Stephen Rothwell reported the following warning caused by commit
f1045056c7 ("topology/sysfs: rework book and drawer topology
ifdefery"):
Documentation/admin-guide/cputopology.rst:49: WARNING: Block quote
ends without a blank line; unexpected unindent.
To fix this remove the extra indentation again.
Fixes: f1045056c7 ("topology/sysfs: rework book and drawer topology ifdefery")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Link: https://lore.kernel.org/r/Ya4Ht2K9x2+lUtuR@osiris
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
v1.0 of the ReadTheDocs theme.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAmGuS2oPHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5YYsEH/jyYembdY2dydJaVKqFgAa/IOG0SC7jfq3DQ
sOcPMSVq4OTwPYGiki4Gn8raNOkoR5JhXJ7mvZgFP5cQJdVnsOkEL1sDKakxRkLk
SvXYg3brLOjHRjRjmmbuLyZSwFquKr3lfOOLx2neTVk/xFSgTOlWY2OVEdToQ4CE
wtntgL/kfmVBJor1ScwjnX27tB1dRC0cDrsD/NpuHitw9e3QxhvBGXnLAbGZV733
1i/Ge//oD4yan/lM89et4HSbI6QCV5vdaCDtCGkZhTCXyY/AWjStcDDKPwZNjUjA
NIqDg85qeUCrMqnye4Jyl7zno2C3KDPa0XtyjOmKqIdFZC4mwRc=
=IXEs
-----END PGP SIGNATURE-----
Merge tag 'docs-5.16-3' of git://git.lwn.net/linux
Pull documentation fixes from Jonathan Corbet:
"A few important documentation fixes, including breakage that comes
with v1.0 of the ReadTheDocs theme"
* tag 'docs-5.16-3' of git://git.lwn.net/linux:
Documentation: Add minimum pahole version
Documentation/process: fix self reference
docs: admin-guide/blockdev: Remove digraph of node-states
docs: conf.py: fix support for Readthedocs v 1.0.0
Provide default defines for the topology_book_[id|cpumask] and
topology_drawer_[id|cpumask] macros just like for each other topology
level.
This way all topology levels are handled in a similar way. Still the
the book and drawer levels are only used on s390, and also the sysfs
attributes are only created on s390. However other architectures may
opt in if wanted.
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Link: https://lore.kernel.org/r/20211129130309.3256168-4-hca@linux.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The cluster_id and cluster_cpus topology sysfs attributes have been
added with commit c5e22feffd ("topology: Represent clusters of CPUs
within a die").
They are currently only used for x86, arm64, and riscv (via generic
arch topology), however they are still present with bogus default
values for all other architectures. Instead of enforcing such new
sysfs attributes to all architectures, make them only optional visible
if an architecture opts in by defining both the topology_cluster_id
and topology_cluster_cpumask attributes.
This is similar to what was done when the book and drawer topology
levels were introduced: avoid useless and therefore confusing sysfs
attributes for architectures which cannot make use of them.
This should not break any existing applications, since this is a
new interface introduced with the v5.16 merge window.
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Link: https://lore.kernel.org/r/20211129130309.3256168-3-hca@linux.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The die_id and die_cpus topology sysfs attributes have been added with
commit 0e344d8c70 ("cpu/topology: Export die_id") and commit
2e4c54dac7 ("topology: Create core_cpus and die_cpus sysfs attributes").
While they are currently only used and useful for x86 they are still
present with bogus default values for all architectures. Instead of
enforcing such new sysfs attributes to all architectures, make them
only optional visible if an architecture opts in by defining both the
topology_die_id and topology_die_cpumask attributes.
This is similar to what was done when the book and drawer topology
levels were introduced: avoid useless and therefore confusing sysfs
attributes for architectures which cannot make use of them.
This should not break any existing applications, since this is a
rather new interface and applications should be able to handle also
older kernel versions without such attributes - besides that they
contain only useful information for x86.
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Link: https://lore.kernel.org/r/20211129130309.3256168-2-hca@linux.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
All of the uses of CONFIG_RCU_FAST_NO_HZ=y that I have seen involve
systems with RCU callbacks offloaded. In this situation, all that this
Kconfig option does is slow down idle entry/exit with an additional
allways-taken early exit. If this is the only use case, then this
Kconfig option nothing but an attractive nuisance that needs to go away.
This commit therefore removes the RCU_FAST_NO_HZ Kconfig option.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This document advises building with both CONFIG_NO_HZ=y and
CONFIG_RCU_FAST_NO_HZ=y. However, CONFIG_NO_HZ=y offloads callbacks from
all nohz_full CPUs, and CPUs with offloaded callbacks do not benefit from
CONFIG_RCU_FAST_NO_HZ=y. Quite the opposite: CONFIG_RCU_FAST_NO_HZ=y
simply adds a bit of idle entry/exit overhead.
This commit therefore changes that advice to only CONFIG_NO_HZ=y.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
With the previous patch, there is an extra watchdog read in each retry.
Now the total number of clocksource reads is increased to 4 per iteration.
In order to avoid increasing the clock skew check overhead, the default
maximum number of retries is reduced from 3 to 2 to maintain the same 12
clocksource reads in the worst case.
Suggested-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
While node-states-8.dot has two digraphs, the dot(1) command can
not properly handle multiple graphs in a DOT file and the
kernel-doc page at
https://www.kernel.org/doc/html/latest/admin-guide/blockdev/drbd/figures.html
fails to render the graphs.
It turned out that the digraph of node_states can be removed.
Quote from Joel's reflection:
On reflection, the digraph node_states can be removed entirely.
It is too basic to contain any useful information. In addition
it references "ioctl_set_state". The ioctl configuration
interface for DRBD has long been removed. In fact, it was never
in the upstream version of DRBD.
Remove node_states and rename the DOT file peer_states-8.dot.
Suggested-by: Joel Colledge <joel.colledge@linbit.com>
Acked-by: Joel Colledge <joel.colledge@linbit.com>
Signed-off-by: Akira Yokosawa <akiyks@gmail.com>
Cc: Philipp Reisner <philipp.reisner@linbit.com>
Cc: Lars Ellenberg <lars.ellenberg@linbit.com>
Link: https://lore.kernel.org/r/7df04f45-8746-e666-1a9d-a998f1ab1f91@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Enable the memtest functionality and rearrange some code to prevent it
from clobbering the initrd.
The code to implement CONFIG_BLK_DEV_INITRD was conditional on
!defined(CONFIG_SUN3). For simplicity, remove that test on the basis
that m68k_ramdisk.size == 0 on Sun 3. The SLIME source code at
http://sammy.net/sun3/ftp/pub/m68k/sun3/slime/slime-2.0.tar.gz
indicates that no BI_RAMDISK entry is ever passed to the kernel due
to #ifdef 0 around the relevant code.
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Sam Creasey <sammy@sammy.net>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Finn Thain <fthain@linux-m68k.org>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Link: https://lore.kernel.org/r/8170fe1d1c62426d82275d36ba409ecc18754292.1637274578.git.fthain@linux-m68k.org
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
We've got a bug report about the non-working keyboard on ASUS ZenBook
UX425UA. It seems that the PS/2 device isn't ready immediately at
boot but takes some seconds to get ready. Until now, the only
workaround is to defer the probe, but it's available only when the
driver is a module. However, many distros, including openSUSE as in
the original report, build the PS/2 input drivers into kernel, hence
it won't work easily.
This patch adds the support for the deferred probe for i8042 stuff as
a workaround of the problem above. When the deferred probe mode is
enabled and the device couldn't be probed, it'll be repeated with the
standard deferred probe mechanism.
The deferred probe mode is enabled either via the new option
i8042.probe_defer or via the quirk table entry. As of this patch, the
quirk table contains only ASUS ZenBook UX425UA.
The deferred probe part is based on Fabio's initial work.
BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1190256
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Tested-by: Samuel Čavoj <samuel@cavoj.net>
Link: https://lore.kernel.org/r/20211117063757.11380-1-tiwai@suse.de
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The nomodeset kernel command line parameter is not documented. Its name
is quite vague and is not intuitive what's the behaviour when it is set.
Document in kernel-parameters.txt what actually happens when nomodeset
is used. That way, users could know if they want to enable this option.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211112133230.1595307-6-javierm@redhat.com
StoreEOI is activated by default on platforms supporting the feature
(POWER10) and will be used as soon as firmware advertises its
availability. The kernel parameter provides a way to deactivate its
use. It can be still be reactivated through debugfs.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211105102636.1016378-10-clg@kaod.org
It can be useful in simulators (with very constrained environments)
to allow some PMCs to run from boot so they can be sampled directly
by a test harness, rather than having to run perf.
A previous change freezes counters at boot by default, so provide
a boot time option to un-freeze (plus a bit more flexibility).
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211123095231.1036501-13-npiggin@gmail.com
Various build- and bug-fixes as well as 1 hardware-id addition.
The following is an automated git shortlog grouped by driver:
amd-pmc:
- Make CONFIG_AMD_PMC depend on RTC_CLASS
dell-wmi-descriptor:
- disable by default
hp_accel:
- Fix an error handling path in 'lis3lv02d_probe()'
platform/mellanox:
- mlxreg-lc: fix error code in mlxreg_lc_create_static_devices()
samsung-laptop:
- Fix typo in a comment
think-lmi:
- Abort probe on analyze failure
thinkpad_acpi:
- fix documentation for adaptive keyboard
- Fix WWAN device disabled issue after S3 deep
- Add support for dual fan control
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmGWHnoUHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9wwfwf9Hrv9vdzWDnwdeGh5BiWqeTq37/YT
FqYB9HzKIaZKe5MYvibZD7sQQa86Up9/fTNF+TlIj+uMjgvzLkAXWR3841aGM7Mh
z4OhCCx9aJLtpBUWyzsXRmO1ArLfkUIbHMBWMpcrPbeNGIwZMRfuq3ms5wPXWgfu
QzNaDJEBHQlM4aNScb1K3a2HCXJIWcFw78/A8oq7LD0iKxd11ZmOuvKR9MIeUq5s
hH/UEZqeJ8MCG+lNGShYvSCYAG1UIV6qF35XLR8VSlY/FZ48AcT6bgMyrhwJPrCW
yJF6GBd8YnaAJqWWwqeaQMhIi8OKIMthFBbRd4epWAYmgP00w0ROJ+4SLQ==
=siB2
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
"Various build- and bug-fixes as well as one hardware-id addition"
* tag 'platform-drivers-x86-v5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: thinkpad_acpi: fix documentation for adaptive keyboard
platform/x86: thinkpad_acpi: Fix WWAN device disabled issue after S3 deep
platform/x86: thinkpad_acpi: Add support for dual fan control
platform/x86: think-lmi: Abort probe on analyze failure
platform/x86: dell-wmi-descriptor: disable by default
platform/x86: samsung-laptop: Fix typo in a comment
platform/x86: hp_accel: Fix an error handling path in 'lis3lv02d_probe()'
platform/x86: amd-pmc: Make CONFIG_AMD_PMC depend on RTC_CLASS
platform/mellanox: mlxreg-lc: fix error code in mlxreg_lc_create_static_devices()
The file name: accounting/delay-accounting.rst
should be, instead: Documentation/accounting/delay-accounting.rst.
Also, there's no need to use doc:`foo`, as automarkup.py will
automatically handle plain text mentions to Documentation/
files.
So, update its cross-reference accordingly.
Fixes: fcb5017045 ("delayacct: Document task_delayacct sysctl")
Fixes: c3123552aa ("docs: accounting: convert to ReST")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The different values were offset by 1. 0 is for "home mode", 1 for
"web-browser mode", etc. Moreover, the URL to the laptop's user guide
did not work anymore.
Signed-off-by: Vincent Bernat <vincent@bernat.ch>
Link: https://lore.kernel.org/r/20211109195209.176905-1-vincent@bernat.ch
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
support for a filehandle format deprecated 20 years ago, and further
xdr-related cleanup from Chuck.
-----BEGIN PGP SIGNATURE-----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=yKBl
-----END PGP SIGNATURE-----
Merge tag 'nfsd-5.16' of git://linux-nfs.org/~bfields/linux
Pull nfsd updates from Bruce Fields:
"A slow cycle for nfsd: mainly cleanup, including Neil's patch dropping
support for a filehandle format deprecated 20 years ago, and further
xdr-related cleanup from Chuck"
* tag 'nfsd-5.16' of git://linux-nfs.org/~bfields/linux: (26 commits)
nfsd4: remove obselete comment
nfsd: document server-to-server-copy parameters
NFSD:fix boolreturn.cocci warning
nfsd: update create verifier comment
SUNRPC: Change return value type of .pc_encode
SUNRPC: Replace the "__be32 *p" parameter to .pc_encode
NFSD: Save location of NFSv4 COMPOUND status
SUNRPC: Change return value type of .pc_decode
SUNRPC: Replace the "__be32 *p" parameter to .pc_decode
SUNRPC: De-duplicate .pc_release() call sites
SUNRPC: Simplify the SVC dispatch code path
SUNRPC: Capture value of xdr_buf::page_base
SUNRPC: Add trace event when alloc_pages_bulk() makes no progress
svcrdma: Split svcrmda_wc_{read,write} tracepoints
svcrdma: Split the svcrdma_wc_send() tracepoint
svcrdma: Split the svcrdma_wc_receive() tracepoint
NFSD: Have legacy NFSD WRITE decoders use xdr_stream_subsegment()
SUNRPC: xdr_stream_subsegment() must handle non-zero page_bases
NFSD: Initialize pointer ni with NULL and not plain integer 0
NFSD: simplify struct nfsfh
...
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCYYvEbgAKCRCRxhvAZXjc
og17AQDj+gsxk2lT4GsRo+WrI9qegGSvYHaxbOoqqSL6rHrrsQD+IU92dwVfuUXE
oP+De6/TBmsdygnlECxITp8p4ByhGAM=
=wi2X
-----END PGP SIGNATURE-----
Merge tag 'kernel.sys.v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull prctl updates from Christian Brauner:
"This contains the missing prctl uapi pieces for PR_SCHED_CORE.
In order to activate core scheduling the caller is expected to specify
the scope of the new core scheduling domain.
For example, passing 2 in the 4th argument of
prctl(PR_SCHED_CORE, PR_SCHED_CORE_CREATE, <pid>, 2, 0);
would indicate that the new core scheduling domain encompasses all
tasks in the process group of <pid>. Specifying 0 would only create a
core scheduling domain for the thread identified by <pid> and 2 would
encompass the whole thread-group of <pid>.
Note, the values 0, 1, and 2 correspond to PIDTYPE_PID, PIDTYPE_TGID,
and PIDTYPE_PGID. A first version tried to expose those values
directly to which I objected because:
- PIDTYPE_* is an enum that is kernel internal which we should not
expose to userspace directly.
- PIDTYPE_* indicates what a given struct pid is used for it doesn't
express a scope.
But what the 4th argument of PR_SCHED_CORE prctl() expresses is the
scope of the operation, i.e. the scope of the core scheduling domain
at creation time. So Eugene's patch now simply introduces three new
defines PR_SCHED_CORE_SCOPE_THREAD, PR_SCHED_CORE_SCOPE_THREAD_GROUP,
and PR_SCHED_CORE_SCOPE_PROCESS_GROUP. They simply express what
happens.
This has been on the mailing list for quite a while with all relevant
scheduler folks Cced. I announced multiple times that I'd pick this up
if I don't see or her anyone else doing it. None of this touches
proper scheduler code but only concerns uapi so I think this is fine.
With core scheduling being quite common now for vm managers (e.g.
moving individual vcpu threads into their own core scheduling domain)
and container managers (e.g. moving the init process into its own core
scheduling domain and letting all created children inherit it) having
to rely on raw numbers passed as the 4th argument in prctl() is a bit
annoying and everyone is starting to come up with their own defines"
* tag 'kernel.sys.v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
uapi/linux/prctl: provide macro definitions for the PR_SCHED_CORE type argument
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCYYp8HgAKCRCAXGG7T9hj
vmuVAP4whjbyIi4IxYEOnE6On0aD0AgUMiFa7QXrDZi6NXUQIwEAnggLFe+rEG5C
Fwi/cEXSHrRgveqrgD4GYEr6l0GTxwM=
=/fMa
-----END PGP SIGNATURE-----
Merge tag 'for-linus-5.16b-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen updates from Juergen Gross:
- a series to speed up the boot of Xen PV guests
- some cleanups in Xen related code
- replacement of license texts with the appropriate SPDX headers and
fixing of wrong SPDX headers in Xen header files
- a small series making paravirtualized interrupt masking much simpler
and at the same time removing complaints of objtool
- a fix for Xen ballooning hogging workqueues for too long
- enablement of the Xen pciback driver for Arm
- some further small fixes/enhancements
* tag 'for-linus-5.16b-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: (22 commits)
xen/balloon: fix unused-variable warning
xen/balloon: rename alloc/free_xenballooned_pages
xen/balloon: add late_initcall_sync() for initial ballooning done
x86/xen: remove 32-bit awareness from startup_xen
xen: remove highmem remnants
xen: allow pv-only hypercalls only with CONFIG_XEN_PV
x86/xen: remove 32-bit pv leftovers
xen-pciback: allow compiling on other archs than x86
x86/xen: switch initial pvops IRQ functions to dummy ones
x86/xen: remove xen_have_vcpu_info_placement flag
x86/pvh: add prototype for xen_pvh_init()
xen: Fix implicit type conversion
xen: fix wrong SPDX headers of Xen related headers
xen/pvcalls-back: Remove redundant 'flush_workqueue()' calls
x86/xen: Remove redundant irq_enter/exit() invocations
xen-pciback: Fix return in pm_ctrl_init()
xen/x86: restrict PV Dom0 identity mapping
xen/x86: there's no highmem anymore in PV mode
xen/x86: adjust handling of the L3 user vsyscall special page table
xen/x86: adjust xen_set_fixmap()
...
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEq1nRK9aeMoq1VSgcnJ2qBz9kQNkFAmGFN6IACgkQnJ2qBz9k
QNkfYwgA1w5x/CsN2IMZdx6FTuZFgbOvQpBMTry8iuOPKK3UyIkZaUirTVLKR0cm
k3QbBR9/vTfQTNg5weuFJcbPZZaCXKEvlPGvDh+pumMbfTkMwL3FADweNBoZ3PzO
EiRrV45AbRgSMOzsfURzCz1T53Gd8fYM3pXxmNXG+bnE7+Ea+heKgor8/jFc4U3w
kAKZTfyCiheo7KxVhFGnkGI3ZhIbnbZne4seY/CE4qtv7/bmBE7bhGpmv8LT5FUn
h/JBDLjFU0fzJpplXE6n/VHXeGaUwb8adnYpzojWQ0lLYFrMIZFQ0KkDK6PNwmJF
MKWGqRxDkf54oeWuEAJ9t4/OorqM9A==
=ltE7
-----END PGP SIGNATURE-----
Merge tag 'fsnotify_for_v5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull fsnotify updates from Jan Kara:
"Support for reporting filesystem errors through fanotify so that
system health monitoring daemons can watch for these and act instead
of scraping system logs"
* tag 'fsnotify_for_v5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: (34 commits)
samples: remove duplicate include in fs-monitor.c
samples: Fix warning in fsnotify sample
docs: Fix formatting of literal sections in fanotify docs
samples: Make fs-monitor depend on libc and headers
docs: Document the FAN_FS_ERROR event
samples: Add fs error monitoring example
ext4: Send notifications on error
fanotify: Allow users to request FAN_FS_ERROR events
fanotify: Emit generic error info for error event
fanotify: Report fid info for file related file system errors
fanotify: WARN_ON against too large file handles
fanotify: Add helpers to decide whether to report FID/DFID
fanotify: Wrap object_fh inline space in a creator macro
fanotify: Support merging of error events
fanotify: Support enqueueing of error events
fanotify: Pre-allocate pool of error events
fanotify: Reserve UAPI bits for FAN_FS_ERROR
fsnotify: Support FS_ERROR event type
fanotify: Require fid_mode for any non-fd event
fanotify: Encode empty file handle when no inode is provided
...
- Add support for ftrace with direct call and ftrace direct call samples.
- Add support for kernel command lines longer than current 896 bytes and
make its length configurable.
- Add support for BEAR enhancement facility to improve last breaking
event instruction tracking.
- Add kprobes sanity checks and testcases to prevent kprobe in the mid
of an instruction.
- Allow concurrent access to /dev/hwc for the CPUMF users.
- Various ftrace / jump label improvements.
- Convert unwinder tests to KUnit.
- Add s390_iommu_aperture kernel parameter to tweak the limits on
concurrently usable DMA mappings.
- Add ap.useirq AP module option which can be used to disable interrupt
use.
- Add add_disk() error handling support to block device drivers.
- Drop arch specific and use generic implementation of strlcpy and strrchr.
- Several __pa/__va usages fixes.
- Various cio, crypto, pci, kernel doc and other small fixes and
improvements all over the code.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE3QHqV+H2a8xAv27vjYWKoQLXFBgFAmGFW6EACgkQjYWKoQLX
FBg20Qf/UbohgnKnE6vxbbH3sNTlI2dk3Cw4z3IobcsZgqXAu6AFLgLQGLk/X07F
DIyUdrgSgCzLIEKLqrLrFXIOMIK44zAGaurIltNt7IrnWWlA+/YVD+YeL2gHwccq
wT7KXRcrVMZQ1z18djJQ45DpPUC8ErBdL6+P+ftHck90YGFZsfMA5S7jf8X1h08U
IlqdPTmY8t4unKHWVpHbxx9b+xrUuV6KTEXADsllpMV2jQoTLdDECd3vmefYR6tR
3lssgop1m/RzH5OCqvia5Sy2D5fOQObNWDMakwOkVMxOD43lmGCTHstzS2Uo2OFE
QcY79lfZ5NrzKnenUdE5Fd0XJ9kSwQ==
=k0Ab
-----END PGP SIGNATURE-----
Merge tag 's390-5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Vasily Gorbik:
- Add support for ftrace with direct call and ftrace direct call
samples.
- Add support for kernel command lines longer than current 896 bytes
and make its length configurable.
- Add support for BEAR enhancement facility to improve last breaking
event instruction tracking.
- Add kprobes sanity checks and testcases to prevent kprobe in the mid
of an instruction.
- Allow concurrent access to /dev/hwc for the CPUMF users.
- Various ftrace / jump label improvements.
- Convert unwinder tests to KUnit.
- Add s390_iommu_aperture kernel parameter to tweak the limits on
concurrently usable DMA mappings.
- Add ap.useirq AP module option which can be used to disable interrupt
use.
- Add add_disk() error handling support to block device drivers.
- Drop arch specific and use generic implementation of strlcpy and
strrchr.
- Several __pa/__va usages fixes.
- Various cio, crypto, pci, kernel doc and other small fixes and
improvements all over the code.
[ Merge fixup as per https://lore.kernel.org/all/YXAqZ%2FEszRisunQw@osiris/ ]
* tag 's390-5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (63 commits)
s390: make command line configurable
s390: support command lines longer than 896 bytes
s390/kexec_file: move kernel image size check
s390/pci: add s390_iommu_aperture kernel parameter
s390/spinlock: remove incorrect kernel doc indicator
s390/string: use generic strlcpy
s390/string: use generic strrchr
s390/ap: function rework based on compiler warning
s390/cio: make ccw_device_dma_* more robust
s390/vfio-ap: s390/crypto: fix all kernel-doc warnings
s390/hmcdrv: fix kernel doc comments
s390/ap: new module option ap.useirq
s390/cpumf: Allow multiple processes to access /dev/hwc
s390/bitops: return true/false (not 1/0) from bool functions
s390: add support for BEAR enhancement facility
s390: introduce nospec_uses_trampoline()
s390: rename last_break to pgm_last_break
s390/ptrace: add last_break member to pt_regs
s390/sclp: sort out physical vs virtual pointers usage
s390/setup: convert start and end initrd pointers to virtual
...
Merge misc updates from Andrew Morton:
"257 patches.
Subsystems affected by this patch series: scripts, ocfs2, vfs, and
mm (slab-generic, slab, slub, kconfig, dax, kasan, debug, pagecache,
gup, swap, memcg, pagemap, mprotect, mremap, iomap, tracing, vmalloc,
pagealloc, memory-failure, hugetlb, userfaultfd, vmscan, tools,
memblock, oom-kill, hugetlbfs, migration, thp, readahead, nommu, ksm,
vmstat, madvise, memory-hotplug, rmap, zsmalloc, highmem, zram,
cleanups, kfence, and damon)"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (257 commits)
mm/damon: remove return value from before_terminate callback
mm/damon: fix a few spelling mistakes in comments and a pr_debug message
mm/damon: simplify stop mechanism
Docs/admin-guide/mm/pagemap: wordsmith page flags descriptions
Docs/admin-guide/mm/damon/start: simplify the content
Docs/admin-guide/mm/damon/start: fix a wrong link
Docs/admin-guide/mm/damon/start: fix wrong example commands
mm/damon/dbgfs: add adaptive_targets list check before enable monitor_on
mm/damon: remove unnecessary variable initialization
Documentation/admin-guide/mm/damon: add a document for DAMON_RECLAIM
mm/damon: introduce DAMON-based Reclamation (DAMON_RECLAIM)
selftests/damon: support watermarks
mm/damon/dbgfs: support watermarks
mm/damon/schemes: activate schemes based on a watermarks mechanism
tools/selftests/damon: update for regions prioritization of schemes
mm/damon/dbgfs: support prioritization weights
mm/damon/vaddr,paddr: support pageout prioritization
mm/damon/schemes: prioritize regions within the quotas
mm/damon/selftests: support schemes quotas
mm/damon/dbgfs: support quotas of schemes
...
Some descriptions of page flags in 'pagemap.rst' are written in
assumption of none-rst, which respects every new line, as below:
7 - SLAB
page is managed by the SLAB/SLOB/SLUB/SLQB kernel memory allocator
When compound page is used, SLUB/SLQB will only set this flag on the head
Because rst ignores the new line between the first sentence and second
sentence, resulting html looks a little bit weird, as below.
7 - SLAB
page is managed by the SLAB/SLOB/SLUB/SLQB kernel memory allocator When
^
compound page is used, SLUB/SLQB will only set this flag on the head
page; SLOB will not flag it at all.
This change makes it more natural and consistent with other parts in the
rendered version.
Link: https://lkml.kernel.org/r/20211022090311.3856-5-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Information in 'TL; DR' section of 'Getting Started' is duplicated in
other parts of the doc. It is also asking readers to visit the access
pattern visualizations gallery web site to show the results of example
visualization commands, while the users of the commands can use terminal
output.
To make the doc simple, this removes the duplicated 'TL; DR' section and
replaces the visualization example commands with versions using terminal
outputs.
Link: https://lkml.kernel.org/r/20211022090311.3856-4-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The 'Getting Started' of DAMON is providing a link to DAMON's user
interface document while saying about its user space tool's detailed
usages. This fixes the link.
Link: https://lkml.kernel.org/r/20211022090311.3856-3-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "Fix trivial nits in Documentation/admin-guide/mm".
This patchset fixes trivial nits in admin guide documents for DAMON and
pagemap.
This patch (of 4):
Some of the example commands in DAMON getting started guide are
outdated, missing sudo, or just wrong. This fixes those.
Link: https://lkml.kernel.org/r/20211022090311.3856-2-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This adds an admin-guide document for DAMON-based Reclamation.
Link: https://lkml.kernel.org/r/20211019150731.16699-16-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Amit Shah <amit@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: David Woodhouse <dwmw@amazon.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Leonard Foerster <foersleo@amazon.de>
Cc: Marco Elver <elver@google.com>
Cc: Markus Boehme <markubo@amazon.de>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This updates the DAMON documents for the physical memory address space
monitoring support.
Link: https://lkml.kernel.org/r/20211012205711.29216-8-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Amit Shah <amit@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rienjes <rientjes@google.com>
Cc: David Woodhouse <dwmw@amazon.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Leonard Foerster <foersleo@amazon.de>
Cc: Marco Elver <elver@google.com>
Cc: Markus Boehme <markubo@amazon.de>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This adds description of the 'init_regions' feature in the DAMON usage
document.
Link: https://lkml.kernel.org/r/20211012205711.29216-4-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Amit Shah <amit@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rienjes <rientjes@google.com>
Cc: David Woodhouse <dwmw@amazon.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Leonard Foerster <foersleo@amazon.de>
Cc: Marco Elver <elver@google.com>
Cc: Markus Boehme <markubo@amazon.de>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This adds the description of DAMON-based operation schemes in the DAMON
documents.
Link: https://lkml.kernel.org/r/20211001125604.29660-8-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Amit Shah <amit@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rienjes <rientjes@google.com>
Cc: David Woodhouse <dwmw@amazon.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Leonard Foerster <foersleo@amazon.de>
Cc: Marco Elver <elver@google.com>
Cc: Markus Boehme <markubo@amazon.de>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Most memory management user guide documents are in 'admin-guide/mm/',
but two of those are in 'vm/'. This moves the two docs into
'admin-guide/mm' for easier documents finding.
Link: https://lkml.kernel.org/r/20210917123958.3819-2-sj@kernel.org
Signed-off-by: SeongJae Park <sjpark@amazon.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This change introduces an aged idle interface to the existing idle sysfs
file for zram.
When CONFIG_ZRAM_MEMORY_TRACKING is enabled the idle file now also
accepts an integer argument. This integer is the age (in seconds) of
pages to mark as idle. The idle file still supports 'all' as it always
has. This new approach allows for much more control over which pages
get marked as idle.
[bgeffon@google.com: use IS_ENABLED and cleanup comment]
Link: https://lkml.kernel.org/r/20210924161128.1508015-1-bgeffon@google.com
[bgeffon@google.com: Sergey's cleanup suggestions]
Link: https://lkml.kernel.org/r/20210929143056.13067-1-bgeffon@google.com
Link: https://lkml.kernel.org/r/20210923130115.1344361-1-bgeffon@google.com
Signed-off-by: Brian Geffon <bgeffon@google.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Suleiman Souhlal <suleiman@google.com>
Cc: Jesse Barnes <jsbarnes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit e83a437faa ("mm/memory_hotplug: introduce "auto-movable" online
policy") introduced a new memory online policy to automatically select a
zone for memory blocks to be onlined. It added a way to set the active
online policy and tunables for the auto-movable online policy.
Follow-up commits tweaked the "auto-movable" policy to also consider
memory device details when selecting zones for memory blocks to be
onlined.
Let's document the new toggles and how the two online policies we have
work.
[david@redhat.com: updates]
Link: https://lkml.kernel.org/r/20211011082058.6076-4-david@redhat.com
Link: https://lkml.kernel.org/r/20210930144117.23641-4-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We accidentially added a superfluous "s".
Link: https://lkml.kernel.org/r/20210930144117.23641-3-david@redhat.com
Fixes: ac3332c447 ("memory-hotplug.rst: complete admin-guide overhaul")
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "memory-hotplug.rst: document the "auto-movable" online
policy".
Now that the memory-hotplug.rst overhaul is upstream, proper
documentation for the "auto-movable" online policy, documenting all new
toggles and options. Along, two fixes for the original overhaul.
This patch (of 3):
We really want to refer to the "movable_node" kernel command line
parameter here.
Link: https://lkml.kernel.org/r/20210930144117.23641-2-david@redhat.com
Fixes: ac3332c447 ("memory-hotplug.rst: complete admin-guide overhaul")
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We can specify the number of hugepages to allocate at boot. But the
hugepages is balanced in all nodes at present. In some scenarios, we
only need hugepages in one node. For example: DPDK needs hugepages
which are in the same node as NIC.
If DPDK needs four hugepages of 1G size in node1 and system has 16 numa
nodes we must reserve 64 hugepages on the kernel cmdline. But only four
hugepages are used. The others should be free after boot. If the
system memory is low(for example: 64G), it will be an impossible task.
So extend the hugepages parameter to support specifying hugepages on a
specific node. For example add following parameter:
hugepagesz=1G hugepages=0:1,1:3
It will allocate 1 hugepage in node0 and 3 hugepages in node1.
Link: https://lkml.kernel.org/r/20211005054729.86457-1-yaozhenguo1@gmail.com
Signed-off-by: Zhenguo Yao <yaozhenguo1@gmail.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Zhenguo Yao <yaozhenguo1@gmail.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Now the size of CMA area for gigantic hugepages runtime allocation is
balanced for all online nodes, but we also want to specify the size of
CMA per-node, or only one node in some cases, which are similar with
patch [1].
For example, on some multi-nodes systems, each node's memory can be
different, allocating the same size of CMA for each node is not suitable
for the low-memory nodes. Meanwhile some workloads like DPDK mentioned
by Zhenguo in patch [1] only need hugepages in one node.
On the other hand, we have some machines with multiple types of memory,
like DRAM and PMEM (persistent memory). On this system, we may want to
specify all the hugepages only on DRAM node, or specify the proportion
of DRAM node and PMEM node, to tuning the performance of the workloads.
Thus this patch adds node format for 'hugetlb_cma' parameter to support
specifying the size of CMA per-node. An example is as follows:
hugetlb_cma=0:5G,2:5G
which means allocating 5G size of CMA area on node 0 and node 2
respectively. And the users should use the node specific sysfs file to
allocate the gigantic hugepages if specified the CMA size on that node.
Link: https://lkml.kernel.org/r/20211005054729.86457-1-yaozhenguo1@gmail.com [1]
Link: https://lkml.kernel.org/r/bb790775ca60bb8f4b26956bb3f6988f74e075c7.1634261144.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "hugetlb: add demote/split page functionality", v4.
The concurrent use of multiple hugetlb page sizes on a single system is
becoming more common. One of the reasons is better TLB support for
gigantic page sizes on x86 hardware. In addition, hugetlb pages are
being used to back VMs in hosting environments.
When using hugetlb pages to back VMs, it is often desirable to
preallocate hugetlb pools. This avoids the delay and uncertainty of
allocating hugetlb pages at VM startup. In addition, preallocating huge
pages minimizes the issue of memory fragmentation that increases the
longer the system is up and running.
In such environments, a combination of larger and smaller hugetlb pages
are preallocated in anticipation of backing VMs of various sizes. Over
time, the preallocated pool of smaller hugetlb pages may become depleted
while larger hugetlb pages still remain. In such situations, it is
desirable to convert larger hugetlb pages to smaller hugetlb pages.
Converting larger to smaller hugetlb pages can be accomplished today by
first freeing the larger page to the buddy allocator and then allocating
the smaller pages. For example, to convert 50 GB pages on x86:
gb_pages=`cat .../hugepages-1048576kB/nr_hugepages`
m2_pages=`cat .../hugepages-2048kB/nr_hugepages`
echo $(($gb_pages - 50)) > .../hugepages-1048576kB/nr_hugepages
echo $(($m2_pages + 25600)) > .../hugepages-2048kB/nr_hugepages
On an idle system this operation is fairly reliable and results are as
expected. The number of 2MB pages is increased as expected and the time
of the operation is a second or two.
However, when there is activity on the system the following issues
arise:
1) This process can take quite some time, especially if allocation of
the smaller pages is not immediate and requires migration/compaction.
2) There is no guarantee that the total size of smaller pages allocated
will match the size of the larger page which was freed. This is
because the area freed by the larger page could quickly be
fragmented.
In a test environment with a load that continually fills the page cache
with clean pages, results such as the following can be observed:
Unexpected number of 2MB pages allocated: Expected 25600, have 19944
real 0m42.092s
user 0m0.008s
sys 0m41.467s
To address these issues, introduce the concept of hugetlb page demotion.
Demotion provides a means of 'in place' splitting of a hugetlb page to
pages of a smaller size. This avoids freeing pages to buddy and then
trying to allocate from buddy.
Page demotion is controlled via sysfs files that reside in the per-hugetlb
page size and per node directories.
- demote_size
Target page size for demotion, a smaller huge page size. File
can be written to chose a smaller huge page size if multiple are
available.
- demote
Writable number of hugetlb pages to be demoted
To demote 50 GB huge pages, one would:
cat .../hugepages-1048576kB/free_hugepages /* optional, verify free pages */
cat .../hugepages-1048576kB/demote_size /* optional, verify target size */
echo 50 > .../hugepages-1048576kB/demote
Only hugetlb pages which are free at the time of the request can be
demoted. Demotion does not add to the complexity of surplus pages and
honors reserved huge pages. Therefore, when a value is written to the
sysfs demote file, that value is only the maximum number of pages which
will be demoted. It is possible fewer will actually be demoted. The
recently introduced per-hstate mutex is used to synchronize demote
operations with other operations that modify hugetlb pools.
Real world use cases
--------------------
The above scenario describes a real world use case where hugetlb pages
are used to back VMs on x86. Both issues of long allocation times and
not necessarily getting the expected number of smaller huge pages after
a free and allocate cycle have been experienced. The occurrence of
these issues is dependent on other activity within the host and can not
be predicted.
This patch (of 5):
Two new sysfs files are added to demote hugtlb pages. These files are
both per-hugetlb page size and per node. Files are:
demote_size - The size in Kb that pages are demoted to. (read-write)
demote - The number of huge pages to demote. (write-only)
By default, demote_size is the next smallest huge page size. Valid huge
page sizes less than huge page size may be written to this file. When
huge pages are demoted, they are demoted to this size.
Writing a value to demote will result in an attempt to demote that
number of hugetlb pages to an appropriate number of demote_size pages.
NOTE: Demote interfaces are only provided for huge page sizes if there
is a smaller target demote huge page size. For example, on x86 1GB huge
pages will have demote interfaces. 2MB huge pages will not have demote
interfaces.
This patch does not provide full demote functionality. It only provides
the sysfs interfaces.
It also provides documentation for the new interfaces.
[mike.kravetz@oracle.com: n_mask initialization does not need to be protected by the mutex]
Link: https://lkml.kernel.org/r/0530e4ef-2492-5186-f919-5db68edea654@oracle.com
Link: https://lkml.kernel.org/r/20211007181918.136982-2-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: David Rientjes <rientjes@google.com>
Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.ibm.com>
Cc: Nghia Le <nghialm78@gmail.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch follows the discussions on previous documentation patch
threads [1][2]. It presents the exception case of shared memory
management from the pagemap's point of view. It briefly describes what
is missing, why it is missing and alternatives to the pagemap for page
info retrieval in user space.
In short, the kernel does not keep track of PTEs for swapped out shared
pages within the processes that references them. Thus, the
proc/pid/pagemap tool cannot print the swap destination of the shared
memory pages, instead setting the pagemap entry to zero for both
non-allocated and swapped out pages. This can create confusion for
users who need information on swapped out pages.
The reasons why maintaining the PTEs of all swapped out shared pages
among all processes while maintaining similar performance is not a
trivial task, or a desirable change, have been discussed extensively
[1][3][4][5]. There are also arguments for why this arguably missing
information should eventually be exposed to the user in either a future
pagemap patch, or by an alternative tool.
[1]: https://marc.info/?m=162878395426774
[2]: https://lore.kernel.org/lkml/20210920164931.175411-1-tiberiu.georgescu@nutanix.com/
[3]: https://lore.kernel.org/lkml/20210730160826.63785-1-tiberiu.georgescu@nutanix.com/
[4]: https://lore.kernel.org/lkml/20210807032521.7591-1-peterx@redhat.com/
[5]: https://lore.kernel.org/lkml/20210715201651.212134-1-peterx@redhat.com/
Mention the current missing information in the pagemap and alternatives
on how to retrieve it, in case someone stumbles upon unexpected
behaviour.
Link: https://lkml.kernel.org/r/20210923064618.157046-1-tiberiu.georgescu@nutanix.com
Link: https://lkml.kernel.org/r/20210923064618.157046-2-tiberiu.georgescu@nutanix.com
Signed-off-by: Tiberiu A Georgescu <tiberiu.georgescu@nutanix.com>
Reviewed-by: Ivan Teterevkov <ivan.teterevkov@nutanix.com>
Reviewed-by: Florian Schmidt <florian.schmidt@nutanix.com>
Reviewed-by: Carl Waldspurger <carl.waldspurger@nutanix.com>
Reviewed-by: Jonathan Davies <jonathan.davies@nutanix.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The deprecation process of kmem.limit_in_bytes started with the commit
0158115f70 ("memcg, kmem: deprecate kmem.limit_in_bytes") which also
explains in detail the motivation behind the deprecation. To summarize,
it is the unexpected behavior on hitting the kmem limit. This patch
moves the deprecation process to the next stage by disallowing to set
the kmem limit. In future we might just remove the kmem.limit_in_bytes
file completely.
[akpm@linux-foundation.org: s/ENOTSUPP/EOPNOTSUPP/]
[arnd@arndb.de: mark cancel_charge() inline]
Link: https://lkml.kernel.org/r/20211022070542.679839-1-arnd@kernel.org
Link: https://lkml.kernel.org/r/20211019153408.2916808-1-shakeelb@google.com
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Roman Gushchin <guro@fb.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Vasily Averin <vvs@virtuozzo.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When running as PVH or HVM guest with actual memory < max memory the
hypervisor is using "populate on demand" in order to allow the guest
to balloon down from its maximum memory size. For this to work
correctly the guest must not touch more memory pages than its target
memory size as otherwise the PoD cache will be exhausted and the guest
is crashed as a result of that.
In extreme cases ballooning down might not be finished today before
the init process is started, which can consume lots of memory.
In order to avoid random boot crashes in such cases, add a late init
call to wait for ballooning down having finished for PVH/HVM guests.
Warn on console if initial ballooning fails, panic() after stalling
for more than 3 minutes per default. Add a module parameter for
changing this timeout.
[boris: replaced pr_info() with pr_notice()]
Cc: <stable@vger.kernel.org>
Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20211102091944.17487-1-jgross@suse.com
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Here is the big set of driver core changes for 5.16-rc1.
All of these have been in linux-next for a while now with no reported
problems.
Included in here are:
- big update and cleanup of the sysfs abi documentation files
and scripts from Mauro. We are almost at the place where we
can properly check that the running kernel's sysfs abi is
documented fully.
- firmware loader updates
- dyndbg updates
- kernfs cleanups and fixes from Christoph
- device property updates
- component fix
- other minor driver core cleanups and fixes
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYYPbjQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ync9gCfXKMUI1GAnCfJWAwTdTcd18q5akoAoMw32/AH
0yh5TjAWFyFd7xz5d7qs
=itsC
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the big set of driver core changes for 5.16-rc1.
All of these have been in linux-next for a while now with no reported
problems.
Included in here are:
- big update and cleanup of the sysfs abi documentation files and
scripts from Mauro. We are almost at the place where we can
properly check that the running kernel's sysfs abi is documented
fully.
- firmware loader updates
- dyndbg updates
- kernfs cleanups and fixes from Christoph
- device property updates
- component fix
- other minor driver core cleanups and fixes"
* tag 'driver-core-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (122 commits)
device property: Drop redundant NULL checks
x86/build: Tuck away built-in firmware under FW_LOADER
vmlinux.lds.h: wrap built-in firmware support under FW_LOADER
firmware_loader: move struct builtin_fw to the only place used
x86/microcode: Use the firmware_loader built-in API
firmware_loader: remove old DECLARE_BUILTIN_FIRMWARE()
firmware_loader: formalize built-in firmware API
component: do not leave master devres group open after bind
dyndbg: refine verbosity 1-4 summary-detail
gpiolib: acpi: Replace custom code with device_match_acpi_handle()
i2c: acpi: Replace custom function with device_match_acpi_handle()
driver core: Provide device_match_acpi_handle() helper
dyndbg: fix spurious vNpr_info change
dyndbg: no vpr-info on empty queries
dyndbg: vpr-info on remove-module complete, not starting
device property: Add missed header in fwnode.h
Documentation: dyndbg: Improve cli param examples
dyndbg: Remove support for ddebug_query param
dyndbg: make dyndbg a known cli param
dyndbg: show module in vpr-info in dd-exec-queries
...
- Convert /reserved-memory bindings to schemas
- Convert a bunch of NFC bindings to schemas
- Convert bindings to schema: Xilinx USB, Freescale DDR controller, Arm
CCI-400, UBlox Neo-6M, 1-Wire GPIO, MSI controller, ASpeed LPC, OMAP
and Inside-Secure HWRNG, register-bit-led, OV5640, Silead GSL1680,
Elan ekth3000, Marvell bluetooth, TI wlcore, TI bluetooth, ESP ESP8089,
tlm,trusted-foundations, Microchip cap11xx, Ralink SoCs and boards,
and TI sysc
- New binding schemas for: msi-ranges, Aspeed UART routing controller,
palmbus, Xylon LogiCVC display controller, Mediatek's MT7621 SDRAM
memory controller, and Apple M1 PCIe host
- Run schema checks for %.dtb targets
- Improve build time when using DT_SCHEMA_FILES
- Improve error message when dtschema is not found
- Various doc reference fixes in MAINTAINERS
- Convert architectures to common CPU h/w ID parsing function
of_get_cpu_hwid().
- Allow for empty NUMA node IDs which may be hotplugged
- Cleanup of __fdt_scan_reserved_mem()
- Constify device_node parameters
- Update dtc to upstream v1.6.1-19-g0a3a9d3449c8. Adds new checks
'node_name_vs_property_name' and 'interrupt_map'.
- Enable dtc 'unit_address_format' warning by default
- Fix unittest EXPECT text for gpio hog errors
-----BEGIN PGP SIGNATURE-----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=dQa6
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
- Convert /reserved-memory bindings to schemas
- Convert a bunch of NFC bindings to schemas
- Convert bindings to schema: Xilinx USB, Freescale DDR controller, Arm
CCI-400, UBlox Neo-6M, 1-Wire GPIO, MSI controller, ASpeed LPC, OMAP
and Inside-Secure HWRNG, register-bit-led, OV5640, Silead GSL1680,
Elan ekth3000, Marvell bluetooth, TI wlcore, TI bluetooth, ESP
ESP8089, tlm,trusted-foundations, Microchip cap11xx, Ralink SoCs and
boards, and TI sysc
- New binding schemas for: msi-ranges, Aspeed UART routing controller,
palmbus, Xylon LogiCVC display controller, Mediatek's MT7621 SDRAM
memory controller, and Apple M1 PCIe host
- Run schema checks for %.dtb targets
- Improve build time when using DT_SCHEMA_FILES
- Improve error message when dtschema is not found
- Various doc reference fixes in MAINTAINERS
- Convert architectures to common CPU h/w ID parsing function
of_get_cpu_hwid().
- Allow for empty NUMA node IDs which may be hotplugged
- Cleanup of __fdt_scan_reserved_mem()
- Constify device_node parameters
- Update dtc to upstream v1.6.1-19-g0a3a9d3449c8. Adds new checks
'node_name_vs_property_name' and 'interrupt_map'.
- Enable dtc 'unit_address_format' warning by default
- Fix unittest EXPECT text for gpio hog errors
* tag 'devicetree-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (97 commits)
dt-bindings: net: ti,bluetooth: Document default max-speed
dt-bindings: pci: rcar-pci-ep: Document r8a7795
dt-bindings: net: qcom,ipa: IPA does support up to two iommus
of/fdt: Remove of_scan_flat_dt() usage for __fdt_scan_reserved_mem()
of: unittest: document intentional interrupt-map provider build warning
of: unittest: fix EXPECT text for gpio hog errors
of/unittest: Disable new dtc node_name_vs_property_name and interrupt_map warnings
scripts/dtc: Update to upstream version v1.6.1-19-g0a3a9d3449c8
dt-bindings: arm: firmware: tlm,trusted-foundations: Convert txt bindings to yaml
dt-bindings: display: tilcd: Fix endpoint addressing in example
dt-bindings: input: microchip,cap11xx: Convert txt bindings to yaml
dt-bindings: ufs: exynos-ufs: add exynosautov9 compatible
dt-bindings: ufs: exynos-ufs: add io-coherency property
dt-bindings: mips: convert Ralink SoCs and boards to schema
dt-bindings: display: xilinx: Fix example with psgtr
dt-bindings: net: nfc: nxp,pn544: Convert txt bindings to yaml
dt-bindings: Add a help message when dtschema tools are missing
dt-bindings: bus: ti-sysc: Update to use yaml binding
dt-bindings: sram: Allow numbers in sram region node name
dt-bindings: display: Document the Xylon LogiCVC display controller
...
- Some small scripts/kerneldoc fixes
- More Chinese translation work, but at a much reduced rate.
- The tip-tree maintainer's handbook
...plus the usual array of build fixes, typo fixes, etc.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAmGBqbYPHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5YzMoH+wQwUbILvf4FB9h6l0qhbPnvcLMJtDiuIGSu
Ivfc1t+Vh7/waehaYfn9erCNps6oE13Arsy0DDFZcr6vbjXFO5clFoh5jvSJsk+G
zTXzZNB99SoJcZw9r8F7aJDbQNJfSXoyTTOg1mSeXNo+nkBFTSWO7QwCx5M2obaT
76+r8HQpnEYmrGePsOXriV4aOP+yJxuGgkPb+VPlPtQhA7v6dzo5hmoh5tPIzCLd
Fz8ek4aAm9sPEtu1UUoA+7MALZHTFwPv6aSAuyVeNfF/UBL6M4iAwusQyLdPFfoj
JPO7f+1h6a8jKTfTWGjPI3o33DtU/8nc6DgnuBaXBTKW8Dl5Exk=
=q37Q
-----END PGP SIGNATURE-----
Merge tag 'docs-5.16' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"This is a relatively unexciting cycle for documentation.
- Some small scripts/kerneldoc fixes
- More Chinese translation work, but at a much reduced rate.
- The tip-tree maintainer's handbook
...plus the usual array of build fixes, typo fixes, etc"
* tag 'docs-5.16' of git://git.lwn.net/linux: (53 commits)
kernel-doc: support DECLARE_PHY_INTERFACE_MASK()
docs/zh_CN: add core-api xarray translation
docs/zh_CN: add core-api assoc_array translation
speakup: Fix typo in documentation "boo" -> "boot"
docs: submitting-patches: make section about the Link: tag more explicit
docs: deprecated.rst: Clarify open-coded arithmetic with literals
scripts: documentation-file-ref-check: fix bpf selftests path
scripts: documentation-file-ref-check: ignore hidden files
coding-style.rst: trivial: fix location of driver model macros
docs: f2fs: fix text alignment
docs/zh_CN add PCI pci.rst translation
docs/zh_CN add PCI index.rst translation
docs: translations: zh_CN: memory-hotplug.rst: fix a typo
docs: translations: zn_CN: irq-affinity.rst: add a missing extension
block: add documentation for inflight
scripts: kernel-doc: Ignore __alloc_size() attribute
docs: pdfdocs: Adjust \headheight for fancyhdr
docs: UML: user_mode_linux_howto_v2 edits
docs: use the lore redirector everywhere
docs: proc.rst: mountinfo: align columns
...
Pull cgroup updates from Tejun Heo:
- The misc controller now reports allocation rejections through
misc.events instead of printking
- cgroup_mutex usage is reduced to improve scalability of some
operations
- vhost helper threads are now assigned to the right cgroup on cgroup2
- Bug fixes
* 'for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: bpf: Move wrapper for __cgroup_bpf_*() to kernel/bpf/cgroup.c
cgroup: Fix rootcg cpu.stat guest double counting
cgroup: no need for cgroup_mutex for /proc/cgroups
cgroup: remove cgroup_mutex from cgroupstats_build
cgroup: reduce dependency on cgroup_mutex
cgroup: cgroup-v1: do not exclude cgrp_dfl_root
cgroup: Make rebind_subsystems() disable v2 controllers all at once
docs/cgroup: add entry for misc.events
misc_cgroup: remove error log to avoid log flood
misc_cgroup: introduce misc.events to count failures
* More progress on the protected VM front, now with the full
fixed feature set as well as the limitation of some hypercalls
after initialisation.
* Cleanup of the RAZ/WI sysreg handling, which was pointlessly
complicated
* Fixes for the vgic placement in the IPA space, together with a
bunch of selftests
* More memcg accounting of the memory allocated on behalf of a guest
* Timer and vgic selftests
* Workarounds for the Apple M1 broken vgic implementation
* KConfig cleanups
* New kvmarm.mode=none option, for those who really dislike us
RISC-V:
* New KVM port.
x86:
* New API to control TSC offset from userspace
* TSC scaling for nested hypervisors on SVM
* Switch masterclock protection from raw_spin_lock to seqcount
* Clean up function prototypes in the page fault code and avoid
repeated memslot lookups
* Convey the exit reason to userspace on emulation failure
* Configure time between NX page recovery iterations
* Expose Predictive Store Forwarding Disable CPUID leaf
* Allocate page tracking data structures lazily (if the i915
KVM-GT functionality is not compiled in)
* Cleanups, fixes and optimizations for the shadow MMU code
s390:
* SIGP Fixes
* initial preparations for lazy destroy of secure VMs
* storage key improvements/fixes
* Log the guest CPNC
Starting from this release, KVM-PPC patches will come from
Michael Ellerman's PPC tree.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmGBOiEUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNowwf/axlx3g9sgCwQHr12/6UF/7hL/RwP
9z+pGiUzjl2YQE+RjSvLqyd6zXh+h4dOdOKbZDLSkSTbcral/8U70ojKnQsXM0XM
1LoymxBTJqkgQBLm9LjYreEbzrPV4irk4ygEmuk3CPOHZu8xX1ei6c5LdandtM/n
XVUkXsQY+STkmnGv4P3GcPoDththCr0tBTWrFWtxa0w9hYOxx0ay1AZFlgM4FFX0
QFuRc8VBLoDJpIUjbkhsIRIbrlHc/YDGjuYnAU7lV/CIME8vf2BW6uBwIZJdYcDj
0ejozLjodEnuKXQGnc8sXFioLX2gbMyQJEvwCgRvUu/EU7ncFm1lfs7THQ==
=UxKM
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Paolo Bonzini:
"ARM:
- More progress on the protected VM front, now with the full fixed
feature set as well as the limitation of some hypercalls after
initialisation.
- Cleanup of the RAZ/WI sysreg handling, which was pointlessly
complicated
- Fixes for the vgic placement in the IPA space, together with a
bunch of selftests
- More memcg accounting of the memory allocated on behalf of a guest
- Timer and vgic selftests
- Workarounds for the Apple M1 broken vgic implementation
- KConfig cleanups
- New kvmarm.mode=none option, for those who really dislike us
RISC-V:
- New KVM port.
x86:
- New API to control TSC offset from userspace
- TSC scaling for nested hypervisors on SVM
- Switch masterclock protection from raw_spin_lock to seqcount
- Clean up function prototypes in the page fault code and avoid
repeated memslot lookups
- Convey the exit reason to userspace on emulation failure
- Configure time between NX page recovery iterations
- Expose Predictive Store Forwarding Disable CPUID leaf
- Allocate page tracking data structures lazily (if the i915 KVM-GT
functionality is not compiled in)
- Cleanups, fixes and optimizations for the shadow MMU code
s390:
- SIGP Fixes
- initial preparations for lazy destroy of secure VMs
- storage key improvements/fixes
- Log the guest CPNC
Starting from this release, KVM-PPC patches will come from Michael
Ellerman's PPC tree"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (227 commits)
RISC-V: KVM: fix boolreturn.cocci warnings
RISC-V: KVM: remove unneeded semicolon
RISC-V: KVM: Fix GPA passed to __kvm_riscv_hfence_gvma_xyz() functions
RISC-V: KVM: Factor-out FP virtualization into separate sources
KVM: s390: add debug statement for diag 318 CPNC data
KVM: s390: pv: properly handle page flags for protected guests
KVM: s390: Fix handle_sske page fault handling
KVM: x86: SGX must obey the KVM_INTERNAL_ERROR_EMULATION protocol
KVM: x86: On emulation failure, convey the exit reason, etc. to userspace
KVM: x86: Get exit_reason as part of kvm_x86_ops.get_exit_info
KVM: x86: Clarify the kvm_run.emulation_failure structure layout
KVM: s390: Add a routine for setting userspace CPU state
KVM: s390: Simplify SIGP Set Arch handling
KVM: s390: pv: avoid stalls when making pages secure
KVM: s390: pv: avoid stalls for kvm_s390_pv_init_vm
KVM: s390: pv: avoid double free of sida page
KVM: s390: pv: add macros for UVC CC values
s390/mm: optimize reset_guest_reference_bit()
s390/mm: optimize set_guest_storage_key()
s390/mm: no need for pte_alloc_map_lock() if we know the pmd is present
...
-----BEGIN PGP SIGNATURE-----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=eLup
-----END PGP SIGNATURE-----
Merge tag 'media/v5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- New driver for SK Hynix Hi-846 8M pixel camera
- New driver for the ov13b10 camera
- New driver for Renesas R-Car ISP
- mtk-vcodec gained support for version 2 of decoder firmware ABI
- The legacy sir_ir driver got removed
- videobuf2: the vb2_mem_ops kAPI had some improvements
- lots of cleanups, fixes and new features at device drivers
* tag 'media/v5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (328 commits)
media: venus: core: Add sdm660 DT compatible and resource struct
media: dt-bindings: media: venus: Add sdm660 dt schema
media: venus: vdec: decoded picture buffer handling during reconfig sequence
media: venus: Handle fatal errors during encoding and decoding
media: venus: helpers: Add helper to mark fatal vb2 error
media: venus: hfi: Check for sys error on session hfi functions
media: venus: Make sys_error flag an atomic bitops
media: venus: venc: Use pmruntime autosuspend
media: allegro: write vui parameters for HEVC
media: allegro: nal-hevc: implement generator for vui
media: allegro: write correct colorspace into SPS
media: allegro: extract nal value lookup functions to header
media: allegro: correctly scale the bit rate in SPS
media: allegro: remove external QP table
media: allegro: fix row and column in response message
media: allegro: add control to disable encoder buffer
media: allegro: add encoder buffer support
media: allegro: add pm_runtime support
media: allegro: lookup VCU settings
media: allegro: fix module removal if initialization failed
...
- set spec_store_bypass_disable & spectre_v2_user to prctl (Andrea Arcangeli)
-----BEGIN PGP SIGNATURE-----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=NAsc
-----END PGP SIGNATURE-----
Merge tag 'seccomp-v5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull seccomp updates from Kees Cook:
"These are x86-specific, but I carried these since they're also
seccomp-specific.
This flips the defaults for spec_store_bypass_disable and
spectre_v2_user from "seccomp" to "prctl", as enough time has passed
to allow system owners to have updated the defensive stances of their
various workloads, and it's long overdue to unpessimize seccomp
threads.
Extensive rationale and details are in Andrea's main patch.
Summary:
- set spec_store_bypass_disable & spectre_v2_user to prctl (Andrea Arcangeli)"
* tag 'seccomp-v5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
x86: deduplicate the spectre_v2_user documentation
x86: change default to spec_store_bypass_disable=prctl spectre_v2_user=prctl
- Cleanup of extable fixup handling to be more robust, which in turn
allows to make the FPU exception fixups more robust as well.
- Change the return code for signal frame related failures from explicit
error codes to a boolean fail/success as that's all what the calling
code evaluates.
- A large refactoring of the FPU code to prepare for adding AMX support:
- Distangle the public header maze and remove especially the misnomed
kitchen sink internal.h which is despite it's name included all over
the place.
- Add a proper abstraction for the register buffer storage (struct
fpstate) which allows to dynamically size the buffer at runtime by
flipping the pointer to the buffer container from the default
container which is embedded in task_struct::tread::fpu to a
dynamically allocated container with a larger register buffer.
- Convert the code over to the new fpstate mechanism.
- Consolidate the KVM FPU handling by moving the FPU related code into
the FPU core which removes the number of exports and avoids adding
even more export when AMX has to be supported in KVM. This also
removes duplicated code which was of course unnecessary different and
incomplete in the KVM copy.
- Simplify the KVM FPU buffer handling by utilizing the new fpstate
container and just switching the buffer pointer from the user space
buffer to the KVM guest buffer when entering vcpu_run() and flipping
it back when leaving the function. This cuts the memory requirements
of a vCPU for FPU buffers in half and avoids pointless memory copy
operations.
This also solves the so far unresolved problem of adding AMX support
because the current FPU buffer handling of KVM inflicted a circular
dependency between adding AMX support to the core and to KVM. With
the new scheme of switching fpstate AMX support can be added to the
core code without affecting KVM.
- Replace various variables with proper data structures so the extra
information required for adding dynamically enabled FPU features (AMX)
can be added in one place
- Add AMX (Advanved Matrix eXtensions) support (finally):
AMX is a large XSTATE component which is going to be available with
Saphire Rapids XEON CPUs. The feature comes with an extra MSR (MSR_XFD)
which allows to trap the (first) use of an AMX related instruction,
which has two benefits:
1) It allows the kernel to control access to the feature
2) It allows the kernel to dynamically allocate the large register
state buffer instead of burdening every task with the the extra 8K
or larger state storage.
It would have been great to gain this kind of control already with
AVX512.
The support comes with the following infrastructure components:
1) arch_prctl() to
- read the supported features (equivalent to XGETBV(0))
- read the permitted features for a task
- request permission for a dynamically enabled feature
Permission is granted per process, inherited on fork() and cleared
on exec(). The permission policy of the kernel is restricted to
sigaltstack size validation, but the syscall obviously allows
further restrictions via seccomp etc.
2) A stronger sigaltstack size validation for sys_sigaltstack(2) which
takes granted permissions and the potentially resulting larger
signal frame into account. This mechanism can also be used to
enforce factual sigaltstack validation independent of dynamic
features to help with finding potential victims of the 2K
sigaltstack size constant which is broken since AVX512 support was
added.
3) Exception handling for #NM traps to catch first use of a extended
feature via a new cause MSR. If the exception was caused by the use
of such a feature, the handler checks permission for that
feature. If permission has not been granted, the handler sends a
SIGILL like the #UD handler would do if the feature would have been
disabled in XCR0. If permission has been granted, then a new fpstate
which fits the larger buffer requirement is allocated.
In the unlikely case that this allocation fails, the handler sends
SIGSEGV to the task. That's not elegant, but unavoidable as the
other discussed options of preallocation or full per task
permissions come with their own set of horrors for kernel and/or
userspace. So this is the lesser of the evils and SIGSEGV caused by
unexpected memory allocation failures is not a fundamentally new
concept either.
When allocation succeeds, the fpstate properties are filled in to
reflect the extended feature set and the resulting sizes, the
fpu::fpstate pointer is updated accordingly and the trap is disarmed
for this task permanently.
4) Enumeration and size calculations
5) Trap switching via MSR_XFD
The XFD (eXtended Feature Disable) MSR is context switched with the
same life time rules as the FPU register state itself. The mechanism
is keyed off with a static key which is default disabled so !AMX
equipped CPUs have zero overhead. On AMX enabled CPUs the overhead
is limited by comparing the tasks XFD value with a per CPU shadow
variable to avoid redundant MSR writes. In case of switching from a
AMX using task to a non AMX using task or vice versa, the extra MSR
write is obviously inevitable.
All other places which need to be aware of the variable feature sets
and resulting variable sizes are not affected at all because they
retrieve the information (feature set, sizes) unconditonally from
the fpstate properties.
6) Enable the new AMX states
Note, this is relatively new code despite the fact that AMX support is in
the works for more than a year now.
The big refactoring of the FPU code, which allowed to do a proper
integration has been started exactly 3 weeks ago. Refactoring of the
existing FPU code and of the original AMX patches took a week and has
been subject to extensive review and testing. The only fallout which has
not been caught in review and testing right away was restricted to AMX
enabled systems, which is completely irrelevant for anyone outside Intel
and their early access program. There might be dragons lurking as usual,
but so far the fine grained refactoring has held up and eventual yet
undetected fallout is bisectable and should be easily addressable before
the 5.16 release. Famous last words...
Many thanks to Chang Bae and Dave Hansen for working hard on this and
also to the various test teams at Intel who reserved extra capacity to
follow the rapid development of this closely which provides the
confidence level required to offer this rather large update for inclusion
into 5.16-rc1.
-----BEGIN PGP SIGNATURE-----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=x3WL
-----END PGP SIGNATURE-----
Merge tag 'x86-fpu-2021-11-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fpu updates from Thomas Gleixner:
- Cleanup of extable fixup handling to be more robust, which in turn
allows to make the FPU exception fixups more robust as well.
- Change the return code for signal frame related failures from
explicit error codes to a boolean fail/success as that's all what the
calling code evaluates.
- A large refactoring of the FPU code to prepare for adding AMX
support:
- Distangle the public header maze and remove especially the
misnomed kitchen sink internal.h which is despite it's name
included all over the place.
- Add a proper abstraction for the register buffer storage (struct
fpstate) which allows to dynamically size the buffer at runtime
by flipping the pointer to the buffer container from the default
container which is embedded in task_struct::tread::fpu to a
dynamically allocated container with a larger register buffer.
- Convert the code over to the new fpstate mechanism.
- Consolidate the KVM FPU handling by moving the FPU related code
into the FPU core which removes the number of exports and avoids
adding even more export when AMX has to be supported in KVM.
This also removes duplicated code which was of course
unnecessary different and incomplete in the KVM copy.
- Simplify the KVM FPU buffer handling by utilizing the new
fpstate container and just switching the buffer pointer from the
user space buffer to the KVM guest buffer when entering
vcpu_run() and flipping it back when leaving the function. This
cuts the memory requirements of a vCPU for FPU buffers in half
and avoids pointless memory copy operations.
This also solves the so far unresolved problem of adding AMX
support because the current FPU buffer handling of KVM inflicted
a circular dependency between adding AMX support to the core and
to KVM. With the new scheme of switching fpstate AMX support can
be added to the core code without affecting KVM.
- Replace various variables with proper data structures so the
extra information required for adding dynamically enabled FPU
features (AMX) can be added in one place
- Add AMX (Advanced Matrix eXtensions) support (finally):
AMX is a large XSTATE component which is going to be available with
Saphire Rapids XEON CPUs. The feature comes with an extra MSR
(MSR_XFD) which allows to trap the (first) use of an AMX related
instruction, which has two benefits:
1) It allows the kernel to control access to the feature
2) It allows the kernel to dynamically allocate the large register
state buffer instead of burdening every task with the the extra
8K or larger state storage.
It would have been great to gain this kind of control already with
AVX512.
The support comes with the following infrastructure components:
1) arch_prctl() to
- read the supported features (equivalent to XGETBV(0))
- read the permitted features for a task
- request permission for a dynamically enabled feature
Permission is granted per process, inherited on fork() and
cleared on exec(). The permission policy of the kernel is
restricted to sigaltstack size validation, but the syscall
obviously allows further restrictions via seccomp etc.
2) A stronger sigaltstack size validation for sys_sigaltstack(2)
which takes granted permissions and the potentially resulting
larger signal frame into account. This mechanism can also be used
to enforce factual sigaltstack validation independent of dynamic
features to help with finding potential victims of the 2K
sigaltstack size constant which is broken since AVX512 support
was added.
3) Exception handling for #NM traps to catch first use of a extended
feature via a new cause MSR. If the exception was caused by the
use of such a feature, the handler checks permission for that
feature. If permission has not been granted, the handler sends a
SIGILL like the #UD handler would do if the feature would have
been disabled in XCR0. If permission has been granted, then a new
fpstate which fits the larger buffer requirement is allocated.
In the unlikely case that this allocation fails, the handler
sends SIGSEGV to the task. That's not elegant, but unavoidable as
the other discussed options of preallocation or full per task
permissions come with their own set of horrors for kernel and/or
userspace. So this is the lesser of the evils and SIGSEGV caused
by unexpected memory allocation failures is not a fundamentally
new concept either.
When allocation succeeds, the fpstate properties are filled in to
reflect the extended feature set and the resulting sizes, the
fpu::fpstate pointer is updated accordingly and the trap is
disarmed for this task permanently.
4) Enumeration and size calculations
5) Trap switching via MSR_XFD
The XFD (eXtended Feature Disable) MSR is context switched with
the same life time rules as the FPU register state itself. The
mechanism is keyed off with a static key which is default
disabled so !AMX equipped CPUs have zero overhead. On AMX enabled
CPUs the overhead is limited by comparing the tasks XFD value
with a per CPU shadow variable to avoid redundant MSR writes. In
case of switching from a AMX using task to a non AMX using task
or vice versa, the extra MSR write is obviously inevitable.
All other places which need to be aware of the variable feature
sets and resulting variable sizes are not affected at all because
they retrieve the information (feature set, sizes) unconditonally
from the fpstate properties.
6) Enable the new AMX states
Note, this is relatively new code despite the fact that AMX support
is in the works for more than a year now.
The big refactoring of the FPU code, which allowed to do a proper
integration has been started exactly 3 weeks ago. Refactoring of the
existing FPU code and of the original AMX patches took a week and has
been subject to extensive review and testing. The only fallout which
has not been caught in review and testing right away was restricted
to AMX enabled systems, which is completely irrelevant for anyone
outside Intel and their early access program. There might be dragons
lurking as usual, but so far the fine grained refactoring has held up
and eventual yet undetected fallout is bisectable and should be
easily addressable before the 5.16 release. Famous last words...
Many thanks to Chang Bae and Dave Hansen for working hard on this and
also to the various test teams at Intel who reserved extra capacity
to follow the rapid development of this closely which provides the
confidence level required to offer this rather large update for
inclusion into 5.16-rc1
* tag 'x86-fpu-2021-11-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (110 commits)
Documentation/x86: Add documentation for using dynamic XSTATE features
x86/fpu: Include vmalloc.h for vzalloc()
selftests/x86/amx: Add context switch test
selftests/x86/amx: Add test cases for AMX state management
x86/fpu/amx: Enable the AMX feature in 64-bit mode
x86/fpu: Add XFD handling for dynamic states
x86/fpu: Calculate the default sizes independently
x86/fpu/amx: Define AMX state components and have it used for boot-time checks
x86/fpu/xstate: Prepare XSAVE feature table for gaps in state component numbers
x86/fpu/xstate: Add fpstate_realloc()/free()
x86/fpu/xstate: Add XFD #NM handler
x86/fpu: Update XFD state where required
x86/fpu: Add sanity checks for XFD
x86/fpu: Add XFD state to fpstate
x86/msr-index: Add MSRs for XFD
x86/cpufeatures: Add eXtended Feature Disabling (XFD) feature bit
x86/fpu: Reset permission and fpstate on exec()
x86/fpu: Prepare fpu_clone() for dynamically enabled features
x86/fpu/signal: Prepare for variable sigframe length
x86/signal: Use fpu::__state_user_size for sigalt stack validation
...
- Revert the printk format based wchan() symbol resolution as it can leak
the raw value in case that the symbol is not resolvable.
- Make wchan() more robust and work with all kind of unwinders by
enforcing that the task stays blocked while unwinding is in progress.
- Prevent sched_fork() from accessing an invalid sched_task_group
- Improve asymmetric packing logic
- Extend scheduler statistics to RT and DL scheduling classes and add
statistics for bandwith burst to the SCHED_FAIR class.
- Properly account SCHED_IDLE entities
- Prevent a potential deadlock when initial priority is assigned to a
newly created kthread. A recent change to plug a race between cpuset and
__sched_setscheduler() introduced a new lock dependency which is now
triggered. Break the lock dependency chain by moving the priority
assignment to the thread function.
- Fix the idle time reporting in /proc/uptime for NOHZ enabled systems.
- Improve idle balancing in general and especially for NOHZ enabled
systems.
- Provide proper interfaces for live patching so it does not have to
fiddle with scheduler internals.
- Add cluster aware scheduling support.
- A small set of tweaks for RT (irqwork, wait_task_inactive(), various
scheduler options and delaying mmdrop)
- The usual small tweaks and improvements all over the place
-----BEGIN PGP SIGNATURE-----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=fgtS
-----END PGP SIGNATURE-----
Merge tag 'sched-core-2021-11-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Thomas Gleixner:
- Revert the printk format based wchan() symbol resolution as it can
leak the raw value in case that the symbol is not resolvable.
- Make wchan() more robust and work with all kind of unwinders by
enforcing that the task stays blocked while unwinding is in progress.
- Prevent sched_fork() from accessing an invalid sched_task_group
- Improve asymmetric packing logic
- Extend scheduler statistics to RT and DL scheduling classes and add
statistics for bandwith burst to the SCHED_FAIR class.
- Properly account SCHED_IDLE entities
- Prevent a potential deadlock when initial priority is assigned to a
newly created kthread. A recent change to plug a race between cpuset
and __sched_setscheduler() introduced a new lock dependency which is
now triggered. Break the lock dependency chain by moving the priority
assignment to the thread function.
- Fix the idle time reporting in /proc/uptime for NOHZ enabled systems.
- Improve idle balancing in general and especially for NOHZ enabled
systems.
- Provide proper interfaces for live patching so it does not have to
fiddle with scheduler internals.
- Add cluster aware scheduling support.
- A small set of tweaks for RT (irqwork, wait_task_inactive(), various
scheduler options and delaying mmdrop)
- The usual small tweaks and improvements all over the place
* tag 'sched-core-2021-11-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (69 commits)
sched/fair: Cleanup newidle_balance
sched/fair: Remove sysctl_sched_migration_cost condition
sched/fair: Wait before decaying max_newidle_lb_cost
sched/fair: Skip update_blocked_averages if we are defering load balance
sched/fair: Account update_blocked_averages in newidle_balance cost
x86: Fix __get_wchan() for !STACKTRACE
sched,x86: Fix L2 cache mask
sched/core: Remove rq_relock()
sched: Improve wake_up_all_idle_cpus() take #2
irq_work: Also rcuwait for !IRQ_WORK_HARD_IRQ on PREEMPT_RT
irq_work: Handle some irq_work in a per-CPU thread on PREEMPT_RT
irq_work: Allow irq_work_sync() to sleep if irq_work() no IRQ support.
sched/rt: Annotate the RT balancing logic irqwork as IRQ_WORK_HARD_IRQ
sched: Add cluster scheduler level for x86
sched: Add cluster scheduler level in core and related Kconfig for ARM64
topology: Represent clusters of CPUs within a die
sched: Disable -Wunused-but-set-variable
sched: Add wrapper for get_wchan() to keep task blocked
x86: Fix get_wchan() to support the ORC unwinder
proc: Use task_is_running() for wchan in /proc/$pid/stat
...
There is a typo in the speakup documentation. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Link: https://lore.kernel.org/r/20211028182319.613315-1-colin.i.king@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Stephen Rothwell reported the following warning was introduced by commit
c0baf9ac0b ("docs: Document the FAN_FS_ERROR event").
Documentation/admin-guide/filesystem-monitoring.rst:60: WARNING:
Definition list ends without a blank line; unexpected unindent.
Link: https://lore.kernel.org/r/87y26camhe.fsf@collabora.com
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Jan Kara <jack@suse.cz>
- More progress on the protected VM front, now with the full
fixed feature set as well as the limitation of some hypercalls
after initialisation.
- Cleanup of the RAZ/WI sysreg handling, which was pointlessly
complicated
- Fixes for the vgic placement in the IPA space, together with a
bunch of selftests
- More memcg accounting of the memory allocated on behalf of a guest
- Timer and vgic selftests
- Workarounds for the Apple M1 broken vgic implementation
- KConfig cleanups
- New kvmarm.mode=none option, for those who really dislike us
-----BEGIN PGP SIGNATURE-----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=qBAO
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for Linux 5.16
- More progress on the protected VM front, now with the full
fixed feature set as well as the limitation of some hypercalls
after initialisation.
- Cleanup of the RAZ/WI sysreg handling, which was pointlessly
complicated
- Fixes for the vgic placement in the IPA space, together with a
bunch of selftests
- More memcg accounting of the memory allocated on behalf of a guest
- Timer and vgic selftests
- Workarounds for the Apple M1 broken vgic implementation
- KConfig cleanups
- New kvmarm.mode=none option, for those who really dislike us
Document the FAN_FS_ERROR event for user administrators and user space
developers.
Link: https://lore.kernel.org/r/20211025192746.66445-32-krisman@collabora.com
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jan Kara <jack@suse.cz>
Some applications map the same memory area for DMA multiple times while
also mapping significant amounts of memory. With our current DMA code
these applications will run out of DMA addresses after mapping half of
the available memory because the number of DMA mappings is constrained
by the number of concurrently active DMA addresses we support which in
turn is limited by the minimum of hardware constraints and high_memory.
Limiting the number of active DMA addresses to high_memory is only
a heuristic to save memory used by the iommu_bitmap and DMA page tables
however. This was added under the assumption that it rarely makes sense
to DMA map more than system memory.
To accommodate special applications which insist on double mapping, which
works on other platforms, allow specifying a factor of how many times
installed memory is available as DMA address space. Use 0 as a special
value to apply no constraints beyond what hardware dictates at the
expense of significantly more memory use.
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
For historical reasons MINSIGSTKSZ is a constant which became already too
small with AVX512 support.
Add a mechanism to enforce strict checking of the sigaltstack size against
the real size of the FPU frame.
The strict check can be enabled via a config option and can also be
controlled via the kernel command line option 'strict_sas_size' independent
of the config switch.
Enabling it might break existing applications which allocate a too small
sigaltstack but 'work' because they never get a signal delivered. Though it
can be handy to filter out binaries which are not yet aware of
AT_MINSIGSTKSZ.
Also the upcoming support for dynamically enabled FPU features requires a
strict sanity check to ensure that:
- Enabling of a dynamic feature, which changes the sigframe size fits
into an enabled sigaltstack
- Installing a too small sigaltstack after a dynamic feature has been
added is not possible.
Implement the base check which is controlled by config and command line
options.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20211021225527.10184-3-chang.seok.bae@intel.com
Currently, the NX huge page recovery thread wakes up every minute and
zaps 1/nx_huge_pages_recovery_ratio of the total number of split NX
huge pages at a time. This is intended to ensure that only a
relatively small number of pages get zapped at a time. But for very
large VMs (or more specifically, VMs with a large number of
executable pages), a period of 1 minute could still result in this
number being too high (unless the ratio is changed significantly,
but that can result in split pages lingering on for too long).
This change makes the period configurable instead of fixing it at
1 minute. Users of large VMs can then adjust the period and/or the
ratio to reduce the number of pages zapped at one time while still
maintaining the same overall duration for cycling through the
entire list. By default, KVM derives a period from the ratio such
that a page will remain on the list for 1 hour on average.
Signed-off-by: Junaid Shahid <junaids@google.com>
Message-Id: <20211020010627.305925-1-junaids@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
adjust current v*pr_info() calls to fit an overview..detail scheme:
1- module level activity: add/remove, etc
2- command ingest, splitting, summary of effects.
per >control write
3- command parsing: op, flags, search terms
4- per-site change msg
can yield ~3k x 2 logs per echo "+p;-p" > command.
Summarize these 4 levels in MODULE_PARM_DESC, and update verbose=3 in Doc.
2- is new, to isolate a problem where a stress-test script (which
feeds ~4kb multi-command strings) would produce short writes,
truncating last command and causing parsing errors, which confused
test results. The script fix was to use syswrite, to deliver full
proper commands.
4- gets per-callsite "changed:" pr-infos, which are very noisy during
stress tests, and formerly obscured v1-3 messages, and overwhelmed the
static-key workload being tested.
The verbose parameter has previously seen adjustment:
commit 481c0e33f1 ("dyndbg: refine debug verbosity; 1 is basic, 2 more chatty")
The script driving these adjustments is:
!/usr/bin/perl -w
=for Doc
1st purpose was to benchmark the effect of wildcard queries on query
performance; if wildcards are risk free cheap enough, we can deploy
them in the (floating) format search. 1st finding: wildcards take 2x
as long to process.
2nd purpose was to benchmark real static-key changes VS simple flag
changes. Found ~100x decrease for the hard work.
The script maximizes workload per >control by packing it a ~4kb
string of "+p; -p;" commands; this uncovered some broken stuff.
The 85th query failed, and appears to be truncated, so is gramatically
incorrect. Its either an error here, or in the kernel. Its not
happening atm, retest.
Plot thickens: fail only happens doing +-p, not +-mf, likely load
dependent. Error remains consistent. Looks like a short write,
longer on writer than kernel-reader. Try syswrite on handle to
control this. That fixed short write.
=cut
use Getopt::Std;
getopts('vN:k:', \my %opts) or die <<EOH;
$0 options:
-v verbose
-k=n kernel dyndbg verbosity
-N=n number of loops.. tbrc
EOH
$opts{N} //= 10; # !undef, 0 tests too long.
my $ctrl = '/proc/dynamic_debug/control';
vx($opts{k}) if defined $opts{k}; # works on -k0
open(my $CTL, '>', $ctrl) or die "cant open $ctrl for writing: $!\n";
sub vx {
my $arg = shift;
my $cmd = "echo $arg > /sys/module/dynamic_debug/parameters/verbose";
system($cmd);
warn("vx problem: rc:$? err:$! qry: $cmd\n") if ($?);
}
sub qryOK {
my $qry = shift;
print "syntax test: <\n$qry>\n" if $opts{v};
my $bytes = syswrite $CTL, $qry;
printf "short read: $bytes / %d\n", length $qry if $bytes < length $qry;
if ($?) {
warn "rc:$? err:$! qry: $qry\n";
return 0;
}
return 1;
}
sub build_queries {
my ($cmd, $flags, $ct) = @_;
# build experiment and reference queries
my $cycle = " $cmd +$flags # on ; $cmd -$flags # off \n";
my $ref = " +$flags ; -$flags \n";
my $len = length $cycle;
my $max = int(4096 / $len); # break/fit to buffer size
$ct |= $max;
print "qry: ct:$max x << \n$cycle >>\n";
return unless qryOK($ref);
return unless qryOK($cycle);
my $wild = $cycle x $ct;
my $empty = $ref x $ct;
printf "len: %d, %d\n", length $wild, length $empty;
return { trial => $wild,
ref => $empty,
probe => $cycle,
zero => $ref,
count => $ct,
max => $max
};
}
my $query_set = build_queries(' file "*" module "*" func "*" ', "mf");
qryOK($query_set->{zero});
qryOK($query_set->{probe});
qryOK($query_set->{ref});
qryOK($query_set->{trial});
use Benchmark;
sub dobatch {
my ($cmd, $flags, $reps, $ct) = @_;
$reps ||= $opts{N};
my $qs = build_queries($cmd, $flags, $ct);
timethese($reps,
{
wildcards => sub {
syswrite $CTL, $qs->{trial};
},
no_search => sub {
syswrite $CTL, $qs->{ref};
}
}
);
}
sub bench_static_key_toggle {
vx 0;
dobatch(' file "*" module "*" func "*" ', "mf");
dobatch(' file "*" module "*" func "*" ', "p");
}
sub bench_verbose_levels {
for my $i (0..4) {
vx $i;
dobatch(' file "*" module "*" func "*" ', "mf");
}
}
bench_static_key_toggle();
__END__
Heres how the test-script runs:
:: verbose=3 parsing info
[ 48.401646] dyndbg: query 95: "file "*" module "*" func "*" -mf # off " mod:*
[ 48.402040] dyndbg: split into words: "file" "*" "module" "*" "func" "*" "-mf"
[ 48.402456] dyndbg: op='-'
[ 48.402615] dyndbg: flags=0x6
[ 48.402779] dyndbg: *flagsp=0x0 *maskp=0xfffffff9
[ 48.403033] dyndbg: parsed: func="*" file="*" module="*" format="" lineno=0-0
[ 48.403674] dyndbg: applied: func="*" file="*" module="*" format="" lineno=0-0
:: verbose=2 >control summary.
~300k site matches/changes per 4kb command
[ 48.404063] dyndbg: processed 96 queries, with 296160 matches, 0 errs
:: 2 queries against each other, no-search vs all-wildcard-search
qry: ct:48 x <<
file "*" module "*" func "*" +mf # on ; file "*" module "*" func "*" -mf # off
>>
len: 4080, 576
Benchmark: timing 10 iterations of no_search, wildcards...
no_search: 0 wallclock secs ( 0.00 usr + 0.03 sys = 0.03 CPU) @ 333.33/s (n=10)
(warning: too few iterations for a reliable count)
wildcards: 0 wallclock secs ( 0.00 usr + 0.09 sys = 0.09 CPU) @ 111.11/s (n=10)
(warning: too few iterations for a reliable count)
:: 2 queries, both doing real work / changing stati-key states.
qry: ct:49 x <<
file "*" module "*" func "*" +p # on ; file "*" module "*" func "*" -p # off
>>
len: 4067, 490
Benchmark: timing 10 iterations of no_search, wildcards...
no_search: 20 wallclock secs ( 0.00 usr + 20.36 sys = 20.36 CPU) @ 0.49/s (n=10)
wildcards: 21 wallclock secs ( 0.00 usr + 21.08 sys = 21.08 CPU) @ 0.47/s (n=10)
bash-5.1#
Thats 150k static-key-toggles / sec
~600x slower than simple flags
on qemu --smp 3 run
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20211019210746.185307-1-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Both ACPI and DT provide the ability to describe additional layers of
topology between that of individual cores and higher level constructs
such as the level at which the last level cache is shared.
In ACPI this can be represented in PPTT as a Processor Hierarchy
Node Structure [1] that is the parent of the CPU cores and in turn
has a parent Processor Hierarchy Nodes Structure representing
a higher level of topology.
For example Kunpeng 920 has 6 or 8 clusters in each NUMA node, and each
cluster has 4 cpus. All clusters share L3 cache data, but each cluster
has local L3 tag. On the other hand, each clusters will share some
internal system bus.
+-----------------------------------+ +---------+
| +------+ +------+ +--------------------------+ |
| | CPU0 | | cpu1 | | +-----------+ | |
| +------+ +------+ | | | | |
| +----+ L3 | | |
| +------+ +------+ cluster | | tag | | |
| | CPU2 | | CPU3 | | | | | |
| +------+ +------+ | +-----------+ | |
| | | |
+-----------------------------------+ | |
+-----------------------------------+ | |
| +------+ +------+ +--------------------------+ |
| | | | | | +-----------+ | |
| +------+ +------+ | | | | |
| | | L3 | | |
| +------+ +------+ +----+ tag | | |
| | | | | | | | | |
| +------+ +------+ | +-----------+ | |
| | | |
+-----------------------------------+ | L3 |
| data |
+-----------------------------------+ | |
| +------+ +------+ | +-----------+ | |
| | | | | | | | | |
| +------+ +------+ +----+ L3 | | |
| | | tag | | |
| +------+ +------+ | | | | |
| | | | | | +-----------+ | |
| +------+ +------+ +--------------------------+ |
+-----------------------------------| | |
+-----------------------------------| | |
| +------+ +------+ +--------------------------+ |
| | | | | | +-----------+ | |
| +------+ +------+ | | | | |
| +----+ L3 | | |
| +------+ +------+ | | tag | | |
| | | | | | | | | |
| +------+ +------+ | +-----------+ | |
| | | |
+-----------------------------------+ | |
+-----------------------------------+ | |
| +------+ +------+ +--------------------------+ |
| | | | | | +-----------+ | |
| +------+ +------+ | | | | |
| | | L3 | | |
| +------+ +------+ +---+ tag | | |
| | | | | | | | | |
| +------+ +------+ | +-----------+ | |
| | | |
+-----------------------------------+ | |
+-----------------------------------+ | |
| +------+ +------+ +--------------------------+ |
| | | | | | +-----------+ | |
| +------+ +------+ | | | | |
| | | L3 | | |
| +------+ +------+ +--+ tag | | |
| | | | | | | | | |
| +------+ +------+ | +-----------+ | |
| | +---------+
+-----------------------------------+
That means spreading tasks among clusters will bring more bandwidth
while packing tasks within one cluster will lead to smaller cache
synchronization latency. So both kernel and userspace will have
a chance to leverage this topology to deploy tasks accordingly to
achieve either smaller cache latency within one cluster or an even
distribution of load among clusters for higher throughput.
This patch exposes cluster topology to both kernel and userspace.
Libraried like hwloc will know cluster by cluster_cpus and related
sysfs attributes. PoC of HWLOC support at [2].
Note this patch only handle the ACPI case.
Special consideration is needed for SMT processors, where it is
necessary to move 2 levels up the hierarchy from the leaf nodes
(thus skipping the processor core level).
Note that arm64 / ACPI does not provide any means of identifying
a die level in the topology but that may be unrelate to the cluster
level.
[1] ACPI Specification 6.3 - section 5.2.29.1 processor hierarchy node
structure (Type 0)
[2] https://github.com/hisilicon/hwloc/tree/linux-cluster
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Signed-off-by: Barry Song <song.bao.hua@hisilicon.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210924085104.44806-2-21cnbao@gmail.com
Jim pointed out that using $module.dyndbg= is always a more flexible
choice for using dynamic debug on the command line. The $module.dyndbg
style is checked at boot and handles if $module is a builtin. If it is
actually a loadable module, it is handled again later when the module is
loaded.
If you just use dyndbg="module $module +p" dynamic debug is only enabled
when $module is a builtin.
It was recommended to illustrate wildcard usage as well.
Suggested-by: Jim Cromie <jim.cromie@gmail.com>
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: Jason Baron <jbaron@akamai.com>
Link: https://lore.kernel.org/r/1634139622-20667-4-git-send-email-jbaron@akamai.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This param has been deprecated for a very long time now, let's rip it
out.
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: Jason Baron <jbaron@akamai.com>
Link: https://lore.kernel.org/r/1634139622-20667-3-git-send-email-jbaron@akamai.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull cgroup fixes from Tejun Heo:
"All documentation / comment updates"
* 'for-5.15-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroupv2, docs: fix misinformation in "device controller" section
cgroup/cpuset: Change references of cpuset_mutex to cpuset_rwsem
docs/cgroup: remove some duplicate words
* kvm-arm64/pkvm/restrict-hypercalls:
: .
: Restrict the use of some hypercalls as well as kexec once
: the protected KVM mode has been initialised.
: .
Documentation: admin-guide: Document side effects when pKVM is enabled
Signed-off-by: Marc Zyngier <maz@kernel.org>
Recent changes to KVM for arm64 has made it impossible for the host to
hibernate or use kexec when protected mode is enabled via the kernel
command line.
There are people who rely on kexec (for example, developers who use kexec
as a quick way to test a new kernel), let's document this change in
behaviour, so it doesn't catch them by surprise and we have a place to
point people to if it does.
Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211011153835.291147-1-alexandru.elisei@arm.com
Although KVM can be compiled out of the kernel, it cannot be disabled
at runtime. Allow this possibility by introducing a new mode that
will prevent KVM from initialising.
This is useful in the (limited) circumstances where you don't want
KVM to be available (what is wrong with you?), or when you want
to install another hypervisor instead (good luck with that).
Reviewed-by: David Brazdil <dbrazdil@google.com>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Andrew Scull <ascull@google.com>
Link: https://lore.kernel.org/r/20211001170553.3062988-1-maz@kernel.org
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCYWBSIwAKCRCAXGG7T9hj
vrXxAP9na1EqRJ+SpWyvxHY1jMaIrbg1bgnOc+GsnWxU5liW5AEA4h1HjHtVtrzL
3vweIS6u2fanrWlYML/daQ3r6EuLPQc=
=iXsP
-----END PGP SIGNATURE-----
Merge tag 'for-linus-5.15b-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
- fix two minor issues in the Xen privcmd driver plus a cleanup patch
for that driver
- fix multiple issues related to running as PVH guest and some related
earlyprintk fixes for other Xen guest types
- fix an issue introduced in 5.15 the Xen balloon driver
* tag 'for-linus-5.15b-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/balloon: fix cancelled balloon action
xen/x86: adjust data placement
x86/PVH: adjust function/data placement
xen/x86: hook up xen_banner() also for PVH
xen/x86: generalize preferred console model from PV to PVH Dom0
xen/x86: make "earlyprintk=xen" work for HVM/PVH DomU
xen/x86: allow "earlyprintk=xen" to work for PV Dom0
xen/x86: make "earlyprintk=xen" work better for PVH Dom0
xen/x86: allow PVH Dom0 without XEN_PV=y
xen/x86: prevent PVH type from getting clobbered
xen/privcmd: drop "pages" parameter from xen_remap_pfn()
xen/privcmd: fix error handling in mmap-resource processing
xen/privcmd: replace kcalloc() by kvcalloc() when allocating empty pages
Add MIPI CCS compliant devices, a few Sony IMX, Hynix Hi-846 and
Omnivision ov13b10 sensors and the DW9768 lens driver to the list of
supported devices. Also drop SMIA since as a standard it is obsolete.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add the SK Hynix Hi-846 8M Pixel CMOS image sensor to the i2c-cardlist.
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
xenboot_write_console() is dealing with these quite fine so I don't see
why xenboot_console_setup() would return -ENOENT in this case.
Adjust documentation accordingly.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/3d212583-700e-8b2d-727a-845ef33ac265@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmFaG98eHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGosAH/jqy5B2BIEE39O+8
QTr3vO54SyRRuY/d98wZ+O4SPjfqfpCHuyjKt9YJpEdmzH754NC9gSPOOBegnvHI
DfrWaivmJ5mdjN2h7+JVqjs58krUv98wWNa5xfvqUp5H7wF3WQg3AxsaMKS1PePD
kFHfeFbxsg2gYhyhPK6gHtwLn6dEsx9bGny2bKvCh6KuJQEiUXoEcgnFzjFgLNxp
T5zI1cNSCNUzwRIe+vqQRlfVR2JlSI4tiy0zNJWy9dQ5Z4HOSbFcEz5Df2N7qNYn
/MqruaASmyREgo9yLHpR1BSyzrea8MCckY04ycYqKZb7gDwcrpAe4QVw2I/Fuzu9
q//PV4I=
=+mYg
-----END PGP SIGNATURE-----
Merge tag 'v5.15-rc4' into docs-next
This is needed to get a docs fix that entered via the DRM tree; testers
have requested it so that PDF builds in docs-next work again.
This would need updating to make prctl be the new default, but it's
simpler to delete it and refer to the dup.
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20201105001406.13005-2-aarcange@redhat.com
Switch the kernel default of SSBD and STIBP to the ones with
CONFIG_SECCOMP=n (i.e. spec_store_bypass_disable=prctl
spectre_v2_user=prctl) even if CONFIG_SECCOMP=y.
Several motivations listed below:
- If SMT is enabled the seccomp jail can still attack the rest of the
system even with spectre_v2_user=seccomp by using MDS-HT (except on
XEON PHI where MDS can be tamed with SMT left enabled, but that's a
special case). Setting STIBP become a very expensive window dressing
after MDS-HT was discovered.
- The seccomp jail cannot attack the kernel with spectre-v2-HT
regardless (even if STIBP is not set), but with MDS-HT the seccomp
jail can attack the kernel too.
- With spec_store_bypass_disable=prctl the seccomp jail can attack the
other userland (guest or host mode) using spectre-v2-HT, but the
userland attack is already mitigated by both ASLR and pid namespaces
for host userland and through virt isolation with libkrun or
kata. (if something if somebody is worried about spectre-v2-HT it's
best to mount proc with hidepid=2,gid=proc on workstations where not
all apps may run under container runtimes, rather than slowing down
all seccomp jails, but the best is to add pid namespaces to the
seccomp jail). As opposed MDS-HT is not mitigated and the seccomp
jail can still attack all other host and guest userland if SMT is
enabled even with spec_store_bypass_disable=seccomp.
- If full security is required then MDS-HT must also be mitigated with
nosmt and then spectre_v2_user=prctl and spectre_v2_user=seccomp
would become identical.
- Setting spectre_v2_user=seccomp is overall lower priority than to
setting javascript.options.wasm false in about:config to protect
against remote wasm MDS-HT, instead of worrying about Spectre-v2-HT
and STIBP which again is already statistically well mitigated by
other means in userland and it's fully mitigated in kernel with
retpolines (unlike the wasm assist call with MDS-HT).
- SSBD is needed to prevent reading the JIT memory and the primary
user being the OpenJDK. However the primary user of SSBD wouldn't be
covered by spec_store_bypass_disable=seccomp because it doesn't use
seccomp and the primary user also explicitly declined to set
PR_SET_SPECULATION_CTRL+PR_SPEC_STORE_BYPASS despite it easily
could. In fact it would need to set it only when the sandboxing
mechanism is enabled for javaws applets, but it still declined it by
declaring security within the same user address space as an
untenable objective for their JIT, even in the sandboxing case where
performance would be a lesser concern (for the record: I kind of
disagree in not setting PR_SPEC_STORE_BYPASS in the sandbox case and
I prefer to run javaws through a wrapper that sets
PR_SPEC_STORE_BYPASS if I need). In turn it can be inferred that
even if the primary user of SSBD would use seccomp, they would
invoke it with SECCOMP_FILTER_FLAG_SPEC_ALLOW by now.
- runc/crun already set SECCOMP_FILTER_FLAG_SPEC_ALLOW by default, k8s
and podman have a default json seccomp allowlist that cannot be
slowed down, so for the #1 seccomp user this change is already a
noop.
- systemd/sshd or other apps that use seccomp, if they really need
STIBP or SSBD, they need to explicitly set the
PR_SET_SPECULATION_CTRL by now. The stibp/ssbd seccomp blind
catch-all approach was done probably initially with a wishful
thinking objective to pretend to have a peace of mind that it could
magically fix it all. That was wishful thinking before MDS-HT was
discovered, but after MDS-HT has been discovered it become just
window dressing.
- For qemu "-sandbox" seccomp jail it wouldn't make sense to set STIBP
or SSBD. SSBD doesn't help with KVM because there's no JIT (if it's
needed with TCG it should be an opt-in with
PR_SET_SPECULATION_CTRL+PR_SPEC_STORE_BYPASS and it shouldn't
slowdown KVM for nothing). For qemu+KVM STIBP would be even more
window dressing than it is for all other apps, because in the
qemu+KVM case there's not only the MDS attack to worry about with
SMT enabled. Even after disabling SMT, there's still a theoretical
spectre-v2 attack possible within the same thread context from guest
mode to host ring3 that the host kernel retpoline mitigation has no
theoretical chance to mitigate. On some kernels a
ibrs-always/ibrs-retpoline opt-in model is provided that will
enabled IBRS in the qemu host ring3 userland which fixes this
theoretical concern. Only after enabling IBRS in the host userland
it would then make sense to proceed and worry about STIBP and an
attack on the other host userland, but then again SMT would need to
be disabled for full security anyway, so that would render STIBP
again a noop.
- last but not the least: the lack of "spec_store_bypass_disable=prctl
spectre_v2_user=prctl" means the moment a guest boots and
sshd/systemd runs, the guest kernel will write to SPEC_CTRL MSR
which will make the guest vmexit forever slower, forcing KVM to
issue a very slow rdmsr instruction at every vmexit. So the end
result is that SPEC_CTRL MSR is only available in GCE. Most other
public cloud providers don't expose SPEC_CTRL, which means that not
only STIBP/SSBD isn't available, but IBPB isn't available either
(which would cause no overhead to the guest or the hypervisor
because it's write only and requires no reading during vmexit). So
the current default already net loss in security (missing IBPB)
which means most public cloud providers cannot achieve a fully
secure guest with nosmt (and nosmt is enough to fully mitigate
MDS-HT). It also means GCE and is unfairly penalized in performance
because it provides the option to enable full security in the guest
as an opt-in (i.e. nosmt and IBPB). So this change will allow all
cloud providers to expose SPEC_CTRL without incurring into any
hypervisor slowdown and at the same time it will remove the unfair
penalization of GCE performance for doing the right thing and it'll
allow to get full security with nosmt with IBPB being available (and
STIBP becoming meaningless).
Example to put things in prospective: the STIBP enabled in seccomp has
never been about protecting apps using seccomp like sshd from an
attack from a malicious userland, but to the contrary it has always
been about protecting the system from an attack from sshd, after a
successful remote network exploit against sshd. In fact initially it
wasn't obvious STIBP would work both ways (STIBP was about preventing
the task that runs with STIBP to be attacked with spectre-v2-HT, but
accidentally in the STIBP case it also prevents the attack in the
other direction). In the hypothetical case that sshd has been remotely
exploited the last concern should be STIBP being set, because it'll be
still possible to obtain info even from the kernel by using MDS if
nosmt wasn't set (and if it was set, STIBP is a noop in the first
place). As opposed kernel cannot leak anything with spectre-v2 HT
because of retpolines and the userland is mitigated by ASLR already
and ideally PID namespaces too. If something it'd be worth checking if
sshd run the seccomp thread under pid namespaces too if available in
the running kernel. SSBD also would be a noop for sshd, since sshd
uses no JIT. If sshd prefers to keep doing the STIBP window dressing
exercise, it still can even after this change of defaults by opting-in
with PR_SPEC_INDIRECT_BRANCH.
Ultimately setting SSBD and STIBP by default for all seccomp jails is
a bad sweet spot and bad default with more cons than pros that end up
reducing security in the public cloud (by giving an huge incentive to
not expose SPEC_CTRL which would be needed to get full security with
IBPB after setting nosmt in the guest) and by excessively hurting
performance to more secure apps using seccomp that end up having to
opt out with SECCOMP_FILTER_FLAG_SPEC_ALLOW.
The following is the verified result of the new default with SMT
enabled:
(gdb) print spectre_v2_user_stibp
$1 = SPECTRE_V2_USER_PRCTL
(gdb) print spectre_v2_user_ibpb
$2 = SPECTRE_V2_USER_PRCTL
(gdb) print ssb_mode
$3 = SPEC_STORE_BYPASS_PRCTL
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20201104235054.5678-1-aarcange@redhat.com
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/lkml/AAA2EF2C-293D-4D5B-BFA6-FF655105CD84@redhat.com
Acked-by: Waiman Long <longman@redhat.com>
Link: https://lore.kernel.org/lkml/c0722838-06f7-da6b-138f-e0f26362f16a@redhat.com
Modify the scaler subdevice to accept setting the resolution of the source
pad (previously the source resolution would always be 3 times the sink for
both dimensions). Now any resolution can be set at src (even smaller ones)
and the sink video will be scaled to match it.
Test example: With the vimc module up (using the default vimc topology)
media-ctl -d platform:vimc -V '"Sensor A":0[fmt:SBGGR8_1X8/640x480]'
media-ctl -d platform:vimc -V '"Debayer A":0[fmt:SBGGR8_1X8/640x480]'
media-ctl -d platform:vimc -V '"Scaler":0[fmt:RGB888_1X24/640x480]'
media-ctl -d platform:vimc -V '"Scaler":0[crop:(100,50)/400x150]'
media-ctl -d platform:vimc -V '"Scaler":1[fmt:RGB888_1X24/300x700]'
v4l2-ctl -z platform:vimc -d "RGB/YUV Capture" -v width=300,height=700
v4l2-ctl -z platform:vimc -d "Raw Capture 0" -v pixelformat=BA81
v4l2-ctl --stream-mmap --stream-count=10 -z platform:vimc -d "RGB/YUV Capture" \
--stream-to=test.raw
The result will be a cropped stream that can be checked with the command
ffplay -loglevel warning -v info -f rawvideo -pixel_format rgb24 \
-video_size "300x700" test.raw
Co-developed-by: Gabriela Bittencourt <gabrielabittencourt00@gmail.com>
Signed-off-by: Gabriela Bittencourt <gabrielabittencourt00@gmail.com>
Co-developed-by: Gabriel Francisco Mandaji <gfmandaji@gmail.com>
Signed-off-by: Gabriel Francisco Mandaji <gfmandaji@gmail.com>
Signed-off-by: Pedro Terra <pedro@terraco.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
imx6ull-evk has a parallel OV5640 sensor.
Provide an example for imx6ull-evk capture to improve the document.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Acked-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Use the header-rows option of the flat-table directive in order to have
the first row displayed as a header. Also capitalize these headers.
These changes make the tables easier to read.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The V4L2_PIX_FMT_HM12 format is actually a simple NV12 tiled format,
with 16x16 linear tiles. Rename the format and move its documentation
together with the other tiled NV12 formats.
Keep V4L2_PIX_FMT_HM12 for application compatibility.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Commit 7ac592aa35 ("sched: prctl() core-scheduling interface")
made use of enum pid_type in prctl's arg4; this type and the associated
enumeration definitions are not exposed to userspace. Christian
has suggested to provide additional macro definitions that convey
the meaning of the type argument more in alignment with its actual
usage, and this patch does exactly that.
Link: https://lore.kernel.org/r/20210825170613.GA3884@asgard.redhat.com
Suggested-by: Christian Brauner <christian.brauner@ubuntu.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Eugene Syromiatnikov <esyr@redhat.com>
Complements: 7ac592aa35 ("sched: prctl() core-scheduling interface")
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Mentioning the current missing information in the pagemap and alternatives
on how to retrieve it, in case someone stumbles upon unexpected behaviour.
Signed-off-by: Tiberiu A Georgescu <tiberiu.georgescu@nutanix.com>
Reviewed-by: Ivan Teterevkov <ivan.teterevkov@nutanix.com>
Reviewed-by: Florian Schmidt <florian.schmidt@nutanix.com>
Reviewed-by: Carl Waldspurger <carl.waldspurger@nutanix.com>
Reviewed-by: Jonathan Davies <jonathan.davies@nutanix.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Link: https://lore.kernel.org/r/20210923064618.157046-2-tiberiu.georgescu@nutanix.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Hotmail was rejected by the mailing list, switched to gmail to resend.
1. Clarify cgroup BPF program type and attach type;
2. Fix file path broken.
Signed-off-by: ArthurChiao <arthurchiao@hotmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
When I tried to add some new entries to cgroup-v2.rst, I found that
the description of memory.events had some repetitive words, so I
tried to delete them.
Signed-off-by: Chunguang Xu <brookxu@tencent.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Merge patch series from Nick Desaulniers to update the minimum gcc
version to 5.1.
This is some of the left-overs from the merge window that I didn't want
to deal with yesterday, so it comes in after -rc1 but was sent before.
Gcc-4.9 support has been an annoyance for some time, and with -Werror I
had the choice of applying a fairly big patch from Kees Cook to remove a
fair number of initializer warnings (still leaving some), or this patch
series from Nick that just removes the source of the problem.
The initializer cleanups might still be worth it regardless, but
honestly, I preferred just tackling the problem with gcc-4.9 head-on.
We've been more aggressiuve about no longer having to care about
compilers that were released a long time ago, and I think it's been a
good thing.
I added a couple of patches on top to sort out a few left-overs now that
we no longer support gcc-4.x.
As noted by Arnd, as a result of this minimum compiler version upgrade
we can probably change our use of '--std=gnu89' to '--std=gnu11', and
finally start using local loop declarations etc. But this series does
_not_ yet do that.
Link: https://lore.kernel.org/all/20210909182525.372ee687@canb.auug.org.au/
Link: https://lore.kernel.org/lkml/CAK7LNASs6dvU6D3jL2GG3jW58fXfaj6VNOe55NJnTB8UPuk2pA@mail.gmail.com/
Link: https://github.com/ClangBuiltLinux/linux/issues/1438
* emailed patches from Nick Desaulniers <ndesaulniers@google.com>:
Drop some straggling mentions of gcc-4.9 as being stale
compiler_attributes.h: drop __has_attribute() support for gcc4
vmlinux.lds.h: remove old check for GCC 4.9
compiler-gcc.h: drop checks for older GCC versions
Makefile: drop GCC < 5 -fno-var-tracking-assignments workaround
arm64: remove GCC version check for ARCH_SUPPORTS_INT128
powerpc: remove GCC version check for UPD_CONSTR
riscv: remove Kconfig check for GCC version for ARCH_RV64I
Kconfig.debug: drop GCC 5+ version check for DWARF5
mm/ksm: remove old GCC 4.9+ check
compiler.h: drop fallback overflow checkers
Documentation: raise minimum supported version of GCC to 5.1
Fix up the admin-guide README file to the new gcc-5.1 requirement, and
remove a stale comment about gcc support for the __assume_aligned__
attribute.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Add migrate-disable counter to tracing header
- Fix error handling in event probes
- Fix missed unlock in osnoise in error path
- Fix merge issue with tools/bootconfig
- Clean up bootconfig data when init memory is removed
- Fix bootconfig to loop only on subkeys
- Have kernel command lines override bootconfig options
- Increase field counts for synthetic events
- Have histograms dynamic allocate event elements to save space
- Fixes in testing and documentation
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCYToFZBQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qtg5AP44U3Dn1m1lQo3y1DJ9kUP3HsAsDofS
Cv7ZM9tLV2p4MQEA9KJc3/B/5BZEK1kso3uLeLT+WxJOC4YStXY19WwmjAI=
=Wuo+
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull more tracing updates from Steven Rostedt:
- Add migrate-disable counter to tracing header
- Fix error handling in event probes
- Fix missed unlock in osnoise in error path
- Fix merge issue with tools/bootconfig
- Clean up bootconfig data when init memory is removed
- Fix bootconfig to loop only on subkeys
- Have kernel command lines override bootconfig options
- Increase field counts for synthetic events
- Have histograms dynamic allocate event elements to save space
- Fixes in testing and documentation
* tag 'trace-v5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing/boot: Fix to loop on only subkeys
selftests/ftrace: Exclude "(fault)" in testing add/remove eprobe events
tracing: Dynamically allocate the per-elt hist_elt_data array
tracing: synth events: increase max fields count
tools/bootconfig: Show whole test command for each test case
bootconfig: Fix missing return check of xbc_node_compose_key function
tools/bootconfig: Fix tracing_on option checking in ftrace2bconf.sh
docs: bootconfig: Add how to use bootconfig for kernel parameters
init/bootconfig: Reorder init parameter from bootconfig and cmdline
init: bootconfig: Remove all bootconfig data when the init memory is removed
tracing/osnoise: Fix missed cpus_read_unlock() in start_per_cpu_kthreads()
tracing: Fix some alloc_event_probe() error handling bugs
tracing: Add migrate-disabled counter to tracing output.
New drivers/devices
- Support for Renesas RZ/G2L dma controller
- New driver for AMD PTDMA controller
Updates:
- Big pile of idxd updates
- Updates for Altera driver, stm32-dma, dw etc
Also contains, bus_remove_return_void-5.15 to resolve dependencies
-----BEGIN PGP SIGNATURE-----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=RYbR
-----END PGP SIGNATURE-----
Merge tag 'dmaengine-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"New drivers/devices
- Support for Renesas RZ/G2L dma controller
- New driver for AMD PTDMA controller
Updates:
- Big pile of idxd updates
- Updates for Altera driver, stm32-dma, dw etc"
* tag 'dmaengine-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (83 commits)
dmaengine: sh: fix some NULL dereferences
dmaengine: sh: Fix unused initialization of pointer lmdesc
MAINTAINERS: Fix AMD PTDMA DRIVER entry
dmaengine: ptdma: remove PT_OFFSET to avoid redefnition
dmaengine: ptdma: Add debugfs entries for PTDMA
dmaengine: ptdma: register PTDMA controller as a DMA resource
dmaengine: ptdma: Initial driver for the AMD PTDMA
dmaengine: fsl-dpaa2-qdma: Fix spelling mistake "faile" -> "failed"
dmaengine: idxd: remove interrupt disable for dev_lock
dmaengine: idxd: remove interrupt disable for cmd_lock
dmaengine: idxd: fix setting up priv mode for dwq
dmaengine: xilinx_dma: Set DMA mask for coherent APIs
dmaengine: ti: k3-psil-j721e: Add entry for CSI2RX
dmaengine: sh: Add DMAC driver for RZ/G2L SoC
dmaengine: Extend the dma_slave_width for 128 bytes
dt-bindings: dma: Document RZ/G2L bindings
dmaengine: ioat: depends on !UML
dmaengine: idxd: set descriptor allocation size to threshold for swq
dmaengine: idxd: make submit failure path consistent on desc freeing
dmaengine: idxd: remove interrupt flag for completion list spinlock
...
- Add ACPI support to the PCI VMD driver (Rafael Wysocki).
- Rearrange suspend-to-idle support code to reflect the platform
firmware expectations on some AMD platforms (Mario Limonciello).
- Make SSDT overlays documentation follow the code documented by it
more closely (Andy Shevchenko).
-----BEGIN PGP SIGNATURE-----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=8lPe
-----END PGP SIGNATURE-----
Merge tag 'acpi-5.15-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more ACPI updates from Rafael Wysocki:
"These add ACPI support to the PCI VMD driver, improve suspend-to-idle
support for AMD platforms and update documentation.
Specifics:
- Add ACPI support to the PCI VMD driver (Rafael Wysocki)
- Rearrange suspend-to-idle support code to reflect the platform
firmware expectations on some AMD platforms (Mario Limonciello)
- Make SSDT overlays documentation follow the code documented by it
more closely (Andy Shevchenko)"
* tag 'acpi-5.15-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: PM: s2idle: Run both AMD and Microsoft methods if both are supported
Documentation: ACPI: Align the SSDT overlays file with the code
PCI: VMD: ACPI: Make ACPI companion lookup work for VMD bus
Merge more updates from Andrew Morton:
"147 patches, based on 7d2a07b769.
Subsystems affected by this patch series: mm (memory-hotplug, rmap,
ioremap, highmem, cleanups, secretmem, kfence, damon, and vmscan),
alpha, percpu, procfs, misc, core-kernel, MAINTAINERS, lib,
checkpatch, epoll, init, nilfs2, coredump, fork, pids, criu, kconfig,
selftests, ipc, and scripts"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (94 commits)
scripts: check_extable: fix typo in user error message
mm/workingset: correct kernel-doc notations
ipc: replace costly bailout check in sysvipc_find_ipc()
selftests/memfd: remove unused variable
Kconfig.debug: drop selecting non-existing HARDLOCKUP_DETECTOR_ARCH
configs: remove the obsolete CONFIG_INPUT_POLLDEV
prctl: allow to setup brk for et_dyn executables
pid: cleanup the stale comment mentioning pidmap_init().
kernel/fork.c: unexport get_{mm,task}_exe_file
coredump: fix memleak in dump_vma_snapshot()
fs/coredump.c: log if a core dump is aborted due to changed file permissions
nilfs2: use refcount_dec_and_lock() to fix potential UAF
nilfs2: fix memory leak in nilfs_sysfs_delete_snapshot_group
nilfs2: fix memory leak in nilfs_sysfs_create_snapshot_group
nilfs2: fix memory leak in nilfs_sysfs_delete_##name##_group
nilfs2: fix memory leak in nilfs_sysfs_create_##name##_group
nilfs2: fix NULL pointer in nilfs_##name##_attr_release
nilfs2: fix memory leak in nilfs_sysfs_create_device_group
trap: cleanup trap_init()
init: move usermodehelper_enable() to populate_rootfs()
...
Add a section to describe how to use the bootconfig for
specifying kernel and init parameters. This is an important
section because it is the reason why this document is under
the admin-guide.
Link: https://lkml.kernel.org/r/163077086399.222577.5881779375643977991.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The memory hot(un)plug documentation is outdated and incomplete. Most of
the content dates back to 2007, so it's time for a major overhaul.
Let's rewrite, reorganize and update most parts of the documentation. In
addition to memory hot(un)plug, also add some details regarding
ZONE_MOVABLE, with memory hotunplug being one of its main consumers.
Drop the file history, that information can more reliably be had from the
git log.
The style of the document is also properly fixed that e.g., "restview"
renders it cleanly now.
In the future, we might add some more details about virt users like
virtio-mem, the XEN balloon, the Hyper-V balloon and ppc64 dlpar.
Link: https://lkml.kernel.org/r/20210707073205.3835-3-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "memory-hotplug.rst: complete admin-guide overhaul", v3.
This patch (of 2):
We have the same content at Documentation/core-api/memory-hotplug.rst and
it doesn't fit into the admin-guide. The documentation was accidentially
duplicated when merging.
Link: https://lkml.kernel.org/r/20210707073205.3835-1-david@redhat.com
Link: https://lkml.kernel.org/r/20210707073205.3835-2-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Including:
- New DART IOMMU driver for Apple Silicon M1 chips.
- Optimizations for iommu_[map/unmap] performance
- Selective TLB flush support for the AMD IOMMU driver to make
it more efficient on emulated IOMMUs.
- Rework IOVA setup and default domain type setting to move more
code out of IOMMU drivers and to support runtime switching
between certain types of default domains.
- VT-d Updates from Lu Baolu:
- Update the virtual command related registers
- Enable Intel IOMMU scalable mode by default
- Preset A/D bits for user space DMA usage
- Allow devices to have more than 32 outstanding PRs
- Various cleanups
- ARM SMMU Updates from Will Deacon:
- SMMUv3: Minor optimisation to avoid zeroing struct members on CMD submission
- SMMUv3: Increased use of batched commands to reduce submission latency
- SMMUv3: Refactoring in preparation for ECMDQ support
- SMMUv2: Fix races when probing devices with identical StreamIDs
- SMMUv2: Optimise walk cache flushing for Qualcomm implementations
- SMMUv2: Allow deep sleep states for some Qualcomm SoCs with shared clocks
- Various smaller optimizations, cleanups, and fixes
-----BEGIN PGP SIGNATURE-----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=zVaQ
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
- New DART IOMMU driver for Apple Silicon M1 chips
- Optimizations for iommu_[map/unmap] performance
- Selective TLB flush support for the AMD IOMMU driver to make it more
efficient on emulated IOMMUs
- Rework IOVA setup and default domain type setting to move more code
out of IOMMU drivers and to support runtime switching between certain
types of default domains
- VT-d Updates from Lu Baolu:
- Update the virtual command related registers
- Enable Intel IOMMU scalable mode by default
- Preset A/D bits for user space DMA usage
- Allow devices to have more than 32 outstanding PRs
- Various cleanups
- ARM SMMU Updates from Will Deacon:
SMMUv3:
- Minor optimisation to avoid zeroing struct members on CMD submission
- Increased use of batched commands to reduce submission latency
- Refactoring in preparation for ECMDQ support
SMMUv2:
- Fix races when probing devices with identical StreamIDs
- Optimise walk cache flushing for Qualcomm implementations
- Allow deep sleep states for some Qualcomm SoCs with shared clocks
- Various smaller optimizations, cleanups, and fixes
* tag 'iommu-updates-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (85 commits)
iommu/io-pgtable: Abstract iommu_iotlb_gather access
iommu/arm-smmu: Fix missing unlock on error in arm_smmu_device_group()
iommu/vt-d: Add present bit check in pasid entry setup helpers
iommu/vt-d: Use pasid_pte_is_present() helper function
iommu/vt-d: Drop the kernel doc annotation
iommu/vt-d: Allow devices to have more than 32 outstanding PRs
iommu/vt-d: Preset A/D bits for user space DMA usage
iommu/vt-d: Enable Intel IOMMU scalable mode by default
iommu/vt-d: Refactor Kconfig a bit
iommu/vt-d: Remove unnecessary oom message
iommu/vt-d: Update the virtual command related registers
iommu: Allow enabling non-strict mode dynamically
iommu: Merge strictness and domain type configs
iommu: Only log strictness for DMA domains
iommu: Expose DMA domain strictness via sysfs
iommu: Express DMA strictness via the domain type
iommu/vt-d: Prepare for multiple DMA domain types
iommu/arm-smmu: Prepare for multiple DMA domain types
iommu/amd: Prepare for multiple DMA domain types
iommu: Introduce explicit type for non-strict DMA domains
...
Merge misc updates from Andrew Morton:
"173 patches.
Subsystems affected by this series: ia64, ocfs2, block, and mm (debug,
pagecache, gup, swap, shmem, memcg, selftests, pagemap, mremap,
bootmem, sparsemem, vmalloc, kasan, pagealloc, memory-failure,
hugetlb, userfaultfd, vmscan, compaction, mempolicy, memblock,
oom-kill, migration, ksm, percpu, vmstat, and madvise)"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (173 commits)
mm/madvise: add MADV_WILLNEED to process_madvise()
mm/vmstat: remove unneeded return value
mm/vmstat: simplify the array size calculation
mm/vmstat: correct some wrong comments
mm/percpu,c: remove obsolete comments of pcpu_chunk_populated()
selftests: vm: add COW time test for KSM pages
selftests: vm: add KSM merging time test
mm: KSM: fix data type
selftests: vm: add KSM merging across nodes test
selftests: vm: add KSM zero page merging test
selftests: vm: add KSM unmerge test
selftests: vm: add KSM merge test
mm/migrate: correct kernel-doc notation
mm: wire up syscall process_mrelease
mm: introduce process_mrelease system call
memblock: make memblock_find_in_range method private
mm/mempolicy.c: use in_task() in mempolicy_slab_node()
mm/mempolicy: unify the create() func for bind/interleave/prefer-many policies
mm/mempolicy: advertise new MPOL_PREFERRED_MANY
mm/hugetlb: add support for mempolicy MPOL_PREFERRED_MANY
...
Adds a new mode to the existing mempolicy modes, MPOL_PREFERRED_MANY.
MPOL_PREFERRED_MANY will be adequately documented in the internal
admin-guide with this patch. Eventually, the man pages for mbind(2),
get_mempolicy(2), set_mempolicy(2) and numactl(8) will also have text
about this mode. Those shall contain the canonical reference.
NUMA systems continue to become more prevalent. New technologies like
PMEM make finer grain control over memory access patterns increasingly
desirable. MPOL_PREFERRED_MANY allows userspace to specify a set of nodes
that will be tried first when performing allocations. If those
allocations fail, all remaining nodes will be tried. It's a straight
forward API which solves many of the presumptive needs of system
administrators wanting to optimize workloads on such machines. The mode
will work either per VMA, or per thread.
[Michal Hocko: refine kernel doc for MPOL_PREFERRED_MANY]
Link: https://lore.kernel.org/r/20200630212517.308045-13-ben.widawsky@intel.com
Link: https://lkml.kernel.org/r/1627970362-61305-5-git-send-email-feng.tang@intel.com
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Signed-off-by: Feng Tang <feng.tang@intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Heiko Carstens