated defconfig
ARM: imx_v6_v7_defconfig: Select CONFIG_IKCONFIG_PROC
ARM: defconfig: orion5x: add DT support
ARM: qcom_defconfig: Enable options for KS8851 ethernet
ARM: multi_v7_defconfig: Enable support for PWM Regulators
ARM: multi_v7_defconfig: Enable ST's PWM driver
...
It is useful to know how the kernel was configured via:
zcat /proc/config.gz ,so select the CONFIG_IKCONFIG_PROC option.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
build in snvs powerkey
build in syscon power off support
Signed-off-by: Frank Li <Frank.Li@freescale.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The old warp board revision had hardware issues that prevented
the RTS/CTS lines to work with the Bluetooth module.
Tha latest rev1.12 fixes this problem, so now we should better use
CONFIG_BT_HCIUART_H4 instead, as it provides a better throughput than
the CONFIG_BT_HCIUART_3WIRE option.
Suggested-by: Arthur Lambert <arthur@dreem.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
APF6 Dual and Quad SoM have an wl1271 wifi/bt chip. This chip needs
CONFIG_BT_HCIUART_LL.
APF6Dev carrier board has a SX8654 I2C touchscreen controller.
Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
RTC PCF8523 is used on some mx6 cubox-i boards.
Let it work by default.
Reported-by: Rick Thomas <rbthomas@cube.rcthomas.org>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
It is used for max7310 gpio expandor which is used at imx6qdl
sabreauto board.
Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
USB Ethernet function at host mode
USB Media function(webcam) at host mode
USB Audio function at host mode
USB Serial function at host mode
USB EHSET driver at host mode (for OTG & EH Certification test)
Several USB Gadget functions:
- Configfs
- NCM
- Zero (used for test)
- Gadgetfs
- Serial
Above functions are built as module.
Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
CONFIG_FB_MXS is the LCD driver for mx6solo-lite and mx6solox.
Enable it by default.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
SPI_FSL_QUADSPI can be used by Vybrid and mx6sx, so select it by default.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Add POWER_RESET_SYSCON since Vybrid SoC's now make use of this
driver to provide software reset capabilities through the SRC
module.
Also regenerated using savedefconfig which removed the config
BACKLIGHT_LCD_SUPPORT which is now selected by default since
commit 9c8ee3c734 ("video: mx3fb: always enable
BACKLIGHT_LCD_SUPPORT").
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Having switched over all of the users of CONFIG_PM_RUNTIME to use
CONFIG_PM directly, turn the latter into a user-selectable option
and drop the former entirely from the tree.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Kevin Hilman <khilman@linaro.org>
This is a collection of the various changes to defconfig files,
most importantly enabling some additional platforms in the
multi_v7_defconfig file. These are split out into a separate
branch to avoid most of the merge conflicts in the defconfig
files.
This also touches 12 other defconfig files for shmobile,
at91, hisilicon, keystone, mvebu, omap, and tegra.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=brXv
-----END PGP SIGNATURE-----
Merge tag 'defconfig-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC defconfig changes from Arnd Bergmann:
"This is a collection of the various changes to defconfig files, most
importantly enabling some additional platforms in the
multi_v7_defconfig file. These are split out into a separate branch
to avoid most of the merge conflicts in the defconfig files.
This also touches 12 other defconfig files for shmobile, at91,
hisilicon, keystone, mvebu, omap, and tegra"
* tag 'defconfig-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (36 commits)
ARM: omap2plus_defconfig: enable ECAP and EHRPWM
ARM: omap2plus_defconfig: enable XHCI
ARM: omap2plus_defconfig: enable AM33XX SoC sound
ARM: omap2plus_defconfig: enable EDT FT5X06 touchscreen
ARM: omap2plus_defconfig: remove unwanted ethernet drivers
ARM: multi_v7_defconfig: enable MAX77686 PMIC drivers for exynos4412-prime based SoCs
ARM: at91/defconfig: add DM9000 to at91_dt
ARM: at91/defconfig: add QT1070 to at91_dt
ARM: at91/defconfig: add TCB PWM driver selection
ARM: at91/defconfig: add the XDMA driver
ARM: at91: sama5: update defconfig
ARM: defconfig: imx_v6_v7_defconfig updates
ARM: multi_v7_defconfig: add driver support for hix5hd2
ARM: exynos_defconfig: Use 16 minors per MMC block device
ARM: mvebu: add MTD_BLOCK to mvebu_v7_defconfig
ARM: mvebu: enable i2c device in mvebu_v7_defconfig
ARM: mvebu: re-enable SDHCI driver for Armada 38x SoC in v7 defconfig
ARM: tegra: Regenerate default configuration
ARM: multi_v7_defconfig: Enable cgroups
ARM: multi_v7_defconfig: Enable Broadcom Cygnus
...
This is a squash of several imx_v6_v7_defconfig update patches.
- Enable tlv320aic3x audio codec by default (Phytec PBAB01 board)
- Enable DS1307 rtc and gpio fan by default (TBS2910 board)
- Select thermal related drivers
- Add SNVS power off driver
Signed-off-by: Dmitry Lavnikevich <d.lavnikevich@sam-solutions.com>
Signed-off-by: Soeren Moch <smoch@web.de>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Robin Gong <b38343@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Since 64546e9fe3 ("ARM: imx_v6_v7_defconfig updates") and commit
0650f855d2 ("ARM: imx_v4_v5_defconfig: Select CONFIG_IMX_WEIM") CONFIG_SPI
selection was dropped by savedefconfig for imx_v4_v5_defconfig and
imx_v6_v7_defconfig.
In order to keep the same behaviour as previous kernel versions and avoid
regressions, let's add CONFIG_SPI option back.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
The rtc isl1208 driver is used by mx6 nitrogen board, so let's enable it by
default.
The fsl sai driver is used by the vf610-twr board, so let's enable it by
default.
simple-audio-card driver is used by the vf610-twr board, so let's enable it by
default.
Generated this patch by doing:
- make imx_v6_v7_defconfig
- make menuconfig and manually select options
- make savedefconfig
- cp defconfig arch/arm/configs/imx_v6_v7_defconfig
,which results in some additional cleanups.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Add EDMA for DMA support for Vybrid SoCs. Also add printk time.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Enable STMPE gpio support as this is used on MX6 Data Modul edm-qmx6
board.
Signed-off-by: Silvio Fricke <silvio.fricke@gmail.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
CONFIG_FHANDLE=y is needed when running systemd with version >=210, so that it
can spawn a serial tty via getty.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Since i.MX51 becomes DT only now, we can drop option MACH_IMX51_DT and
just use SOC_IMX51 instead. While at it, rename imx51-dt.c to
mach-imx51.c to align with the name schema of other IMX DT only
platforms.
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Since commit 39b9004d1f (gpu: ipu-v3: Move i.MX IPUv3 core driver out of
staging) the ipuv3 core driver is no longer built bey default.
Select CONFIG_IMX_IPUV3_CORE so that the core ipuv3 code can be built again.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
eukrea_mbimxsd51-baseboard.c and mach-cpuimx51sd.c can be replaced with their
devicetree equivalents: imx51-eukrea-mbimxsd51-baseboard.dts and
imx51-eukrea-cpuimx51.dtsi respectively, so remove the board files.
This allows the conversion of mx51 to a devicetree-only platform.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Reviewed-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
These defconfigs contain the CONFIG_M25P80 symbol, which is now
dependent on the MTD_SPI_NOR symbol. Add CONFIG_MTD_SPI_NOR to satisfy
the new dependency.
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Diego Dorta