Commit Graph

21 Commits

Author SHA1 Message Date
Matthew Wilcox 80dc3e062a [SCSI] Add Brownie 1200U3P to blacklist
The Brownie 1200U3P has the same problem with REPORT LUNS as the
1600U3P.  Add it to the blacklist.

Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-14 18:58:37 -05:00
Ed Lin e0b2e597d5 [SCSI] stex: fix id mapping issue
The correct internal mapping of stex controllers should be:
id:0~15, lun:0~7 (st_shasta)
id:0, lun:0~127 (st_yosemite)
id:0~127, lun:0 (st_vsc and st_vsc1)

This patch reports the internal mapping to scsi mid layer,  eliminating
the translation between scsi mid layer and firmware. To achieve this
goal, we also need to:
-- fail the REPORT_LUNS command for st_shasta because the
   firmware is known to not report all actual luns
-- add an entry in scsi_devindo.c to force sequential lun scan
   (for st_shasta controllers)
-- fail the REPORT_LUNS command for console device
-- remove special handling of REPORT_LUNS command for
   st_yosemite, as there is no translation mapping now

Signed-off-by: Ed Lin <ed.lin@promise.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-16 12:40:21 -04:00
Mike Christie f70cfa9bef [SCSI] scsi_devinfo: scsi2 HP and Hitachi entries
When SCSI-2 they can support luns past 7 and sparse luns.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-10-01 15:09:19 -05:00
Mike Christie 12427d9948 [SCSI] scsi_devinfo: add nec iStorage
support the report luns opcode
.
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-10-01 15:08:41 -05:00
Mike Christie 5f619c5ba5 [SCSI] scsi_devinfo: add Tornado
This is from RHEL4. I do not have any info from our bugzilla. All
I could find was something like this thread
http://lkml.org/lkml/2005/1/7/346

Report lun for linux does not work. It may be our lun format code or
it may be the device. It is probably not worth it to add anything
special for this device, so the patch just adds BLIST_NOREPORTLUN.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-10-01 15:07:57 -05:00
Mike Christie 3441afc672 [SCSI] scsi_devinfo: add EMC Invista
This is from RHEL4. This box can support
scsi2 and can also support BLIST_SPARSELUN | BLIST_LARGELUN.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-10-01 15:07:11 -05:00
Hannes Reinecke 9ba0883cfc [SCSI] HP XP devinfo update
According to Anthony Cheung all HP XP arrays with "OPEN-" 
types support REPORT_LUN. So there is no reason why we
shouldn't use it.

Signed-off-by: Anthony Cheung <anthony.cheung@hp.com>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-26 09:30:00 -05:00
James Bottomley f0cd91a68a Merge ../linux-2.6 2006-06-10 13:47:26 -05:00
Thomas Bogendoerfer c3d8336855 [SCSI] Blacklist entry for HP dat changer
after upgrading our SUN E250 from 2.4 to 2.6 I'm seeing following error
when the HP DDS4 DAT changer gets probed:

scsi: host 1 channel 0 id 5 lun16777216 has a LUN larger than allowed by
the host adapter

The device is connected to a symbios 875 host. I've talked to Willy
about the problem, and he asked me to try to blacklist the device
for reportlun. I did that with the patch below and it solved the
problem. It now gets properly detected:

 target1:0:5: FAST-20 WIDE SCSI 40.0 MB/s ST (50 ns, offset 16)
  Vendor: HP        Model: C5713A            Rev: H307
  Type:   Sequential-Access                  ANSI SCSI revision: 03
 target1:0:5: Beginning Domain Validation
 target1:0:5: FAST-20 SCSI 20.0 MB/s ST (50 ns, offset 16)
 target1:0:5: FAST-20 WIDE SCSI 40.0 MB/s ST (50 ns, offset 16)
 target1:0:5: Domain Validation skipping write tests
 target1:0:5: Ending Domain Validation
  Vendor: HP        Model: C5713A            Rev: H307
  Type:   Medium Changer                     ANSI SCSI revision: 03

Signed-off-by: tsbogend@alpha.franken.de
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-05-19 16:41:20 -05:00
Brian King f2536cbd12 [SCSI] scsi: Add IBM 2104-DU3 to blist
Some versions of the IBM 2104-DU3 disk enclosure
have been observed to hang Inquiries to non zero
LUNs to the SES device. This device only has LUN 0,
so this patch adds it to the BLIST to prevent scsi
core from scanning beyond LUN 0.

Signed-off-by: Brian King <brking@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-27 13:59:05 -05:00
James Bottomley 84d891d672 Merge ../scsi-rc-fixes-2.6
Conflicts:

	include/scsi/scsi_devinfo.h

Same number for two BLIST flags:  BLIST_MAX_512 and BLIST_ATTACH_PQ3

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-14 15:47:45 -05:00
Kurt Garloff 13f7e5acc8 [SCSI] BLIST_ATTACH_PQ3 flags
Some devices report a peripheral qualifier of 3 for LUN 0; with the original
code, we would still try a REPORT_LUNS scan (if SCSI level is >= 3 or if we
have the BLIST_REPORTLUNS2 passed in), but NOT any sequential scan.
Also, the device at LUN 0 (which is not connected according to the PQ) is not
registered with the OS.

Unfortunately, SANs exist that are SCSI-2 and do NOT support REPORT_LUNS, but
report a unknown device with PQ 3 on LUN 0. We still need to scan them, and
most probably we even need BLIST_SPARSELUN (and BLIST_LARGELUN). See the bug
reference for an infamous example.

This is patch 3/3:
3. Implement the blacklist flag BLIST_ATTACH_PQ3 that makes the scsi
   scanning code register PQ3 devices and continues scanning; only sg
   will attach thanks to scsi_bus_match().

Signed-off-by: Kurt Garloff <garloff@suse.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-14 13:56:56 -05:00
James Bottomley 4d7db04a7a [SCSI] add SCSI_UNKNOWN and LUN transfer limit restrictions
Original From: Ingo Flaschberger <if@xip.at>

To support the RA4100 array from Compaq.

This patch now correctly handles SCSI_UNKNOWN types with regard to
BLIST_REPORTLUNS2 (allow it) and cdb[1] LUN inclusion (don't).

It also allows a BLIST_MAX_512 flag to restrict the maximum transfer
length to 512 blocks (apparently this is an RA4100 problem).

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-13 10:13:31 -05:00
Matthew Wilcox 98acfc7e8e [SCSI] Add Brownie to blacklist
This device spews total rubbish to a REPORT LUNS command, so avoid
sending it one.

Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-02 22:44:06 -06:00
James Bottomley 7f23e146a1 [SCSI] correct some dropped const compiler warnings
Make the vendor, model and rev fields in scsi_device pointers to const
and update a few prototypes of functions using them.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-12-13 18:12:05 -07:00
Karl Magnus Kolstoe f4fd20bf31 [SCSI] 2.6.13.3; add Pioneer DRM-624x to drivers/scsi/scsi_devinfo.c
The patch below should make the Pioneer DRM-624X automatically
be set up with all 6 "drives". (6 slot SCSI CD changer)

Signed-off-by: Karl Magnus Kolstø <karl.kolsto@uib.no>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-17 12:24:04 -04:00
James Bottomley 1c5363153d [SCSI] blacklist REPORT LUNS usage on transtec arrays
They report being SCSI-3 but seem to give back rubbish to a
REPORT_LUNS command.  Force them to be sequentially scanned.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-13 09:52:19 -05:00
Anton Blanchard 4869040512 [SCSI] Universal Xport no attach blacklist
On Fri, Dec 13, 2002 at 12:24:39AM +1100, Anton Blanchard wrote:

> We tested 2.5.51 on a ppc64 box, qlogic 2312 and a fastt700 array. I
> had CONFIG_SCSI_REPORT_LUNS and unfortunately it thought the management
> LUN was a disk:
>
>   Vendor: IBM       Model: Universal Xport   Rev: 0520
>   Type:   Direct-Access                      ANSI SCSI revision: 03
>
> ...
>
> SCSI device sdaj: drive cache: write through
> SCSI device sdaj: 40960 512-byte hdwr sectors (21 MB)
>  sdaj: unknown partition table
> Attached scsi disk sdaj at scsi2, channel 0, id 0, lun 31
>
> ...
>
> end_request: I/O error, dev sdaj, sector 0

Three years later...

It looks like SGI use the same FC vendor and they already have a
workaround for this issue. The following patch adds the IBM version of
it.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-06 17:23:43 -05:00
James Bottomley 507caac75e [SCSI] Make the HSG80 a REPORTLUN2 device
From: 	Steve Wilcox <spwilcox@att.com>

In order to properly report LUN's > 7, the DEC HSG80 definition in
scsi_devinfo.c needs to include BLIST_REPORTLUN2 rather than
BLIST_SPARSELUN.  I've tested this change with several HSG firmware
revisions and with both Emulex and Qlogic HBA's.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-12 11:40:50 -05:00
Dave Jones 0d7323c865 [SCSI] blacklist addition.
When run on a kernel that scans all LUNs, a certain crappy
scsi scanner reports the same LUN over and over..
https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=155457

Aparently they were so shamed by this, they chose to remain
anonymous. Though it seems the blacklist code handles
anonymous vendors just fine.

Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-08 18:08:45 -05:00
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00