Letting user space poke directly at variables which are used at run time is
stupid and causes a lot of race conditions and other issues.
Seperate the user variables and on change invoke the reconfiguration, which
then stops the watchdogs, reevaluates the new user value and restarts the
watchdogs with the new parameters.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Don Zickus <dzickus@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Ulrich Obergfell <uobergfe@redhat.com>
Link: http://lkml.kernel.org/r/20170912194147.939985640@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Both the perf reconfiguration and the powerpc watchdog_nmi_reconfigure()
need to be done in two steps.
1) Stop all NMIs
2) Read the new parameters and start NMIs
Right now watchdog_nmi_reconfigure() is a combination of both. To allow a
clean reconfiguration add a 'run' argument and split the functionality in
powerpc.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Don Zickus <dzickus@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Ulrich Obergfell <uobergfe@redhat.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/20170912194147.862865570@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reflect that these variables are user interface related and remove the
whitespace damage in the sysctl table while at it.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Don Zickus <dzickus@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Ulrich Obergfell <uobergfe@redhat.com>
Link: http://lkml.kernel.org/r/20170912194147.783210221@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The sysctl of the nmi_watchdog file prevents writes by setting:
min = max = 0
if none of the users is enabled. That involves ifdeffery and is competely
non obvious.
If none of the facilities is enabeld, then the file can simply be made read
only. Move the ifdeffery into the header and use a constant for file
permissions.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Don Zickus <dzickus@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Ulrich Obergfell <uobergfe@redhat.com>
Link: http://lkml.kernel.org/r/20170912194147.706073616@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Use a single function to update sysctl changes. This is not a high
frequency user space interface and it's root only.
Preparatory patch to cleanup the sysctl variable handling.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Don Zickus <dzickus@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Ulrich Obergfell <uobergfe@redhat.com>
Link: http://lkml.kernel.org/r/20170912194147.549114957@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The lockup detector reconfiguration tears down all watchdog threads when
the watchdog is disabled and sets them up again when its enabled.
That's a pointless exercise. The watchdog threads are not consuming an
insane amount of resources, so it's enough to set them up at init time and
keep them in parked position when the watchdog is disabled and unpark them
when it is reenabled. The smpboot thread infrastructure takes care of
keeping the force parked threads in place even across cpu hotplug.
Aside of that the code implements the park/unpark facility of smp hotplug
threads on its own, which is even more pointless. We have functionality in
the smpboot thread code to do so.
Use the new thread management functions and get rid of the unholy mess.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Don Zickus <dzickus@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Ulrich Obergfell <uobergfe@redhat.com>
Link: http://lkml.kernel.org/r/20170912194147.470370113@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The lockup detector reconfiguration tears down all watchdog threads when
the watchdog is disabled and sets them up again when its enabled.
That's a pointless exercise. The watchdog threads are not consuming an
insane amount of resources, so it's enough to set them up at init time and
keep them in parked position when the watchdog is disabled and unpark them
when it is reenabled. The smpboot thread infrastructure takes care of
keeping the force parked threads in place even across cpu hotplug.
Another horrible mechanism are the open coded park/unpark loops which are
used for reconfiguration of the watchdog. The smpboot infrastructure allows
exactly the same via smpboot_update_cpumask_thread_percpu(), which is cpu
hotplug safe. Using that instead of the open coded loops allows to get rid
of the hotplug locking mess in the watchdog code.
Implement a clean infrastructure which allows to replace the open coded
nonsense.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Don Zickus <dzickus@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Ulrich Obergfell <uobergfe@redhat.com>
Link: http://lkml.kernel.org/r/20170912194147.377182587@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
smpboot_update_cpumask_threads_percpu() allocates a temporary cpumask at
runtime. This is suboptimal because the call site needs more code size for
proper error handling than a statically allocated temporary mask requires
data size.
Add static temporary cpumask. The function is globaly serialized, so no
further protection required.
Remove the half baken error handling in the watchdog code and get rid of
the export as there are no in tree modular users of that function.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Don Zickus <dzickus@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Ulrich Obergfell <uobergfe@redhat.com>
Link: http://lkml.kernel.org/r/20170912194147.297288838@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Split the write part of the cpumask proc handler out into a separate helper
to avoid deep indentation. This also reduces the patch complexity in the
following cleanups.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Don Zickus <dzickus@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Ulrich Obergfell <uobergfe@redhat.com>
Link: http://lkml.kernel.org/r/20170912194147.218075991@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The #ifdef maze in this file is horrible, group stuff at least a bit so one
can figure out what belongs to what.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Don Zickus <dzickus@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Ulrich Obergfell <uobergfe@redhat.com>
Link: http://lkml.kernel.org/r/20170912194147.139629546@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Having stub functions which take a full page is not helping the
readablility of code.
Condense them and move the doubled #ifdef variant into the SYSFS section.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Don Zickus <dzickus@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Ulrich Obergfell <uobergfe@redhat.com>
Link: http://lkml.kernel.org/r/20170912194147.045545271@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Commit:
b94f51183b ("kernel/watchdog: prevent false hardlockup on overloaded system")
tries to fix the following issue:
proc_write()
set_sample_period() <--- New sample period becoms visible
<----- Broken starts
proc_watchdog_update()
watchdog_enable_all_cpus() watchdog_hrtimer_fn()
update_watchdog_all_cpus() restart_timer(sample_period)
watchdog_park_threads()
thread->park()
disable_nmi()
<----- Broken ends
The reason why this is broken is that the update of the watchdog threshold
becomes immediately effective and visible for the hrtimer function which
uses that value to rearm the timer. But the NMI/perf side still uses the
old value up to the point where it is disabled. If the rate has been
lowered then the NMI can run fast enough to 'detect' a hard lockup because
the timer has not fired due to the longer period.
The patch 'fixed' this by adding a variable:
proc_write()
set_sample_period()
<----- Broken starts
proc_watchdog_update()
watchdog_enable_all_cpus() watchdog_hrtimer_fn()
update_watchdog_all_cpus() restart_timer(sample_period)
watchdog_park_threads()
park_in_progress = 1
<----- Broken ends
nmi_watchdog()
if (park_in_progress)
return;
The only effect of this variable was to make the window where the breakage
can hit small enough that it was not longer observable in testing. From a
correctness point of view it is a pointless bandaid which merily papers
over the root cause: the unsychronized update of the variable.
Looking deeper into the related code pathes unearthed similar problems in
the watchdog_start()/stop() functions.
watchdog_start()
perf_nmi_event_start()
hrtimer_start()
watchdog_stop()
hrtimer_cancel()
perf_nmi_event_stop()
In both cases the call order is wrong because if the tasks gets preempted
or the VM gets scheduled out long enough after the first call, then there is
a chance that the next NMI will see a stale hrtimer interrupt count and
trigger a false positive hard lockup splat.
Get rid of park_in_progress so the code can be gradually deobfuscated and
pruned from several layers of duct tape papering over the root cause,
which has been either ignored or not understood at all.
Once this is removed the underlying problem will be fixed by rewriting the
proc interface to do a proper synchronized update.
Address the start/stop() ordering problem as well by reverting the call
order, so this part is at least correct now.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Don Zickus <dzickus@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Ulrich Obergfell <uobergfe@redhat.com>
Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1709052038270.2393@nanos
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The following deadlock is possible in the watchdog hotplug code:
cpus_write_lock()
...
takedown_cpu()
smpboot_park_threads()
smpboot_park_thread()
kthread_park()
->park() := watchdog_disable()
watchdog_nmi_disable()
perf_event_release_kernel();
put_event()
_free_event()
->destroy() := hw_perf_event_destroy()
x86_release_hardware()
release_ds_buffers()
get_online_cpus()
when a per cpu watchdog perf event is destroyed which drops the last
reference to the PMU hardware. The cleanup code there invokes
get_online_cpus() which instantly deadlocks because the hotplug percpu
rwsem is write locked.
To solve this add a deferring mechanism:
cpus_write_lock()
kthread_park()
watchdog_nmi_disable(deferred)
perf_event_disable(event);
move_event_to_deferred(event);
....
cpus_write_unlock()
cleaup_deferred_events()
perf_event_release_kernel()
This is still properly serialized against concurrent hotplug via the
cpu_add_remove_lock, which is held by the task which initiated the hotplug
event.
This is also used to handle event destruction when the watchdog threads are
parked via other mechanisms than CPU hotplug.
Analyzed-by: Peter Zijlstra <peterz@infradead.org>
Reported-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Don Zickus <dzickus@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Ulrich Obergfell <uobergfe@redhat.com>
Link: http://lkml.kernel.org/r/20170912194146.884469246@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The self disabling feature is broken vs. CPU hotplug locking:
CPU 0 CPU 1
cpus_write_lock();
cpu_up(1)
wait_for_completion()
....
unpark_watchdog()
->unpark()
perf_event_create() <- fails
watchdog_enable &= ~NMI_WATCHDOG;
....
cpus_write_unlock();
CPU 2
cpus_write_lock()
cpu_down(2)
wait_for_completion()
wakeup(watchdog);
watchdog()
if (!(watchdog_enable & NMI_WATCHDOG))
watchdog_nmi_disable()
perf_event_disable()
....
cpus_read_lock();
stop_smpboot_threads()
park_watchdog();
wait_for_completion(watchdog->parked);
Result: End of hotplug and instantaneous full lockup of the machine.
There is a similar problem with disabling the watchdog via the user space
interface as the sysctl function fiddles with watchdog_enable directly.
It's very debatable whether this is required at all. If the watchdog works
nicely on N CPUs and it fails to enable on the N + 1 CPU either during
hotplug or because the user space interface disabled it via sysctl cpumask
and then some perf user grabbed the counter which is then unavailable for
the watchdog when the sysctl cpumask gets changed back.
There is no real justification for this.
One of the reasons WHY this is done is the utter stupidity of the init code
of the perf NMI watchdog. Instead of checking upfront at boot whether PERF
is available and functional at all, it just does this check at run time
over and over when user space fiddles with the sysctl. That's broken beyond
repair along with the idiotic error code dependent warn level printks and
the even more silly printk rate limiting.
If the init code checks whether perf works at boot time, then this mess can
be more or less avoided completely. Perf does not come magically into life
at runtime. Brain usage while coding is overrated.
Remove the cruft and add a temporary safe guard which gets removed later.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Don Zickus <dzickus@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Ulrich Obergfell <uobergfe@redhat.com>
Link: http://lkml.kernel.org/r/20170912194146.806708429@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The function is only used by the KVM init code. Mark it __init to prevent
creative abuse.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Don Zickus <dzickus@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Ulrich Obergfell <uobergfe@redhat.com>
Link: http://lkml.kernel.org/r/20170912194146.727134632@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Following patches will use the mutex for other purposes as well. Rename it
as it is not longer a proc specific thing.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Don Zickus <dzickus@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Ulrich Obergfell <uobergfe@redhat.com>
Link: http://lkml.kernel.org/r/20170912194146.647714850@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The watchdog proc interface causes extensive recursive locking of the CPU
hotplug percpu rwsem, which is deadlock prone.
Replace the get/put_online_cpus() pairs with cpu_hotplug_disable()/enable()
calls for now. Later patches will remove that requirement completely.
Reported-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Don Zickus <dzickus@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Ulrich Obergfell <uobergfe@redhat.com>
Link: http://lkml.kernel.org/r/20170912194146.568079057@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This interface has several issues:
- It's causing recursive locking of the hotplug lock.
- It's complete overkill to teardown all threads and then recreate them
The same can be achieved with the simple hardlockup_detector_perf_stop /
restart() interfaces. The abuse from the busy looping poweroff() loop of
PARISC has been solved as well.
Remove the cruft.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Don Zickus <dzickus@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Ulrich Obergfell <uobergfe@redhat.com>
Link: http://lkml.kernel.org/r/20170912194146.487537732@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
PARISC has a a busy looping power off routine. If the watchdog is enabled
the watchdog timer will still fire, but the thread is not running, which
causes the softlockup watchdog to trigger.
Provide a interface which allows to turn the watchdog off.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Don Zickus <dzickus@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Ulrich Obergfell <uobergfe@redhat.com>
Cc: linux-parisc@vger.kernel.org
Link: http://lkml.kernel.org/r/20170912194146.327343752@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Provide an interface to stop and restart perf NMI watchdog events on all
CPUs. This is only usable during init and especially for handling the perf
HT bug on Intel machines. It's safe to use it this way as nothing can
start/stop the NMI watchdog in parallel.
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Don Zickus <dzickus@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Ulrich Obergfell <uobergfe@redhat.com>
Link: http://lkml.kernel.org/r/20170912194146.167649596@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
GFP_TEMPORARY was introduced by commit e12ba74d8f ("Group short-lived
and reclaimable kernel allocations") along with __GFP_RECLAIMABLE. It's
primary motivation was to allow users to tell that an allocation is
short lived and so the allocator can try to place such allocations close
together and prevent long term fragmentation. As much as this sounds
like a reasonable semantic it becomes much less clear when to use the
highlevel GFP_TEMPORARY allocation flag. How long is temporary? Can the
context holding that memory sleep? Can it take locks? It seems there is
no good answer for those questions.
The current implementation of GFP_TEMPORARY is basically GFP_KERNEL |
__GFP_RECLAIMABLE which in itself is tricky because basically none of
the existing caller provide a way to reclaim the allocated memory. So
this is rather misleading and hard to evaluate for any benefits.
I have checked some random users and none of them has added the flag
with a specific justification. I suspect most of them just copied from
other existing users and others just thought it might be a good idea to
use without any measuring. This suggests that GFP_TEMPORARY just
motivates for cargo cult usage without any reasoning.
I believe that our gfp flags are quite complex already and especially
those with highlevel semantic should be clearly defined to prevent from
confusion and abuse. Therefore I propose dropping GFP_TEMPORARY and
replace all existing users to simply use GFP_KERNEL. Please note that
SLAB users with shrinkers will still get __GFP_RECLAIMABLE heuristic and
so they will be placed properly for memory fragmentation prevention.
I can see reasons we might want some gfp flag to reflect shorterm
allocations but I propose starting from a clear semantic definition and
only then add users with proper justification.
This was been brought up before LSF this year by Matthew [1] and it
turned out that GFP_TEMPORARY really doesn't have a clear semantic. It
seems to be a heuristic without any measured advantage for most (if not
all) its current users. The follow up discussion has revealed that
opinions on what might be temporary allocation differ a lot between
developers. So rather than trying to tweak existing users into a
semantic which they haven't expected I propose to simply remove the flag
and start from scratch if we really need a semantic for short term
allocations.
[1] http://lkml.kernel.org/r/20170118054945.GD18349@bombadil.infradead.org
[akpm@linux-foundation.org: fix typo]
[akpm@linux-foundation.org: coding-style fixes]
[sfr@canb.auug.org.au: drm/i915: fix up]
Link: http://lkml.kernel.org/r/20170816144703.378d4f4d@canb.auug.org.au
Link: http://lkml.kernel.org/r/20170728091904.14627-1-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Mel Gorman <mgorman@suse.de>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Neil Brown <neilb@suse.de>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull scheduler fixes from Ingo Molnar:
"Three CPU hotplug related fixes and a debugging improvement"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/debug: Add debugfs knob for "sched_debug"
sched/core: WARN() when migrating to an offline CPU
sched/fair: Plug hole between hotplug and active_load_balance()
sched/fair: Avoid newidle balance for !active CPUs
Summary of modules changes for the 4.14 merge window:
- Minor code cleanups and fixes
- modpost: avoid building modules that have names that exceed the size
of the name field in struct module
Signed-off-by: Jessica Yu <jeyu@kernel.org>
-----BEGIN PGP SIGNATURE-----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=oTCM
-----END PGP SIGNATURE-----
Merge tag 'modules-for-v4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux
Pull modules updates from Jessica Yu:
"Summary of modules changes for the 4.14 merge window:
- minor code cleanups and fixes
- modpost: avoid building modules that have names that exceed the
size of the name field in struct module"
* tag 'modules-for-v4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
module: Remove const attribute from alias for MODULE_DEVICE_TABLE
module: fix ddebug_remove_module()
modpost: abort if module name is too long
-----BEGIN PGP SIGNATURE-----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=/6oy
-----END PGP SIGNATURE-----
Merge tag 'selinux-pr-20170831' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux updates from Paul Moore:
"A relatively quiet period for SELinux, 11 patches with only two/three
having any substantive changes.
These noteworthy changes include another tweak to the NNP/nosuid
handling, per-file labeling for cgroups, and an object class fix for
AF_UNIX/SOCK_RAW sockets; the rest of the changes are minor tweaks or
administrative updates (Stephen's email update explains the file
explosion in the diffstat).
Everything passes the selinux-testsuite"
[ Also a couple of small patches from the security tree from Tetsuo
Handa for Tomoyo and LSM cleanup. The separation of security policy
updates wasn't all that clean - Linus ]
* tag 'selinux-pr-20170831' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: constify nf_hook_ops
selinux: allow per-file labeling for cgroupfs
lsm_audit: update my email address
selinux: update my email address
MAINTAINERS: update the NetLabel and Labeled Networking information
selinux: use GFP_NOWAIT in the AVC kmem_caches
selinux: Generalize support for NNP/nosuid SELinux domain transitions
selinux: genheaders should fail if too many permissions are defined
selinux: update the selinux info in MAINTAINERS
credits: update Paul Moore's info
selinux: Assign proper class to PF_UNIX/SOCK_RAW sockets
tomoyo: Update URLs in Documentation/admin-guide/LSM/tomoyo.rst
LSM: Remove security_task_create() hook.
Pull irq fixes from Ingo Molnar:
"A sparse irq race/locking fix, and a MSI irq domains population fix"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq: Make sparse_irq_lock protect what it should protect
genirq/msi: Fix populating multiple interrupts
I'm forever late for editing my kernel cmdline, add a runtime knob to
disable the "sched_debug" thing.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20170907150614.142924283@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Migrating tasks to offline CPUs is a pretty big fail, warn about it.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20170907150614.094206976@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The load balancer applies cpu_active_mask to whatever sched_domains it
finds, however in the case of active_balance there is a hole between
setting rq->{active_balance,push_cpu} and running the stop_machine
work doing the actual migration.
The @push_cpu can go offline in this window, which would result in us
moving a task onto a dead cpu, which is a fairly bad thing.
Double check the active mask before the stop work does the migration.
CPU0 CPU1
<SoftIRQ>
stop_machine(takedown_cpu)
load_balance() cpu_stopper_thread()
... work = multi_cpu_stop
stop_one_cpu_nowait( /* wait for CPU0 */
.func = active_load_balance_cpu_stop
);
</SoftIRQ>
cpu_stopper_thread()
work = multi_cpu_stop
/* sync with CPU1 */
take_cpu_down()
<idle>
play_dead();
work = active_load_balance_cpu_stop
set_task_cpu(p, CPU1); /* oops!! */
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170907150614.044460912@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
On CPU hot unplug, when parking the last kthread we'll try and
schedule into idle to kill the CPU. This last schedule can (and does)
trigger newidle balance because at this point the sched domains are
still up because of commit:
77d1dfda0e ("sched/topology, cpuset: Avoid spurious/wrong domain rebuilds")
Obviously pulling tasks to an already offline CPU is a bad idea, and
all balancing operations _should_ be subject to cpu_active_mask, make
it so.
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes: 77d1dfda0e ("sched/topology, cpuset: Avoid spurious/wrong domain rebuilds")
Link: http://lkml.kernel.org/r/20170907150613.994135806@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull namespace updates from Eric Biederman:
"Life has been busy and I have not gotten half as much done this round
as I would have liked. I delayed it so that a minor conflict
resolution with the mips tree could spend a little time in linux-next
before I sent this pull request.
This includes two long delayed user namespace changes from Kirill
Tkhai. It also includes a very useful change from Serge Hallyn that
allows the security capability attribute to be used inside of user
namespaces. The practical effect of this is people can now untar
tarballs and install rpms in user namespaces. It had been suggested to
generalize this and encode some of the namespace information
information in the xattr name. Upon close inspection that makes the
things that should be hard easy and the things that should be easy
more expensive.
Then there is my bugfix/cleanup for signal injection that removes the
magic encoding of the siginfo union member from the kernel internal
si_code. The mips folks reported the case where I had used FPE_FIXME
me is impossible so I have remove FPE_FIXME from mips, while at the
same time including a return statement in that case to keep gcc from
complaining about unitialized variables.
I almost finished the work to get make copy_siginfo_to_user a trivial
copy to user. The code is available at:
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace.git neuter-copy_siginfo_to_user-v3
But I did not have time/energy to get the code posted and reviewed
before the merge window opened.
I was able to see that the security excuse for just copying fields
that we know are initialized doesn't work in practice there are buggy
initializations that don't initialize the proper fields in siginfo. So
we still sometimes copy unitialized data to userspace"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
Introduce v3 namespaced file capabilities
mips/signal: In force_fcr31_sig return in the impossible case
signal: Remove kernel interal si_code magic
fcntl: Don't use ambiguous SIG_POLL si_codes
prctl: Allow local CAP_SYS_ADMIN changing exe_file
security: Use user_namespace::level to avoid redundant iterations in cap_capable()
userns,pidns: Verify the userns for new pid namespaces
signal/testing: Don't look for __SI_FAULT in userspace
signal/mips: Document a conflict with SI_USER with SIGFPE
signal/sparc: Document a conflict with SI_USER with SIGFPE
signal/ia64: Document a conflict with SI_USER with SIGFPE
signal/alpha: Document a conflict with SI_USER for SIGTRAP
clang does not support variable length array for structure member.
It has the following error during compilation:
kernel/trace/trace_syscalls.c:568:17: error: fields must have a constant size:
'variable length array in structure' extension will never be supported
unsigned long args[sys_data->nb_args];
^
The fix is to use a fixed array length instead.
Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Work around kernel-doc warning ('*' in Sphinx doc means "emphasis"):
../kernel/sched/fair.c:7584: WARNING: Inline emphasis start-string without end-string.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/f18b30f9-6251-6d86-9d44-16501e386891@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull networking fixes from David Miller:
"The iwlwifi firmware compat fix is in here as well as some other
stuff:
1) Fix request socket leak introduced by BPF deadlock fix, from Eric
Dumazet.
2) Fix VLAN handling with TXQs in mac80211, from Johannes Berg.
3) Missing __qdisc_drop conversions in prio and qfq schedulers, from
Gao Feng.
4) Use after free in netlink nlk groups handling, from Xin Long.
5) Handle MTU update properly in ipv6 gre tunnels, from Xin Long.
6) Fix leak of ipv6 fib tables on netns teardown, from Sabrina Dubroca
with follow-on fix from Eric Dumazet.
7) Need RCU and preemption disabled during generic XDP data patch,
from John Fastabend"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (54 commits)
bpf: make error reporting in bpf_warn_invalid_xdp_action more clear
Revert "mdio_bus: Remove unneeded gpiod NULL check"
bpf: devmap, use cond_resched instead of cpu_relax
bpf: add support for sockmap detach programs
net: rcu lock and preempt disable missing around generic xdp
bpf: don't select potentially stale ri->map from buggy xdp progs
net: tulip: Constify tulip_tbl
net: ethernet: ti: netcp_core: no need in netif_napi_del
davicom: Display proper debug level up to 6
net: phy: sfp: rename dt properties to match the binding
dt-binding: net: sfp binding documentation
dt-bindings: add SFF vendor prefix
dt-bindings: net: don't confuse with generic PHY property
ip6_tunnel: fix setting hop_limit value for ipv6 tunnel
ip_tunnel: fix setting ttl and tos value in collect_md mode
ipv6: fix typo in fib6_net_exit()
tcp: fix a request socket leak
sctp: fix missing wake ups in some situations
netfilter: xt_hashlimit: fix build error caused by 64bit division
netfilter: xt_hashlimit: alloc hashtable with right size
...
Merge more updates from Andrew Morton:
- most of the rest of MM
- a small number of misc things
- lib/ updates
- checkpatch
- autofs updates
- ipc/ updates
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (126 commits)
ipc: optimize semget/shmget/msgget for lots of keys
ipc/sem: play nicer with large nsops allocations
ipc/sem: drop sem_checkid helper
ipc: convert kern_ipc_perm.refcount from atomic_t to refcount_t
ipc: convert sem_undo_list.refcnt from atomic_t to refcount_t
ipc: convert ipc_namespace.count from atomic_t to refcount_t
kcov: support compat processes
sh: defconfig: cleanup from old Kconfig options
mn10300: defconfig: cleanup from old Kconfig options
m32r: defconfig: cleanup from old Kconfig options
drivers/pps: use surrounding "if PPS" to remove numerous dependency checks
drivers/pps: aesthetic tweaks to PPS-related content
cpumask: make cpumask_next() out-of-line
kmod: move #ifdef CONFIG_MODULES wrapper to Makefile
kmod: split off umh headers into its own file
MAINTAINERS: clarify kmod is just a kernel module loader
kmod: split out umh code into its own file
test_kmod: flip INT checks to be consistent
test_kmod: remove paranoid UINT_MAX check on uint range processing
vfat: deduplicate hex2bin()
...
Be a bit more friendly about waiting for flush bits to complete.
Replace the cpu_relax() with a cond_resched().
Suggested-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The bpf map sockmap supports adding programs via attach commands. This
patch adds the detach command to keep the API symmetric and allow
users to remove previously added programs. Otherwise the user would
have to delete the map and re-add it to get in this state.
This also adds a series of additional tests to capture detach operation
and also attaching/detaching invalid prog types.
API note: socks will run (or not run) programs depending on the state
of the map at the time the sock is added. We do not for example walk
the map and remove programs from previously attached socks.
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
We can potentially run into a couple of issues with the XDP
bpf_redirect_map() helper. The ri->map in the per CPU storage
can become stale in several ways, mostly due to misuse, where
we can then trigger a use after free on the map:
i) prog A is calling bpf_redirect_map(), returning XDP_REDIRECT
and running on a driver not supporting XDP_REDIRECT yet. The
ri->map on that CPU becomes stale when the XDP program is unloaded
on the driver, and a prog B loaded on a different driver which
supports XDP_REDIRECT return code. prog B would have to omit
calling to bpf_redirect_map() and just return XDP_REDIRECT, which
would then access the freed map in xdp_do_redirect() since not
cleared for that CPU.
ii) prog A is calling bpf_redirect_map(), returning a code other
than XDP_REDIRECT. prog A is then detached, which triggers release
of the map. prog B is attached which, similarly as in i), would
just return XDP_REDIRECT without having called bpf_redirect_map()
and thus be accessing the freed map in xdp_do_redirect() since
not cleared for that CPU.
iii) prog A is attached to generic XDP, calling the bpf_redirect_map()
helper and returning XDP_REDIRECT. xdp_do_generic_redirect() is
currently not handling ri->map (will be fixed by Jesper), so it's
not being reset. Later loading a e.g. native prog B which would,
say, call bpf_xdp_redirect() and then returns XDP_REDIRECT would
find in xdp_do_redirect() that a map was set and uses that causing
use after free on map access.
Fix thus needs to avoid accessing stale ri->map pointers, naive
way would be to call a BPF function from drivers that just resets
it to NULL for all XDP return codes but XDP_REDIRECT and including
XDP_REDIRECT for drivers not supporting it yet (and let ri->map
being handled in xdp_do_generic_redirect()). There is a less
intrusive way w/o letting drivers call a reset for each BPF run.
The verifier knows we're calling into bpf_xdp_redirect_map()
helper, so it can do a small insn rewrite transparent to the prog
itself in the sense that it fills R4 with a pointer to the own
bpf_prog. We have that pointer at verification time anyway and
R4 is allowed to be used as per calling convention we scratch
R0 to R5 anyway, so they become inaccessible and program cannot
read them prior to a write. Then, the helper would store the prog
pointer in the current CPUs struct redirect_info. Later in
xdp_do_*_redirect() we check whether the redirect_info's prog
pointer is the same as passed xdp_prog pointer, and if that's
the case then all good, since the prog holds a ref on the map
anyway, so it is always valid at that point in time and must
have a reference count of at least 1. If in the unlikely case
they are not equal, it means we got a stale pointer, so we clear
and bail out right there. Also do reset map and the owning prog
in bpf_xdp_redirect(), so that bpf_xdp_redirect_map() and
bpf_xdp_redirect() won't get mixed up, only the last call should
take precedence. A tc bpf_redirect() doesn't use map anywhere
yet, so no need to clear it there since never accessed in that
layer.
Note that in case the prog is released, and thus the map as
well we're still under RCU read critical section at that time
and have preemption disabled as well. Once we commit with the
__dev_map_insert_ctx() from xdp_do_redirect_map() and set the
map to ri->map_to_flush, we still wait for a xdp_do_flush_map()
to finish in devmap dismantle time once flush_needed bit is set,
so that is fine.
Fixes: 97f91a7cf0 ("bpf: add bpf_redirect_map helper routine")
Reported-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Support compat processes in KCOV by providing compat_ioctl callback.
Compat mode uses the same ioctl callback: we have 2 commands that do not
use the argument and 1 that already checks that the arg does not overflow
INT_MAX. This allows to use KCOV-guided fuzzing in compat processes.
Link: http://lkml.kernel.org/r/20170823100553.55812-1-dvyukov@google.com
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Cc: <syzkaller@googlegroups.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Collection of aesthetic adjustments to various PPS-related files,
directories and Documentation, some quite minor just for the sake of
consistency, including:
* Updated example of pps device tree node (courtesy Rodolfo G.)
* "PPS-API" -> "PPS API"
* "pps_source_info_s" -> "pps_source_info"
* "ktimer driver" -> "pps-ktimer driver"
* "ppstest /dev/pps0" -> "ppstest /dev/pps1" to match example
* Add missing PPS-related entries to MAINTAINERS file
* Other trivialities
Link: http://lkml.kernel.org/r/alpine.LFD.2.20.1708261048220.8106@localhost.localdomain
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Acked-by: Rodolfo Giometti <giometti@enneenne.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The entire file is now conditionally compiled only when CONFIG_MODULES is
enabled, and this this is a bool. Just move this conditional to the
Makefile as its easier to read this way.
Link: http://lkml.kernel.org/r/20170810180618.22457-5-mcgrof@kernel.org
Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Jessica Yu <jeyu@redhat.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Michal Marek <mmarek@suse.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Miroslav Benes <mbenes@suse.cz>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Matt Redfearn <matt.redfearn@imgtec.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Daniel Mentz <danielmentz@google.com>
Cc: David Binderman <dcb314@hotmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "kmod: few code cleanups to split out umh code"
The usermode helper has a provenance from the old usb code which first
required a usermode helper. Eventually this was shoved into kmod.c and
the kernel's modprobe calls was converted over eventually to share the
same code. Over time the list of usermode helpers in the kernel has grown
-- so kmod is just but one user of the API.
This series is a simple logical cleanup which acknowledges the code
evolution of the usermode helper and shoves the UMH API into its own
dedicated file. This way users of the API can later just include umh.h
instead of kmod.h.
Note despite the diff state the first patch really is just a code shove,
no functional changes are done there. I did use git format-patch -M to
generate the patch, but in the end the split was not enough for git to
consider it a rename hence the large diffstat.
I've put this through 0-day and it gives me their machine compilation
blessings with all tests as OK.
This patch (of 4):
There's a slew of usermode helper users and kmod is just one of them.
Split out the usermode helper code into its own file to keep the logic and
focus split up.
This change provides no functional changes.
Link: http://lkml.kernel.org/r/20170810180618.22457-2-mcgrof@kernel.org
Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Jessica Yu <jeyu@redhat.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Michal Marek <mmarek@suse.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Miroslav Benes <mbenes@suse.cz>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Matt Redfearn <matt.redfearn@imgtec.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Daniel Mentz <danielmentz@google.com>
Cc: David Binderman <dcb314@hotmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
First, number of CPUs can't be negative number.
Second, different signnnedness leads to suboptimal code in the following
cases:
1)
kmalloc(nr_cpu_ids * sizeof(X));
"int" has to be sign extended to size_t.
2)
while (loff_t *pos < nr_cpu_ids)
MOVSXD is 1 byte longed than the same MOV.
Other cases exist as well. Basically compiler is told that nr_cpu_ids
can't be negative which can't be deduced if it is "int".
Code savings on allyesconfig kernel: -3KB
add/remove: 0/0 grow/shrink: 25/264 up/down: 261/-3631 (-3370)
function old new delta
coretemp_cpu_online 450 512 +62
rcu_init_one 1234 1272 +38
pci_device_probe 374 399 +25
...
pgdat_reclaimable_pages 628 556 -72
select_fallback_rq 446 369 -77
task_numa_find_cpu 1923 1807 -116
Link: http://lkml.kernel.org/r/20170819114959.GA30580@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Platform with advance system bus (like CAPI or CCIX) allow device memory
to be accessible from CPU in a cache coherent fashion. Add a new type of
ZONE_DEVICE to represent such memory. The use case are the same as for
the un-addressable device memory but without all the corners cases.
Link: http://lkml.kernel.org/r/20170817000548.32038-19-jglisse@redhat.com
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Cc: Aneesh Kumar <aneesh.kumar@linux.vnet.ibm.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: David Nellans <dnellans@nvidia.com>
Cc: Evgeny Baskakov <ebaskakov@nvidia.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Mark Hairgrove <mhairgrove@nvidia.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Sherry Cheung <SCheung@nvidia.com>
Cc: Subhash Gutti <sgutti@nvidia.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Bob Liu <liubo95@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
HMM pages (private or public device pages) are ZONE_DEVICE page and thus
need special handling when it comes to lru or refcount. This patch make
sure that memcontrol properly handle those when it face them. Those pages
are use like regular pages in a process address space either as anonymous
page or as file back page. So from memcg point of view we want to handle
them like regular page for now at least.
Link: http://lkml.kernel.org/r/20170817000548.32038-11-jglisse@redhat.com
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Acked-by: Balbir Singh <bsingharora@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Aneesh Kumar <aneesh.kumar@linux.vnet.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Nellans <dnellans@nvidia.com>
Cc: Evgeny Baskakov <ebaskakov@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Mark Hairgrove <mhairgrove@nvidia.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Sherry Cheung <SCheung@nvidia.com>
Cc: Subhash Gutti <sgutti@nvidia.com>
Cc: Bob Liu <liubo95@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A ZONE_DEVICE page that reach a refcount of 1 is free ie no longer have
any user. For device private pages this is important to catch and thus we
need to special case put_page() for this.
Link: http://lkml.kernel.org/r/20170817000548.32038-9-jglisse@redhat.com
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Aneesh Kumar <aneesh.kumar@linux.vnet.ibm.com>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David Nellans <dnellans@nvidia.com>
Cc: Evgeny Baskakov <ebaskakov@nvidia.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Mark Hairgrove <mhairgrove@nvidia.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Sherry Cheung <SCheung@nvidia.com>
Cc: Subhash Gutti <sgutti@nvidia.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Bob Liu <liubo95@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
HMM (heterogeneous memory management) need struct page to support
migration from system main memory to device memory. Reasons for HMM and
migration to device memory is explained with HMM core patch.
This patch deals with device memory that is un-addressable memory (ie CPU
can not access it). Hence we do not want those struct page to be manage
like regular memory. That is why we extend ZONE_DEVICE to support
different types of memory.
A persistent memory type is define for existing user of ZONE_DEVICE and a
new device un-addressable type is added for the un-addressable memory
type. There is a clear separation between what is expected from each
memory type and existing user of ZONE_DEVICE are un-affected by new
requirement and new use of the un-addressable type. All specific code
path are protect with test against the memory type.
Because memory is un-addressable we use a new special swap type for when a
page is migrated to device memory (this reduces the number of maximum swap
file).
The main two additions beside memory type to ZONE_DEVICE is two callbacks.
First one, page_free() is call whenever page refcount reach 1 (which
means the page is free as ZONE_DEVICE page never reach a refcount of 0).
This allow device driver to manage its memory and associated struct page.
The second callback page_fault() happens when there is a CPU access to an
address that is back by a device page (which are un-addressable by the
CPU). This callback is responsible to migrate the page back to system
main memory. Device driver can not block migration back to system memory,
HMM make sure that such page can not be pin into device memory.
If device is in some error condition and can not migrate memory back then
a CPU page fault to device memory should end with SIGBUS.
[arnd@arndb.de: fix warning]
Link: http://lkml.kernel.org/r/20170823133213.712917-1-arnd@arndb.de
Link: http://lkml.kernel.org/r/20170817000548.32038-8-jglisse@redhat.com
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Aneesh Kumar <aneesh.kumar@linux.vnet.ibm.com>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David Nellans <dnellans@nvidia.com>
Cc: Evgeny Baskakov <ebaskakov@nvidia.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Mark Hairgrove <mhairgrove@nvidia.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Sherry Cheung <SCheung@nvidia.com>
Cc: Subhash Gutti <sgutti@nvidia.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Bob Liu <liubo95@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
HMM provides 3 separate types of functionality:
- Mirroring: synchronize CPU page table and device page table
- Device memory: allocating struct page for device memory
- Migration: migrating regular memory to device memory
This patch introduces some common helpers and definitions to all of
those 3 functionality.
Link: http://lkml.kernel.org/r/20170817000548.32038-3-jglisse@redhat.com
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Signed-off-by: Evgeny Baskakov <ebaskakov@nvidia.com>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Mark Hairgrove <mhairgrove@nvidia.com>
Signed-off-by: Sherry Cheung <SCheung@nvidia.com>
Signed-off-by: Subhash Gutti <sgutti@nvidia.com>
Cc: Aneesh Kumar <aneesh.kumar@linux.vnet.ibm.com>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Nellans <dnellans@nvidia.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Bob Liu <liubo95@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
fixes that were found during development of changes for the next merge
window and fixes that were sent to me late in the last cycle.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEQEw9Eu0DdyUUkuUUybkF8mrZjcsFAlmypCkUHHJvc3RlZHRA
Z29vZG1pcy5vcmcACgkQybkF8mrZjcvLdAf/SsYlTViKTxM/jgsDD8fsbS9yOjl7
9s9WgXkCHlvvpdATQIOBTSXKjc4OWDspwpybkaogf/Pz5xo1qo2JhqgdOK85UxUf
vbYOt0lKEb+wEFXeeZCAIT3yTS22ILazNE9k6/u/0URF4cByTSnNPMWr9h9OJHzO
n5gToZgkGNeLMiPa45eY9n7TqHAGvHRSMYzETyrD8LTiEw1IYLaCaWIYswNTrH7o
TMMT4bmCRWc8XACpqH5EWK0Wq69JuV6trJBHxiJKNJfebl5ojAs5gsARMMoDP3vV
q1sTjtgPE/anOOGRwnxlKz3jIcMDGfY0Aw3kFoXkWN3ROsJRm8apUd4QPQ==
=dDI4
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
"Nothing new in development for this release. These are mostly fixes
that were found during development of changes for the next merge
window and fixes that were sent to me late in the last cycle"
* tag 'trace-v4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Apply trace_clock changes to instance max buffer
tracing: Fix clear of RECORDED_TGID flag when disabling trace event
tracing: Add barrier to trace_printk() buffer nesting modification
ftrace: Fix memleak when unregistering dynamic ops when tracing disabled
ftrace: Fix selftest goto location on error
ftrace: Zero out ftrace hashes when a module is removed
tracing: Only have rmmod clear buffers that its events were active in
ftrace: Fix debug preempt config name in stack_tracer_{en,dis}able
Pull printk updates from Petr Mladek:
- Do not allow use of freed init data and code even when boot consoles
are forced to stay. Also check for the init memory more precisely.
- Some code clean up by starting contributors.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk:
printk: Clean up do_syslog() error handling
printk/console: Enhance the check for consoles using init memory
printk/console: Always disable boot consoles that use init memory before it is freed
printk: Modify operators of printed_len and text_len
-----BEGIN PGP SIGNATURE-----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=in0T
-----END PGP SIGNATURE-----
Merge tag 'audit-pr-20170907' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit
Pull audit updates from Paul Moore:
"A small pull request for audit this time, only four patches and only
two with any real code changes.
Those two changes are the removal of a pointless SELinux AVC
initialization audit event and a fix to improve the audit timestamp
overhead.
The other two patches are comment cleanup and administrative updates,
nothing very exciting.
Everything passes our tests"
* tag 'audit-pr-20170907' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
audit: update the function comments
selinux: remove AVC init audit log message
audit: update the audit info in MAINTAINERS
audit: Reduce overhead using a coarse clock
and defining more restrictive root directory DAC permissions default
(0750, which can be adjust after boot unlike the CAP_SYSLOG check).
Suggested by Nick Kralevich.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
Comment: Kees Cook <kees@outflux.net>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=+gsj
-----END PGP SIGNATURE-----
Merge tag 'pstore-v4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull pstore update from Kees Cook:
"Make pstore permissions more versatile by removing CAP_SYSLOG
requirement and defining more restrictive root directory DAC
permissions default (0750, which can be adjust after boot unlike the
CAP_SYSLOG check).
Suggested by Nick Kralevich"
* tag 'pstore-v4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
Revert "pstore: Honor dmesg_restrict sysctl on dmesg dumps"
pstore: Make default pstorefs root dir perms 0750
Pull block layer updates from Jens Axboe:
"This is the first pull request for 4.14, containing most of the code
changes. It's a quiet series this round, which I think we needed after
the churn of the last few series. This contains:
- Fix for a registration race in loop, from Anton Volkov.
- Overflow complaint fix from Arnd for DAC960.
- Series of drbd changes from the usual suspects.
- Conversion of the stec/skd driver to blk-mq. From Bart.
- A few BFQ improvements/fixes from Paolo.
- CFQ improvement from Ritesh, allowing idling for group idle.
- A few fixes found by Dan's smatch, courtesy of Dan.
- A warning fixup for a race between changing the IO scheduler and
device remova. From David Jeffery.
- A few nbd fixes from Josef.
- Support for cgroup info in blktrace, from Shaohua.
- Also from Shaohua, new features in the null_blk driver to allow it
to actually hold data, among other things.
- Various corner cases and error handling fixes from Weiping Zhang.
- Improvements to the IO stats tracking for blk-mq from me. Can
drastically improve performance for fast devices and/or big
machines.
- Series from Christoph removing bi_bdev as being needed for IO
submission, in preparation for nvme multipathing code.
- Series from Bart, including various cleanups and fixes for switch
fall through case complaints"
* 'for-4.14/block' of git://git.kernel.dk/linux-block: (162 commits)
kernfs: checking for IS_ERR() instead of NULL
drbd: remove BIOSET_NEED_RESCUER flag from drbd_{md_,}io_bio_set
drbd: Fix allyesconfig build, fix recent commit
drbd: switch from kmalloc() to kmalloc_array()
drbd: abort drbd_start_resync if there is no connection
drbd: move global variables to drbd namespace and make some static
drbd: rename "usermode_helper" to "drbd_usermode_helper"
drbd: fix race between handshake and admin disconnect/down
drbd: fix potential deadlock when trying to detach during handshake
drbd: A single dot should be put into a sequence.
drbd: fix rmmod cleanup, remove _all_ debugfs entries
drbd: Use setup_timer() instead of init_timer() to simplify the code.
drbd: fix potential get_ldev/put_ldev refcount imbalance during attach
drbd: new disk-option disable-write-same
drbd: Fix resource role for newly created resources in events2
drbd: mark symbols static where possible
drbd: Send P_NEG_ACK upon write error in protocol != C
drbd: add explicit plugging when submitting batches
drbd: change list_for_each_safe to while(list_first_entry_or_null)
drbd: introduce drbd_recv_header_maybe_unplug
...
Cpusets vs. suspend-resume is _completely_ broken. And it got noticed
because it now resulted in non-cpuset usage breaking too.
On suspend cpuset_cpu_inactive() doesn't call into
cpuset_update_active_cpus() because it doesn't want to move tasks about,
there is no need, all tasks are frozen and won't run again until after
we've resumed everything.
But this means that when we finally do call into
cpuset_update_active_cpus() after resuming the last frozen cpu in
cpuset_cpu_active(), the top_cpuset will not have any difference with
the cpu_active_mask and this it will not in fact do _anything_.
So the cpuset configuration will not be restored. This was largely
hidden because we would unconditionally create identity domains and
mobile users would not in fact use cpusets much. And servers what do use
cpusets tend to not suspend-resume much.
An addition problem is that we'd not in fact wait for the cpuset work to
finish before resuming the tasks, allowing spurious migrations outside
of the specified domains.
Fix the rebuild by introducing cpuset_force_rebuild() and fix the
ordering with cpuset_wait_for_hotplug().
Reported-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: <stable@vger.kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: deb7aa308e ("cpuset: reorganize CPU / memory hotplug handling")
Link: http://lkml.kernel.org/r/20170907091338.orwxrqkbfkki3c24@hirez.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
for_each_active_irq() iterates the sparse irq allocation bitmap. The caller
must hold sparse_irq_lock. Several code pathes expect that an active bit in
the sparse bitmap also has a valid interrupt descriptor.
Unfortunately that's not true. The (de)allocation is a two step process,
which holds the sparse_irq_lock only across the queue/remove from the radix
tree and the set/clear in the allocation bitmap.
If a iteration locks sparse_irq_lock between the two steps, then it might
see an active bit but the corresponding irq descriptor is NULL. If that is
dereferenced unconditionally, then the kernel oopses. Of course, all
iterator sites could be audited and fixed, but....
There is no reason why the sparse_irq_lock needs to be dropped between the
two steps, in fact the code becomes simpler when the mutex is held across
both and the semantics become more straight forward, so future problems of
missing NULL pointer checks in the iteration are avoided and all existing
sites are fixed in one go.
Expand the lock held sections so both operations are covered and the bitmap
and the radixtree are in sync.
Fixes: a05a900a51 ("genirq: Make sparse_lock a mutex")
Reported-and-tested-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Chris Wilson reported that the SMT balance rules got the +1 on the
wrong side, resulting in a bias towards the current LLC; which the
load-balancer would then try and undo.
Reported-by: Chris Wilson <chris@chris-wilson.co.uk>
Tested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Fixes: 90001d67be ("sched/fair: Fix wake_affine() for !NUMA_BALANCING")
Link: http://lkml.kernel.org/r/20170906105131.gqjmaextmn3u6tj2@hirez.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull cgroup updates from Tejun Heo:
"Several notable changes this cycle:
- Thread mode was merged. This will be used for cgroup2 support for
CPU and possibly other controllers. Unfortunately, CPU controller
cgroup2 support didn't make this pull request but most contentions
have been resolved and the support is likely to be merged before
the next merge window.
- cgroup.stat now shows the number of descendant cgroups.
- cpuset now can enable the easier-to-configure v2 behavior on v1
hierarchy"
* 'for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (21 commits)
cpuset: Allow v2 behavior in v1 cgroup
cgroup: Add mount flag to enable cpuset to use v2 behavior in v1 cgroup
cgroup: remove unneeded checks
cgroup: misc changes
cgroup: short-circuit cset_cgroup_from_root() on the default hierarchy
cgroup: re-use the parent pointer in cgroup_destroy_locked()
cgroup: add cgroup.stat interface with basic hierarchy stats
cgroup: implement hierarchy limits
cgroup: keep track of number of descent cgroups
cgroup: add comment to cgroup_enable_threaded()
cgroup: remove unnecessary empty check when enabling threaded mode
cgroup: update debug controller to print out thread mode information
cgroup: implement cgroup v2 thread support
cgroup: implement CSS_TASK_ITER_THREADED
cgroup: introduce cgroup->dom_cgrp and threaded css_set handling
cgroup: add @flags to css_task_iter_start() and implement CSS_TASK_ITER_PROCS
cgroup: reorganize cgroup.procs / task write path
cgroup: replace css_set walking populated test with testing cgrp->nr_populated_csets
cgroup: distinguish local and children populated states
cgroup: remove now unused list_head @pending in cgroup_apply_cftypes()
...
Pull workqueue updates from Tejun Heo:
"Nothing major. I introduced a flag collsion bug during v4.13 cycle
which is fixed in this pull request. Fortunately, the flag is for
debugging / verification and the bug isn't critical"
* 'for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: Fix flag collision
workqueue: Use TASK_IDLE
workqueue: fix path to documentation
workqueue: doc change for ST behavior on NUMA systems
Merge updates from Andrew Morton:
- various misc bits
- DAX updates
- OCFS2
- most of MM
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (119 commits)
mm,fork: introduce MADV_WIPEONFORK
x86,mpx: make mpx depend on x86-64 to free up VMA flag
mm: add /proc/pid/smaps_rollup
mm: hugetlb: clear target sub-page last when clearing huge page
mm: oom: let oom_reap_task and exit_mmap run concurrently
swap: choose swap device according to numa node
mm: replace TIF_MEMDIE checks by tsk_is_oom_victim
mm, oom: do not rely on TIF_MEMDIE for memory reserves access
z3fold: use per-cpu unbuddied lists
mm, swap: don't use VMA based swap readahead if HDD is used as swap
mm, swap: add sysfs interface for VMA based swap readahead
mm, swap: VMA based swap readahead
mm, swap: fix swap readahead marking
mm, swap: add swap readahead hit statistics
mm/vmalloc.c: don't reinvent the wheel but use existing llist API
mm/vmstat.c: fix wrong comment
selftests/memfd: add memfd_create hugetlbfs selftest
mm/shmem: add hugetlbfs support to memfd_create()
mm, devm_memremap_pages: use multi-order radix for ZONE_DEVICE lookups
mm/vmalloc.c: halve the number of comparisons performed in pcpu_get_vm_areas()
...
Currently trace_clock timestamps are applied to both regular and max
buffers only for global trace. For instance trace, trace_clock
timestamps are applied only to regular buffer. But, regular and max
buffers can be swapped, for example, following a snapshot. So, for
instance trace, bad timestamps can be seen following a snapshot.
Let's apply trace_clock timestamps to instance max buffer as well.
Link: http://lkml.kernel.org/r/ebdb168d0be042dcdf51f81e696b17fabe3609c1.1504642143.git.tom.zanussi@linux.intel.com
Cc: stable@vger.kernel.org
Fixes: 277ba0446 ("tracing: Add interface to allow multiple trace buffers")
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Introduce MADV_WIPEONFORK semantics, which result in a VMA being empty
in the child process after fork. This differs from MADV_DONTFORK in one
important way.
If a child process accesses memory that was MADV_WIPEONFORK, it will get
zeroes. The address ranges are still valid, they are just empty.
If a child process accesses memory that was MADV_DONTFORK, it will get a
segmentation fault, since those address ranges are no longer valid in
the child after fork.
Since MADV_DONTFORK also seems to be used to allow very large programs
to fork in systems with strict memory overcommit restrictions, changing
the semantics of MADV_DONTFORK might break existing programs.
MADV_WIPEONFORK only works on private, anonymous VMAs.
The use case is libraries that store or cache information, and want to
know that they need to regenerate it in the child process after fork.
Examples of this would be:
- systemd/pulseaudio API checks (fail after fork) (replacing a getpid
check, which is too slow without a PID cache)
- PKCS#11 API reinitialization check (mandated by specification)
- glibc's upcoming PRNG (reseed after fork)
- OpenSSL PRNG (reseed after fork)
The security benefits of a forking server having a re-inialized PRNG in
every child process are pretty obvious. However, due to libraries
having all kinds of internal state, and programs getting compiled with
many different versions of each library, it is unreasonable to expect
calling programs to re-initialize everything manually after fork.
A further complication is the proliferation of clone flags, programs
bypassing glibc's functions to call clone directly, and programs calling
unshare, causing the glibc pthread_atfork hook to not get called.
It would be better to have the kernel take care of this automatically.
The patch also adds MADV_KEEPONFORK, to undo the effects of a prior
MADV_WIPEONFORK.
This is similar to the OpenBSD minherit syscall with MAP_INHERIT_ZERO:
https://man.openbsd.org/minherit.2
[akpm@linux-foundation.org: numerically order arch/parisc/include/uapi/asm/mman.h #defines]
Link: http://lkml.kernel.org/r/20170811212829.29186-3-riel@redhat.com
Signed-off-by: Rik van Riel <riel@redhat.com>
Reported-by: Florian Weimer <fweimer@redhat.com>
Reported-by: Colm MacCártaigh <colm@allcosts.net>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Helge Deller <deller@gmx.de>
Cc: Kees Cook <keescook@chromium.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Drewry <wad@chromium.org>
Cc: <linux-api@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is purely required because exit_aio() may block and exit_mmap() may
never start, if the oom_reap_task cannot start running on a mm with
mm_users == 0.
At the same time if the OOM reaper doesn't wait at all for the memory of
the current OOM candidate to be freed by exit_mmap->unmap_vmas, it would
generate a spurious OOM kill.
If it wasn't because of the exit_aio or similar blocking functions in
the last mmput, it would be enough to change the oom_reap_task() in the
case it finds mm_users == 0, to wait for a timeout or to wait for
__mmput to set MMF_OOM_SKIP itself, but it's not just exit_mmap the
problem here so the concurrency of exit_mmap and oom_reap_task is
apparently warranted.
It's a non standard runtime, exit_mmap() runs without mmap_sem, and
oom_reap_task runs with the mmap_sem for reading as usual (kind of
MADV_DONTNEED).
The race between the two is solved with a combination of
tsk_is_oom_victim() (serialized by task_lock) and MMF_OOM_SKIP
(serialized by a dummy down_write/up_write cycle on the same lines of
the ksm_exit method).
If the oom_reap_task() may be running concurrently during exit_mmap,
exit_mmap will wait it to finish in down_write (before taking down mm
structures that would make the oom_reap_task fail with use after free).
If exit_mmap comes first, oom_reap_task() will skip the mm if
MMF_OOM_SKIP is already set and in turn all memory is already freed and
furthermore the mm data structures may already have been taken down by
free_pgtables.
[aarcange@redhat.com: incremental one liner]
Link: http://lkml.kernel.org/r/20170726164319.GC29716@redhat.com
[rientjes@google.com: remove unused mmput_async]
Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1708141733130.50317@chino.kir.corp.google.com
[aarcange@redhat.com: microoptimization]
Link: http://lkml.kernel.org/r/20170817171240.GB5066@redhat.com
Link: http://lkml.kernel.org/r/20170726162912.GA29716@redhat.com
Fixes: 26db62f179 ("oom: keep mm of the killed task available")
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Reported-by: David Rientjes <rientjes@google.com>
Tested-by: David Rientjes <rientjes@google.com>
Reviewed-by: Michal Hocko <mhocko@suse.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
TIF_MEMDIE is set only to the tasks whick were either directly selected
by the OOM killer or passed through mark_oom_victim from the allocator
path. tsk_is_oom_victim is more generic and allows to identify all
tasks (threads) which share the mm with the oom victim.
Please note that the freezer still needs to check TIF_MEMDIE because we
cannot thaw tasks which do not participage in oom_victims counting
otherwise a !TIF_MEMDIE task could interfere after oom_disbale returns.
Link: http://lkml.kernel.org/r/20170810075019.28998-3-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: David Rientjes <rientjes@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
devm_memremap_pages() records mapped ranges in pgmap_radix with an entry
per section's worth of memory (128MB). The key for each of those
entries is a section number.
This leads to false positives when devm_memremap_pages() is passed a
section-unaligned range as lookups in the misalignment fail to return
NULL. We can close this hole by using the pfn as the key for entries in
the tree. The number of entries required to describe a remapped range
is reduced by leveraging multi-order entries.
In practice this approach usually yields just one entry in the tree if
the size and starting address are of the same power-of-2 alignment.
Previously we always needed nr_entries = mapping_size / 128MB.
Link: https://lists.01.org/pipermail/linux-nvdimm/2016-August/006666.html
Link: http://lkml.kernel.org/r/150215410565.39310.13767886055248249438.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reported-by: Toshi Kani <toshi.kani@hpe.com>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit fa06235b8e ("cgroup: reset css on destruction") caused
css_reset callback to be called from the offlining path. Although it
solves the problem mentioned in the commit description ("For instance,
memory cgroup needs to reset memory.low, otherwise pages charged to a
dead cgroup might never get reclaimed."), generally speaking, it's not
correct.
An offline cgroup can still be a resource domain, and we shouldn't grant
it more resources than it had before deletion.
For instance, if an offline memory cgroup has dirty pages, we should
still imply i/o limits during writeback.
The css_reset callback is designed to return the cgroup state into the
original state, that means reset all limits and counters. It's
spomething different from the offlining, and we shouldn't use it from
the offlining path. Instead, we should adjust necessary settings from
the per-controller css_offline callbacks (e.g. reset memory.low).
Link: http://lkml.kernel.org/r/20170727130428.28856-2-guro@fb.com
Signed-off-by: Roman Gushchin <guro@fb.com>
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull networking updates from David Miller:
1) Support ipv6 checksum offload in sunvnet driver, from Shannon
Nelson.
2) Move to RB-tree instead of custom AVL code in inetpeer, from Eric
Dumazet.
3) Allow generic XDP to work on virtual devices, from John Fastabend.
4) Add bpf device maps and XDP_REDIRECT, which can be used to build
arbitrary switching frameworks using XDP. From John Fastabend.
5) Remove UFO offloads from the tree, gave us little other than bugs.
6) Remove the IPSEC flow cache, from Florian Westphal.
7) Support ipv6 route offload in mlxsw driver.
8) Support VF representors in bnxt_en, from Sathya Perla.
9) Add support for forward error correction modes to ethtool, from
Vidya Sagar Ravipati.
10) Add time filter for packet scheduler action dumping, from Jamal Hadi
Salim.
11) Extend the zerocopy sendmsg() used by virtio and tap to regular
sockets via MSG_ZEROCOPY. From Willem de Bruijn.
12) Significantly rework value tracking in the BPF verifier, from Edward
Cree.
13) Add new jump instructions to eBPF, from Daniel Borkmann.
14) Rework rtnetlink plumbing so that operations can be run without
taking the RTNL semaphore. From Florian Westphal.
15) Support XDP in tap driver, from Jason Wang.
16) Add 32-bit eBPF JIT for ARM, from Shubham Bansal.
17) Add Huawei hinic ethernet driver.
18) Allow to report MD5 keys in TCP inet_diag dumps, from Ivan
Delalande.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1780 commits)
i40e: point wb_desc at the nvm_wb_desc during i40e_read_nvm_aq
i40e: avoid NVM acquire deadlock during NVM update
drivers: net: xgene: Remove return statement from void function
drivers: net: xgene: Configure tx/rx delay for ACPI
drivers: net: xgene: Read tx/rx delay for ACPI
rocker: fix kcalloc parameter order
rds: Fix non-atomic operation on shared flag variable
net: sched: don't use GFP_KERNEL under spin lock
vhost_net: correctly check tx avail during rx busy polling
net: mdio-mux: add mdio_mux parameter to mdio_mux_init()
rxrpc: Make service connection lookup always check for retry
net: stmmac: Delete dead code for MDIO registration
gianfar: Fix Tx flow control deactivation
cxgb4: Ignore MPS_TX_INT_CAUSE[Bubble] for T6
cxgb4: Fix pause frame count in t4_get_port_stats
cxgb4: fix memory leak
tun: rename generic_xdp to skb_xdp
tun: reserve extra headroom only when XDP is set
net: dsa: bcm_sf2: Configure IMP port TC2QOS mapping
net: dsa: bcm_sf2: Advertise number of egress queues
...
On allocating the interrupts routed via a wire-to-MSI bridge, the allocator
iterates over the MSI descriptors to build the hierarchy, but fails to use
the descriptor interrupt number, and instead uses the base number,
generating the wrong IRQ domain mappings.
The fix is to use the MSI descriptor interrupt number when setting up
the interrupt instead of the base interrupt for the allocation range.
The only saving grace is that although the MSI descriptors are allocated
in bulk, the wired interrupts are only allocated one by one (so
desc->irq == virq) and the bug went unnoticed so far.
Fixes: 2145ac9310 ("genirq/msi: Add msi_domain_populate_irqs")
Signed-off-by: John Keeping <john@metanate.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/20170906103540.373864a2.john@metanate.com
- Introduce fwnode operations for all of the separate types of
"firmware nodes" that can be handled by the device properties
framework and drop the type field from struct fwnode_handle
(Sakari Ailus, Arnd Bergmann).
- Make the device properties framework use const fwnode arguments
where possible (Sakari Ailus).
- Add a helper for the consolidated handling of node references
to the device properties framework (Sakari Ailus).
- Switch over the ACPI part of the device properties framework
to the new UUID API (Andy Shevchenko).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=0rnk
-----END PGP SIGNATURE-----
Merge tag 'devprop-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull device properties framework updates from Rafael Wysocki:
"These introduce fwnode operations for all of the separate types of
'firmware nodes' that can be handled by the device properties
framework, make the framework use const fwnode arguments all over, add
a helper for the consolidated handling of node references and switch
over the framework to the new UUID API.
Specifics:
- Introduce fwnode operations for all of the separate types of
'firmware nodes' that can be handled by the device properties
framework and drop the type field from struct fwnode_handle (Sakari
Ailus, Arnd Bergmann).
- Make the device properties framework use const fwnode arguments
where possible (Sakari Ailus).
- Add a helper for the consolidated handling of node references to
the device properties framework (Sakari Ailus).
- Switch over the ACPI part of the device properties framework to the
new UUID API (Andy Shevchenko)"
* tag 'devprop-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: device property: Switch to use new generic UUID API
device property: export irqchip_fwnode_ops
device property: Introduce fwnode_property_get_reference_args
device property: Constify fwnode property API
device property: Constify argument to pset fwnode backend
ACPI: Constify internal fwnode arguments
ACPI: Constify acpi_bus helper functions, switch to macros
ACPI: Prepare for constifying acpi_get_next_subnode() fwnode argument
device property: Get rid of struct fwnode_handle type field
ACPI: Use IS_ERR_OR_NULL() instead of non-NULL check in is_acpi_data_node()
- Drop the P-state selection algorithm based on a PID controller
from intel_pstate and make it use the same P-state selection
method (based on the CPU load) for all types of systems in the
active mode (Rafael Wysocki, Srinivas Pandruvada).
- Rework the cpufreq core and governors to make it possible to
take cross-CPU utilization updates into account and modify the
schedutil governor to actually do so (Viresh Kumar).
- Clean up the handling of transition latency information in the
cpufreq core and untangle it from the information on which drivers
cannot do dynamic frequency switching (Viresh Kumar).
- Add support for new SoCs (MT2701/MT7623 and MT7622) to the
mediatek cpufreq driver and update its DT bindings (Sean Wang).
- Modify the cpufreq dt-platdev driver to autimatically create
cpufreq devices for the new (v2) Operating Performance Points
(OPP) DT bindings and update its whitelist of supported systems
(Viresh Kumar, Shubhrajyoti Datta, Marc Gonzalez, Khiem Nguyen,
Finley Xiao).
- Add support for Ux500 to the cpufreq-dt driver and drop the
obsolete dbx500 cpufreq driver (Linus Walleij, Arnd Bergmann).
- Add new SoC (R8A7795) support to the cpufreq rcar driver (Khiem
Nguyen).
- Fix and clean up assorted issues in the cpufreq drivers and core
(Arvind Yadav, Christophe Jaillet, Colin Ian King, Gustavo Silva,
Julia Lawall, Leonard Crestez, Rob Herring, Sudeep Holla).
- Update the IO-wait boost handling in the schedutil governor to
make it less aggressive (Joel Fernandes).
- Rework system suspend diagnostics to make it print fewer messages
to the kernel log by default, add a sysfs knob to allow more
suspend-related messages to be printed and add Low Power S0 Idle
constraints checks to the ACPI suspend-to-idle code (Rafael
Wysocki, Srinivas Pandruvada).
- Prefer suspend-to-idle over S3 on ACPI-based systems with the
ACPI_FADT_LOW_POWER_S0 flag set and the Low Power Idle S0 _DSM
interface present in the ACPI tables (Rafael Wysocki).
- Update documentation related to system sleep and rename a number
of items in the code to make it cleare that they are related to
suspend-to-idle (Rafael Wysocki).
- Export a variable allowing device drivers to check the target
system sleep state from the core system suspend code (Florian
Fainelli).
- Clean up the cpuidle subsystem to handle the polling state on
x86 in a more straightforward way and to use %pOF instead of
full_name (Rafael Wysocki, Rob Herring).
- Update the devfreq framework to fix and clean up a few minor
issues (Chanwoo Choi, Rob Herring).
- Extend diagnostics in the generic power domains (genpd) framework
and clean it up slightly (Thara Gopinath, Rob Herring).
- Fix and clean up a couple of issues in the operating performance
points (OPP) framework (Viresh Kumar, Waldemar Rymarkiewicz).
- Add support for RV1108 to the rockchip-io Adaptive Voltage Scaling
(AVS) driver (David Wu).
- Fix the usage of notifiers in CPU power management on some
platforms (Alex Shi).
- Update the pm-graph system suspend/hibernation and boot profiling
utility (Todd Brandt).
- Make it possible to run the cpupower utility without CPU0 (Prarit
Bhargava).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=mAiV
-----END PGP SIGNATURE-----
Merge tag 'pm-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"This time (again) cpufreq gets the majority of changes which mostly
are driver updates (including a major consolidation of intel_pstate),
some schedutil governor modifications and core cleanups.
There also are some changes in the system suspend area, mostly related
to diagnostics and debug messages plus some renames of things related
to suspend-to-idle. One major change here is that suspend-to-idle is
now going to be preferred over S3 on systems where the ACPI tables
indicate to do so and provide requsite support (the Low Power Idle S0
_DSM in particular). The system sleep documentation and the tools
related to it are updated too.
The rest is a few cpuidle changes (nothing major), devfreq updates,
generic power domains (genpd) framework updates and a few assorted
modifications elsewhere.
Specifics:
- Drop the P-state selection algorithm based on a PID controller from
intel_pstate and make it use the same P-state selection method
(based on the CPU load) for all types of systems in the active mode
(Rafael Wysocki, Srinivas Pandruvada).
- Rework the cpufreq core and governors to make it possible to take
cross-CPU utilization updates into account and modify the schedutil
governor to actually do so (Viresh Kumar).
- Clean up the handling of transition latency information in the
cpufreq core and untangle it from the information on which drivers
cannot do dynamic frequency switching (Viresh Kumar).
- Add support for new SoCs (MT2701/MT7623 and MT7622) to the mediatek
cpufreq driver and update its DT bindings (Sean Wang).
- Modify the cpufreq dt-platdev driver to autimatically create
cpufreq devices for the new (v2) Operating Performance Points (OPP)
DT bindings and update its whitelist of supported systems (Viresh
Kumar, Shubhrajyoti Datta, Marc Gonzalez, Khiem Nguyen, Finley
Xiao).
- Add support for Ux500 to the cpufreq-dt driver and drop the
obsolete dbx500 cpufreq driver (Linus Walleij, Arnd Bergmann).
- Add new SoC (R8A7795) support to the cpufreq rcar driver (Khiem
Nguyen).
- Fix and clean up assorted issues in the cpufreq drivers and core
(Arvind Yadav, Christophe Jaillet, Colin Ian King, Gustavo Silva,
Julia Lawall, Leonard Crestez, Rob Herring, Sudeep Holla).
- Update the IO-wait boost handling in the schedutil governor to make
it less aggressive (Joel Fernandes).
- Rework system suspend diagnostics to make it print fewer messages
to the kernel log by default, add a sysfs knob to allow more
suspend-related messages to be printed and add Low Power S0 Idle
constraints checks to the ACPI suspend-to-idle code (Rafael
Wysocki, Srinivas Pandruvada).
- Prefer suspend-to-idle over S3 on ACPI-based systems with the
ACPI_FADT_LOW_POWER_S0 flag set and the Low Power Idle S0 _DSM
interface present in the ACPI tables (Rafael Wysocki).
- Update documentation related to system sleep and rename a number of
items in the code to make it cleare that they are related to
suspend-to-idle (Rafael Wysocki).
- Export a variable allowing device drivers to check the target
system sleep state from the core system suspend code (Florian
Fainelli).
- Clean up the cpuidle subsystem to handle the polling state on x86
in a more straightforward way and to use %pOF instead of full_name
(Rafael Wysocki, Rob Herring).
- Update the devfreq framework to fix and clean up a few minor issues
(Chanwoo Choi, Rob Herring).
- Extend diagnostics in the generic power domains (genpd) framework
and clean it up slightly (Thara Gopinath, Rob Herring).
- Fix and clean up a couple of issues in the operating performance
points (OPP) framework (Viresh Kumar, Waldemar Rymarkiewicz).
- Add support for RV1108 to the rockchip-io Adaptive Voltage Scaling
(AVS) driver (David Wu).
- Fix the usage of notifiers in CPU power management on some
platforms (Alex Shi).
- Update the pm-graph system suspend/hibernation and boot profiling
utility (Todd Brandt).
- Make it possible to run the cpupower utility without CPU0 (Prarit
Bhargava)"
* tag 'pm-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (87 commits)
cpuidle: Make drivers initialize polling state
cpuidle: Move polling state initialization code to separate file
cpuidle: Eliminate the CPUIDLE_DRIVER_STATE_START symbol
cpufreq: imx6q: Fix imx6sx low frequency support
cpufreq: speedstep-lib: make several arrays static, makes code smaller
PM: docs: Delete the obsolete states.txt document
PM: docs: Describe high-level PM strategies and sleep states
PM / devfreq: Fix memory leak when fail to register device
PM / devfreq: Add dependency on PM_OPP
PM / devfreq: Move private devfreq_update_stats() into devfreq
PM / devfreq: Convert to using %pOF instead of full_name
PM / AVS: rockchip-io: add io selectors and supplies for RV1108
cpufreq: ti: Fix 'of_node_put' being called twice in error handling path
cpufreq: dt-platdev: Drop few entries from whitelist
cpufreq: dt-platdev: Automatically create cpufreq device with OPP v2
ARM: ux500: don't select CPUFREQ_DT
cpuidle: Convert to using %pOF instead of full_name
cpufreq: Convert to using %pOF instead of full_name
PM / Domains: Convert to using %pOF instead of full_name
cpufreq: Cap the default transition delay value to 10 ms
...
Here is the big char/misc driver update for 4.14-rc1.
Lots of different stuff in here, it's been an active development cycle
for some reason. Highlights are:
- updated binder driver, this brings binder up to date with what
shipped in the Android O release, plus some more changes that
happened since then that are in the Android development trees.
- coresight updates and fixes
- mux driver file renames to be a bit "nicer"
- intel_th driver updates
- normal set of hyper-v updates and changes
- small fpga subsystem and driver updates
- lots of const code changes all over the driver trees
- extcon driver updates
- fmc driver subsystem upadates
- w1 subsystem minor reworks and new features and drivers added
- spmi driver updates
Plus a smattering of other minor driver updates and fixes.
All of these have been in linux-next with no reported issues for a
while.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWa1+Ew8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yl26wCgquufNylfhxr65NbJrovduJYzRnUAniCivXg8
bePIh/JI5WxWoHK+wEbY
=hYWx
-----END PGP SIGNATURE-----
Merge tag 'char-misc-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the big char/misc driver update for 4.14-rc1.
Lots of different stuff in here, it's been an active development cycle
for some reason. Highlights are:
- updated binder driver, this brings binder up to date with what
shipped in the Android O release, plus some more changes that
happened since then that are in the Android development trees.
- coresight updates and fixes
- mux driver file renames to be a bit "nicer"
- intel_th driver updates
- normal set of hyper-v updates and changes
- small fpga subsystem and driver updates
- lots of const code changes all over the driver trees
- extcon driver updates
- fmc driver subsystem upadates
- w1 subsystem minor reworks and new features and drivers added
- spmi driver updates
Plus a smattering of other minor driver updates and fixes.
All of these have been in linux-next with no reported issues for a
while"
* tag 'char-misc-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (244 commits)
ANDROID: binder: don't queue async transactions to thread.
ANDROID: binder: don't enqueue death notifications to thread todo.
ANDROID: binder: Don't BUG_ON(!spin_is_locked()).
ANDROID: binder: Add BINDER_GET_NODE_DEBUG_INFO ioctl
ANDROID: binder: push new transactions to waiting threads.
ANDROID: binder: remove proc waitqueue
android: binder: Add page usage in binder stats
android: binder: fixup crash introduced by moving buffer hdr
drivers: w1: add hwmon temp support for w1_therm
drivers: w1: refactor w1_slave_show to make the temp reading functionality separate
drivers: w1: add hwmon support structures
eeprom: idt_89hpesx: Support both ACPI and OF probing
mcb: Fix an error handling path in 'chameleon_parse_cells()'
MCB: add support for SC31 to mcb-lpc
mux: make device_type const
char: virtio: constify attribute_group structures.
Documentation/ABI: document the nvmem sysfs files
lkdtm: fix spelling mistake: "incremeted" -> "incremented"
perf: cs-etm: Fix ETMv4 CONFIGR entry in perf.data file
nvmem: include linux/err.h from header
...
- VMAP_STACK support, allowing the kernel stacks to be allocated in
the vmalloc space with a guard page for trapping stack overflows. One
of the patches introduces THREAD_ALIGN and changes the generic
alloc_thread_stack_node() to use this instead of THREAD_SIZE (no
functional change for other architectures)
- Contiguous PTE hugetlb support re-enabled (after being reverted a
couple of times). We now have the semantics agreed in the generic mm
layer together with API improvements so that the architecture code can
detect between contiguous and non-contiguous huge PTEs
- Initial support for persistent memory on ARM: DC CVAP instruction
exposed to user space (HWCAP) and the in-kernel pmem API implemented
- raid6 improvements for arm64: faster algorithm for the delta syndrome
and implementation of the recovery routines using Neon
- FP/SIMD refactoring and removal of support for Neon in interrupt
context. This is in preparation for full SVE support
- PTE accessors converted from inline asm to cmpxchg so that we can
use LSE atomics if available (ARMv8.1)
- Perf support for Cortex-A35 and A73
- Non-urgent fixes and cleanups
-----BEGIN PGP SIGNATURE-----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=vd0/
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
- VMAP_STACK support, allowing the kernel stacks to be allocated in the
vmalloc space with a guard page for trapping stack overflows. One of
the patches introduces THREAD_ALIGN and changes the generic
alloc_thread_stack_node() to use this instead of THREAD_SIZE (no
functional change for other architectures)
- Contiguous PTE hugetlb support re-enabled (after being reverted a
couple of times). We now have the semantics agreed in the generic mm
layer together with API improvements so that the architecture code
can detect between contiguous and non-contiguous huge PTEs
- Initial support for persistent memory on ARM: DC CVAP instruction
exposed to user space (HWCAP) and the in-kernel pmem API implemented
- raid6 improvements for arm64: faster algorithm for the delta syndrome
and implementation of the recovery routines using Neon
- FP/SIMD refactoring and removal of support for Neon in interrupt
context. This is in preparation for full SVE support
- PTE accessors converted from inline asm to cmpxchg so that we can use
LSE atomics if available (ARMv8.1)
- Perf support for Cortex-A35 and A73
- Non-urgent fixes and cleanups
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (75 commits)
arm64: cleanup {COMPAT_,}SET_PERSONALITY() macro
arm64: introduce separated bits for mm_context_t flags
arm64: hugetlb: Cleanup setup_hugepagesz
arm64: Re-enable support for contiguous hugepages
arm64: hugetlb: Override set_huge_swap_pte_at() to support contiguous hugepages
arm64: hugetlb: Override huge_pte_clear() to support contiguous hugepages
arm64: hugetlb: Handle swap entries in huge_pte_offset() for contiguous hugepages
arm64: hugetlb: Add break-before-make logic for contiguous entries
arm64: hugetlb: Spring clean huge pte accessors
arm64: hugetlb: Introduce pte_pgprot helper
arm64: hugetlb: set_huge_pte_at Add WARN_ON on !pte_present
arm64: kexec: have own crash_smp_send_stop() for crash dump for nonpanic cores
arm64: dma-mapping: Mark atomic_pool as __ro_after_init
arm64: dma-mapping: Do not pass data to gen_pool_set_algo()
arm64: Remove the !CONFIG_ARM64_HW_AFDBM alternative code paths
arm64: Ignore hardware dirty bit updates in ptep_set_wrprotect()
arm64: Move PTE_RDONLY bit handling out of set_pte_at()
kvm: arm64: Convert kvm_set_s2pte_readonly() from inline asm to cmpxchg()
arm64: Convert pte handling from inline asm to using (cmp)xchg
arm64: neon/efi: Make EFI fpsimd save/restore variables static
...
When disabling one trace event, the RECORDED_TGID flag in the event
file is not correctly cleared. It's clearing RECORDED_CMD flag when
it should clear RECORDED_TGID flag.
Link: http://lkml.kernel.org/r/1504589806-8425-1-git-send-email-chuhu@redhat.com
Cc: Joel Fernandes <joelaf@google.com>
Cc: stable@vger.kernel.org
Fixes: d914ba37d7 ("tracing: Add support for recording tgid of tasks")
Signed-off-by: Chunyu Hu <chuhu@redhat.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
trace_printk() uses 4 buffers, one for each context (normal, softirq, irq
and NMI), such that it does not need to worry about one context preempting
the other. There's a nesting counter that gets incremented to figure out
which buffer to use. If the context gets preempted by another context which
calls trace_printk() it will increment the counter and use the next buffer,
and restore the counter when it is finished.
The problem is that gcc may optimize the modification of the buffer nesting
counter and it may not be incremented in memory before the buffer is used.
If this happens, and the context gets interrupted by another context, it
could pick the same buffer and corrupt the one that is being used.
Compiler barriers need to be added after the nesting variable is incremented
and before it is decremented to prevent usage of the context buffers by more
than one context at the same time.
Cc: Andy Lutomirski <luto@kernel.org>
Cc: stable@vger.kernel.org
Fixes: e2ace00117 ("tracing: Choose static tp_printk buffer by explicit nesting count")
Hat-tip-to: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Commit 2115bb250f ("audit: Use timespec64 to represent audit timestamps")
noted that audit timestamps were not y2038 safe and used a 64-bit
timestamp. In itself, this makes sense but the conversion was from
CURRENT_TIME to ktime_get_real_ts64() which is a heavier call to record
an accurate timestamp which is required in some, but not all, cases. The
impact is that when auditd is running without any rules that all syscalls
have higher overhead. This is visible in the sysbench-thread benchmark as
a 11.5% performance hit. That benchmark is dumb as rocks but it's also
visible in redis as an 8-10% hit on all operations which is of greater
concern. It is somewhat stupid of audit to track syscalls without any
rules related to syscalls but that is how it behaves.
The overhead can be directly measured with perf comparing 4.9 with 4.12
4.9
7.76% sysbench [kernel.vmlinux] [k] __schedule
7.62% sysbench [kernel.vmlinux] [k] _raw_spin_lock
7.37% sysbench libpthread-2.22.so [.] __lll_lock_elision
7.29% sysbench [kernel.vmlinux] [.] syscall_return_via_sysret
6.59% sysbench [kernel.vmlinux] [k] native_sched_clock
5.21% sysbench libc-2.22.so [.] __sched_yield
4.38% sysbench [kernel.vmlinux] [k] entry_SYSCALL_64
4.28% sysbench [kernel.vmlinux] [k] do_syscall_64
3.49% sysbench libpthread-2.22.so [.] __lll_unlock_elision
3.13% sysbench [kernel.vmlinux] [k] __audit_syscall_exit
2.87% sysbench [kernel.vmlinux] [k] update_curr
2.73% sysbench [kernel.vmlinux] [k] pick_next_task_fair
2.31% sysbench [kernel.vmlinux] [k] syscall_trace_enter
2.20% sysbench [kernel.vmlinux] [k] __audit_syscall_entry
.....
0.00% swapper [kernel.vmlinux] [k] read_tsc
4.12
7.84% sysbench [kernel.vmlinux] [k] __schedule
7.05% sysbench [kernel.vmlinux] [k] _raw_spin_lock
6.57% sysbench libpthread-2.22.so [.] __lll_lock_elision
6.50% sysbench [kernel.vmlinux] [.] syscall_return_via_sysret
5.95% sysbench [kernel.vmlinux] [k] read_tsc
5.71% sysbench [kernel.vmlinux] [k] native_sched_clock
4.78% sysbench libc-2.22.so [.] __sched_yield
4.30% sysbench [kernel.vmlinux] [k] entry_SYSCALL_64
3.94% sysbench [kernel.vmlinux] [k] do_syscall_64
3.37% sysbench libpthread-2.22.so [.] __lll_unlock_elision
3.32% sysbench [kernel.vmlinux] [k] __audit_syscall_exit
2.91% sysbench [kernel.vmlinux] [k] __getnstimeofday64
Note the additional overhead from read_tsc which goes from 0% to 5.95%.
This is on a single-socket E3-1230 but similar overheads have been measured
on an older machine which the patch also eliminates.
The patch in question has no explanation as to why a fully-accurate timestamp
is required and is likely an oversight. Using a coarser, but monotically
increasing, timestamp the overhead can be eliminated. While it can be
worked around by configuring or disabling audit, it's tricky enough to
detect that a kernel fix is justified. With this patch, we see the following;
sysbenchthread
4.9.0 4.12.0 4.12.0
vanilla vanilla coarse-v1r1
Amean 1 1.49 ( 0.00%) 1.66 ( -11.42%) 1.51 ( -1.34%)
Amean 3 1.48 ( 0.00%) 1.65 ( -11.45%) 1.50 ( -0.96%)
Amean 5 1.49 ( 0.00%) 1.67 ( -12.31%) 1.51 ( -1.83%)
Amean 7 1.49 ( 0.00%) 1.66 ( -11.72%) 1.50 ( -0.67%)
Amean 12 1.48 ( 0.00%) 1.65 ( -11.57%) 1.52 ( -2.89%)
Amean 16 1.49 ( 0.00%) 1.65 ( -11.13%) 1.51 ( -1.73%)
The benchmark is reporting the time required for different thread counts to
lock/unlock a private mutex which, while dense, demonstrates the syscall
overhead. This is showing that 4.12 took a 11-12% hit but the overhead is
almost eliminated by the patch. While the variance is not reported here,
it's well within the noise with the patch applied.
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Deepa Dinamani <deepa.kernel@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
This matches kernel_read and kernel_write and avoids any need for casts in
the callers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Make the position an in/out argument like all the other read/write
helpers and and make the buf argument a void pointer.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Use proper ssize_t and size_t types for the return value and count
argument, move the offset last and make it an in/out argument like
all other read/write helpers, and make the buf argument a void pointer
to get rid of lots of casts in the callers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Pull x86 cache quality monitoring update from Thomas Gleixner:
"This update provides a complete rewrite of the Cache Quality
Monitoring (CQM) facility.
The existing CQM support was duct taped into perf with a lot of issues
and the attempts to fix those turned out to be incomplete and
horrible.
After lengthy discussions it was decided to integrate the CQM support
into the Resource Director Technology (RDT) facility, which is the
obvious choise as in hardware CQM is part of RDT. This allowed to add
Memory Bandwidth Monitoring support on top.
As a result the mechanisms for allocating cache/memory bandwidth and
the corresponding monitoring mechanisms are integrated into a single
management facility with a consistent user interface"
* 'x86-cache-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (37 commits)
x86/intel_rdt: Turn off most RDT features on Skylake
x86/intel_rdt: Add command line options for resource director technology
x86/intel_rdt: Move special case code for Haswell to a quirk function
x86/intel_rdt: Remove redundant ternary operator on return
x86/intel_rdt/cqm: Improve limbo list processing
x86/intel_rdt/mbm: Fix MBM overflow handler during CPU hotplug
x86/intel_rdt: Modify the intel_pqr_state for better performance
x86/intel_rdt/cqm: Clear the default RMID during hotcpu
x86/intel_rdt: Show bitmask of shareable resource with other executing units
x86/intel_rdt/mbm: Handle counter overflow
x86/intel_rdt/mbm: Add mbm counter initialization
x86/intel_rdt/mbm: Basic counting of MBM events (total and local)
x86/intel_rdt/cqm: Add CPU hotplug support
x86/intel_rdt/cqm: Add sched_in support
x86/intel_rdt: Introduce rdt_enable_key for scheduling
x86/intel_rdt/cqm: Add mount,umount support
x86/intel_rdt/cqm: Add rmdir support
x86/intel_rdt: Separate the ctrl bits from rmdir
x86/intel_rdt/cqm: Add mon_data
x86/intel_rdt: Prepare for RDT monitor data support
...
Pull CPU hotplug fix from Thomas Gleixner:
"A single fix to handle the removal of the first dynamic CPU hotplug
state correctly"
* 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
smp/hotplug: Handle removal correctly in cpuhp_store_callbacks()
Pull irq updates from Thomas Gleixner:
"The interrupt subsystem delivers this time:
- Refactoring of the GIC-V3 driver to prepare for the GIC-V4 support
- Initial GIC-V4 support
- Consolidation of the FSL MSI support
- Utilize the effective affinity interface in various ARM irqchip
drivers
- Yet another interrupt chip driver (UniPhier AIDET)
- Bulk conversion of the irq chip driver to use %pOF
- The usual small fixes and improvements all over the place"
* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (77 commits)
irqchip/ls-scfg-msi: Add MSI affinity support
irqchip/ls-scfg-msi: Add LS1043a v1.1 MSI support
irqchip/ls-scfg-msi: Add LS1046a MSI support
arm64: dts: ls1046a: Add MSI dts node
arm64: dts: ls1043a: Share all MSIs
arm: dts: ls1021a: Share all MSIs
arm64: dts: ls1043a: Fix typo of MSI compatible string
arm: dts: ls1021a: Fix typo of MSI compatible string
irqchip/ls-scfg-msi: Fix typo of MSI compatible strings
irqchip/irq-bcm7120-l2: Use correct I/O accessors for irq_fwd_mask
irqchip/mmp: Make mmp_intc_conf const
irqchip/gic: Make irq_chip const
irqchip/gic-v3: Advertise GICv4 support to KVM
irqchip/gic-v4: Enable low-level GICv4 operations
irqchip/gic-v4: Add some basic documentation
irqchip/gic-v4: Add VLPI configuration interface
irqchip/gic-v4: Add VPE command interface
irqchip/gic-v4: Add per-VM VPE domain creation
irqchip/gic-v3-its: Set implementation defined bit to enable VLPIs
irqchip/gic-v3-its: Allow doorbell interrupts to be injected/cleared
...
Pull timer fixes from Thomas Gleixner:
"A rather small update for the time(r) subsystem:
- A new clocksource driver IMX-TPM
- Minor fixes to the alarmtimer facility
- Device tree cleanups for Renesas drivers
- A new kselftest and fixes for the timer related tests
- Conversion of the clocksource drivers to use %pOF
- Use the proper helpers to access rlimits in the posix-cpu-timer
code"
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
alarmtimer: Ensure RTC module is not unloaded
clocksource: Convert to using %pOF instead of full_name
clocksource/drivers/bcm2835: Remove message for a memory allocation failure
devicetree: bindings: Remove deprecated properties
devicetree: bindings: Remove unused 32-bit CMT bindings
devicetree: bindings: Deprecate property, update example
devicetree: bindings: r8a73a4 and R-Car Gen2 CMT bindings
devicetree: bindings: R-Car Gen2 CMT0 and CMT1 bindings
devicetree: bindings: Remove sh7372 CMT binding
clocksource/drivers/imx-tpm: Add imx tpm timer support
dt-bindings: timer: Add nxp tpm timer binding doc
posix-cpu-timers: Use dedicated helper to access rlimit values
alarmtimer: Fix unavailable wake-up source in sysfs
timekeeping: Use proper timekeeper for debug code
kselftests: timers: set-timer-lat: Add one-shot timer test cases
kselftests: timers: set-timer-lat: Tweak reporting when timer fires early
kselftests: timers: freq-step: Fix build warning
kselftests: timers: freq-step: Define ADJ_SETOFFSET if device has older kernel headers
Pull x86 mm changes from Ingo Molnar:
"PCID support, 5-level paging support, Secure Memory Encryption support
The main changes in this cycle are support for three new, complex
hardware features of x86 CPUs:
- Add 5-level paging support, which is a new hardware feature on
upcoming Intel CPUs allowing up to 128 PB of virtual address space
and 4 PB of physical RAM space - a 512-fold increase over the old
limits. (Supercomputers of the future forecasting hurricanes on an
ever warming planet can certainly make good use of more RAM.)
Many of the necessary changes went upstream in previous cycles,
v4.14 is the first kernel that can enable 5-level paging.
This feature is activated via CONFIG_X86_5LEVEL=y - disabled by
default.
(By Kirill A. Shutemov)
- Add 'encrypted memory' support, which is a new hardware feature on
upcoming AMD CPUs ('Secure Memory Encryption', SME) allowing system
RAM to be encrypted and decrypted (mostly) transparently by the
CPU, with a little help from the kernel to transition to/from
encrypted RAM. Such RAM should be more secure against various
attacks like RAM access via the memory bus and should make the
radio signature of memory bus traffic harder to intercept (and
decrypt) as well.
This feature is activated via CONFIG_AMD_MEM_ENCRYPT=y - disabled
by default.
(By Tom Lendacky)
- Enable PCID optimized TLB flushing on newer Intel CPUs: PCID is a
hardware feature that attaches an address space tag to TLB entries
and thus allows to skip TLB flushing in many cases, even if we
switch mm's.
(By Andy Lutomirski)
All three of these features were in the works for a long time, and
it's coincidence of the three independent development paths that they
are all enabled in v4.14 at once"
* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (65 commits)
x86/mm: Enable RCU based page table freeing (CONFIG_HAVE_RCU_TABLE_FREE=y)
x86/mm: Use pr_cont() in dump_pagetable()
x86/mm: Fix SME encryption stack ptr handling
kvm/x86: Avoid clearing the C-bit in rsvd_bits()
x86/CPU: Align CR3 defines
x86/mm, mm/hwpoison: Clear PRESENT bit for kernel 1:1 mappings of poison pages
acpi, x86/mm: Remove encryption mask from ACPI page protection type
x86/mm, kexec: Fix memory corruption with SME on successive kexecs
x86/mm/pkeys: Fix typo in Documentation/x86/protection-keys.txt
x86/mm/dump_pagetables: Speed up page tables dump for CONFIG_KASAN=y
x86/mm: Implement PCID based optimization: try to preserve old TLB entries using PCID
x86: Enable 5-level paging support via CONFIG_X86_5LEVEL=y
x86/mm: Allow userspace have mappings above 47-bit
x86/mm: Prepare to expose larger address space to userspace
x86/mpx: Do not allow MPX if we have mappings above 47-bit
x86/mm: Rename tasksize_32bit/64bit to task_size_32bit/64bit()
x86/xen: Redefine XEN_ELFNOTE_INIT_P2M using PUD_SIZE * PTRS_PER_PUD
x86/mm/dump_pagetables: Fix printout of p4d level
x86/mm/dump_pagetables: Generalize address normalization
x86/boot: Fix memremap() related build failure
...
Pull locking updates from Ingo Molnar:
- Add 'cross-release' support to lockdep, which allows APIs like
completions, where it's not the 'owner' who releases the lock, to be
tracked. It's all activated automatically under
CONFIG_PROVE_LOCKING=y.
- Clean up (restructure) the x86 atomics op implementation to be more
readable, in preparation of KASAN annotations. (Dmitry Vyukov)
- Fix static keys (Paolo Bonzini)
- Add killable versions of down_read() et al (Kirill Tkhai)
- Rework and fix jump_label locking (Marc Zyngier, Paolo Bonzini)
- Rework (and fix) tlb_flush_pending() barriers (Peter Zijlstra)
- Remove smp_mb__before_spinlock() and convert its usages, introduce
smp_mb__after_spinlock() (Peter Zijlstra)
* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (56 commits)
locking/lockdep/selftests: Fix mixed read-write ABBA tests
sched/completion: Avoid unnecessary stack allocation for COMPLETION_INITIALIZER_ONSTACK()
acpi/nfit: Fix COMPLETION_INITIALIZER_ONSTACK() abuse
locking/pvqspinlock: Relax cmpxchg's to improve performance on some architectures
smp: Avoid using two cache lines for struct call_single_data
locking/lockdep: Untangle xhlock history save/restore from task independence
locking/refcounts, x86/asm: Disable CONFIG_ARCH_HAS_REFCOUNT for the time being
futex: Remove duplicated code and fix undefined behaviour
Documentation/locking/atomic: Finish the document...
locking/lockdep: Fix workqueue crossrelease annotation
workqueue/lockdep: 'Fix' flush_work() annotation
locking/lockdep/selftests: Add mixed read-write ABBA tests
mm, locking/barriers: Clarify tlb_flush_pending() barriers
locking/lockdep: Make CONFIG_LOCKDEP_CROSSRELEASE and CONFIG_LOCKDEP_COMPLETIONS truly non-interactive
locking/lockdep: Explicitly initialize wq_barrier::done::map
locking/lockdep: Rename CONFIG_LOCKDEP_COMPLETE to CONFIG_LOCKDEP_COMPLETIONS
locking/lockdep: Reword title of LOCKDEP_CROSSRELEASE config
locking/lockdep: Make CONFIG_LOCKDEP_CROSSRELEASE part of CONFIG_PROVE_LOCKING
locking/refcounts, x86/asm: Implement fast refcount overflow protection
locking/lockdep: Fix the rollback and overwrite detection logic in crossrelease
...
Pull scheduler updates from Ingo Molnar:
"The main changes in this cycle were:
- fix affine wakeups (Peter Zijlstra)
- improve CPU onlining (and general bootup) scalability on systems
with ridiculous number (thousands) of CPUs (Peter Zijlstra)
- sched/numa updates (Rik van Riel)
- sched/deadline updates (Byungchul Park)
- sched/cpufreq enhancements and related cleanups (Viresh Kumar)
- sched/debug enhancements (Xie XiuQi)
- various fixes"
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (27 commits)
sched/debug: Optimize sched_domain sysctl generation
sched/topology: Avoid pointless rebuild
sched/topology, cpuset: Avoid spurious/wrong domain rebuilds
sched/topology: Improve comments
sched/topology: Fix memory leak in __sdt_alloc()
sched/completion: Document that reinit_completion() must be called after complete_all()
sched/autogroup: Fix error reporting printk text in autogroup_create()
sched/fair: Fix wake_affine() for !NUMA_BALANCING
sched/debug: Intruduce task_state_to_char() helper function
sched/debug: Show task state in /proc/sched_debug
sched/debug: Use task_pid_nr_ns in /proc/$pid/sched
sched/core: Remove unnecessary initialization init_idle_bootup_task()
sched/deadline: Change return value of cpudl_find()
sched/deadline: Make find_later_rq() choose a closer CPU in topology
sched/numa: Scale scan period with tasks in group and shared/private
sched/numa: Slow down scan rate if shared faults dominate
sched/pelt: Fix false running accounting
sched: Mark pick_next_task_dl() and build_sched_domain() as static
sched/cpupri: Don't re-initialize 'struct cpupri'
sched/deadline: Don't re-initialize 'struct cpudl'
...
Pull perf updates from Ingo Molnar:
"Kernel side changes:
- Add branch type profiling/tracing support. (Jin Yao)
- Add the PERF_SAMPLE_PHYS_ADDR ABI to allow the tracing/profiling of
physical memory addresses, where the PMU supports it. (Kan Liang)
- Export some PMU capability details in the new
/sys/bus/event_source/devices/cpu/caps/ sysfs directory. (Andi
Kleen)
- Aux data fixes and updates (Will Deacon)
- kprobes fixes and updates (Masami Hiramatsu)
- AMD uncore PMU driver fixes and updates (Janakarajan Natarajan)
On the tooling side, here's a (limited!) list of highlights - there
were many other changes that I could not list, see the shortlog and
git history for details:
UI improvements:
- Implement a visual marker for fused x86 instructions in the
annotate TUI browser, available now in 'perf report', more work
needed to have it available as well in 'perf top' (Jin Yao)
Further explanation from one of Jin's patches:
│ ┌──cmpl $0x0,argp_program_version_hook
81.93 │ ├──je 20
│ │ lock cmpxchg %esi,0x38a9a4(%rip)
│ │↓ jne 29
│ │↓ jmp 43
11.47 │20:└─→cmpxch %esi,0x38a999(%rip)
That means the cmpl+je is a fused instruction pair and they should
be considered together.
- Record the branch type and then show statistics and info about in
callchain entries (Jin Yao)
Example from one of Jin's patches:
# perf record -g -j any,save_type
# perf report --branch-history --stdio --no-children
38.50% div.c:45 [.] main div
|
---main div.c:42 (RET CROSS_2M cycles:2)
compute_flag div.c:28 (cycles:2)
compute_flag div.c:27 (RET CROSS_2M cycles:1)
rand rand.c:28 (cycles:1)
rand rand.c:28 (RET CROSS_2M cycles:1)
__random random.c:298 (cycles:1)
__random random.c:297 (COND_BWD CROSS_2M cycles:1)
__random random.c:295 (cycles:1)
__random random.c:295 (COND_BWD CROSS_2M cycles:1)
__random random.c:295 (cycles:1)
__random random.c:295 (RET CROSS_2M cycles:9)
namespaces support:
- Add initial support for namespaces, using setns to access files in
namespaces, grabbing their build-ids, etc. (Krister Johansen)
perf trace enhancements:
- Beautify pkey_{alloc,free,mprotect} arguments in 'perf trace'
(Arnaldo Carvalho de Melo)
- Add initial 'clone' syscall args beautifier in 'perf trace'
(Arnaldo Carvalho de Melo)
- Ignore 'fd' and 'offset' args for MAP_ANONYMOUS in 'perf trace'
(Arnaldo Carvalho de Melo)
- Beautifiers for the 'cmd' arg of several ioctl types, including:
sound, DRM, KVM, vhost virtio and perf_events. (Arnaldo Carvalho de
Melo)
- Add PERF_SAMPLE_CALLCHAIN and PERF_RECORD_MMAP[2] to 'perf data'
CTF conversion, allowing CTF trace visualization tools to show
callchains and to resolve symbols (Geneviève Bastien)
- Beautify the fcntl syscall, which is an interesting one in the
sense that infrastructure had to be put in place to change the
formatters of some arguments according to the value in a previous
one, i.e. cmd dictates how arg and the syscall return will be
formatted. (Arnaldo Carvalho de Melo
perf stat enhancements:
- Use group read for event groups in 'perf stat', reducing overhead
when groups are defined in the event specification, i.e. when using
{} to enclose a list of events, asking them to be read at the same
time, e.g.: "perf stat -e '{cycles,instructions}'" (Jiri Olsa)
pipe mode improvements:
- Process tracing data in 'perf annotate' pipe mode (David
Carrillo-Cisneros)
- Add header record types to pipe-mode, now this command:
$ perf record -o - -e cycles sleep 1 | perf report --stdio --header
Will show the same as in non-pipe mode, i.e. involving a perf.data
file (David Carrillo-Cisneros)
Vendor specific hardware event support updates/enhancements:
- Update POWER9 vendor events tables (Sukadev Bhattiprolu)
- Add POWER9 PMU events Sukadev (Bhattiprolu)
- Support additional POWER8+ PVR in PMU mapfile (Shriya)
- Add Skylake server uncore JSON vendor events (Andi Kleen)
- Support exporting Intel PT data to sqlite3 with python perf
scripts, this is in addition to the postgresql support that was
already there (Adrian Hunter)"
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (253 commits)
perf symbols: Fix plt entry calculation for ARM and AARCH64
perf probe: Fix kprobe blacklist checking condition
perf/x86: Fix caps/ for !Intel
perf/core, x86: Add PERF_SAMPLE_PHYS_ADDR
perf/core, pt, bts: Get rid of itrace_started
perf trace beauty: Beautify pkey_{alloc,free,mprotect} arguments
tools headers: Sync cpu features kernel ABI headers with tooling headers
perf tools: Pass full path of FEATURES_DUMP
perf tools: Robustify detection of clang binary
tools lib: Allow external definition of CC, AR and LD
perf tools: Allow external definition of flex and bison binary names
tools build tests: Don't hardcode gcc name
perf report: Group stat values on global event id
perf values: Zero value buffers
perf values: Fix allocation check
perf values: Fix thread index bug
perf report: Add dump_read function
perf record: Set read_format for inherit_stat
perf c2c: Fix remote HITM detection for Skylake
perf tools: Fix static build with newer toolchains
...
Pull RCU updates from Ingo Molnad:
"The main RCU related changes in this cycle were:
- Removal of spin_unlock_wait()
- SRCU updates
- RCU torture-test updates
- RCU Documentation updates
- Extend the sys_membarrier() ABI with the MEMBARRIER_CMD_PRIVATE_EXPEDITED variant
- Miscellaneous RCU fixes
- CPU-hotplug fixes"
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (63 commits)
arch: Remove spin_unlock_wait() arch-specific definitions
locking: Remove spin_unlock_wait() generic definitions
drivers/ata: Replace spin_unlock_wait() with lock/unlock pair
ipc: Replace spin_unlock_wait() with lock/unlock pair
exit: Replace spin_unlock_wait() with lock/unlock pair
completion: Replace spin_unlock_wait() with lock/unlock pair
doc: Set down RCU's scheduling-clock-interrupt needs
doc: No longer allowed to use rcu_dereference on non-pointers
doc: Add RCU files to docbook-generation files
doc: Update memory-barriers.txt for read-to-write dependencies
doc: Update RCU documentation
membarrier: Provide expedited private command
rcu: Remove exports from rcu_idle_exit() and rcu_idle_enter()
rcu: Add warning to rcu_idle_enter() for irqs enabled
rcu: Make rcu_idle_enter() rely on callers disabling irqs
rcu: Add assertions verifying blocked-tasks list
rcu/tracing: Set disable_rcu_irq_enter on rcu_eqs_exit()
rcu: Add TPS() protection for _rcu_barrier_trace strings
rcu: Use idle versions of swait to make idle-hack clear
swait: Add idle variants which don't contribute to load average
...
struct timespec is not y2038 safe. Replace
all uses of timespec by y2038 safe struct timespec64.
Even though timespec is used here to represent timeouts,
replace these with timespec64 so that it facilitates
in verification by creating a y2038 safe kernel image
that is free of timespec.
The syscall interfaces themselves are not changed as part
of the patch. They will be part of a different series.
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Cc: Paul Moore <paul@paul-moore.com>
Cc: Richard Guy Briggs <rgb@redhat.com>
Reviewed-by: Richard Guy Briggs <rgb@redhat.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* pm-sleep:
ACPI / PM: Check low power idle constraints for debug only
PM / s2idle: Rename platform operations structure
PM / s2idle: Rename ->enter_freeze to ->enter_s2idle
PM / s2idle: Rename freeze_state enum and related items
PM / s2idle: Rename PM_SUSPEND_FREEZE to PM_SUSPEND_TO_IDLE
ACPI / PM: Prefer suspend-to-idle over S3 on some systems
platform/x86: intel-hid: Wake up Dell Latitude 7275 from suspend-to-idle
PM / suspend: Define pr_fmt() in suspend.c
PM / suspend: Use mem_sleep_labels[] strings in messages
PM / sleep: Put pm_test under CONFIG_PM_SLEEP_DEBUG
PM / sleep: Check pm_wakeup_pending() in __device_suspend_noirq()
PM / core: Add error argument to dpm_show_time()
PM / core: Split dpm_suspend_noirq() and dpm_resume_noirq()
PM / s2idle: Rearrange the main suspend-to-idle loop
PM / timekeeping: Print debug messages when requested
PM / sleep: Mark suspend/hibernation start and finish
PM / sleep: Do not print debug messages by default
PM / suspend: Export pm_suspend_target_state
* pm-cpufreq-sched:
cpufreq: schedutil: Always process remote callback with slow switching
cpufreq: schedutil: Don't restrict kthread to related_cpus unnecessarily
cpufreq: Return 0 from ->fast_switch() on errors
cpufreq: Simplify cpufreq_can_do_remote_dvfs()
cpufreq: Process remote callbacks from any CPU if the platform permits
sched: cpufreq: Allow remote cpufreq callbacks
cpufreq: schedutil: Use unsigned int for iowait boost
cpufreq: schedutil: Make iowait boost more energy efficient
* pm-cpufreq: (33 commits)
cpufreq: imx6q: Fix imx6sx low frequency support
cpufreq: speedstep-lib: make several arrays static, makes code smaller
cpufreq: ti: Fix 'of_node_put' being called twice in error handling path
cpufreq: dt-platdev: Drop few entries from whitelist
cpufreq: dt-platdev: Automatically create cpufreq device with OPP v2
ARM: ux500: don't select CPUFREQ_DT
cpufreq: Convert to using %pOF instead of full_name
cpufreq: Cap the default transition delay value to 10 ms
cpufreq: dbx500: Delete obsolete driver
mfd: db8500-prcmu: Get rid of cpufreq dependency
cpufreq: enable the DT cpufreq driver on the Ux500
cpufreq: Loongson2: constify platform_device_id
cpufreq: dt: Add r8a7796 support to to use generic cpufreq driver
cpufreq: remove setting of policy->cpu in policy->cpus during init
cpufreq: mediatek: add support of cpufreq to MT7622 SoC
cpufreq: mediatek: add cleanups with the more generic naming
cpufreq: rcar: Add support for R8A7795 SoC
cpufreq: dt: Add rk3328 compatible to use generic cpufreq driver
cpufreq: s5pv210: add missing of_node_put()
cpufreq: Allow dynamic switching with CPUFREQ_ETERNAL latency
...
* pm-core:
PM / wakeup: Set power.can_wakeup if wakeup_sysfs_add() fails
* pm-opp:
PM / OPP: Fix get sharing CPUs when hotplug is used
PM / OPP: OF: Use pr_debug() instead of pr_err() while adding OPP table
* pm-domains:
PM / Domains: Convert to using %pOF instead of full_name
PM / Domains: Extend generic power domain debugfs
PM / Domains: Add time accounting to various genpd states
* pm-cpu:
PM / CPU: replace raw_notifier with atomic_notifier
* pm-avs:
PM / AVS: rockchip-io: add io selectors and supplies for RV1108
Pull timer fix from Thomas Gleixner:
"A single fix for a thinko in the raw timekeeper update which causes
clock MONOTONIC_RAW to run with erratically increased frequency"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
time: Fix ktime_get_raw() incorrect base accumulation
Pull perf fixes from Thomas Gleixner:
- Prevent a potential inconistency in the perf user space access which
might lead to evading sanity checks.
- Prevent perf recording function trace entries twice
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/ftrace: Fix double traces of perf on ftrace:function
perf/core: Fix potential double-fetch bug
Instead of tracking wmem_queued and sk_mem_charge by incrementing
in the verdict SK_REDIRECT paths and decrementing in the tx work
path use skb_set_owner_w and sock_writeable helpers. This solves
a few issues with the current code. First, in SK_REDIRECT inc on
sk_wmem_queued and sk_mem_charge were being done without the peers
sock lock being held. Under stress this can result in accounting
errors when tx work and/or multiple verdict decisions are working
on the peer psock.
Additionally, this cleans up the code because we can rely on the
default destructor to decrement memory accounting on kfree_skb. Also
this will trigger sk_write_space when space becomes available on
kfree_skb() which wasn't happening before and prevent __sk_free
from being called until all in-flight packets are completed.
Fixes: 174a79ff95 ("bpf: sockmap with sk redirect support")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull networking fixes from David Miller:
1) Fix handling of pinned BPF map nodes in hash of maps, from Daniel
Borkmann.
2) IPSEC ESP error paths leak memory, from Steffen Klassert.
3) We need an RCU grace period before freeing fib6_node objects, from
Wei Wang.
4) Must check skb_put_padto() return value in HSR driver, from FLorian
Fainelli.
5) Fix oops on PHY probe failure in ftgmac100 driver, from Andrew
Jeffery.
6) Fix infinite loop in UDP queue when using SO_PEEK_OFF, from Eric
Dumazet.
7) Use after free when tcf_chain_destroy() called multiple times, from
Jiri Pirko.
8) Fix KSZ DSA tag layer multiple free of SKBS, from Florian Fainelli.
9) Fix leak of uninitialized memory in sctp_get_sctp_info(),
inet_diag_msg_sctpladdrs_fill() and inet_diag_msg_sctpaddrs_fill().
From Stefano Brivio.
10) L2TP tunnel refcount fixes from Guillaume Nault.
11) Don't leak UDP secpath in udp_set_dev_scratch(), from Yossi
Kauperman.
12) Revert a PHY layer change wrt. handling of PHY_HALTED state in
phy_stop_machine(), it causes regressions for multiple people. From
Florian Fainelli.
13) When packets are sent out of br0 we have to clear the
offload_fwdq_mark value.
14) Several NULL pointer deref fixes in packet schedulers when their
->init() routine fails. From Nikolay Aleksandrov.
15) Aquantium devices cannot checksum offload correctly when the packet
is <= 60 bytes. From Pavel Belous.
16) Fix vnet header access past end of buffer in AF_PACKET, from
Benjamin Poirier.
17) Double free in probe error paths of nfp driver, from Dan Carpenter.
18) QOS capability not checked properly in DCB init paths of mlx5
driver, from Huy Nguyen.
19) Fix conflicts between firmware load failure and health_care timer in
mlx5, also from Huy Nguyen.
20) Fix dangling page pointer when DMA mapping errors occur in mlx5,
from Eran Ben ELisha.
21) ->ndo_setup_tc() in bnxt_en driver doesn't count rings properly,
from Michael Chan.
22) Missing MSIX vector free in bnxt_en, also from Michael Chan.
23) Refcount leak in xfrm layer when using sk_policy, from Lorenzo
Colitti.
24) Fix copy of uninitialized data in qlge driver, from Arnd Bergmann.
25) bpf_setsockopts() erroneously always returns -EINVAL even on
success. Fix from Yuchung Cheng.
26) tipc_rcv() needs to linearize the SKB before parsing the inner
headers, from Parthasarathy Bhuvaragan.
27) Fix deadlock between link status updates and link removal in netvsc
driver, from Stephen Hemminger.
28) Missed locking of page fragment handling in ESP output, from Steffen
Klassert.
29) Fix refcnt leak in ebpf congestion control code, from Sabrina
Dubroca.
30) sxgbe_probe_config_dt() doesn't check devm_kzalloc()'s return value,
from Christophe Jaillet.
31) Fix missing ipv6 rx_dst_cookie update when rx_dst is updated during
early demux, from Paolo Abeni.
32) Several info leaks in xfrm_user layer, from Mathias Krause.
33) Fix out of bounds read in cxgb4 driver, from Stefano Brivio.
34) Properly propagate obsolete state of route upwards in ipv6 so that
upper holders like xfrm can see it. From Xin Long.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (118 commits)
udp: fix secpath leak
bridge: switchdev: Clear forward mark when transmitting packet
mlxsw: spectrum: Forbid linking to devices that have uppers
wl1251: add a missing spin_lock_init()
Revert "net: phy: Correctly process PHY_HALTED in phy_stop_machine()"
net: dsa: bcm_sf2: Fix number of CFP entries for BCM7278
kcm: do not attach PF_KCM sockets to avoid deadlock
sch_tbf: fix two null pointer dereferences on init failure
sch_sfq: fix null pointer dereference on init failure
sch_netem: avoid null pointer deref on init failure
sch_fq_codel: avoid double free on init failure
sch_cbq: fix null pointer dereferences on init failure
sch_hfsc: fix null pointer deref and double free on init failure
sch_hhf: fix null pointer dereference on init failure
sch_multiq: fix double free on init failure
sch_htb: fix crash on init failure
net/mlx5e: Fix CQ moderation mode not set properly
net/mlx5e: Fix inline header size for small packets
net/mlx5: E-Switch, Unload the representors in the correct order
net/mlx5e: Properly resolve TC offloaded ipv6 vxlan tunnel source address
...
If function tracing is disabled by the user via the function-trace option or
the proc sysctl file, and a ftrace_ops that was allocated on the heap is
unregistered, then the shutdown code exits out without doing the proper
clean up. This was found via kmemleak and running the ftrace selftests, as
one of the tests unregisters with function tracing disabled.
# cat kmemleak
unreferenced object 0xffffffffa0020000 (size 4096):
comm "swapper/0", pid 1, jiffies 4294668889 (age 569.209s)
hex dump (first 32 bytes):
55 ff 74 24 10 55 48 89 e5 ff 74 24 18 55 48 89 U.t$.UH...t$.UH.
e5 48 81 ec a8 00 00 00 48 89 44 24 50 48 89 4c .H......H.D$PH.L
backtrace:
[<ffffffff81d64665>] kmemleak_vmalloc+0x85/0xf0
[<ffffffff81355631>] __vmalloc_node_range+0x281/0x3e0
[<ffffffff8109697f>] module_alloc+0x4f/0x90
[<ffffffff81091170>] arch_ftrace_update_trampoline+0x160/0x420
[<ffffffff81249947>] ftrace_startup+0xe7/0x300
[<ffffffff81249bd2>] register_ftrace_function+0x72/0x90
[<ffffffff81263786>] trace_selftest_ops+0x204/0x397
[<ffffffff82bb8971>] trace_selftest_startup_function+0x394/0x624
[<ffffffff81263a75>] run_tracer_selftest+0x15c/0x1d7
[<ffffffff82bb83f1>] init_trace_selftests+0x75/0x192
[<ffffffff81002230>] do_one_initcall+0x90/0x1e2
[<ffffffff82b7d620>] kernel_init_freeable+0x350/0x3fe
[<ffffffff81d61ec3>] kernel_init+0x13/0x122
[<ffffffff81d72c6a>] ret_from_fork+0x2a/0x40
[<ffffffffffffffff>] 0xffffffffffffffff
Cc: stable@vger.kernel.org
Fixes: 12cce594fa ("ftrace/x86: Allow !CONFIG_PREEMPT dynamic ops to use allocated trampolines")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
This patch writes 'node->ref = 1' only if node->ref is 0.
The number of lookups/s for a ~1M entries LRU map increased by
~30% (260097 to 343313).
Other writes on 'node->ref = 0' is not changed. In those cases, the
same cache line has to be changed anyway.
First column: Size of the LRU hash
Second column: Number of lookups/s
Before:
> echo "$((2**20+1)): $(./map_perf_test 1024 1 $((2**20+1)) 10000000 | awk '{print $3}')"
1048577: 260097
After:
> echo "$((2**20+1)): $(./map_perf_test 1024 1 $((2**20+1)) 10000000 | awk '{print $3}')"
1048577: 343313
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Inline the lru map lookup to save the cost in making calls to
bpf_map_lookup_elem() and htab_lru_map_lookup_elem().
Different LRU hash size is tested. The benefit diminishes when
the cache miss starts to dominate in the bigger LRU hash.
Considering the change is simple, it is still worth to optimize.
First column: Size of the LRU hash
Second column: Number of lookups/s
Before:
> for i in $(seq 9 20); do echo "$((2**i+1)): $(./map_perf_test 1024 1 $((2**i+1)) 10000000 | awk '{print $3}')"; done
513: 1132020
1025: 1056826
2049: 1007024
4097: 853298
8193: 742723
16385: 712600
32769: 688142
65537: 677028
131073: 619437
262145: 498770
524289: 316695
1048577: 260038
After:
> for i in $(seq 9 20); do echo "$((2**i+1)): $(./map_perf_test 1024 1 $((2**i+1)) 10000000 | awk '{print $3}')"; done
513: 1221851
1025: 1144695
2049: 1049902
4097: 884460
8193: 773731
16385: 729673
32769: 721989
65537: 715530
131073: 671665
262145: 516987
524289: 321125
1048577: 260048
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
In the second iteration of trace_selftest_ops(), the error goto label is
wrong in the case where trace_selftest_test_global_cnt is off. In the
case of error, it leaks the dynamic ops that was allocated.
Cc: stable@vger.kernel.org
Fixes: 95950c2e ("ftrace: Add self-tests for multiple function trace users")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
When a ftrace filter has a module function, and that module is removed, the
filter still has its address as being enabled. This can cause interesting
side effects. Nothing dangerous, but unwanted functions can be traced
because of it.
# cd /sys/kernel/tracing
# echo ':mod:snd_seq' > set_ftrace_filter
# cat set_ftrace_filter
snd_use_lock_sync_helper [snd_seq]
check_event_type_and_length [snd_seq]
snd_seq_ioctl_pversion [snd_seq]
snd_seq_ioctl_client_id [snd_seq]
snd_seq_ioctl_get_queue_tempo [snd_seq]
update_timestamp_of_queue [snd_seq]
snd_seq_ioctl_get_queue_status [snd_seq]
snd_seq_set_queue_tempo [snd_seq]
snd_seq_ioctl_set_queue_tempo [snd_seq]
snd_seq_ioctl_get_queue_timer [snd_seq]
seq_free_client1 [snd_seq]
[..]
# rmmod snd_seq
# cat set_ftrace_filter
# modprobe kvm
# cat set_ftrace_filter
kvm_set_cr4 [kvm]
kvm_emulate_hypercall [kvm]
kvm_set_dr [kvm]
This is because removing the snd_seq module after it was being filtered,
left the address of the snd_seq functions in the hash. When the kvm module
was loaded, some of its functions were loaded at the same address as the
snd_seq module. This would enable them to be filtered and traced.
Now we don't want to clear the hash completely. That would cause removing a
module where only its functions are filtered, to cause the tracing to enable
all functions, as an empty filter means to trace all functions. Instead,
just set the hash ip address to zero. Then it will never match any function.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Commit 7c05126793 ("mm, fork: make dup_mmap wait for mmap_sem for
write killable") made it possible to kill a forking task while it is
waiting to acquire its ->mmap_sem for write, in dup_mmap().
However, it was overlooked that this introduced an new error path before
the new mm_struct's ->uprobes_state.xol_area has been set to NULL after
being copied from the old mm_struct by the memcpy in dup_mm(). For a
task that has previously hit a uprobe tracepoint, this resulted in the
'struct xol_area' being freed multiple times if the task was killed at
just the right time while forking.
Fix it by setting ->uprobes_state.xol_area to NULL in mm_init() rather
than in uprobe_dup_mmap().
With CONFIG_UPROBE_EVENTS=y, the bug can be reproduced by the same C
program given by commit 2b7e8665b4 ("fork: fix incorrect fput of
->exe_file causing use-after-free"), provided that a uprobe tracepoint
has been set on the fork_thread() function. For example:
$ gcc reproducer.c -o reproducer -lpthread
$ nm reproducer | grep fork_thread
0000000000400719 t fork_thread
$ echo "p $PWD/reproducer:0x719" > /sys/kernel/debug/tracing/uprobe_events
$ echo 1 > /sys/kernel/debug/tracing/events/uprobes/enable
$ ./reproducer
Here is the use-after-free reported by KASAN:
BUG: KASAN: use-after-free in uprobe_clear_state+0x1c4/0x200
Read of size 8 at addr ffff8800320a8b88 by task reproducer/198
CPU: 1 PID: 198 Comm: reproducer Not tainted 4.13.0-rc7-00015-g36fde05f3fb5 #255
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-20170228_101828-anatol 04/01/2014
Call Trace:
dump_stack+0xdb/0x185
print_address_description+0x7e/0x290
kasan_report+0x23b/0x350
__asan_report_load8_noabort+0x19/0x20
uprobe_clear_state+0x1c4/0x200
mmput+0xd6/0x360
do_exit+0x740/0x1670
do_group_exit+0x13f/0x380
get_signal+0x597/0x17d0
do_signal+0x99/0x1df0
exit_to_usermode_loop+0x166/0x1e0
syscall_return_slowpath+0x258/0x2c0
entry_SYSCALL_64_fastpath+0xbc/0xbe
...
Allocated by task 199:
save_stack_trace+0x1b/0x20
kasan_kmalloc+0xfc/0x180
kmem_cache_alloc_trace+0xf3/0x330
__create_xol_area+0x10f/0x780
uprobe_notify_resume+0x1674/0x2210
exit_to_usermode_loop+0x150/0x1e0
prepare_exit_to_usermode+0x14b/0x180
retint_user+0x8/0x20
Freed by task 199:
save_stack_trace+0x1b/0x20
kasan_slab_free+0xa8/0x1a0
kfree+0xba/0x210
uprobe_clear_state+0x151/0x200
mmput+0xd6/0x360
copy_process.part.8+0x605f/0x65d0
_do_fork+0x1a5/0xbd0
SyS_clone+0x19/0x20
do_syscall_64+0x22f/0x660
return_from_SYSCALL_64+0x0/0x7a
Note: without KASAN, you may instead see a "Bad page state" message, or
simply a general protection fault.
Link: http://lkml.kernel.org/r/20170830033303.17927-1-ebiggers3@gmail.com
Fixes: 7c05126793 ("mm, fork: make dup_mmap wait for mmap_sem for write killable")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reported-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org> [4.7+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If the worker thread continues getting work, it will hog the cpu and rcu
stall complains. Make it a good citizen. This is triggered in a loop
block device test.
Link: http://lkml.kernel.org/r/5de0a179b3184e1a2183fc503448b0269f24d75b.1503697127.git.shli@fb.com
Signed-off-by: Shaohua Li <shli@fb.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tejun Heo <tj@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently, when a module event is enabled, when that module is removed, it
clears all ring buffers. This is to prevent another module from being loaded
and having one of its trace event IDs from reusing a trace event ID of the
removed module. This could cause undesirable effects as the trace event of
the new module would be using its own processing algorithms to process raw
data of another event. To prevent this, when a module is loaded, if any of
its events have been used (signified by the WAS_ENABLED event call flag,
which is never cleared), all ring buffers are cleared, just in case any one
of them contains event data of the removed event.
The problem is, there's no reason to clear all ring buffers if only one (or
less than all of them) uses one of the events. Instead, only clear the ring
buffers that recorded the events of a module that is being removed.
To do this, instead of keeping the WAS_ENABLED flag with the trace event
call, move it to the per instance (per ring buffer) event file descriptor.
The event file descriptor maps each event to a separate ring buffer
instance. Then when the module is removed, only the ring buffers that
activated one of the module's events get cleared. The rest are not touched.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
When registering the rtc device to be used to handle alarm timers,
get_device is used to ensure the device doesn't go away but the module can
still be unloaded.
Call try_module_get to ensure the rtc driver will not go away.
Reported-and-tested-by: Michal Simek <monstr@monstr.eu>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: John Stultz <john.stultz@linaro.org>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Link: http://lkml.kernel.org/r/20170820220146.30969-1-alexandre.belloni@free-electrons.com
- irqchip-specific part of the monster GICv4 series
- new UniPhier AIDET irqchip driver
- new variants of some Freescale MSI widget
- blanket removal of of_node->full_name in printk
- random collection of fixes
-----BEGIN PGP SIGNATURE-----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=3ZS3
-----END PGP SIGNATURE-----
Merge tag 'irqchip-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core
Pull irqchip updates for 4.14 from Marc Zyngier:
- irqchip-specific part of the monster GICv4 series
- new UniPhier AIDET irqchip driver
- new variants of some Freescale MSI widget
- blanket removal of of_node->full_name in printk
- random collection of fixes
Pull cgroup fix from Tejun Heo:
"A late but obvious fix for cgroup.
I broke the 'cpuset.memory_pressure' file a long time ago (v4.4) by
accidentally deleting its file index, which made it a duplicate of the
'cpuset.memory_migrate' file. Spotted and fixed by Waiman"
* 'for-4.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cpuset: Fix incorrect memory_pressure control file mapping
All the locking related cmpxchg's in the following functions are
replaced with the _acquire variants:
- pv_queued_spin_steal_lock()
- trylock_clear_pending()
This change should help performance on architectures that use LL/SC.
The cmpxchg in pv_kick_node() is replaced with a relaxed version
with explicit memory barrier to make sure that it is fully ordered
in the writing of next->lock and the reading of pn->state whether
the cmpxchg is a success or failure without affecting performance in
non-LL/SC architectures.
On a 2-socket 12-core 96-thread Power8 system with pvqspinlock
explicitly enabled, the performance of a locking microbenchmark
with and without this patch on a 4.13-rc4 kernel with Xinhui's PPC
qspinlock patch were as follows:
# of thread w/o patch with patch % Change
----------- --------- ---------- --------
8 5054.8 Mop/s 5209.4 Mop/s +3.1%
16 3985.0 Mop/s 4015.0 Mop/s +0.8%
32 2378.2 Mop/s 2396.0 Mop/s +0.7%
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrea Parri <parri.andrea@gmail.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Pan Xinhui <xinhui@linux.vnet.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Link: http://lkml.kernel.org/r/1502741222-24360-1-git-send-email-longman@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
struct call_single_data is used in IPIs to transfer information between
CPUs. Its size is bigger than sizeof(unsigned long) and less than
cache line size. Currently it is not allocated with any explicit alignment
requirements. This makes it possible for allocated call_single_data to
cross two cache lines, which results in double the number of the cache lines
that need to be transferred among CPUs.
This can be fixed by requiring call_single_data to be aligned with the
size of call_single_data. Currently the size of call_single_data is the
power of 2. If we add new fields to call_single_data, we may need to
add padding to make sure the size of new definition is the power of 2
as well.
Fortunately, this is enforced by GCC, which will report bad sizes.
To set alignment requirements of call_single_data to the size of
call_single_data, a struct definition and a typedef is used.
To test the effect of the patch, I used the vm-scalability multiple
thread swap test case (swap-w-seq-mt). The test will create multiple
threads and each thread will eat memory until all RAM and part of swap
is used, so that huge number of IPIs are triggered when unmapping
memory. In the test, the throughput of memory writing improves ~5%
compared with misaligned call_single_data, because of faster IPIs.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Huang, Ying <ying.huang@intel.com>
[ Add call_single_data_t and align with size of call_single_data. ]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Aaron Lu <aaron.lu@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/87bmnqd6lz.fsf@yhuang-mobile.sh.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Where XHLOCK_{SOFT,HARD} are save/restore points in the xhlocks[] to
ensure the temporal IRQ events don't interact with task state, the
XHLOCK_PROC is a fundament different beast that just happens to share
the interface.
The purpose of XHLOCK_PROC is to annotate independent execution inside
one task. For example workqueues, each work should appear to run in its
own 'pristine' 'task'.
Remove XHLOCK_PROC in favour of its own interface to avoid confusion.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Byungchul Park <byungchul.park@lge.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: boqun.feng@gmail.com
Cc: david@fromorbit.com
Cc: johannes@sipsolutions.net
Cc: kernel-team@lge.com
Cc: oleg@redhat.com
Cc: tj@kernel.org
Link: http://lkml.kernel.org/r/20170829085939.ggmb6xiohw67micb@hirez.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
For understanding how the workload maps to memory channels and hardware
behavior, it's very important to collect address maps with physical
addresses. For example, 3D XPoint access can only be found by filtering
the physical address.
Add a new sample type for physical address.
perf already has a facility to collect data virtual address. This patch
introduces a function to convert the virtual address to physical address.
The function is quite generic and can be extended to any architecture as
long as a virtual address is provided.
- For kernel direct mapping addresses, virt_to_phys is used to convert
the virtual addresses to physical address.
- For user virtual addresses, __get_user_pages_fast is used to walk the
pages tables for user physical address.
- This does not work for vmalloc addresses right now. These are not
resolved, but code to do that could be added.
The new sample type requires collecting the virtual address. The
virtual address will not be output unless SAMPLE_ADDR is applied.
For security, the physical address can only be exposed to root or
privileged user.
Tested-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Kan Liang <kan.liang@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: acme@kernel.org
Cc: mpe@ellerman.id.au
Link: http://lkml.kernel.org/r/1503967969-48278-1-git-send-email-kan.liang@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
I just noticed that hw.itrace_started and hw.config are aliased to the
same location. Now, the PT driver happens to use both, which works out
fine by sheer luck:
- STORE(hw.itrace_start) is ordered before STORE(hw.config), in the
program order, although there are no compiler barriers to ensure that,
- to the perf_log_itrace_start() hw.itrace_start looks set at the same
time as when it is intended to be set because both stores happen in the
same path,
- hw.config is never reset to zero in the PT driver.
Now, the use of hw.config by the PT driver makes more sense (it being a
HW PMU) than messing around with itrace_started, which is an awkward API
to begin with.
This patch replaces hw.itrace_started with an attach_state bit and an
API call for the PMU drivers to use to communicate the condition.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: vince@deater.net
Link: http://lkml.kernel.org/r/20170330153956.25994-1-alexander.shishkin@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When running perf on the ftrace:function tracepoint, there is a bug
which can be reproduced by:
perf record -e ftrace:function -a sleep 20 &
perf record -e ftrace:function ls
perf script
ls 10304 [005] 171.853235: ftrace:function:
perf_output_begin
ls 10304 [005] 171.853237: ftrace:function:
perf_output_begin
ls 10304 [005] 171.853239: ftrace:function:
task_tgid_nr_ns
ls 10304 [005] 171.853240: ftrace:function:
task_tgid_nr_ns
ls 10304 [005] 171.853242: ftrace:function:
__task_pid_nr_ns
ls 10304 [005] 171.853244: ftrace:function:
__task_pid_nr_ns
We can see that all the function traces are doubled.
The problem is caused by the inconsistency of the register
function perf_ftrace_event_register() with the probe function
perf_ftrace_function_call(). The former registers one probe
for every perf_event. And the latter handles all perf_events
on the current cpu. So when two perf_events on the current cpu,
the traces of them will be doubled.
So this patch adds an extra parameter "event" for perf_tp_event,
only send sample data to this event when it's not NULL.
Signed-off-by: Zhou Chengming <zhouchengming1@huawei.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: acme@kernel.org
Cc: alexander.shishkin@linux.intel.com
Cc: huawei.libin@huawei.com
Link: http://lkml.kernel.org/r/1503668977-12526-1-git-send-email-zhouchengming1@huawei.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
While examining the kernel source code, I found a dangerous operation that
could turn into a double-fetch situation (a race condition bug) where the same
userspace memory region are fetched twice into kernel with sanity checks after
the first fetch while missing checks after the second fetch.
1. The first fetch happens in line 9573 get_user(size, &uattr->size).
2. Subsequently the 'size' variable undergoes a few sanity checks and
transformations (line 9577 to 9584).
3. The second fetch happens in line 9610 copy_from_user(attr, uattr, size)
4. Given that 'uattr' can be fully controlled in userspace, an attacker can
race condition to override 'uattr->size' to arbitrary value (say, 0xFFFFFFFF)
after the first fetch but before the second fetch. The changed value will be
copied to 'attr->size'.
5. There is no further checks on 'attr->size' until the end of this function,
and once the function returns, we lose the context to verify that 'attr->size'
conforms to the sanity checks performed in step 2 (line 9577 to 9584).
6. My manual analysis shows that 'attr->size' is not used elsewhere later,
so, there is no working exploit against it right now. However, this could
easily turns to an exploitable one if careless developers start to use
'attr->size' later.
To fix this, override 'attr->size' from the second fetch to the one from the
first fetch, regardless of what is actually copied in.
In this way, it is assured that 'attr->size' is consistent with the checks
performed after the first fetch.
Signed-off-by: Meng Xu <mengxu.gatech@gmail.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: acme@kernel.org
Cc: alexander.shishkin@linux.intel.com
Cc: meng.xu@gatech.edu
Cc: sanidhya@gatech.edu
Cc: taesoo@gatech.edu
Link: http://lkml.kernel.org/r/1503522470-35531-1-git-send-email-meng.xu@gatech.edu
Signed-off-by: Ingo Molnar <mingo@kernel.org>
"err" is set to zero if bpf_map_area_alloc() fails so it means we return
ERR_PTR(0) which is NULL. The caller, find_and_alloc_map(), is not
expecting NULL returns and will oops.
Fixes: 174a79ff95 ("bpf: sockmap with sk redirect support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After userspace pushes sockets into a sockmap it may not be receiving
data (assuming stream_{parser|verdict} programs are attached). But, it
may still want to manage the socks. A common pattern is to poll/select
for a POLLRDHUP event so we can close the sock.
This patch adds the logic to wake up these listeners.
Also add TCP_SYN_SENT to the list of events to handle. We don't want
to break the connection just because we happen to be in this state.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When attaching a program to sockmap we need to check map type
is correct.
Fixes: 174a79ff95 ("bpf: sockmap with sk redirect support")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
References to psock must be done inside RCU critical section.
Fixes: 174a79ff95 ("bpf: sockmap with sk redirect support")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The addition of map_flags BPF_SOCKMAP_STRPARSER flags was to handle a
specific use case where we want to have BPF parse program disabled on
an entry in a sockmap.
However, Alexei found the API a bit cumbersome and I agreed. Lets
remove the STRPARSER flag and support the use case by allowing socks
to be in multiple maps. This allows users to create two maps one with
programs attached and one without. When socks are added to maps they
now inherit any programs attached to the map. This is a nice
generalization and IMO improves the API.
The API rules are less ambiguous and do not need a flag:
- When a sock is added to a sockmap we have two cases,
i. The sock map does not have any attached programs so
we can add sock to map without inheriting bpf programs.
The sock may exist in 0 or more other maps.
ii. The sock map has an attached BPF program. To avoid duplicate
bpf programs we only add the sock entry if it does not have
an existing strparser/verdict attached, returning -EBUSY if
a program is already attached. Otherwise attach the program
and inherit strparser/verdict programs from the sock map.
This allows for socks to be in a multiple maps for redirects and
inherit a BPF program from a single map.
Also this patch simplifies the logic around BPF_{EXIST|NOEXIST|ANY}
flags. In the original patch I tried to be extra clever and only
update map entries when necessary. Now I've decided the complexity
is not worth it. If users constantly update an entry with the same
sock for no reason (i.e. update an entry without actually changing
any parameters on map or sock) we still do an alloc/release. Using
this and allowing multiple entries of a sock to exist in a map the
logic becomes much simpler.
Note: Now that multiple maps are supported the "maps" pointer called
when a socket is closed becomes a list of maps to remove the sock from.
To keep the map up to date when a sock is added to the sockmap we must
add the map/elem in the list. Likewise when it is removed we must
remove it from the list. This results in searching the per psock list
on delete operation. On TCP_CLOSE events we walk the list and remove
the psock from all map/entry locations. I don't see any perf
implications in this because at most I have a psock in two maps. If
a psock were to be in many maps its possibly this might be noticeable
on delete but I can't think of a reason to dup a psock in many maps.
The sk_callback_lock is used to protect read/writes to the list. This
was convenient because in all locations we were taking the lock
anyways just after working on the list. Also the lock is per sock so
in normal cases we shouldn't see any contention.
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Fixes: 174a79ff95 ("bpf: sockmap with sk redirect support")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
In the initial sockmap API we provided strparser and verdict programs
using a single attach command by extending the attach API with a the
attach_bpf_fd2 field.
However, if we add other programs in the future we will be adding a
field for every new possible type, attach_bpf_fd(3,4,..). This
seems a bit clumsy for an API. So lets push the programs using two
new type fields.
BPF_SK_SKB_STREAM_PARSER
BPF_SK_SKB_STREAM_VERDICT
This has the advantage of having a readable name and can easily be
extended in the future.
Updates to samples and sockmap included here also generalize tests
slightly to support upcoming patch for multiple map support.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Fixes: 174a79ff95 ("bpf: sockmap with sk redirect support")
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tim Chen and Kan Liang have been battling a customer load that shows
extremely long page wakeup lists. The cause seems to be constant NUMA
migration of a hot page that is shared across a lot of threads, but the
actual root cause for the exact behavior has not been found.
Tim has a patch that batches the wait list traversal at wakeup time, so
that we at least don't get long uninterruptible cases where we traverse
and wake up thousands of processes and get nasty latency spikes. That
is likely 4.14 material, but we're still discussing the page waitqueue
specific parts of it.
In the meantime, I've tried to look at making the page wait queues less
expensive, and failing miserably. If you have thousands of threads
waiting for the same page, it will be painful. We'll need to try to
figure out the NUMA balancing issue some day, in addition to avoiding
the excessive spinlock hold times.
That said, having tried to rewrite the page wait queues, I can at least
fix up some of the braindamage in the current situation. In particular:
(a) we don't want to continue walking the page wait list if the bit
we're waiting for already got set again (which seems to be one of
the patterns of the bad load). That makes no progress and just
causes pointless cache pollution chasing the pointers.
(b) we don't want to put the non-locking waiters always on the front of
the queue, and the locking waiters always on the back. Not only is
that unfair, it means that we wake up thousands of reading threads
that will just end up being blocked by the writer later anyway.
Also add a comment about the layout of 'struct wait_page_key' - there is
an external user of it in the cachefiles code that means that it has to
match the layout of 'struct wait_bit_key' in the two first members. It
so happens to match, because 'struct page *' and 'unsigned long *' end
up having the same values simply because the page flags are the first
member in struct page.
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Christopher Lameter <cl@linux.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull timer fix from Ingo Molnar:
"Fix a timer granularity handling race+bug, which would manifest itself
by spuriously increasing timeouts of some timers (from 1 jiffy to ~500
jiffies in the worst case measured) in certain nohz states"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timers: Fix excessive granularity of new timers after a nohz idle
Pull perf fix from Ingo Molnar:
"A single fix to not allow nonsensical event groups that result in
kernel warnings"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Fix group {cpu,task} validation
In comqit fc6eead7c1 ("time: Clean up CLOCK_MONOTONIC_RAW time
handling"), the following code got mistakenly added to the update of the
raw timekeeper:
/* Update the monotonic raw base */
seconds = tk->raw_sec;
nsec = (u32)(tk->tkr_raw.xtime_nsec >> tk->tkr_raw.shift);
tk->tkr_raw.base = ns_to_ktime(seconds * NSEC_PER_SEC + nsec);
Which adds the raw_sec value and the shifted down raw xtime_nsec to the
base value.
But the read function adds the shifted down tk->tkr_raw.xtime_nsec value
another time, The result of this is that ktime_get_raw() users (which are
all internal users) see the raw time move faster then it should (the rate
at which can vary with the current size of tkr_raw.xtime_nsec), which has
resulted in at least problems with graphics rendering performance.
The change tried to match the monotonic base update logic:
seconds = (u64)(tk->xtime_sec + tk->wall_to_monotonic.tv_sec);
nsec = (u32) tk->wall_to_monotonic.tv_nsec;
tk->tkr_mono.base = ns_to_ktime(seconds * NSEC_PER_SEC + nsec);
Which adds the wall_to_monotonic.tv_nsec value, but not the
tk->tkr_mono.xtime_nsec value to the base.
To fix this, simplify the tkr_raw.base accumulation to only accumulate the
raw_sec portion, and do not include the tkr_raw.xtime_nsec portion, which
will be added at read time.
Fixes: fc6eead7c1 ("time: Clean up CLOCK_MONOTONIC_RAW time handling")
Reported-and-tested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Stephen Boyd <stephen.boyd@linaro.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Miroslav Lichvar <mlichvar@redhat.com>
Cc: Daniel Mentz <danielmentz@google.com>
Link: http://lkml.kernel.org/r/1503701824-1645-1-git-send-email-john.stultz@linaro.org
Commit 7c05126793 ("mm, fork: make dup_mmap wait for mmap_sem for
write killable") made it possible to kill a forking task while it is
waiting to acquire its ->mmap_sem for write, in dup_mmap().
However, it was overlooked that this introduced an new error path before
a reference is taken on the mm_struct's ->exe_file. Since the
->exe_file of the new mm_struct was already set to the old ->exe_file by
the memcpy() in dup_mm(), it was possible for the mmput() in the error
path of dup_mm() to drop a reference to ->exe_file which was never
taken.
This caused the struct file to later be freed prematurely.
Fix it by updating mm_init() to NULL out the ->exe_file, in the same
place it clears other things like the list of mmaps.
This bug was found by syzkaller. It can be reproduced using the
following C program:
#define _GNU_SOURCE
#include <pthread.h>
#include <stdlib.h>
#include <sys/mman.h>
#include <sys/syscall.h>
#include <sys/wait.h>
#include <unistd.h>
static void *mmap_thread(void *_arg)
{
for (;;) {
mmap(NULL, 0x1000000, PROT_READ,
MAP_POPULATE|MAP_ANONYMOUS|MAP_PRIVATE, -1, 0);
}
}
static void *fork_thread(void *_arg)
{
usleep(rand() % 10000);
fork();
}
int main(void)
{
fork();
fork();
fork();
for (;;) {
if (fork() == 0) {
pthread_t t;
pthread_create(&t, NULL, mmap_thread, NULL);
pthread_create(&t, NULL, fork_thread, NULL);
usleep(rand() % 10000);
syscall(__NR_exit_group, 0);
}
wait(NULL);
}
}
No special kernel config options are needed. It usually causes a NULL
pointer dereference in __remove_shared_vm_struct() during exit, or in
dup_mmap() (which is usually inlined into copy_process()) during fork.
Both are due to a vm_area_struct's ->vm_file being used after it's
already been freed.
Google Bug Id: 64772007
Link: http://lkml.kernel.org/r/20170823211408.31198-1-ebiggers3@gmail.com
Fixes: 7c05126793 ("mm, fork: make dup_mmap wait for mmap_sem for write killable")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org> [v4.7+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There is code duplicated over all architecture's headers for
futex_atomic_op_inuser. Namely op decoding, access_ok check for uaddr,
and comparison of the result.
Remove this duplication and leave up to the arches only the needed
assembly which is now in arch_futex_atomic_op_inuser.
This effectively distributes the Will Deacon's arm64 fix for undefined
behaviour reported by UBSAN to all architectures. The fix was done in
commit 5f16a046f8 (arm64: futex: Fix undefined behaviour with
FUTEX_OP_OPARG_SHIFT usage). Look there for an example dump.
And as suggested by Thomas, check for negative oparg too, because it was
also reported to cause undefined behaviour report.
Note that s390 removed access_ok check in d12a29703 ("s390/uaccess:
remove pointless access_ok() checks") as access_ok there returns true.
We introduce it back to the helper for the sake of simplicity (it gets
optimized away anyway).
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> [s390]
Acked-by: Chris Metcalf <cmetcalf@mellanox.com> [for tile]
Reviewed-by: Darren Hart (VMware) <dvhart@infradead.org>
Reviewed-by: Will Deacon <will.deacon@arm.com> [core/arm64]
Cc: linux-mips@linux-mips.org
Cc: Rich Felker <dalias@libc.org>
Cc: linux-ia64@vger.kernel.org
Cc: linux-sh@vger.kernel.org
Cc: peterz@infradead.org
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: sparclinux@vger.kernel.org
Cc: Jonas Bonn <jonas@southpole.se>
Cc: linux-s390@vger.kernel.org
Cc: linux-arch@vger.kernel.org
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: linux-hexagon@vger.kernel.org
Cc: Helge Deller <deller@gmx.de>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: linux-snps-arc@lists.infradead.org
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: linux-xtensa@linux-xtensa.org
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: openrisc@lists.librecores.org
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Stafford Horne <shorne@gmail.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Richard Henderson <rth@twiddle.net>
Cc: Chris Zankel <chris@zankel.net>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-parisc@vger.kernel.org
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: linux-alpha@vger.kernel.org
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: "David S. Miller" <davem@davemloft.net>
Link: http://lkml.kernel.org/r/20170824073105.3901-1-jslaby@suse.cz
kernel/irq/proc.c: In function ‘show_irq_affinity’:
include/linux/cpumask.h:24:29: warning: ‘mask’ may be used uninitialized in this function [-Wmaybe-uninitialized]
#define cpumask_bits(maskp) ((maskp)->bits)
gcc is silly, but admittedly it can't know that this won't be called with
anything else than the enumerated constants.
Shut up the warning by creating a default clause.
Fixes: 6bc6d4abd2 ("genirq/proc: Use the the accessor to report the effective affinity
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This code generates a Smatch warning:
kernel/irq/irqdomain.c:1511 irq_domain_push_irq()
warn: variable dereferenced before check 'root_irq_data' (see line 1508)
irq_get_irq_data() can return a NULL pointer, but the code dereferences
the returned pointer before checking it.
Move the NULL pointer check before the dereference.
[ tglx: Rewrote changelog to be precise and conforming to the instructions
in submitting-patches and added a Fixes tag. Sigh! ]
Fixes: 495c38d300 ("irqdomain: Add irq_domain_{push,pop}_irq() functions")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: David Daney <david.daney@cavium.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: kernel-janitors@vger.kernel.org
Link: http://lkml.kernel.org/r/20170825121409.6rfv4vt6ztz2oqkt@mwanda
Currently we unconditionally destroy all sysctl bits and regenerate
them after we've rebuild the domains (even if that rebuild is a
no-op).
And since we unconditionally (re)build the sysctl for all possible
CPUs, onlining all CPUs gets us O(n^2) time. Instead change this to
only rebuild the bits for CPUs we've actually installed new domains
on.
Reported-by: Ofer Levi(SW) <oferle@mellanox.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Fix partition_sched_domains() to try and preserve the existing machine
wide domain instead of unconditionally destroying it. We do this by
attempting to allocate the new single domain, only when that fails to
we reuse the fallback_doms.
When using fallback_doms we need to first destroy and then recreate
because both the old and new could be backed by it.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Ofer Levi(SW) <oferle@mellanox.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vineet.Gupta1@synopsys.com <Vineet.Gupta1@synopsys.com>
Cc: rusty@rustcorp.com.au <rusty@rustcorp.com.au>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When disabling cpuset.sched_load_balance we expect to be able to online
CPUs without generating sched_domains. However this is currently
completely broken.
What happens is that we generate the sched_domains and then destroy
them. This is because of the spurious 'default' domain build in
cpuset_update_active_cpus(). That builds a single machine wide domain
and then schedules a work to build the 'real' domains. The work then
finds there are _no_ domains and destroys the lot again.
Furthermore, if there actually were cpusets, building the machine wide
domain is actively wrong, because it would allow tasks to 'escape' their
cpuset. Also I don't think its needed, the scheduler really should
respect the active mask.
Reported-by: Ofer Levi(SW) <oferle@mellanox.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vineet.Gupta1@synopsys.com <Vineet.Gupta1@synopsys.com>
Cc: rusty@rustcorp.com.au <rusty@rustcorp.com.au>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Mike provided a better comment for destroy_sched_domain() ...
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The new completion/crossrelease annotations interact unfavourable with
the extant flush_work()/flush_workqueue() annotations.
The problem is that when a single work class does:
wait_for_completion(&C)
and
complete(&C)
in different executions, we'll build dependencies like:
lock_map_acquire(W)
complete_acquire(C)
and
lock_map_acquire(W)
complete_release(C)
which results in the dependency chain: W->C->W, which lockdep thinks
spells deadlock, even though there is no deadlock potential since
works are ran concurrently.
One possibility would be to change the work 'lock' to recursive-read,
but that would mean hitting a lockdep limitation on recursive locks.
Also, unconditinoally switching to recursive-read here would fail to
detect the actual deadlock on single-threaded workqueues, which do
have a problem with this.
For now, forcefully disregard these locks for crossrelease.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: boqun.feng@gmail.com
Cc: byungchul.park@lge.com
Cc: david@fromorbit.com
Cc: johannes@sipsolutions.net
Cc: oleg@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The flush_work() annotation as introduced by commit:
e159489baa ("workqueue: relax lockdep annotation on flush_work()")
hits on the lockdep problem with recursive read locks.
The situation as described is:
Work W1: Work W2: Task:
ARR(Q) ARR(Q) flush_workqueue(Q)
A(W1) A(W2) A(Q)
flush_work(W2) R(Q)
A(W2)
R(W2)
if (special)
A(Q)
else
ARR(Q)
R(Q)
where: A - acquire, ARR - acquire-read-recursive, R - release.
Where under 'special' conditions we want to trigger a lock recursion
deadlock, but otherwise allow the flush_work(). The allowing is done
by using recursive read locks (ARR), but lockdep is broken for
recursive stuff.
However, there appears to be no need to acquire the lock if we're not
'special', so if we remove the 'else' clause things become much
simpler and no longer need the recursion thing at all.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: boqun.feng@gmail.com
Cc: byungchul.park@lge.com
Cc: david@fromorbit.com
Cc: johannes@sipsolutions.net
Cc: oleg@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
In an XDP redirect applications using tracepoint xdp:xdp_redirect to
diagnose TX overrun, I noticed perf_swevent_get_recursion_context()
was consuming 2% CPU. This was reduced to 1.85% with this simple
change.
Looking at the annotated asm code, it was clear that the unlikely case
in_nmi() test was chosen (by the compiler) as the most likely
event/branch. This small adjustment makes the compiler (GCC version
7.1.1 20170622 (Red Hat 7.1.1-3)) put in_nmi() as an unlikely branch.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/150342256382.16595.986861478681783732.stgit@firesoul
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The exiting/dead task has no PIDs and in this case perf_event_pid/tid()
return zero, change them to return -1 to distinguish this case from
idle threads.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho <acme@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20170822155928.GA6892@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The aux_watermark member of struct ring_buffer represents the period (in
terms of bytes) at which wakeup events should be generated when data is
written to the aux buffer in non-snapshot mode. On hardware that cannot
generate an interrupt when the aux_head reaches an arbitrary wakeup index
(such as ARM SPE), the aux_head sampled from handle->head in
perf_aux_output_{skip,end} may in fact be past the wakeup index. This
can lead to wakeup slowly falling behind the head. For example, consider
the case where hardware can only generate an interrupt on a page-boundary
and the aux buffer is initialised as follows:
// Buffer size is 2 * PAGE_SIZE
rb->aux_head = rb->aux_wakeup = 0
rb->aux_watermark = PAGE_SIZE / 2
following the first perf_aux_output_begin call, the handle is
initialised with:
handle->head = 0
handle->size = 2 * PAGE_SIZE
handle->wakeup = PAGE_SIZE / 2
and the hardware will be programmed to generate an interrupt at
PAGE_SIZE.
When the interrupt is raised, the hardware head will be at PAGE_SIZE,
so calling perf_aux_output_end(handle, PAGE_SIZE) puts the ring buffer
into the following state:
rb->aux_head = PAGE_SIZE
rb->aux_wakeup = PAGE_SIZE / 2
rb->aux_watermark = PAGE_SIZE / 2
and then the next call to perf_aux_output_begin will result in:
handle->head = handle->wakeup = PAGE_SIZE
for which the semantics are unclear and, for a smaller aux_watermark
(e.g. PAGE_SIZE / 4), then the wakeup would in fact be behind head at
this point.
This patch fixes the problem by rounding down the aux_head (as sampled
from the handle) to the nearest aux_watermark boundary when updating
rb->aux_wakeup, therefore taking into account any overruns by the
hardware.
Reported-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1502900297-21839-2-git-send-email-will.deacon@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The aux_head and aux_wakeup members of struct ring_buffer are defined
using the local_t type, despite the fact that they are only accessed via
the perf_aux_output_*() functions, which cannot race with each other for a
given ring buffer.
This patch changes the type of the members to long, so we can avoid
using the local_*() API where it isn't needed.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1502900297-21839-1-git-send-email-will.deacon@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Regardless of which events form a group, it does not make sense for the
events to target different tasks and/or CPUs, as this leaves the group
inconsistent and impossible to schedule. The core perf code assumes that
these are consistent across (successfully intialised) groups.
Core perf code only verifies this when moving SW events into a HW
context. Thus, we can violate this requirement for pure SW groups and
pure HW groups, unless the relevant PMU driver happens to perform this
verification itself. These mismatched groups subsequently wreak havoc
elsewhere.
For example, we handle watchpoints as SW events, and reserve watchpoint
HW on a per-CPU basis at pmu::event_init() time to ensure that any event
that is initialised is guaranteed to have a slot at pmu::add() time.
However, the core code only checks the group leader's cpu filter (via
event_filter_match()), and can thus install follower events onto CPUs
violating thier (mismatched) CPU filters, potentially installing them
into a CPU without sufficient reserved slots.
This can be triggered with the below test case, resulting in warnings
from arch backends.
#define _GNU_SOURCE
#include <linux/hw_breakpoint.h>
#include <linux/perf_event.h>
#include <sched.h>
#include <stdio.h>
#include <sys/prctl.h>
#include <sys/syscall.h>
#include <unistd.h>
static int perf_event_open(struct perf_event_attr *attr, pid_t pid, int cpu,
int group_fd, unsigned long flags)
{
return syscall(__NR_perf_event_open, attr, pid, cpu, group_fd, flags);
}
char watched_char;
struct perf_event_attr wp_attr = {
.type = PERF_TYPE_BREAKPOINT,
.bp_type = HW_BREAKPOINT_RW,
.bp_addr = (unsigned long)&watched_char,
.bp_len = 1,
.size = sizeof(wp_attr),
};
int main(int argc, char *argv[])
{
int leader, ret;
cpu_set_t cpus;
/*
* Force use of CPU0 to ensure our CPU0-bound events get scheduled.
*/
CPU_ZERO(&cpus);
CPU_SET(0, &cpus);
ret = sched_setaffinity(0, sizeof(cpus), &cpus);
if (ret) {
printf("Unable to set cpu affinity\n");
return 1;
}
/* open leader event, bound to this task, CPU0 only */
leader = perf_event_open(&wp_attr, 0, 0, -1, 0);
if (leader < 0) {
printf("Couldn't open leader: %d\n", leader);
return 1;
}
/*
* Open a follower event that is bound to the same task, but a
* different CPU. This means that the group should never be possible to
* schedule.
*/
ret = perf_event_open(&wp_attr, 0, 1, leader, 0);
if (ret < 0) {
printf("Couldn't open mismatched follower: %d\n", ret);
return 1;
} else {
printf("Opened leader/follower with mismastched CPUs\n");
}
/*
* Open as many independent events as we can, all bound to the same
* task, CPU0 only.
*/
do {
ret = perf_event_open(&wp_attr, 0, 0, -1, 0);
} while (ret >= 0);
/*
* Force enable/disble all events to trigger the erronoeous
* installation of the follower event.
*/
printf("Opened all events. Toggling..\n");
for (;;) {
prctl(PR_TASK_PERF_EVENTS_DISABLE, 0, 0, 0, 0);
prctl(PR_TASK_PERF_EVENTS_ENABLE, 0, 0, 0, 0);
}
return 0;
}
Fix this by validating this requirement regardless of whether we're
moving events.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Zhou Chengming <zhouchengming1@huawei.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1498142498-15758-1-git-send-email-mark.rutland@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
- Two small memory leaks in error paths.
- A missed return error code on an error path.
- A fix to check the tracing ring buffer CPU when it doesn't
exist (caused by setting maxcpus on the command line that is less
than the actual number of CPUs, and then onlining them manually).
- A fix to have the reset of boot tracers called by lateinit_sync()
instead of just lateinit(). As some of the tracers register via
lateinit(), and if the clear happens before the tracer is registered,
it will never start even though it was told to via the kernel command
line.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEQEw9Eu0DdyUUkuUUybkF8mrZjcsFAlme4DwUHHJvc3RlZHRA
Z29vZG1pcy5vcmcACgkQybkF8mrZjcssNwf+Itap7Mtbk48wJYNqfjk1pzyiOcYV
WM88EOBFM46dttVN6cBs2uUmtdvmX/g52RtsHzG6ZbwxzLE+tIGbSO2plGoknOyD
lro5CSHT2j3bu0enqkxfznDUT0PNrELEaYBoMK0yhMsXm0v+XqHUxkIqb19Ubuo+
ORPBShZghJtAiEBFArV1nXBW1kzrIFJwjymdF2ccqUlg+XxtPS1wgnZPIOjCa8ia
YM4bX3aTUh4LiUUvS7FlJsrwjB+JFOHdXu1Vg140CvJEon1a+bW4Jx88MxoN6zrp
xmFlXm/8MLWz27GO11IkveH01mSrdP67bKIIx8v2ybPBbwsW0Msb2HfZkw==
=rUJQ
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"Various bug fixes:
- Two small memory leaks in error paths.
- A missed return error code on an error path.
- A fix to check the tracing ring buffer CPU when it doesn't exist
(caused by setting maxcpus on the command line that is less than
the actual number of CPUs, and then onlining them manually).
- A fix to have the reset of boot tracers called by lateinit_sync()
instead of just lateinit(). As some of the tracers register via
lateinit(), and if the clear happens before the tracer is
registered, it will never start even though it was told to via the
kernel command line"
* tag 'trace-v4.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Fix freeing of filter in create_filter() when set_str is false
tracing: Fix kmemleak in tracing_map_array_free()
ftrace: Check for null ret_stack on profile function graph entry function
ring-buffer: Have ring_buffer_alloc_read_page() return error on offline CPU
tracing: Missing error code in tracer_alloc_buffers()
tracing: Call clear_boot_tracer() at lateinit_sync
The memory_pressure control file was incorrectly set up without
a private value (0, by default). As a result, this control
file was treated like memory_migrate on read. By adding back the
FILE_MEMORY_PRESSURE private value, the correct memory pressure value
will be returned.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Fixes: 7dbdb199d3 ("cgroup: replace cftype->mode with CFTYPE_WORLD_WRITABLE")
Cc: stable@vger.kernel.org # v4.4+
Performing the following task with kmemleak enabled:
# cd /sys/kernel/tracing/events/irq/irq_handler_entry/
# echo 'enable_event:kmem:kmalloc:3 if irq >' > trigger
# echo 'enable_event:kmem:kmalloc:3 if irq > 31' > trigger
# echo scan > /sys/kernel/debug/kmemleak
# cat /sys/kernel/debug/kmemleak
unreferenced object 0xffff8800b9290308 (size 32):
comm "bash", pid 1114, jiffies 4294848451 (age 141.139s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<ffffffff81cef5aa>] kmemleak_alloc+0x4a/0xa0
[<ffffffff81357938>] kmem_cache_alloc_trace+0x158/0x290
[<ffffffff81261c09>] create_filter_start.constprop.28+0x99/0x940
[<ffffffff812639c9>] create_filter+0xa9/0x160
[<ffffffff81263bdc>] create_event_filter+0xc/0x10
[<ffffffff812655e5>] set_trigger_filter+0xe5/0x210
[<ffffffff812660c4>] event_enable_trigger_func+0x324/0x490
[<ffffffff812652e2>] event_trigger_write+0x1a2/0x260
[<ffffffff8138cf87>] __vfs_write+0xd7/0x380
[<ffffffff8138f421>] vfs_write+0x101/0x260
[<ffffffff8139187b>] SyS_write+0xab/0x130
[<ffffffff81cfd501>] entry_SYSCALL_64_fastpath+0x1f/0xbe
[<ffffffffffffffff>] 0xffffffffffffffff
The function create_filter() is passed a 'filterp' pointer that gets
allocated, and if "set_str" is true, it is up to the caller to free it, even
on error. The problem is that the pointer is not freed by create_filter()
when set_str is false. This is a bug, and it is not up to the caller to free
the filter on error if it doesn't care about the string.
Link: http://lkml.kernel.org/r/1502705898-27571-2-git-send-email-chuhu@redhat.com
Cc: stable@vger.kernel.org
Fixes: 38b78eb85 ("tracing: Factorize filter creation")
Reported-by: Chunyu Hu <chuhu@redhat.com>
Tested-by: Chunyu Hu <chuhu@redhat.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
There's a small race when function graph shutsdown and the calling of the
registered function graph entry callback. The callback must not reference
the task's ret_stack without first checking that it is not NULL. Note, when
a ret_stack is allocated for a task, it stays allocated until the task exits.
The problem here, is that function_graph is shutdown, and a new task was
created, which doesn't have its ret_stack allocated. But since some of the
functions are still being traced, the callbacks can still be called.
The normal function_graph code handles this, but starting with commit
8861dd303c ("ftrace: Access ret_stack->subtime only in the function
profiler") the profiler code references the ret_stack on function entry, but
doesn't check if it is NULL first.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=196611
Cc: stable@vger.kernel.org
Fixes: 8861dd303c ("ftrace: Access ret_stack->subtime only in the function profiler")
Reported-by: lilydjwg@gmail.com
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
When a timer base is idle, it is forwarded when a new timer is added
to ensure that granularity does not become excessive. When not idle,
the timer tick is expected to increment the base.
However there are several problems:
- If an existing timer is modified, the base is forwarded only after
the index is calculated.
- The base is not forwarded by add_timer_on.
- There is a window after a timer is restarted from a nohz idle, after
it is marked not-idle and before the timer tick on this CPU, where a
timer may be added but the ancient base does not get forwarded.
These result in excessive granularity (a 1 jiffy timeout can blow out
to 100s of jiffies), which cause the rcu lockup detector to trigger,
among other things.
Fix this by keeping track of whether the timer base has been idle
since it was last run or forwarded, and if so then forward it before
adding a new timer.
There is still a case where mod_timer optimises the case of a pending
timer mod with the same expiry time, where the timer can see excessive
granularity relative to the new, shorter interval. A comment is added,
but it's not changed because it is an important fastpath for
networking.
This has been tested and found to fix the RCU softlockup messages.
Testing was also done with tracing to measure requested versus
achieved wakeup latencies for all non-deferrable timers in an idle
system (with no lockup watchdogs running). Wakeup latency relative to
absolute latency is calculated (note this suffers from round-up skew
at low absolute times) and analysed:
max avg std
upstream 506.0 1.20 4.68
patched 2.0 1.08 0.15
The bug was noticed due to the lockup detector Kconfig changes
dropping it out of people's .configs and resulting in larger base
clk skew When the lockup detectors are enabled, no CPU can go idle for
longer than 4 seconds, which limits the granularity errors.
Sub-optimal timer behaviour is observable on a smaller scale in that
case:
max avg std
upstream 9.0 1.05 0.19
patched 2.0 1.04 0.11
Fixes: Fixes: a683f390b9 ("timers: Forward the wheel clock whenever possible")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Tested-by: David Miller <davem@davemloft.net>
Cc: dzickus@redhat.com
Cc: sfr@canb.auug.org.au
Cc: mpe@ellerman.id.au
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: linuxarm@huawei.com
Cc: abdhalee@linux.vnet.ibm.com
Cc: John Stultz <john.stultz@linaro.org>
Cc: akpm@linux-foundation.org
Cc: paulmck@linux.vnet.ibm.com
Cc: torvalds@linux-foundation.org
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/20170822084348.21436-1-npiggin@gmail.com
No need to test for it in fast-path, every dev in bpf_dtab_netdev
is guaranteed to be non-NULL, otherwise dev_map_update_elem() will
fail in the first place.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The liveness tracking algorithm is quite subtle; add comments to explain it.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
The optimisation it does is broken when the 'new' register value has a
variable offset and the 'old' was constant. I broke it with my pointer
types unification (see Fixes tag below), before which the 'new' value
would have type PTR_TO_MAP_VALUE_ADJ and would thus not compare equal;
other changes in that patch mean that its original behaviour (ignore
min/max values) cannot be restored.
Tests on a sample set of cilium programs show no change in count of
processed instructions.
Fixes: f1174f77b5 ("bpf/verifier: rework value tracking")
Signed-off-by: Edward Cree <ecree@solarflare.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
The fact that writes occurred in reaching the continuation state does
not screen off its reads from us, because we're not really its parent.
So detect 'not really the parent' in do_propagate_liveness, and ignore
write marks in that case.
Fixes: dc503a8ad9 ("bpf/verifier: track liveness for pruning")
Signed-off-by: Edward Cree <ecree@solarflare.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
This way we don't need a block_device structure to submit I/O. The
block_device has different life time rules from the gendisk and
request_queue and is usually only available when the block device node
is open. Other callers need to explicitly create one (e.g. the lightnvm
passthrough code, or the new nvme multipathing code).
For the actual I/O path all that we need is the gendisk, which exists
once per block device. But given that the block layer also does
partition remapping we additionally need a partition index, which is
used for said remapping in generic_make_request.
Note that all the block drivers generally want request_queue or
sometimes the gendisk, so this removes a layer of indirection all
over the stack.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Workqueues don't use signals, it (ab)uses TASK_INTERRUPTIBLE to avoid
increasing the loadavg numbers. We've 'recently' introduced TASK_IDLE
for this case:
80ed87c8a9 ("sched/wait: Introduce TASK_NOLOAD and TASK_IDLE")
use it.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
When assigning an interrupt to a vcpu, it is not unlikely that
the level of the hierarchy implementing irq_set_vcpu_affinity
is not the top level (think a generic MSI domain on top of a
virtualization aware interrupt controller).
In such a case, let's iterate over the hierarchy until we find
an irqchip implementing it.
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Some minor code cleanups, while going over it I also noticed that
we're accounting the bitmap only for one CPU currently, so fix that
up as well.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, iproute2's BPF ELF loader works fine with array of maps
when retrieving the fd from a pinned node and doing a selfcheck
against the provided map attributes from the object file, but we
fail to do the same for hash of maps and thus refuse to get the
map from pinned node.
Reason is that when allocating hash of maps, fd_htab_map_alloc() will
set the value size to sizeof(void *), and any user space map creation
requests are forced to set 4 bytes as value size. Thus, selfcheck
will complain about exposed 8 bytes on 64 bit archs vs. 4 bytes from
object file as value size. Contract is that fdinfo or BPF_MAP_GET_FD_BY_ID
returns the value size used to create the map.
Fix it by handling it the same way as we do for array of maps, which
means that we leave value size at 4 bytes and in the allocation phase
round up value size to 8 bytes. alloc_htab_elem() needs an adjustment
in order to copy rounded up 8 bytes due to bpf_fd_htab_map_update_elem()
calling into htab_map_update_elem() with the pointer of the map
pointer as value. Unlike array of maps where we just xchg(), we're
using the generic htab_map_update_elem() callback also used from helper
calls, which published the key/value already on return, so we need
to ensure to memcpy() the right size.
Fixes: bcc6b1b7eb ("bpf: Add hash of maps support")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, iproute2's BPF ELF loader works fine with array of maps
when retrieving the fd from a pinned node and doing a selfcheck
against the provided map attributes from the object file, but we
fail to do the same for hash of maps and thus refuse to get the
map from pinned node.
Reason is that when allocating hash of maps, fd_htab_map_alloc() will
set the value size to sizeof(void *), and any user space map creation
requests are forced to set 4 bytes as value size. Thus, selfcheck
will complain about exposed 8 bytes on 64 bit archs vs. 4 bytes from
object file as value size. Contract is that fdinfo or BPF_MAP_GET_FD_BY_ID
returns the value size used to create the map.
Fix it by handling it the same way as we do for array of maps, which
means that we leave value size at 4 bytes and in the allocation phase
round up value size to 8 bytes. alloc_htab_elem() needs an adjustment
in order to copy rounded up 8 bytes due to bpf_fd_htab_map_update_elem()
calling into htab_map_update_elem() with the pointer of the map
pointer as value. Unlike array of maps where we just xchg(), we're
using the generic htab_map_update_elem() callback also used from helper
calls, which published the key/value already on return, so we need
to ensure to memcpy() the right size.
Fixes: bcc6b1b7eb ("bpf: Add hash of maps support")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This was reported many times, and this was even mentioned in commit
52ee2dfdd4 ("pids: refactor vnr/nr_ns helpers to make them safe") but
somehow nobody bothered to fix the obvious problem: task_tgid_nr_ns() is
not safe because task->group_leader points to nowhere after the exiting
task passes exit_notify(), rcu_read_lock() can not help.
We really need to change __unhash_process() to nullify group_leader,
parent, and real_parent, but this needs some cleanups. Until then we
can turn task_tgid_nr_ns() into another user of __task_pid_nr_ns() and
fix the problem.
Reported-by: Troy Kensinger <tkensinger@google.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In the current code, dev_map_free() can still race with dev_map_notification().
In dev_map_free(), we remove dtab from the list of dtabs after we purged
all entries from it. However, we don't do xchg() with NULL or the like,
so the entry at that point is still pointing to the device. If a unregister
notification comes in at the same time, we therefore risk a double-free,
since the pointer is still present in the map, and then pushed again to
__dev_map_entry_free().
All this is completely unnecessary. Just remove the dtab from the list
right before the synchronize_rcu(), so all outstanding readers from the
notifier list have finished by then, thus we don't need to deal with this
corner case anymore and also wouldn't need to nullify dev entires. This is
fine because we iterate over the map releasing all entries and therefore
dev references anyway.
Fixes: 4cc7b9544b ("bpf: devmap fix mutex in rcu critical section")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull perf fixes from Thomas Gleixner:
"Two fixes for the perf subsystem:
- Fix an inconsistency of RDPMC mm struct tagging across exec() which
causes RDPMC to fault.
- Correct the timestamp mechanics across IOC_DISABLE/ENABLE which
causes incorrect timestamps and total time calculations"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Fix time on IOC_ENABLE
perf/x86: Fix RDPMC vs. mm_struct tracking
Pull irq fixes from Thomas Gleixner:
"A pile of smallish changes all over the place:
- Add a missing ISB in the GIC V1 driver
- Remove an ACPI version check in the GIC V3 ITS driver
- Add the missing irq_pm_shutdown function for BRCMSTB-L2 to avoid
spurious wakeups
- Remove the artifical limitation of ITS instances to the number of
NUMA nodes which prevents utilizing the ITS hardware correctly
- Prevent a infinite parsing loop in the GIC-V3 ITS/MSI code
- Honour the force affinity argument in the GIC-V3 driver which is
required to make perf work correctly
- Correctly report allocation failures in GIC-V2/V3 to avoid using
half allocated and initialized interrupts.
- Fixup checks against nr_cpu_ids in the generic IPI code"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq/ipi: Fixup checks against nr_cpu_ids
genirq: Restore trigger settings in irq_modify_status()
MAINTAINERS: Remove Jason Cooper's irqchip git tree
irqchip/gic-v3-its-platform-msi: Fix msi-parent parsing loop
irqchip/gic-v3-its: Allow GIC ITS number more than MAX_NUMNODES
irqchip: brcmstb-l2: Define an irq_pm_shutdown function
irqchip/gic: Ensure we have an ISB between ack and ->handle_irq
irqchip/gic-v3-its: Remove ACPICA version check for ACPI NUMA
irqchip/gic-v3: Honor forced affinity setting
irqchip/gic-v3: Report failures in gic_irq_domain_alloc
irqchip/gic-v2: Report failures in gic_irq_domain_alloc
irqchip/atmel-aic: Remove root argument from ->fixup() prototype
irqchip/atmel-aic: Fix unbalanced refcount in aic_common_rtc_irq_fixup()
irqchip/atmel-aic: Fix unbalanced of_node_put() in aic_common_irq_fixup()
Pull watchdog fix from Thomas Gleixner:
"A fix for the hardlockup watchdog to prevent false positives with
extreme Turbo-Modes which make the perf/NMI watchdog fire faster than
the hrtimer which is used to verify.
Slightly larger than the minimal fix, which just would increase the
hrtimer frequency, but comes with extra overhead of more watchdog
timer interrupts and thread wakeups for all users.
With this change we restrict the overhead to the extreme Turbo-Mode
systems"
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
kernel/watchdog: Prevent false positives with turbo modes
Pull timekeepig updates from John Stultz
- kselftest improvements
- Use the proper timekeeper in the debug code
- Prevent accessing an unavailable wakeup source in the alarmtimer sysfs
interface.
Valid CPU ids are [0, nr_cpu_ids-1] inclusive.
Fixes: 3b8e29a82d ("genirq: Implement ipi_send_mask/single()")
Fixes: f9bce791ae ("genirq: Add a new function to get IPI reverse mapping")
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/20170819095751.GB27864@avx2
Avoid two successive functions calls for the map in map lookup, first
is the bpf_map_lookup_elem() helper call, and second the callback via
map->ops->map_lookup_elem() to get to the map in map implementation.
Implementation inlines array and htab flavor for map in map lookups.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 9015d2f595 ("bpf: inline htab_map_lookup_elem()") was
making the assumption that a direct call emission to the function
__htab_map_lookup_elem() will always work out for JITs.
This is currently true since all JITs we have are for 64 bit archs,
but in case of 32 bit JITs like upcoming arm32, we get a NULL pointer
dereference when executing the call to __htab_map_lookup_elem()
since passed arguments are of a different size (due to pointer args)
than what we do out of BPF. Guard and thus limit this for now for
the current 64 bit JITs only.
Reported-by: Shubham Bansal <illusionist.neo@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The current map creation API does not allow to provide the numa-node
preference. The memory usually comes from where the map-creation-process
is running. The performance is not ideal if the bpf_prog is known to
always run in a numa node different from the map-creation-process.
One of the use case is sharding on CPU to different LRU maps (i.e.
an array of LRU maps). Here is the test result of map_perf_test on
the INNER_LRU_HASH_PREALLOC test if we force the lru map used by
CPU0 to be allocated from a remote numa node:
[ The machine has 20 cores. CPU0-9 at node 0. CPU10-19 at node 1 ]
># taskset -c 10 ./map_perf_test 512 8 1260000 8000000
5:inner_lru_hash_map_perf pre-alloc 1628380 events per sec
4:inner_lru_hash_map_perf pre-alloc 1626396 events per sec
3:inner_lru_hash_map_perf pre-alloc 1626144 events per sec
6:inner_lru_hash_map_perf pre-alloc 1621657 events per sec
2:inner_lru_hash_map_perf pre-alloc 1621534 events per sec
1:inner_lru_hash_map_perf pre-alloc 1620292 events per sec
7:inner_lru_hash_map_perf pre-alloc 1613305 events per sec
0:inner_lru_hash_map_perf pre-alloc 1239150 events per sec #<<<
After specifying numa node:
># taskset -c 10 ./map_perf_test 512 8 1260000 8000000
5:inner_lru_hash_map_perf pre-alloc 1629627 events per sec
3:inner_lru_hash_map_perf pre-alloc 1628057 events per sec
1:inner_lru_hash_map_perf pre-alloc 1623054 events per sec
6:inner_lru_hash_map_perf pre-alloc 1616033 events per sec
2:inner_lru_hash_map_perf pre-alloc 1614630 events per sec
4:inner_lru_hash_map_perf pre-alloc 1612651 events per sec
7:inner_lru_hash_map_perf pre-alloc 1609337 events per sec
0:inner_lru_hash_map_perf pre-alloc 1619340 events per sec #<<<
This patch adds one field, numa_node, to the bpf_attr. Since numa node 0
is a valid node, a new flag BPF_F_NUMA_NODE is also added. The numa_node
field is honored if and only if the BPF_F_NUMA_NODE flag is set.
Numa node selection is not supported for percpu map.
This patch does not change all the kmalloc. F.e.
'htab = kzalloc()' is not changed since the object
is small enough to stay in the cache.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In check_map_func_compatibility(), a 'break' has been accidentally
removed for the BPF_MAP_TYPE_ARRAY_OF_MAPS and BPF_MAP_TYPE_HASH_OF_MAPS
cases. This patch adds it back.
Fixes: 174a79ff95 ("bpf: sockmap with sk redirect support")
Cc: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
When forcing a signal, SIGNAL_UNKILLABLE is removed to prevent recursive
faults, but this is undesirable when tracing. For example, debugging an
init process (whether global or namespace), hitting a breakpoint and
SIGTRAP will force SIGTRAP and then remove SIGNAL_UNKILLABLE.
Everything continues fine, but then once debugging has finished, the
init process is left killable which is unlikely what the user expects,
resulting in either an accidentally killed init or an init that stops
reaping zombies.
Link: http://lkml.kernel.org/r/20170815112806.10728-1-jamie.iles@oracle.com
Signed-off-by: Jamie Iles <jamie.iles@oracle.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Recursive loops with module loading were previously handled in kmod by
restricting the number of modprobe calls to 50 and if that limit was
breached request_module() would return an error and a user would see the
following on their kernel dmesg:
request_module: runaway loop modprobe binfmt-464c
Starting init:/sbin/init exists but couldn't execute it (error -8)
This issue could happen for instance when a 64-bit kernel boots a 32-bit
userspace on some architectures and has no 32-bit binary format
hanlders. This is visible, for instance, when a CONFIG_MODULES enabled
64-bit MIPS kernel boots a into o32 root filesystem and the binfmt
handler for o32 binaries is not built-in.
After commit 6d7964a722 ("kmod: throttle kmod thread limit") we now
don't have any visible signs of an error and the kernel just waits for
the loop to end somehow.
Although this *particular* recursive loop could also be addressed by
doing a sanity check on search_binary_handler() and disallowing a
modular binfmt to be required for modprobe, a generic solution for any
recursive kernel kmod issues is still needed.
This should catch these loops. We can investigate each loop and address
each one separately as they come in, this however puts a stop gap for
them as before.
Link: http://lkml.kernel.org/r/20170809234635.13443-3-mcgrof@kernel.org
Fixes: 6d7964a722 ("kmod: throttle kmod thread limit")
Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Reported-by: Matt Redfearn <matt.redfearn@imgtec.com>
Tested-by: Matt Redfearn <matt.redfearn@imgetc.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Daniel Mentz <danielmentz@google.com>
Cc: David Binderman <dcb314@hotmail.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jessica Yu <jeyu@redhat.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Michal Marek <mmarek@suse.com>
Cc: Miroslav Benes <mbenes@suse.cz>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
"map" is a valid pointer. We wanted to return "err" instead. Also
let's return a zero literal at the end.
Fixes: 174a79ff95 ("bpf: sockmap with sk redirect support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cpuset v2 has some useful behaviors that are not present in v1 because
of backward compatibility concern. One of that is the restoration of
the original cpu and memory node mask after a hot removal and addition
event sequence.
This patch makes the cpuset controller to check the
CGRP_ROOT_CPUSET_V2_MODE flag and use the v2 behavior if it is set.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
A new mount option "cpuset_v2_mode" is added to the v1 cgroupfs
filesystem to enable cpuset controller to use v2 behavior in a v1
cgroup. This mount option applies only to cpuset controller and have
no effect on other controllers.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Use rlimit() and rlimit_max() helper instead of manually writing
whole chain from task to rlimit value
Signed-off-by: Krzysztof Opasiak <k.opasiak@samsung.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20170705172548.7911-1-k.opasiak@samsung.com
The hardlockup detector on x86 uses a performance counter based on unhalted
CPU cycles and a periodic hrtimer. The hrtimer period is about 2/5 of the
performance counter period, so the hrtimer should fire 2-3 times before the
performance counter NMI fires. The NMI code checks whether the hrtimer
fired since the last invocation. If not, it assumess a hard lockup.
The calculation of those periods is based on the nominal CPU
frequency. Turbo modes increase the CPU clock frequency and therefore
shorten the period of the perf/NMI watchdog. With extreme Turbo-modes (3x
nominal frequency) the perf/NMI period is shorter than the hrtimer period
which leads to false positives.
A simple fix would be to shorten the hrtimer period, but that comes with
the side effect of more frequent hrtimer and softlockup thread wakeups,
which is not desired.
Implement a low pass filter, which checks the perf/NMI period against
kernel time. If the perf/NMI fires before 4/5 of the watchdog period has
elapsed then the event is ignored and postponed to the next perf/NMI.
That solves the problem and avoids the overhead of shorter hrtimer periods
and more frequent softlockup thread wakeups.
Fixes: 58687acba5 ("lockup_detector: Combine nmi_watchdog and softlockup detector")
Reported-and-tested-by: Kan Liang <Kan.liang@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: dzickus@redhat.com
Cc: prarit@redhat.com
Cc: ak@linux.intel.com
Cc: babu.moger@oracle.com
Cc: peterz@infradead.org
Cc: eranian@google.com
Cc: acme@redhat.com
Cc: stable@vger.kernel.org
Cc: atomlin@redhat.com
Cc: akpm@linux-foundation.org
Cc: torvalds@linux-foundation.org
Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1708150931310.1886@nanos
irq_modify_status starts by clearing the trigger settings from
irq_data before applying the new settings, but doesn't restore them,
leaving them to IRQ_TYPE_NONE.
That's pretty confusing to the potential request_irq() that could
follow. Instead, snapshot the settings before clearing them, and restore
them if the irq_modify_status() invocation was not changing the trigger.
Fixes: 1e2a7d7849 ("irqdomain: Don't set type when mapping an IRQ")
Reported-and-tested-by: jeffy <jeffy.chen@rock-chips.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jon Hunter <jonathanh@nvidia.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/20170818095345.12378-1-marc.zyngier@arm.com
For an already existing irqdomain hierarchy, as might be obtained via
a call to pci_enable_msix_range(), a PCI driver wishing to add an
additional irqdomain to the hierarchy needs to be able to insert the
irqdomain to that already initialized hierarchy. Calling
irq_domain_create_hierarchy() allows the new irqdomain to be created,
but no existing code allows for initializing the associated irq_data.
Add a couple of helper functions (irq_domain_push_irq() and
irq_domain_pop_irq()) to initialize the irq_data for the new
irqdomain added to an existing hierarchy.
Signed-off-by: David Daney <david.daney@cavium.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-gpio@vger.kernel.org
Link: http://lkml.kernel.org/r/1503017616-3252-6-git-send-email-david.daney@cavium.com
A follow-on patch will call irq_domain_free_irqs_hierarchy() when the
free() function pointer may be NULL.
Add a NULL pointer check to handle this new use case.
Signed-off-by: David Daney <david.daney@cavium.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-gpio@vger.kernel.org
Link: http://lkml.kernel.org/r/1503017616-3252-5-git-send-email-david.daney@cavium.com
The code to add and remove items to and from the revmap occurs several
times.
In preparation for the follow on patches that add more uses of this
code, factor this out in to separate static functions.
Signed-off-by: David Daney <david.daney@cavium.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-gpio@vger.kernel.org
Link: http://lkml.kernel.org/r/1503017616-3252-4-git-send-email-david.daney@cavium.com
Follow-on patch for gpio-thunderx uses a irqdomain hierarchy which
requires slightly different flow handlers, add them to chip.c which
contains most of the other flow handlers. Make these conditionally
compiled based on CONFIG_IRQ_FASTEOI_HIERARCHY_HANDLERS.
Signed-off-by: David Daney <david.daney@cavium.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-gpio@vger.kernel.org
Link: http://lkml.kernel.org/r/1503017616-3252-3-git-send-email-david.daney@cavium.com
Many of the family of functions including irq_chip_mask_parent(),
irq_chip_unmask_parent() are exported, but not all.
Add EXPORT_SYMBOL_GPL to irq_chip_enable_parent,
irq_chip_disable_parent and irq_chip_set_affinity_parent, so they
likewise are usable from modules.
Signed-off-by: David Daney <david.daney@cavium.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-gpio@vger.kernel.org
Link: http://lkml.kernel.org/r/1503017616-3252-2-git-send-email-david.daney@cavium.com
Thomas Gleixner