Commit Graph

242 Commits

Author SHA1 Message Date
Paul E. McKenney d685514260 rcutorture: Allow pointer leaks to test diagnostic code
This commit adds an rcutorture.leakpointer module parameter that
intentionally leaks an RCU-protected pointer out of the RCU read-side
critical section and checks to see if the corresponding grace period
has elapsed, emitting a WARN_ON_ONCE() if so.  This module parameter can
be used to test facilities like CONFIG_RCU_STRICT_GRACE_PERIOD that end
grace periods quickly.

While in the area, also document rcutorture.irqreader, which was
previously left out.

Reported-by Jann Horn <jannh@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2020-08-24 18:45:36 -07:00
Paul E. McKenney 299c7d94f6 rcutorture: Hoist OOM registry up one level
Currently, registering and unregistering the OOM notifier is done
right before and after the test, respectively.  This will not work
well for multi-threaded tests, so this commit hoists this registering
and unregistering up into the rcu_torture_fwd_prog_init() and
rcu_torture_fwd_prog_cleanup() functions.

Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2020-08-24 18:45:35 -07:00
Paul E. McKenney 57f602022e rcutorture: Properly synchronize with OOM notifier
The current rcutorture forward-progress code assumes that it is the
only cause of out-of-memory (OOM) events.  For script-based rcutorture
testing, this assumption is in fact correct.  However, testing based
on modprobe/rmmod might well encounter external OOM events, which could
happen at any time.

This commit therefore properly synchronizes the interaction between
rcutorture's forward-progress testing and its OOM notifier by adding a
global mutex.

Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2020-08-24 18:45:34 -07:00
Paul E. McKenney c8fa637147 rcutorture: Properly set rcu_fwds for OOM handling
The conversion of rcu_fwds to dynamic allocation failed to actually
allocate the required structure.  This commit therefore allocates it,
frees it, and updates rcu_fwds accordingly.  While in the area, it
abstracts the cleanup actions into rcu_torture_fwd_prog_cleanup().

Fixes: 5155be9994 ("rcutorture: Dynamically allocate rcu_fwds structure")
Reported-by: kernel test robot <rong.a.chen@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2020-08-24 18:45:34 -07:00
Joel Fernandes (Google) 959954df0c rcutorture: Output number of elapsed grace periods
This commit adds code to print the grace-period number at the start
of the test along with both the grace-period number and the number of
elapsed grace periods at the end of the test.  Note that variants of
RCU)without the notion of a grace-period number (for example, Tiny RCU)
just print zeroes.

[ paulmck: Adjust commit log. ]
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2020-08-24 18:45:31 -07:00
Paul E. McKenney 83224afd11 rcutorture: Remove KCSAN stubs
KCSAN is now in mainline, so this commit removes the stubs for the
data_race(), ASSERT_EXCLUSIVE_WRITER(), and ASSERT_EXCLUSIVE_ACCESS()
macros.

Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2020-08-24 18:45:31 -07:00
Linus Torvalds 6d2b84a4e5 This tree adds the sched_set_fifo*() encapsulation APIs to remove
static priority level knowledge from non-scheduler code.
 
 The three APIs for non-scheduler code to set SCHED_FIFO are:
 
  - sched_set_fifo()
  - sched_set_fifo_low()
  - sched_set_normal()
 
 These are two FIFO priority levels: default (high), and a 'low' priority level,
 plus sched_set_normal() to set the policy back to non-SCHED_FIFO.
 
 Since the changes affect a lot of non-scheduler code, we kept this in a separate
 tree.
 
 When merging to the latest upstream tree there's a conflict in drivers/spi/spi.c,
 which can be resolved via:
 
 	sched_set_fifo(ctlr->kworker_task);
 
 Signed-off-by: Ingo Molnar <mingo@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAl8pPQIRHG1pbmdvQGtl
 cm5lbC5vcmcACgkQEnMQ0APhK1j0Jw/+LlSyX6gD2ATy3cizGL7DFPZogD5MVKTb
 IXbhXH/ACpuPQlBe1+haRLbJj6XfXqbOlAleVKt7eh+jZ1jYjC972RCSTO4566mJ
 0v8Iy9kkEeb2TDbYx1H3bnk78lf85t0CB+sCzyKUYFuTrXU04eRj7MtN3vAQyRQU
 xJg83x/sT5DGdDTP50sL7lpbwk3INWkD0aDCJEaO/a9yHElMsTZiZBKoXxN/s30o
 FsfzW56jqtng771H2bo8ERN7+abwJg10crQU5mIaLhacNMETuz0NZ/f8fY/fydCL
 Ju8HAdNKNXyphWkAOmixQuyYtWKe2/GfbHg8hld0jmpwxkOSTgZjY+pFcv7/w306
 g2l1TPOt8e1n5jbfnY3eig+9Kr8y0qHkXPfLfgRqKwMMaOqTTYixEzj+NdxEIRX9
 Kr7oFAv6VEFfXGSpb5L1qyjIGVgQ5/JE/p3OC3GHEsw5VKiy5yjhNLoSmSGzdS61
 1YurVvypSEUAn3DqTXgeGX76f0HH365fIKqmbFrUWxliF+YyflMhtrj2JFtejGzH
 Md3RgAzxusE9S6k3gw1ev4byh167bPBbY8jz0w3Gd7IBRKy9vo92h6ZRYIl6xeoC
 BU2To1IhCAydIr6hNsIiCSDTgiLbsYQzPuVVovUxNh+l1ZvKV2X+csEHhs8oW4pr
 4BRU7dKL2NE=
 =/7JH
 -----END PGP SIGNATURE-----

Merge tag 'sched-fifo-2020-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull sched/fifo updates from Ingo Molnar:
 "This adds the sched_set_fifo*() encapsulation APIs to remove static
  priority level knowledge from non-scheduler code.

  The three APIs for non-scheduler code to set SCHED_FIFO are:

   - sched_set_fifo()
   - sched_set_fifo_low()
   - sched_set_normal()

  These are two FIFO priority levels: default (high), and a 'low'
  priority level, plus sched_set_normal() to set the policy back to
  non-SCHED_FIFO.

  Since the changes affect a lot of non-scheduler code, we kept this in
  a separate tree"

* tag 'sched-fifo-2020-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
  sched,tracing: Convert to sched_set_fifo()
  sched: Remove sched_set_*() return value
  sched: Remove sched_setscheduler*() EXPORTs
  sched,psi: Convert to sched_set_fifo_low()
  sched,rcutorture: Convert to sched_set_fifo_low()
  sched,rcuperf: Convert to sched_set_fifo_low()
  sched,locktorture: Convert to sched_set_fifo()
  sched,irq: Convert to sched_set_fifo()
  sched,watchdog: Convert to sched_set_fifo()
  sched,serial: Convert to sched_set_fifo()
  sched,powerclamp: Convert to sched_set_fifo()
  sched,ion: Convert to sched_set_normal()
  sched,powercap: Convert to sched_set_fifo*()
  sched,spi: Convert to sched_set_fifo*()
  sched,mmc: Convert to sched_set_fifo*()
  sched,ivtv: Convert to sched_set_fifo*()
  sched,drm/scheduler: Convert to sched_set_fifo*()
  sched,msm: Convert to sched_set_fifo*()
  sched,psci: Convert to sched_set_fifo*()
  sched,drbd: Convert to sched_set_fifo*()
  ...
2020-08-06 11:55:43 -07:00
Paul E. McKenney 13625c0a40 Merge branches 'doc.2020.06.29a', 'fixes.2020.06.29a', 'kfree_rcu.2020.06.29a', 'rcu-tasks.2020.06.29a', 'scale.2020.06.29a', 'srcu.2020.06.29a' and 'torture.2020.06.29a' into HEAD
doc.2020.06.29a:  Documentation updates.
fixes.2020.06.29a:  Miscellaneous fixes.
kfree_rcu.2020.06.29a:  kfree_rcu() updates.
rcu-tasks.2020.06.29a:  RCU Tasks updates.
scale.2020.06.29a:  Read-side scalability tests.
srcu.2020.06.29a:  SRCU updates.
torture.2020.06.29a:  Torture-test updates.
2020-06-29 12:03:15 -07:00
Paul E. McKenney 7752275118 rcutorture: Check for unwatched readers
RCU is supposed to be watching all non-idle kernel code and also all
softirq handlers.  This commit adds some teeth to this statement by
adding a WARN_ON_ONCE().

Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2020-06-29 12:01:44 -07:00
Jules Irenge 8f43d5911b rcu/rcutorture: Replace 0 with false
Coccinelle reports a warning

WARNING: Assignment of 0/1 to bool variable

The root cause is that the variable lastphase is a bool, but is
initialised with integer 0.  This commit therefore replaces the 0 with
a false.

Signed-off-by: Jules Irenge <jbi.octave@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2020-06-29 12:01:44 -07:00
Paul E. McKenney cae7cc6ba5 rcutorture: NULL rcu_torture_current earlier in cleanup code
Currently, the rcu_torture_current variable remains non-NULL until after
all readers have stopped.  During this time, rcu_torture_stats_print()
will think that the test is still ongoing, which can result in confusing
dmesg output.  This commit therefore NULLs rcu_torture_current immediately
after the rcu_torture_writer() kthread has decided to stop, thus informing
rcu_torture_stats_print() much sooner.

Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2020-06-29 12:01:44 -07:00
Paul E. McKenney 4a5f133c15 rcutorture: Add races with task-exit processing
Several variants of Linux-kernel RCU interact with task-exit processing,
including preemptible RCU, Tasks RCU, and Tasks Trace RCU.  This commit
therefore adds testing of this interaction to rcutorture by adding
rcutorture.read_exit_burst and rcutorture.read_exit_delay kernel-boot
parameters.  These kernel parameters control the frequency and spacing
of special read-then-exit kthreads that are spawned.

[ paulmck: Apply feedback from Dan Carpenter's static checker. ]
[ paulmck: Reduce latency to avoid false-positive shutdown hangs. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2020-06-29 12:01:44 -07:00
Mauro Carvalho Chehab 43cb5451df docs: RCU: Convert torture.txt to ReST
- Add a SPDX header;
- Adjust document and section titles;
- Some whitespace fixes and new line breaks;
- Mark literal blocks as such;
- Add it to RCU/index.rst.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2020-06-29 11:58:11 -07:00
Peter Zijlstra 8b700983de sched: Remove sched_set_*() return value
Ingo suggested that since the new sched_set_*() functions are
implemented using the 'nocheck' variants, they really shouldn't ever
fail, so remove the return value.

Cc: axboe@kernel.dk
Cc: daniel.lezcano@linaro.org
Cc: sudeep.holla@arm.com
Cc: airlied@redhat.com
Cc: broonie@kernel.org
Cc: paulmck@kernel.org
Suggested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
2020-06-15 14:10:26 +02:00
Peter Zijlstra ce1c8afd3f sched,rcutorture: Convert to sched_set_fifo_low()
Because SCHED_FIFO is a broken scheduler model (see previous patches)
take away the priority field, the kernel can't possibly make an
informed decision.

Effectively no change.

Cc: paulmck@kernel.org
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
2020-06-15 14:10:25 +02:00
Paul E. McKenney f736e0f1a5 Merge branches 'fixes.2020.04.27a', 'kfree_rcu.2020.04.27a', 'rcu-tasks.2020.04.27a', 'stall.2020.04.27a' and 'torture.2020.05.07a' into HEAD
fixes.2020.04.27a:  Miscellaneous fixes.
kfree_rcu.2020.04.27a:  Changes related to kfree_rcu().
rcu-tasks.2020.04.27a:  Addition of new RCU-tasks flavors.
stall.2020.04.27a:  RCU CPU stall-warning updates.
torture.2020.05.07a:  Torture-test updates.
2020-05-07 10:18:32 -07:00
Paul E. McKenney 3c80b40245 rcutorture: Convert ULONG_CMP_LT() to time_before()
This commit converts three ULONG_CMP_LT() invocations in rcutorture to
time_before() to reflect the fact that they are comparing timestamps to
the jiffies counter.

Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2020-05-07 10:15:29 -07:00
Jason Yan afbc1574f1 rcutorture: Make rcu_fwds and rcu_fwd_emergency_stop static
This commit fixes the following sparse warning:

kernel/rcu/rcutorture.c:1695:16: warning: symbol 'rcu_fwds' was not declared. Should it be static?
kernel/rcu/rcutorture.c:1696:6: warning: symbol 'rcu_fwd_emergency_stop' was not declared. Should it be static?

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2020-05-07 10:15:29 -07:00
Paul E. McKenney 55b2dcf587 rcu: Allow rcutorture to starve grace-period kthread
This commit provides an rcutorture.stall_gp_kthread module parameter
to allow rcutorture to starve the grace-period kthread.  This allows
testing the code that detects such starvation.

Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2020-05-07 10:15:28 -07:00
Paul E. McKenney 19a8ff956c rcutorture: Add flag to produce non-busy-wait task stalls
This commit aids testing of RCU task stall warning messages by adding
an rcutorture.stall_cpu_block module parameter that results in the
induced stall sleeping within the RCU read-side critical section.
Spinning with interrupts disabled is still available via the
rcutorture.stall_cpu_irqsoff module parameter, and specifying neither
of these two module parameters will spin with preemption disabled.

Note that sleeping (as opposed to preemption) results in additional
complaints from RCU at context-switch time, so yet more testing.

Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2020-05-07 10:15:28 -07:00
Paul E. McKenney c9527bebb0 rcutorture: Mark data-race potential for rcu_barrier() test statistics
The n_barrier_successes, n_barrier_attempts, and
n_rcu_torture_barrier_error variables are updated (without access
markings) by the main rcu_barrier() test kthread, and accessed (also
without access markings) by the rcu_torture_stats() kthread.  This of
course can result in KCSAN complaints.

Because the accesses are in diagnostic prints, this commit uses
data_race() to excuse the diagnostic prints from the data race.  If this
were to ever cause bogus statistics prints (for example, due to store
tearing), any misleading information would be disambiguated by the
presence or absence of an rcutorture splat.

This data race was reported by KCSAN.  Not appropriate for backporting
due to failure being unlikely and due to the mild consequences of the
failure, namely a confusing rcutorture console message.

Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
2020-04-27 11:05:13 -07:00
Paul E. McKenney 3b2a473985 rcutorture: Add KCSAN stubs
This commit adds stubs for KCSAN's data_race(), ASSERT_EXCLUSIVE_WRITER(),
and ASSERT_EXCLUSIVE_ACCESS() macros to allow code using these macros to
move ahead.

Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2020-04-27 11:05:13 -07:00
Paul E. McKenney c1a76c0b6a rcutorture: Add torture tests for RCU Tasks Trace
This commit adds the definitions required to torture the tracing flavor
of RCU tasks.

Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2020-04-27 11:03:51 -07:00
Paul E. McKenney 3d6e43c75d rcutorture: Add torture tests for RCU Tasks Rude
This commit adds the definitions required to torture the rude flavor of
RCU tasks.

Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2020-04-27 11:03:51 -07:00
Paul E. McKenney 9cf8fc6fab rcutorture: Add a test for synchronize_rcu_mult()
This commit adds a crude test for synchronize_rcu_mult().  This is
currently a smoke test rather than a high-quality stress test.

Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2020-04-27 11:03:51 -07:00
Paul E. McKenney 52b1fc3f79 rcutorture: Add test of holding scheduler locks across rcu_read_unlock()
Now that it should be safe to hold scheduler locks across
rcu_read_unlock(), even in cases where the corresponding RCU read-side
critical section might have been preempted and boosted, the commit adds
a test of this capability to rcutorture.  This has been tested on current
mainline (which can deadlock in this situation), and lockdep duly reported
the expected deadlock.  On -rcu, lockdep is silent, thus far, anyway.

Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2020-04-27 11:03:50 -07:00
Paul E. McKenney 9470a18fab rcutorture: Manually clean up after rcu_barrier() failure
Currently, if rcu_barrier() returns too soon, the test waits 100ms and
then does another instance of the test.  However, if rcu_barrier() were
to have waited for more than 100ms too short a time, this could cause
the test's rcu_head structures to be reused while they were still on
RCU's callback lists.  This can result in knock-on errors that obscure
the original rcu_barrier() test failure.

This commit therefore adds code that attempts to wait until all of
the test's callbacks have been invoked.  Of course, if RCU completely
lost track of the corresponding rcu_head structures, this wait could be
forever.  This commit therefore also complains if this attempted recovery
takes more than one second, and it also gives up when the test ends.

Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2020-02-20 16:03:31 -08:00
Paul E. McKenney 50d4b62970 rcutorture: Make rcu_torture_barrier_cbs() post from corresponding CPU
Currently, rcu_torture_barrier_cbs() posts callbacks from whatever CPU
it is running on, which means that all these kthreads might well be
posting from the same CPU, which would drastically reduce the effectiveness
of this test.  This commit therefore uses IPIs to make the callbacks be
posted from the corresponding CPU (given by local variable myid).

If the IPI fails (which can happen if the target CPU is offline or does
not exist at all), the callback is posted on whatever CPU is currently
running.

Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2020-02-20 16:03:31 -08:00
Paul E. McKenney 5396d31d3a rcutorture: Annotation lockless accesses to rcu_torture_current
The rcutorture global variable rcu_torture_current is accessed locklessly,
so it must use the RCU pointer load/store primitives.  This commit
therefore adds several that were missed.

This data race was reported by KCSAN.  Not appropriate for backporting due
to failure being unlikely and due to this being used only by rcutorture.

Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2020-02-20 16:03:31 -08:00
Paul E. McKenney f042a436c8 rcutorture: Add READ_ONCE() to rcu_torture_count and rcu_torture_batch
The rcutorture rcu_torture_count and rcu_torture_batch per-CPU variables
are read locklessly, so this commit adds the READ_ONCE() to a load in
order to avoid various types of compiler vandalism^Woptimization.

This data race was reported by KCSAN. Not appropriate for backporting
due to failure being unlikely and due to this being rcutorture.

Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2020-02-20 16:03:31 -08:00
Paul E. McKenney 102c14d2f8 rcutorture: Fix stray access to rcu_fwd_cb_nodelay
The rcu_fwd_cb_nodelay variable suppresses excessively long read-side
delays while carrying out an rcutorture forward-progress test.  As such,
it is accessed both by readers and updaters, and most of the accesses
therefore use *_ONCE().  Except for one in rcu_read_delay(), which this
commit fixes.

This data race was reported by KCSAN.  Not appropriate for backporting
due to this being rcutorture.

Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2020-02-20 16:03:31 -08:00
Paul E. McKenney 202489101f rcutorture: Fix rcu_torture_one_read()/rcu_torture_writer() data race
The ->rtort_pipe_count field in the rcu_torture structure checks for
too-short grace periods, and is therefore read by rcutorture's readers
while being updated by rcutorture's writers.  This commit therefore
adds the needed READ_ONCE() and WRITE_ONCE() invocations.

This data race was reported by KCSAN.  Not appropriate for backporting
due to failure being unlikely and due to this being rcutorture.

Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2020-02-20 16:03:31 -08:00
Paul E. McKenney 4ab00bdd99 rcutorture: Suppress boottime bad-sequence warnings
In normal production, an excessively long wait on a grace period
(synchronize_rcu(), for example) at boottime is often just as bad
as at any other time.  In fact, given the desire for fast boot, any
sort of long wait at boot is a bad idea.  However, heavy rcutorture
testing on large hyperthreaded systems can generate such long waits
during boot as a matter of course.  This commit therefore causes
the rcupdate.rcu_cpu_stall_suppress_at_boot kernel boot parameter to
suppress reporting of bootime bad-sequence warning due to excessively
long grace-period waits.

Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2020-02-20 16:03:30 -08:00
Paul E. McKenney 58c53360b3 rcutorture: Allow boottime stall warnings to be suppressed
In normal production, an RCU CPU stall warning at boottime is often
just as bad as at any other time.  In fact, given the desire for fast
boot, any sort of long-term stall at boot is a bad idea.  However,
heavy rcutorture testing on large hyperthreaded systems can generate
boottime RCU CPU stalls as a matter of course.  This commit therefore
provides a kernel boot parameter that suppresses reporting of boottime
RCU CPU stall warnings and similarly of rcutorture writer stalls.

Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2020-02-20 16:03:30 -08:00
Paul E. McKenney 435508095a rcutorture: Refrain from callback flooding during boot
Additional rcutorture aggression can result in, believe it or not,
boot times in excess of three minutes on large hyperthreaded systems.
This is long enough for rcutorture to decide to do some callback flooding,
which seems a bit excessive given that userspace cannot have started
until long after boot, and it is userspace that does the real-world
callback flooding.  Worse yet, because Tiny RCU lacks forward-progress
functionality, the looping-in-the-kernel tests can also be problematic
during early boot.

This commit therefore causes rcutorture to hold off on callback
flooding until about the time that init is spawned, and the same
for looping-in-the-kernel tests for Tiny RCU.

Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2020-02-20 16:03:30 -08:00
Paul E. McKenney 59ee0326cc rcutorture: Suppress forward-progress complaints during early boot
Some larger systems can take in excess of 50 seconds to complete their
early boot initcalls prior to spawing init.  This does not in any way
help the forward-progress judgments of built-in rcutorture (when
rcutorture is built as a module, the insmod or modprobe command normally
cannot happen until some time after boot completes).  This commit
therefore suppresses such complaints until about the time that init
is spawned.

This also includes a fix to a stupid error located by kbuild test robot.

[ paulmck: Apply kbuild test robot feedback. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
[ paulmck: Fix to nohz_full slow-expediting recovery logic, per bpetkov. ]
[ paulmck: Restrict splat to CONFIG_PREEMPT_RT=y kernels and simplify. ]
Tested-by: Borislav Petkov <bp@alien8.de>
2020-02-20 16:03:30 -08:00
Paul E. McKenney 0e247386d9 Merge branches 'doc.2019.12.10a', 'exp.2019.12.09a', 'fixes.2020.01.24a', 'kfree_rcu.2020.01.24a', 'list.2020.01.10a', 'preempt.2020.01.24a' and 'torture.2019.12.09a' into HEAD
doc.2019.12.10a: Documentations updates
exp.2019.12.09a: Expedited grace-period updates
fixes.2020.01.24a: Miscellaneous fixes
kfree_rcu.2020.01.24a: Batch kfree_rcu() work
list.2020.01.10a: RCU-protected-list updates
preempt.2020.01.24a: Preemptible RCU updates
torture.2019.12.09a: Torture-test updates
2020-01-24 10:37:27 -08:00
Paul E. McKenney 5155be9994 rcutorture: Dynamically allocate rcu_fwds structure
This commit switches from static structure to dynamic allocation
for rcu_fwds as another step towards providing multiple call_rcu()
forward-progress kthreads.

Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2019-12-09 13:00:29 -08:00
Paul E. McKenney 6764100bd2 rcutorture: Complete threading rcu_fwd pointers through functions
This commit threads pointers to rcu_fwd structures through the remaining
functions using rcu_fwds directly, namely rcu_torture_fwd_prog_cbfree(),
rcutorture_oom_notify() and rcu_torture_fwd_prog_init().

Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2019-12-09 13:00:28 -08:00
Paul E. McKenney 7beba0c06b rcutorture: Move to dynamic initialization of rcu_fwds
In order to add multiple call_rcu() forward-progress kthreads, it will
be necessary to dynamically allocate and initialize.  This commit
therefore moves the initialization from compile time to instead
immediately precede thread-creation time.

Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2019-12-09 13:00:28 -08:00
Paul E. McKenney 6b1b832546 rcutorture: Thread rcu_fwd pointer through forward-progress functions
In order to add multiple kthreads, it will be necessary to allow
the various functions to operate on a pointer to their kthread's
rcu_fwd structure.  This commit therefore starts the process of
adding the needed "struct rcu_fwd" parameters and arguments to the
various callback forward-progress functions.

Note that rcutorture_oom_notify() and rcu_torture_fwd_cb_hist() will
eventually need to iterate over all kthreads' rcu_fwd structures.

Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2019-12-09 13:00:28 -08:00
Paul E. McKenney a289e608b3 rcutorture: Pull callback forward-progress data into rcu_fwd struct
Now that RCU behaves reasonably well with the current single-kthread
call_rcu() forward-progress testing, it is time to add more kthreads.
This commit takes a first step towards that goal by wrapping what
will be the per-kthread data into a new rcu_fwd structure.

Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2019-12-09 13:00:27 -08:00
Sebastian Andrzej Siewior 90326f0521 rcu: Use CONFIG_PREEMPTION where appropriate
The config option `CONFIG_PREEMPT' is used for the preemption model
"Low-Latency Desktop". The config option `CONFIG_PREEMPTION' is enabled
when kernel preemption is enabled which is true for the preemption model
`CONFIG_PREEMPT' and `CONFIG_PREEMPT_RT'.

Use `CONFIG_PREEMPTION' if it applies to both preemption models and not
just to `CONFIG_PREEMPT'.

Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: rcu@vger.kernel.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2019-12-09 12:37:51 -08:00
Paul E. McKenney 8dcdfb7096 Merge branches 'doc.2019.10.29a', 'fixes.2019.10.30a', 'nohz.2019.10.28a', 'replace.2019.10.30a', 'torture.2019.10.05a' and 'lkmm.2019.10.05a' into HEAD
doc.2019.10.29a: RCU documentation updates.
fixes.2019.10.30a: RCU miscellaneous fixes.
nohz.2019.10.28a: RCU NO_HZ and NO_HZ_FULL updates.
replace.2019.10.30a: Replace rcu_swap_protected() with rcu_replace().
torture.2019.10.05a: RCU torture-test updates.

lkmm.2019.10.05a: Linux kernel memory model updates.
2019-10-30 08:47:13 -07:00
Paul E. McKenney fbbd5e358c rcutorture: Make in-kernel-loop testing more brutal
The rcu_torture_fwd_prog_nr() tests the ability of RCU to tolerate
in-kernel busy loops.  It invokes rcu_torture_fwd_prog_cond_resched()
within its delay loop, which, in PREEMPT && NO_HZ_FULL kernels results
in the occasional direct call to schedule().  Now, this direct call to
schedule() is appropriate for call_rcu() flood testing, in which either
the kernel should restrain itself or userspace transitions will supply
the needed restraint.  But in pure in-kernel loops, the occasional
cond_resched() should do the job.

This commit therefore makes rcu_torture_fwd_prog_nr() use cond_resched()
instead of rcu_torture_fwd_prog_cond_resched() in order to increase the
brutality of this aspect of rcutorture testing.

Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2019-10-05 11:50:18 -07:00
Paul E. McKenney 8b5ddf8b99 rcutorture: Separate warnings for each failure type
Currently, each of six different types of failure triggers a
single WARN_ON_ONCE(), and it is then necessary to stare at the
rcu_torture_stats(), Reader Pipe, and Reader Batch lines looking for
inappropriately non-zero values.  This can be annoying and error-prone,
so this commit provides a separate WARN_ON_ONCE() for each of the
six error conditions and adds short comments to each to ease error
identification.

Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2019-10-05 11:50:03 -07:00
Paul E. McKenney 79ba7ff5a9 rcutorture: Emulate dyntick aspect of userspace nohz_full sojourn
During an actual call_rcu() flood, there would be frequent trips to
userspace (in-kernel call_rcu() floods must be otherwise housebroken).
Userspace execution on nohz_full CPUs implies an RCU dyntick idle/not-idle
transition pair, so this commit adds emulation of that pair.

Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2019-10-05 10:46:05 -07:00
Paul E. McKenney d38e6dc6ed rcutorture: Force on tick for readers and callback flooders
Readers and callback flooders in the rcutorture stress-test suite run for
extended time periods by design.  They do take pains to relinquish the
CPU from time to time, but in some cases this relies on the scheduler
being active, which in turn relies on the scheduler-clock interrupt
firing from time to time.

This commit therefore forces scheduling-clock interrupts within
these loops.  While in the area, this commit also prevents
rcu_torture_reader()'s occasional timed sleeps from delaying shutdown.

[ paulmck: Apply Joel Fernandes TICK_DEP_MASK_RCU->TICK_DEP_BIT_RCU fix. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2019-10-05 10:46:04 -07:00
Paul E. McKenney f7a81b12d6 rcu/nocb: Print no-CBs diagnostics when rcutorture writer unduly delayed
This commit causes locking, sleeping, and callback state to be printed
for no-CBs CPUs when the rcutorture writer is delayed sufficiently for
rcutorture to complain.

Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
2019-08-13 14:38:24 -07:00
Paul E. McKenney 60013d5d2b rcutorture: Aggressive forward-progress tests shouldn't block shutdown
The more aggressive forward-progress tests can interfere with rcutorture
shutdown, resulting in false-positive diagnostics.  This commit therefore
ends any such tests 30 seconds prior to shutdown.

Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
2019-08-01 14:30:22 -07:00