The CONNECT X300 uses the PMC clock for on-board components and gets
stuck during boot if the clock is disabled. Therefore, add this
device to the critical systems list.
Tested on CONNECT X300.
Fixes: 648e921888 ("clk: x86: Stop marking clocks as CLK_IS_CRITICAL")
Signed-off-by: Michael Haener <michael.haener@siemens.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
At least on the HP Envy x360 15-cp0xxx model the WMI interface
for HPWMI_FEATURE2_QUERY requires an outsize of at least 128 bytes,
otherwise it fails with an error code 5 (HPWMI_RET_INVALID_PARAMETERS):
Dec 06 00:59:38 kernel: hp_wmi: query 0xd returned error 0x5
We do not care about the contents of the buffer, we just want to know
if the HPWMI_FEATURE2_QUERY command is supported.
This commits bumps the buffer size, fixing the error.
Fixes: 8a1513b493 ("hp-wmi: limit hotkey enable")
Cc: stable@vger.kernel.org
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1520703
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
This is a follow-up commit for the sysfs attributes to change
from DRIVER_ATTR to DEVICE_ATTR according to some initial comments.
In such case, it's better to point the sysfs path to the device
itself instead of the driver. The ABI document is also updated.
Fixes: 79e29cb8fb ("platform/mellanox: Add bootctl driver for Mellanox BlueField Soc")
Signed-off-by: Liming Sun <lsun@mellanox.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Fix the following sparse warning:
fs/xfs/libxfs/xfs_trans_resv.c:206:1: warning: symbol 'xfs_rtalloc_log_count' was not declared. Should it be static?
Fixes: b1de6fc752 ("xfs: fix log reservation overflows when allocating large rt extents")
Signed-off-by: Chen Wandun <chenwandun@huawei.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
gnttab_request_version() always sets the gnttab_interface variable
and the assertions to check for empty gnttab_interface is unnecessary.
The patch eliminates multiple such assertions.
Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
By simply re-attaching to shared rings during connect_ring() rather than
assuming they are freshly allocated (i.e assuming the counters are zero)
it is possible for vbd instances to be unbound and re-bound from and to
(respectively) a running guest.
This has been tested by running:
while true;
do fio --name=randwrite --ioengine=libaio --iodepth=16 \
--rw=randwrite --bs=4k --direct=1 --size=1G --verify=crc32;
done
in a PV guest whilst running:
while true;
do echo vbd-$DOMID-$VBD >unbind;
echo unbound;
sleep 5;
echo vbd-$DOMID-$VBD >bind;
echo bound;
sleep 3;
done
in dom0 from /sys/bus/xen-backend/drivers/vbd to continuously unbind and
re-bind its system disk image.
This is a highly useful feature for a backend module as it allows it to be
unloaded and re-loaded (i.e. updated) without requiring domUs to be halted.
This was also tested by running:
while true;
do echo vbd-$DOMID-$VBD >unbind;
echo unbound;
sleep 5;
rmmod xen-blkback;
echo unloaded;
sleep 1;
modprobe xen-blkback;
echo bound;
cd $(pwd);
sleep 3;
done
in dom0 whilst running the same loop as above in the (single) PV guest.
Some (less stressful) testing has also been done using a Windows HVM guest
with the latest 9.0 PV drivers installed.
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Currently these macros are defined to re-initialize a front/back ring
(respectively) to values read from the shared ring in such a way that any
requests/responses that are added to the shared ring whilst the front/back
is detached will be skipped over. This, in general, is not a desirable
semantic since most frontend implementations will eventually block waiting
for a response which would either never appear or never be processed.
Since the macros are currently unused, take this opportunity to re-define
them to re-initialize a front/back ring using specified values. This also
allows FRONT/BACK_RING_INIT() to be re-defined in terms of
FRONT/BACK_RING_ATTACH() using a specified value of 0.
NOTE: BACK_RING_ATTACH() will be used directly in a subsequent patch.
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
If a driver probe() fails then leave the xenstore state alone. There is no
reason to modify it as the failure may be due to transient resource
allocation issues and hence a subsequent probe() may succeed.
If the driver supports re-binding then only force state to closed during
remove() only in the case when the toolstack may need to clean up. This can
be detected by checking whether the state in xenstore has been set to
closing prior to device removal.
NOTE: Re-bind support is indicated by new boolean in struct xenbus_driver,
which defaults to false. Subsequent patches will add support to
some backend drivers.
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
...and make it static
xenbus_dev_shutdown() is seemingly intended to cause clean shutdown of PV
frontends when a guest is rebooted. Indeed the function waits for a
conpletion which is only set by a call to xenbus_frontend_closed().
This patch removes the shutdown() method from backends and moves
xenbus_dev_shutdown() from xenbus_probe.c into xenbus_probe_frontend.c,
renaming it appropriately and making it static.
NOTE: In the case where the backend is running in a driver domain, the
toolstack should have already terminated any frontends that may be
using it (since Xen does not support re-startable PV driver domains)
so xenbus_dev_shutdown() should never be called.
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Clang warns:
../drivers/block/xen-blkfront.c:1117:4: warning: misleading indentation;
statement is not part of the previous 'if' [-Wmisleading-indentation]
nr_parts = PARTS_PER_DISK;
^
../drivers/block/xen-blkfront.c:1115:3: note: previous statement is here
if (err)
^
This is because there is a space at the beginning of this line; remove
it so that the indentation is consistent according to the Linux kernel
coding style and clang no longer warns.
While we are here, the previous line has some trailing whitespace; clean
that up as well.
Fixes: c80a420995 ("xen-blkfront: handle Xen major numbers other than XENVBD")
Link: https://github.com/ClangBuiltLinux/linux/issues/791
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
The sifive_l2_cache.c is in no way related to RISC-V architecture
memory management. It is a little stub driver working around the fact
that the EDAC maintainers prefer their drivers to be structured in a
certain way that doesn't fit the SiFive SOCs.
Move the file to drivers/soc and add a Kconfig option for it, as well
as the whole drivers/soc boilerplate for CONFIG_SOC_SIFIVE.
Fixes: a967a289f1 ("RISC-V: sifive_l2_cache: Add L2 cache controller driver for SiFive SoCs")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Borislav Petkov <bp@suse.de>
[paul.walmsley@sifive.com: keep the MAINTAINERS change specific to the L2$ controller code]
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
pfn_to_page & page_to_pfn depend on vmemmap being available before the calls
if kernel is configured with CONFIG_SPARSEMEM_VMEMMAP=y. This was caused
by NOMMU changes which moved vmemmap definition bellow functions definitions
calling pfn_to_page & page_to_pfn.
Noticed while compiled 5.5-rc2 kernel for Fedora/RISCV.
v2:
- Add a comment for vmemmap in source
Signed-off-by: David Abdurachmanov <david.abdurachmanov@sifive.com>
Fixes: 6bd33e1ece ("riscv: add nommu support")
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
This patch fixes that the sscratch register clearing in M-mode. It cleared
sscratch register in M-mode, but it should clear mscratch register. That will
cause kernel trap if the CPU core doesn't support S-mode when trying to access
sscratch.
Fixes: 9e80635619 ("riscv: clear the instruction cache and all registers when booting")
Signed-off-by: Greentime Hu <greentime.hu@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
In Kconfig files, config options are written without the CONFIG_ prefix.
Fixes: 6bd33e1ece ("riscv: add nommu support")
Signed-off-by: Andreas Schwab <schwab@suse.de>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Andrey Ignatov says:
====================
v3->v4:
- use OPTS_VALID and OPTS_GET to handle bpf_prog_attach_opts.
v2->v3:
- rely on DECLARE_LIBBPF_OPTS from libbpf_common.h;
- separate "required" and "optional" arguments in bpf_prog_attach_xattr;
- convert test_cgroup_attach to prog_tests;
- move the new selftest to prog_tests/cgroup_attach_multi.
v1->v2:
- move DECLARE_LIBBPF_OPTS from libbpf.h to bpf.h (patch 4);
- switch new libbpf API to OPTS framework;
- switch selftest to libbpf OPTS framework.
This patch set adds support for replacing cgroup-bpf programs attached with
BPF_F_ALLOW_MULTI flag so that any program in a list can be updated to a new
version without service interruption and order of programs can be preserved.
Please see patch 3 for details on the use-case and API changes.
Other patches:
Patch 1 is preliminary refactoring of __cgroup_bpf_attach to simplify it.
Patch 2 is minor cleanup of hierarchy_allows_attach.
Patch 4 extends libbpf API to support new set of attach attributes.
Patch 5 converts test_cgroup_attach to prog_tests.
Patch 6 adds selftest coverage for the new API.
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Test replacing a cgroup-bpf program attached with BPF_F_ALLOW_MULTI and
possible failure modes: invalid combination of flags, invalid
replace_bpf_fd, replacing a non-attachd to specified cgroup program.
Example of program replacing:
# gdb -q --args ./test_progs --name=cgroup_attach_multi
...
Breakpoint 1, test_cgroup_attach_multi () at cgroup_attach_multi.c:227
(gdb)
[1]+ Stopped gdb -q --args ./test_progs --name=cgroup_attach_multi
# bpftool c s /mnt/cgroup2/cgroup-test-work-dir/cg1
ID AttachType AttachFlags Name
2133 egress multi
2134 egress multi
# fg
gdb -q --args ./test_progs --name=cgroup_attach_multi
(gdb) c
Continuing.
Breakpoint 2, test_cgroup_attach_multi () at cgroup_attach_multi.c:233
(gdb)
[1]+ Stopped gdb -q --args ./test_progs --name=cgroup_attach_multi
# bpftool c s /mnt/cgroup2/cgroup-test-work-dir/cg1
ID AttachType AttachFlags Name
2139 egress multi
2134 egress multi
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/7b9b83e8d5fb82e15b034341bd40b6fb2431eeba.1576741281.git.rdna@fb.com
Convert test_cgroup_attach to prog_tests.
This change does a lot of things but in many cases it's pretty expensive
to separate them, so they go in one commit. Nevertheless the logic is
ketp as is and changes made are just moving things around, simplifying
them (w/o changing the meaning of the tests) and making prog_tests
compatible:
* split the 3 tests in the file into 3 separate files in prog_tests/;
* rename the test functions to test_<file_base_name>;
* remove unused includes, constants, variables and functions from every
test;
* replace `if`-s with or `if (CHECK())` where additional context should
be logged and with `if (CHECK_FAIL())` where line number is enough;
* switch from `log_err()` to logging via `CHECK()`;
* replace `assert`-s with `CHECK_FAIL()` to avoid crashing the whole
test_progs if one assertion fails;
* replace cgroup_helpers with test__join_cgroup() in
cgroup_attach_override only, other tests need more fine-grained
control for cgroup creation/deletion so cgroup_helpers are still used
there;
* simplify cgroup_attach_autodetach by switching to easiest possible
program since this test doesn't really need such a complicated program
as cgroup_attach_multi does;
* remove test_cgroup_attach.c itself.
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/0ff19cc64d2dc5cf404349f07131119480e10e32.1576741281.git.rdna@fb.com
Introduce a new bpf_prog_attach_xattr function that, in addition to
program fd, target fd and attach type, accepts an extendable struct
bpf_prog_attach_opts.
bpf_prog_attach_opts relies on DECLARE_LIBBPF_OPTS macro to maintain
backward and forward compatibility and has the following "optional"
attach attributes:
* existing attach_flags, since it's not required when attaching in NONE
mode. Even though it's quite often used in MULTI and OVERRIDE mode it
seems to be a good idea to reduce number of arguments to
bpf_prog_attach_xattr;
* newly introduced attribute of BPF_PROG_ATTACH command: replace_prog_fd
that is fd of previously attached cgroup-bpf program to replace if
BPF_F_REPLACE flag is used.
The new function is named to be consistent with other xattr-functions
(bpf_prog_test_run_xattr, bpf_create_map_xattr, bpf_load_program_xattr).
The struct bpf_prog_attach_opts is supposed to be used with
DECLARE_LIBBPF_OPTS macro.
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/bd6e0732303eb14e4b79cb128268d9e9ad6db208.1576741281.git.rdna@fb.com
The common use-case in production is to have multiple cgroup-bpf
programs per attach type that cover multiple use-cases. Such programs
are attached with BPF_F_ALLOW_MULTI and can be maintained by different
people.
Order of programs usually matters, for example imagine two egress
programs: the first one drops packets and the second one counts packets.
If they're swapped the result of counting program will be different.
It brings operational challenges with updating cgroup-bpf program(s)
attached with BPF_F_ALLOW_MULTI since there is no way to replace a
program:
* One way to update is to detach all programs first and then attach the
new version(s) again in the right order. This introduces an
interruption in the work a program is doing and may not be acceptable
(e.g. if it's egress firewall);
* Another way is attach the new version of a program first and only then
detach the old version. This introduces the time interval when two
versions of same program are working, what may not be acceptable if a
program is not idempotent. It also imposes additional burden on
program developers to make sure that two versions of their program can
co-exist.
Solve the problem by introducing a "replace" mode in BPF_PROG_ATTACH
command for cgroup-bpf programs being attached with BPF_F_ALLOW_MULTI
flag. This mode is enabled by newly introduced BPF_F_REPLACE attach flag
and bpf_attr.replace_bpf_fd attribute to pass fd of the old program to
replace
That way user can replace any program among those attached with
BPF_F_ALLOW_MULTI flag without the problems described above.
Details of the new API:
* If BPF_F_REPLACE is set but replace_bpf_fd doesn't have valid
descriptor of BPF program, BPF_PROG_ATTACH will return corresponding
error (EINVAL or EBADF).
* If replace_bpf_fd has valid descriptor of BPF program but such a
program is not attached to specified cgroup, BPF_PROG_ATTACH will
return ENOENT.
BPF_F_REPLACE is introduced to make the user intent clear, since
replace_bpf_fd alone can't be used for this (its default value, 0, is a
valid fd). BPF_F_REPLACE also makes it possible to extend the API in the
future (e.g. add BPF_F_BEFORE and BPF_F_AFTER if needed).
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Andrii Narkyiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/30cd850044a0057bdfcaaf154b7d2f39850ba813.1576741281.git.rdna@fb.com
__cgroup_bpf_attach has a lot of identical code to handle two scenarios:
BPF_F_ALLOW_MULTI is set and unset.
Simplify it by splitting the two main steps:
* First, the decision is made whether a new bpf_prog_list entry should
be allocated or existing entry should be reused for the new program.
This decision is saved in replace_pl pointer;
* Next, replace_pl pointer is used to handle both possible states of
BPF_F_ALLOW_MULTI flag (set / unset) instead of doing similar work for
them separately.
This splitting, in turn, allows to make further simplifications:
* The check for attaching same program twice in BPF_F_ALLOW_MULTI mode
can be done before allocating cgroup storage, so that if user tries to
attach same program twice no alloc/free happens as it was before;
* pl_was_allocated becomes redundant so it's removed.
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/c6193db6fe630797110b0d3ff06c125d093b834c.1576741281.git.rdna@fb.com
Björn Töpel says:
====================
This series aims to simplify the XDP maps and
xdp_do_redirect_map()/xdp_do_flush_map(), and to crank out some more
performance from XDP_REDIRECT scenarios.
The first part of the series simplifies all XDP_REDIRECT capable maps,
so that __XXX_flush_map() does not require the map parameter, by
moving the flush list from the map to global scope.
This results in that the map_to_flush member can be removed from
struct bpf_redirect_info, and its corresponding logic.
Simpler code, and more performance due to that checks/code per-packet
is moved to flush.
Pre-series performance:
$ sudo taskset -c 22 ./xdpsock -i enp134s0f0 -q 20 -n 1 -r -z
sock0@enp134s0f0:20 rxdrop xdp-drv
pps pkts 1.00
rx 20,797,350 230,942,399
tx 0 0
$ sudo ./xdp_redirect_cpu --dev enp134s0f0 --cpu 22 xdp_cpu_map0
Running XDP/eBPF prog_name:xdp_cpu_map5_lb_hash_ip_pairs
XDP-cpumap CPU:to pps drop-pps extra-info
XDP-RX 20 7723038 0 0
XDP-RX total 7723038 0
cpumap_kthread total 0 0 0
redirect_err total 0 0
xdp_exception total 0 0
Post-series performance:
$ sudo taskset -c 22 ./xdpsock -i enp134s0f0 -q 20 -n 1 -r -z
sock0@enp134s0f0:20 rxdrop xdp-drv
pps pkts 1.00
rx 21,524,979 86,835,327
tx 0 0
$ sudo ./xdp_redirect_cpu --dev enp134s0f0 --cpu 22 xdp_cpu_map0
Running XDP/eBPF prog_name:xdp_cpu_map5_lb_hash_ip_pairs
XDP-cpumap CPU:to pps drop-pps extra-info
XDP-RX 20 7840124 0 0
XDP-RX total 7840124 0
cpumap_kthread total 0 0 0
redirect_err total 0 0
xdp_exception total 0 0
Results: +3.5% and +1.5% for the ubenchmarks.
v1->v2 [1]:
* Removed 'unused-variable' compiler warning (Jakub)
[1] https://lore.kernel.org/bpf/20191218105400.2895-1-bjorn.topel@gmail.com/
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Now that all XDP maps that can be used with bpf_redirect_map() tracks
entries to be flushed in a global fashion, there is not need to track
that the map has changed and flush from xdp_do_generic_map()
anymore. All entries will be flushed in xdp_do_flush_map().
This means that the map_to_flush can be removed, and the corresponding
checks. Moving the flush logic to one place, xdp_do_flush_map(), give
a bulking behavior and performance boost.
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20191219061006.21980-8-bjorn.topel@gmail.com
The cpumap flush list is used to track entries that need to flushed
from via the xdp_do_flush_map() function. This list used to be
per-map, but there is really no reason for that. Instead make the
flush list global for all devmaps, which simplifies __cpu_map_flush()
and cpu_map_alloc().
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20191219061006.21980-7-bjorn.topel@gmail.com
The devmap flush list is used to track entries that need to flushed
from via the xdp_do_flush_map() function. This list used to be
per-map, but there is really no reason for that. Instead make the
flush list global for all devmaps, which simplifies __dev_map_flush()
and dev_map_init_map().
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20191219061006.21980-6-bjorn.topel@gmail.com
The xskmap flush list is used to track entries that need to flushed
from via the xdp_do_flush_map() function. This list used to be
per-map, but there is really no reason for that. Instead make the
flush list global for all xskmaps, which simplifies __xsk_map_flush()
and xsk_map_alloc().
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20191219061006.21980-5-bjorn.topel@gmail.com
After the RCU flavor consolidation [1], call_rcu() and
synchronize_rcu() waits for preempt-disable regions (NAPI) in addition
to the read-side critical sections. As a result of this, the cleanup
code in cpumap can be simplified
* There is no longer a need to flush in __cpu_map_entry_free, since we
know that this has been done when the call_rcu() callback is
triggered.
* When freeing the map, there is no need to explicitly wait for a
flush. It's guaranteed to be done after the synchronize_rcu() call
in cpu_map_free().
[1] https://lwn.net/Articles/777036/
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20191219061006.21980-3-bjorn.topel@gmail.com
After the RCU flavor consolidation [1], call_rcu() and
synchronize_rcu() waits for preempt-disable regions (NAPI) in addition
to the read-side critical sections. As a result of this, the cleanup
code in devmap can be simplified
* There is no longer a need to flush in __dev_map_entry_free, since we
know that this has been done when the call_rcu() callback is
triggered.
* When freeing the map, there is no need to explicitly wait for a
flush. It's guaranteed to be done after the synchronize_rcu() call
in dev_map_free(). The rcu_barrier() is still needed, so that the
map is not freed prior the elements.
[1] https://lwn.net/Articles/777036/
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20191219061006.21980-2-bjorn.topel@gmail.com
Clang warns
../drivers/nfc/pn544/pn544.c:696:4: warning: misleading indentation;
statement is not part of the previous 'if' [-Wmisleading-indentation]
return nfc_hci_send_cmd(hdev, NFC_HCI_RF_READER_A_GATE,
^
../drivers/nfc/pn544/pn544.c:692:3: note: previous statement is here
if (target->nfcid1_len != 4 && target->nfcid1_len != 7 &&
^
1 warning generated.
This warning occurs because there is a space after the tab on this line.
Remove it so that the indentation is consistent with the Linux kernel
coding style and clang no longer warns.
Fixes: da052850b9 ("NFC: Add pn544 presence check for different targets")
Link: https://github.com/ClangBuiltLinux/linux/issues/814
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Doug Berger says:
====================
net: bcmgenet: Turn on offloads by default
This commit stack is based on Florian's commit 4e8aedfe78c7 ("net:
systemport: Turn on offloads by default") and enables the offloads for
the bcmgenet driver by default.
The first commit adds support for the HIGHDMA feature to the driver.
The second converts the Tx checksum implementation to use the generic
hardware logic rather than the deprecated IP centric methods.
The third modifies the Rx checksum implementation to use the hardware
offload to compute the complete checksum rather than filtering out bad
packets detected by the hardware's IP centric implementation. This may
increase processing load by passing bad packets to the network stack,
but it provides for more flexible handling of packets by the network
stack without requiring software computation of the checksum.
The remaining commits mirror the extensions Florian made to the sysport
driver to retain symmetry with that driver and to make the benefits of
the hardware offloads more ubiquitous.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
When inserting the TSB, keep track of how many times we had to do
it and if there was a failure in doing so, this helps profile the
driver for possibly incorrect headroom settings.
Signed-off-by: Doug Berger <opendmb@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
During bcmgenet_put_tx_csum() make sure we differentiate a SKB
headroom re-allocation failure from the normal swap and replace
path.
Signed-off-by: Doug Berger <opendmb@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We can turn on the RX/TX checksum offloads and the scatter/gather
features by default and make sure that those are properly reflected
back to e.g: stacked devices such as VLAN.
Signed-off-by: Doug Berger <opendmb@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
During driver resume and open, the HW may have lost its context/state,
utilize bcmgenet_set_features() to make sure we do restore the correct
set of features that were previously configured.
Signed-off-by: Doug Berger <opendmb@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In preparation for unconditionally enabling TX and RX checksum
offloads, refactor bcmgenet_set_features() a bit such that
__netdev_update_features() during register_netdev() can make sure
that features are correctly programmed during network device
registration.
Since we can now be called during register_netdev() with clocks
gated, we need to temporarily turn them on/off in order to have a
successful register programming.
We also move the CRC forward setting read into
bcmgenet_set_features() since priv->crc_fwd_en matters while
turning on RX checksum offload, that way we are guaranteed they
are in sync in case we ever add support for NETIF_F_RXFCS at some
point in the future.
Signed-off-by: Doug Berger <opendmb@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit updates the Rx checksum offload behavior of the driver
to use the more generic CHECKSUM_COMPLETE method that supports all
protocols over the CHECKSUM_UNNECESSARY method that only applies
to some protocols known by the hardware.
This behavior is perceived to be superior.
Signed-off-by: Doug Berger <opendmb@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The GENET hardware should be capable of generating IP checksums
using the NETIF_F_HW_CSUM feature, so switch to using that feature
instead of the depricated NETIF_F_IP_CSUM and NETIF_F_IPV6_CSUM.
Signed-off-by: Doug Berger <opendmb@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit configures the DMA masks for the GENET driver and
sets the NETIF_F_HIGHDMA flag to report support of the feature.
Signed-off-by: Doug Berger <opendmb@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
SYSTEMPORT is capabable of doing up to 40-bit of physical addresses, set
an appropriate DMA mask to permit that.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Davide Caratti says:
====================
net/sched: cls_u32: fix refcount leak
a refcount leak in the error path of u32_change() has been recently
introduced. It can be observed with the following commands:
[root@f31 ~]# tc filter replace dev eth0 ingress protocol ip prio 97 \
> u32 match ip src 127.0.0.1/32 indev notexist20 flowid 1:1 action drop
RTNETLINK answers: Invalid argument
We have an error talking to the kernel
[root@f31 ~]# tc filter replace dev eth0 ingress protocol ip prio 98 \
> handle 42:42 u32 divisor 256
Error: cls_u32: Divisor can only be used on a hash table.
We have an error talking to the kernel
[root@f31 ~]# tc filter replace dev eth0 ingress protocol ip prio 99 \
> u32 ht 47:47
Error: cls_u32: Specified hash table not found.
We have an error talking to the kernel
they all legitimately return -EINVAL; however, they leave semi-configured
filters at eth0 tc ingress:
[root@f31 ~]# tc filter show dev eth0 ingress
filter protocol ip pref 97 u32 chain 0
filter protocol ip pref 97 u32 chain 0 fh 800: ht divisor 1
filter protocol ip pref 98 u32 chain 0
filter protocol ip pref 98 u32 chain 0 fh 801: ht divisor 1
filter protocol ip pref 99 u32 chain 0
filter protocol ip pref 99 u32 chain 0 fh 802: ht divisor 1
With older kernels, filters were unconditionally considered empty (and
thus de-refcounted) on the error path of ->change().
After commit 8b64678e0a ("net: sched: refactor tp insert/delete for
concurrent execution"), filters were considered empty when the walk()
function didn't set 'walker.stop' to 1.
Finally, with commit 6676d5e416 ("net: sched: set dedicated tcf_walker
flag when tp is empty"), tc filters are considered empty unless the walker
function is called with a non-NULL handle. This last change doesn't fit
cls_u32 design, because at least the "root hnode" is (almost) always
non-NULL, as it's allocated in u32_init().
- patch 1/2 is a proposal to restore the original kernel behavior, where
no filter was installed in the error path of u32_change().
- patch 2/2 adds tdc selftests that can be ued to verify the correct
behavior of u32 in the error path of ->change().
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
- move test "e9a3 - Add u32 with source match" to u32.json, and change the
match pattern to catch all hnodes
- add testcases for relevant error paths of cls_u32 module
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
when users replace cls_u32 filters with new ones having wrong parameters,
so that u32_change() fails to validate them, the kernel doesn't roll-back
correctly, and leaves semi-configured rules.
Fix this in u32_walk(), avoiding a call to the walker function on filters
that don't have a match rule connected. The side effect is, these "empty"
filters are not even dumped when present; but that shouldn't be a problem
as long as we are restoring the original behaviour, where semi-configured
filters were not even added in the error path of u32_change().
Fixes: 6676d5e416 ("net: sched: set dedicated tcf_walker flag when tp is empty")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski says:
====================
nfp: tls: implement the stream sync RX resync
This small series adds support for using the device
in stream scan RX resync mode which improves the RX
resync success rate. Without stream scan it's pretty
much impossible to successfully resync a continuous
stream.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The simple RX resync strategy controlled by the kernel does not
guarantee as good results as if the device helps by detecting
the potential record boundaries and keeping track of them.
We've called this strategy stream scan in the tls-offload doc.
Implement this strategy for the NFP. The device sends a request
for record boundary confirmation, which is then recorded in
per-TLS socket state and responded to once record is reached.
Because the device keeps track of records passing after the
request was sent the response is not as latency sensitive as
when kernel just tries to tell the device the information
about the next record.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There is currently no way for driver to reliably check that
the socket it has looked up is in fact RX offloaded. Add
a helper. This allows drivers to catch misbehaving firmware.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make nfp_net_parse_meta() take a packet pointer and return
a drop/no drop decision. Right now it returns the end of
metadata and caller compares it to the packet pointer.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
John Hurley says:
====================
Add ipv6 tunnel support to NFP
The following patches add support for IPv6 tunnel offload to the NFP
driver.
Patches 1-2 do some code tidy up and prepare existing code for reuse in
IPv6 tunnels.
Patches 3-4 handle IPv6 tunnel decap (match) rules.
Patches 5-8 handle encap (action) rules.
Patch 9 adds IPv6 support to the merge and pre-tunnel rule functions.
v1->v2:
- fix compiler warning when building without CONFIG_IPV6 set -
Jakub Kicinski (patch 7)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Both pre-tunnel match rules and flow merge functions parse compiled
match/action fields for validation.
Update these validation functions to include IPv6 match and action fields.
Signed-off-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Haener