Convert printk() calls into corresponding pr_*() calls.
Signed-off-by: Narcisa Ana Maria Vasile <narcisaanamaria12@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The function atomisp_restore_iumit_reg is unused when PM is disabled.
Adding __maybe_unused to the function definition avoids a warning.
The function atomisp_mrfld_power_down is defined only when PM is
enabled. So in atomisp_pci_probe, it should be called only when PM is
enabled.
Signed-off-by: Jérémy Lefaure <jeremy.lefaure@lse.epita.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The css_pipe_id was checked with 'CSS_PIPE_ID_COPY' in previous if-
statement. In this case, if the css_pipe_id equals to 'CSS_PIPE_ID_COPY',
it could not enter the next if-statement. But the "next" if-statement
has the condition to check whether the css_pipe_id equals to
'CSS_PIPE_ID_COPY' or not. It should be removed.
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove braces which are not required to fix the check patch issue. The
following coccinelle script is used to fix this issue.
@@
expression e,e1;
@@
if(e)
-{
e1;
-}
Signed-off-by: Varsha Rao <rvarsha016@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove multiple blank lines, which are not required. This patch fixes
the following check patch issue:
CHECK: Please don't use multiple blank lines
Signed-off-by: Varsha Rao <rvarsha016@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The firmware for the Raspberry PI already supports simultanous output
of audio through both the HDMI and the Headphone jack. The current
implementation of ALSA doesn't expose this well to user mode since
the firmware audio is represented as a single card.
A newer approach is taken here and a virtual card is created for each
output(HDMI, Headphones, and Traditional ALSA). The firmware has
the concept of channels or streams for which the number to use is
passed in the device tree. These streams are allocated to each of the
virtual cards.
As a side effect of this change, since each output is represented
independenly it's now very easy to use PulseAudio to control the
priorities of the outputs.
Testing:
Audacity and VLC were both loaded at the same time. Each application
was assigned to a different card. With this change I was able to play
different music files at the same time through the HDMI and Headphones
jacks and control the audio independently.
Signed-off-by: Michael Zoran <mzoran@crowfest.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
https://github.com/raspberrypi/linux/issues/1447
port_parameter_get() failed to account for the header
(u32 id and u32 size) in the size before memcpying
the response into the response buffer, so overrunning
the provided buffer by 8 bytes.
Account for those bytes, and also a belt-and-braces
check to ensure we never copy more than *value_size
bytes into value.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
Signed-off-by: Michael Zoran <mzoran@crowfest.net>
Tested-by: Michael Zoran <mzoran@crowfest.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adding the 'bool' symbol brought back a randconfig build bug that
I had fixed before:
drivers/staging/built-in.o: In function `vchiq_probe':
(.text+0x1da30): undefined reference to `rpi_firmware_get'
drivers/staging/built-in.o: In function `vchiq_platform_init':
(.text+0x27494): undefined reference to `rpi_firmware_property'
The problem is that when RASPBERRYPI_FIRMWARE is a loadable module,
but BCM2835_VCHIQ can again be built-in. Making BCM_VIDEOCORE
itself tristate will make Kconfig honor the dependency correctly.
Fixes: 6bbfe4a761 ("staging: vc04_services: Create new BCM_VIDEOCORE setting for VideoCore services.")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, if pservice is null then service is set to NULL and immediately
afterwards service is dereferenced causing a null pointer dereference. Fix
this by bailing out early of the function with a null return.
Detected by CoverityScan, CID#1419681 ("Explicit null dereferenced")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If v4l2_subdev_call() gets the global frame interval values,
it returned 0 and it could be checked whether numerator is zero or not.
If the numerator is not zero, the fps could be calculated in this function.
If not, it just returns 0.
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Instead of logging this just report ERANGE as an error, which will give something close to the
right user space report.
The others of these were already removed by Dan Carpenter's patch.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The V4L2_FIELD_ANY is zero, so the (!field) is same meaning
with (field == V4L2_FIELD_ANY) in if-statement.
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It doesn't need to have else statement after return.
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Without ACPI, some of the code fails to build:
media/atomisp/platform/intel-mid/atomisp_gmin_platform.c: In function 'atomisp_register_i2c_module':
media/atomisp/platform/intel-mid/atomisp_gmin_platform.c:174:7: error: dereferencing pointer to incomplete type 'struct acpi_device'
We could work around that in the code, but since we already have a hard
dependency on x86, adding the ACPI dependency seems to be the easiest
solution.
Fixes: a49d25364d ("staging/atomisp: Add support for the Intel IPU v2")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Without CONFIG_PCI, config space reads never return any data,
leading to undefined behavior that gcc warns about:
platform/intel-mid/intel_mid_pcihelpers.c: In function 'intel_mid_msgbus_read32_raw':
platform/intel-mid/intel_mid_pcihelpers.c:66:9: error: 'data' is used uninitialized in this function [-Werror=uninitialized]
platform/intel-mid/intel_mid_pcihelpers.c: In function 'intel_mid_msgbus_read32_raw_ext':
platform/intel-mid/intel_mid_pcihelpers.c:84:9: error: 'data' is used uninitialized in this function [-Werror=uninitialized]
platform/intel-mid/intel_mid_pcihelpers.c: In function 'intel_mid_msgbus_read32':
platform/intel-mid/intel_mid_pcihelpers.c:137:9: error: 'data' is used uninitialized in this function [-Werror=uninitialized]
With a dependency on CONFIG_PCI, we don't get this warning. This seems
safe as PCI config space accessors should always return something
when PCI is enabled.
Fixes: a49d25364d ("staging/atomisp: Add support for the Intel IPU v2")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The driver fails to build if this is disabled, so we need an explicit
Kconfig dependency:
drivers/staging/media/atomisp/pci/atomisp2/./atomisp_cmd.c:6085:48: error: 'struct v4l2_subdev_fh' has no member named 'pad'
Fixes: a49d25364d ("staging/atomisp: Add support for the Intel IPU v2")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
I ran into a build warning on my randconfig build box:
drivers/staging/media/atomisp/pci/atomisp2/css2400/sh_css_params.c: In function 'ia_css_lace_statistics_free':
drivers/staging/media/atomisp/pci/atomisp2/css2400/sh_css_params.c:2845:64: error: parameter 'me' set but not used [-Werror=unused-but-set-parameter]
It turns out that not only the parameter is unused but the entire function has no
caller. Let's just remove it.
Fixes: a49d25364d ("staging/atomisp: Add support for the Intel IPU v2")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ia_css_dequeue_param_buffers does not have an arguement type, causing a warning:
drivers/staging/media/atomisp/pci/atomisp2/css2400/sh_css_params.c: In function 'ia_css_dequeue_param_buffers':
drivers/staging/media/atomisp/pci/atomisp2/css2400/sh_css_params.c:3728:6: error: old-style function definition [-Werror=old-style-definition]
This adds a 'void' keywork to silence the warning.
Fixes: a49d25364d ("staging/atomisp: Add support for the Intel IPU v2")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Defining a debug function to nothing causes a warning with an empty block
after if()/else():
drivers/staging/media/atomisp/i2c/ov2680.c: In function 'ov2680_s_stream':
drivers/staging/media/atomisp/i2c/ov2680.c:1208:55: error: suggest braces around empty body in an 'else' statement [-Werror=empty-body]
This changes the empty debug statement to dev_dbg(), which by default also
does nothing, but avoids this warning and also checks the format string.
As a side-effect, we can now use dynamic debugging to turn on the
output at runtime.
Fixes: a49d25364d ("staging/atomisp: Add support for the Intel IPU v2")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Two dependencies were missing to build atomisp drivers:
_ MEDIA_CONTROLLER: to use the entity field of v4l2_subdev structure. Since
every atomisp driver needs MEDIA_CONTROLLER has a dependency, let's add it
to INTEL_ATOMISP
_ EFI: to use efivar_entry_get:
drivers/built-in.o: In function `gmin_get_config_var':
(.text+0xe062b): undefined reference to `efivar_entry_get'
Signed-off-by: Jérémy Lefaure <jeremy.lefaure@lse.epita.fr>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
REGMAP_I2C should be enabled to build the driver ap1302 because it uses
regmap functions.
Signed-off-by: Jérémy Lefaure <jeremy.lefaure@lse.epita.fr>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are some error paths in atomisp_css_frame_allocate() which don't
initialize "res" so it could lead us to try release random memory.
Fixes: a49d25364d ("staging/atomisp: Add support for the Intel IPU v2")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We call this function with the lock held and should also return with the
lock held as well. This one error path is not-consistent because we
should return without the lock held.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The first of these checks the PCI identifier in order to decide what to do so needs no
ifdef. The other is simply a variation on what is dumped for debug - so favour dumping the
most.
Signed-off-by Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This was reported by Dan Carpenter. When we error with an IMX 227 we don't release
the lock and the sensor would then hang.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is a do nothing function so we can replace it with nothing and eliminate it entirely.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Our driver only ever uses one set of routines for the allocators used by the CSS layer to
manage memory and the memory management on the ISP. We can thus remove the function vectors
and simply call the intended routines directly.
These routines in turn are simply wrappers around another layer of code so remove this
second layer of wrappers and call the hrt methods directly. In time we can remove this layer
of indirection as well.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We don't need this layer of indirection and the debugging information is not used. With
this removed we can then go on to try and remove the abstraction layer entirely.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The aa kernel is used but it consists of nothing more than a set of wrappers
for a memset and an assignment. Replace these at the calling points with the
memset and assignment.
Keep the structures for now - those should disappear as the next layer up
gets unwrapped.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
While this is included and the headers pulled in nothing actually uses this
functionality in the driver, so remove it.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In an effort to create a more uniform coding style within the Unisys
s-Par driver set, this patch adjusts the formatting of all #define
directives within this source file to match the following template,
and thereby eliminate irregular usage of whitespace:
Reviewed-by: Tim Sell <timothy.sell@unisys.com>
The amount of whitespace used between the <token> and the <value> is
dependent on what is needed to make the surrounding #define directives
as uniform as possible.
Signed-off-by: David Binder <david.binder@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In an effort to create a more uniform coding style within the Unisys
s-Par driver set, this patch adjusts the formatting of all #define
directives within this source file to match the following template,
and thereby eliminate irregular usage of whitespace:
Reviewed-by: Tim Sell <timothy.sell@unisys.com>
The amount of whitespace used between the <token> and the <value> is
dependent on what is needed to make the surrounding #define directives
as uniform as possible.
Signed-off-by: David Binder <david.binder@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In an effort to create a more uniform coding style within the Unisys
s-Par driver set, this patch adjusts the formatting of all #define
directives within this source file to match the following template,
and thereby eliminate irregular usage of whitespace:
Reviewed-by: Tim Sell <timothy.sell@unisys.com>
The amount of whitespace used between the <token> and the <value> is
dependent on what is needed to make the surrounding #define directives
as uniform as possible.
Signed-off-by: David Binder <david.binder@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In an effort to create a more uniform coding style within the Unisys
s-Par driver set, this patch adjusts the formatting of all #define
directives within this source file to match the following template,
and thereby eliminate irregular usage of whitespace:
Reviewed-by: Tim Sell <timothy.sell@unisys.com>
The amount of whitespace used between the <token> and the <value> is
dependent on what is needed to make the surrounding #define directives
as uniform as possible.
Signed-off-by: David Binder <david.binder@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In an effort to create a more uniform coding style within the Unisys
s-Par driver set, this patch adjusts the formatting of all #define
directives within this source file to match the following template,
and thereby eliminate irregular usage of whitespace:
Reviewed-by: Tim Sell <timothy.sell@unisys.com>
The amount of whitespace used between the <token> and the <value> is
dependent on what is needed to make the surrounding #define directives
as uniform as possible.
Signed-off-by: David Binder <david.binder@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In an effort to create a more uniform coding style within the Unisys
s-Par driver set, this patch adjusts the formatting of all #define
directives within this source file to match the following template,
and thereby eliminate irregular usage of whitespace:
Reviewed-by: Tim Sell <timothy.sell@unisys.com>
The amount of whitespace used between the <token> and the <value> is
dependent on what is needed to make the surrounding #define directives
as uniform as possible.
Signed-off-by: David Binder <david.binder@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In an effort to create a more uniform coding style within the Unisys
s-Par driver set, this patch adjusts the formatting of all #define
directives within this source file to match the following template,
and thereby eliminate irregular usage of whitespace:
Reviewed-by: Tim Sell <timothy.sell@unisys.com>
The amount of whitespace used between the <token> and the <value> is
dependent on what is needed to make the surrounding #define directives
as uniform as possible.
Signed-off-by: David Binder <david.binder@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In an effort to create a more uniform coding style within the Unisys
s-Par driver set, this patch adjusts the formatting of all #define
directives within this source file to match the following template,
and thereby eliminate irregular usage of whitespace:
Reviewed-by: Tim Sell <timothy.sell@unisys.com>
The amount of whitespace used between the <token> and the <value> is
dependent on what is needed to make the surrounding #define directives
as uniform as possible.
Signed-off-by: David Binder <david.binder@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In an effort to create a more uniform coding style within the Unisys
s-Par driver set, this patch adjusts the formatting of all #define
directives within this source file to match the following template,
and thereby eliminate irregular usage of whitespace:
Reviewed-by: Tim Sell <timothy.sell@unisys.com>
The amount of whitespace used between the <token> and the <value> is
dependent on what is needed to make the surrounding #define directives
as uniform as possible.
Signed-off-by: David Binder <david.binder@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In an effort to create a more uniform coding style within the Unisys
s-Par driver set, this patch adjusts the formatting of all #define
directives within this source file to match the following template,
and thereby eliminate irregular usage of whitespace:
Reviewed-by: Tim Sell <timothy.sell@unisys.com>
The amount of whitespace used between the <token> and the <value> is
dependent on what is needed to make the surrounding #define directives
as uniform as possible.
Signed-off-by: David Binder <david.binder@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In an effort to create a more uniform coding style within the Unisys
s-Par driver set, this patch adjusts the formatting of all #define
directives within this source file to match the following template,
and thereby eliminate irregular usage of whitespace:
Reviewed-by: Tim Sell <timothy.sell@unisys.com>
The amount of whitespace used between the <token> and the <value> is
dependent on what is needed to make the surrounding #define directives
as uniform as possible.
Signed-off-by: David Binder <david.binder@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch removes the #pragma directive from visorchannel.h
and adds the __packed keyword to all structs to suppress structure
padding.
Signed-off-by: Jon Frisch <jon.frisch@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Tim Sell <timothy.sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch removes inline functions in visornic_main.c.
Signed-off-by: Jon Frisch <jon.frisch@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Tim Sell <timothy.sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch removes comments that are no longer relevant
in channel.h.
Signed-off-by: Jon Frisch <jon.frisch@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Tim Sell <timothy.sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch removes the unused function declarations
in channel.h.
Signed-off-by: Jon Frisch <jon.frisch@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Tim Sell <timothy.sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch removes the unused macro lengthof.
Signed-off-by: Jon Frisch <jon.frisch@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Tim Sell <timothy.sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Removes unnecessary cast of to __iomem of a non-io-mapped pointer, thereby
eliminating the following sparse warning:
visorchannel.c:159:17: warning: cast adds address space to expression (<asn:2>)
Signed-off-by: David Binder <david.binder@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Tim Sell <timothy.sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The function spar_check_channel_client shouldn't need to do
readq's, it is referencing a local copy of the channel
header. Simplify it to just access the fields directly.
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Tim Sell <timothy.sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Narcisa Ana Maria Vasile