Commit Graph

46 Commits

Author SHA1 Message Date
Kuninori Morimoto c718aff2e6 sh: ms7724: Correct sh-eth EEPROM polling timeout.
This converts the cpu_relax() to a udelay(1), which fixes up issues with
the EEPROM polling occasionally timing out.

Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-18 20:47:15 +09:00
Roel Kluin 204fc390d8 sh: Fix test of unsigned in se7722_irq_demux()
se7722_fpga_irq[] is unsigned so the test does not work.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-12-16 13:26:53 +09:00
Kuninori Morimoto 9f815a1765 sh: ms7724se: Add ak4642 support
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-12-15 12:07:37 +09:00
Linus Torvalds 3a43aaa317 Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (137 commits)
  sh: include empty zero page in romImage
  sh: Make associative cache writes fatal on all SH-4A parts.
  sh: Drop associative writes for SH-4 cache flushes.
  sh: Partial revert of copy/clear_user_highpage() optimizations.
  sh: Add default uImage rule for se7724, ap325rxa, and migor.
  sh: allow runtime pm without suspend/resume callbacks
  sh: mach-ecovec24: Remove un-defined settings for VPU
  sh: mach-ecovec24: LCDC drive ability become high
  sh: fix sh7724 VEU3F resource size
  serial: sh-sci: Fix too early port disabling.
  sh: pfc: pr_info() -> pr_debug() cleanups.
  sh: pfc: Convert from ctrl_xxx() to __raw_xxx() I/O routines.
  sh: Improve kfr2r09 serial port setup code
  sh: Break out SuperH PFC code
  sh: Move KEYSC header file
  sh: convert /proc/cpu/aligmnent, /proc/cpu/kernel_alignment to seq_file
  sh: Add CPG save/restore code for sh7724 R-standby
  sh: Add SDHI power control support to Ecovec
  mfd: Add power control platform data to SDHI driver
  sh: mach-ecovec24: modify address map
  ...
2009-12-09 19:03:16 -08:00
Kuninori Morimoto d53bd80cb3 sh: ms7724se: Add runtime PM support for FSI
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-11-30 12:56:44 +00:00
Magnus Damm fc1d003de3 sh: Move KEYSC header file
This patch moves the KEYSC header file from the
SuperH specific asm directory to a place where
it can be shared by multiple architectures.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-11-30 12:02:51 +09:00
Paul Mundt a37c6c7aec sh: mach-se: Convert SE7722 FPGA to dynamic IRQ allocation.
This gets rid of the arbitrary set of vectors used by the SE7722 FPGA
interrupt controller and witches over to a completely dynamic set.
No assumptions regarding a contiguous range are made, and the platform
resources themselves need to be filled in lazily.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-11-04 11:44:21 +09:00
Magnus Damm 3b9f2952a3 sh: Add ms7724se specific memory pre/post sleep code
Add self-refresh handling code for the MS7724SE board.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-30 11:59:26 +09:00
Magnus Damm 5b380ec11d sh: add SDHI1 support to ms7724se
Add support for cn8 and SDHI1 to the ms7724se board.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-28 09:18:24 +09:00
Magnus Damm 8013cc9a5d sh: mac address through private data for sh_eth on ms7724se
Convert the ms7724se board code to pass the mac
address to the sh_eth driver using platform data.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-28 09:18:24 +09:00
Magnus Damm 0f79af6009 sh: SDHI platform data to the SE7724 board
Add SD Card support to the se7724 board using the
sh_mobile_sdhi driver hooked up to SDHI0 and CN7.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-26 10:37:05 +09:00
Kuninori Morimoto 3e9ad52b95 sh: add FSI driver support for ms7724se
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-25 11:04:36 +09:00
Phil Edworthy a6f15ade97 video: sh_mobile_lcdcfb: use both register sets for display panning
Switch to using both register sets - side A and side B for display panning.

Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-15 21:08:22 +09:00
Paul Mundt c3144fc46f Merge branches 'sh/hwblk' and 'sh/pm-runtime' 2009-08-23 18:04:07 +09:00
Magnus Damm f8f8c0797d sh: add r8a66597 usb1 gadget to the se7724 board
Add USB gadget support for port CN26 on the Solution Engine 7724
board. The r8a66597-udc driver is hooked up as a platform device
and some registers are configured to enable the USB in gadget mode.
The hardware driving the USB port is the on-chip USB1 block in
the sh7724 processor configured as USB gadget controller.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-20 10:32:18 +09:00
Kuninori Morimoto 1bc265d06c sh: USB0 resource area fix for ms7724se
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-19 19:28:40 +09:00
Paul Mundt 4b6b987969 Merge branch 'master' into sh/hwblk 2009-08-15 13:00:02 +09:00
Paul Mundt 60e0a4c7ad Merge branch 'sh/stable-updates' 2009-08-15 12:59:42 +09:00
Magnus Damm 9747e78b30 sh: use in-soc KEYSC on se7724
This patch updates the Solution Engine 7724 board code to use
in-SoC KEYSC resources for the keyboard platform device. Using
the in-SoC key scan controller fixes a crash-during-resume issue.

Without this patch the KEYSC hardware block located in the board
specific FPGA is used together with an external IRQ which is
routed through the FPGA and handled by some board specific demux
code. This board specific FPGA interrupt code does not implement
desc->set_wake() so the enable_irq_wake() call in the sh_keysc
driver will fail at suspend-to-ram time and the disable_irq_wake()
will bomb out when resuming.

Changing the platform data to use the in-SoC KEYSC hardware makes
the se7724 board support code less special which is a good thing.
Also, the board specific KEYSC pin setup code selects in-SoC pin
functions already which makes the current FPGA platform device data
look like a typo.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-15 12:58:47 +09:00
Magnus Damm 7766e16bee sh: LED9, LED10 and LED11 support for Solution Engine 7724
This patch adds support for LED9, LED10 and LED11 on
the Solution Engine 7724 board. If CONFIG_PM is enabled
then these LEDs are used to show the hardware sleep
mode used by the processor. Useful to debug cpuidle.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-07 03:55:38 +09:00
Magnus Damm df47cd096c sh: Runtime PM pdev hwblk - Solution Engine 7724
Add hwblk_id to Solution Engine 7724 board specific
on-chip sh7724 platform devices.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-04 15:06:13 +09:00
Magnus Damm 66d9c51ac4 sh: Runtime PM pdev hwblk - Solution Engine 7722
Add hwblk_id to Solution Engine 7722 board specific
on-chip sh7722 platform devices.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-04 15:05:58 +09:00
Kuninori Morimoto 4f3243117a sh: ms7724se: add 1280x720 lcdc output support
There was no big meaning in the support of SVGA,
but 720p support is necessary for ms7724se board.
So, this patch support 720p instead of SVGA.

Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-04 14:41:22 +09:00
Magnus Damm 719a72b7c7 usb: r8a66597-hcd platform data on_chip support
Convert the r8a66597-hcd driver to use the on_chip flag
from platform data to enable on chip behaviour instead
of relying on CONFIG_SUPERH_ON_CHIP_R8A66597 ugliness.

This makes the code cleaner and also allows us to support
both external and internal r8a66597 with the same kernel.

It also makes the Kconfig part more future proof since
we with this patch can add support for new processors
with on-chip r8a66597 without modifying the Kconfig.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-07-20 04:27:10 +09:00
Magnus Damm 9731f4a202 sh: add r8a66597 usb0 host to the se7724 board
Add USB host support for port CN27 on the Solution Engine 7724
board. The r8a66597-hcd driver is hooked up as a platform device
and some registers are configured to enable the USB host function.
The hardware driving the USB port is the on-chip USB0 block in
the sh7724 processor configured as USB host controller.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-07-05 00:23:56 +09:00
Magnus Damm 84f7597c11 sh: fix se7724 ceu names
Use "ceu0" and "ceu1" as CEU names instead of "ceu".
This fixes "memchunk" kernel command line selection
on the solution engine 7724 board.

With this patch applied use "memchunk.ceu0=1m" or
"memchunk.ceu1=1m" on kernel command line to override
physically memory size to one meg for CEU0 or CEU1.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-07-01 15:31:29 +09:00
Joe Perches 9a660a6e1a arch/sh/boards/mach-se/7206/io.c: Remove unnecessary semicolons
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-29 16:35:09 +09:00
Kuninori Morimoto a80cad950f sh: ms7724se: Add sh_eth support
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-26 16:24:02 +09:00
Huang Weiyi 78c99ba1b1 sh: pci: remove duplicated #include's
Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-14 17:48:43 +09:00
Kuninori Morimoto 287c129716 sh: Add ms7724se (SH7724) board support
This adds preliminary support for the ms7724se solution engine board.

Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-26 17:01:47 +09:00
Paul Mundt 2d5efc190e sh: pci: Move the se7751 fixups in to arch/sh/drivers/pci/.
The se7751 was still doing the PCI fixups in its own board directory,
so we move it over to arch/sh/drivers/pci/ with the rest of the board
fixups. It has bitrotted significantly over the years, so will still
likely need a bit of work to bring back up to date.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-20 21:42:59 +09:00
Paul Mundt c563bf0965 sh: pci: Kill off dead references to is_pci_ioaddr and friends.
Some old boards are still using this in their I/O routines, kill it off.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-20 19:39:57 +09:00
Paul Mundt a3c0e0d003 sh: pci: Consolidate pcibios_align_resource() definitions.
This introduces a saner pcibios_align_resource() that can be used
regardless of whether pci-auto or pci-new are being used, and
consolidates it in pci-lib.c.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-20 16:14:29 +09:00
Paul Mundt 4c7a47de89 sh: pci: Kill off platform-specific multi-window mappings.
Commit 68b42d1b54 ("sh: sh7785lcr: Map
whole PCI address space.") changed around the semantics of how various
chip-selects are made accessible to PCI. Now that there is a single
large mapping covering from CS0-CS6, there is no longer any need to
do multi-window mapping. Subsequently, all of the differing
implementations can be consolidated in to pci-sh7780.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-17 17:21:36 +09:00
Paul Mundt b627b4ed3d sh: pci: Move se7780 INTC fixups out of pci-sh7780.c.
These fixups belong in the board INTC setup code, not in the middle of
pci-sh7780.c.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-17 13:00:18 +09:00
Paul Mundt 073da9c0de sh: Kill off cf-enabler with extreme prejudice.
Now that the rest of the boards that were using cf-enabler "generically"
have switched to setting up their mappings on their own, only the mach-se
boards were left using it. All of the cf-enabler using mach-se boards
use a special initialization of the MRSHPC windows rather than going
through the special PTE as other SH-4 platforms do. This consolidates
the MRSHPC setup logic, hooks it up on the boards that care, and gets rid
of any and all remaining references to cf-enabler.

This has been long overdue, as cf-enabler has been the bane of
arch/sh/kernel for the last 7 years. Good riddance.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:44:46 +09:00
Magnus Damm 21c601bb2e sh: remove ioport cruft and smc91x from se7343
Remove out-of-date se7343 ioport code including some old support
for unknown-ne2000-pcmcia-card, cf-over-pcmcia and a mysterical
smc91x that once must have been on a special daughterboard.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:43:51 +09:00
Magnus Damm 5e5aacb0de sh: add isp1161 usb host device to se7343
Add isp1161 platform data to get usb host working on se7343.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:43:51 +09:00
Magnus Damm 6aacba72db sh: add st16c2550 devices to se7343
Add 8250 platform data to setup the ST16C2550C chip on se7343.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:43:51 +09:00
Magnus Damm 5727003b5d sh: fix number of interrupts on se7343
Fix to make sure that the on-board interrupt sources are included
in the interrupt count on se7343.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:43:51 +09:00
Magnus Damm 090d951b69 sh: sh_mobile keysc clock framework support
Add clock framework support to the sh_mobile keysc driver and
adjust the board specific code accordingly.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:42:51 +09:00
Huang Weiyi c48e64ae57 arch/sh/boards/mach-se/7343/irq.c: removed duplicated #include
Removed duplicated include <linux/irq.h> in
arch/sh/boards/mach-se/7343/irq.c.

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-08-03 23:29:24 +09:00
Paul Mundt c8b5d9dcbc sh: Move out individual boards without mach groups.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-30 00:13:39 +09:00
Paul Mundt 0764bff445 sh: More header path fixups for mach dir refactoring.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-29 22:10:01 +09:00
Paul Mundt 939a24a6df sh: Move out the solution engine headers to arch/sh/include/mach-se/
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-29 21:41:37 +09:00
Paul Mundt da2014a2b0 sh: Shuffle the board directories in to mach groups.
This flattens out the board directories in to individual mach groups,
we will use this for getting rid of unneeded directories, simplifying
the build system, and becoming more coherent with the refactored
arch/sh/include topology.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-29 21:01:19 +09:00