Commit Graph

16 Commits

Author SHA1 Message Date
Liu Yu-B13201 d03e067778 dts/mpc8569mds: Cleanup tbi phy to support rtbi
After these change, when need to work in rtbi mode,
just change phy-connection-type to "rtbi".

Also, this work can be done by u-boot.

Signed-off-by: Liu Yu <yu.liu@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-21 01:17:54 -08:00
Anton Vorontsov 3cfee0aaa1 powerpc/85xx: Add power management support for MPC85xxMDS boards
- Add power management controller nodes;
- Add interrupts for RTC nodes, the RTC interrupt may be used as a
  wakeup source;
- Add sleep properties (DEVDISR bit mask) and sleep-nexus nodes.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Acked-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-11-11 21:43:29 -06:00
Anton Vorontsov a070e66ae8 powerpc/85xx: Fix USB GPIOs for MPC8569E-MDS boards
This patch fixes USB GPIOs numbers for MPC8569E-MDS boards, plus
according to the latest HW Getting Started Guide (rev 3.3, pilot
boards), USB "POWER" GPIO polarity has changed, it is no longer
inverted.

This patch makes USB Host somewhat work on pilot boards, though
there are still some problems with determining devices speed and
long bulk transfers.

Reported-by: Liu Yu <Yu.Liu@freescale.com>
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-11-05 07:18:08 -06:00
Anton Vorontsov 9b9d401b8d powerpc/85xx: Add QE USB support for MPC8569E-MDS boards
- Add gpio-controller node for BCSR17, it is used to control USB
  speed and VBUS;
- Add timer node for QE GTM, needed for USB host;
- Add usb node itself;
- Add some probing code for BCSR GPIOs.

NOTE: QE USB doesn't work on prototype boards, but should work on
      pilot boards if specs and schematics are correct, though we
      don't have the pilot boards to actually test it.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-08-25 09:44:10 -05:00
Anton Vorontsov 8a0b177f36 powerpc/85xx: Don't scan for TBI PHY addresses on MPC8569E-MDS boards
Sometimes (e.g. when there are no UEMs attached to a board)
fsl_pq_mdio_find_free() fails to find a spare address for a TBI PHY,
this is because get_phy_id() returns bogus 0x0000ffff values
(0xffffffff is expected), and therefore mdio bus probing fails with
the following message:

  fsl-pq_mdio: probe of e0082120.mdio failed with error -16

And obviously ethernet doesn't work after this.

This patch solves the problem by adding tbi-phy node into mdio node,
so that we won't scan for spare addresses, we'll just use a fixed one.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-07-29 23:16:39 -05:00
Anton Vorontsov 66c6b856d8 powerpc/85xx: Make eSDHC 1-bit only transfer mode default for MPC8569E-MDS
For yet unknown reason 4-bit mode doesn't work on MPC8569E-MDS boards,
so make 1-bit mode default. When we resolve the issue, u-boot will
remove sdhci,1-bit-only property from the device tree, while SDHCI
will still work with older u-boots.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-06-23 08:10:00 -05:00
Kevin Hao 40aa735335 powerpc/85xx: Add nor flash partitions for mpc8569mds
Add 4 partitions in nor flash. Also fix nor flash bank width bug. The
flash is capable of x8/x16 width but is configured for x8.

Signed-off-by: Kevin Hao <kexin.hao@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-06-15 21:45:32 -05:00
Haiying Wang b4a31c94b6 powerpc/85xx: Add UCC6 and UCC8 nodes in SGMII mode for MPC8569MDS
Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-06-15 21:45:30 -05:00
Kumar Gala 12ac426f88 powerpc/85xx: Add MSI nodes for MPC8568/9 MDS systems
The MPC8568/9 chips support MSIs on PCIe so no reason not to enable them.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-05-19 00:50:37 -05:00
Anton Vorontsov bd78c33a09 powerpc/85xx: Add STMicro M25P40 serial flash support for MPC8569E-MDS
For serial flash support we need to:

- Add QE Par IO Bank E device tree node, a GPIO from this bank is
  used for SPI chip-select line;
- Add serial-flash node;
- Add proper module alias into of/base.c.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-05-19 00:50:35 -05:00
Anton Vorontsov 5e8306fe5d powerpc/85xx: Enable Serial RapidIO for MPC85xx MDS boards
Select HAS_RAPIDIO symbol and add rio nodes for MPC8568E-MDS
and MPC8569E-MDS boards.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-05-19 00:50:34 -05:00
Anton Vorontsov 28da456a48 powerpc/85xx: Add eSDHC support for MPC8569E-MDS boards
Note that eSDHC and DUART0 are mutually exclusive on MPC8569E-MDS
boards. Default option is DUART0, so eSDHC is disabled by default.
U-Boot will fixup device tree if eSDHC should be used instead of
DUART0.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-05-19 00:50:33 -05:00
Anton Vorontsov ea38f579d5 powerpc/85xx: Fix reg & interrupts for mpc8569emds localbus added NAND
This patch fixes bogus reg = <> property in the localbus node,
and fixes interrupt property (should be "interrupts").

Also add node for NAND support.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-05-19 00:50:32 -05:00
Anton Vorontsov cd7e4a2cbb powerpc/85xx: Fix mpc8569emds crypto node to include SNOW unit
fsl,exec-units-mask should be 0xbfe to include SNOW unit in
MPC8569E's security engine.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-05-19 00:50:31 -05:00
Kumar Gala b1b6802586 powerpc/fsl: Removed reg property from 85xx/86xx soc node
Between the addition of the ecm/mcm law nodes and the fact that the
get_immrbase() has been using the range property of the SoC to determine
the base address of CCSR space we no longer need the reg property at
the soc node level.  It has been ill specified and varied between device
trees to cover either the {e,m}cm-law node, some odd subset of CCSR
space or all of CCSR space.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-05-19 00:50:29 -05:00
Haiying Wang 4b3b42b38a powerpc/85xx: Add MPC8569MDS board support
The MPC8569 is similiar to the MPC8568.  It doubles the number of
QUICC Engine RISC cores from 2 to 4.  Removes eTSECs, TLU and adds
the eSDHC controller.

Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-05-19 00:50:26 -05:00