The commit 99b5c5bb9a ("ALSA: hda - Remove the use of set_fs()")
converted the get_kctl_0dB_offset() call for killing set_fs() usage in
HD-audio codec code. The conversion assumed that the TLV callback
used in HD-audio code is only snd_hda_mixer_amp() and applies the TLV
calculation locally.
Although this assumption is correct, and all slave kctls are actually
with that callback, the current code is still utterly buggy; it
doesn't hit this condition and falls back to the next check. It's
because the function gets called after adding slave kctls to vmaster.
By assigning a slave kctl, the slave kctl object is faked inside
vmaster code, and the whole kctl ops are overridden. Thus the
callback op points to a different value from what we've assumed.
More badly, as reported by the KERNEXEC and UDEREF features of PaX,
the code flow turns into the unexpected pitfall. The next fallback
check is SNDRV_CTL_ELEM_ACCESS_TLV_READ access bit, and this always
hits for each kctl with TLV. Then it evaluates the callback function
pointer wrongly as if it were a TLV array. Although currently its
side-effect is fairly limited, this incorrect reference may lead to an
unpleasant result.
For addressing the regression, this patch introduces a new helper to
vmaster code, snd_ctl_apply_vmaster_slaves(). This works similarly
like the existing map_slaves() in hda_codec.c: it loops over the slave
list of the given master, and applies the given function to each
slave. Then the initializer function receives the right kctl object
and we can compare the correct pointer instead of the faked one.
Also, for catching the similar breakage in future, give an error
message when the unexpected TLV callback is found and bail out
immediately.
Fixes: 99b5c5bb9a ("ALSA: hda - Remove the use of set_fs()")
Reported-by: PaX Team <pageexec@freemail.hu>
Cc: <stable@vger.kernel.org> # v4.13
Signed-off-by: Takashi Iwai <tiwai@suse.de>
While converting the error messages to the standard macros in the
commit 4e76a8833f ("ALSA: hda - Replace with standard printk"), a
superfluous '-' slipped in the code mistakenly. Its influence is
almost negligible, merely shows a dB value as negative integer instead
of positive integer (or vice versa) in the rare error message.
So let's kill this embarrassing byte to show more correct value.
Fixes: 4e76a8833f ("ALSA: hda - Replace with standard printk")
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The loop in snd_hdac_bus_parse_capabilities() may go to nirvana when
it hits an invalid register value read:
BUG: unable to handle kernel paging request at ffffad5dc41f3fff
IP: pci_azx_readl+0x5/0x10 [snd_hda_intel]
Call Trace:
snd_hdac_bus_parse_capabilities+0x3c/0x1f0 [snd_hda_core]
azx_probe_continue+0x7d5/0x940 [snd_hda_intel]
.....
This happened on a new Intel machine, and we need to check the value
and abort the loop accordingly.
[Note: the fixes tag below indicates only the commit where this patch
can be applied; the original problem was introduced even before that
commit]
Fixes: 6720b38420 ("ALSA: hda - move bus_parse_capabilities to core")
Cc: <stable@vger.kernel.org>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The 'use' locking macros are no-ops if neither SMP or SND_DEBUG is
enabled. This might once have been OK in non-preemptible
configurations, but even in that case snd_seq_read() may sleep while
relying on a 'use' lock. So always use the proper implementations.
Cc: stable@vger.kernel.org
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add native DSD support quirk for Pro-Ject Pre Box S2 Digital USB id
2772:0230.
Signed-off-by: Jussi Laako <jussi@sonarnerd.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
caiaq driver doesn't kill the URB properly at its error path during
the probe, which may lead to a use-after-free error later. This patch
addresses it.
Reported-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Johan Hovold <johan@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There is a potential race window opened at creating and deleting a
port via ioctl, as spotted by fuzzing. snd_seq_create_port() creates
a port object and returns its pointer, but it doesn't take the
refcount, thus it can be deleted immediately by another thread.
Meanwhile, snd_seq_ioctl_create_port() still calls the function
snd_seq_system_client_ev_port_start() with the created port object
that is being deleted, and this triggers use-after-free like:
BUG: KASAN: use-after-free in snd_seq_ioctl_create_port+0x504/0x630 [snd_seq] at addr ffff8801f2241cb1
=============================================================================
BUG kmalloc-512 (Tainted: G B ): kasan: bad access detected
-----------------------------------------------------------------------------
INFO: Allocated in snd_seq_create_port+0x94/0x9b0 [snd_seq] age=1 cpu=3 pid=4511
___slab_alloc+0x425/0x460
__slab_alloc+0x20/0x40
kmem_cache_alloc_trace+0x150/0x190
snd_seq_create_port+0x94/0x9b0 [snd_seq]
snd_seq_ioctl_create_port+0xd1/0x630 [snd_seq]
snd_seq_do_ioctl+0x11c/0x190 [snd_seq]
snd_seq_ioctl+0x40/0x80 [snd_seq]
do_vfs_ioctl+0x54b/0xda0
SyS_ioctl+0x79/0x90
entry_SYSCALL_64_fastpath+0x16/0x75
INFO: Freed in port_delete+0x136/0x1a0 [snd_seq] age=1 cpu=2 pid=4717
__slab_free+0x204/0x310
kfree+0x15f/0x180
port_delete+0x136/0x1a0 [snd_seq]
snd_seq_delete_port+0x235/0x350 [snd_seq]
snd_seq_ioctl_delete_port+0xc8/0x180 [snd_seq]
snd_seq_do_ioctl+0x11c/0x190 [snd_seq]
snd_seq_ioctl+0x40/0x80 [snd_seq]
do_vfs_ioctl+0x54b/0xda0
SyS_ioctl+0x79/0x90
entry_SYSCALL_64_fastpath+0x16/0x75
Call Trace:
[<ffffffff81b03781>] dump_stack+0x63/0x82
[<ffffffff81531b3b>] print_trailer+0xfb/0x160
[<ffffffff81536db4>] object_err+0x34/0x40
[<ffffffff815392d3>] kasan_report.part.2+0x223/0x520
[<ffffffffa07aadf4>] ? snd_seq_ioctl_create_port+0x504/0x630 [snd_seq]
[<ffffffff815395fe>] __asan_report_load1_noabort+0x2e/0x30
[<ffffffffa07aadf4>] snd_seq_ioctl_create_port+0x504/0x630 [snd_seq]
[<ffffffffa07aa8f0>] ? snd_seq_ioctl_delete_port+0x180/0x180 [snd_seq]
[<ffffffff8136be50>] ? taskstats_exit+0xbc0/0xbc0
[<ffffffffa07abc5c>] snd_seq_do_ioctl+0x11c/0x190 [snd_seq]
[<ffffffffa07abd10>] snd_seq_ioctl+0x40/0x80 [snd_seq]
[<ffffffff8136d433>] ? acct_account_cputime+0x63/0x80
[<ffffffff815b515b>] do_vfs_ioctl+0x54b/0xda0
.....
We may fix this in a few different ways, and in this patch, it's fixed
simply by taking the refcount properly at snd_seq_create_port() and
letting the caller unref the object after use. Also, there is another
potential use-after-free by sprintf() call in snd_seq_create_port(),
and this is moved inside the lock.
This fix covers CVE-2017-15265.
Reported-and-tested-by: Michael23 Yu <ycqzsy@gmail.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
USB-audio driver may leave a stray URB for the mixer interrupt when it
exits by some error during probe. This leads to a use-after-free
error as spotted by syzkaller like:
==================================================================
BUG: KASAN: use-after-free in snd_usb_mixer_interrupt+0x604/0x6f0
Call Trace:
<IRQ>
__dump_stack lib/dump_stack.c:16
dump_stack+0x292/0x395 lib/dump_stack.c:52
print_address_description+0x78/0x280 mm/kasan/report.c:252
kasan_report_error mm/kasan/report.c:351
kasan_report+0x23d/0x350 mm/kasan/report.c:409
__asan_report_load8_noabort+0x19/0x20 mm/kasan/report.c:430
snd_usb_mixer_interrupt+0x604/0x6f0 sound/usb/mixer.c:2490
__usb_hcd_giveback_urb+0x2e0/0x650 drivers/usb/core/hcd.c:1779
....
Allocated by task 1484:
save_stack_trace+0x1b/0x20 arch/x86/kernel/stacktrace.c:59
save_stack+0x43/0xd0 mm/kasan/kasan.c:447
set_track mm/kasan/kasan.c:459
kasan_kmalloc+0xad/0xe0 mm/kasan/kasan.c:551
kmem_cache_alloc_trace+0x11e/0x2d0 mm/slub.c:2772
kmalloc ./include/linux/slab.h:493
kzalloc ./include/linux/slab.h:666
snd_usb_create_mixer+0x145/0x1010 sound/usb/mixer.c:2540
create_standard_mixer_quirk+0x58/0x80 sound/usb/quirks.c:516
snd_usb_create_quirk+0x92/0x100 sound/usb/quirks.c:560
create_composite_quirk+0x1c4/0x3e0 sound/usb/quirks.c:59
snd_usb_create_quirk+0x92/0x100 sound/usb/quirks.c:560
usb_audio_probe+0x1040/0x2c10 sound/usb/card.c:618
....
Freed by task 1484:
save_stack_trace+0x1b/0x20 arch/x86/kernel/stacktrace.c:59
save_stack+0x43/0xd0 mm/kasan/kasan.c:447
set_track mm/kasan/kasan.c:459
kasan_slab_free+0x72/0xc0 mm/kasan/kasan.c:524
slab_free_hook mm/slub.c:1390
slab_free_freelist_hook mm/slub.c:1412
slab_free mm/slub.c:2988
kfree+0xf6/0x2f0 mm/slub.c:3919
snd_usb_mixer_free+0x11a/0x160 sound/usb/mixer.c:2244
snd_usb_mixer_dev_free+0x36/0x50 sound/usb/mixer.c:2250
__snd_device_free+0x1ff/0x380 sound/core/device.c:91
snd_device_free_all+0x8f/0xe0 sound/core/device.c:244
snd_card_do_free sound/core/init.c:461
release_card_device+0x47/0x170 sound/core/init.c:181
device_release+0x13f/0x210 drivers/base/core.c:814
....
Actually such a URB is killed properly at disconnection when the
device gets probed successfully, and what we need is to apply it for
the error-path, too.
In this patch, we apply snd_usb_mixer_disconnect() at releasing.
Also introduce a new flag, disconnected, to struct usb_mixer_interface
for not performing the disconnection procedure twice.
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
While line6_probe() may kick off URB for a control MIDI endpoint, the
function doesn't clean up it properly at its error path. This results
in a leftover URB action that is eventually triggered later and causes
an Oops like:
general protection fault: 0000 [#1] PREEMPT SMP KASAN
CPU: 1 PID: 0 Comm: swapper/1 Not tainted
RIP: 0010:usb_fill_bulk_urb ./include/linux/usb.h:1619
RIP: 0010:line6_start_listen+0x3fe/0x9e0 sound/usb/line6/driver.c:76
Call Trace:
<IRQ>
line6_data_received+0x1f7/0x470 sound/usb/line6/driver.c:326
__usb_hcd_giveback_urb+0x2e0/0x650 drivers/usb/core/hcd.c:1779
usb_hcd_giveback_urb+0x337/0x420 drivers/usb/core/hcd.c:1845
dummy_timer+0xba9/0x39f0 drivers/usb/gadget/udc/dummy_hcd.c:1965
call_timer_fn+0x2a2/0x940 kernel/time/timer.c:1281
....
Since the whole clean-up procedure is done in line6_disconnect()
callback, we can simply call it in the error path instead of
open-coding the whole again. It'll fix such an issue automagically.
The bug was spotted by syzkaller.
Fixes: eedd0e95d3 ("ALSA: line6: Don't forget to call driver's destructor at error path")
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When podhd_init() failed with the acquiring a ctrl i/f, the line6
helper still calls the disconnect callback that eventually calls again
usb_driver_release_interface() with the NULL intf.
Put the proper NULL check before calling it for avoiding an Oops.
Fixes: fc90172ba2 ("ALSA: line6: Claim pod x3 usb data interface")
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The error path in podhd_init() tries to clear the pending timer, while
the timer object is initialized at the end of init sequence, thus it
may hit the uninitialized object, as spotted by syzkaller:
INFO: trying to register non-static key.
the code is fine but needs lockdep annotation.
turning off the locking correctness validator.
CPU: 1 PID: 1845 Comm: kworker/1:2 Not tainted
4.14.0-rc2-42613-g1488251d1a98 #238
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
Workqueue: usb_hub_wq hub_event
Call Trace:
__dump_stack lib/dump_stack.c:16
dump_stack+0x292/0x395 lib/dump_stack.c:52
register_lock_class+0x6c4/0x1a00 kernel/locking/lockdep.c:769
__lock_acquire+0x27e/0x4550 kernel/locking/lockdep.c:3385
lock_acquire+0x259/0x620 kernel/locking/lockdep.c:4002
del_timer_sync+0x12c/0x280 kernel/time/timer.c:1237
podhd_disconnect+0x8c/0x160 sound/usb/line6/podhd.c:299
line6_probe+0x844/0x1310 sound/usb/line6/driver.c:783
podhd_probe+0x64/0x70 sound/usb/line6/podhd.c:474
....
For addressing it, assure the initializations of timer and work by
moving them to the beginning of podhd_init().
Fixes: 790869dacc ("ALSA: line6: Add support for POD X3")
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The event handler in the virmidi sequencer code takes a read-lock for
the linked list traverse, while it's calling snd_seq_dump_var_event()
in the loop. The latter function may expand the user-space data
depending on the event type. It eventually invokes copy_from_user(),
which might be a potential dead-lock.
The sequencer core guarantees that the user-space data is passed only
with atomic=0 argument, but snd_virmidi_dev_receive_event() ignores it
and always takes read-lock(). For avoiding the problem above, this
patch introduces rwsem for non-atomic case, while keeping rwlock for
atomic case.
Also while we're at it: the superfluous irq flags is dropped in
snd_virmidi_input_open().
Reported-by: Jia-Ju Bai <baijiaju1990@163.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Like other Plantronics devices, P610 does not support sample
rate reading. Apply sample rate quirk to it.
BugLink: https://bugs.launchpad.net/bugs/1719853
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A collection of small fixes, mostly with stable ones:
- X32 ABI fix for PCM;
likely not so many people suffer from it, but still better to fix
- Two minor kernel warning fixes on USB audio devices spotted by
syzkaller
- Regression fix of echoaudio due to its inconsistent dimension
- Fix for HBR support on Intel DP audio, on some recent chips
- USB-audio quirk for yet another Plantronics devices
- Fix for potential double-fetch in ASIHPI FIFO queue
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=uVz7
-----END PGP SIGNATURE-----
Merge tag 'sound-4.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes, mostly with stable ones:
- X32 ABI fix for PCM; likely not so many people suffer from it, but
still better to fix
- Two minor kernel warning fixes on USB audio devices spotted by
syzkaller
- Regression fix of echoaudio due to its inconsistent dimension
- Fix for HBR support on Intel DP audio, on some recent chips
- USB-audio quirk for yet another Plantronics devices
- Fix for potential double-fetch in ASIHPI FIFO queue"
* tag 'sound-4.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: usx2y: Suppress kernel warning at page allocation failures
Revert "ALSA: echoaudio: purge contradictions between dimension matrix members and total number of members"
ALSA: usb-audio: Check out-of-bounds access by corrupted buffer descriptor
ALSA: pcm: Fix structure definition for X32 ABI
ALSA: usb-audio: Add sample rate quirk for Plantronics C310/C520-M
ALSA: hda - program ICT bits to support HBR audio
ALSA: asihpi: fix a potential double-fetch bug when copying puhm
ALSA: compress: Remove unused variable
The usx2y driver allocates the stream read/write buffers in continuous
pages depending on the stream setup, and this may spew the kernel
warning messages with a stack trace like:
WARNING: CPU: 1 PID: 1846 at mm/page_alloc.c:3883
__alloc_pages_slowpath+0x1ef2/0x2d70
Modules linked in:
CPU: 1 PID: 1846 Comm: kworker/1:2 Not tainted
....
It may confuse user as if it were any serious error, although this is
no fatal error and the driver handles the error case gracefully.
Since the driver has already some sanity check of the given size (128
and 256 pages), it can't pass any crazy value. So it's merely page
fragmentation.
This patch adds __GFP_NOWARN to each caller for suppressing such
kernel warnings. The original issue was spotted by syzkaller.
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This reverts commit 275353bb68 to fix a regression which can abort
'alsactl' program in alsa-utils due to assertion in alsa-lib.
alsactl: control.c:2513: snd_ctl_elem_value_get_integer: Assertion `idx < sizeof(obj->value.integer.value) / sizeof(obj->value.integer.value[0])' failed.
alsactl: control.c:2976: snd_ctl_elem_value_get_integer: Assertion `idx < ARRAY_SIZE(obj->value.integer.value)' failed.
This commit is a band-aid. In a point of usage of ALSA control interface,
the drivers still bring an issue that they prevent userspace applications
to have a consistent way to parse each levels of the dimension information
via ALSA control interface.
Let me investigate this issue. Current implementation of the drivers
have three control element sets with dimension information:
* 'Monitor Mixer Volume' (type: integer)
* 'VMixer Volume' (type: integer)
* 'VU-meters' (type: boolean)
Although the number of elements named as 'Monitor Mixer Volume' differs
depending on drivers in this group, it can be calculated by macros
defined by each driver (= (BX_NUM - BX_ANALOG_IN) * BX_ANALOG_IN). Each
of the elements has one member for value and has dimension information
with 2 levels (= BX_ANALOG_IN * (BX_NUM - BX_ANALOG_IN)). For these
elements, userspace applications are expected to handle the dimension
information so that all of the elements construct a matrix where the
number of rows and columns are represented by the dimension information.
The same way is applied to elements named as 'VMixer Volume'. The number
of these elements can also be calculated by macros defined by each
drivers (= PX_ANALOG_IN * BX_ANALOG_IN). Each of the element has one
member for value and has dimension information with 2 levels
(= BX_ANALOG_IN * PX_ANALOG_IN). All of the elements construct a matrix
with the dimension information.
An element named as 'VU-meters' gets a different way in a point of
dimension information. The element includes 96 members for value. The
element has dimension information with 3 levels (= 3 or 2 * 16 * 2). For
this element, userspace applications are expected to handle the dimension
information so that all of the members for value construct a matrix
where the number of rows and columns are represented by the dimension
information. This is different from the way for the former.
As a summary, the drivers were not designed to produce a consistent way to
parse the dimension information. This makes it hard for general userspace
applications such as amixer to parse the information by a consistent way,
and actually no userspace applications except for 'echomixer' utilize the
dimension information. Additionally, no drivers excluding this group use
the information.
The reverted commit was written based on the latter way. A commit
860c1994a7 ('ALSA: control: add dimension validator for userspace
elements') is written based on the latter way, too. The patch should be
reconsider too in the same time to re-define a consistent way to parse the
dimension information.
Reported-by: Mark Hills <mark@xwax.org>
Reported-by: S. Christian Collins <s.chriscollins@gmail.com>
Fixes: 275353bb68 ('ALSA: echoaudio: purge contradictions between dimension matrix members and total number of members')
Cc: <stable@vger.kernel.org> # v4.8+
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
X32 ABI uses the 64bit timespec in addition to 64bit alignment of 64bit
values. We have added compat ABI for these ioctls, but this patch adds
one missing padding into 'struct snd_pcm_mmap_status_x32' to fix
incompatibilities.
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Like other Plantronics devices, C310 and C520-M do not support sample
rate reading. Add them to the sample rate quirk accordingly.
BugLink: https://bugs.launchpad.net/bugs/1708499
BugLink: https://bugs.launchpad.net/bugs/1709282
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
On recent Intel platforms (Haswell, Broadwell, Skylake, ApolloLake,
KabyLake, ...), the IEC Coding Type (ICT) bitfield in the Digital
Converter Control #3 needs to be set explicitly for HDMI/DisplayPort
High Bit Rate (HBR) audio playback to work. This was not required in
earlier platforms when HBR was first introduced. The ICT bits are
defined in Section 7.3.3.9 of the HDaudio 1.0a specification.
Since the ICT bitfield was not specified for HDAudio 1.0 devices
(before 2009), we only program it on machines more recent than
Haswell.
We tested that this fix is not needed on Baytrail-I (MinnowBoard
Turbot) and believe by extension it also does not apply to Braswell.
[ Moved AC_VERB_SET_DIGI_CONVERT_3 definition to the right place
by tiwai ]
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98797
Signed-off-by: Sriram Periyasamy <sriramx.periyasamy@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The hm->h.size is intended to hold the actual size of the hm struct
that is copied from userspace and should always be <= sizeof(*hm).
However, after copy_from_user(hm, puhm, hm->h.size), since userspace
process has full control over the memory region pointed by puhm, it is
possible that the value of hm->h.size is different from what is fetched-in
previously (get_user(hm->h.size, (u16 __user *)puhm)). In other words,
hm->h.size is overriden and the relation between hm->h.size and the hm
struct is broken.
This patch proposes to use a seperate variable, msg_size, to hold
the value of the first fetch and override hm->h.size to msg_size
after the second fetch to maintain the relation.
Signed-off-by: Meng Xu <mengxu.gatech@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Commit 04c5d5a430 ("ALSA: compress: Embed struct device") removed
the statement that used 'str' but didn't remove the variable itself.
So remove it.
[Adding stable to Cc since pr_debug() may refer to the uninitialized
buffer -- tiwai]
Fixes: 04c5d5a430 ("ALSA: compress: Embed struct device")
Signed-off-by: Guneshwor Singh <guneshwor.o.singh@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch constifies the path argument to kernel_read_file_from_path().
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
... and __initconst if applicable.
Based on similar work for an older kernel in the Grsecurity patch.
[JD: fix toshiba-wmi build]
[JD: add htcpen]
[JD: move __initconst where checkscript wants it]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jean Delvare <jdelvare@suse.de>
the sunxi-ng framework. Otherwise, the heavy hitters are various drivers
for SoCs like AT91, Amlogic, Renesas, and Rockchip. There are some other
new clk drivers in here too but overall this is just a bunch of clk
drivers for various different pieces of hardware and a collection of
non-critical fixes for clk drivers.
New Drivers:
- Allwinner R40 SoCs
- Renesas R-Car Gen3 USB 2.0 clock selector PHY
- Atmel AT91 audio PLL
- Uniphier PXs3 SoCs
- ARC HSDK Board PLLs
- AXS10X Board PLLs
- STMicroelectronics STM32H743 SoCs
Removed Drivers:
- Non-compiling mb86s7x support
Updates:
- Allwinner A10/A20 SoCs converted to sunxi-ng framework
- Allwinner H3 CPU clk fixes
- Renesas R-Car D3 SoC
- Renesas V2H and M3-W modules
- Samsung Exynos5420/5422/5800 audio fixes
- Rockchip fractional clk approximation fixes
- Rockchip rk3126 SoC support within the rk3128 driver
- Amlogic gxbb CEC32 and sd_emmc clks
- Amlogic meson8b reset controller support
- IDT VersaClock 5P49V5925/5P49V6901 support
- Qualcomm MSM8996 SMMU clks
- Various 'const' applications for struct clk_ops
- si5351 PLL reset bugfix
- Uniphier audio on LD11/LD20 and ethernet support on LD11/LD20/Pro4/PXs2
- Assorted Tegra clk driver fixes
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=0JbT
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"The diff is dominated by the Allwinner A10/A20 SoCs getting converted
to the sunxi-ng framework. Otherwise, the heavy hitters are various
drivers for SoCs like AT91, Amlogic, Renesas, and Rockchip. There are
some other new clk drivers in here too but overall this is just a
bunch of clk drivers for various different pieces of hardware and a
collection of non-critical fixes for clk drivers.
New Drivers:
- Allwinner R40 SoCs
- Renesas R-Car Gen3 USB 2.0 clock selector PHY
- Atmel AT91 audio PLL
- Uniphier PXs3 SoCs
- ARC HSDK Board PLLs
- AXS10X Board PLLs
- STMicroelectronics STM32H743 SoCs
Removed Drivers:
- Non-compiling mb86s7x support
Updates:
- Allwinner A10/A20 SoCs converted to sunxi-ng framework
- Allwinner H3 CPU clk fixes
- Renesas R-Car D3 SoC
- Renesas V2H and M3-W modules
- Samsung Exynos5420/5422/5800 audio fixes
- Rockchip fractional clk approximation fixes
- Rockchip rk3126 SoC support within the rk3128 driver
- Amlogic gxbb CEC32 and sd_emmc clks
- Amlogic meson8b reset controller support
- IDT VersaClock 5P49V5925/5P49V6901 support
- Qualcomm MSM8996 SMMU clks
- Various 'const' applications for struct clk_ops
- si5351 PLL reset bugfix
- Uniphier audio on LD11/LD20 and ethernet support on LD11/LD20/Pro4/PXs2
- Assorted Tegra clk driver fixes"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (120 commits)
clk: si5351: fix PLL reset
ASoC: atmel-classd: remove aclk clock
ASoC: atmel-classd: remove aclk clock from DT binding
clk: at91: clk-generated: make gclk determine audio_pll rate
clk: at91: clk-generated: create function to find best_diff
clk: at91: add audio pll clock drivers
dt-bindings: clk: at91: add audio plls to the compatible list
clk: at91: clk-generated: remove useless divisor loop
clk: mb86s7x: Drop non-building driver
clk: ti: check for null return in strrchr to avoid null dereferencing
clk: Don't write error code into divider register
clk: uniphier: add video input subsystem clock
clk: uniphier: add audio system clock
clk: stm32h7: Add stm32h743 clock driver
clk: gate: expose clk_gate_ops::is_enabled
clk: nxp: clk-lpc32xx: rename clk_gate_is_enabled()
clk: uniphier: add PXs3 clock data
clk: hi6220: change watchdog clock source
clk: Kconfig: Name RK805 in Kconfig for COMMON_CLK_RK808
clk: cs2000: Add cs2000_set_saved_rate
...
Most of the commits are trivial cleanup patches, while one commit
is a significant fix for the race at ALSA sequencer that was spotted
by syzkaller.
-----BEGIN PGP SIGNATURE-----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=R41d
-----END PGP SIGNATURE-----
Merge tag 'sound-fix-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Most of the commits are trivial cleanup patches, while one commit is a
significant fix for the race at ALSA sequencer that was spotted by
syzkaller"
* tag 'sound-fix-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: seq: Cancel pending autoload work at unbinding device
ALSA: firewire: Use common error handling code in snd_motu_stream_start_duplex()
ALSA: asihpi: Kill BUG_ON() usages
ALSA: core: Use %pS printk format for direct addresses
ALSA: ymfpci: Use common error handling code in snd_ymfpci_create()
ALSA: ymfpci: Use common error handling code in snd_card_ymfpci_probe()
ALSA: 6fire: Use common error handling code in usb6fire_chip_probe()
ALSA: usx2y: Use common error handling code in submit_urbs()
ALSA: us122l: Use common error handling code in us122l_create_card()
ALSA: hdspm: Use common error handling code in snd_hdspm_probe()
ALSA: rme9652: Use common code in hdsp_get_iobox_version()
ALSA: maestro3: Use common error handling code in two functions
ALSA sequencer core has a mechanism to load the enumerated devices
automatically, and it's performed in an off-load work. This seems
causing some race when a sequencer is removed while the pending
autoload work is running. As syzkaller spotted, it may lead to some
use-after-free:
BUG: KASAN: use-after-free in snd_rawmidi_dev_seq_free+0x69/0x70
sound/core/rawmidi.c:1617
Write of size 8 at addr ffff88006c611d90 by task kworker/2:1/567
CPU: 2 PID: 567 Comm: kworker/2:1 Not tainted 4.13.0+ #29
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
Workqueue: events autoload_drivers
Call Trace:
__dump_stack lib/dump_stack.c:16 [inline]
dump_stack+0x192/0x22c lib/dump_stack.c:52
print_address_description+0x78/0x280 mm/kasan/report.c:252
kasan_report_error mm/kasan/report.c:351 [inline]
kasan_report+0x230/0x340 mm/kasan/report.c:409
__asan_report_store8_noabort+0x1c/0x20 mm/kasan/report.c:435
snd_rawmidi_dev_seq_free+0x69/0x70 sound/core/rawmidi.c:1617
snd_seq_dev_release+0x4f/0x70 sound/core/seq_device.c:192
device_release+0x13f/0x210 drivers/base/core.c:814
kobject_cleanup lib/kobject.c:648 [inline]
kobject_release lib/kobject.c:677 [inline]
kref_put include/linux/kref.h:70 [inline]
kobject_put+0x145/0x240 lib/kobject.c:694
put_device+0x25/0x30 drivers/base/core.c:1799
klist_devices_put+0x36/0x40 drivers/base/bus.c:827
klist_next+0x264/0x4a0 lib/klist.c:403
next_device drivers/base/bus.c:270 [inline]
bus_for_each_dev+0x17e/0x210 drivers/base/bus.c:312
autoload_drivers+0x3b/0x50 sound/core/seq_device.c:117
process_one_work+0x9fb/0x1570 kernel/workqueue.c:2097
worker_thread+0x1e4/0x1350 kernel/workqueue.c:2231
kthread+0x324/0x3f0 kernel/kthread.c:231
ret_from_fork+0x25/0x30 arch/x86/entry/entry_64.S:425
The fix is simply to assure canceling the autoload work at removing
the device.
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add a jump target so that a bit of exception handling can be better reused
at the end of this function.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This macro is useful to avoid link error on 32-bit systems.
We have the same definition in two drivers, so move it to
include/linux/kernel.h
While we are here, refactor DIV_ROUND_UP_ULL() by using
DIV_ROUND_DOWN_ULL().
Link: http://lkml.kernel.org/r/1500945156-12907-1-git-send-email-yamada.masahiro@socionext.com
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Mark Brown <broonie@kernel.org>
Cc: Cyrille Pitchen <cyrille.pitchen@wedev4u.fr>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Cc: Marek Vasut <marek.vasut@gmail.com>
Cc: Brian Norris <computersforpeace@gmail.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- RK805 Power Management IC (PMIC)
- ROHM BD9571MWV-M MFD Power Management IC (PMIC)
- Texas Instruments TPS68470 Power Management IC (PMIC) & LEDs
- New Device Support
- Add support for HiSilicon Hi6421v530 to hi6421-pmic-core
- Add support for X-Powers AXP806 to axp20x
- Add support for X-Powers AXP813 to axp20x
- Add support for Intel Sunrise Point LPSS to intel-lpss-pci
- New Functionality
- Amend API to provide register layout; atmel-smc
- Fix-ups
- DT re-work; omap, nokia
- Header file location change {I2C => MFD}; dm355evm_msp, tps65010
- Fix chip ID formatting issue(s); rk808
- Optionally register touchscreen devices; da9052-core
- Documentation improvements; twl-core
- Constification; rtsx_pcr, ab8500-core, da9055-i2c, da9052-spi
- Drop unnecessary static declaration; max8925-i2c
- Kconfig changes (missing deps and remove module support)
- Slim down oversized licence statement; hi6421-pmic-core
- Use managed resources (devm_*); lp87565
- Supply proper error checking/handling; t7l66xb
- Bug Fixes
- Fix counter duplication issue; da9052-core
- Fix potential NULL deference issue; max8998
- Leave SPI-NOR write-protection bit alone; lpc_ich
- Ensure device is put into reset during suspend; intel-lpss
- Correct register offset variable size; omap-usb-tll
-----BEGIN PGP SIGNATURE-----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=TKIm
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"New Drivers
- RK805 Power Management IC (PMIC)
- ROHM BD9571MWV-M MFD Power Management IC (PMIC)
- Texas Instruments TPS68470 Power Management IC (PMIC) & LEDs
New Device Support:
- Add support for HiSilicon Hi6421v530 to hi6421-pmic-core
- Add support for X-Powers AXP806 to axp20x
- Add support for X-Powers AXP813 to axp20x
- Add support for Intel Sunrise Point LPSS to intel-lpss-pci
New Functionality:
- Amend API to provide register layout; atmel-smc
Fix-ups:
- DT re-work; omap, nokia
- Header file location change {I2C => MFD}; dm355evm_msp, tps65010
- Fix chip ID formatting issue(s); rk808
- Optionally register touchscreen devices; da9052-core
- Documentation improvements; twl-core
- Constification; rtsx_pcr, ab8500-core, da9055-i2c, da9052-spi
- Drop unnecessary static declaration; max8925-i2c
- Kconfig changes (missing deps and remove module support)
- Slim down oversized licence statement; hi6421-pmic-core
- Use managed resources (devm_*); lp87565
- Supply proper error checking/handling; t7l66xb
Bug Fixes:
- Fix counter duplication issue; da9052-core
- Fix potential NULL deference issue; max8998
- Leave SPI-NOR write-protection bit alone; lpc_ich
- Ensure device is put into reset during suspend; intel-lpss
- Correct register offset variable size; omap-usb-tll"
* tag 'mfd-next-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (61 commits)
mfd: intel_soc_pmic: Differentiate between Bay and Cherry Trail CRC variants
mfd: intel_soc_pmic: Export separate mfd-cell configs for BYT and CHT
dt-bindings: mfd: Add bindings for ZII RAVE devices
mfd: omap-usb-tll: Fix register offsets
mfd: da9052: Constify spi_device_id
mfd: intel-lpss: Put I2C and SPI controllers into reset state on suspend
mfd: da9055: Constify i2c_device_id
mfd: intel-lpss: Add missing PCI ID for Intel Sunrise Point LPSS devices
mfd: t7l66xb: Handle return value of clk_prepare_enable
mfd: Add ROHM BD9571MWV-M PMIC DT bindings
mfd: intel_soc_pmic_chtwc: Turn Kconfig option into a bool
mfd: lp87565: Convert to use devm_mfd_add_devices()
mfd: Add support for TPS68470 device
mfd: lpc_ich: Do not touch SPI-NOR write protection bit on Haswell/Broadwell
mfd: syscon: atmel-smc: Add helper to retrieve register layout
mfd: axp20x: Use correct platform device ID for many PEK
dt-bindings: mfd: axp20x: Introduce bindings for AXP813
mfd: axp20x: Add support for AXP813 PMIC
dt-bindings: mfd: axp20x: Add AXP806 to supported list of chips
mfd: Add ROHM BD9571MWV-M MFD PMIC driver
...
We have touched quite a lot of files but with fewer changes at this
cycle; as you can see, most of changes are trivial fixes, especially
constification patches. Among the massive attacks by constification
gangs, we had a few core changes (mostly for ASoC core), as well the
fixes and the updates by major vendors. Some highlights are below:
ALSA core:
- Fix possible races in control API user-TLV codes
- Small cleanup of PCM core
ASoC:
- Continued work for componentization; still half-baked, but we're
certainly progressing
- Use of devres for jack detection GPIOs, rather as a cleanup
- Jack detection support for Qualcomm MSM8916
- Support for Allwinner H3, Cirrus Logic CS43130, Intel Kabylake
systems with RT5663, Realtek RT274, TI TLV320AIC32x6 and Wolfson
WM8523
-----BEGIN PGP SIGNATURE-----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=/Rv6
-----END PGP SIGNATURE-----
Merge tag 'sound-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"We have touched quite a lot of files but with fewer changes at this
cycle; as you can see, most of changes are trivial fixes, especially
constification patches.
Among the massive attacks by constification gangs, we had a few core
changes (mostly for ASoC core), as well the fixes and the updates by
major vendors.
Some highlights:
ALSA core:
- Fix possible races in control API user-TLV codes
- Small cleanup of PCM core
ASoC:
- Continued work for componentization; still half-baked, but we're
certainly progressing
- Use of devres for jack detection GPIOs, rather as a cleanup
- Jack detection support for Qualcomm MSM8916
- Support for Allwinner H3, Cirrus Logic CS43130, Intel Kabylake
systems with RT5663, Realtek RT274, TI TLV320AIC32x6 and Wolfson
WM8523"
* tag 'sound-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (512 commits)
ALSA: hda/ca0132 - Fix memory leak at error path
ALSA: hda: Fix forget to free resource in error handling code path in hda_codec_driver_probe
ASoC: cs43130: Fix unused compiler warnings for PM runtime
ASoC: cs43130: Fix possible Oops with invalid dev_id
ASoC: cs43130: fix spelling mistake: "irq_occurrance" -> "irq_occurrence"
ALSA: atmel: Remove leftovers of AVR32 removal
ALSA: atmel: convert AC97c driver to GPIO descriptor API
ALSA: hda/realtek - Enable jack detection function for Intel ALC700
ALSA: hda: Fix regression of hdmi eld control created based on invalid pcm
ASoC: Intel: Skylake: Add IPC to configure the copier secondary pins
ASoC: add missing compile rule for max98371
ASoC: add missing compile rule for sirf-audio-codec
ASoC: add missing compile rule for max98371
ASoC: cs43130: Add devicetree bindings for CS43130
ASoC: cs43130: Add support for CS43130 codec
ASoC: make clock direction configurable in asoc-simple
ALSA: ctxfi: Remove null check before kfree
ASoC: max98927: Changed device property read function
ASoC: max98927: Modified DAPM widget and map to enable/disable VI sense path
ASoC: max98927: Added PM suspend and resume function
...
BUG_ON() is the worst choice for a trivial sanity check.
Either it should be removed or replaced with a softer one like
WARN_ON() if still really needed.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The debug functions uses wrongly the %pF instead of the %pS printk format
specifier for printing symbols for the address returned by
_builtin_return_address(0). Fix it for the ia64, ppc64 and parisc64
architectures.
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
* Add a jump target so that a bit of exception handling can be better
reused at the end of this function.
This issue was detected by using the Coccinelle software.
* The script "checkpatch.pl" pointed information out like the following.
ERROR: do not use assignment in if condition
Thus fix a few source code places.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
* Add a jump target so that a bit of exception handling can be better
reused at the end of this function.
This issue was detected by using the Coccinelle software.
* The script "checkpatch.pl" pointed information out like the following.
ERROR: do not use assignment in if condition
Thus fix a few source code places.
[ This also fixed a potential use-after-free at error path of
snd_opl3_hwdep_new(), too -- tiwai ]
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add a jump target so that a bit of exception handling can be better reused
at the end of this function.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add a jump target so that a bit of exception handling can be better reused
at the end of this function.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add a jump target so that a bit of exception handling can be better reused
at the end of this function.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add a jump target so that a bit of exception handling can be better reused
at the end of this function.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add a jump target so that a bit of common code can be better reused
at the end of this function.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add jump targets so that a bit of exception handling can be better reused
at the end of these functions.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Pull parisc updates from Helge Deller:
"Major changes include:
- Full support of the firmware Page Deallocation Table with
MADV_HWPOISON and MADV_SOFT_OFFLINE. A kernel thread scans
regularily for new bad memory pages.
- Full support for self-extracting kernel.
- Added UBSAN support.
- Lots of section mismatch fixes across all parisc drivers.
- Added examples for %pF and %pS usage in printk-formats.txt"
* 'parisc-4.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: (28 commits)
printk-formats.txt: Add examples for %pF and %pS usage
parisc: Fix up devices below a PCI-PCI MegaRAID controller bridge
parisc/core: Fix section mismatches
parisc/ipmi_si_intf: Fix section mismatches on parisc platform
parisc/input/hilkbd: Fix section mismatches
parisc/net/lasi_82596: Fix section mismatches
parisc/serio: Fix section mismatches in gscps2 and hp_sdc drivers
parisc: Fix section mismatches in parisc core drivers
parisc/parport_gsc: Fix section mismatches
parisc/scsi/lasi700: Fix section mismatches
parisc/scsi/zalon: Fix section mismatches
parisc/8250_gsc: Fix section mismatches
parisc/mux: Fix section mismatches
parisc/sticore: Fix section mismatches
parisc/harmony: Fix section mismatches
parisc: Wire up support for self-extracting kernel
parisc: Make existing core files reuseable for bootloader
parisc: Add core code for self-extracting kernel
parisc: Enable UBSAN support
parisc/random: Add machine specific randomness
...
A couple of warning fixes for the newly added CS43130 driver.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAlmtesYTHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0JAOB/9AoBjdVjBNuAm1Wbbx4/HNa+8AbptV
bEgyg7DAP9Dua0XxZqDikm14LdD1iOUziQRJcMzm0ooqdVgNR3gD3GyMuj5EJhtb
5ov27XHD5jHkgZaOUtLke2IeK2NuvC0v3ik3iMMcc37Z9p+zTzjemVUpgxYZk6Fe
jGo/efNFPmHyoD05XIqnRoTeDEQNojRVYKzEcxg2KJhsLi0zCRdxsbWkt+X6fw/Z
b/UXIfpcRvogc2Qsm+tngmyN+oN05zKItUQKU8WUfexp7gI6BBNfs49un+NDgfp1
r0YLMWGhKcjwtw3J3Fp1Nq1lfi8Hbl7+EXJCADDlACFA03A1pKeiuX8C
=4ibF
-----END PGP SIGNATURE-----
Merge tag 'asoc-v4.14-cs43130' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for the CS43130 driver
A couple of warning fixes for the newly added CS43130 driver.
The CA0132 codec driver doesn't call the free function at its error
path of the probe, which leaves the allocated memory. Call
ca0132_free() properly at the error handling.
Fixes: a73d511c48 ("ALSA: hda/ca0132: Add unsol handler for DSP and jack detection")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When hda_codec_driver_probe meet error and return failure, we need
to free resource with patch_ops.free, or we will get resource leak.
Signed-off-by: Wang YanQing <udknight@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add __maybe_unused prefix for addressing the following warnings:
sound/soc/codecs/cs43130.c:2615:12: warning: ‘cs43130_runtime_resume’ defined but not used [-Wunused-function]
sound/soc/codecs/cs43130.c:2596:12: warning: ‘cs43130_runtime_suspend’ defined but not used [-Wunused-function]
Fixes: 8f1e5bf9b4 ("ASoC: cs43130: Add support for CS43130 codec")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
As compiler spotted out, there is the potential NULL-dereference in
the code when dc-measure OF is given for other than 43130/43131:
sound/soc/codecs/cs43130.c:2089:18: warning: ‘hpload_seq’ may be used uninitialized in this function [-Wmaybe-uninitialized]
Warn it and return before triggering Oops.
Fixes: 8f1e5bf9b4 ("ASoC: cs43130: Add support for CS43130 codec")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
include/linux/i2c is not for client devices. Move the header file to a
more appropriate location.
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Acked-by: Thierry Reding <thierry.reding@gmail.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
This is quite a large release by volume of patches and diff, a lot of
that is mechanical cleanup patches but it's great to also see a range of
vendors actively working on adding new features and fixing issues in
their drivers. Intel and Realtek have been especially active here.
- Continued work towards moving everything to the component model from
Morimoto-san.
- Use of devres for jack detection GPIOs, eliminating some potential
resource leaks.
- Jack detection support for Qualcomm MSM8916.
- Support for Allwinner H3, Cirrus Logic CS43130, Intel Kabylake
systems with RT5663, Realtek RT274, TI TLV320AIC32x6 and Wolfson
WM8523.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAlmtSMgTHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0CVaCACFfGdNx730HTPAo90sOELYheJPYARN
+9NDDh4XdDDQDcV81h64U4Osu0ZR1HKzxLLFkurhmvX3efwXwMKVKbKQ2H3XKSg0
YPrpU/HuNoTsdLlF9X4r3GCBKZqKTsW8kmm2GCDV0LJRR4TTfWyzThYwunraNzfn
FB6R7h3I6yqmWy9LohNPdysB8LUUM+TSZMeBmaWo9S0TIFusPzWy+7jx5O4lsb6q
tqdr3LXQzpZslgO0chZJ+ZydBUNc+FmGqf7EkE/DR/CWSJFnan82SAUHt7FcgvLx
9sxcJniEvUVVlEl1SP6PMVBAnhxKRHXRtTQB3hVubwD/lmgUYoamP7k/
=oC+M
-----END PGP SIGNATURE-----
Merge tag 'asoc-v4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v4.14
This is quite a large release by volume of patches and diff, a lot of
that is mechanical cleanup patches but it's great to also see a range of
vendors actively working on adding new features and fixing issues in
their drivers. Intel and Realtek have been especially active here.
- Continued work towards moving everything to the component model from
Morimoto-san.
- Use of devres for jack detection GPIOs, eliminating some potential
resource leaks.
- Jack detection support for Qualcomm MSM8916.
- Support for Allwinner H3, Cirrus Logic CS43130, Intel Kabylake
systems with RT5663, Realtek RT274, TI TLV320AIC32x6 and Wolfson
WM8523.
Trivial fix to spelling mistake in variable name
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Takashi Iwai